Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 116 insertions, 0 deletions

diff --git a/arch/riscv/lib/delay.c b/arch/riscv/lib/delay.c
new file mode 100644
index 000000000..bd9b38256
--- /dev/null
+++ b/arch/riscv/lib/delay.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ */
+
+#include <linux/delay.h>
+#include <linux/math.h>
+#include <linux/param.h>
+#include <linux/types.h>
+#include <linux/export.h>
+
+#include <asm/processor.h>
+
+/*
+ * This is copies from arch/arm/include/asm/delay.h
+ *
+ * Loop (or tick) based delay:
+ *
+ * loops = loops_per_jiffy * jiffies_per_sec * delay_us / us_per_sec
+ *
+ * where:
+ *
+ * jiffies_per_sec = HZ
+ * us_per_sec = 1000000
+ *
+ * Therefore the constant part is HZ / 1000000 which is a small
+ * fractional number. To make this usable with integer math, we
+ * scale up this constant by 2^31, perform the actual multiplication,
+ * and scale the result back down by 2^31 with a simple shift:
+ *
+ * loops = (loops_per_jiffy * delay_us * UDELAY_MULT) >> 31
+ *
+ * where:
+ *
+ * UDELAY_MULT = 2^31 * HZ / 1000000
+ *             = (2^31 / 1000000) * HZ
+ *             = 2147.483648 * HZ
+ *             = 2147 * HZ + 483648 * HZ / 1000000
+ *
+ * 31 is the biggest scale shift value that won't overflow 32 bits for
+ * delay_us * UDELAY_MULT assuming HZ <= 1000 and delay_us <= 2000.
+ */
+#define MAX_UDELAY_US	2000
+#define MAX_UDELAY_HZ	1000
+#define UDELAY_MULT	(2147UL * HZ + 483648UL * HZ / 1000000UL)
+#define UDELAY_SHIFT	31
+
+#if HZ > MAX_UDELAY_HZ
+#error "HZ > MAX_UDELAY_HZ"
+#endif
+
+/*
+ * RISC-V supports both UDELAY and NDELAY.  This is largely the same as above,
+ * but with different constants.  I added 10 bits to the shift to get this, but
+ * the result is that I need a 64-bit multiply, which is slow on 32-bit
+ * platforms.
+ *
+ * NDELAY_MULT = 2^41 * HZ / 1000000000
+ *             = (2^41 / 1000000000) * HZ
+ *             = 2199.02325555 * HZ
+ *             = 2199 * HZ + 23255550 * HZ / 1000000000
+ *
+ * The maximum here is to avoid 64-bit overflow, but it isn't checked as it
+ * won't happen.
+ */
+#define MAX_NDELAY_NS   (1ULL << 42)
+#define MAX_NDELAY_HZ	MAX_UDELAY_HZ
+#define NDELAY_MULT	((unsigned long long)(2199ULL * HZ + 23255550ULL * HZ / 1000000000ULL))
+#define NDELAY_SHIFT	41
+
+#if HZ > MAX_NDELAY_HZ
+#error "HZ > MAX_NDELAY_HZ"
+#endif
+
+void __delay(unsigned long cycles)
+{
+	u64 t0 = get_cycles();
+
+	while ((unsigned long)(get_cycles() - t0) < cycles)
+		cpu_relax();
+}
+EXPORT_SYMBOL(__delay);
+
+void udelay(unsigned long usecs)
+{
+	u64 ucycles = (u64)usecs * lpj_fine * UDELAY_MULT;
+	u64 n;
+
+	if (unlikely(usecs > MAX_UDELAY_US)) {
+		n = (u64)usecs * riscv_timebase;
+		do_div(n, 1000000);
+
+		__delay(n);
+		return;
+	}
+
+	__delay(ucycles >> UDELAY_SHIFT);
+}
+EXPORT_SYMBOL(udelay);
+
+void ndelay(unsigned long nsecs)
+{
+	/*
+	 * This doesn't bother checking for overflow, as it won't happen (it's
+	 * an hour) of delay.
+	 */
+	unsigned long long ncycles = nsecs * lpj_fine * NDELAY_MULT;
+	__delay(ncycles >> NDELAY_SHIFT);
+}
+EXPORT_SYMBOL(ndelay);
+
+bool delay_read_timer(unsigned long *timer_val)
+{
+	*timer_val = get_cycles();
+	return true;
+}