Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 344 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
new file mode 100644
index 000000000..14cc5ea93
--- /dev/null
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -0,0 +1,344 @@
+/*
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999-2001 Dan Malek <dan@embeddedalley.com>
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ *	2.3.99 Updates
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ * 	Merged to arch/powerpc from arch/ppc/syslib/cpm2_common.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space.  The allocator for that is here.  When the communication
+ * process is reset, we reclaim the memory available.  There is
+ * currently no deallocator for this memory.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/cpm2.h>
+#include <asm/rheap.h>
+
+#include <sysdev/fsl_soc.h>
+
+cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+cpm2_map_t __iomem *cpm2_immr;
+EXPORT_SYMBOL(cpm2_immr);
+
+#define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
+					   of space for CPM as it is larger
+					   than on PQ2 */
+
+void __init cpm2_reset(void)
+{
+#ifdef CONFIG_PPC_85xx
+	cpm2_immr = ioremap(get_immrbase() + 0x80000, CPM_MAP_SIZE);
+#else
+	cpm2_immr = ioremap(get_immrbase(), CPM_MAP_SIZE);
+#endif
+
+	/* Tell everyone where the comm processor resides.
+	 */
+	cpmp = &cpm2_immr->im_cpm;
+
+#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
+	/* Reset the CPM.
+	 */
+	cpm_command(CPM_CR_RST, 0);
+#endif
+}
+
+static DEFINE_SPINLOCK(cmd_lock);
+
+#define MAX_CR_CMD_LOOPS        10000
+
+int cpm_command(u32 command, u8 opcode)
+{
+	int i, ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cmd_lock, flags);
+
+	ret = 0;
+	out_be32(&cpmp->cp_cpcr, command | opcode | CPM_CR_FLG);
+	for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+		if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
+			goto out;
+
+	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
+	ret = -EIO;
+out:
+	spin_unlock_irqrestore(&cmd_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(cpm_command);
+
+/* Set a baud rate generator.  This needs lots of work.  There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks.  The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers).  Documentation uses 1-based numbering.
+ */
+void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
+{
+	u32 __iomem *bp;
+	u32 val;
+
+	/* This is good enough to get SMCs running.....
+	*/
+	if (brg < 4) {
+		bp = &cpm2_immr->im_brgc1;
+	} else {
+		bp = &cpm2_immr->im_brgc5;
+		brg -= 4;
+	}
+	bp += brg;
+	/* Round the clock divider to the nearest integer. */
+	val = (((clk * 2 / rate) - 1) & ~1) | CPM_BRG_EN | src;
+	if (div16)
+		val |= CPM_BRG_DIV16;
+
+	out_be32(bp, val);
+}
+EXPORT_SYMBOL(__cpm2_setbrg);
+
+int __init cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
+{
+	int ret = 0;
+	int shift;
+	int i, bits = 0;
+	u32 __iomem *reg;
+	u32 mask = 7;
+
+	u8 clk_map[][3] = {
+		{CPM_CLK_FCC1, CPM_BRG5, 0},
+		{CPM_CLK_FCC1, CPM_BRG6, 1},
+		{CPM_CLK_FCC1, CPM_BRG7, 2},
+		{CPM_CLK_FCC1, CPM_BRG8, 3},
+		{CPM_CLK_FCC1, CPM_CLK9, 4},
+		{CPM_CLK_FCC1, CPM_CLK10, 5},
+		{CPM_CLK_FCC1, CPM_CLK11, 6},
+		{CPM_CLK_FCC1, CPM_CLK12, 7},
+		{CPM_CLK_FCC2, CPM_BRG5, 0},
+		{CPM_CLK_FCC2, CPM_BRG6, 1},
+		{CPM_CLK_FCC2, CPM_BRG7, 2},
+		{CPM_CLK_FCC2, CPM_BRG8, 3},
+		{CPM_CLK_FCC2, CPM_CLK13, 4},
+		{CPM_CLK_FCC2, CPM_CLK14, 5},
+		{CPM_CLK_FCC2, CPM_CLK15, 6},
+		{CPM_CLK_FCC2, CPM_CLK16, 7},
+		{CPM_CLK_FCC3, CPM_BRG5, 0},
+		{CPM_CLK_FCC3, CPM_BRG6, 1},
+		{CPM_CLK_FCC3, CPM_BRG7, 2},
+		{CPM_CLK_FCC3, CPM_BRG8, 3},
+		{CPM_CLK_FCC3, CPM_CLK13, 4},
+		{CPM_CLK_FCC3, CPM_CLK14, 5},
+		{CPM_CLK_FCC3, CPM_CLK15, 6},
+		{CPM_CLK_FCC3, CPM_CLK16, 7},
+		{CPM_CLK_SCC1, CPM_BRG1, 0},
+		{CPM_CLK_SCC1, CPM_BRG2, 1},
+		{CPM_CLK_SCC1, CPM_BRG3, 2},
+		{CPM_CLK_SCC1, CPM_BRG4, 3},
+		{CPM_CLK_SCC1, CPM_CLK11, 4},
+		{CPM_CLK_SCC1, CPM_CLK12, 5},
+		{CPM_CLK_SCC1, CPM_CLK3, 6},
+		{CPM_CLK_SCC1, CPM_CLK4, 7},
+		{CPM_CLK_SCC2, CPM_BRG1, 0},
+		{CPM_CLK_SCC2, CPM_BRG2, 1},
+		{CPM_CLK_SCC2, CPM_BRG3, 2},
+		{CPM_CLK_SCC2, CPM_BRG4, 3},
+		{CPM_CLK_SCC2, CPM_CLK11, 4},
+		{CPM_CLK_SCC2, CPM_CLK12, 5},
+		{CPM_CLK_SCC2, CPM_CLK3, 6},
+		{CPM_CLK_SCC2, CPM_CLK4, 7},
+		{CPM_CLK_SCC3, CPM_BRG1, 0},
+		{CPM_CLK_SCC3, CPM_BRG2, 1},
+		{CPM_CLK_SCC3, CPM_BRG3, 2},
+		{CPM_CLK_SCC3, CPM_BRG4, 3},
+		{CPM_CLK_SCC3, CPM_CLK5, 4},
+		{CPM_CLK_SCC3, CPM_CLK6, 5},
+		{CPM_CLK_SCC3, CPM_CLK7, 6},
+		{CPM_CLK_SCC3, CPM_CLK8, 7},
+		{CPM_CLK_SCC4, CPM_BRG1, 0},
+		{CPM_CLK_SCC4, CPM_BRG2, 1},
+		{CPM_CLK_SCC4, CPM_BRG3, 2},
+		{CPM_CLK_SCC4, CPM_BRG4, 3},
+		{CPM_CLK_SCC4, CPM_CLK5, 4},
+		{CPM_CLK_SCC4, CPM_CLK6, 5},
+		{CPM_CLK_SCC4, CPM_CLK7, 6},
+		{CPM_CLK_SCC4, CPM_CLK8, 7},
+	};
+
+	switch (target) {
+	case CPM_CLK_SCC1:
+		reg = &cpm2_immr->im_cpmux.cmx_scr;
+		shift = 24;
+		break;
+	case CPM_CLK_SCC2:
+		reg = &cpm2_immr->im_cpmux.cmx_scr;
+		shift = 16;
+		break;
+	case CPM_CLK_SCC3:
+		reg = &cpm2_immr->im_cpmux.cmx_scr;
+		shift = 8;
+		break;
+	case CPM_CLK_SCC4:
+		reg = &cpm2_immr->im_cpmux.cmx_scr;
+		shift = 0;
+		break;
+	case CPM_CLK_FCC1:
+		reg = &cpm2_immr->im_cpmux.cmx_fcr;
+		shift = 24;
+		break;
+	case CPM_CLK_FCC2:
+		reg = &cpm2_immr->im_cpmux.cmx_fcr;
+		shift = 16;
+		break;
+	case CPM_CLK_FCC3:
+		reg = &cpm2_immr->im_cpmux.cmx_fcr;
+		shift = 8;
+		break;
+	default:
+		printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
+		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+			bits = clk_map[i][2];
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(clk_map))
+	    ret = -EINVAL;
+
+	bits <<= shift;
+	mask <<= shift;
+
+	if (mode == CPM_CLK_RTX) {
+		bits |= bits << 3;
+		mask |= mask << 3;
+	} else if (mode == CPM_CLK_RX) {
+		bits <<= 3;
+		mask <<= 3;
+	}
+
+	out_be32(reg, (in_be32(reg) & ~mask) | bits);
+
+	return ret;
+}
+
+int __init cpm2_smc_clk_setup(enum cpm_clk_target target, int clock)
+{
+	int ret = 0;
+	int shift;
+	int i, bits = 0;
+	u8 __iomem *reg;
+	u8 mask = 3;
+
+	u8 clk_map[][3] = {
+		{CPM_CLK_SMC1, CPM_BRG1, 0},
+		{CPM_CLK_SMC1, CPM_BRG7, 1},
+		{CPM_CLK_SMC1, CPM_CLK7, 2},
+		{CPM_CLK_SMC1, CPM_CLK9, 3},
+		{CPM_CLK_SMC2, CPM_BRG2, 0},
+		{CPM_CLK_SMC2, CPM_BRG8, 1},
+		{CPM_CLK_SMC2, CPM_CLK4, 2},
+		{CPM_CLK_SMC2, CPM_CLK15, 3},
+	};
+
+	switch (target) {
+	case CPM_CLK_SMC1:
+		reg = &cpm2_immr->im_cpmux.cmx_smr;
+		mask = 3;
+		shift = 4;
+		break;
+	case CPM_CLK_SMC2:
+		reg = &cpm2_immr->im_cpmux.cmx_smr;
+		mask = 3;
+		shift = 0;
+		break;
+	default:
+		printk(KERN_ERR "cpm2_smc_clock_setup: invalid clock target\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
+		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+			bits = clk_map[i][2];
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(clk_map))
+	    ret = -EINVAL;
+
+	bits <<= shift;
+	mask <<= shift;
+
+	out_8(reg, (in_8(reg) & ~mask) | bits);
+
+	return ret;
+}
+
+struct cpm2_ioports {
+	u32 dir, par, sor, odr, dat;
+	u32 res[3];
+};
+
+void __init cpm2_set_pin(int port, int pin, int flags)
+{
+	struct cpm2_ioports __iomem *iop =
+		(struct cpm2_ioports __iomem *)&cpm2_immr->im_ioport;
+
+	pin = 1 << (31 - pin);
+
+	if (flags & CPM_PIN_OUTPUT)
+		setbits32(&iop[port].dir, pin);
+	else
+		clrbits32(&iop[port].dir, pin);
+
+	if (!(flags & CPM_PIN_GPIO))
+		setbits32(&iop[port].par, pin);
+	else
+		clrbits32(&iop[port].par, pin);
+
+	if (flags & CPM_PIN_SECONDARY)
+		setbits32(&iop[port].sor, pin);
+	else
+		clrbits32(&iop[port].sor, pin);
+
+	if (flags & CPM_PIN_OPENDRAIN)
+		setbits32(&iop[port].odr, pin);
+	else
+		clrbits32(&iop[port].odr, pin);
+}