Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 72 insertions, 0 deletions

diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
new file mode 100644
index 000000000..339c42d35
--- /dev/null
+++ b/arch/sparc/boot/Makefile
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for the Sparc boot stuff.
+#
+# Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+# Copyright (C) 1997,1998 Jakub Jelinek (jj@ultra.linux.cz)
+
+ROOT_IMG	:= /usr/src/root.img
+ELFTOAOUT	:= elftoaout
+
+hostprogs	:= piggyback
+targets		:= tftpboot.img image zImage vmlinux.aout
+clean-files	:= System.map
+
+quiet_cmd_elftoaout	= ELFTOAOUT $@
+      cmd_elftoaout	= $(ELFTOAOUT) $(obj)/image -o $@
+quiet_cmd_piggy		= PIGGY   $@
+      cmd_piggy		= $(obj)/piggyback $(BITS) $@ System.map $(ROOT_IMG)
+quiet_cmd_strip		= STRIP   $@
+      cmd_strip		= $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $< -o $@
+
+ifeq ($(CONFIG_SPARC64),y)
+
+# Actual linking
+
+$(obj)/zImage: $(obj)/image FORCE
+	$(call if_changed,gzip)
+	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
+
+$(obj)/vmlinux.aout: vmlinux FORCE
+	$(call if_changed,elftoaout)
+	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
+else
+
+$(obj)/zImage: $(obj)/image FORCE
+	$(call if_changed,strip)
+	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
+
+# The following lines make a readable image for U-Boot.
+#  uImage   - Binary file read by U-boot
+#  uImage.o - object file of uImage for loading with a
+#             flash programmer understanding ELF.
+
+OBJCOPYFLAGS_image.bin := -S -O binary -R .note -R .comment
+$(obj)/image.bin: $(obj)/image FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/image.gz: $(obj)/image.bin FORCE
+	$(call if_changed,gzip)
+
+UIMAGE_LOADADDR = $(CONFIG_UBOOT_LOAD_ADDR)
+UIMAGE_ENTRYADDR = $(CONFIG_UBOOT_ENTRY_ADDR)
+UIMAGE_COMPRESSION = gzip
+
+quiet_cmd_uimage.o = UIMAGE.O $@
+      cmd_uimage.o = $(LD) -Tdata $(CONFIG_UBOOT_FLASH_ADDR) \
+                     -r -b binary $@ -o $@.o
+
+targets += uImage
+$(obj)/uImage: $(obj)/image.gz FORCE
+	$(call if_changed,uimage)
+	$(call if_changed,uimage.o)
+	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
+
+endif
+
+$(obj)/image: vmlinux FORCE
+	$(call if_changed,strip)
+	@$(kecho) 'Kernel: $@ is ready' '(#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'
+
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback System.map $(ROOT_IMG) FORCE
+	$(call if_changed,elftoaout)
+	$(call if_changed,piggy)