sched/cache: Keep nr_pref_llc_running in the runnable domain, to fix LLC mis-scheduling buggrafted

alb_break_llc() decides whether to break LLC preference during active
load balance. It does so by testing that every runnable fair task on the
source rq prefers its LLC:

	env->src_rq->nr_pref_llc_running == env->src_rq->cfs.h_nr_runnable

But the two counters cover different sets. nr_pref_llc_running is updated
in account_llc_enqueue()/account_llc_dequeue(), next to cfs_rq->nr_queued,
so it follows queued tasks. h_nr_runnable is updated in set_delayed()/
clear_delayed() and drops delay-dequeued tasks.

So under DELAY_DEQUEUE, a preferring task that goes to sleep stays counted
in nr_pref_llc_running while h_nr_runnable falls. The equality then breaks,
alb_break_llc() returns false, and active balance is free to pull a task
off its preferred LLC. Active balance only moves runnable tasks, and this
is the only LLC check it consults: once the stopper runs, LBF_ACTIVE_LB
skips the per-task test in can_migrate_task(). The runnable set is the one
we want.

Fix it on the counter side. A task should be counted in
nr_pref_llc_running exactly while it is both queued on its preferred LLC
(pref_llc_queued) and runnable (!sched_delayed). Define that membership
once in task_pref_llc_runnable(), and adjust the counter only through
pref_llc_running_inc()/pref_llc_running_dec() from the four sites that
change either input: account_llc_enqueue(), account_llc_dequeue(),
set_delayed() and clear_delayed(). Gating every update on the same
predicate keeps the delay, wake and dequeue paths from double-counting
or underflowing; see the comments at those sites for the ordering.

nr_llc_running and sd->llc_counts are not touched and stay on queued
semantics.

Fixes: 714059f79ff0 ("sched/cache: Handle moving single tasks to/from their preferred LLC")
Closes: https://lore.kernel.org/lkml/20260827135000.735138-1-zhanxusheng@xiaomi.com/
Reported-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Suggested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kayra Cizmeci <kayracizmeci@gmail.com>
Cc: <stable@kernel.org> # v7.2.x
Link: https://patch.msgid.link/06af61afedac32e6477f57feb4d658f6c411c3af.1790035273.git.tim.c.chen@linux.intel.com

1 files changed, 208 insertions, 0 deletions

diff --git a/block/blk-crypto-sysfs.c b/block/blk-crypto-sysfs.c
new file mode 100644
index 000000000..b069c418b
--- /dev/null
+++ b/block/blk-crypto-sysfs.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Google LLC
+ *
+ * sysfs support for blk-crypto.  This file contains the code which exports the
+ * crypto capabilities of devices via /sys/block/$disk/queue/crypto/.
+ */
+
+#include <linux/blk-crypto-profile.h>
+
+#include "blk-crypto-internal.h"
+
+struct blk_crypto_kobj {
+	struct kobject kobj;
+	struct blk_crypto_profile *profile;
+};
+
+struct blk_crypto_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct blk_crypto_profile *profile,
+			const struct blk_crypto_attr *attr, char *page);
+};
+
+static struct blk_crypto_profile *kobj_to_crypto_profile(struct kobject *kobj)
+{
+	return container_of(kobj, struct blk_crypto_kobj, kobj)->profile;
+}
+
+static const struct blk_crypto_attr *attr_to_crypto_attr(const struct attribute *attr)
+{
+	return container_of_const(attr, struct blk_crypto_attr, attr);
+}
+
+static ssize_t hw_wrapped_keys_show(struct blk_crypto_profile *profile,
+				    const struct blk_crypto_attr *attr, char *page)
+{
+	/* Always show supported, since the file doesn't exist otherwise. */
+	return sysfs_emit(page, "supported\n");
+}
+
+static ssize_t max_dun_bits_show(struct blk_crypto_profile *profile,
+				 const struct blk_crypto_attr *attr, char *page)
+{
+	return sysfs_emit(page, "%u\n", 8 * profile->max_dun_bytes_supported);
+}
+
+static ssize_t num_keyslots_show(struct blk_crypto_profile *profile,
+				 const struct blk_crypto_attr *attr, char *page)
+{
+	return sysfs_emit(page, "%u\n", profile->num_slots);
+}
+
+static ssize_t raw_keys_show(struct blk_crypto_profile *profile,
+			     const struct blk_crypto_attr *attr, char *page)
+{
+	/* Always show supported, since the file doesn't exist otherwise. */
+	return sysfs_emit(page, "supported\n");
+}
+
+#define BLK_CRYPTO_RO_ATTR(_name) \
+	static const struct blk_crypto_attr _name##_attr = __ATTR_RO(_name)
+
+BLK_CRYPTO_RO_ATTR(hw_wrapped_keys);
+BLK_CRYPTO_RO_ATTR(max_dun_bits);
+BLK_CRYPTO_RO_ATTR(num_keyslots);
+BLK_CRYPTO_RO_ATTR(raw_keys);
+
+static umode_t blk_crypto_is_visible(struct kobject *kobj,
+				     const struct attribute *attr, int n)
+{
+	struct blk_crypto_profile *profile = kobj_to_crypto_profile(kobj);
+	const struct blk_crypto_attr *a = attr_to_crypto_attr(attr);
+
+	if (a == &hw_wrapped_keys_attr &&
+	    !(profile->key_types_supported & BLK_CRYPTO_KEY_TYPE_HW_WRAPPED))
+		return 0;
+	if (a == &raw_keys_attr &&
+	    !(profile->key_types_supported & BLK_CRYPTO_KEY_TYPE_RAW))
+		return 0;
+
+	return 0444;
+}
+
+static const struct attribute *const blk_crypto_attrs[] = {
+	&hw_wrapped_keys_attr.attr,
+	&max_dun_bits_attr.attr,
+	&num_keyslots_attr.attr,
+	&raw_keys_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group blk_crypto_attr_group = {
+	.attrs_const = blk_crypto_attrs,
+	.is_visible_const = blk_crypto_is_visible,
+};
+
+/*
+ * The encryption mode attributes.  To avoid hard-coding the list of encryption
+ * modes, these are initialized at boot time by blk_crypto_sysfs_init().
+ */
+static struct blk_crypto_attr __blk_crypto_mode_attrs[BLK_ENCRYPTION_MODE_MAX];
+static const struct attribute *blk_crypto_mode_attrs[BLK_ENCRYPTION_MODE_MAX + 1];
+
+static umode_t blk_crypto_mode_is_visible(struct kobject *kobj,
+					  const struct attribute *attr, int n)
+{
+	struct blk_crypto_profile *profile = kobj_to_crypto_profile(kobj);
+	const struct blk_crypto_attr *a = attr_to_crypto_attr(attr);
+	int mode_num = a - __blk_crypto_mode_attrs;
+
+	if (profile->modes_supported[mode_num])
+		return 0444;
+	return 0;
+}
+
+static ssize_t blk_crypto_mode_show(struct blk_crypto_profile *profile,
+				    const struct blk_crypto_attr *attr, char *page)
+{
+	int mode_num = attr - __blk_crypto_mode_attrs;
+
+	return sysfs_emit(page, "0x%x\n", profile->modes_supported[mode_num]);
+}
+
+static const struct attribute_group blk_crypto_modes_attr_group = {
+	.name = "modes",
+	.attrs_const = blk_crypto_mode_attrs,
+	.is_visible_const = blk_crypto_mode_is_visible,
+};
+
+static const struct attribute_group *blk_crypto_attr_groups[] = {
+	&blk_crypto_attr_group,
+	&blk_crypto_modes_attr_group,
+	NULL,
+};
+
+static ssize_t blk_crypto_attr_show(struct kobject *kobj,
+				    struct attribute *attr, char *page)
+{
+	struct blk_crypto_profile *profile = kobj_to_crypto_profile(kobj);
+	const struct blk_crypto_attr *a = attr_to_crypto_attr(attr);
+
+	return a->show(profile, a, page);
+}
+
+static const struct sysfs_ops blk_crypto_attr_ops = {
+	.show = blk_crypto_attr_show,
+};
+
+static void blk_crypto_release(struct kobject *kobj)
+{
+	kfree(container_of(kobj, struct blk_crypto_kobj, kobj));
+}
+
+static const struct kobj_type blk_crypto_ktype = {
+	.default_groups = blk_crypto_attr_groups,
+	.sysfs_ops	= &blk_crypto_attr_ops,
+	.release	= blk_crypto_release,
+};
+
+/*
+ * If the request_queue has a blk_crypto_profile, create the "crypto"
+ * subdirectory in sysfs (/sys/block/$disk/queue/crypto/).
+ */
+int blk_crypto_sysfs_register(struct gendisk *disk)
+{
+	struct request_queue *q = disk->queue;
+	struct blk_crypto_kobj *obj;
+	int err;
+
+	if (!q->crypto_profile)
+		return 0;
+
+	obj = kzalloc_obj(*obj);
+	if (!obj)
+		return -ENOMEM;
+	obj->profile = q->crypto_profile;
+
+	err = kobject_init_and_add(&obj->kobj, &blk_crypto_ktype,
+				   &disk->queue_kobj, "crypto");
+	if (err) {
+		kobject_put(&obj->kobj);
+		return err;
+	}
+	q->crypto_kobject = &obj->kobj;
+	return 0;
+}
+
+void blk_crypto_sysfs_unregister(struct gendisk *disk)
+{
+	kobject_put(disk->queue->crypto_kobject);
+}
+
+static int __init blk_crypto_sysfs_init(void)
+{
+	int i;
+
+	BUILD_BUG_ON(BLK_ENCRYPTION_MODE_INVALID != 0);
+	for (i = 1; i < BLK_ENCRYPTION_MODE_MAX; i++) {
+		struct blk_crypto_attr *attr = &__blk_crypto_mode_attrs[i];
+
+		attr->attr.name = blk_crypto_modes[i].name;
+		attr->attr.mode = 0444;
+		attr->show = blk_crypto_mode_show;
+		blk_crypto_mode_attrs[i - 1] = &attr->attr;
+	}
+	return 0;
+}
+subsys_initcall(blk_crypto_sysfs_init);