Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 229 insertions, 0 deletions

diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
new file mode 100644
index 000000000..70ad000e9
--- /dev/null
+++ b/arch/x86/lib/delay.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	Precise Delay Loops for i386
+ *
+ *	Copyright (C) 1993 Linus Torvalds
+ *	Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *	Copyright (C) 2008 Jiri Hladky <hladky _dot_ jiri _at_ gmail _dot_ com>
+ *
+ *	The __delay function must _NOT_ be inlined as its execution time
+ *	depends wildly on alignment on many x86 processors. The additional
+ *	jump magic is needed to get the timing stable on all the CPU's
+ *	we have to worry about.
+ */
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/preempt.h>
+#include <linux/delay.h>
+
+#include <asm/processor.h>
+#include <asm/timer.h>
+#include <asm/mwait.h>
+
+#ifdef CONFIG_SMP
+# include <asm/smp.h>
+#endif
+
+static void delay_loop(u64 __loops);
+
+/*
+ * Calibration and selection of the delay mechanism happens only once
+ * during boot.
+ */
+static void (*delay_fn)(u64) __ro_after_init = delay_loop;
+static void (*delay_halt_fn)(u64 start, u64 cycles) __ro_after_init;
+
+/* simple loop based delay: */
+static void delay_loop(u64 __loops)
+{
+	unsigned long loops = (unsigned long)__loops;
+
+	asm volatile(
+		"	test %0,%0	\n"
+		"	jz 3f		\n"
+		"	jmp 1f		\n"
+
+		".align 16		\n"
+		"1:	jmp 2f		\n"
+
+		".align 16		\n"
+		"2:	dec %0		\n"
+		"	jnz 2b		\n"
+		"3:	dec %0		\n"
+
+		: "+a" (loops)
+		:
+	);
+}
+
+/* TSC based delay: */
+static void delay_tsc(u64 cycles)
+{
+	u64 bclock, now;
+	int cpu;
+
+	preempt_disable();
+	cpu = smp_processor_id();
+	bclock = rdtsc_ordered();
+	for (;;) {
+		now = rdtsc_ordered();
+		if ((now - bclock) >= cycles)
+			break;
+
+		/* Allow RT tasks to run */
+		preempt_enable();
+		native_pause();
+		preempt_disable();
+
+		/*
+		 * It is possible that we moved to another CPU, and
+		 * since TSC's are per-cpu we need to calculate
+		 * that. The delay must guarantee that we wait "at
+		 * least" the amount of time. Being moved to another
+		 * CPU could make the wait longer but we just need to
+		 * make sure we waited long enough. Rebalance the
+		 * counter for this CPU.
+		 */
+		if (unlikely(cpu != smp_processor_id())) {
+			cycles -= (now - bclock);
+			cpu = smp_processor_id();
+			bclock = rdtsc_ordered();
+		}
+	}
+	preempt_enable();
+}
+
+/*
+ * On Intel the TPAUSE instruction waits until any of:
+ * 1) the TSC counter exceeds the value provided in EDX:EAX
+ * 2) global timeout in IA32_UMWAIT_CONTROL is exceeded
+ * 3) an external interrupt occurs
+ */
+static void delay_halt_tpause(u64 start, u64 cycles)
+{
+	u64 until = start + cycles;
+	u32 eax, edx;
+
+	eax = lower_32_bits(until);
+	edx = upper_32_bits(until);
+
+	/*
+	 * Hard code the deeper (C0.2) sleep state because exit latency is
+	 * small compared to the "microseconds" that usleep() will delay.
+	 */
+	__tpause(TPAUSE_C02_STATE, edx, eax);
+}
+
+/*
+ * On some AMD platforms, MWAITX has a configurable 32-bit timer, that
+ * counts with TSC frequency. The input value is the number of TSC cycles
+ * to wait. MWAITX will also exit when the timer expires.
+ */
+static void delay_halt_mwaitx(u64 unused, u64 cycles)
+{
+	u64 delay;
+
+	delay = min_t(u64, MWAITX_MAX_WAIT_CYCLES, cycles);
+	/*
+	 * Use cpu_tss_rw as a cacheline-aligned, seldom accessed per-cpu
+	 * variable as the monitor target.
+	 */
+	__monitorx(raw_cpu_ptr(&cpu_tss_rw), 0, 0);
+
+	/*
+	 * AMD, like Intel, supports the EAX hint and EAX=0xf means, do not
+	 * enter any deep C-state and we use it here in delay() to minimize
+	 * wakeup latency.
+	 */
+	__mwaitx(MWAITX_DISABLE_CSTATES, delay, MWAITX_ECX_TIMER_ENABLE);
+}
+
+/*
+ * Call a vendor specific function to delay for a given amount of time. Because
+ * these functions may return earlier than requested, check for actual elapsed
+ * time and call again until done.
+ */
+static void delay_halt(u64 __cycles)
+{
+	u64 start, end, cycles = __cycles;
+
+	/*
+	 * Timer value of 0 causes MWAITX to wait indefinitely, unless there
+	 * is a store on the memory monitored by MONITORX.
+	 */
+	if (!cycles)
+		return;
+
+	start = rdtsc_ordered();
+
+	for (;;) {
+		delay_halt_fn(start, cycles);
+		end = rdtsc_ordered();
+
+		if (cycles <= end - start)
+			break;
+
+		cycles -= end - start;
+		start = end;
+	}
+}
+
+void __init use_tsc_delay(void)
+{
+	if (delay_fn == delay_loop)
+		delay_fn = delay_tsc;
+}
+
+void __init use_tpause_delay(void)
+{
+	delay_halt_fn = delay_halt_tpause;
+	delay_fn = delay_halt;
+}
+
+void use_mwaitx_delay(void)
+{
+	delay_halt_fn = delay_halt_mwaitx;
+	delay_fn = delay_halt;
+}
+
+bool delay_read_timer(unsigned long *timer_val)
+{
+	if (delay_fn == delay_tsc) {
+		*timer_val = rdtsc();
+		return true;
+	}
+	return false;
+}
+
+void __delay(unsigned long loops)
+{
+	delay_fn(loops);
+}
+EXPORT_SYMBOL(__delay);
+
+noinline void __const_udelay(unsigned long xloops)
+{
+	unsigned long lpj = this_cpu_read(cpu_info.loops_per_jiffy) ? : loops_per_jiffy;
+	int d0;
+
+	xloops *= 4;
+	asm("mull %%edx"
+		:"=d" (xloops), "=&a" (d0)
+		:"1" (xloops), "0" (lpj * (HZ / 4)));
+
+	__delay(++xloops);
+}
+EXPORT_SYMBOL(__const_udelay);
+
+void __udelay(unsigned long usecs)
+{
+	__const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long nsecs)
+{
+	__const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
+}
+EXPORT_SYMBOL(__ndelay);