Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 134 insertions, 0 deletions

diff --git a/arch/xtensa/lib/mulsi3.S b/arch/xtensa/lib/mulsi3.S
new file mode 100644
index 000000000..c6b4fd46b
--- /dev/null
+++ b/arch/xtensa/lib/mulsi3.S
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later WITH GCC-exception-2.0 */
+#include <linux/linkage.h>
+#include <asm/asmmacro.h>
+#include <asm/core.h>
+
+	.macro	do_addx2 dst, as, at, tmp
+#if XCHAL_HAVE_ADDX
+	addx2	\dst, \as, \at
+#else
+	slli	\tmp, \as, 1
+	add	\dst, \tmp, \at
+#endif
+	.endm
+
+	.macro	do_addx4 dst, as, at, tmp
+#if XCHAL_HAVE_ADDX
+	addx4	\dst, \as, \at
+#else
+	slli	\tmp, \as, 2
+	add	\dst, \tmp, \at
+#endif
+	.endm
+
+	.macro	do_addx8 dst, as, at, tmp
+#if XCHAL_HAVE_ADDX
+	addx8	\dst, \as, \at
+#else
+	slli	\tmp, \as, 3
+	add	\dst, \tmp, \at
+#endif
+	.endm
+
+ENTRY(__mulsi3)
+
+	abi_entry_default
+
+#if XCHAL_HAVE_MUL32
+	mull	a2, a2, a3
+
+#elif XCHAL_HAVE_MUL16
+	or	a4, a2, a3
+	srai	a4, a4, 16
+	bnez	a4, .LMUL16
+	mul16u	a2, a2, a3
+	abi_ret_default
+.LMUL16:
+	srai	a4, a2, 16
+	srai	a5, a3, 16
+	mul16u	a7, a4, a3
+	mul16u	a6, a5, a2
+	mul16u	a4, a2, a3
+	add	a7, a7, a6
+	slli	a7, a7, 16
+	add	a2, a7, a4
+
+#elif XCHAL_HAVE_MAC16
+	mul.aa.hl a2, a3
+	mula.aa.lh a2, a3
+	rsr	a5, ACCLO
+	umul.aa.ll a2, a3
+	rsr	a4, ACCLO
+	slli	a5, a5, 16
+	add	a2, a4, a5
+
+#else /* !MUL32 && !MUL16 && !MAC16 */
+
+	/* Multiply one bit at a time, but unroll the loop 4x to better
+	   exploit the addx instructions and avoid overhead.
+	   Peel the first iteration to save a cycle on init.  */
+
+	/* Avoid negative numbers.  */
+	xor	a5, a2, a3	/* Top bit is 1 if one input is negative.  */
+	do_abs	a3, a3, a6
+	do_abs	a2, a2, a6
+
+	/* Swap so the second argument is smaller.  */
+	sub	a7, a2, a3
+	mov	a4, a3
+	movgez	a4, a2, a7	/* a4 = max (a2, a3) */
+	movltz	a3, a2, a7	/* a3 = min (a2, a3) */
+
+	movi	a2, 0
+	extui	a6, a3, 0, 1
+	movnez	a2, a4, a6
+
+	do_addx2 a7, a4, a2, a7
+	extui	a6, a3, 1, 1
+	movnez	a2, a7, a6
+
+	do_addx4 a7, a4, a2, a7
+	extui	a6, a3, 2, 1
+	movnez	a2, a7, a6
+
+	do_addx8 a7, a4, a2, a7
+	extui	a6, a3, 3, 1
+	movnez	a2, a7, a6
+
+	bgeui	a3, 16, .Lmult_main_loop
+	neg	a3, a2
+	movltz	a2, a3, a5
+	abi_ret_default
+
+	.align	4
+.Lmult_main_loop:
+	srli	a3, a3, 4
+	slli	a4, a4, 4
+
+	add	a7, a4, a2
+	extui	a6, a3, 0, 1
+	movnez	a2, a7, a6
+
+	do_addx2 a7, a4, a2, a7
+	extui	a6, a3, 1, 1
+	movnez	a2, a7, a6
+
+	do_addx4 a7, a4, a2, a7
+	extui	a6, a3, 2, 1
+	movnez	a2, a7, a6
+
+	do_addx8 a7, a4, a2, a7
+	extui	a6, a3, 3, 1
+	movnez	a2, a7, a6
+
+	bgeui	a3, 16, .Lmult_main_loop
+
+	neg	a3, a2
+	movltz	a2, a3, a5
+
+#endif /* !MUL32 && !MUL16 && !MAC16 */
+
+	abi_ret_default
+
+ENDPROC(__mulsi3)
+EXPORT_SYMBOL(__mulsi3)