Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 48 insertions, 0 deletions

diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug
new file mode 100644
index 000000000..e84172a77
--- /dev/null
+++ b/arch/xtensa/Kconfig.debug
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config DEBUG_TLB_SANITY
+	bool "Debug TLB sanity"
+	depends on DEBUG_KERNEL && MMU
+	help
+	  Enable this to turn on TLB sanity check on each entry to userspace.
+	  This check can spot missing TLB invalidation/wrong PTE permissions/
+	  premature page freeing.
+
+	  If unsure, say N.
+
+config LD_NO_RELAX
+	bool "Disable linker relaxation"
+	default y
+	help
+	  Enable this function to disable link-time optimizations.
+	  The default linker behavior is to combine identical literal
+	  values to reduce code size and remove unnecessary overhead from
+	  assembler-generated 'longcall' sequences.
+	  Enabling this option improves the link time but increases the
+	  code size, and possibly execution time.
+
+config S32C1I_SELFTEST
+	bool "Perform S32C1I instruction self-test at boot"
+	default y
+	help
+	  Enable this option to test S32C1I instruction behavior at boot.
+	  Correct operation of this instruction requires some cooperation from hardware
+	  external to the processor (such as bus bridge, bus fabric, or memory controller).
+	  It is easy to make wrong hardware configuration, this test should catch it early.
+
+	  Say 'N' on stable hardware.
+
+config PRINT_STACK_DEPTH
+	int "Stack depth to print" if DEBUG_KERNEL
+	default 64
+	help
+	  This option allows you to set the stack depth that the kernel
+	  prints in stack traces.
+
+config PRINT_USER_CODE_ON_UNHANDLED_EXCEPTION
+	bool "Dump user code around unhandled exception address"
+	help
+	  Enable this option to display user code around PC of the unhandled
+	  exception (starting at address aligned on 16 byte boundary).
+	  This may simplify finding faulting code in the absence of other
+	  debug facilities.