Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 74 insertions, 0 deletions

diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld
new file mode 100644
index 000000000..e1d594a60
--- /dev/null
+++ b/arch/x86/boot/setup.ld
@@ -0,0 +1,74 @@
+/*
+ * setup.ld
+ *
+ * Linker script for the i386 setup code
+ */
+OUTPUT_FORMAT("elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(_start)
+
+SECTIONS
+{
+	. = 0;
+	.bstext	: {
+		*(.bstext)
+		. = 495;
+	} =0xffffffff
+
+	.header		: { *(.header) }
+	.entrytext	: { *(.entrytext) }
+	.inittext	: { *(.inittext) }
+	.initdata	: { *(.initdata) }
+	__end_init = .;
+
+	.text		: { *(.text .text.*) }
+	.text32		: { *(.text32) }
+
+	.pecompat	: { *(.pecompat) }
+	PROVIDE(pecompat_fsize = setup_size - pecompat_fstart);
+
+	. = ALIGN(16);
+	.rodata		: { *(.rodata*) }
+
+	.videocards	: {
+		video_cards = .;
+		*(.videocards)
+		video_cards_end = .;
+	}
+
+	. = ALIGN(16);
+	.data		: { *(.data*) }
+
+	.signature	: {
+		setup_sig = .;
+		LONG(0x5a5aaa55)
+
+		setup_size = ALIGN(ABSOLUTE(.), 4096);
+		setup_sects = ABSOLUTE(setup_size / 512);
+		ASSERT(setup_sects >= 5, "The setup must be at least 5 sectors in size");
+		ASSERT(setup_sects <= 64, "The setup must be at most 64 sectors in size");
+	}
+
+	. = ALIGN(16);
+	.bss		:
+	{
+		__bss_start = .;
+		*(.bss)
+		__bss_end = .;
+	}
+	. = ALIGN(16);
+	_end = .;
+
+	/DISCARD/	: {
+		*(.note*)
+	}
+
+	/*
+	 * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+	 */
+	. = ASSERT(_end <= 0x8000, "Setup too big!");
+	. = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!");
+	/* Necessary for the very-old-loader check to work... */
+	. = ASSERT(__end_init <= 5*512, "init sections too big!");
+
+}