usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stopgrafted

cc_debounce_dwork is queued from the set_cc() and start_toggling()
callbacks, which run from TCPM's kthread worker.  port_stop() returns
before tcpm_unregister_port() destroys that worker.  Flushing the worker
during unregister may therefore run a callback which queues the delayed
work after port_stop() has returned.

The delayed work can then run after devres has freed pmic_typec_port.

Use disable_delayed_work_sync() in port_stop() to cancel a pending
instance and prevent the TCPM callbacks from queueing another one.

This issue was found by an in-house static analysis tool.

Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Cc: stable <stable@kernel.org>  # v6.10+
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260820135307.153773-2-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 50 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
new file mode 100644
index 000000000..0834a9a12
--- /dev/null
+++ b/arch/powerpc/sysdev/Makefile
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+
+mpic-msi-obj-$(CONFIG_PCI_MSI)	+= mpic_msi.o mpic_u3msi.o
+obj-$(CONFIG_MPIC)		+= mpic.o $(mpic-msi-obj-y)
+obj-$(CONFIG_MPIC_TIMER)        += mpic_timer.o
+obj-$(CONFIG_FSL_MPIC_TIMER_WAKEUP)	+= fsl_mpic_timer_wakeup.o
+mpic-msgr-obj-$(CONFIG_MPIC_MSGR)	+= mpic_msgr.o
+obj-$(CONFIG_MPIC)		+= mpic.o $(mpic-msi-obj-y) $(mpic-msgr-obj-y)
+obj-$(CONFIG_PPC_EPAPR_HV_PIC)	+= ehv_pic.o
+fsl-msi-obj-$(CONFIG_PCI_MSI)	+= fsl_msi.o
+obj-$(CONFIG_PPC_MSI_BITMAP)	+= msi_bitmap.o
+
+obj-$(CONFIG_PPC_MPC106)	+= grackle.o
+obj-$(CONFIG_PPC_DCR_NATIVE)	+= dcr-low.o
+obj-$(CONFIG_U3_DART)		+= dart_iommu.o
+obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
+obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o fsl_mpic_err.o
+obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
+obj-$(CONFIG_FSL_PMC)		+= fsl_pmc.o
+obj-$(CONFIG_FSL_CORENET_RCPM)	+= fsl_rcpm.o
+obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
+obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
+obj-$(CONFIG_FSL_RIO)		+= fsl_rio.o fsl_rmu.o
+obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
+obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc_cmos_setup.o
+
+obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
+obj-$(CONFIG_PPC_I8259)		+= i8259.o
+obj-$(CONFIG_IPIC)		+= ipic.o
+obj-$(CONFIG_OF_RTC)		+= of_rtc.o
+
+obj-$(CONFIG_CPM)		+= cpm_common.o
+obj-$(CONFIG_CPM2)		+= cpm2.o cpm2_pic.o cpm_gpio.o
+obj-$(CONFIG_8xx_GPIO)		+= cpm_gpio.o
+obj-$(CONFIG_QUICC_ENGINE)	+= cpm_common.o
+obj-$(CONFIG_PPC_DCR)		+= dcr.o
+
+obj-$(CONFIG_PPC_MPC512x)	+= mpc5xxx_clocks.o
+obj-$(CONFIG_PPC_MPC52xx)	+= mpc5xxx_clocks.o
+
+ifdef CONFIG_SUSPEND
+obj-$(CONFIG_PPC_BOOK3S_32)	+= 6xx-suspend.o
+endif
+
+obj-$(CONFIG_PPC_EARLY_DEBUG_MEMCONS)	+= udbg_memcons.o
+
+obj-$(CONFIG_PPC_XICS)		+= xics/
+obj-$(CONFIG_PPC_XIVE)		+= xive/
+
+obj-$(CONFIG_GE_FPGA)		+= ge/