Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 58 insertions, 0 deletions

diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
new file mode 100644
index 000000000..4a2d75b7e
--- /dev/null
+++ b/arch/riscv/boot/Makefile
@@ -0,0 +1,58 @@
+#
+# arch/riscv/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2018, Anup Patel.
+# Author: Anup Patel <anup@brainfault.org>
+#
+# Based on the ia64 and arm64 boot/Makefile.
+#
+
+OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+OBJCOPYFLAGS_loader.bin :=-O binary
+
+targets := Image Image.* loader loader.o loader.lds loader.bin
+
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/Image.gz: $(obj)/Image FORCE
+	$(call if_changed,gzip)
+
+$(obj)/loader.o: $(src)/loader.S $(obj)/Image
+
+$(obj)/loader: $(obj)/loader.o $(obj)/Image $(obj)/loader.lds FORCE
+	$(Q)$(LD) -T $(obj)/loader.lds -o $@ $(obj)/loader.o
+
+$(obj)/Image.bz2: $(obj)/Image FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/Image.lz4: $(obj)/Image FORCE
+	$(call if_changed,lz4)
+
+$(obj)/Image.lzma: $(obj)/Image FORCE
+	$(call if_changed,lzma)
+
+$(obj)/Image.lzo: $(obj)/Image FORCE
+	$(call if_changed,lzo)
+
+$(obj)/Image.zst: $(obj)/Image FORCE
+	$(call if_changed,zstd)
+
+$(obj)/Image.xz: $(obj)/Image FORCE
+	$(call if_changed,xzkern)
+
+$(obj)/loader.bin: $(obj)/loader FORCE
+	$(call if_changed,objcopy)
+
+EFI_ZBOOT_PAYLOAD	:= Image
+EFI_ZBOOT_BFD_TARGET	:= elf$(BITS)-littleriscv
+EFI_ZBOOT_MACH_TYPE	:= RISCV$(BITS)
+
+include $(srctree)/drivers/firmware/efi/libstub/Makefile.zboot