usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stopgrafted

cc_debounce_dwork is queued from the set_cc() and start_toggling()
callbacks, which run from TCPM's kthread worker.  port_stop() returns
before tcpm_unregister_port() destroys that worker.  Flushing the worker
during unregister may therefore run a callback which queues the delayed
work after port_stop() has returned.

The delayed work can then run after devres has freed pmic_typec_port.

Use disable_delayed_work_sync() in port_stop() to cancel a pending
instance and prevent the TCPM callbacks from queueing another one.

This issue was found by an in-house static analysis tool.

Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Cc: stable <stable@kernel.org>  # v6.10+
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260820135307.153773-2-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 64 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h
new file mode 100644
index 000000000..7f5df03d3
--- /dev/null
+++ b/arch/powerpc/sysdev/dart.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ */
+
+#ifndef _POWERPC_SYSDEV_DART_H
+#define _POWERPC_SYSDEV_DART_H
+
+
+/* Offset from base to control register */
+#define DART_CNTL	0
+
+/* Offset from base to exception register */
+#define DART_EXCP_U3	0x10
+/* Offset from base to TLB tag registers */
+#define DART_TAGS_U3	0x1000
+
+/* U4 registers */
+#define DART_BASE_U4	0x10
+#define DART_SIZE_U4	0x20
+#define DART_EXCP_U4	0x30
+#define DART_TAGS_U4	0x1000
+
+/* Control Register fields */
+
+/* U3 registers */
+#define DART_CNTL_U3_BASE_MASK	0xfffff
+#define DART_CNTL_U3_BASE_SHIFT	12
+#define DART_CNTL_U3_FLUSHTLB	0x400
+#define DART_CNTL_U3_ENABLE	0x200
+#define DART_CNTL_U3_SIZE_MASK	0x1ff
+#define DART_CNTL_U3_SIZE_SHIFT	0
+
+/* U4 registers */
+#define DART_BASE_U4_BASE_MASK	0xffffff
+#define DART_BASE_U4_BASE_SHIFT	0
+#define DART_CNTL_U4_ENABLE	0x80000000
+#define DART_CNTL_U4_IONE	0x40000000
+#define DART_CNTL_U4_FLUSHTLB	0x20000000
+#define DART_CNTL_U4_IDLE	0x10000000
+#define DART_CNTL_U4_PAR_EN	0x08000000
+#define DART_CNTL_U4_IONE_MASK	0x07ffffff
+#define DART_SIZE_U4_SIZE_MASK	0x1fff
+#define DART_SIZE_U4_SIZE_SHIFT	0
+
+#define DART_REG(r)	(dart + ((r) >> 2))
+#define DART_IN(r)	(in_be32(DART_REG(r)))
+#define DART_OUT(r,v)	(out_be32(DART_REG(r), (v)))
+
+
+/* size of table in pages */
+
+
+/* DART table fields */
+
+#define DARTMAP_VALID   0x80000000
+#define DARTMAP_RPNMASK 0x00ffffff
+
+
+#define DART_PAGE_SHIFT		12
+#define DART_PAGE_SIZE		(1 << DART_PAGE_SHIFT)
+
+
+#endif /* _POWERPC_SYSDEV_DART_H */