diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2026-08-24 08:46:03 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2026-08-24 08:46:03 -0700 |
| commit | cf9610f9116d55c5a66ef9f1faecacabd93a9322 (patch) | |
| tree | 757a3d280760c654767631cab5ad8af2d86d1848 /arch/powerpc/boot/ppcboot.h | |
| download | linux-stable-cf9610f9116d55c5a66ef9f1faecacabd93a9322.tar.gz linux-stable-cf9610f9116d55c5a66ef9f1faecacabd93a9322.zip | |
Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted
Pull pin control updates from Linus Walleij:
"Core changes:
- Use the non-blocking mux_state_try_select() in the generic MUX pin
control back-end
- Free pin maps on pinctrl_generic_to_map() failure in the core
helpers
New hardware pin control:
- Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
(this is for the low power audio, LPASS = Low Power Audio SubSystem
portions)
- Upboard support on top of the Intel pin controller
- Apple T6030 and T6031 support (just compatible strings)
- Samsung Exynos 8855 SoC
- Mediatek MT6858 SoC
- Rockchip RK3308B and RV1106 SoCs
- Airoha EN7523 and AN7563 SoCs
Improvements:
- Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable
- Qualcomm improvements on top of the Qualcomm PDC (power domain
controller) irqchip improvements from tglx:s tree
- Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups
- The NPCM8xx driver has been put into shape fixing many pin and
group definitions
- Some non-urgent Tegra 264 pin assignments are fixed up
- Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
pin assignments, missing features etc"
* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
pinctrl: meson: sync some modify from A4
pinctrl: meson: a4: Add input enable pin configuration
pinctrl: realtek: rtd1625: remove unused group name spdif_sel
pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
Revert "Merge branch 'ib-rsk7204' into devel"
pinctrl: rockchip: Add RV1106 pinctrl support
dt-bindings: pinctrl: rockchip: Add RV1106 compatible
pinctrl: rockchip: Decode drive strength in the get function
pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
pinctrl: airoha: add support of an7563 SoC
dt-bindings: pinctrl: airoha: add support of an7563 pin controller
pinctrl: airoha: try to find chip scu node by phandle first
pinctrl: airoha: add support of en7523 SoC
dt-bindings: pinctrl: airoha: add support of en7523 pin controller
pinctrl: airoha: an7583: add support for olt pinmux
pinctrl: airoha: an7583: add support for pon_alt pinmux
pinctrl: airoha: an7583: add support for npu_uart pinmux
dt-bindings: pinctrl: airoha: an7583: add missed features
...
Diffstat (limited to 'arch/powerpc/boot/ppcboot.h')
| -rw-r--r-- | arch/powerpc/boot/ppcboot.h | 95 |
1 files changed, 95 insertions, 0 deletions
diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h new file mode 100644 index 000000000..90c8f452f --- /dev/null +++ b/arch/powerpc/boot/ppcboot.h @@ -0,0 +1,95 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * This interface is used for compatibility with old U-boots *ONLY*. + * Please do not imitate or extend this. + */ + +/* + * (C) Copyright 2000, 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +#ifndef __PPCBOOT_H__ +#define __PPCBOOT_H__ + +/* + * Board information passed to kernel from PPCBoot + * + * include/asm-ppc/ppcboot.h + */ + +#include "types.h" + +typedef struct bd_info { + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ +#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\ + defined(TARGET_83xx) || defined(TARGET_86xx) + unsigned long bi_immr_base; /* base of IMMR register */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_mbar_base; /* base of internal registers */ +#endif + unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet address */ + unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ + unsigned long bi_intfreq; /* Internal Freq, in MHz */ + unsigned long bi_busfreq; /* Bus Freq, in MHz */ +#if defined(TARGET_CPM2) + unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ + unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ + unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ + unsigned long bi_vco; /* VCO Out from PLL, in MHz */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ + unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ +#endif + unsigned long bi_baudrate; /* Console Baudrate */ +#if defined(TARGET_4xx) + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */ + unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ + unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ + unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ +#endif +#if defined(TARGET_HYMOD) + hymod_conf_t bi_hymod_conf; /* hymod configuration information */ +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_44x) || \ + defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#define HAVE_ENET1ADDR +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ + defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) + /* third onboard ethernet ports */ + unsigned char bi_enet2addr[6]; +#define HAVE_ENET2ADDR +#endif +#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) + /* fourth onboard ethernet ports */ + unsigned char bi_enet3addr[6]; +#define HAVE_ENET3ADDR +#endif +#if defined(TARGET_4xx) + unsigned int bi_opbfreq; /* OB clock in Hz */ + int bi_iic_fast[2]; /* Use fast i2c mode */ +#endif +#if defined(TARGET_440GX) + int bi_phynum[4]; /* phy mapping */ + int bi_phymode[4]; /* phy mode */ +#endif +} bd_t; + +#define bi_tbfreq bi_intfreq + +#endif /* __PPCBOOT_H__ */ |
