Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 139 insertions, 0 deletions

diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
new file mode 100644
index 000000000..3f9fb3698
--- /dev/null
+++ b/arch/x86/boot/Makefile
@@ -0,0 +1,139 @@
+#
+# arch/x86/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Linus Torvalds
+# Changed by many, many contributors over the years.
+#
+
+# If you want to preset the SVGA mode, uncomment the next line and
+# set SVGA_MODE to whatever number you want.
+# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
+# The number is the same as you would ordinarily press at bootup.
+
+SVGA_MODE	:= -DSVGA_MODE=NORMAL_VGA
+
+targets		:= vmlinux.bin setup.bin setup.elf bzImage
+targets		+= fdimage fdimage144 fdimage288 image.iso hdimage
+subdir-		:= compressed
+
+setup-y		+= a20.o bioscall.o cmdline.o copy.o cpu.o cpuflags.o cpucheck.o
+setup-y		+= early_serial_console.o edd.o header.o main.o memory.o
+setup-y		+= pm.o pmjump.o printf.o regs.o string.o tty.o video.o
+setup-y		+= video-mode.o version.o
+setup-$(CONFIG_X86_APM_BOOT) += apm.o
+
+# The link order of the video-*.o modules can matter.  In particular,
+# video-vga.o *must* be listed first, followed by video-vesa.o.
+# Hardware-specific drivers should follow in the order they should be
+# probed, and video-bios.o should typically be last.
+setup-y		+= video-vga.o
+setup-y		+= video-vesa.o
+setup-y		+= video-bios.o
+
+targets		+= $(setup-y)
+hostprogs	+= mkcpustr
+
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include \
+		    -include include/generated/autoconf.h \
+	            -D__EXPORTED_HEADERS__
+
+$(obj)/cpu.o: $(obj)/cpustr.h
+
+quiet_cmd_cpustr = CPUSTR  $@
+      cmd_cpustr = $(obj)/mkcpustr > $@
+$(obj)/cpustr.h: $(obj)/mkcpustr FORCE
+	$(call if_changed,cpustr)
+targets += cpustr.h
+
+# ---------------------------------------------------------------------------
+
+KBUILD_CFLAGS	:= $(REALMODE_CFLAGS) -D_SETUP
+KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
+KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables
+KBUILD_CFLAGS	+= $(CONFIG_CC_IMPLICIT_FALLTHROUGH)
+
+$(obj)/bzImage: asflags-y  := $(SVGA_MODE)
+
+quiet_cmd_image = BUILD   $@
+      cmd_image = (dd if=$< bs=4k conv=sync status=none; cat $(filter-out $<,$(real-prereqs))) >$@
+
+$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin FORCE
+	$(call if_changed,image)
+	@$(kecho) 'Kernel: $@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
+
+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
+$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,objcopy)
+
+SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
+
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [a-zA-Z] \(startup_32\|efi.._stub_entry\|efi\(32\)\?_pe_entry\|input_data\|kernel_info\|_end\|_ehead\|_text\|_e\?data\|_e\?sbat\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+
+quiet_cmd_zoffset = ZOFFSET $@
+      cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
+
+targets += zoffset.h
+$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,zoffset)
+
+
+AFLAGS_header.o += -I$(objtree)/$(obj)
+$(obj)/header.o: $(obj)/zoffset.h
+
+LDFLAGS_setup.elf	:= -m elf_i386 -z noexecstack -T
+$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
+	$(call if_changed,ld)
+
+OBJCOPYFLAGS_setup.bin	:= -O binary
+$(obj)/setup.bin: $(obj)/setup.elf FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/compressed/vmlinux: FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
+# Set this if you want to pass append arguments to the
+# bzdisk/fdimage/hdimage/isoimage kernel
+FDARGS =
+# Set this if you want one or more initrds included in the image
+FDINITRD =
+
+imgdeps = $(obj)/bzImage $(obj)/mtools.conf $(src)/genimage.sh
+
+$(obj)/mtools.conf: $(src)/mtools.conf.in
+	sed -e 's|@OBJ@|$(obj)|g' < $< > $@
+
+targets += mtools.conf
+
+# genimage.sh requires bash, but it also has a bunch of other
+# external dependencies.
+quiet_cmd_genimage = GENIMAGE $3
+      cmd_genimage = $(BASH) $(src)/genimage.sh $2 $3 $(obj)/bzImage \
+		$(obj)/mtools.conf '$(FDARGS)' $(FDINITRD)
+
+PHONY += bzdisk fdimage fdimage144 fdimage288 hdimage isoimage
+
+# This requires write access to /dev/fd0
+# All images require syslinux to be installed; hdimage also requires
+# EDK2/OVMF if the kernel is compiled with the EFI stub.
+bzdisk: $(imgdeps)
+	$(call cmd,genimage,bzdisk,/dev/fd0)
+
+fdimage fdimage144: $(imgdeps)
+	$(call cmd,genimage,fdimage144,$(obj)/fdimage)
+	@$(kecho) 'Kernel: $(obj)/fdimage is ready'
+
+fdimage288: $(imgdeps)
+	$(call cmd,genimage,fdimage288,$(obj)/fdimage)
+	@$(kecho) 'Kernel: $(obj)/fdimage is ready'
+
+hdimage: $(imgdeps)
+	$(call cmd,genimage,hdimage,$(obj)/hdimage)
+	@$(kecho) 'Kernel: $(obj)/hdimage is ready'
+
+isoimage: $(imgdeps)
+	$(call cmd,genimage,isoimage,$(obj)/image.iso)
+	@$(kecho) 'Kernel: $(obj)/image.iso is ready'