drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 206 insertions, 0 deletions

diff --git a/drivers/accessibility/speakup/Kconfig b/drivers/accessibility/speakup/Kconfig
new file mode 100644
index 000000000..e84fb617a
--- /dev/null
+++ b/drivers/accessibility/speakup/Kconfig
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0
+menu "Speakup console speech"
+
+config SPEAKUP
+	depends on VT
+	tristate "Speakup core"
+	help
+		This is the Speakup screen reader.  Think of it as a
+		video console for blind people.  If built in to the
+		kernel, it can speak everything on the text console from
+		boot up to shutdown.  For more information on Speakup,
+		point your browser at <http://www.linux-speakup.org/>.
+		There is also a mailing list at the above url that you
+		can subscribe to.
+
+		Supported synthesizers are accent sa, accent pc,
+		appollo II., Auddapter, Braille 'n Speak, Dectalk
+		external (old), Dectalk PC (full length isa board),
+		Dectalk express, Doubletalk, Doubletalk LT or
+		Litetalk, Keynote Gold internal PC, software
+		synthesizers, Speakout, transport, and a dummy module
+		that can be used with a plain text terminal.
+
+		Speakup can either be built in or compiled as a module
+		by answering y or m.  If you answer y here, then you
+		must answer either y or m to at least one of the
+		synthesizer drivers below.  If you answer m here, then
+		the synthesizer drivers below can only be built as
+		modules.
+
+		These drivers are not standalone drivers, but must be
+		used in conjunction with Speakup.  Think of them as
+		video cards for blind people.
+
+
+		The Dectalk pc driver can only be built as a module, and
+		requires software to be pre-loaded on to the card before
+		the module can be loaded.  See the decpc choice below
+		for more details.
+
+		If you are not a blind person, or don't have access to
+		one of the listed synthesizers, you should say n.
+
+if SPEAKUP
+
+config SPEAKUP_SERIALIO
+	def_bool y
+	depends on ISA || COMPILE_TEST
+	depends on HAS_IOPORT
+
+config SPEAKUP_SYNTH_ACNTSA
+	tristate "Accent SA synthesizer support"
+	help
+		This is the Speakup driver for the Accent SA
+		synthesizer.  You can say y to build it into the kernel,
+		or m to build it as a module.  See the configuration
+		help on the Speakup choice above for more info.
+
+config SPEAKUP_SYNTH_ACNTPC
+	tristate "Accent PC synthesizer support"
+	depends on SPEAKUP_SERIALIO
+	help
+		This is the Speakup driver for the accent pc
+		synthesizer.  You can say y to build it into the kernel,
+		or m to build it as a module.  See the configuration
+		help on the Speakup choice above for more info.
+
+config SPEAKUP_SYNTH_APOLLO
+	tristate "Apollo II synthesizer support"
+	help
+		This is the Speakup driver for the Apollo II
+		synthesizer.  You can say y to build it into the kernel,
+		or m to build it as a module.  See the configuration
+		help on the Speakup choice above for more info.
+
+config SPEAKUP_SYNTH_AUDPTR
+	tristate "Audapter synthesizer support"
+	help
+		This is the Speakup driver for the Audapter synthesizer.
+		 You can say y to build it into the kernel, or m to
+		build it as a module.  See the configuration help on the
+		Speakup choice above for more info.
+
+config SPEAKUP_SYNTH_BNS
+	tristate "Braille 'n' Speak synthesizer support"
+	help
+		This is the Speakup driver for the Braille 'n' Speak
+		synthesizer.  You can say y to build it into the kernel,
+		or m to build it as a module.  See the configuration
+		help on the Speakup choice above for more info.
+
+config SPEAKUP_SYNTH_DECTLK
+	tristate "DECtalk Express synthesizer support"
+	help
+
+		This is the Speakup driver for the DecTalk Express
+		synthesizer.  You can say y to build it into the kernel,
+		or m to build it as a module.  See the configuration
+		help on the Speakup choice above for more info.
+
+config SPEAKUP_SYNTH_DECEXT
+	tristate "DECtalk External (old) synthesizer support"
+	help
+
+		This is the Speakup driver for the DecTalk External
+		(old) synthesizer.  You can say y to build it into the
+		kernel, or m to build it as a module.  See the
+		configuration help on the Speakup choice above for more
+		info.
+
+config SPEAKUP_SYNTH_DECPC
+	depends on m
+	depends on SPEAKUP_SERIALIO
+	tristate "DECtalk PC (big ISA card) synthesizer support"
+	help
+
+		This is the Speakup driver for the DecTalk PC (full
+		length ISA) synthesizer.  You can say m to build it as
+		a module.  See the configuration help on the Speakup
+		choice above for more info.
+
+		In order to use the DecTalk PC driver, you must download
+		the dec_pc.tgz file from linux-speakup.org.  It is in
+		the pub/linux/goodies directory.  The dec_pc.tgz file
+		contains the software which must be pre-loaded on to the
+		DecTalk PC board in order to use it with this driver.
+		This driver must be built as a module, and can not be
+		loaded until the file system is mounted and the DecTalk
+		PC software has been pre-loaded on to the board.
+
+		See the README file in the dec_pc.tgz file for more
+		details.
+
+config SPEAKUP_SYNTH_DTLK
+	tristate "DoubleTalk PC synthesizer support"
+	depends on SPEAKUP_SERIALIO
+	help
+
+		This is the Speakup driver for the internal DoubleTalk
+		PC synthesizer.  You can say y to build it into the
+		kernel, or m to build it as a module.  See the
+		configuration help on the Speakup choice above for more
+		info.
+
+config SPEAKUP_SYNTH_KEYPC
+	tristate "Keynote Gold PC synthesizer support"
+	depends on SPEAKUP_SERIALIO
+	help
+
+		This is the Speakup driver for the Keynote Gold
+		PC synthesizer.  You can say y to build it into the
+		kernel, or m to build it as a module.  See the
+		configuration help on the Speakup choice above for more
+		info.
+
+config SPEAKUP_SYNTH_LTLK
+	tristate "DoubleTalk LT/LiteTalk synthesizer support"
+help
+
+		This is the Speakup driver for the LiteTalk/DoubleTalk
+		LT synthesizer.  You can say y to build it into the
+		kernel, or m to build it as a module.  See the
+		configuration help on the Speakup choice above for more
+		info.
+
+config SPEAKUP_SYNTH_SOFT
+	tristate "Userspace software synthesizer support"
+	help
+
+		This is the software synthesizer device node.  It will
+		register a device /dev/softsynth which midware programs
+		and speech daemons may open and read to provide kernel
+		output to software synths such as espeak, festival,
+		flite and so forth.  You can select 'y' or 'm' to have
+		it built-in to the kernel or loaded as a module.
+
+config SPEAKUP_SYNTH_SPKOUT
+	tristate "Speak Out synthesizer support"
+	help
+
+		This is the Speakup driver for the Speakout synthesizer.
+		 You can say y to build it into the kernel, or m to
+		build it as a module.  See the configuration help on the
+		Speakup choice above for more info.
+
+config SPEAKUP_SYNTH_TXPRT
+	tristate "Transport synthesizer support"
+	help
+
+		This is the Speakup driver for the Transport
+		synthesizer.  You can say y to build it into the kernel,
+		or m to build it as a module.  See the configuration
+		help on the Speakup choice above for more info.
+
+config SPEAKUP_SYNTH_DUMMY
+	tristate "Dummy synthesizer driver (for testing)"
+	help
+
+		This is a dummy Speakup driver for plugging a mere serial
+		terminal.  This is handy if you want to test speakup but
+		don't have the hardware.  You can say y to build it into
+		the kernel, or m to build it as a module.  See the
+		configuration help on the Speakup choice above for more info.
+
+endif	# SPEAKUP
+endmenu