Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 151 insertions, 0 deletions

diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c
new file mode 100644
index 000000000..dc603f3c1
--- /dev/null
+++ b/arch/powerpc/boot/mktree.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Makes a tree bootable image for IBM Evaluation boards.
+ * Basically, just take a zImage, skip the ELF header, and stuff
+ * a 32 byte header on the front.
+ *
+ * We use htonl, which is a network macro, to make sure we're doing
+ * The Right Thing on an LE machine.  It's non-obvious, but it should
+ * work on anything BSD'ish.
+ */
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <netinet/in.h>
+#ifdef __sun__
+#include <inttypes.h>
+#else
+#include <stdint.h>
+#endif
+
+/* This gets tacked on the front of the image.  There are also a few
+ * bytes allocated after the _start label used by the boot rom (see
+ * head.S for details).
+ */
+typedef struct boot_block {
+	uint32_t bb_magic;		/* 0x0052504F */
+	uint32_t bb_dest;		/* Target address of the image */
+	uint32_t bb_num_512blocks;	/* Size, rounded-up, in 512 byte blks */
+	uint32_t bb_debug_flag;	/* Run debugger or image after load */
+	uint32_t bb_entry_point;	/* The image address to start */
+	uint32_t bb_checksum;	/* 32 bit checksum including header */
+	uint32_t reserved[2];
+} boot_block_t;
+
+#define IMGBLK	512
+unsigned int	tmpbuf[IMGBLK / sizeof(unsigned int)];
+
+int main(int argc, char *argv[])
+{
+	int	in_fd, out_fd;
+	int	nblks, i;
+	unsigned int	cksum, *cp;
+	struct	stat	st;
+	boot_block_t	bt;
+
+	if (argc < 5) {
+		fprintf(stderr, "usage: %s <zImage-file> <boot-image> <load address> <entry point>\n",argv[0]);
+		exit(1);
+	}
+
+	if (stat(argv[1], &st) < 0) {
+		perror("stat");
+		exit(2);
+	}
+
+	nblks = (st.st_size + IMGBLK) / IMGBLK;
+
+	bt.bb_magic = htonl(0x0052504F);
+
+	/* If we have the optional entry point parameter, use it */
+	bt.bb_dest = htonl(strtoul(argv[3], NULL, 0));
+	bt.bb_entry_point = htonl(strtoul(argv[4], NULL, 0));
+
+	/* We know these from the linker command.
+	 * ...and then move it up into memory a little more so the
+	 * relocation can happen.
+	 */
+	bt.bb_num_512blocks = htonl(nblks);
+	bt.bb_debug_flag = 0;
+
+	bt.bb_checksum = 0;
+
+	/* To be neat and tidy :-).
+	*/
+	bt.reserved[0] = 0;
+	bt.reserved[1] = 0;
+
+	if ((in_fd = open(argv[1], O_RDONLY)) < 0) {
+		perror("zImage open");
+		exit(3);
+	}
+
+	if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) {
+		perror("bootfile open");
+		exit(3);
+	}
+
+	cksum = 0;
+	cp = (void *)&bt;
+	for (i = 0; i < sizeof(bt) / sizeof(unsigned int); i++)
+		cksum += *cp++;
+
+	/* Assume zImage is an ELF file, and skip the 64K header.
+	*/
+	if (read(in_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
+		fprintf(stderr, "%s is too small to be an ELF image\n",
+				argv[1]);
+		exit(4);
+	}
+
+	if (tmpbuf[0] != htonl(0x7f454c46)) {
+		fprintf(stderr, "%s is not an ELF image\n", argv[1]);
+		exit(4);
+	}
+
+	if (lseek(in_fd, (64 * 1024), SEEK_SET) < 0) {
+		fprintf(stderr, "%s failed to seek in ELF image\n", argv[1]);
+		exit(4);
+	}
+
+	nblks -= (64 * 1024) / IMGBLK;
+
+	/* And away we go......
+	*/
+	if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
+		perror("boot-image write");
+		exit(5);
+	}
+
+	while (nblks-- > 0) {
+		if (read(in_fd, tmpbuf, sizeof(tmpbuf)) < 0) {
+			perror("zImage read");
+			exit(5);
+		}
+		cp = tmpbuf;
+		for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
+			cksum += *cp++;
+		if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
+			perror("boot-image write");
+			exit(5);
+		}
+	}
+
+	/* rewrite the header with the computed checksum.
+	*/
+	bt.bb_checksum = htonl(cksum);
+	if (lseek(out_fd, 0, SEEK_SET) < 0) {
+		perror("rewrite seek");
+		exit(1);
+	}
+	if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
+		perror("boot-image rewrite");
+		exit(1);
+	}
+
+	exit(0);
+}