Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 284 insertions, 0 deletions

diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c
new file mode 100644
index 000000000..2c0e2a1ca
--- /dev/null
+++ b/arch/powerpc/boot/main.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) Paul Mackerras 1997.
+ *
+ * Updates for PPC64 by Todd Inglett, Dave Engebretsen & Peter Bergner.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "elf.h"
+#include "page.h"
+#include "string.h"
+#include "stdio.h"
+#include "ops.h"
+#include "reg.h"
+
+struct addr_range {
+	void *addr;
+	unsigned long size;
+};
+
+#undef DEBUG
+
+static struct addr_range prep_kernel(void)
+{
+	char elfheader[256];
+	unsigned char *vmlinuz_addr = (unsigned char *)_vmlinux_start;
+	unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start;
+	void *addr = 0;
+	struct elf_info ei;
+	long len;
+	int uncompressed_image = 0;
+
+	len = partial_decompress(vmlinuz_addr, vmlinuz_size,
+		elfheader, sizeof(elfheader), 0);
+	/* assume uncompressed data if -1 is returned */
+	if (len == -1) {
+		uncompressed_image = 1;
+		memcpy(elfheader, vmlinuz_addr, sizeof(elfheader));
+		printf("No valid compressed data found, assume uncompressed data\n\r");
+	}
+
+	if (!parse_elf64(elfheader, &ei) && !parse_elf32(elfheader, &ei))
+		fatal("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
+
+	if (platform_ops.image_hdr)
+		platform_ops.image_hdr(elfheader);
+
+	/* We need to alloc the memsize: gzip will expand the kernel
+	 * text/data, then possible rubbish we don't care about. But
+	 * the kernel bss must be claimed (it will be zero'd by the
+	 * kernel itself)
+	 */
+	printf("Allocating 0x%lx bytes for kernel...\n\r", ei.memsize);
+
+	if (platform_ops.vmlinux_alloc) {
+		addr = platform_ops.vmlinux_alloc(ei.memsize);
+	} else {
+		/*
+		 * Check if the kernel image (without bss) would overwrite the
+		 * bootwrapper. The device tree has been moved in fdt_init()
+		 * to an area allocated with malloc() (somewhere past _end).
+		 */
+		if ((unsigned long)_start < ei.loadsize)
+			fatal("Insufficient memory for kernel at address 0!"
+			       " (_start=%p, uncompressed size=%08lx)\n\r",
+			       _start, ei.loadsize);
+
+		if ((unsigned long)_end < ei.memsize)
+			fatal("The final kernel image would overwrite the "
+					"device tree\n\r");
+	}
+
+	if (uncompressed_image) {
+		memcpy(addr, vmlinuz_addr + ei.elfoffset, ei.loadsize);
+		printf("0x%lx bytes of uncompressed data copied\n\r",
+		       ei.loadsize);
+		goto out;
+	}
+
+	/* Finally, decompress the kernel */
+	printf("Decompressing (0x%p <- 0x%p:0x%p)...\n\r", addr,
+	       vmlinuz_addr, vmlinuz_addr+vmlinuz_size);
+
+	len = partial_decompress(vmlinuz_addr, vmlinuz_size,
+		addr, ei.loadsize, ei.elfoffset);
+
+	if (len < 0)
+		fatal("Decompression failed with error code %ld\n\r", len);
+
+	if (len != ei.loadsize)
+		 fatal("Decompression error: got 0x%lx bytes, expected 0x%lx.\n\r",
+			 len, ei.loadsize);
+
+	printf("Done! Decompressed 0x%lx bytes\n\r", len);
+out:
+	flush_cache(addr, ei.loadsize);
+
+	return (struct addr_range){addr, ei.memsize};
+}
+
+static struct addr_range prep_initrd(struct addr_range vmlinux, void *chosen,
+				     unsigned long initrd_addr,
+				     unsigned long initrd_size)
+{
+	/* If we have an image attached to us, it overrides anything
+	 * supplied by the loader. */
+	if (&_initrd_end > &_initrd_start) {
+		printf("Attached initrd image at 0x%p-0x%p\n\r",
+		       _initrd_start, _initrd_end);
+		initrd_addr = (unsigned long)_initrd_start;
+		initrd_size = _initrd_end - _initrd_start;
+	} else if (initrd_size > 0) {
+		printf("Using loader supplied ramdisk at 0x%lx-0x%lx\n\r",
+		       initrd_addr, initrd_addr + initrd_size);
+	}
+
+	/* If there's no initrd at all, we're done */
+	if (! initrd_size)
+		return (struct addr_range){0, 0};
+
+	/*
+	 * If the initrd is too low it will be clobbered when the
+	 * kernel relocates to its final location.  In this case,
+	 * allocate a safer place and move it.
+	 */
+	if (initrd_addr < vmlinux.size) {
+		void *old_addr = (void *)initrd_addr;
+
+		printf("Allocating 0x%lx bytes for initrd ...\n\r",
+		       initrd_size);
+		initrd_addr = (unsigned long)malloc(initrd_size);
+		if (! initrd_addr)
+			fatal("Can't allocate memory for initial "
+			       "ramdisk !\n\r");
+		printf("Relocating initrd 0x%lx <- 0x%p (0x%lx bytes)\n\r",
+		       initrd_addr, old_addr, initrd_size);
+		memmove((void *)initrd_addr, old_addr, initrd_size);
+	}
+
+	printf("initrd head: 0x%lx\n\r", *((unsigned long *)initrd_addr));
+
+	/* Tell the kernel initrd address via device tree */
+	setprop_val(chosen, "linux,initrd-start", (u32)(initrd_addr));
+	setprop_val(chosen, "linux,initrd-end", (u32)(initrd_addr+initrd_size));
+
+	return (struct addr_range){(void *)initrd_addr, initrd_size};
+}
+
+#ifdef __powerpc64__
+static void prep_esm_blob(struct addr_range vmlinux, void *chosen)
+{
+	unsigned long esm_blob_addr, esm_blob_size;
+
+	/* Do we have an ESM (Enter Secure Mode) blob? */
+	if (&_esm_blob_end <= &_esm_blob_start)
+		return;
+
+	printf("Attached ESM blob at 0x%p-0x%p\n\r",
+	       _esm_blob_start, _esm_blob_end);
+	esm_blob_addr = (unsigned long)_esm_blob_start;
+	esm_blob_size = _esm_blob_end - _esm_blob_start;
+
+	/*
+	 * If the ESM blob is too low it will be clobbered when the
+	 * kernel relocates to its final location.  In this case,
+	 * allocate a safer place and move it.
+	 */
+	if (esm_blob_addr < vmlinux.size) {
+		void *old_addr = (void *)esm_blob_addr;
+
+		printf("Allocating 0x%lx bytes for esm_blob ...\n\r",
+		       esm_blob_size);
+		esm_blob_addr = (unsigned long)malloc(esm_blob_size);
+		if (!esm_blob_addr)
+			fatal("Can't allocate memory for ESM blob !\n\r");
+		printf("Relocating ESM blob 0x%lx <- 0x%p (0x%lx bytes)\n\r",
+		       esm_blob_addr, old_addr, esm_blob_size);
+		memmove((void *)esm_blob_addr, old_addr, esm_blob_size);
+	}
+
+	/* Tell the kernel ESM blob address via device tree. */
+	setprop_val(chosen, "linux,esm-blob-start", (u32)(esm_blob_addr));
+	setprop_val(chosen, "linux,esm-blob-end", (u32)(esm_blob_addr + esm_blob_size));
+}
+#else
+static inline void prep_esm_blob(struct addr_range vmlinux, void *chosen) { }
+#endif
+
+/* A buffer that may be edited by tools operating on a zImage binary so as to
+ * edit the command line passed to vmlinux (by setting /chosen/bootargs).
+ * The buffer is put in its own section so that tools may locate it easier.
+ */
+static char cmdline[BOOT_COMMAND_LINE_SIZE]
+	__attribute__((__section__("__builtin_cmdline")));
+
+static void prep_cmdline(void *chosen)
+{
+	unsigned int getline_timeout = 5000;
+	int v;
+	int n;
+
+	/* Wait-for-input time */
+	n = getprop(chosen, "linux,cmdline-timeout", &v, sizeof(v));
+	if (n == sizeof(v))
+		getline_timeout = v;
+
+	if (cmdline[0] == '\0')
+		getprop(chosen, "bootargs", cmdline, BOOT_COMMAND_LINE_SIZE-1);
+
+	printf("\n\rLinux/PowerPC load: %s", cmdline);
+
+	/* If possible, edit the command line */
+	if (console_ops.edit_cmdline && getline_timeout)
+		console_ops.edit_cmdline(cmdline, BOOT_COMMAND_LINE_SIZE, getline_timeout);
+
+	printf("\n\r");
+
+	/* Put the command line back into the devtree for the kernel */
+	setprop_str(chosen, "bootargs", cmdline);
+}
+
+struct platform_ops platform_ops;
+struct dt_ops dt_ops;
+struct console_ops console_ops;
+struct loader_info loader_info;
+
+void start(void)
+{
+	struct addr_range vmlinux, initrd;
+	kernel_entry_t kentry;
+	unsigned long ft_addr = 0;
+	void *chosen;
+
+	/* Do this first, because malloc() could clobber the loader's
+	 * command line.  Only use the loader command line if a
+	 * built-in command line wasn't set by an external tool */
+	if ((loader_info.cmdline_len > 0) && (cmdline[0] == '\0'))
+		memmove(cmdline, loader_info.cmdline,
+			min(loader_info.cmdline_len, BOOT_COMMAND_LINE_SIZE-1));
+
+	if (console_ops.open && (console_ops.open() < 0))
+		exit();
+	if (platform_ops.fixups)
+		platform_ops.fixups();
+
+	printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r",
+	       _start, get_sp());
+
+	/* Ensure that the device tree has a /chosen node */
+	chosen = finddevice("/chosen");
+	if (!chosen)
+		chosen = create_node(NULL, "chosen");
+
+	vmlinux = prep_kernel();
+	initrd = prep_initrd(vmlinux, chosen,
+			     loader_info.initrd_addr, loader_info.initrd_size);
+	prep_esm_blob(vmlinux, chosen);
+	prep_cmdline(chosen);
+
+	printf("Finalizing device tree...");
+	if (dt_ops.finalize)
+		ft_addr = dt_ops.finalize();
+	if (ft_addr)
+		printf(" flat tree at 0x%lx\n\r", ft_addr);
+	else
+		printf(" using OF tree (promptr=%p)\n\r", loader_info.promptr);
+
+	if (console_ops.close)
+		console_ops.close();
+
+	kentry = (kernel_entry_t) vmlinux.addr;
+	if (ft_addr) {
+		if(platform_ops.kentry)
+			platform_ops.kentry(ft_addr, vmlinux.addr);
+		else
+			kentry(ft_addr, 0, NULL);
+	}
+	else
+		kentry((unsigned long)initrd.addr, initrd.size,
+		       loader_info.promptr);
+
+	/* console closed so printf in fatal below may not work */
+	fatal("Error: Linux kernel returned to zImage boot wrapper!\n\r");
+}