Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 53 insertions, 0 deletions

diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile
new file mode 100644
index 000000000..d8b0fadf4
--- /dev/null
+++ b/arch/xtensa/boot/Makefile
@@ -0,0 +1,53 @@
+#
+# arch/xtensa/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+
+# KBUILD_CFLAGS used when building rest of boot (takes effect recursively)
+KBUILD_CFLAGS	+= -fno-builtin
+
+subdir-y	:= lib
+targets		+= vmlinux.bin vmlinux.bin.gz
+targets		+= uImage xipImage
+
+# Subdirs for the boot loader(s)
+
+boot-$(CONFIG_XTENSA_PLATFORM_ISS)    += Image
+boot-$(CONFIG_XTENSA_PLATFORM_XT2000) += Image zImage uImage
+boot-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += Image zImage uImage
+
+all: $(boot-y)
+Image: boot-elf
+zImage: boot-redboot
+uImage: $(obj)/uImage
+xipImage: $(obj)/xipImage
+
+boot-elf boot-redboot: $(addprefix $(obj)/,$(subdir-y))
+	$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
+
+OBJCOPYFLAGS = --strip-all -R .comment -R .notes -O binary
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+boot-elf: $(obj)/vmlinux.bin
+boot-redboot: $(obj)/vmlinux.bin.gz
+
+UIMAGE_LOADADDR = $(CONFIG_KERNEL_LOAD_ADDRESS)
+UIMAGE_COMPRESSION = gzip
+
+$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,uimage)
+	$(Q)$(kecho) '  Kernel: $@ is ready'
+
+$(obj)/xipImage: vmlinux FORCE
+	$(call if_changed,objcopy)
+	$(Q)$(kecho) '  Kernel: $@ is ready'