Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 152 insertions, 0 deletions

diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
new file mode 100644
index 000000000..1d221ff42
--- /dev/null
+++ b/arch/powerpc/boot/serial.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic serial console support
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * Code in serial_edit_cmdline() copied from <file:arch/ppc/boot/simple/misc.c>
+ * and was written by Matt Porter <mporter@kernel.crashing.org>.
+ *
+ * 2001,2006 (c) MontaVista Software, Inc.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "string.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+
+static int serial_open(void)
+{
+	struct serial_console_data *scdp = console_ops.data;
+	return scdp->open();
+}
+
+static void serial_write(const char *buf, int len)
+{
+	struct serial_console_data *scdp = console_ops.data;
+
+	while (*buf != '\0')
+		scdp->putc(*buf++);
+}
+
+static void serial_edit_cmdline(char *buf, int len, unsigned int timeout)
+{
+	int timer = 0, count;
+	char ch, *cp;
+	struct serial_console_data *scdp = console_ops.data;
+
+	count = strlen(buf);
+	cp = &buf[count];
+	count++;
+
+	do {
+		if (scdp->tstc()) {
+			while (((ch = scdp->getc()) != '\n') && (ch != '\r')) {
+				/* Test for backspace/delete */
+				if ((ch == '\b') || (ch == '\177')) {
+					if (cp != buf) {
+						cp--;
+						count--;
+						printf("\b \b");
+					}
+				/* Test for ^x/^u (and wipe the line) */
+				} else if ((ch == '\030') || (ch == '\025')) {
+					while (cp != buf) {
+						cp--;
+						count--;
+						printf("\b \b");
+					}
+				} else if (count < len) {
+						*cp++ = ch;
+						count++;
+						scdp->putc(ch);
+				}
+			}
+			break;  /* Exit 'timer' loop */
+		}
+		udelay(1000);  /* 1 msec */
+	} while (timer++ < timeout);
+	*cp = 0;
+}
+
+static void serial_close(void)
+{
+	struct serial_console_data *scdp = console_ops.data;
+
+	if (scdp->close)
+		scdp->close();
+}
+
+static void *serial_get_stdout_devp(void)
+{
+	void *devp;
+	char devtype[MAX_PROP_LEN];
+	char path[MAX_PATH_LEN];
+
+	devp = finddevice("/chosen");
+	if (devp == NULL)
+		goto err_out;
+
+	if (getprop(devp, "linux,stdout-path", path, MAX_PATH_LEN) > 0 ||
+		getprop(devp, "stdout-path", path, MAX_PATH_LEN) > 0) {
+		devp = finddevice(path);
+		if (devp == NULL)
+			goto err_out;
+
+		if ((getprop(devp, "device_type", devtype, sizeof(devtype)) > 0)
+				&& !strcmp(devtype, "serial"))
+			return devp;
+	}
+err_out:
+	return NULL;
+}
+
+static struct serial_console_data serial_cd;
+
+/* Node's "compatible" property determines which serial driver to use */
+int serial_console_init(void)
+{
+	void *devp;
+	int rc = -1;
+
+	devp = serial_get_stdout_devp();
+	if (devp == NULL)
+		goto err_out;
+
+	if (dt_is_compatible(devp, "ns16550") ||
+	    dt_is_compatible(devp, "pnpPNP,501"))
+		rc = ns16550_console_init(devp, &serial_cd);
+#ifdef CONFIG_CPM
+	else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
+	         dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
+	         dt_is_compatible(devp, "fsl,cpm2-scc-uart") ||
+	         dt_is_compatible(devp, "fsl,cpm2-smc-uart"))
+		rc = cpm_console_init(devp, &serial_cd);
+#endif
+#ifdef CONFIG_PPC_MPC52xx
+	else if (dt_is_compatible(devp, "fsl,mpc5200-psc-uart"))
+		rc = mpc5200_psc_console_init(devp, &serial_cd);
+#endif
+#ifdef CONFIG_PPC_POWERNV
+	else if (dt_is_compatible(devp, "ibm,opal-console-raw"))
+		rc = opal_console_init(devp, &serial_cd);
+#endif
+
+	/* Add other serial console driver calls here */
+
+	if (!rc) {
+		console_ops.open = serial_open;
+		console_ops.write = serial_write;
+		console_ops.close = serial_close;
+		console_ops.data = &serial_cd;
+
+		if (serial_cd.getc)
+			console_ops.edit_cmdline = serial_edit_cmdline;
+
+		return 0;
+	}
+err_out:
+	return -1;
+}