diff options
| author | Niklas Cassel <cassel@kernel.org> | 2026-09-16 15:00:32 +0200 |
|---|---|---|
| committer | Niklas Cassel <cassel@kernel.org> | 2026-09-16 16:18:00 +0200 |
| commit | 8d836581f9b1f57ceaa2b47654754ef1260b410b (patch) | |
| tree | 1dbd4d0dfb99c2e238356cbe947e5b0be3e3a571 /arch/x86/boot/startup | |
| download | linux-stable-8d836581f9b1f57ceaa2b47654754ef1260b410b.tar.gz linux-stable-8d836581f9b1f57ceaa2b47654754ef1260b410b.zip | |
ata: libata-scsi: fix ata_dsm_trim_pages() kernel-docgrafted
make htmldocs fails with:
Documentation/driver-api/libata:604: ./drivers/ata/libata-scsi.c:2301:
ERROR: Unexpected indentation. [docutils]
The Return: section of ata_dsm_trim_pages() ends its first sentence with
a colon and continues with an indented bullet list. reStructuredText
requires a blank line before an indented block, so docutils chokes on
the list.
Simply adding the missing blank line does not work either: Return: is a
kernel-doc "special section", which is terminated by the first blank
line, so the bullet list would end up in the Description section,
detached from the sentence introducing it.
Spell the two bounds out as prose instead, so that the Return: section
stays self-contained. Documentation-only change.
Fixes: e64e6b5dc867 ("ata: libata-scsi: scale DSM TRIM payload by MAX PAGES PER DSM COMMAND")
Reported-by: Thomas Huth <thuth@redhat.com>
Closes: https://lore.kernel.org/linux-ide/b0a0b8e8-cc4f-4c7b-8bc5-fee0712d405a@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20260916130031.29990-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Diffstat (limited to 'arch/x86/boot/startup')
| -rw-r--r-- | arch/x86/boot/startup/Makefile | 52 | ||||
| -rw-r--r-- | arch/x86/boot/startup/efi-mixed.S | 253 | ||||
| -rw-r--r-- | arch/x86/boot/startup/exports.h | 14 | ||||
| -rw-r--r-- | arch/x86/boot/startup/gdt_idt.c | 71 | ||||
| -rw-r--r-- | arch/x86/boot/startup/la57toggle.S | 111 | ||||
| -rw-r--r-- | arch/x86/boot/startup/map_kernel.c | 217 | ||||
| -rw-r--r-- | arch/x86/boot/startup/sev-shared.c | 762 | ||||
| -rw-r--r-- | arch/x86/boot/startup/sev-startup.c | 221 | ||||
| -rw-r--r-- | arch/x86/boot/startup/sme.c | 577 |
9 files changed, 2278 insertions, 0 deletions
diff --git a/arch/x86/boot/startup/Makefile b/arch/x86/boot/startup/Makefile new file mode 100644 index 000000000..5e499cfb2 --- /dev/null +++ b/arch/x86/boot/startup/Makefile @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0 + +KBUILD_AFLAGS += -D__DISABLE_EXPORTS +KBUILD_CFLAGS += -D__DISABLE_EXPORTS -mcmodel=small -fPIC \ + -Os -DDISABLE_BRANCH_PROFILING \ + $(DISABLE_STACKLEAK_PLUGIN) \ + $(DISABLE_LATENT_ENTROPY_PLUGIN) \ + -fno-stack-protector -D__NO_FORTIFY \ + -fno-jump-tables \ + -include $(srctree)/include/linux/hidden.h + +# disable ftrace hooks and LTO +KBUILD_CFLAGS := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) +KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_LTO),$(KBUILD_CFLAGS)) +KASAN_SANITIZE := n +KCSAN_SANITIZE := n +KMSAN_SANITIZE := n +UBSAN_SANITIZE := n +KCOV_INSTRUMENT := n + +obj-$(CONFIG_X86_64) += gdt_idt.o map_kernel.o +obj-$(CONFIG_AMD_MEM_ENCRYPT) += sme.o sev-startup.o +pi-objs := $(patsubst %.o,$(obj)/%.o,$(obj-y)) + +lib-$(CONFIG_X86_64) += la57toggle.o +lib-$(CONFIG_EFI_MIXED) += efi-mixed.o + +# +# Disable objtool validation for all library code, which is intended +# to be linked into the decompressor or the EFI stub but not vmlinux +# +$(patsubst %.o,$(obj)/%.o,$(lib-y)): OBJECT_FILES_NON_STANDARD := y + +# +# Invoke objtool for each object individually to check for absolute +# relocations, even if other objtool actions are being deferred. +# +$(pi-objs): objtool-enabled = 1 +$(pi-objs): objtool-args = $(if $(delay-objtool),--dry-run,$(objtool-args-y)) --noabs + +# +# Confine the startup code by prefixing all symbols with __pi_ (for position +# independent). This ensures that startup code can only call other startup +# code, or code that has explicitly been made accessible to it via a symbol +# alias. +# +$(obj)/%.pi.o: OBJCOPYFLAGS := --prefix-symbols=__pi_ +$(obj)/%.pi.o: $(obj)/%.o FORCE + $(call if_changed,objcopy) + +targets += $(obj-y) +obj-y := $(patsubst %.o,%.pi.o,$(obj-y)) diff --git a/arch/x86/boot/startup/efi-mixed.S b/arch/x86/boot/startup/efi-mixed.S new file mode 100644 index 000000000..e04ed99bc --- /dev/null +++ b/arch/x86/boot/startup/efi-mixed.S @@ -0,0 +1,253 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming + * + * Early support for invoking 32-bit EFI services from a 64-bit kernel. + * + * Because this thunking occurs before ExitBootServices() we have to + * restore the firmware's 32-bit GDT and IDT before we make EFI service + * calls. + * + * On the plus side, we don't have to worry about mangling 64-bit + * addresses into 32-bits because we're executing with an identity + * mapped pagetable and haven't transitioned to 64-bit virtual addresses + * yet. + */ + +#include <linux/linkage.h> +#include <asm/desc_defs.h> +#include <asm/msr.h> +#include <asm/page_types.h> +#include <asm/pgtable_types.h> +#include <asm/processor-flags.h> +#include <asm/segment.h> + + .text + .code32 +#ifdef CONFIG_EFI_HANDOVER_PROTOCOL +SYM_FUNC_START(efi32_stub_entry) + call 1f +1: popl %ecx + + /* Clear BSS */ + xorl %eax, %eax + leal (_bss - 1b)(%ecx), %edi + leal (_ebss - 1b)(%ecx), %ecx + subl %edi, %ecx + shrl $2, %ecx + cld + rep stosl + + add $0x4, %esp /* Discard return address */ + movl 8(%esp), %ebx /* struct boot_params pointer */ + jmp efi32_startup +SYM_FUNC_END(efi32_stub_entry) +#endif + +/* + * Called using a far call from __efi64_thunk() below, using the x86_64 SysV + * ABI (except for R8/R9 which are inaccessible to 32-bit code - EAX/EBX are + * used instead). EBP+16 points to the arguments passed via the stack. + * + * The first argument (EDI) is a pointer to the boot service or protocol, to + * which the remaining arguments are passed, each truncated to 32 bits. + */ +SYM_FUNC_START_LOCAL(efi_enter32) + /* + * Convert x86-64 SysV ABI params to i386 ABI + */ + pushl 32(%ebp) /* Up to 3 args passed via the stack */ + pushl 24(%ebp) + pushl 16(%ebp) + pushl %ebx /* R9 */ + pushl %eax /* R8 */ + pushl %ecx + pushl %edx + pushl %esi + + /* Disable paging */ + movl %cr0, %eax + btrl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + + /* Disable long mode via EFER */ + movl $MSR_EFER, %ecx + rdmsr + btrl $_EFER_LME, %eax + wrmsr + + call *%edi + + /* We must preserve return value */ + movl %eax, %edi + + call efi32_enable_long_mode + + addl $32, %esp + movl %edi, %eax + lret +SYM_FUNC_END(efi_enter32) + + .code64 +SYM_FUNC_START(__efi64_thunk) + push %rbp + movl %esp, %ebp + push %rbx + + /* Move args #5 and #6 into 32-bit accessible registers */ + movl %r8d, %eax + movl %r9d, %ebx + + lcalll *efi32_call(%rip) + + pop %rbx + pop %rbp + RET +SYM_FUNC_END(__efi64_thunk) + + .code32 +SYM_FUNC_START_LOCAL(efi32_enable_long_mode) + movl %cr4, %eax + btsl $(X86_CR4_PAE_BIT), %eax + movl %eax, %cr4 + + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + wrmsr + + /* Disable interrupts - the firmware's IDT does not work in long mode */ + cli + + /* Enable paging */ + movl %cr0, %eax + btsl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + ret +SYM_FUNC_END(efi32_enable_long_mode) + +/* + * This is the common EFI stub entry point for mixed mode. It sets up the GDT + * and page tables needed for 64-bit execution, after which it calls the + * common 64-bit EFI entrypoint efi_stub_entry(). + * + * Arguments: 0(%esp) image handle + * 4(%esp) EFI system table pointer + * %ebx struct boot_params pointer (or NULL) + * + * Since this is the point of no return for ordinary execution, no registers + * are considered live except for the function parameters. [Note that the EFI + * stub may still exit and return to the firmware using the Exit() EFI boot + * service.] + */ +SYM_FUNC_START_LOCAL(efi32_startup) + movl %esp, %ebp + + subl $8, %esp + sgdtl (%esp) /* Save GDT descriptor to the stack */ + movl 2(%esp), %esi /* Existing GDT pointer */ + movzwl (%esp), %ecx /* Existing GDT limit */ + inc %ecx /* Existing GDT size */ + andl $~7, %ecx /* Ensure size is multiple of 8 */ + + subl %ecx, %esp /* Allocate new GDT */ + andl $~15, %esp /* Realign the stack */ + movl %esp, %edi /* New GDT address */ + leal 7(%ecx), %eax /* New GDT limit */ + pushw %cx /* Push 64-bit CS (for LJMP below) */ + pushl %edi /* Push new GDT address */ + pushw %ax /* Push new GDT limit */ + + /* Copy GDT to the stack and add a 64-bit code segment at the end */ + movl $GDT_ENTRY(DESC_CODE64, 0, 0xfffff) & 0xffffffff, (%edi,%ecx) + movl $GDT_ENTRY(DESC_CODE64, 0, 0xfffff) >> 32, 4(%edi,%ecx) + shrl $2, %ecx + cld + rep movsl /* Copy the firmware GDT */ + lgdtl (%esp) /* Switch to the new GDT */ + + call 1f +1: pop %edi + + /* Record mixed mode entry */ + movb $0x0, (efi_is64 - 1b)(%edi) + + /* Set up indirect far call to re-enter 32-bit mode */ + leal (efi32_call - 1b)(%edi), %eax + addl %eax, (%eax) + movw %cs, 4(%eax) + + /* Disable paging */ + movl %cr0, %eax + btrl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + + /* Set up 1:1 mapping */ + leal (pte - 1b)(%edi), %eax + movl $_PAGE_PRESENT | _PAGE_RW | _PAGE_PSE, %ecx + leal (_PAGE_PRESENT | _PAGE_RW)(%eax), %edx +2: movl %ecx, (%eax) + addl $8, %eax + addl $PMD_SIZE, %ecx + jnc 2b + + movl $PAGE_SIZE, %ecx + .irpc l, 0123 + movl %edx, \l * 8(%eax) + addl %ecx, %edx + .endr + addl %ecx, %eax + movl %edx, (%eax) + movl %eax, %cr3 + + call efi32_enable_long_mode + + /* Set up far jump to 64-bit mode (CS is already on the stack) */ + leal (efi_stub_entry - 1b)(%edi), %eax + movl %eax, 2(%esp) + + movl 0(%ebp), %edi + movl 4(%ebp), %esi + movl %ebx, %edx + ljmpl *2(%esp) +SYM_FUNC_END(efi32_startup) + +/* + * efi_status_t efi32_pe_entry(efi_handle_t image_handle, + * efi_system_table_32_t *sys_table) + */ +SYM_FUNC_START(efi32_pe_entry) + pushl %ebx // save callee-save registers + + /* Check whether the CPU supports long mode */ + movl $0x80000001, %eax // assume extended info support + cpuid + btl $29, %edx // check long mode bit + jnc 1f + leal 8(%esp), %esp // preserve stack alignment + xor %ebx, %ebx // no struct boot_params pointer + jmp efi32_startup // only ESP and EBX remain live +1: movl $0x80000003, %eax // EFI_UNSUPPORTED + popl %ebx + RET +SYM_FUNC_END(efi32_pe_entry) + +#ifdef CONFIG_EFI_HANDOVER_PROTOCOL + .org efi32_stub_entry + 0x200 + .code64 +SYM_FUNC_START_NOALIGN(efi64_stub_entry) + jmp efi_handover_entry +SYM_FUNC_END(efi64_stub_entry) +#endif + + .data + .balign 8 +SYM_DATA_START_LOCAL(efi32_call) + .long efi_enter32 - . + .word 0x0 +SYM_DATA_END(efi32_call) +SYM_DATA(efi_is64, .byte 1) + + .bss + .balign PAGE_SIZE +SYM_DATA_LOCAL(pte, .fill 6 * PAGE_SIZE, 1, 0) diff --git a/arch/x86/boot/startup/exports.h b/arch/x86/boot/startup/exports.h new file mode 100644 index 000000000..01d2363dc --- /dev/null +++ b/arch/x86/boot/startup/exports.h @@ -0,0 +1,14 @@ + +/* + * The symbols below are functions that are implemented by the startup code, + * but called at runtime by the SEV code residing in the core kernel. + */ +PROVIDE(early_set_pages_state = __pi_early_set_pages_state); +PROVIDE(early_snp_set_memory_private = __pi_early_snp_set_memory_private); +PROVIDE(early_snp_set_memory_shared = __pi_early_snp_set_memory_shared); +PROVIDE(get_hv_features = __pi_get_hv_features); +PROVIDE(sev_es_terminate = __pi_sev_es_terminate); +PROVIDE(snp_cpuid = __pi_snp_cpuid); +PROVIDE(snp_cpuid_get_table = __pi_snp_cpuid_get_table); +PROVIDE(svsm_issue_call = __pi_svsm_issue_call); +PROVIDE(svsm_process_result_codes = __pi_svsm_process_result_codes); diff --git a/arch/x86/boot/startup/gdt_idt.c b/arch/x86/boot/startup/gdt_idt.c new file mode 100644 index 000000000..d16102abd --- /dev/null +++ b/arch/x86/boot/startup/gdt_idt.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/linkage.h> +#include <linux/types.h> + +#include <asm/desc.h> +#include <asm/init.h> +#include <asm/setup.h> +#include <asm/sev.h> +#include <asm/trapnr.h> + +/* + * Data structures and code used for IDT setup in head_64.S. The bringup-IDT is + * used until the idt_table takes over. On the boot CPU this happens in + * x86_64_start_kernel(), on secondary CPUs in start_secondary(). In both cases + * this happens in the functions called from head_64.S. + * + * The idt_table can't be used that early because all the code modifying it is + * in idt.c and can be instrumented by tracing or KASAN, which both don't work + * during early CPU bringup. Also the idt_table has the runtime vectors + * configured which require certain CPU state to be setup already (like TSS), + * which also hasn't happened yet in early CPU bringup. + */ +static gate_desc bringup_idt_table[NUM_EXCEPTION_VECTORS] __page_aligned_data; + +/* This may run while still in the direct mapping */ +void startup_64_load_idt(void *vc_handler) +{ + struct desc_ptr desc = { + .address = (unsigned long)rip_rel_ptr(bringup_idt_table), + .size = sizeof(bringup_idt_table) - 1, + }; + struct idt_data data; + gate_desc idt_desc; + + /* @vc_handler is set only for a VMM Communication Exception */ + if (vc_handler) { + init_idt_data(&data, X86_TRAP_VC, vc_handler); + idt_init_desc(&idt_desc, &data); + native_write_idt_entry((gate_desc *)desc.address, X86_TRAP_VC, &idt_desc); + } + + native_load_idt(&desc); +} + +/* + * Setup boot CPU state needed before kernel switches to virtual addresses. + */ +void __init startup_64_setup_gdt_idt(void) +{ + struct gdt_page *gp = rip_rel_ptr((void *)(__force unsigned long)&gdt_page); + void *handler = NULL; + + struct desc_ptr startup_gdt_descr = { + .address = (unsigned long)gp->gdt, + .size = GDT_SIZE - 1, + }; + + /* Load GDT */ + native_load_gdt(&startup_gdt_descr); + + /* New GDT is live - reload data segment registers */ + asm volatile("movl %%eax, %%ds\n" + "movl %%eax, %%ss\n" + "movl %%eax, %%es\n" : : "a"(__KERNEL_DS) : "memory"); + + if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT)) + handler = rip_rel_ptr(vc_no_ghcb); + + startup_64_load_idt(handler); +} diff --git a/arch/x86/boot/startup/la57toggle.S b/arch/x86/boot/startup/la57toggle.S new file mode 100644 index 000000000..370075b4d --- /dev/null +++ b/arch/x86/boot/startup/la57toggle.S @@ -0,0 +1,111 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/boot.h> +#include <asm/msr.h> +#include <asm/processor-flags.h> + +/* + * This is the 32-bit trampoline that will be copied over to low memory. It + * will be called using the ordinary 64-bit calling convention from code + * running in 64-bit mode. + * + * Return address is at the top of the stack (might be above 4G). + * The first argument (EDI) contains the address of the temporary PGD level + * page table in 32-bit addressable memory which will be programmed into + * register CR3. + */ + + .section ".rodata", "a", @progbits +SYM_CODE_START(trampoline_32bit_src) + /* + * Preserve callee save 64-bit registers on the stack: this is + * necessary because the architecture does not guarantee that GPRs will + * retain their full 64-bit values across a 32-bit mode switch. + */ + pushq %r15 + pushq %r14 + pushq %r13 + pushq %r12 + pushq %rbp + pushq %rbx + + /* Preserve top half of RSP in a legacy mode GPR to avoid truncation */ + movq %rsp, %rbx + shrq $32, %rbx + + /* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */ + pushq $__KERNEL32_CS + leaq 0f(%rip), %rax + pushq %rax + lretq + + /* + * The 32-bit code below will do a far jump back to long mode and end + * up here after reconfiguring the number of paging levels. First, the + * stack pointer needs to be restored to its full 64-bit value before + * the callee save register contents can be popped from the stack. + */ +.Lret: + shlq $32, %rbx + orq %rbx, %rsp + + /* Restore the preserved 64-bit registers */ + popq %rbx + popq %rbp + popq %r12 + popq %r13 + popq %r14 + popq %r15 + retq + + .code32 +0: + /* Disable paging */ + movl %cr0, %eax + btrl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + + /* Point CR3 to the trampoline's new top level page table */ + movl %edi, %cr3 + + /* Set EFER.LME=1 as a precaution in case hypervsior pulls the rug */ + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + /* Avoid writing EFER if no change was made (for TDX guest) */ + jc 1f + wrmsr +1: + /* Toggle CR4.LA57 */ + movl %cr4, %eax + btcl $X86_CR4_LA57_BIT, %eax + movl %eax, %cr4 + + /* Enable paging again. */ + movl %cr0, %eax + btsl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + + /* + * Return to the 64-bit calling code using LJMP rather than LRET, to + * avoid the need for a 32-bit addressable stack. The destination + * address will be adjusted after the template code is copied into a + * 32-bit addressable buffer. + */ +.Ljmp: ljmpl $__KERNEL_CS, $(.Lret - trampoline_32bit_src) +SYM_CODE_END(trampoline_32bit_src) + +/* + * This symbol is placed right after trampoline_32bit_src() so its address can + * be used to infer the size of the trampoline code. + */ +SYM_DATA(trampoline_ljmp_imm_offset, .word .Ljmp + 1 - trampoline_32bit_src) + + /* + * The trampoline code has a size limit. + * Make sure we fail to compile if the trampoline code grows + * beyond TRAMPOLINE_32BIT_CODE_SIZE bytes. + */ + .org trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_SIZE diff --git a/arch/x86/boot/startup/map_kernel.c b/arch/x86/boot/startup/map_kernel.c new file mode 100644 index 000000000..83ba98d61 --- /dev/null +++ b/arch/x86/boot/startup/map_kernel.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/pgtable.h> + +#include <asm/init.h> +#include <asm/sections.h> +#include <asm/setup.h> +#include <asm/sev.h> + +extern pmd_t early_dynamic_pgts[EARLY_DYNAMIC_PAGE_TABLES][PTRS_PER_PMD]; +extern unsigned int next_early_pgt; + +static inline bool check_la57_support(void) +{ + /* + * 5-level paging is detected and enabled at kernel decompression + * stage. Only check if it has been enabled there. + */ + if (!(native_read_cr4() & X86_CR4_LA57)) + return false; + + __pgtable_l5_enabled = 1; + pgdir_shift = 48; + ptrs_per_p4d = 512; + + return true; +} + +static unsigned long __init sme_postprocess_startup(struct boot_params *bp, + pmdval_t *pmd, + unsigned long p2v_offset) +{ + unsigned long paddr, paddr_end; + int i; + + /* Encrypt the kernel and related (if SME is active) */ + sme_encrypt_kernel(bp); + + /* + * Clear the memory encryption mask from the .bss..decrypted section. + * The bss section will be memset to zero later in the initialization so + * there is no need to zero it after changing the memory encryption + * attribute. + */ + if (sme_get_me_mask()) { + paddr = (unsigned long)rip_rel_ptr(__start_bss_decrypted); + paddr_end = (unsigned long)rip_rel_ptr(__end_bss_decrypted); + + for (; paddr < paddr_end; paddr += PMD_SIZE) { + /* + * On SNP, transition the page to shared in the RMP table so that + * it is consistent with the page table attribute change. + * + * __start_bss_decrypted has a virtual address in the high range + * mapping (kernel .text). PVALIDATE, by way of + * early_snp_set_memory_shared(), requires a valid virtual + * address but the kernel is currently running off of the identity + * mapping so use the PA to get a *currently* valid virtual address. + */ + early_snp_set_memory_shared(paddr, paddr, PTRS_PER_PMD); + + i = pmd_index(paddr - p2v_offset); + pmd[i] -= sme_get_me_mask(); + } + } + + /* + * Return the SME encryption mask (if SME is active) to be used as a + * modifier for the initial pgdir entry programmed into CR3. + */ + return sme_get_me_mask(); +} + +/* + * This code is compiled using PIC codegen because it will execute from the + * early 1:1 mapping of memory, which deviates from the mapping expected by the + * linker. Due to this deviation, taking the address of a global variable will + * produce an ambiguous result when using the plain & operator. Instead, + * rip_rel_ptr() must be used, which will return the RIP-relative address in + * the 1:1 mapping of memory. Kernel virtual addresses can be determined by + * subtracting p2v_offset from the RIP-relative address. + */ +unsigned long __init __startup_64(unsigned long p2v_offset, + struct boot_params *bp) +{ + pmd_t (*early_pgts)[PTRS_PER_PMD] = rip_rel_ptr(early_dynamic_pgts); + unsigned long physaddr = (unsigned long)rip_rel_ptr(_text); + unsigned long va_text, va_end; + unsigned long pgtable_flags; + unsigned long load_delta; + pgdval_t *pgd; + p4dval_t *p4d; + pudval_t *pud; + pmdval_t *pmd, pmd_entry; + bool la57; + int i; + + la57 = check_la57_support(); + + /* Is the address too large? */ + if (physaddr >> MAX_PHYSMEM_BITS) + for (;;); + + /* + * Compute the delta between the address I am compiled to run at + * and the address I am actually running at. + */ + phys_base = load_delta = __START_KERNEL_map + p2v_offset; + + /* Is the address not 2M aligned? */ + if (load_delta & ~PMD_MASK) + for (;;); + + va_text = physaddr - p2v_offset; + va_end = (unsigned long)rip_rel_ptr(_end) - p2v_offset; + + /* Include the SME encryption mask in the fixup value */ + load_delta += sme_get_me_mask(); + + /* Fixup the physical addresses in the page table */ + + pgd = rip_rel_ptr(early_top_pgt); + pgd[pgd_index(__START_KERNEL_map)] += load_delta; + + if (la57) { + p4d = (p4dval_t *)rip_rel_ptr(level4_kernel_pgt); + p4d[MAX_PTRS_PER_P4D - 1] += load_delta; + + pgd[pgd_index(__START_KERNEL_map)] = (pgdval_t)p4d | _PAGE_TABLE; + } + + level3_kernel_pgt[PTRS_PER_PUD - 2].pud += load_delta; + level3_kernel_pgt[PTRS_PER_PUD - 1].pud += load_delta; + + for (i = FIXMAP_PMD_TOP; i > FIXMAP_PMD_TOP - FIXMAP_PMD_NUM; i--) + level2_fixmap_pgt[i].pmd += load_delta; + + /* + * Set up the identity mapping for the switchover. These + * entries should *NOT* have the global bit set! This also + * creates a bunch of nonsense entries but that is fine -- + * it avoids problems around wraparound. + */ + + pud = &early_pgts[0]->pmd; + pmd = &early_pgts[1]->pmd; + next_early_pgt = 2; + + pgtable_flags = _KERNPG_TABLE_NOENC + sme_get_me_mask(); + + if (la57) { + p4d = &early_pgts[next_early_pgt++]->pmd; + + i = (physaddr >> PGDIR_SHIFT) % PTRS_PER_PGD; + pgd[i + 0] = (pgdval_t)p4d + pgtable_flags; + pgd[i + 1] = (pgdval_t)p4d + pgtable_flags; + + i = physaddr >> P4D_SHIFT; + p4d[(i + 0) % PTRS_PER_P4D] = (pgdval_t)pud + pgtable_flags; + p4d[(i + 1) % PTRS_PER_P4D] = (pgdval_t)pud + pgtable_flags; + } else { + i = (physaddr >> PGDIR_SHIFT) % PTRS_PER_PGD; + pgd[i + 0] = (pgdval_t)pud + pgtable_flags; + pgd[i + 1] = (pgdval_t)pud + pgtable_flags; + } + + i = physaddr >> PUD_SHIFT; + pud[(i + 0) % PTRS_PER_PUD] = (pudval_t)pmd + pgtable_flags; + pud[(i + 1) % PTRS_PER_PUD] = (pudval_t)pmd + pgtable_flags; + + pmd_entry = __PAGE_KERNEL_LARGE_EXEC & ~_PAGE_GLOBAL; + pmd_entry += sme_get_me_mask(); + pmd_entry += physaddr; + + for (i = 0; i < DIV_ROUND_UP(va_end - va_text, PMD_SIZE); i++) { + int idx = i + (physaddr >> PMD_SHIFT); + + pmd[idx % PTRS_PER_PMD] = pmd_entry + i * PMD_SIZE; + } + + /* + * Fixup the kernel text+data virtual addresses. Note that + * we might write invalid pmds, when the kernel is relocated + * cleanup_highmap() fixes this up along with the mappings + * beyond _end. + * + * Only the region occupied by the kernel image has so far + * been checked against the table of usable memory regions + * provided by the firmware, so invalidate pages outside that + * region. A page table entry that maps to a reserved area of + * memory would allow processor speculation into that area, + * and on some hardware (particularly the UV platform) even + * speculative access to some reserved areas is caught as an + * error, causing the BIOS to halt the system. + */ + + pmd = rip_rel_ptr(level2_kernel_pgt); + + /* invalidate pages before the kernel image */ + for (i = 0; i < pmd_index(va_text); i++) + pmd[i] &= ~_PAGE_PRESENT; + + /* fixup pages that are part of the kernel image */ + for (; i <= pmd_index(va_end); i++) + if (pmd[i] & _PAGE_PRESENT) + pmd[i] += load_delta; + + /* invalidate pages after the kernel image */ + for (; i < PTRS_PER_PMD; i++) + pmd[i] &= ~_PAGE_PRESENT; + + return sme_postprocess_startup(bp, pmd, p2v_offset); +} diff --git a/arch/x86/boot/startup/sev-shared.c b/arch/x86/boot/startup/sev-shared.c new file mode 100644 index 000000000..d9ac3a929 --- /dev/null +++ b/arch/x86/boot/startup/sev-shared.c @@ -0,0 +1,762 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AMD Encrypted Register State Support + * + * Author: Joerg Roedel <jroedel@suse.de> + * + * This file is not compiled stand-alone. It contains code shared + * between the pre-decompression boot code and the running Linux kernel + * and is included directly into both code-bases. + */ + +#include <asm/setup_data.h> + +#ifndef __BOOT_COMPRESSED +#define has_cpuflag(f) cpu_feature_enabled(f) +#else +#undef WARN +#define WARN(condition, format...) (!!(condition)) +#endif + +/* Copy of the SNP firmware's CPUID page. */ +static struct snp_cpuid_table cpuid_table_copy __ro_after_init; + +/* + * These will be initialized based on CPUID table so that non-present + * all-zero leaves (for sparse tables) can be differentiated from + * invalid/out-of-range leaves. This is needed since all-zero leaves + * still need to be post-processed. + */ +static u32 cpuid_std_range_max __ro_after_init; +static u32 cpuid_hyp_range_max __ro_after_init; +static u32 cpuid_ext_range_max __ro_after_init; + +bool sev_snp_needs_sfw __section(".data"); + +void __noreturn +sev_es_terminate(unsigned int set, unsigned int reason) +{ + u64 val = GHCB_MSR_TERM_REQ; + + /* Tell the hypervisor what went wrong. */ + val |= GHCB_SEV_TERM_REASON(set, reason); + + /* Request Guest Termination from Hypervisor */ + sev_es_wr_ghcb_msr(val); + VMGEXIT(); + + while (true) + asm volatile("hlt\n" : : : "memory"); +} + +/* + * The hypervisor features are available from GHCB version 2 onward. + */ +u64 __init get_hv_features(void) +{ + u64 val; + + if (ghcb_version < 2) + return 0; + + sev_es_wr_ghcb_msr(GHCB_MSR_HV_FT_REQ); + VMGEXIT(); + + val = sev_es_rd_ghcb_msr(); + if (GHCB_RESP_CODE(val) != GHCB_MSR_HV_FT_RESP) + return 0; + + return GHCB_MSR_HV_FT_RESP_VAL(val); +} + +int svsm_process_result_codes(struct svsm_call *call) +{ + switch (call->rax_out) { + case SVSM_SUCCESS: + return 0; + case SVSM_ERR_INCOMPLETE: + case SVSM_ERR_BUSY: + return -EAGAIN; + default: + return -EINVAL; + } +} + +/* + * Issue a VMGEXIT to call the SVSM: + * - Load the SVSM register state (RAX, RCX, RDX, R8 and R9) + * - Set the CA call pending field to 1 + * - Issue VMGEXIT + * - Save the SVSM return register state (RAX, RCX, RDX, R8 and R9) + * - Perform atomic exchange of the CA call pending field + * + * - See the "Secure VM Service Module for SEV-SNP Guests" specification for + * details on the calling convention. + * - The calling convention loosely follows the Microsoft X64 calling + * convention by putting arguments in RCX, RDX, R8 and R9. + * - RAX specifies the SVSM protocol/callid as input and the return code + * as output. + */ +void svsm_issue_call(struct svsm_call *call, u8 *pending) +{ + register unsigned long rax asm("rax") = call->rax; + register unsigned long rcx asm("rcx") = call->rcx; + register unsigned long rdx asm("rdx") = call->rdx; + register unsigned long r8 asm("r8") = call->r8; + register unsigned long r9 asm("r9") = call->r9; + + call->caa->call_pending = 1; + + asm volatile("rep; vmmcall\n\t" + : "+r" (rax), "+r" (rcx), "+r" (rdx), "+r" (r8), "+r" (r9) + : : "memory"); + + *pending = xchg(&call->caa->call_pending, *pending); + + call->rax_out = rax; + call->rcx_out = rcx; + call->rdx_out = rdx; + call->r8_out = r8; + call->r9_out = r9; +} + +int svsm_perform_msr_protocol(struct svsm_call *call) +{ + u8 pending = 0; + u64 val, resp; + + /* + * When using the MSR protocol, be sure to save and restore + * the current MSR value. + */ + val = sev_es_rd_ghcb_msr(); + + sev_es_wr_ghcb_msr(GHCB_MSR_VMPL_REQ_LEVEL(0)); + + svsm_issue_call(call, &pending); + + resp = sev_es_rd_ghcb_msr(); + + sev_es_wr_ghcb_msr(val); + + if (pending) + return -EINVAL; + + if (GHCB_RESP_CODE(resp) != GHCB_MSR_VMPL_RESP) + return -EINVAL; + + if (GHCB_MSR_VMPL_RESP_VAL(resp)) + return -EINVAL; + + return svsm_process_result_codes(call); +} + +static int __sev_cpuid_hv(u32 fn, int reg_idx, u32 *reg) +{ + u64 val; + + sev_es_wr_ghcb_msr(GHCB_CPUID_REQ(fn, reg_idx)); + VMGEXIT(); + val = sev_es_rd_ghcb_msr(); + if (GHCB_RESP_CODE(val) != GHCB_MSR_CPUID_RESP) + return -EIO; + + *reg = (val >> 32); + + return 0; +} + +static int __sev_cpuid_hv_msr(struct cpuid_leaf *leaf) +{ + int ret; + + /* + * MSR protocol does not support fetching non-zero subfunctions, but is + * sufficient to handle current early-boot cases. Should that change, + * make sure to report an error rather than ignoring the index and + * grabbing random values. If this issue arises in the future, handling + * can be added here to use GHCB-page protocol for cases that occur late + * enough in boot that GHCB page is available. + */ + if (cpuid_function_is_indexed(leaf->fn) && leaf->subfn) + return -EINVAL; + + ret = __sev_cpuid_hv(leaf->fn, GHCB_CPUID_REQ_EAX, &leaf->eax); + ret = ret ? : __sev_cpuid_hv(leaf->fn, GHCB_CPUID_REQ_EBX, &leaf->ebx); + ret = ret ? : __sev_cpuid_hv(leaf->fn, GHCB_CPUID_REQ_ECX, &leaf->ecx); + ret = ret ? : __sev_cpuid_hv(leaf->fn, GHCB_CPUID_REQ_EDX, &leaf->edx); + + return ret; +} + + + +/* + * This may be called early while still running on the initial identity + * mapping. Use RIP-relative addressing to obtain the correct address + * while running with the initial identity mapping as well as the + * switch-over to kernel virtual addresses later. + */ +const struct snp_cpuid_table *snp_cpuid_get_table(void) +{ + return rip_rel_ptr(&cpuid_table_copy); +} + +/* + * The SNP Firmware ABI, Revision 0.9, Section 7.1, details the use of + * XCR0_IN and XSS_IN to encode multiple versions of 0xD subfunctions 0 + * and 1 based on the corresponding features enabled by a particular + * combination of XCR0 and XSS registers so that a guest can look up the + * version corresponding to the features currently enabled in its XCR0/XSS + * registers. The only values that differ between these versions/table + * entries is the enabled XSAVE area size advertised via EBX. + * + * While hypervisors may choose to make use of this support, it is more + * robust/secure for a guest to simply find the entry corresponding to the + * base/legacy XSAVE area size (XCR0=1 or XCR0=3), and then calculate the + * XSAVE area size using subfunctions 2 through 64, as documented in APM + * Volume 3, Rev 3.31, Appendix E.3.8, which is what is done here. + * + * Since base/legacy XSAVE area size is documented as 0x240, use that value + * directly rather than relying on the base size in the CPUID table. + * + * Return: XSAVE area size on success, 0 otherwise. + */ +static u32 snp_cpuid_calc_xsave_size(u64 xfeatures_en, bool compacted) +{ + const struct snp_cpuid_table *cpuid_table = snp_cpuid_get_table(); + u64 xfeatures_found = 0; + u32 xsave_size = 0x240; + int i; + + for (i = 0; i < cpuid_table->count; i++) { + const struct snp_cpuid_fn *e = &cpuid_table->fn[i]; + + if (!(e->eax_in == 0xD && e->ecx_in > 1 && e->ecx_in < 64)) + continue; + if (!(xfeatures_en & (BIT_ULL(e->ecx_in)))) + continue; + if (xfeatures_found & (BIT_ULL(e->ecx_in))) + continue; + + xfeatures_found |= (BIT_ULL(e->ecx_in)); + + if (compacted) + xsave_size += e->eax; + else + xsave_size = max(xsave_size, e->eax + e->ebx); + } + + /* + * Either the guest set unsupported XCR0/XSS bits, or the corresponding + * entries in the CPUID table were not present. This is not a valid + * state to be in. + */ + if (xfeatures_found != (xfeatures_en & GENMASK_ULL(63, 2))) + return 0; + + return xsave_size; +} + +static bool +snp_cpuid_get_validated_func(struct cpuid_leaf *leaf) +{ + const struct snp_cpuid_table *cpuid_table = snp_cpuid_get_table(); + int i; + + for (i = 0; i < cpuid_table->count; i++) { + const struct snp_cpuid_fn *e = &cpuid_table->fn[i]; + + if (e->eax_in != leaf->fn) + continue; + + if (cpuid_function_is_indexed(leaf->fn) && e->ecx_in != leaf->subfn) + continue; + + /* + * For 0xD subfunctions 0 and 1, only use the entry corresponding + * to the base/legacy XSAVE area size (XCR0=1 or XCR0=3, XSS=0). + * See the comments above snp_cpuid_calc_xsave_size() for more + * details. + */ + if (e->eax_in == 0xD && (e->ecx_in == 0 || e->ecx_in == 1)) + if (!(e->xcr0_in == 1 || e->xcr0_in == 3) || e->xss_in) + continue; + + leaf->eax = e->eax; + leaf->ebx = e->ebx; + leaf->ecx = e->ecx; + leaf->edx = e->edx; + + return true; + } + + return false; +} + +static void snp_cpuid_hv_msr(void *ctx, struct cpuid_leaf *leaf) +{ + if (__sev_cpuid_hv_msr(leaf)) + sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_CPUID_HV); +} + +static int +snp_cpuid_postprocess(void (*cpuid_fn)(void *ctx, struct cpuid_leaf *leaf), + void *ctx, struct cpuid_leaf *leaf) +{ + struct cpuid_leaf leaf_hv = *leaf; + + switch (leaf->fn) { + case 0x1: + cpuid_fn(ctx, &leaf_hv); + + /* initial APIC ID */ + leaf->ebx = (leaf_hv.ebx & GENMASK(31, 24)) | (leaf->ebx & GENMASK(23, 0)); + /* APIC enabled bit */ + leaf->edx = (leaf_hv.edx & BIT(9)) | (leaf->edx & ~BIT(9)); + + /* OSXSAVE enabled bit */ + if (native_read_cr4() & X86_CR4_OSXSAVE) + leaf->ecx |= BIT(27); + break; + case 0x7: + /* OSPKE enabled bit */ + leaf->ecx &= ~BIT(4); + if (native_read_cr4() & X86_CR4_PKE) + leaf->ecx |= BIT(4); + break; + case 0xB: + leaf_hv.subfn = 0; + cpuid_fn(ctx, &leaf_hv); + + /* extended APIC ID */ + leaf->edx = leaf_hv.edx; + break; + case 0xD: { + bool compacted = false; + u64 xcr0 = 1, xss = 0; + u32 xsave_size; + + if (leaf->subfn != 0 && leaf->subfn != 1) + return 0; + + if (native_read_cr4() & X86_CR4_OSXSAVE) + xcr0 = xgetbv(XCR_XFEATURE_ENABLED_MASK); + if (leaf->subfn == 1) { + /* Get XSS value if XSAVES is enabled. */ + if (leaf->eax & BIT(3)) { + unsigned long lo, hi; + + asm volatile("rdmsr" : "=a" (lo), "=d" (hi) + : "c" (MSR_IA32_XSS)); + xss = (hi << 32) | lo; + } + + /* + * The PPR and APM aren't clear on what size should be + * encoded in 0xD:0x1:EBX when compaction is not enabled + * by either XSAVEC (feature bit 1) or XSAVES (feature + * bit 3) since SNP-capable hardware has these feature + * bits fixed as 1. KVM sets it to 0 in this case, but + * to avoid this becoming an issue it's safer to simply + * treat this as unsupported for SNP guests. + */ + if (!(leaf->eax & (BIT(1) | BIT(3)))) + return -EINVAL; + + compacted = true; + } + + xsave_size = snp_cpuid_calc_xsave_size(xcr0 | xss, compacted); + if (!xsave_size) + return -EINVAL; + + leaf->ebx = xsave_size; + } + break; + case 0x8000001E: + cpuid_fn(ctx, &leaf_hv); + + /* extended APIC ID */ + leaf->eax = leaf_hv.eax; + /* compute ID */ + leaf->ebx = (leaf->ebx & GENMASK(31, 8)) | (leaf_hv.ebx & GENMASK(7, 0)); + /* node ID */ + leaf->ecx = (leaf->ecx & GENMASK(31, 8)) | (leaf_hv.ecx & GENMASK(7, 0)); + break; + default: + /* No fix-ups needed, use values as-is. */ + break; + } + + return 0; +} + +/* + * Returns -EOPNOTSUPP if feature not enabled. Any other non-zero return value + * should be treated as fatal by caller. + */ +int snp_cpuid(void (*cpuid_fn)(void *ctx, struct cpuid_leaf *leaf), + void *ctx, struct cpuid_leaf *leaf) +{ + const struct snp_cpuid_table *cpuid_table = snp_cpuid_get_table(); + + if (!cpuid_table->count) + return -EOPNOTSUPP; + + if (!snp_cpuid_get_validated_func(leaf)) { + /* + * Some hypervisors will avoid keeping track of CPUID entries + * where all values are zero, since they can be handled the + * same as out-of-range values (all-zero). This is useful here + * as well as it allows virtually all guest configurations to + * work using a single SNP CPUID table. + * + * To allow for this, there is a need to distinguish between + * out-of-range entries and in-range zero entries, since the + * CPUID table entries are only a template that may need to be + * augmented with additional values for things like + * CPU-specific information during post-processing. So if it's + * not in the table, set the values to zero. Then, if they are + * within a valid CPUID range, proceed with post-processing + * using zeros as the initial values. Otherwise, skip + * post-processing and just return zeros immediately. + */ + leaf->eax = leaf->ebx = leaf->ecx = leaf->edx = 0; + + /* Skip post-processing for out-of-range zero leafs. */ + if (!(leaf->fn <= cpuid_std_range_max || + (leaf->fn >= 0x40000000 && leaf->fn <= cpuid_hyp_range_max) || + (leaf->fn >= 0x80000000 && leaf->fn <= cpuid_ext_range_max))) + return 0; + } + + return snp_cpuid_postprocess(cpuid_fn, ctx, leaf); +} + +/* + * Boot VC Handler - This is the first VC handler during boot, there is no GHCB + * page yet, so it only supports the MSR based communication with the + * hypervisor and only the CPUID exit-code. + */ +void do_vc_no_ghcb(struct pt_regs *regs, unsigned long exit_code) +{ + unsigned int subfn = lower_bits(regs->cx, 32); + unsigned int fn = lower_bits(regs->ax, 32); + u16 opcode = *(unsigned short *)regs->ip; + struct cpuid_leaf leaf; + int ret; + + /* Only CPUID is supported via MSR protocol */ + if (exit_code != SVM_EXIT_CPUID) + goto fail; + + /* Is it really a CPUID insn? */ + if (opcode != 0xa20f) + goto fail; + + leaf.fn = fn; + leaf.subfn = subfn; + + /* + * If SNP is active, then snp_cpuid() uses the CPUID table to obtain the + * CPUID values (with possible HV interaction during post-processing of + * the values). But if SNP is not active (no CPUID table present), then + * snp_cpuid() returns -EOPNOTSUPP so that an SEV-ES guest can call the + * HV to obtain the CPUID information. + */ + ret = snp_cpuid(snp_cpuid_hv_msr, NULL, &leaf); + if (!ret) + goto cpuid_done; + + if (ret != -EOPNOTSUPP) + goto fail; + + /* + * This is reached by a SEV-ES guest and needs to invoke the HV for + * the CPUID data. + */ + if (__sev_cpuid_hv_msr(&leaf)) + goto fail; + +cpuid_done: + regs->ax = leaf.eax; + regs->bx = leaf.ebx; + regs->cx = leaf.ecx; + regs->dx = leaf.edx; + + /* + * This is a VC handler and the #VC is only raised when SEV-ES is + * active, which means SEV must be active too. Do sanity checks on the + * CPUID results to make sure the hypervisor does not trick the kernel + * into the no-sev path. This could map sensitive data unencrypted and + * make it accessible to the hypervisor. + * + * In particular, check for: + * - Availability of CPUID leaf 0x8000001f + * - SEV CPUID bit. + * + * The hypervisor might still report the wrong C-bit position, but this + * can't be checked here. + */ + + if (fn == 0x80000000 && (regs->ax < 0x8000001f)) + /* SEV leaf check */ + goto fail; + else if ((fn == 0x8000001f && !(regs->ax & BIT(1)))) + /* SEV bit */ + goto fail; + + /* Skip over the CPUID two-byte opcode */ + regs->ip += 2; + + return; + +fail: + /* Terminate the guest */ + sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_GEN_REQ); +} + +struct cc_setup_data { + struct setup_data header; + u32 cc_blob_address; +}; + +/* + * Search for a Confidential Computing blob passed in as a setup_data entry + * via the Linux Boot Protocol. + */ +static __init +struct cc_blob_sev_info *find_cc_blob_setup_data(struct boot_params *bp) +{ + struct cc_setup_data *sd = NULL; + struct setup_data *hdr; + + hdr = (struct setup_data *)bp->hdr.setup_data; + + while (hdr) { + if (hdr->type == SETUP_CC_BLOB) { + sd = (struct cc_setup_data *)hdr; + return (struct cc_blob_sev_info *)(unsigned long)sd->cc_blob_address; + } + hdr = (struct setup_data *)hdr->next; + } + + return NULL; +} + +/* + * Initialize the kernel's copy of the SNP CPUID table, and set up the + * pointer that will be used to access it. + * + * Maintaining a direct mapping of the SNP CPUID table used by firmware would + * be possible as an alternative, but the approach is brittle since the + * mapping needs to be updated in sync with all the changes to virtual memory + * layout and related mapping facilities throughout the boot process. + */ +static void __init setup_cpuid_table(const struct cc_blob_sev_info *cc_info) +{ + const struct snp_cpuid_table *cpuid_table_fw, *cpuid_table; + int i; + + if (!cc_info || !cc_info->cpuid_phys || cc_info->cpuid_len < PAGE_SIZE) + sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_CPUID); + + cpuid_table_fw = (const struct snp_cpuid_table *)cc_info->cpuid_phys; + if (!cpuid_table_fw->count || cpuid_table_fw->count > SNP_CPUID_COUNT_MAX) + sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_CPUID); + + cpuid_table = snp_cpuid_get_table(); + memcpy((void *)cpuid_table, cpuid_table_fw, sizeof(*cpuid_table)); + + /* Initialize CPUID ranges for range-checking. */ + for (i = 0; i < cpuid_table->count; i++) { + const struct snp_cpuid_fn *fn = &cpuid_table->fn[i]; + + if (fn->eax_in == 0x0) + cpuid_std_range_max = fn->eax; + else if (fn->eax_in == 0x40000000) + cpuid_hyp_range_max = fn->eax; + else if (fn->eax_in == 0x80000000) + cpuid_ext_range_max = fn->eax; + } +} + +static int svsm_call_msr_protocol(struct svsm_call *call) +{ + int ret; + + do { + ret = svsm_perform_msr_protocol(call); + } while (ret == -EAGAIN); + + return ret; +} + +static void svsm_pval_4k_page(unsigned long paddr, bool validate, + struct svsm_ca *caa, u64 caa_pa) +{ + struct svsm_pvalidate_call *pc; + struct svsm_call call = {}; + unsigned long flags; + u64 pc_pa; + + /* + * This can be called very early in the boot, use native functions in + * order to avoid paravirt issues. + */ + flags = native_local_irq_save(); + + call.caa = caa; + + pc = (struct svsm_pvalidate_call *)call.caa->svsm_buffer; + pc_pa = caa_pa + offsetof(struct svsm_ca, svsm_buffer); + + pc->num_entries = 1; + pc->cur_index = 0; + pc->entry[0].page_size = RMP_PG_SIZE_4K; + pc->entry[0].action = validate; + pc->entry[0].ignore_cf = 0; + pc->entry[0].rsvd = 0; + pc->entry[0].pfn = paddr >> PAGE_SHIFT; + + /* Protocol 0, Call ID 1 */ + call.rax = SVSM_CORE_CALL(SVSM_CORE_PVALIDATE); + call.rcx = pc_pa; + + /* + * Use the MSR protocol exclusively, so that this code is usable in + * startup code where VA/PA translations of the GHCB page's address may + * be problematic. + */ + if (svsm_call_msr_protocol(&call)) + sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_PVALIDATE); + + native_local_irq_restore(flags); +} + +static void pvalidate_4k_page(unsigned long vaddr, unsigned long paddr, + bool validate, struct svsm_ca *caa, u64 caa_pa) +{ + int ret; + + if (snp_vmpl) { + svsm_pval_4k_page(paddr, validate, caa, caa_pa); + } else { + ret = pvalidate(vaddr, RMP_PG_SIZE_4K, validate); + if (ret) + sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_PVALIDATE); + } + + /* + * If validating memory (making it private) and affected by the + * cache-coherency vulnerability, perform the cache eviction mitigation. + */ + if (validate && sev_snp_needs_sfw) + sev_evict_cache((void *)vaddr, 1); +} + +static void __page_state_change(unsigned long vaddr, unsigned long paddr, + const struct psc_desc *desc) +{ + u64 val, msr; + + /* + * If private -> shared then invalidate the page before requesting the + * state change in the RMP table. + */ + if (desc->op == SNP_PAGE_STATE_SHARED) + pvalidate_4k_page(vaddr, paddr, false, desc->ca, desc->caa_pa); + + /* Save the current GHCB MSR value */ + msr = sev_es_rd_ghcb_msr(); + + /* Issue VMGEXIT to change the page state in RMP table. */ + sev_es_wr_ghcb_msr(GHCB_MSR_PSC_REQ_GFN(paddr >> PAGE_SHIFT, desc->op)); + VMGEXIT(); + + /* Read the response of the VMGEXIT. */ + val = sev_es_rd_ghcb_msr(); + if ((GHCB_RESP_CODE(val) != GHCB_MSR_PSC_RESP) || GHCB_MSR_PSC_RESP_VAL(val)) + sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_PSC); + + /* Restore the GHCB MSR value */ + sev_es_wr_ghcb_msr(msr); + + /* + * Now that page state is changed in the RMP table, validate it so that it is + * consistent with the RMP entry. + */ + if (desc->op == SNP_PAGE_STATE_PRIVATE) + pvalidate_4k_page(vaddr, paddr, true, desc->ca, desc->caa_pa); +} + +/* + * Maintain the GPA of the SVSM Calling Area (CA) in order to utilize the SVSM + * services needed when not running in VMPL0. + */ +static bool __init svsm_setup_ca(const struct cc_blob_sev_info *cc_info, + void *page) +{ + struct snp_secrets_page *secrets_page; + struct snp_cpuid_table *cpuid_table; + unsigned int i; + u64 caa; + + BUILD_BUG_ON(sizeof(*secrets_page) != PAGE_SIZE); + + /* + * Check if running at VMPL0. + * + * Use RMPADJUST (see the rmpadjust() function for a description of what + * the instruction does) to update the VMPL1 permissions of a page. If + * the guest is running at VMPL0, this will succeed and implies there is + * no SVSM. If the guest is running at any other VMPL, this will fail. + * Linux SNP guests only ever run at a single VMPL level so permission mask + * changes of a lesser-privileged VMPL are a don't-care. + * + * Use a rip-relative reference to obtain the proper address, since this + * routine is running identity mapped when called, both by the decompressor + * code and the early kernel code. + */ + if (!rmpadjust((unsigned long)page, RMP_PG_SIZE_4K, 1)) + return false; + + /* + * Not running at VMPL0, ensure everything has been properly supplied + * for running under an SVSM. + */ + if (!cc_info || !cc_info->secrets_phys || cc_info->secrets_len != PAGE_SIZE) + sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SECRETS_PAGE); + + secrets_page = (struct snp_secrets_page *)cc_info->secrets_phys; + if (!secrets_page->svsm_size) + sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_NO_SVSM); + + if (!secrets_page->svsm_guest_vmpl) + sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SVSM_VMPL0); + + snp_vmpl = secrets_page->svsm_guest_vmpl; + + caa = secrets_page->svsm_caa; + + /* + * An open-coded PAGE_ALIGNED() in order to avoid including + * kernel-proper headers into the decompressor. + */ + if (caa & (PAGE_SIZE - 1)) + sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SVSM_CAA); + + boot_svsm_caa_pa = caa; + + /* Advertise the SVSM presence via CPUID. */ + cpuid_table = (struct snp_cpuid_table *)snp_cpuid_get_table(); + for (i = 0; i < cpuid_table->count; i++) { + struct snp_cpuid_fn *fn = &cpuid_table->fn[i]; + + if (fn->eax_in == 0x8000001f) + fn->eax |= BIT(28); + } + + return true; +} diff --git a/arch/x86/boot/startup/sev-startup.c b/arch/x86/boot/startup/sev-startup.c new file mode 100644 index 000000000..789e99d38 --- /dev/null +++ b/arch/x86/boot/startup/sev-startup.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * AMD Memory Encryption Support + * + * Copyright (C) 2019 SUSE + * + * Author: Joerg Roedel <jroedel@suse.de> + */ + +#define pr_fmt(fmt) "SEV: " fmt + +#include <linux/percpu-defs.h> +#include <linux/cc_platform.h> +#include <linux/printk.h> +#include <linux/mm_types.h> +#include <linux/set_memory.h> +#include <linux/memblock.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/cpumask.h> +#include <linux/efi.h> +#include <linux/io.h> +#include <linux/psp-sev.h> +#include <uapi/linux/sev-guest.h> + +#include <asm/init.h> +#include <asm/cpu_entry_area.h> +#include <asm/stacktrace.h> +#include <asm/sev.h> +#include <asm/insn-eval.h> +#include <asm/fpu/xcr.h> +#include <asm/processor.h> +#include <asm/realmode.h> +#include <asm/setup.h> +#include <asm/traps.h> +#include <asm/svm.h> +#include <asm/smp.h> +#include <asm/cpu.h> +#include <asm/apic.h> +#include <asm/cpuid/api.h> +#include <asm/cmdline.h> + +#include "../../coco/sev/internal.h" + +/* Include code shared with pre-decompression boot stage */ +#include "sev-shared.c" + +void +early_set_pages_state(unsigned long vaddr, unsigned long paddr, + unsigned long npages, const struct psc_desc *desc) +{ + unsigned long paddr_end; + + vaddr = vaddr & PAGE_MASK; + + paddr = paddr & PAGE_MASK; + paddr_end = paddr + (npages << PAGE_SHIFT); + + while (paddr < paddr_end) { + __page_state_change(vaddr, paddr, desc); + + vaddr += PAGE_SIZE; + paddr += PAGE_SIZE; + } +} + +void __init early_snp_set_memory_private(unsigned long vaddr, unsigned long paddr, + unsigned long npages) +{ + struct psc_desc d = { + SNP_PAGE_STATE_PRIVATE, + rip_rel_ptr(&boot_svsm_ca_page), + boot_svsm_caa_pa + }; + + /* + * This can be invoked in early boot while running identity mapped, so + * use an open coded check for SNP instead of using cc_platform_has(). + * This eliminates worries about jump tables or checking boot_cpu_data + * in the cc_platform_has() function. + */ + if (!(sev_status & MSR_AMD64_SEV_SNP_ENABLED)) + return; + + /* + * Ask the hypervisor to mark the memory pages as private in the RMP + * table. + */ + early_set_pages_state(vaddr, paddr, npages, &d); +} + +void __init early_snp_set_memory_shared(unsigned long vaddr, unsigned long paddr, + unsigned long npages) +{ + struct psc_desc d = { + SNP_PAGE_STATE_SHARED, + rip_rel_ptr(&boot_svsm_ca_page), + boot_svsm_caa_pa + }; + + /* + * This can be invoked in early boot while running identity mapped, so + * use an open coded check for SNP instead of using cc_platform_has(). + * This eliminates worries about jump tables or checking boot_cpu_data + * in the cc_platform_has() function. + */ + if (!(sev_status & MSR_AMD64_SEV_SNP_ENABLED)) + return; + + /* Ask hypervisor to mark the memory pages shared in the RMP table. */ + early_set_pages_state(vaddr, paddr, npages, &d); +} + +/* + * Initial set up of SNP relies on information provided by the + * Confidential Computing blob, which can be passed to the kernel + * in the following ways, depending on how it is booted: + * + * - when booted via the boot/decompress kernel: + * - via boot_params + * + * - when booted directly by firmware/bootloader (e.g. CONFIG_PVH): + * - via a setup_data entry, as defined by the Linux Boot Protocol + * + * Scan for the blob in that order. + */ +static struct cc_blob_sev_info *__init find_cc_blob(struct boot_params *bp) +{ + struct cc_blob_sev_info *cc_info; + + /* Boot kernel would have passed the CC blob via boot_params. */ + if (bp->cc_blob_address) { + cc_info = (struct cc_blob_sev_info *)(unsigned long)bp->cc_blob_address; + goto found_cc_info; + } + + /* + * If kernel was booted directly, without the use of the + * boot/decompression kernel, the CC blob may have been passed via + * setup_data instead. + */ + cc_info = find_cc_blob_setup_data(bp); + if (!cc_info) + return NULL; + +found_cc_info: + if (cc_info->magic != CC_BLOB_SEV_HDR_MAGIC) + sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED); + + return cc_info; +} + +static void __init svsm_setup(struct cc_blob_sev_info *cc_info) +{ + struct snp_secrets_page *secrets = (void *)cc_info->secrets_phys; + struct svsm_call call = {}; + u64 pa; + + /* + * Record the SVSM Calling Area address (CAA) if the guest is not + * running at VMPL0. The CA will be used to communicate with the + * SVSM to perform the SVSM services. + */ + if (!svsm_setup_ca(cc_info, rip_rel_ptr(&boot_svsm_ca_page))) + return; + + /* + * It is very early in the boot and the kernel is running identity + * mapped but without having adjusted the pagetables to where the + * kernel was loaded (physbase), so the get the CA address using + * RIP-relative addressing. + */ + pa = (u64)rip_rel_ptr(&boot_svsm_ca_page); + + /* + * Switch over to the boot SVSM CA while the current CA is still 1:1 + * mapped and thus addressable with VA == PA. There is no GHCB at this + * point so use the MSR protocol. + * + * SVSM_CORE_REMAP_CA call: + * RAX = 0 (Protocol=0, CallID=0) + * RCX = New CA GPA + */ + call.caa = (struct svsm_ca *)secrets->svsm_caa; + call.rax = SVSM_CORE_CALL(SVSM_CORE_REMAP_CA); + call.rcx = pa; + + if (svsm_call_msr_protocol(&call)) + sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SVSM_CA_REMAP_FAIL); + + boot_svsm_caa_pa = pa; +} + +bool __init snp_init(struct boot_params *bp) +{ + struct cc_blob_sev_info *cc_info; + + if (!bp) + return false; + + cc_info = find_cc_blob(bp); + if (!cc_info) + return false; + + if (cc_info->secrets_phys && cc_info->secrets_len == PAGE_SIZE) + sev_secrets_pa = cc_info->secrets_phys; + else + return false; + + setup_cpuid_table(cc_info); + + svsm_setup(cc_info); + + /* + * The CC blob will be used later to access the secrets page. Cache + * it here like the boot kernel does. + */ + bp->cc_blob_address = (u32)(unsigned long)cc_info; + + return true; +} diff --git a/arch/x86/boot/startup/sme.c b/arch/x86/boot/startup/sme.c new file mode 100644 index 000000000..c07a2c381 --- /dev/null +++ b/arch/x86/boot/startup/sme.c @@ -0,0 +1,577 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * AMD Memory Encryption Support + * + * Copyright (C) 2016 Advanced Micro Devices, Inc. + * + * Author: Tom Lendacky <thomas.lendacky@amd.com> + */ + +/* + * Since we're dealing with identity mappings, physical and virtual + * addresses are the same, so override these defines which are ultimately + * used by the headers in misc.h. + */ +#define __pa(x) ((unsigned long)(x)) +#define __va(x) ((void *)((unsigned long)(x))) + +/* + * Special hack: we have to be careful, because no indirections are + * allowed here, and paravirt_ops is a kind of one. As it will only run in + * baremetal anyway, we just keep it from happening. (This list needs to + * be extended when new paravirt and debugging variants are added.) + */ +#undef CONFIG_PARAVIRT +#undef CONFIG_PARAVIRT_XXL +#undef CONFIG_PARAVIRT_SPINLOCKS +#undef CONFIG_ARCH_HAS_LAZY_MMU_MODE + +/* + * This code runs before CPU feature bits are set. By default, the + * pgtable_l5_enabled() function uses bit X86_FEATURE_LA57 to determine if + * 5-level paging is active, so that won't work here. USE_EARLY_PGTABLE_L5 + * is provided to handle this situation and, instead, use a variable that + * has been set by the early boot code. + */ +#define USE_EARLY_PGTABLE_L5 + +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/mem_encrypt.h> +#include <linux/cc_platform.h> + +#include <asm/init.h> +#include <asm/setup.h> +#include <asm/sections.h> +#include <asm/cpuid/api.h> +#include <asm/coco.h> +#include <asm/sev.h> + +#define PGD_FLAGS _KERNPG_TABLE_NOENC +#define P4D_FLAGS _KERNPG_TABLE_NOENC +#define PUD_FLAGS _KERNPG_TABLE_NOENC +#define PMD_FLAGS _KERNPG_TABLE_NOENC + +#define PMD_FLAGS_LARGE (__PAGE_KERNEL_LARGE_EXEC & ~_PAGE_GLOBAL) + +#define PMD_FLAGS_DEC PMD_FLAGS_LARGE +#define PMD_FLAGS_DEC_WP ((PMD_FLAGS_DEC & ~_PAGE_LARGE_CACHE_MASK) | \ + (_PAGE_PAT_LARGE | _PAGE_PWT)) + +#define PMD_FLAGS_ENC (PMD_FLAGS_LARGE | _PAGE_ENC) + +#define PTE_FLAGS (__PAGE_KERNEL_EXEC & ~_PAGE_GLOBAL) + +#define PTE_FLAGS_DEC PTE_FLAGS +#define PTE_FLAGS_DEC_WP ((PTE_FLAGS_DEC & ~_PAGE_CACHE_MASK) | \ + (_PAGE_PAT | _PAGE_PWT)) + +#define PTE_FLAGS_ENC (PTE_FLAGS | _PAGE_ENC) + +struct sme_populate_pgd_data { + void *pgtable_area; + pgd_t *pgd; + + pmdval_t pmd_flags; + pteval_t pte_flags; + unsigned long paddr; + + unsigned long vaddr; + unsigned long vaddr_end; +}; + +/* + * This work area lives in the .init.scratch section, which lives outside of + * the kernel proper. It is sized to hold the intermediate copy buffer and + * more than enough pagetable pages. + * + * By using this section, the kernel can be encrypted in place and it + * avoids any possibility of boot parameters or initramfs images being + * placed such that the in-place encryption logic overwrites them. This + * section is 2MB aligned to allow for simple pagetable setup using only + * PMD entries (see vmlinux.lds.S). + */ +static char sme_workarea[2 * PMD_SIZE] __section(".init.scratch"); + +static void __init sme_clear_pgd(struct sme_populate_pgd_data *ppd) +{ + unsigned long pgd_start, pgd_end, pgd_size; + pgd_t *pgd_p; + + pgd_start = ppd->vaddr & PGDIR_MASK; + pgd_end = ppd->vaddr_end & PGDIR_MASK; + + pgd_size = (((pgd_end - pgd_start) / PGDIR_SIZE) + 1) * sizeof(pgd_t); + + pgd_p = ppd->pgd + pgd_index(ppd->vaddr); + + memset(pgd_p, 0, pgd_size); +} + +static pud_t __init *sme_prepare_pgd(struct sme_populate_pgd_data *ppd) +{ + pgd_t *pgd; + p4d_t *p4d; + pud_t *pud; + pmd_t *pmd; + + pgd = ppd->pgd + pgd_index(ppd->vaddr); + if (pgd_none(*pgd)) { + p4d = ppd->pgtable_area; + memset(p4d, 0, sizeof(*p4d) * PTRS_PER_P4D); + ppd->pgtable_area += sizeof(*p4d) * PTRS_PER_P4D; + set_pgd(pgd, __pgd(PGD_FLAGS | __pa(p4d))); + } + + p4d = p4d_offset(pgd, ppd->vaddr); + if (p4d_none(*p4d)) { + pud = ppd->pgtable_area; + memset(pud, 0, sizeof(*pud) * PTRS_PER_PUD); + ppd->pgtable_area += sizeof(*pud) * PTRS_PER_PUD; + set_p4d(p4d, __p4d(P4D_FLAGS | __pa(pud))); + } + + pud = pud_offset(p4d, ppd->vaddr); + if (pud_none(*pud)) { + pmd = ppd->pgtable_area; + memset(pmd, 0, sizeof(*pmd) * PTRS_PER_PMD); + ppd->pgtable_area += sizeof(*pmd) * PTRS_PER_PMD; + set_pud(pud, __pud(PUD_FLAGS | __pa(pmd))); + } + + if (pud_leaf(*pud)) + return NULL; + + return pud; +} + +static void __init sme_populate_pgd_large(struct sme_populate_pgd_data *ppd) +{ + pud_t *pud; + pmd_t *pmd; + + pud = sme_prepare_pgd(ppd); + if (!pud) + return; + + pmd = pmd_offset(pud, ppd->vaddr); + if (pmd_leaf(*pmd)) + return; + + set_pmd(pmd, __pmd(ppd->paddr | ppd->pmd_flags)); +} + +static void __init sme_populate_pgd(struct sme_populate_pgd_data *ppd) +{ + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + + pud = sme_prepare_pgd(ppd); + if (!pud) + return; + + pmd = pmd_offset(pud, ppd->vaddr); + if (pmd_none(*pmd)) { + pte = ppd->pgtable_area; + memset(pte, 0, sizeof(*pte) * PTRS_PER_PTE); + ppd->pgtable_area += sizeof(*pte) * PTRS_PER_PTE; + set_pmd(pmd, __pmd(PMD_FLAGS | __pa(pte))); + } + + if (pmd_leaf(*pmd)) + return; + + pte = pte_offset_kernel(pmd, ppd->vaddr); + if (pte_none(*pte)) + set_pte(pte, __pte(ppd->paddr | ppd->pte_flags)); +} + +static void __init __sme_map_range_pmd(struct sme_populate_pgd_data *ppd) +{ + while (ppd->vaddr < ppd->vaddr_end) { + sme_populate_pgd_large(ppd); + + ppd->vaddr += PMD_SIZE; + ppd->paddr += PMD_SIZE; + } +} + +static void __init __sme_map_range_pte(struct sme_populate_pgd_data *ppd) +{ + while (ppd->vaddr < ppd->vaddr_end) { + sme_populate_pgd(ppd); + + ppd->vaddr += PAGE_SIZE; + ppd->paddr += PAGE_SIZE; + } +} + +static void __init __sme_map_range(struct sme_populate_pgd_data *ppd, + pmdval_t pmd_flags, pteval_t pte_flags) +{ + unsigned long vaddr_end; + + ppd->pmd_flags = pmd_flags; + ppd->pte_flags = pte_flags; + + /* Save original end value since we modify the struct value */ + vaddr_end = ppd->vaddr_end; + + /* If start is not 2MB aligned, create PTE entries */ + ppd->vaddr_end = ALIGN(ppd->vaddr, PMD_SIZE); + __sme_map_range_pte(ppd); + + /* Create PMD entries */ + ppd->vaddr_end = vaddr_end & PMD_MASK; + __sme_map_range_pmd(ppd); + + /* If end is not 2MB aligned, create PTE entries */ + ppd->vaddr_end = vaddr_end; + __sme_map_range_pte(ppd); +} + +static void __init sme_map_range_encrypted(struct sme_populate_pgd_data *ppd) +{ + __sme_map_range(ppd, PMD_FLAGS_ENC, PTE_FLAGS_ENC); +} + +static void __init sme_map_range_decrypted(struct sme_populate_pgd_data *ppd) +{ + __sme_map_range(ppd, PMD_FLAGS_DEC, PTE_FLAGS_DEC); +} + +static void __init sme_map_range_decrypted_wp(struct sme_populate_pgd_data *ppd) +{ + __sme_map_range(ppd, PMD_FLAGS_DEC_WP, PTE_FLAGS_DEC_WP); +} + +static unsigned long __init sme_pgtable_calc(unsigned long len) +{ + unsigned long entries = 0, tables = 0; + + /* + * Perform a relatively simplistic calculation of the pagetable + * entries that are needed. Those mappings will be covered mostly + * by 2MB PMD entries so we can conservatively calculate the required + * number of P4D, PUD and PMD structures needed to perform the + * mappings. For mappings that are not 2MB aligned, PTE mappings + * would be needed for the start and end portion of the address range + * that fall outside of the 2MB alignment. This results in, at most, + * two extra pages to hold PTE entries for each range that is mapped. + * Incrementing the count for each covers the case where the addresses + * cross entries. + */ + + /* PGDIR_SIZE is equal to P4D_SIZE on 4-level machine. */ + if (PTRS_PER_P4D > 1) + entries += (DIV_ROUND_UP(len, PGDIR_SIZE) + 1) * sizeof(p4d_t) * PTRS_PER_P4D; + entries += (DIV_ROUND_UP(len, P4D_SIZE) + 1) * sizeof(pud_t) * PTRS_PER_PUD; + entries += (DIV_ROUND_UP(len, PUD_SIZE) + 1) * sizeof(pmd_t) * PTRS_PER_PMD; + entries += 2 * sizeof(pte_t) * PTRS_PER_PTE; + + /* + * Now calculate the added pagetable structures needed to populate + * the new pagetables. + */ + + if (PTRS_PER_P4D > 1) + tables += DIV_ROUND_UP(entries, PGDIR_SIZE) * sizeof(p4d_t) * PTRS_PER_P4D; + tables += DIV_ROUND_UP(entries, P4D_SIZE) * sizeof(pud_t) * PTRS_PER_PUD; + tables += DIV_ROUND_UP(entries, PUD_SIZE) * sizeof(pmd_t) * PTRS_PER_PMD; + + return entries + tables; +} + +void __init sme_encrypt_kernel(struct boot_params *bp) +{ + unsigned long workarea_start, workarea_end, workarea_len; + unsigned long execute_start, execute_end, execute_len; + unsigned long kernel_start, kernel_end, kernel_len; + unsigned long initrd_start, initrd_end, initrd_len; + struct sme_populate_pgd_data ppd; + unsigned long pgtable_area_len; + unsigned long decrypted_base; + + /* + * This is early code, use an open coded check for SME instead of + * using cc_platform_has(). This eliminates worries about removing + * instrumentation or checking boot_cpu_data in the cc_platform_has() + * function. + */ + if (!sme_get_me_mask() || sev_status & MSR_AMD64_SEV_ENABLED) + return; + + /* + * Prepare for encrypting the kernel and initrd by building new + * pagetables with the necessary attributes needed to encrypt the + * kernel in place. + * + * One range of virtual addresses will map the memory occupied + * by the kernel and initrd as encrypted. + * + * Another range of virtual addresses will map the memory occupied + * by the kernel and initrd as decrypted and write-protected. + * + * The use of write-protect attribute will prevent any of the + * memory from being cached. + */ + + kernel_start = (unsigned long)rip_rel_ptr(_text); + kernel_end = ALIGN((unsigned long)rip_rel_ptr(_end), PMD_SIZE); + kernel_len = kernel_end - kernel_start; + + initrd_start = 0; + initrd_end = 0; + initrd_len = 0; +#ifdef CONFIG_BLK_DEV_INITRD + initrd_len = (unsigned long)bp->hdr.ramdisk_size | + ((unsigned long)bp->ext_ramdisk_size << 32); + if (initrd_len) { + initrd_start = (unsigned long)bp->hdr.ramdisk_image | + ((unsigned long)bp->ext_ramdisk_image << 32); + initrd_end = PAGE_ALIGN(initrd_start + initrd_len); + initrd_len = initrd_end - initrd_start; + } +#endif + + /* + * Calculate required number of workarea bytes needed: + * executable encryption area size: + * stack page (PAGE_SIZE) + * encryption routine page (PAGE_SIZE) + * intermediate copy buffer (PMD_SIZE) + * pagetable structures for the encryption of the kernel + * pagetable structures for workarea (in case not currently mapped) + */ + execute_start = workarea_start = (unsigned long)rip_rel_ptr(sme_workarea); + execute_end = execute_start + (PAGE_SIZE * 2) + PMD_SIZE; + execute_len = execute_end - execute_start; + + /* + * One PGD for both encrypted and decrypted mappings and a set of + * PUDs and PMDs for each of the encrypted and decrypted mappings. + */ + pgtable_area_len = sizeof(pgd_t) * PTRS_PER_PGD; + pgtable_area_len += sme_pgtable_calc(execute_end - kernel_start) * 2; + if (initrd_len) + pgtable_area_len += sme_pgtable_calc(initrd_len) * 2; + + /* PUDs and PMDs needed in the current pagetables for the workarea */ + pgtable_area_len += sme_pgtable_calc(execute_len + pgtable_area_len); + + /* + * The total workarea includes the executable encryption area and + * the pagetable area. The start of the workarea is already 2MB + * aligned, align the end of the workarea on a 2MB boundary so that + * we don't try to create/allocate PTE entries from the workarea + * before it is mapped. + */ + workarea_len = execute_len + pgtable_area_len; + workarea_end = ALIGN(workarea_start + workarea_len, PMD_SIZE); + + /* + * Set the address to the start of where newly created pagetable + * structures (PGDs, PUDs and PMDs) will be allocated. New pagetable + * structures are created when the workarea is added to the current + * pagetables and when the new encrypted and decrypted kernel + * mappings are populated. + */ + ppd.pgtable_area = (void *)execute_end; + + /* + * Make sure the current pagetable structure has entries for + * addressing the workarea. + */ + ppd.pgd = (pgd_t *)native_read_cr3_pa(); + ppd.paddr = workarea_start; + ppd.vaddr = workarea_start; + ppd.vaddr_end = workarea_end; + sme_map_range_decrypted(&ppd); + + /* Flush the TLB - no globals so cr3 is enough */ + native_write_cr3(__native_read_cr3()); + + /* + * A new pagetable structure is being built to allow for the kernel + * and initrd to be encrypted. It starts with an empty PGD that will + * then be populated with new PUDs and PMDs as the encrypted and + * decrypted kernel mappings are created. + */ + ppd.pgd = ppd.pgtable_area; + memset(ppd.pgd, 0, sizeof(pgd_t) * PTRS_PER_PGD); + ppd.pgtable_area += sizeof(pgd_t) * PTRS_PER_PGD; + + /* + * A different PGD index/entry must be used to get different + * pagetable entries for the decrypted mapping. Choose the next + * PGD index and convert it to a virtual address to be used as + * the base of the mapping. + */ + decrypted_base = (pgd_index(workarea_end) + 1) & (PTRS_PER_PGD - 1); + if (initrd_len) { + unsigned long check_base; + + check_base = (pgd_index(initrd_end) + 1) & (PTRS_PER_PGD - 1); + decrypted_base = max(decrypted_base, check_base); + } + decrypted_base <<= PGDIR_SHIFT; + + /* Add encrypted kernel (identity) mappings */ + ppd.paddr = kernel_start; + ppd.vaddr = kernel_start; + ppd.vaddr_end = kernel_end; + sme_map_range_encrypted(&ppd); + + /* Add decrypted, write-protected kernel (non-identity) mappings */ + ppd.paddr = kernel_start; + ppd.vaddr = kernel_start + decrypted_base; + ppd.vaddr_end = kernel_end + decrypted_base; + sme_map_range_decrypted_wp(&ppd); + + if (initrd_len) { + /* Add encrypted initrd (identity) mappings */ + ppd.paddr = initrd_start; + ppd.vaddr = initrd_start; + ppd.vaddr_end = initrd_end; + sme_map_range_encrypted(&ppd); + /* + * Add decrypted, write-protected initrd (non-identity) mappings + */ + ppd.paddr = initrd_start; + ppd.vaddr = initrd_start + decrypted_base; + ppd.vaddr_end = initrd_end + decrypted_base; + sme_map_range_decrypted_wp(&ppd); + } + + /* Add decrypted workarea mappings to both kernel mappings */ + ppd.paddr = workarea_start; + ppd.vaddr = workarea_start; + ppd.vaddr_end = workarea_end; + sme_map_range_decrypted(&ppd); + + ppd.paddr = workarea_start; + ppd.vaddr = workarea_start + decrypted_base; + ppd.vaddr_end = workarea_end + decrypted_base; + sme_map_range_decrypted(&ppd); + + /* Perform the encryption */ + sme_encrypt_execute(kernel_start, kernel_start + decrypted_base, + kernel_len, workarea_start, (unsigned long)ppd.pgd); + + if (initrd_len) + sme_encrypt_execute(initrd_start, initrd_start + decrypted_base, + initrd_len, workarea_start, + (unsigned long)ppd.pgd); + + /* + * At this point we are running encrypted. Remove the mappings for + * the decrypted areas - all that is needed for this is to remove + * the PGD entry/entries. + */ + ppd.vaddr = kernel_start + decrypted_base; + ppd.vaddr_end = kernel_end + decrypted_base; + sme_clear_pgd(&ppd); + + if (initrd_len) { + ppd.vaddr = initrd_start + decrypted_base; + ppd.vaddr_end = initrd_end + decrypted_base; + sme_clear_pgd(&ppd); + } + + ppd.vaddr = workarea_start + decrypted_base; + ppd.vaddr_end = workarea_end + decrypted_base; + sme_clear_pgd(&ppd); + + /* Flush the TLB - no globals so cr3 is enough */ + native_write_cr3(__native_read_cr3()); +} + +void __init sme_enable(struct boot_params *bp) +{ + unsigned int eax, ebx, ecx, edx; + unsigned long feature_mask; + unsigned long me_mask; + bool snp_en; + u64 msr; + + snp_en = snp_init(bp); + + /* Check for the SME/SEV support leaf */ + eax = 0x80000000; + ecx = 0; + native_cpuid(&eax, &ebx, &ecx, &edx); + if (eax < 0x8000001f) + return; + +#define AMD_SME_BIT BIT(0) +#define AMD_SEV_BIT BIT(1) + + /* + * Check for the SME/SEV feature: + * CPUID Fn8000_001F[EAX] + * - Bit 0 - Secure Memory Encryption support + * - Bit 1 - Secure Encrypted Virtualization support + * CPUID Fn8000_001F[EBX] + * - Bits 5:0 - Pagetable bit position used to indicate encryption + */ + eax = 0x8000001f; + ecx = 0; + native_cpuid(&eax, &ebx, &ecx, &edx); + /* Check whether SEV or SME is supported */ + if (!(eax & (AMD_SEV_BIT | AMD_SME_BIT))) + return; + + me_mask = 1UL << (ebx & 0x3f); + sev_snp_needs_sfw = !(ebx & BIT(31)); + + /* Check the SEV MSR whether SEV or SME is enabled */ + sev_status = msr = native_rdmsrq(MSR_AMD64_SEV); + feature_mask = (msr & MSR_AMD64_SEV_ENABLED) ? AMD_SEV_BIT : AMD_SME_BIT; + + /* + * Any discrepancies between the presence of a CC blob and SNP + * enablement abort the guest. + */ + if (snp_en ^ !!(msr & MSR_AMD64_SEV_SNP_ENABLED)) + sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED); + + /* Check if memory encryption is enabled */ + if (feature_mask == AMD_SME_BIT) { + if (!(bp->hdr.xloadflags & XLF_MEM_ENCRYPTION)) + return; + + /* + * No SME if Hypervisor bit is set. This check is here to + * prevent a guest from trying to enable SME. For running as a + * KVM guest the MSR_AMD64_SYSCFG will be sufficient, but there + * might be other hypervisors which emulate that MSR as non-zero + * or even pass it through to the guest. + * A malicious hypervisor can still trick a guest into this + * path, but there is no way to protect against that. + */ + eax = 1; + ecx = 0; + native_cpuid(&eax, &ebx, &ecx, &edx); + if (ecx & BIT(31)) + return; + + /* For SME, check the SYSCFG MSR */ + msr = native_rdmsrq(MSR_AMD64_SYSCFG); + if (!(msr & MSR_AMD64_SYSCFG_MEM_ENCRYPT)) + return; + } + + sme_me_mask = me_mask; + physical_mask &= ~me_mask; + cc_vendor = CC_VENDOR_AMD; + cc_set_mask(me_mask); +} + +#ifdef CONFIG_MITIGATION_PAGE_TABLE_ISOLATION +/* Local version for startup code, which never operates on user page tables */ +pgd_t __pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd) +{ + return pgd; +} +#endif |
