drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

370 files changed, 67915 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile
new file mode 100644
index 000000000..1e61a951c
--- /dev/null
+++ b/arch/powerpc/boot/dts/Makefile
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+
+subdir-y += fsl
+
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
+
+# PPC44x platforms
+dtb-$(CONFIG_PPC44x_SIMPLE) += arches.dtb bamboo.dtb bluestone.dtb glacier.dtb
+dtb-$(CONFIG_PPC44x_SIMPLE) += eiger.dtb katmai.dtb rainier.dtb redwood.dtb
+dtb-$(CONFIG_PPC44x_SIMPLE) += sequoia.dtb taishan.dtb yosemite.dtb icon.dtb
+dtb-$(CONFIG_EBONY) += ebony.dtb
+dtb-$(CONFIG_SAM440EP) += sam440ep.dtb
+dtb-$(CONFIG_WARP) += warp.dtb
+dtb-$(CONFIG_ISS4xx) += iss4xx.dtb iss4xx-mpic.dtb
+dtb-$(CONFIG_CANYONLANDS) += canyonlands.dtb
+dtb-$(CONFIG_CURRITUCK) += currituck.dtb
+dtb-$(CONFIG_AKEBONO) += akebono.dtb
+dtb-$(CONFIG_FSP2) += fsp2.dtb
+
+# Embedded 6xx platforms
+dtb-$(CONFIG_LINKSTATION) += kuroboxHG.dtb kuroboxHD.dtb
+dtb-$(CONFIG_STORCENTER) += storcenter.dtb
+dtb-$(CONFIG_PPC_HOLLY) += holly.dtb
+dtb-$(CONFIG_GAMECUBE) += gamecube.dtb
+dtb-$(CONFIG_WII) += wii.dtb
+dtb-$(CONFIG_MVME5100) += mvme5100.dtb
+
+# MPC8xx platforms
+dtb-$(CONFIG_MPC885ADS) += mpc885ads.dtb
+dtb-$(CONFIG_MPC86XADS) += mpc866ads.dtb
+dtb-$(CONFIG_PPC_EP88XC) += ep88xc.dtb
+dtb-$(CONFIG_PPC_ADDER875) += adder875-redboot.dtb adder875-uboot.dtb
+dtb-$(CONFIG_TQM8XX) += tqm8xx.dtb
+
+# MPC512x platforms
+dtb-$(CONFIG_MPC5121_ADS) += mpc5121ads.dtb
+dtb-$(CONFIG_MPC512x_GENERIC) += mpc5125twr.dtb ac14xx.dts
+dtb-$(CONFIG_PDM360NG) += pdm360ng.dtb
+
+# MPC5200 platforms
+dtb-$(CONFIG_PPC_MPC5200_SIMPLE) += a3m071.dtb a4m072.dtb charon.dtb cm5200.dtb
+dtb-$(CONFIG_PPC_MPC5200_SIMPLE) += digsy_mtc.dtb motionpro.dtb mucmc52.dtb
+dtb-$(CONFIG_PPC_MPC5200_SIMPLE) += o2d.dtb o2d300.dtb o2dnt2.dtb o2i.dtb
+dtb-$(CONFIG_PPC_MPC5200_SIMPLE) += o2mnt.dtb o3dnt.dtb pcm030.dtb pcm032.dtb
+dtb-$(CONFIG_PPC_MPC5200_SIMPLE) += tqm5200.dtb uc101.dtb
+dtb-$(CONFIG_PPC_LITE5200) += lite5200.dtb lite5200b.dtb
+dtb-$(CONFIG_PPC_MEDIA5200) += media5200.dtb
+
+# MPC82xx platforms
+dtb-$(CONFIG_EP8248E) += ep8248e.dtb
+dtb-$(CONFIG_MGCOGE) += mgcoge.dtb
+
+# MPC83xx platforms
+dtb-$(CONFIG_MPC830x_RDB) += mpc8308rdb.dtb mpc8308_p1m.dtb
+dtb-$(CONFIG_MPC831x_RDB) += mpc8313erdb.dtb mpc8315erdb.dtb
+dtb-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.dtb
+dtb-$(CONFIG_MPC834x_ITX) += mpc8349emitx.dtb mpc8349emitxgp.dtb
+dtb-$(CONFIG_ASP834x) += asp834x-redboot.dtb
+dtb-$(CONFIG_MPC836x_RDK) += mpc836x_rdk.dtb
+dtb-$(CONFIG_KMETER1) += kmeter1.dtb
+dtb-$(CONFIG_MPC837x_RDB) += mpc8377_rdb.dtb mpc8378_rdb.dtb mpc8379_rdb.dtb
+dtb-$(CONFIG_MPC837x_RDB) += mpc8377_wlan.dtb
+
+# MPC85xx platforms
+dtb-$(CONFIG_STX_GP3) += stx_gp3_8560.dtb stxssa8555.dtb
+dtb-$(CONFIG_TQM85xx) += tqm8540.dtb tqm8541.dtb tqm8548.dtb
+dtb-$(CONFIG_TQM85xx) += tqm8548-bigflash.dtb tqm8555.dtb tqm8560.dtb
+dtb-$(CONFIG_SOCRATES) += socrates.dtb
+dtb-$(CONFIG_KSI8560) += ksi8560.dtb
+dtb-$(CONFIG_XES_MPC85xx) += xcalibur1501.dtb xpedite5200.dtb
+dtb-$(CONFIG_XES_MPC85xx) += xpedite5200_xmon.dtb xpedite5301.dtb
+dtb-$(CONFIG_XES_MPC85xx) += xpedite5330.dtb xpedite5370.dtb
+dtb-$(CONFIG_PPC_P2020) += turris1x.dtb
+
+# Misc. platforms
+dtb-$(CONFIG_PPC_MICROWATT) += microwatt.dtb
+dtb-$(CONFIG_AMIGAONE) += amigaone.dtb
+dtb-$(CONFIG_PPC_PS3) += ps3.dtb
diff --git a/arch/powerpc/boot/dts/a3m071.dts b/arch/powerpc/boot/dts/a3m071.dts
new file mode 100644
index 000000000..034cfd8aa
--- /dev/null
+++ b/arch/powerpc/boot/dts/a3m071.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * a3m071 board Device Tree Source
+ *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+
+/ {
+	model = "anonymous,a3m071";
+	compatible = "anonymous,a3m071";
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>; /* From boot loader */
+		system-frequency = <0>; /* From boot loader */
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		usb: usb@1000 {
+			status = "disabled";
+		};
+
+		psc@2000 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc@2200 {
+			status = "disabled";
+		};
+
+		psc@2400 {
+			status = "disabled";
+		};
+
+		psc@2600 {
+			status = "disabled";
+		};
+
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@3 {
+				reg = <0x03>;
+			};
+		};
+
+		ata@3a00 {
+			status = "disabled";
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			status = "disabled";
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe9000000 0x00080000
+			  5 0 0xe8000000 0x00010000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x0 0x02000000>;
+			compatible = "cfi-flash";
+			bank-width = <2>;
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "env";
+				reg = <0x00040000 0x00020000>;
+			};
+			partition@60000 {
+				label = "dtb";
+				reg = <0x00060000 0x00020000>;
+			};
+			partition@80000 {
+				label = "kernel";
+				reg = <0x00080000 0x00500000>;
+			};
+			partition@580000 {
+				label = "root";
+				reg = <0x00580000 0x00A80000>;
+			};
+		};
+
+		fpga@3,0 {
+			compatible = "anonymous,a3m071-fpga";
+			reg = <3 0x0 0x00080000
+			       5 0x0 0x00010000>;
+			interrupts = <0 0 3>;  /* level low */
+		};
+	};
+
+	pci@f0000d00 {
+		status = "disabled";
+	};
+};
diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
new file mode 100644
index 000000000..d4270a2ec
--- /dev/null
+++ b/arch/powerpc/boot/dts/a4m072.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * a4m072 board Device Tree Source
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+
+/ {
+	model = "anonymous,a4m072";
+	compatible = "anonymous,a4m072";
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>; /* From boot loader */
+		system-frequency = <0>; /* From boot loader */
+
+		cdm@200 {
+			fsl,init-ext-48mhz-en = <0x0>;
+			fsl,init-fd-enable = <0x01>;
+			fsl,init-fd-counters = <0x3333>;
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		psc@2000 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc@2200 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc@2400 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc@2600 {
+			status = "disabled";
+		};
+
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@1f {
+				reg = <0x1f>;
+				interrupts = <1 2 0>; /* IRQ 2 active low */
+			};
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			hwmon@2e {
+				compatible = "nsc,lm87";
+				reg = <0x2e>;
+			};
+			rtc@51 {
+				compatible = "nxp,rtc8564";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfe000000 0x02000000
+			  1 0 0x62000000 0x00400000
+			  2 0 0x64000000 0x00200000
+			  3 0 0x66000000 0x01000000
+			  6 0 0x68000000 0x01000000
+			  7 0 0x6a000000 0x00000004>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+		sram0@1,0 {
+			compatible = "mtd-ram";
+			reg = <1 0x00000 0x00400000>;
+			bank-width = <2>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				 /* IDSEL 0x16 */
+				 0xc000 0 0 1 &mpc5200_pic 1 3 3
+				 0xc000 0 0 2 &mpc5200_pic 1 3 3
+				 0xc000 0 0 3 &mpc5200_pic 1 3 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
+		clock-frequency = <0>; /* From boot loader */
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts
new file mode 100644
index 000000000..5d8877e1f
--- /dev/null
+++ b/arch/powerpc/boot/dts/ac14xx.dts
@@ -0,0 +1,395 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree Source for the MPC5121e based ac14xx board
+ *
+ * Copyright 2012 Anatolij Gustschin <agust@denx.de>
+ */
+
+
+#include "mpc5121.dtsi"
+
+/ {
+	model = "ac14xx";
+	compatible = "ifm,ac14xx", "fsl,mpc5121";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial7;
+		spi4 = &spi4;
+		spi5 = &spi5;
+	};
+
+	cpus {
+		PowerPC,5121@0 {
+			timebase-frequency = <40000000>;	/*  40 MHz (csb/4) */
+			bus-frequency = <160000000>;		/* 160 MHz csb bus */
+			clock-frequency = <400000000>;		/* 400 MHz ppc core */
+		};
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;			/* 256MB at 0 */
+	};
+
+	nfc@40000000 {
+		status = "disabled";
+	};
+
+	localbus@80000020 {
+		ranges = <0x0 0x0 0xfc000000 0x04000000	/* CS0: NOR flash */
+			  0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */
+			  0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */
+			  0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */
+			  0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */
+			  0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0x00000000 0x04000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			device-width = <2>;
+
+			partition@0 {
+				label = "dtb-kernel-production";
+				reg = <0x00000000 0x00400000>;
+			};
+			partition@1 {
+				label = "filesystem-production";
+				reg = <0x00400000 0x03400000>;
+			};
+
+			partition@2 {
+				label = "recovery";
+				reg = <0x03800000 0x00700000>;
+			};
+
+			partition@3 {
+				label = "uboot-code";
+				reg = <0x03f00000 0x00040000>;
+			};
+			partition@4 {
+				label = "uboot-env1";
+				reg = <0x03f40000 0x00020000>;
+			};
+			partition@5 {
+				label = "uboot-env2";
+				reg = <0x03f60000 0x00020000>;
+			};
+		};
+
+		fram@1,0 {
+			compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq";
+			reg = <1 0x00000000 0x00010000>;
+		};
+
+		asi@2,0 {
+			/* masters mapping: CS, CS offset, size */
+			reg = <2 0x00000000 0x00080000
+			       6 0x00000000 0x00080000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ifm,ac14xx-asi-fpga";
+			gpios = <
+				&gpio_pic 26 0	/* prog */
+				&gpio_pic 27 0	/* done */
+				&gpio_pic 10 0	/* reset */
+				>;
+
+			master@1 {
+				interrupts = <20 0x2>;
+				interrupt-parent = <&gpio_pic>;
+				chipselect = <2 0x00009000 0x00009100>;
+				label = "AS-i master 1";
+			};
+
+			master@2 {
+				interrupts = <21 0x2>;
+				interrupt-parent = <&gpio_pic>;
+				chipselect = <6 0x00009000 0x00009100>;
+				label = "AS-i master 2";
+			};
+		};
+
+		netx@3,0 {
+			compatible = "ifm,netx";
+			reg = <0x3 0x00000000 0x00020000>;
+			chipselect = <3 0x00101140 0x00203100>;
+			interrupts = <17 0x8>;
+			gpios = <&gpio_pic 15 0>;
+		};
+
+		safety@5,0 {
+			compatible = "ifm,safety";
+			reg = <0x5 0x00000000 0x00010000>;
+			chipselect = <5 0x00009000 0x00009100>;
+			interrupts = <22 0x2>;
+			interrupt-parent = <&gpio_pic>;
+			gpios = <
+				&gpio_pic 12 0	/* prog */
+				&gpio_pic 11 0	/* done */
+				>;
+		};
+	};
+
+	clocks {
+		osc {
+			clock-frequency = <25000000>;
+		};
+	};
+
+	soc@80000000 {
+		bus-frequency = <80000000>;	/* 80 MHz ips bus */
+
+		clock@f00 {
+			compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
+		};
+
+		/*
+		 * GPIO PIC:
+		 * interrupts cell = <pin nr, sense>
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		gpio_pic: gpio@1100 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sdhc@1500 {
+			cd-gpios = <&gpio_pic 23 0>;	/* card detect */
+			wp-gpios = <&gpio_pic 24 0>;	/* write protect */
+			wp-inverted;			/* WP active high */
+		};
+
+		i2c@1700 {
+			/* use Fast-mode */
+			clock-frequency = <400000>;
+
+			at24@30 {
+				compatible = "atmel,24c01";
+				reg = <0x30>;
+			};
+
+			at24@31 {
+				compatible = "atmel,24c01";
+				reg = <0x31>;
+			};
+
+			temp@48 {
+				compatible = "ad,ad7414";
+				reg = <0x48>;
+			};
+
+			at24@50 {
+				compatible = "atmel,24c01";
+				reg = <0x50>;
+			};
+
+			at24@51 {
+				compatible = "atmel,24c01";
+				reg = <0x51>;
+			};
+
+			at24@52 {
+				compatible = "atmel,24c01";
+				reg = <0x52>;
+			};
+
+			at24@53 {
+				compatible = "atmel,24c01";
+				reg = <0x53>;
+			};
+
+			at24@54 {
+				compatible = "atmel,24c01";
+				reg = <0x54>;
+			};
+
+			at24@55 {
+				compatible = "atmel,24c01";
+				reg = <0x55>;
+			};
+
+			at24@56 {
+				compatible = "atmel,24c01";
+				reg = <0x56>;
+			};
+
+			at24@57 {
+				compatible = "atmel,24c01";
+				reg = <0x57>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00";
+				reg = <0x68>;
+			};
+		};
+
+		axe_pic: axe-base@2000 {
+			compatible = "fsl,mpc5121-axe-base";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		axe-app {
+			compatible = "fsl,mpc5121-axe-app";
+			interrupt-parent = <&axe_pic>;
+			interrupts = <
+					/* soft interrupts */
+					0 0x0	1 0x0	2 0x0	3 0x0
+					4 0x0	5 0x0	6 0x0	7 0x0
+					/* fifo interrupts */
+					8 0x0	9 0x0	10 0x0	11 0x0
+				>;
+		};
+
+		display@2100 {
+			edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00
+				0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27
+				1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01
+				01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04
+				21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F
+				3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45
+				54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10
+				00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5];
+		};
+
+		can@2300 {
+			status = "disabled";
+		};
+
+		can@2380 {
+			status = "disabled";
+		};
+
+		viu@2400 {
+			status = "disabled";
+		};
+
+		mdio@2800 {
+			phy0: ethernet-phy@1f {
+				compatible = "smsc,lan8700";
+				reg = <0x1f>;
+			};
+		};
+
+		enet: ethernet@2800 {
+			phy-handle = <&phy0>;
+		};
+
+		usb@3000 {
+			status = "disabled";
+		};
+
+		usb@4000 {
+			status = "disabled";
+		};
+
+		/* PSC3 serial port A, aka ttyPSC0 */
+		serial0: psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			fsl,rx-fifo-size = <512>;
+			fsl,tx-fifo-size = <512>;
+		};
+
+		/* PSC4 in SPI mode */
+		spi4: psc@11400 {
+			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+			fsl,rx-fifo-size = <768>;
+			fsl,tx-fifo-size = <768>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <1>;
+			cs-gpios = <&gpio_pic 25 0>;
+
+			flash: m25p128@0 {
+				compatible = "st,m25p128";
+				spi-max-frequency = <20000000>;
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "spi-flash0";
+					reg = <0x00000000 0x01000000>;
+				};
+			};
+		};
+
+		/* PSC5 in SPI mode */
+		spi5: psc@11500 {
+			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+			fsl,mode = "spi-master";
+			fsl,rx-fifo-size = <128>;
+			fsl,tx-fifo-size = <128>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lcd@0 {
+				compatible = "ilitek,ili922x";
+				reg = <0>;
+				spi-max-frequency = <100000>;
+				spi-cpol;
+				spi-cpha;
+			};
+		};
+
+		/* PSC7 serial port C, aka ttyPSC2 */
+		serial7: psc@11700 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			fsl,rx-fifo-size = <512>;
+			fsl,tx-fifo-size = <512>;
+		};
+
+		matrix_keypad@0 {
+			compatible = "gpio-matrix-keypad";
+			debounce-delay-ms = <5>;
+			col-scan-delay-us = <1>;
+			gpio-activelow;
+			col-gpios-binary;
+			col-switch-delay-ms = <200>;
+
+			col-gpios = <&gpio_pic 1 0>;	/* pin1 */
+
+			row-gpios = <&gpio_pic 2 0	/* pin2 */
+				     &gpio_pic 3 0	/* pin3 */
+				     &gpio_pic 4 0>;	/* pin4 */
+
+			linux,keymap = <0x0000006e	/* FN LEFT */
+					0x01000067	/* UP */
+					0x02000066	/* FN RIGHT */
+					0x00010069	/* LEFT */
+					0x0101006a	/* DOWN */
+					0x0201006c>;	/* RIGHT */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		backlight {
+			label = "backlight";
+			gpios = <&gpio_pic 0 0>;
+			default-state = "keep";
+		};
+		green {
+			label = "green";
+			gpios = <&gpio_pic 18 0>;
+			default-state = "keep";
+		};
+		red {
+			label = "red";
+			gpios = <&gpio_pic 19 0>;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/adder875-redboot.dts b/arch/powerpc/boot/dts/adder875-redboot.dts
new file mode 100644
index 000000000..b51c97abf
--- /dev/null
+++ b/arch/powerpc/boot/dts/adder875-redboot.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree Source for MPC885 ADS running RedBoot
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+/ {
+	model = "Analogue & Micro Adder MPC875";
+	compatible = "analogue-and-micro,adder875";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		console = &console;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,875@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x01000000>;
+	};
+
+	localbus@fa200100 {
+		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
+		             "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xfa200100 0x40>;
+
+		ranges = <
+			0 0 0xfe000000 0x00800000
+			2 0 0xfa100000 0x00008000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x800000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	soc@fa200000 {
+		compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfa200000 0x00004000>;
+
+		// Temporary until code stops depending on it.
+		device_type = "soc";
+
+		// Temporary until get_immrbase() is fixed.
+		reg = <0xfa200000 0x4000>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			PHY0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			PHY1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		eth0: ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc875-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY0>;
+			linux,network-index = <0>;
+		};
+
+		eth1: ethernet@1e00 {
+			device_type = "network";
+			compatible = "fsl,mpc875-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0x1e00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <7 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY1>;
+			linux,network-index = <1>;
+		};
+
+		PIC: interrupt-controller@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0 0x24>;
+			compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
+			interrupts = <0>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+			reg = <0x9c0 0x40>;
+			ranges;
+
+			muram {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x1c00>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc875-brg",
+				             "fsl,cpm1-brg",
+				             "fsl,cpm-brg";
+				clock-frequency = <50000000>;
+				reg = <0x9f0 0x10>;
+			};
+
+			CPM_PIC: interrupt-controller@930 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc875-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+			console: serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc875-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x0090>;
+				current-speed = <115200>;
+			};
+		};
+	};
+
+	chosen {
+		stdout-path = &console;
+	};
+};
diff --git a/arch/powerpc/boot/dts/adder875-uboot.dts b/arch/powerpc/boot/dts/adder875-uboot.dts
new file mode 100644
index 000000000..ec776103f
--- /dev/null
+++ b/arch/powerpc/boot/dts/adder875-uboot.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree Source for MPC885 ADS running U-Boot
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+/ {
+	model = "Analogue & Micro Adder MPC875";
+	compatible = "analogue-and-micro,adder875";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		console = &console;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,875@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x01000000>;
+	};
+
+	localbus@ff000100 {
+		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
+		             "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xff000100 0x40>;
+
+		ranges = <
+			0 0 0xfe000000 0x01000000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x800000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	soc@ff000000 {
+		compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff000000 0x00004000>;
+
+		// Temporary until code stops depending on it.
+		device_type = "soc";
+
+		// Temporary until get_immrbase() is fixed.
+		reg = <0xff000000 0x4000>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			PHY0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			PHY1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		eth0: ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc875-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY0>;
+			linux,network-index = <0>;
+		};
+
+		eth1: ethernet@1e00 {
+			device_type = "network";
+			compatible = "fsl,mpc875-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0x1e00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <7 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY1>;
+			linux,network-index = <1>;
+		};
+
+		PIC: interrupt-controller@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0 0x24>;
+			compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
+			interrupts = <0>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+			reg = <0x9c0 0x40>;
+			ranges;
+
+			muram {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x1c00>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc875-brg",
+				             "fsl,cpm1-brg",
+				             "fsl,cpm-brg";
+				clock-frequency = <50000000>;
+				reg = <0x9f0 0x10>;
+			};
+
+			CPM_PIC: interrupt-controller@930 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc875-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+			console: serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc875-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x0090>;
+				current-speed = <115200>;
+			};
+		};
+	};
+
+	chosen {
+		stdout-path = &console;
+	};
+};
diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts
new file mode 100644
index 000000000..343326c30
--- /dev/null
+++ b/arch/powerpc/boot/dts/akebono.dts
@@ -0,0 +1,415 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;	// spin table
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "ibm,akebono";
+	compatible = "ibm,akebono", "ibm,476gtr";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <0>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "okay";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <1>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x01f00000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00040000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		single-cpu-affinity;
+	};
+
+	plb {
+		compatible = "ibm,plb6";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clock-frequency = <200000000>; // 200Mhz
+
+		HSTA0: hsta@310000e0000 {
+			compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi";
+			reg = <0x310 0x000e0000 0x0 0xf0>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <108 0
+				      109 0
+				      110 0
+				      111 0
+				      112 0
+				      113 0
+				      114 0
+				      115 0
+				      116 0
+				      117 0
+				      118 0
+				      119 0
+				      120 0
+				      121 0
+				      122 0
+				      123 0>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-476gtr", "ibm,mcmal2";
+			dcr-reg = <0xc0000000 0x062>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <	/*TXEOB*/ 77 0x4
+					/*RXEOB*/ 78 0x4
+					/*SERR*/  76 0x4
+					/*TXDE*/  79 0x4
+					/*RXDE*/  80 0x4>;
+		};
+
+		SATA0: sata@30000010000 {
+			compatible = "ibm,476gtr-ahci";
+			reg = <0x300 0x00010000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <93 2>;
+		};
+
+		EHCI0: usb@30010000000 {
+			compatible = "ibm,476gtr-ehci", "generic-ehci";
+			reg = <0x300 0x10000000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <85 2>;
+		};
+
+		SD0: sd@30000000000 {
+			compatible = "ibm,476gtr-sdhci", "generic-sdhci";
+			reg = <0x300 0x00000000 0x0 0x10000>;
+			interrupts = <91 2>;
+			interrupt-parent = <&MPIC>;
+		};
+
+		OHCI0: usb@30010010000 {
+			compatible = "ibm,476gtr-ohci", "generic-ohci";
+			reg = <0x300 0x10010000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <89 1>;
+			};
+
+		OHCI1: usb@30010020000 {
+			compatible = "ibm,476gtr-ohci", "generic-ohci";
+			reg = <0x300 0x10020000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <88 1>;
+			};
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full
+			 * 32-bit range
+			 */
+			ranges = <0x00000000 0x0000033f 0x00000000 0x80000000
+				  0x80000000 0x0000033f 0x80000000 0x80000000>;
+			clock-frequency = <100000000>;
+
+			RGMII0: emac-rgmii-wol@50004 {
+				compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol";
+				reg = <0x50004 0x00000008>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@30000 {
+				device_type = "network";
+				compatible = "ibm,emac-476gtr", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &MPIC 81 0x4
+						 /*Wake*/   0x1 &MPIC 82 0x4>;
+				reg = <0x30000 0x78>;
+
+				/* local-mac-address will normally be added by
+				 * the wrapper. If your device doesn't support
+				 * passing data to the wrapper (in the form
+				 * local-mac-addr=<hwaddr>) then you will need
+				 * to set it manually here. */
+				//local-mac-address = [000000000000];
+
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-wol-device = <&RGMII0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			UART0: serial@10000 {
+				device_type = "serial";
+				compatible = "ns16750", "ns16550";
+				reg = <0x10000 0x00000008>;
+				virtual-reg = <0xe8010000>;
+				clock-frequency = <1851851>;
+				current-speed = <38400>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <39 2>;
+			};
+
+			IIC0: i2c@0 {
+				compatible = "ibm,iic-476gtr", "ibm,iic";
+				reg = <0x0 0x00000020>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <37 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "st,m41t80", "m41st85";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@100 {
+				compatible = "ibm,iic-476gtr", "ibm,iic";
+				reg = <0x100 0x00000020>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <38 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				avr@58 {
+					compatible = "ibm,akebono-avr";
+					reg = <0x58>;
+				};
+			};
+
+			FPGA0: fpga@ebc00000 {
+				compatible = "ibm,akebono-fpga";
+				reg = <0xebc00000 0x8>;
+			};
+		};
+
+		PCIE0: pcie@10100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x00000101 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000100 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xc0 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000140 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>;
+		};
+
+		PCIE1: pcie@20100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x00000201 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000200 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x100 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000240 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>;
+		};
+
+		PCIE2: pcie@18100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x00000181 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000180 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xe0 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000001c0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>;
+		};
+
+		PCIE3: pcie@28100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x3>; /* port number */
+			reg = <0x00000281 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000280 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x120 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000002c0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>;
+		};
+	};
+
+	chosen {
+		stdout-path = &UART0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
new file mode 100644
index 000000000..5c68db36d
--- /dev/null
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AmigaOne Device Tree Source
+ *
+ * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net)
+ */
+
+/dts-v1/;
+
+/ {
+	model = "AmigaOne";
+	compatible = "eyetech,amigaone";
+	coherency-off;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	// 33.3 MHz, from U-boot
+			clock-frequency = <0>;		// From U-boot
+			bus-frequency = <0>;		// From U-boot
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;				// From U-boot
+	};
+
+	pci@80000000 {
+		device_type = "pci";
+		compatible = "mai-logic,articia-s";
+		bus-frequency = <33333333>;
+		bus-range = <0 0xff>;
+		ranges = <0x01000000 0 0x00000000 0xfe000000 0 0x00c00000	// PCI I/O
+		          0x02000000 0 0x80000000 0x80000000 0 0x7d000000	// PCI memory
+		          0x02000000 0 0x00000000 0xfd000000 0 0x01000000>;	// PCI alias memory (ISA)
+		// Configuration address and data register.
+		reg = <0xfec00cf8 4
+		       0xfee00cfc 4>;
+		8259-interrupt-acknowledge = <0xfef00000>;
+		// Do not define a interrupt-parent here, if there is no
+		// interrupt-map property.
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		isa@7 {
+			device_type = "isa";
+			compatible = "pciclass,0601";
+			vendor-id = <0x00001106>;
+			device-id = <0x00000686>;
+			revision-id = <0x00000010>;
+			class-code = <0x00060100>;
+			subsystem-id = <0>;
+			subsystem-vendor-id = <0>;
+			devsel-speed = <0x00000001>;
+			min-grant = <0>;
+			max-latency = <0>;
+			/* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
+			interrupt-parent = <&i8259>;
+			#interrupt-cells = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			dma-controller@0 {
+				compatible = "pnpPNP,200";
+				reg = <1 0x00000000 0x00000020
+				       1 0x00000080 0x00000010
+				       1 0x000000c0 0x00000020>;
+			};
+
+			i8259: interrupt-controller@20 {
+				device_type = "interrupt-controller";
+				compatible = "pnpPNP,000";
+				interrupt-controller;
+				reg = <1 0x00000020 0x00000002
+				       1 0x000000a0 0x00000002
+				       1 0x000004d0 0x00000002>;
+				reserved-interrupts = <2>;
+				#interrupt-cells = <2>;
+			};
+
+			timer@40 {
+				// Also adds pcspkr to platform devices.
+				compatible = "pnpPNP,100";
+				reg = <1 0x00000040 0x00000020>;
+			};
+
+			8042@60 {
+				device_type = "8042";
+				reg = <1 0x00000060 0x00000001
+				       1 0x00000064 0x00000001>;
+				interrupts = <1 3 12 3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				keyboard@0 {
+					compatible = "pnpPNP,303";
+					reg = <0>;
+				};
+
+				mouse@1 {
+					compatible = "pnpPNP,f03";
+					reg = <1>;
+				};
+			};
+
+			rtc@70 {
+				compatible = "pnpPNP,b00";
+				reg = <1 0x00000070 0x00000002>;
+				interrupts = <8 3>;
+			};
+
+			serial@3f8 {
+				device_type = "serial";
+				compatible = "pnpPNP,501","pnpPNP,500";
+				reg = <1 0x000003f8 0x00000008>;
+				interrupts = <4 3>;
+				clock-frequency = <1843200>;
+				current-speed = <115200>;
+			};
+
+			serial@2f8 {
+				device_type = "serial";
+				compatible = "pnpPNP,501","pnpPNP,500";
+				reg = <1 0x000002f8 0x00000008>;
+				interrupts = <3 3>;
+				clock-frequency = <1843200>;
+				current-speed = <115200>;
+			};
+
+			parallel@378 {
+				device_type = "parallel";
+				// No ECP support for now, otherwise add "pnpPNP,401".
+				compatible = "pnpPNP,400";
+				reg = <1 0x00000378 0x00000003
+				       1 0x00000778 0x00000003>;
+			};
+
+			fdc@3f0 {
+				device_type = "fdc";
+				compatible = "pnpPNP,700";
+				reg = <1 0x000003f0 0x00000008>;
+				interrupts = <6 3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				disk@0 {
+					reg = <0>;
+				};
+			};
+		};
+	};
+
+	chosen {
+		stdout-path = "/pci@80000000/isa@7/serial@3f8";
+	};
+};
diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts
new file mode 100644
index 000000000..75a376a99
--- /dev/null
+++ b/arch/powerpc/boot/dts/arches.dts
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree Source for AMCC Arches (dual 460GT board)
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Victor Gallardo <vgallardo@amcc.com>
+ * Adam Graham <agraham@amcc.com>
+ *
+ * Based on the glacier.dts file
+ *   Stefan Roese <sr@denx.de>
+ *   Copyright 2008 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,arches";
+	compatible = "amcc,arches";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460GT";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460gt";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460gt";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460gt", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <3>;
+			num-rx-chans = <24>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460gt", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460gt", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x02000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x01b60000>;
+					};
+					partition@1f60000 {
+						label = "env";
+						reg = <0x01f60000 0x00040000>;
+					};
+					partition@1fa0000 {
+						label = "u-boot";
+						reg = <0x01fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sttm@4a {
+					compatible = "ad,ad7414";
+					reg = <0x4a>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x0 0x8>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "sgmii";
+				phy-map = <0xffffffff>;
+				gpcs-address = <0x0000000a>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "sgmii";
+				phy-map = <0x00000000>;
+				gpcs-address = <0x0000000b>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef601100 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "sgmii";
+				phy-map = <0x00000001>;
+				gpcs-address = <0x0000000C>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
new file mode 100644
index 000000000..c541bd367
--- /dev/null
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Analogue & Micro ASP8347 Device Tree Source
+ *
+ * Copyright 2008 Codehermit
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Analogue & Micro ASP8347E";
+	compatible = "analogue-and-micro,asp8347e";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8347@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;	// 128MB at 0
+	};
+
+	localbus@ff005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8347e-localbus",
+			     "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xff005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		ranges = <
+			0 0 0xf0000000 0x02000000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	soc8349@ff000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xff000000 0x00100000>;
+		reg = <0xff000000 0x00000200>;
+		bus-frequency = <0>;
+
+		watchdog@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supported for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			compatible = "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <39 0x8>;
+			phy_type = "ulpi";
+			port0;
+		};
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 33 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			linux,network-index = <0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x1>;
+				};
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x2>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 34 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			linux,network-index = <1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		/* May need to remove if on a part without crypto engine */
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			num-channels = <4>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x0000007e>;
+			/* desc mask is for rev2.0,
+			 * we need runtime fixup for >2.0 */
+			descriptor-types-mask = <0x01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
+		stdout-path = &serial0;
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
new file mode 100644
index 000000000..b5861fa38
--- /dev/null
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -0,0 +1,302 @@
+/*
+ * Device Tree Source for AMCC Bamboo
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * FIXME: Draft only!
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,bamboo";
+	compatible = "amcc,bamboo";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <0x7 0x4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <115200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x0 0x4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x1 0x4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x3 0x4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x4 0x4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
+				interrupt-parent = < &UIC1 >;
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 * The chip also supports a larger memory range but
+			 * it's not naturally aligned, so our code will break
+			 */
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+				  0x02000000 0x00000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* Bamboo has all 4 IRQ pins tied together per slot */
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
+			interrupt-map = <
+				/* IDSEL 1 */
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
+
+				/* IDSEL 2 */
+				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
+
+				/* IDSEL 3 */
+				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
+
+				/* IDSEL 4 */
+				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
+			>;
+		};
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts
new file mode 100644
index 000000000..697159531
--- /dev/null
+++ b/arch/powerpc/boot/dts/bluestone.dts
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for Bluestone (APM821xx) board.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Tirumala R Marri <tmarri@apm.com>
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "apm,bluestone";
+	compatible = "apm,bluestone";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,apm821xx";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	OCM: ocm@400040000 {
+		compatible = "ibm,ocm";
+		status = "okay";
+		cell-index = <1>;
+		/* configured in U-Boot */
+		reg = <4 0x00040000 0x8000>; /* 32K */
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-apm821xx";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-apm821xx";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008
+			   0x030 0x008>;
+		cache-line-size = <32>;
+		cache-size = <262144>;
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-apm821xx";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal2";
+			descriptor-memory = "ocm";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>;
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x00400000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x00180000>;
+					};
+					partition@180000 {
+						label = "env";
+						reg = <0x00180000 0x00020000>;
+					};
+					partition@1a0000 {
+						label = "u-boot";
+						reg = <0x001a0000 0x00060000>;
+					};
+				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					/* 2Gb Nand Flash */
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "firmware";
+							reg   = <0x00000000 0x00C00000>;
+						};
+						partition@c00000 {
+							label = "environment";
+							reg   = <0x00C00000 0x00B00000>;
+						};
+						partition@1700000 {
+							label = "kernel";
+							reg   = <0x01700000 0x00E00000>;
+						};
+						partition@2500000 {
+							label = "root";
+							reg   = <0x02500000 0x08200000>;
+						};
+						partition@a700000 {
+							label = "device-tree";
+							reg   = <0x0A700000 0x00B00000>;
+						};
+						partition@b200000 {
+							label = "config";
+							reg   = <0x0B200000 0x00D00000>;
+						};
+						partition@bf00000 {
+							label = "diag";
+							reg   = <0x0BF00000 0x00C00000>;
+						};
+						partition@cb00000 {
+							label = "vendor";
+							reg   = <0x0CB00000 0x3500000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "st,m41t80";
+					reg = <0x68>;
+					interrupt-parent = <&UIC0>;
+					interrupts = <0x9 0x8>;
+				};
+				sttm@4C {
+					compatible = "adm,adm1032";
+					reg = <0x4C>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii";
+				reg = <0xef601500 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600c00 {
+				device_type = "network";
+				compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600c00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <16384>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIE0: pcie@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
new file mode 100644
index 000000000..5db1bff6b
--- /dev/null
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -0,0 +1,548 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,canyonlands";
+	compatible = "amcc,canyonlands";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460EX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460ex";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460ex";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	CPM0: cpm {
+		compatible = "ibm,cpm";
+		dcr-access-method = "native";
+		dcr-reg = <0x160 0x003>;
+		unused-units = <0x00000100>;
+		idle-doze = <0x02000000>;
+		standby = <0xfeff791d>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460ex", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
+		HWRNG: hwrng@110000 {
+			compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+			reg = <4 0x00110000 0x50>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <16>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+		};
+
+		USB0: ehci@bffd0400 {
+			compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1d 4>;
+			reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+		};
+
+		USB1: usb@bffd0000 {
+			compatible = "ohci-le";
+			reg = <4 0xbffd0000 0x60>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1e 4>;
+		};
+
+		USBOTG0: usbotg@bff80000 {
+			compatible = "amcc,dwc-otg";
+			reg = <0x4 0xbff80000 0x10000>;
+			interrupt-parent = <&USBOTG0>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x1 0x2>;
+			interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
+					 /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8
+					 /* DMA */ 0x2 &UIC0 0xc 0x4>;
+		};
+
+		AHBDMA: dma@bffd0800 {
+			compatible = "snps,dma-spear1340";
+			reg = <4 0xbffd0800 0x400>;
+			interrupt-parent = <&UIC3>;
+			interrupts = <0x5 0x4>;
+			#dma-cells = <3>;
+		};
+
+		SATA0: sata@bffd1000 {
+			compatible = "amcc,sata-460ex";
+			reg = <4 0xbffd1000 0x800>;
+			interrupt-parent = <&UIC3>;
+			interrupts = <0x0 0x4>;
+			dmas = <&AHBDMA 0 1 0>;
+			dma-names = "sata-dma";
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460ex", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460ex", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				cpld@2,0 {
+					compatible = "amcc,ppc460ex-bcsr";
+					reg = <2 0x0 0x9>;
+				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+                                rtc@68 {
+                                        compatible = "st,m41t80";
+                                        reg = <0x68>;
+					interrupt-parent = <&UIC2>;
+					interrupts = <0x19 0x8>;
+                                };
+                                sttm@48 {
+                                        compatible = "ad,ad7414";
+                                        reg = <0x48>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x14 0x8>;
+                                };
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			GPIO0: gpio@ef600b00 {
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600b00 0x00000048>;
+				gpio-controller;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-460ex", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+				reg = <0xef601500 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0 to 0x3f */
+			bus-range = <0x0 0x3f>;
+
+			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+		};
+
+		PCIE0: pcie@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pcie@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 80 to 0xbf */
+			bus-range = <0x80 0xbf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts
new file mode 100644
index 000000000..ea6e76ae2
--- /dev/null
+++ b/arch/powerpc/boot/dts/charon.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * charon board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * Copyright (C) 2010 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "anon,charon";
+	compatible = "anon,charon";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			device_type = "dma-controller";
+			compatible = "fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 {		// PSC1
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2400 {		// PSC3
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			fixed-link = <1 1 100 0 0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+		};
+
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+
+			dtt@28 {
+				compatible = "national,lm80";
+				reg = <0x28>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <	0 0 0xfc000000 0x02000000
+				1 0 0xe0000000 0x04000000 // CS1 range, SM501
+				3 0 0xe8000000 0x00080000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+
+		display@1,0 {
+			compatible = "smi,sm501";
+			reg = <1 0x00000000 0x00800000
+			       1 0x03e00000 0x00200000>;
+			mode = "640x480-32@60";
+			interrupts = <1 1 3>;
+			little-endian;
+		};
+
+		mram0@3,0 {
+			compatible = "mtd-ram";
+			reg = <3 0x00000 0x80000>;
+			bank-width = <1>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
new file mode 100644
index 000000000..66cae7be6
--- /dev/null
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * CM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+
+/ {
+	model = "schindler,cm5200";
+	compatible = "schindler,cm5200";
+
+	soc5200@f0000000 {
+		can@900 {
+			status = "disabled";
+		};
+
+		can@980 {
+			status = "disabled";
+		};
+
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2400 {		// PSC3
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {		// PSC5
+			status = "disabled";
+		};
+
+		psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			status = "disabled";
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+	};
+
+	pci@f0000d00 {
+		status = "disabled";
+	};
+
+	localbus {
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x2000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts
new file mode 100644
index 000000000..aea8af810
--- /dev/null
+++ b/arch/powerpc/boot/dts/currituck.dts
@@ -0,0 +1,242 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;	// spin table
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "ibm,currituck";
+	compatible = "ibm,currituck";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <0>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "okay";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <1>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x01f00000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00040000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	plb {
+		compatible = "ibm,plb6";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clock-frequency = <200000000>; // 200Mhz
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full
+			 * 32-bit range
+			 */
+			ranges = <0x00000000 0x00000200 0x00000000 0x80000000
+				  0x80000000 0x00000200 0x80000000 0x80000000>;
+			clock-frequency = <100000000>;
+
+			UART0: serial@10000000 {
+				device_type = "serial";
+				compatible = "ns16750", "ns16550";
+				reg = <0x10000000 0x00000008>;
+				virtual-reg = <0xe1000000>;
+				clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
+				current-speed = <115200>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <34 2>;
+			};
+
+			FPGA0: fpga@50000000 {
+				compatible = "ibm,currituck-fpga";
+				reg = <0x50000000 0x4>;
+			};
+
+			IIC0: i2c@0 {
+				compatible = "ibm,iic-currituck", "ibm,iic";
+				reg = <0x0 0x00000014>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <79 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+                                rtc@68 {
+                                        compatible = "st,m41t80", "m41st85";
+                                        reg = <0x68>;
+                                };
+			};
+		};
+
+		PCIE0: pcie@10100000000 {		// 4xGBIF1
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x00000101 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000100 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x80 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000140 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
+		};
+
+		PCIE1: pcie@30100000000 {		// 4xGBIF0
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x00000301 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000300 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x60 0x20>;
+
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000340 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
+		};
+
+		PCIE2: pcie@38100000000 {		// 2xGBIF0
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x00000381 0x00000000 0x0 0x10000000		/* Config space access */
+			       0x00000380 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xA0 0x20>;
+
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000003C0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0 to memsize filled in by zImage */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
+		};
+
+	};
+
+	chosen {
+		stdout-path = &UART0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
new file mode 100644
index 000000000..dfaf974c0
--- /dev/null
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Digsy MTC board Device Tree Source
+ *
+ * Copyright (C) 2009 Semihalf
+ *
+ * Based on the CM5200 by M. Balakowicz
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { gpio-controller; fsl,has-wdt; };
+&gpt1 { gpio-controller; };
+
+/ {
+	model = "intercontrol,digsy-mtc";
+	compatible = "intercontrol,digsy-mtc";
+
+	memory@0 {
+		reg = <0x00000000 0x02000000>;	// 32MB
+	};
+
+	soc5200@f0000000 {
+		rtc@800 {
+			status = "disabled";
+		};
+
+		psc@2000 {		// PSC1
+			status = "disabled";
+		};
+
+		psc@2200 {		// PSC2
+			status = "disabled";
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2c00 {		// PSC6
+			status = "disabled";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		i2c@3d00 {
+			eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+			};
+
+			rtc@56 {
+				compatible = "microcrystal,rv3029";
+				reg = <0x56>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3d40 {
+			status = "disabled";
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+
+	localbus {
+		ranges = <0 0 0xff000000 0x1000000
+			  4 0 0x60000000 0x0001000>;
+
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x1000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00a00000>;
+			};
+			partition@f00000 {
+				label = "u-boot";
+				reg = <0x00f00000 0x100000>;
+			};
+		};
+
+		can@4,0 {
+			compatible = "nxp,sja1000";
+			reg = <4 0x000 0x80>;
+			nxp,external-clock-frequency = <24000000>;
+			interrupts = <1 2 3>; // Level-low
+		};
+
+		can@4,100 {
+			compatible = "nxp,sja1000";
+			reg = <4 0x100 0x80>;
+			nxp,external-clock-frequency = <24000000>;
+			interrupts = <1 2 3>;  // Level-low
+		};
+
+		serial@4,200 {
+			compatible = "nxp,sc28l92";
+			reg = <4 0x200 0x10>;
+			interrupts = <1 3 3>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
new file mode 100644
index 000000000..5d11e6ea7
--- /dev/null
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -0,0 +1,337 @@
+/*
+ * Device Tree Source for IBM Ebony
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * FIXME: Draft only!
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,ebony";
+	compatible = "ibm,ebony";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440GP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; // Filled in by zImage
+			timebase-frequency = <0>; // Filled in by zImage
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440gp", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440gp", "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	CPC0: cpc {
+		compatible = "ibm,cpc-440gp";
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
+		// FIXME: anything else?
+	};
+
+	plb {
+		compatible = "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; // Filled in by zImage
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-440gp";
+			dcr-reg = <0x010 0x002>;
+			// FIXME: anything else?
+		};
+
+		SRAM0: sram {
+			compatible = "ibm,sram-440gp";
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
+		};
+
+		DMA0: dma {
+			// FIXME: ???
+			compatible = "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <4>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x7 0x4>;
+			clock-frequency = <0>; // Filled in by zImage
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; // Filled in by zImage
+				// ranges property is supplied by zImage
+				// based on firmware's configuration of the
+				// EBC bridge
+				interrupts = <0x5 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				small-flash@0,80000 {
+					compatible = "jedec-flash";
+					bank-width = <1>;
+					reg = <0x00000000 0x00080000 0x00080000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "OpenBIOS";
+						reg = <0x00000000 0x00080000>;
+						read-only;
+					};
+				};
+
+				nvram@1,0 {
+					/* NVRAM & RTC */
+					compatible = "ds1743-nvram";
+					#bytes = <0x2000>;
+					reg = <0x00000001 0x00000000 0x00002000>;
+				};
+
+				large-flash@2,0 {
+					compatible = "jedec-flash";
+					bank-width = <1>;
+					reg = <0x00000002 0x00000000 0x00400000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "fs";
+						reg = <0x00000000 0x00380000>;
+					};
+					partition@380000 {
+						label = "firmware";
+						reg = <0x00380000 0x00080000>;
+					};
+				};
+
+				ir@3,0 {
+					reg = <0x00000003 0x00000000 0x00000010>;
+				};
+
+				fpga@7,0 {
+					compatible = "Ebony-FPGA";
+					reg = <0x00000007 0x00000000 0x00000010>;
+					virtual-reg = <0xe8300000>;
+				};
+			};
+
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@40000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@40000400 {
+				/* FIXME */
+				compatible = "ibm,iic-440gp", "ibm,iic";
+				reg = <0x40000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+			IIC1: i2c@40000500 {
+				/* FIXME */
+				compatible = "ibm,iic-440gp", "ibm,iic";
+				reg = <0x40000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			GPIO0: gpio@40000700 {
+				/* FIXME */
+				compatible = "ibm,gpio-440gp";
+				reg = <0x40000700 0x00000020>;
+			};
+
+			ZMII0: emac-zmii@40000780 {
+				compatible = "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0x40000780 0x0000000c>;
+			};
+
+			EMAC0: ethernet@40000800 {
+				device_type = "network";
+				compatible = "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000070>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000001>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+			EMAC1: ethernet@40000900 {
+				device_type = "network";
+				compatible = "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000070>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000001>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+
+
+			GPT0: gpt@40000a00 {
+				/* FIXME */
+				reg = <0x40000a00 0x000000d4>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
+			};
+
+		};
+
+		PCIX0: pci@20ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
+			primary;
+			reg = <0x00000002 0x0ec00000 0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000 0x00000004     /* Special cycles */
+			       0x00000002 0x0ec80000 0x000000f0	/* Internal registers */
+			       0x00000002 0x0ec80100 0x000000fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* Ebony has all 4 IRQ pins tied together per slot */
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
+			interrupt-map = <
+				/* IDSEL 1 */
+				0x800 0x0 0x0 0x0 &UIC0 0x17 0x8
+
+				/* IDSEL 2 */
+				0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8
+
+				/* IDSEL 3 */
+				0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8
+
+				/* IDSEL 4 */
+				0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8
+			>;
+		};
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@40000200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts
new file mode 100644
index 000000000..7a1231d9d
--- /dev/null
+++ b/arch/powerpc/boot/dts/eiger.dts
@@ -0,0 +1,427 @@
+/*
+ * Device Tree Source for AMCC (AppliedMicro) Eiger(460SX)
+ *
+ * Copyright 2009 AMCC (AppliedMicro) <ttnguyen@amcc.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,eiger";
+	compatible = "amcc,eiger";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		ethernet3 = &EMAC3;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460SX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460sx";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460sx";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460sx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x62>;
+			num-tx-chans = <4>;
+			num-rx-chans = <32>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x1 0x4
+					/*TXDE*/  0x2 0x4
+					/*RXDE*/  0x3 0x4
+					/*COAL TX0*/ 0x18 0x2
+					/*COAL TX1*/ 0x19 0x2
+					/*COAL TX2*/ 0x1a 0x2
+					/*COAL TX3*/ 0x1b 0x2
+					/*COAL RX0*/ 0x1c 0x2
+					/*COAL RX1*/ 0x1d 0x2
+					/*COAL RX2*/ 0x1e 0x2
+					/*COAL RX3*/ 0x1f 0x2>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460sx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460sx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					/* reg property is supplied in by U-Boot */
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					/* reg property is supplied by U-boot */
+					ccr = <0x00003000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+						partition@0 {
+							label = "uboot";
+							reg = <0x00000000 0x00200000>;
+						};
+						partition@200000 {
+							label = "uboot-environment";
+							reg = <0x00200000 0x00100000>;
+						};
+						partition@300000 {
+							label = "linux";
+							reg = <0x00300000 0x00300000>;
+						};
+						partition@600000 {
+							label = "root-file-system";
+							reg = <0x00600000 0x01900000>;
+						};
+						partition@1f00000 {
+							label = "device-tree";
+							reg = <0x01f00000 0x00020000>;
+						};
+						partition@1f20000 {
+							label = "data";
+							reg = <0x01f20000 0x060E0000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600400 {
+				compatible = "ibm,iic-460sx", "ibm,iic";
+				reg = <0xef600400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				index = <0>;
+			};
+
+			IIC1: i2c@ef600500 {
+				compatible = "ibm,iic-460sx", "ibm,iic";
+				reg = <0xef600500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				index = <1>;
+			};
+
+			RGMII0: emac-rgmii@ef600900 {
+				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+				reg = <0xef600900 0x00000008>;
+				has-mdio;
+			};
+
+			RGMII1: emac-rgmii@ef600920 {
+				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+				reg = <0xef600920 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef600e50 {
+				compatible = "ibm,tah-460sx", "ibm,tah";
+				reg = <0xef600e50 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef600f50 {
+				compatible = "ibm,tah-460sx", "ibm,tah";
+				reg = <0xef600f50 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600a00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600a00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600b00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600b00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef600c00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x15 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600c00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC3: ethernet@ef600d00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC3>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x16 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600d00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <3>;
+				mal-rx-channel = <24>;
+				cell-index = <3>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+	};
+	chosen {
+		stdout-path = "/plb/opb/serial@ef600200";
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts
new file mode 100644
index 000000000..9ae2d92f5
--- /dev/null
+++ b/arch/powerpc/boot/dts/ep8248e.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the Embedded Planet EP8248E board running PlanetCore.
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+/ {
+	model = "EP8248E";
+	compatible = "fsl,ep8248e";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		planetcore-SMC1 = &smc1;
+		planetcore-SCC1 = &scc1;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		serial0 = &smc1;
+		serial1 = &scc1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8248@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	localbus@f0010100 {
+		compatible = "fsl,mpc8248-localbus",
+		             "fsl,pq2-localbus",
+		             "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xf0010100 0x40>;
+
+		ranges = <0 0 0xfc000000 0x04000000
+		          1 0 0xfa000000 0x00008000>;
+
+		flash@0,3800000 {
+			compatible = "cfi-flash";
+			reg = <0 0x3800000 0x800000>;
+			bank-width = <4>;
+			device-width = <2>;
+		};
+
+		bcsr@1,0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			reg = <1 0 0x10>;
+			compatible = "fsl,ep8248e-bcsr";
+			ranges;
+
+			mdio {
+				compatible = "fsl,ep8248e-mdio-bitbang";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1 8 1>;
+
+				PHY0: ethernet-phy@0 {
+					interrupt-parent = <&PIC>;
+					reg = <0>;
+				};
+
+				PHY1: ethernet-phy@1 {
+					interrupt-parent = <&PIC>;
+					reg = <1>;
+				};
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	soc@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus";
+		ranges = <0x00000000 0xf0000000 0x00053000>;
+
+		// Temporary until code stops depending on it.
+		device_type = "soc";
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <0xf0000000 0x00053000>;
+
+		cpm@119c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,mpc8248-cpm", "fsl,cpm2",
+			             "simple-bus";
+			reg = <0x119c0 0x30>;
+			ranges;
+
+			muram {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x2000 0x9800 0x800>;
+				};
+			};
+
+			brg@119f0 {
+				compatible = "fsl,mpc8248-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x119f0 0x10 0x115f0 0x10>;
+			};
+
+			/* Monitor port/SMC1 */
+			smc1: serial@11a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc8248-smc-uart",
+				             "fsl,cpm2-smc-uart";
+				reg = <0x11a80 0x20 0x87fc 2>;
+				interrupts = <4 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <7>;
+				fsl,cpm-command = <0x1d000000>;
+				linux,planetcore-label = "SMC1";
+			};
+
+			/* "Serial" port/SCC1 */
+			scc1: serial@11a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8248-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x11a00 0x20 0x8000 0x100>;
+				interrupts = <40 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x00800000>;
+				linux,planetcore-label = "SCC1";
+			};
+
+			eth0: ethernet@11300 {
+				device_type = "network";
+				compatible = "fsl,mpc8248-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <32 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY0>;
+				linux,network-index = <0>;
+				fsl,cpm-command = <0x12000300>;
+			};
+
+			eth1: ethernet@11320 {
+				device_type = "network";
+				compatible = "fsl,mpc8248-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <33 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&PHY1>;
+				linux,network-index = <1>;
+				fsl,cpm-command = <0x16200300>;
+			};
+
+			usb@11b60 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,mpc8248-usb",
+				             "fsl,cpm2-usb";
+				reg = <0x11b60 0x18 0x8b00 0x100>;
+				interrupt-parent = <&PIC>;
+				interrupts = <11 8>;
+				fsl,cpm-command = <0x2e600000>;
+			};
+		};
+
+		PIC: interrupt-controller@10c00 {
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x10c00 0x80>;
+			compatible = "fsl,mpc8248-pic", "fsl,pq2-pic";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts
new file mode 100644
index 000000000..b6b7e9787
--- /dev/null
+++ b/arch/powerpc/boot/dts/ep88xc.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * EP88xC Device Tree Source
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "EP88xC";
+	compatible = "fsl,ep88xc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,885@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	localbus@fa200100 {
+		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xfa200100 0x40>;
+
+		ranges = <
+			0x0 0x0 0xfc000000 0x4000000
+			0x3 0x0 0xfa000000 0x1000000
+		>;
+
+		flash@0,2000000 {
+			compatible = "cfi-flash";
+			reg = <0x0 0x2000000 0x2000000>;
+			bank-width = <4>;
+			device-width = <2>;
+		};
+
+		board-control@3,400000 {
+			reg = <0x3 0x400000 0x10>;
+			compatible = "fsl,ep88xc-bcsr";
+		};
+	};
+
+	soc@fa200000 {
+		compatible = "fsl,mpc885", "fsl,pq1-soc";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xfa200000 0x4000>;
+		bus-frequency = <0>;
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <0xfa200000 0x4000>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			PHY0: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+
+			PHY1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+		};
+
+		ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY0>;
+			linux,network-index = <0>;
+		};
+
+		ethernet@1e00 {
+			device_type = "network";
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0x1e00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <7 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY1>;
+			linux,network-index = <1>;
+		};
+
+		PIC: interrupt-controller@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x24>;
+			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
+		};
+
+		pcmcia@80 {
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			compatible = "fsl,pq-pcmcia";
+			device_type = "pcmcia";
+			reg = <0x80 0x80>;
+			interrupt-parent = <&PIC>;
+			interrupts = <13 1>;
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
+			command-proc = <0x9c0>;
+			interrupts = <0>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+			reg = <0x9c0 0x40>;
+			ranges;
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x1c00>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc885-brg",
+				             "fsl,cpm1-brg",
+				             "fsl,cpm-brg";
+				reg = <0x9f0 0x10>;
+			};
+
+			CPM_PIC: interrupt-controller@930 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc885-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+			// MON-1
+			serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc885-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x90>;
+				linux,planetcore-label = "SMC1";
+			};
+
+			// SER-1
+			serial@a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc885-scc-uart",
+				             "fsl,cpm1-scc-uart";
+				reg = <0xa20 0x20 0x3d00 0x80>;
+				interrupts = <29>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x40>;
+				linux,planetcore-label = "SCC2";
+			};
+
+			usb@a00 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,mpc885-usb",
+				             "fsl,cpm1-usb";
+				reg = <0xa00 0x18 0x1c00 0x80>;
+				interrupt-parent = <&CPM_PIC>;
+				interrupts = <30>;
+				fsl,cpm-command = <0000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/Makefile b/arch/powerpc/boot/dts/fsl/Makefile
new file mode 100644
index 000000000..d2cc8e1f0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/Makefile
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
+
+# MPC85xx platforms
+dtb-$(CONFIG_BSC9131_RDB) += bsc9131rdb.dtb
+dtb-$(CONFIG_BSC9132_QDS) += bsc9132qds.dtb
+dtb-$(CONFIG_C293_PCIE) += c293pcie.dtb
+dtb-$(CONFIG_MPC8536_DS) += mpc8536ds.dtb mpc8536ds_36b.dtb
+dtb-$(CONFIG_MPC85xx_DS) += mpc8544ds.dtb mpc8572ds_camp_core0.dtb
+dtb-$(CONFIG_MPC85xx_DS) += mpc8572ds_camp_core1.dtb mpc8572ds_36b.dtb
+dtb-$(CONFIG_MPC85xx_DS) += mpc8572ds.dtb
+dtb-$(CONFIG_MPC85xx_MDS) += mpc8568mds.dtb mpc8569mds.dtb p1021mds.dtb
+dtb-$(CONFIG_MPC85xx_RDB) += p1020mbg-pc_32b.dtb p1020mbg-pc_36b.dtb
+dtb-$(CONFIG_MPC85xx_RDB) += p1020rdb_36b.dtb p1020rdb.dtb p1020rdb-pc_32b.dtb
+dtb-$(CONFIG_MPC85xx_RDB) += p1020rdb-pc_36b.dtb p1020rdb-pc_camp_core0.dtb
+dtb-$(CONFIG_MPC85xx_RDB) += p1020rdb-pc_camp_core1.dtb p1020rdb-pd.dtb
+dtb-$(CONFIG_MPC85xx_RDB) += p1020utm-pc_32b.dtb p1020utm-pc_36b.dtb
+dtb-$(CONFIG_MPC85xx_RDB) += p1021rdb-pc_32b.dtb p1021rdb-pc_36b.dtb
+dtb-$(CONFIG_MPC85xx_RDB) += p1024rdb_32b.dtb p1024rdb_36b.dtb p1025rdb_32b.dtb
+dtb-$(CONFIG_MPC85xx_RDB) += p1025rdb_36b.dtb
+dtb-$(CONFIG_P1010_RDB) += p1010rdb-pa_36b.dtb p1010rdb-pa.dtb
+dtb-$(CONFIG_P1010_RDB) += p1010rdb-pb_36b.dtb p1010rdb-pb.dtb
+dtb-$(CONFIG_P1022_DS) += p1022ds_32b.dtb p1022ds_36b.dtb
+dtb-$(CONFIG_P1022_RDK) += p1022rdk.dtb
+dtb-$(CONFIG_P1023_RDB) += p1023rdb.dtb
+dtb-$(CONFIG_PPC_P2020) += p2020ds.dtb
+dtb-$(CONFIG_TWR_P102x) += p1025twr.dtb
+dtb-$(CONFIG_CORENET_GENERIC) += b4420qds.dtb b4860qds.dtb cyrus_p5020.dtb
+dtb-$(CONFIG_CORENET_GENERIC) += kmcent2.dtb kmcoge4.dtb oca4080.dtb
+dtb-$(CONFIG_CORENET_GENERIC) += p2041rdb.dtb p3041ds.dtb p4080ds.dtb
+dtb-$(CONFIG_CORENET_GENERIC) += p5020ds.dtb p5040ds.dtb t1023rdb.dtb
+dtb-$(CONFIG_CORENET_GENERIC) += t1024qds.dtb t1024rdb.dtb t1040d4rdb.dtb
+dtb-$(CONFIG_CORENET_GENERIC) += t1040qds.dtb t1040rdb.dtb t1040rdb-rev-a.dtb
+dtb-$(CONFIG_CORENET_GENERIC) += t1042d4rdb.dtb t1042qds.dtb t1042rdb.dtb
+dtb-$(CONFIG_CORENET_GENERIC) += t1042rdb_pi.dtb t2080qds.dtb t2080rdb.dtb
+dtb-$(CONFIG_CORENET_GENERIC) += t2081qds.dtb t4240qds.dtb t4240rdb.dtb
+dtb-$(CONFIG_PPA8548) += ppa8548.dtb
+dtb-$(CONFIG_GE_IMP3A) += ge_imp3a.dtb
+dtb-$(CONFIG_MVME2500) += mvme2500.dtb
+
+# MPC86xx platforms
+dtb-$(CONFIG_GEF_SBC310) += gef_sbc310.dtb
+dtb-$(CONFIG_GEF_SBC610) += gef_sbc610.dtb
+dtb-$(CONFIG_GEF_PPC9A) += gef_ppc9a.dtb
+dtb-$(CONFIG_MVME7100) += mvme7100.dtb
diff --git a/arch/powerpc/boot/dts/fsl/b4420qds.dts b/arch/powerpc/boot/dts/fsl/b4420qds.dts
new file mode 100644
index 000000000..cd9203cee
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4420qds.dts
@@ -0,0 +1,50 @@
+/*
+ * B4420DS Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/include/ "b4420si-pre.dtsi"
+/include/ "b4qds.dtsi"
+
+/ {
+	model = "fsl,B4420QDS";
+	compatible = "fsl,B4420QDS";
+
+	ifc: localbus@ffe124000 {
+		board-control@3,0 {
+			compatible = "fsl,b4420qds-fpga", "fsl,fpga-qixis";
+		};
+	};
+
+};
+
+/include/ "b4420si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
new file mode 100644
index 000000000..f996cced4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
@@ -0,0 +1,97 @@
+/*
+ * B4420 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/include/ "b4si-post.dtsi"
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4420-pcie", "fsl,qoriq-pcie-v2.4";
+};
+
+&dcsr {
+	dcsr-epu@0 {
+		compatible = "fsl,b4420-dcsr-epu", "fsl,dcsr-epu";
+	};
+	dcsr-npc {
+		compatible = "fsl,b4420-dcsr-cnpc", "fsl,dcsr-cnpc";
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4420-dcsr-dpaa", "fsl,dcsr-dpaa";
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4420-dcsr-ocn", "fsl,dcsr-ocn";
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4420-dcsr-nal", "fsl,dcsr-nal";
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4420-dcsr-rcpm", "fsl,dcsr-rcpm";
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+};
+
+&soc {
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4420-l3-cache-controller", "cache";
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
+	};
+
+	global-utilities@e1000 {
+		compatible = "fsl,b4420-clockgen", "fsl,b4-clockgen",
+			      "fsl,qoriq-clockgen-2.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0";
+	};
+
+	L2_1: l2-cache-controller@c20000 {
+		compatible = "fsl,b4420-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
new file mode 100644
index 000000000..bb7b9b9f3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -0,0 +1,85 @@
+/*
+ * B4420 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,B4420";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		usb0 = &usb0;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4860qds.dts b/arch/powerpc/boot/dts/fsl/b4860qds.dts
new file mode 100644
index 000000000..a8bc41995
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4860qds.dts
@@ -0,0 +1,117 @@
+/*
+ * B4860DS Device Tree Source
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "b4860si-pre.dtsi"
+/include/ "b4qds.dtsi"
+
+/ {
+	model = "fsl,B4860QDS";
+	compatible = "fsl,B4860QDS";
+
+	aliases {
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xaui_slot1 = &phy_xaui_slot1;
+		phy_xaui_slot2 = &phy_xaui_slot2;
+	};
+
+	ifc: localbus@ffe124000 {
+		board-control@3,0 {
+			compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis";
+		};
+	};
+
+	soc@ffe000000 {
+		fman@400000 {
+			ethernet@e8000 {
+				phy-handle = <&phy_sgmii_1e>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@ea000 {
+				phy-handle = <&phy_sgmii_1f>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xaui_slot1>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&phy_xaui_slot2>;
+				phy-connection-type = "xgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_1e: ethernet-phy@1e {
+					reg = <0x1e>;
+					status = "disabled";
+				};
+
+				phy_sgmii_1f: ethernet-phy@1f {
+					reg = <0x1f>;
+					status = "disabled";
+				};
+			};
+
+			mdio@fd000 {
+				phy_xaui_slot1: xaui-phy@slot1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x7>;
+					status = "disabled";
+				};
+
+				phy_xaui_slot2: xaui-phy@slot2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x6>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+/include/ "b4860si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
new file mode 100644
index 000000000..868719821
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
@@ -0,0 +1,284 @@
+/*
+ * B4860 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "b4si-post.dtsi"
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4860-pcie", "fsl,qoriq-pcie-v2.4";
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 20>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&dcsr {
+	dcsr-epu@0 {
+		compatible = "fsl,b4860-dcsr-epu", "fsl,dcsr-epu";
+	};
+	dcsr-npc {
+		compatible = "fsl,b4860-dcsr-cnpc", "fsl,dcsr-cnpc";
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4860-dcsr-dpaa", "fsl,dcsr-dpaa";
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4860-dcsr-ocn", "fsl,dcsr-ocn";
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4860-dcsr-nal", "fsl,dcsr-nal";
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4860-dcsr-rcpm", "fsl,dcsr-rcpm";
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc";
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&bportals {
+	bman-portal@38000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <133 2 0 0>;
+	};
+	bman-portal@3c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <135 2 0 0>;
+	};
+	bman-portal@40000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <137 2 0 0>;
+	};
+	bman-portal@44000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <139 2 0 0>;
+	};
+	bman-portal@48000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+		interrupts = <141 2 0 0>;
+	};
+	bman-portal@4c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+		interrupts = <143 2 0 0>;
+	};
+	bman-portal@50000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+		interrupts = <145 2 0 0>;
+	};
+	bman-portal@54000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+		interrupts = <147 2 0 0>;
+	};
+	bman-portal@58000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+		interrupts = <149 2 0 0>;
+	};
+	bman-portal@5c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+		interrupts = <151 2 0 0>;
+	};
+	bman-portal@60000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+		interrupts = <153 2 0 0>;
+	};
+};
+
+&qportals {
+	qportal14: qman-portal@38000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <132 0x2 0 0>;
+		cell-index = <0xe>;
+	};
+	qportal15: qman-portal@3c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <134 0x2 0 0>;
+		cell-index = <0xf>;
+	};
+	qportal16: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <136 0x2 0 0>;
+		cell-index = <0x10>;
+	};
+	qportal17: qman-portal@44000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <138 0x2 0 0>;
+		cell-index = <0x11>;
+	};
+	qportal18: qman-portal@48000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+		interrupts = <140 0x2 0 0>;
+		cell-index = <0x12>;
+	};
+	qportal19: qman-portal@4c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+		interrupts = <142 0x2 0 0>;
+		cell-index = <0x13>;
+	};
+	qportal20: qman-portal@50000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+		interrupts = <144 0x2 0 0>;
+		cell-index = <0x14>;
+	};
+	qportal21: qman-portal@54000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+		interrupts = <146 0x2 0 0>;
+		cell-index = <0x15>;
+	};
+	qportal22: qman-portal@58000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+		interrupts = <148 0x2 0 0>;
+		cell-index = <0x16>;
+	};
+	qportal23: qman-portal@5c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+		interrupts = <150 0x2 0 0>;
+		cell-index = <0x17>;
+	};
+	qportal24: qman-portal@60000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+		interrupts = <152 0x2 0 0>;
+		cell-index = <0x18>;
+	};
+};
+
+&soc {
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 9>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4860-l3-cache-controller", "cache";
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
+	};
+
+	global-utilities@e1000 {
+		compatible = "fsl,b4860-clockgen", "fsl,b4-clockgen",
+			      "fsl,qoriq-clockgen-2.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0";
+	};
+
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+	};
+
+	L2_1: l2-cache-controller@c20000 {
+		compatible = "fsl,b4860-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
new file mode 100644
index 000000000..388ba1b15
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -0,0 +1,104 @@
+/*
+ * B4860 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,B4860";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		usb0 = &usb0;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/b4qds.dtsi b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
new file mode 100644
index 000000000..05be919f3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
@@ -0,0 +1,280 @@
+/*
+ * B4420DS Device Tree Source
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/ {
+	model = "fsl,B4QDS";
+	compatible = "fsl,B4QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		crypto = &crypto;
+		phy_sgmii_10 = &phy_sgmii_10;
+		phy_sgmii_11 = &phy_sgmii_11;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 10MB for Linux Kernel Image */
+				reg = <0x00200000 0x00A00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@c00000 {
+				/* 500MB for Root file System Image */
+				reg = <0x00c00000 0x1F400000>;
+				label = "NAND RFS Image";
+			};
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01052000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+		};
+
+		sdhc@114000 {
+			/*Disabled as there is no sdhc connector on B4420QDS board*/
+			status = "disabled";
+		};
+
+		i2c@118000 {
+			mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+					};
+					eeprom@51 {
+						compatible = "atmel,24c256";
+						reg = <0x51>;
+					};
+					eeprom@53 {
+						compatible = "atmel,24c256";
+						reg = <0x53>;
+					};
+					eeprom@57 {
+						compatible = "atmel,24c256";
+						reg = <0x57>;
+					};
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+				};
+
+				i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+
+					adt7461@4c {
+						compatible = "adi,adt7461";
+						reg = <0x4c>;
+					};
+				};
+			};
+		};
+
+		usb@210000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_10>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_11>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_1c>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_sgmii_1d>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_10: ethernet-phy@10 {
+					reg = <0x10>;
+				};
+
+				phy_sgmii_11: ethernet-phy@11 {
+					reg = <0x11>;
+				};
+
+				phy_sgmii_1c: ethernet-phy@1c {
+					reg = <0x1c>;
+					status = "disabled";
+				};
+
+				phy_sgmii_1d: ethernet-phy@1d {
+					reg = <0x1d>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "b4si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
new file mode 100644
index 000000000..fb3200b00
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -0,0 +1,487 @@
+/*
+ * B4420 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc";
+	interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,b4-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,b4-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0
+			      94 2 0 0
+			      95 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,b4-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,b4-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,b4-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,b4-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,b4-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+};
+
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+	bman-portal@28000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <125 2 0 0>;
+	};
+	bman-portal@2c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <127 2 0 0>;
+	};
+	bman-portal@30000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <129 2 0 0>;
+	};
+	bman-portal@34000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <131 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+	qportal10: qman-portal@28000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <124 0x2 0 0>;
+		cell-index = <0xa>;
+	};
+	qportal11: qman-portal@2c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <126 0x2 0 0>;
+		cell-index = <0xb>;
+	};
+	qportal12: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <128 0x2 0 0>;
+		cell-index = <0xc>;
+	};
+	qportal13: qman-portal@34000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <130 0x2 0 0>;
+		cell-index = <0xd>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 2>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,b4-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 4>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 0>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible =  "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>;
+		fsl,portid-mapping = <0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 1>;
+
+
+		/* PCIe, DMA, SRIO */
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <8 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* AXI2, Maple */
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* Q/BMan */
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+
+		/* AXI1, FMAN */
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+	};
+
+/include/ "qoriq-mpic4.3.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,b4-device-config";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-clockgen2.dtsi"
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "elo3-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qonverge-usb2-dr-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		sdhci,auto-cmd12;
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-sec5.3-0.dtsi"
+
+/include/ "qoriq-qman3.dtsi"
+	qman: qman@318000 {
+		interrupts = <16 2 1 28>;
+	};
+
+/include/ "qoriq-bman1.dtsi"
+	bman: bman@31a000 {
+		interrupts = <16 2 1 29>;
+	};
+
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+	fman@400000 {
+		interrupts = <96 2 0 0>, <16 2 1 30>;
+
+		muram@0 {
+			compatible = "fsl,fman-muram";
+			reg = <0x0 0x80000>;
+		};
+
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts
new file mode 100644
index 000000000..0ba86a6dc
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BSC9131 RDB Device Tree Source
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ */
+
+/include/ "bsc9131si-pre.dtsi"
+
+/ {
+	model = "fsl,bsc9131rdb";
+	compatible = "fsl,bsc9131rdb";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_ifc: ifc: memory-controller@ff71e000 {
+		/* NAND Flash on board */
+		ranges = <0x0 0x0 0x0 0xff800000 0x00004000>;
+		reg = <0x0 0xff71e000 0x0 0x2000>;
+	};
+
+	board_soc: soc: soc@ff700000 {
+		ranges = <0x0 0x0 0xff700000 0x100000>;
+	};
+};
+
+/include/ "bsc9131rdb.dtsi"
+/include/ "bsc9131si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
new file mode 100644
index 000000000..53f8b9563
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
@@ -0,0 +1,104 @@
+/*
+ * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+
+	nand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x0 0x0 0x4000>;
+
+	};
+};
+
+&board_soc {
+	/* BSC9131RDB does not have any device on i2c@3100 */
+	i2c@3100 {
+		status = "disabled";
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x3>;
+		};
+	};
+
+	sdhc@2e000 {
+		status = "disabled";
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xcccccccd>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <249999999>;
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
new file mode 100644
index 000000000..5c53cee87
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi
@@ -0,0 +1,189 @@
+/*
+ * BSC9131 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc";
+	interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,bsc9131-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,bsc9131-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,bsc9131-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-duart-0.dtsi"
+	serial0: serial@4500 {
+		interrupts = <18 2 0 0>;
+	};
+
+	serial1: serial@4600 {
+		interrupts = <18 2 0 0 >;
+	};
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+		interrupts = <22 0x2 0 0>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	gpio-controller@f000 {
+		interrupts = <19 0x2 0 0>;
+		};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9131-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+	dma-channel@0 {
+		interrupts = <62 2 0 0>;
+	};
+
+	dma-channel@80 {
+		interrupts = <63 2 0 0>;
+	};
+
+	dma-channel@100 {
+		interrupts = <64 2 0 0>;
+	};
+
+	dma-channel@180 {
+		interrupts = <65 2 0 0>;
+	};
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+	compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+	interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		sdhci,auto-cmd12;
+		interrupts = <41 0x2 0 0>;
+	};
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+	interrupts	 = <57 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		interrupts	 = <58 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		interrupts	 = <59 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		interrupts	 = <60 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		interrupts	 = <61 2 0 0>;
+	};
+};
+
+/include/ "pq3-mpic.dtsi"
+
+timer@41100 {
+	compatible = "fsl,mpic-v1.2-msgr", "fsl,mpic-msg";
+	reg = <0x41400 0x200>;
+	interrupts = <
+		0xb0 2
+		0xb1 2
+		0xb2 2
+		0xb3 2>;
+};
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+	queue-group@b0000 {
+		interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+	};
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+	queue-group@b1000 {
+		interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+	};
+};
+
+global-utilities@e0000 {
+		compatible = "fsl,bsc9131-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi
new file mode 100644
index 000000000..f6ec4a675
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi
@@ -0,0 +1,62 @@
+/*
+ * BSC9131 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,BSC9131";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,BSC9131@0 {
+			device_type = "cpu";
+			compatible = "fsl,e500v2";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dts b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts
new file mode 100644
index 000000000..ce642e879
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BSC9132 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ */
+
+/include/ "bsc9132si-pre.dtsi"
+
+/ {
+	model = "fsl,bsc9132qds";
+	compatible = "fsl,bsc9132qds";
+
+	memory {
+		device_type = "memory";
+	};
+
+	ifc: memory-controller@ff71e000 {
+		/* NOR, NAND Flash on board */
+		ranges = <0x0 0x0 0x0 0x88000000 0x08000000
+			  0x1 0x0 0x0 0xff800000 0x00010000>;
+		reg = <0x0 0xff71e000 0x0 0x2000>;
+	};
+
+	soc: soc@ff700000 {
+		ranges = <0x0 0x0 0xff700000 0x100000>;
+	};
+
+	pci0: pcie@ff70a000 {
+		reg = <0 0xff70a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xc0010000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x90000000
+				  0x2000000 0x0 0x90000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "bsc9132qds.dtsi"
+/include/ "bsc9132si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
new file mode 100644
index 000000000..fead484a8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
@@ -0,0 +1,113 @@
+/*
+ * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x4000>;
+	};
+};
+
+&soc {
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <30000000>;
+		};
+	};
+
+	i2c@3000 {
+		fpga: fpga@66 {
+			compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+			reg = <0x66>;
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x1f>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xcccccccd>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <249999999>;
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
new file mode 100644
index 000000000..4da451e00
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
@@ -0,0 +1,209 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc";
+	/* FIXME: Test whether interrupts are split */
+	interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,bsc9132-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x2 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x2 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,bsc9132-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,bsc9132-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,bsc9132-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-duart-0.dtsi"
+	serial0: serial@4500 {
+		interrupts = <18 2 0 0>;
+	};
+
+	serial1: serial@4600 {
+		interrupts = <18 2 0 0 >;
+	};
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+		interrupts = <22 0x2 0 0>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	gpio-controller@f000 {
+		interrupts = <19 0x2 0 0>;
+		};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9132-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 1 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+	dma-channel@0 {
+		interrupts = <62 2 0 0>;
+	};
+
+	dma-channel@80 {
+		interrupts = <63 2 0 0>;
+	};
+
+	dma-channel@100 {
+		interrupts = <64 2 0 0>;
+	};
+
+	dma-channel@180 {
+		interrupts = <65 2 0 0>;
+	};
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+	compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+	interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		fsl,sdhci-auto-cmd12;
+		interrupts = <41 0x2 0 0>;
+	};
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+	interrupts	 = <57 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		interrupts	 = <58 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		interrupts	 = <59 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		interrupts	 = <60 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		interrupts	 = <61 2 0 0>;
+	};
+};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+	queue-group@b0000 {
+		interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+	};
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+	queue-group@b1000 {
+		interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+	};
+};
+
+global-utilities@e0000 {
+		compatible = "fsl,bsc9132-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
new file mode 100644
index 000000000..90f7949fe
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
@@ -0,0 +1,67 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500v2@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu1: PowerPC,e500v2@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/c293pcie.dts b/arch/powerpc/boot/dts/fsl/c293pcie.dts
new file mode 100644
index 000000000..e2fdac2ed
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/c293pcie.dts
@@ -0,0 +1,224 @@
+/*
+ * C293 PCIE Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "c293si-pre.dtsi"
+
+/ {
+	model = "fsl,C293PCIE";
+	compatible = "fsl,C293PCIE";
+
+	memory {
+		device_type = "memory";
+	};
+
+	ifc: memory-controller@fffe1e000 {
+		reg = <0xf 0xffe1e000 0 0x2000>;
+		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
+			  0x1 0x0 0xf 0xff800000 0x00010000
+			  0x2 0x0 0xf 0xffdf0000 0x00010000>;
+
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+&ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* 1MB for DTB Image */
+			reg = <0x0 0x00100000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@100000 {
+			/* 8 MB for Linux Kernel Image */
+			reg = <0x00100000 0x00800000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@900000 {
+			/* 53MB for rootfs */
+			reg = <0x00900000 0x03500000>;
+			label = "NOR Rootfs Image";
+		};
+
+		partition@3e00000 {
+			/* 1MB for blob encrypted key */
+			reg = <0x03e00000 0x00100000>;
+			label = "NOR blob encrypted key";
+		};
+
+		partition@3f00000 {
+			/* 512KB for u-boot Bootloader Image and evn */
+			reg = <0x03f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 16MB for Linux Kernel Image */
+			reg = <0x00200000 0x01000000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@1200000 {
+			/* 4078MB for Root file System Image */
+			reg = <0x00600000 0xfee00000>;
+			label = "NAND RFS Image";
+		};
+	};
+
+	cpld@2,0 {
+		compatible = "fsl,c293pcie-cpld";
+		reg = <0x2 0x0 0x20>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		eeprom@50 {
+			compatible = "st,24c1024", "atmel,24c1024";
+			reg = <0x50>;
+		};
+
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			partition@0 {
+				/* 1MB for u-boot Bootloader Image */
+				/* 1MB for Environment */
+				reg = <0x0 0x00100000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 512KB for DTB Image */
+				reg = <0x00100000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@180000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00180000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@580000 {
+				/* 10.5MB for RFS Image */
+				reg = <0x00580000 0x00a80000>;
+				label = "SPI Flash RFS Image";
+			};
+		};
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <2 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x2>;
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+/include/ "c293si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi
new file mode 100644
index 000000000..2d443d519
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi
@@ -0,0 +1,189 @@
+/*
+ * C293 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,c293-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,c293-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,c293-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2,512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,c293-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+
+	crypto@80000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@80000 {
+		reg = <0x80000 0x20000>;
+		ranges = <0x0 0x80000 0x20000>;
+
+		jr@1000 {
+			interrupts = <45 2 0 0>;
+		};
+		jr@2000 {
+			interrupts = <57 2 0 0>;
+		};
+	};
+
+	crypto@a0000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@a0000 {
+		reg = <0xa0000 0x20000>;
+		ranges = <0x0 0xa0000 0x20000>;
+
+		jr@1000 {
+			interrupts = <49 2 0 0>;
+		};
+		jr@2000 {
+			interrupts = <50 2 0 0>;
+		};
+	};
+
+	crypto@c0000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+	};
+
+	crypto@c0000 {
+		reg = <0xc0000 0x20000>;
+		ranges = <0x0 0xc0000 0x20000>;
+
+		jr@1000 {
+			interrupts = <55 2 0 0>;
+		};
+		jr@2000 {
+			interrupts = <56 2 0 0>;
+		};
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: ethernet@b0000 {
+		queue-group@b0000 {
+			reg = <0x10000 0x1000>;
+		};
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: ethernet@b1000 {
+		queue-group@b1000 {
+			reg = <0x11000 0x1000>;
+		};
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,c293-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi
new file mode 100644
index 000000000..065049d76
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * C293 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,C293";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,e500v2@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts
new file mode 100644
index 000000000..40ba0606e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Cyrus 5020 Device Tree Source, based on p5020ds.dts
+ *
+ * Copyright 2015 Andy Fleming
+ *
+ * p5020ds.dts copyright:
+ * Copyright 2010 - 2014 Freescale Semiconductor Inc.
+ */
+
+/include/ "p5020si-pre.dtsi"
+
+/ {
+	model = "varisys,CYRUS";
+	compatible = "varisys,CYRUS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+		};
+
+		i2c@118100 {
+		};
+
+		i2c@119100 {
+			rtc@6f {
+				compatible = "microchip,mcp7941x";
+				reg = <0x6f>;
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe203000 {
+		reg = <0xf 0xfe203000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi
new file mode 100644
index 000000000..ea145c91c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi
@@ -0,0 +1,59 @@
+/*
+ * e500mc Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.06";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-ds;		// Decorated Storage
+		power-isa-e.ed;		// Embedded.Enhanced Debug
+		power-isa-e.pd;		// Embedded.External PID
+		power-isa-e.hv;		// Embedded.Hypervisor
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-e.pc;		// Embedded.Processor Control
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-exp;		// External Proxy
+		power-isa-fp;		// Floating Point
+		power-isa-fp.r;		// Floating Point.Record
+		power-isa-mmc;		// Memory Coherence
+		power-isa-scpm;		// Store Conditional Page Mobility
+		power-isa-wt;		// Wait
+		fsl,eref-deo;		// Data Cache Extended Operations
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/e500v1_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e500v1_power_isa.dtsi
new file mode 100644
index 000000000..7e2a90cde
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/e500v1_power_isa.dtsi
@@ -0,0 +1,51 @@
+/*
+ * e500v1 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.03";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-mmc;		// Memory Coherence
+		power-isa-sp;		// Signal Processing Engine
+		power-isa-sp.fs;	// SPE.Embedded Float Scalar Single
+		power-isa-sp.fv;	// SPE.Embedded Float Vector
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi
new file mode 100644
index 000000000..f4928144d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi
@@ -0,0 +1,52 @@
+/*
+ * e500v2 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.03";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-mmc;		// Memory Coherence
+		power-isa-sp;		// Signal Processing Engine
+		power-isa-sp.fd;	// SPE.Embedded Float Scalar Double
+		power-isa-sp.fs;	// SPE.Embedded Float Scalar Single
+		power-isa-sp.fv;	// SPE.Embedded Float Vector
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi
new file mode 100644
index 000000000..c254c981a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi
@@ -0,0 +1,60 @@
+/*
+ * e5500 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.06";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-ds;		// Decorated Storage
+		power-isa-e.ed;		// Embedded.Enhanced Debug
+		power-isa-e.pd;		// Embedded.External PID
+		power-isa-e.hv;		// Embedded.Hypervisor
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-e.pc;		// Embedded.Processor Control
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-exp;		// External Proxy
+		power-isa-fp;		// Floating Point
+		power-isa-fp.r;		// Floating Point.Record
+		power-isa-mmc;		// Memory Coherence
+		power-isa-scpm;		// Store Conditional Page Mobility
+		power-isa-wt;		// Wait
+		power-isa-64;		// 64-bit
+		fsl,eref-deo;		// Data Cache Extended Operations
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi
new file mode 100644
index 000000000..a912dbeff
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi
@@ -0,0 +1,65 @@
+/*
+ * e6500 Power ISA Device Tree Source (include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	cpus {
+		power-isa-version = "2.06";
+		power-isa-b;		// Base
+		power-isa-e;		// Embedded
+		power-isa-atb;		// Alternate Time Base
+		power-isa-cs;		// Cache Specification
+		power-isa-ds;		// Decorated Storage
+		power-isa-e.ed;		// Embedded.Enhanced Debug
+		power-isa-e.pd;		// Embedded.External PID
+		power-isa-e.hv;		// Embedded.Hypervisor
+		power-isa-e.le;		// Embedded.Little-Endian
+		power-isa-e.pm;		// Embedded.Performance Monitor
+		power-isa-e.pc;		// Embedded.Processor Control
+		power-isa-ecl;		// Embedded Cache Locking
+		power-isa-exp;		// External Proxy
+		power-isa-fp;		// Floating Point
+		power-isa-fp.r;		// Floating Point.Record
+		power-isa-mmc;		// Memory Coherence
+		power-isa-scpm;		// Store Conditional Page Mobility
+		power-isa-wt;		// Wait
+		power-isa-64;		// 64-bit
+		power-isa-e.pt;		// Embedded.Page Table
+		power-isa-e.hv.lrat;	// Embedded.Hypervisor.LRAT
+		power-isa-e.em;		// Embedded Multi-Threading
+		power-isa-v;		// Vector (AltiVec)
+		fsl,eref-er;		// Enhanced Reservations (Load and Reserve and Store Cond.)
+		fsl,eref-deo;		// Data Cache Extended Operations
+		mmu-type = "power-embedded";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
new file mode 100644
index 000000000..3c210e0d5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,elo3-dma";
+	reg = <0x100300 0x4>,
+	      <0x100600 0x4>;
+	ranges = <0x0 0x100100 0x500>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		interrupts = <28 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		interrupts = <29 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		interrupts = <30 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		interrupts = <31 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		interrupts = <76 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		interrupts = <77 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		interrupts = <78 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		interrupts = <79 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
new file mode 100644
index 000000000..cccf3bb38
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,elo3-dma";
+	reg = <0x101300 0x4>,
+	      <0x101600 0x4>;
+	ranges = <0x0 0x101100 0x500>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		interrupts = <32 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		interrupts = <33 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		interrupts = <34 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		interrupts = <35 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		interrupts = <80 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		interrupts = <81 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		interrupts = <82 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		interrupts = <83 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi
new file mode 100644
index 000000000..d3cc8d0f7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi
@@ -0,0 +1,82 @@
+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma2: dma@102300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,elo3-dma";
+	reg = <0x102300 0x4>,
+	      <0x102600 0x4>;
+	ranges = <0x0 0x102100 0x500>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		interrupts = <464 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		interrupts = <465 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		interrupts = <466 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		interrupts = <467 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		interrupts = <468 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		interrupts = <469 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		interrupts = <470 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		interrupts = <471 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/ge_imp3a.dts b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts
new file mode 100644
index 000000000..9e5c01cfa
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GE IMP3A Device Tree Source
+ *
+ * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Based on: P2020 DS Device Tree Source
+ * Copyright 2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "GE_IMP3A";
+	compatible = "ge,imp3a";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0 0xfef05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xff000000 0x01000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xe8000000 0x08000000
+			  0x3 0x0 0x0 0xfc100000 0x00020000
+			  0x4 0x0 0x0 0xfc000000 0x00008000
+			  0x5 0x0 0x0 0xfc008000 0x00008000
+			  0x6 0x0 0x0 0xfee00000 0x00040000
+			  0x7 0x0 0x0 0xfee80000 0x00040000>;
+
+		/* nor@0,0 is a mirror of part of the memory in nor@1,0
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ge,imp3a-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		nor@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ge,imp3a-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "ge,imp3a-fpga-regs";
+			reg = <0x4 0x0 0x20>;
+		};
+
+		gef_pic: pic@4,20 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			device_type = "interrupt-controller";
+			compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00";
+			reg = <0x4 0x20 0x20>;
+			interrupts = <6 7 0 0>;
+		};
+
+		gef_gpio: gpio@4,400 {
+			#gpio-cells = <2>;
+			compatible = "ge,imp3a-gpio";
+			reg = <0x4 0x400 0x24>;
+			gpio-controller;
+		};
+
+		watchdog@4,800 {
+			compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x800 0x8>;
+			interrupts = <10 4>;
+			interrupt-parent = <&gef_pic>;
+		};
+
+		/* Second watchdog available, driver currently supports one.
+		watchdog@4,808 {
+			compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x808 0x8>;
+			interrupts = <9 4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		*/
+
+		nand@6,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x6 0x0 0x40000>;
+		};
+
+		nand@7,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x7 0x0 0x40000>;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0 0xfef00000 0x100000>;
+
+		i2c@3000 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x51>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+			dr_mode = "host";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0xc 0x4>;
+				reg = <0x1>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0xb 0x4>;
+				reg = <0x2>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "gmii";
+		};
+
+		enet2: ethernet@26000 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>;
+		reg = <0 0xfef08000 0 0x1000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@fef09000 {
+		reg = <0 0xfef09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+
+	};
+
+	pci2: pcie@fef0a000 {
+		reg = <0 0xfef0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
new file mode 100644
index 000000000..48a81430a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GE PPC9A Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "GEF_PPC9A";
+	compatible = "gef,ppc9a";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;	// set by uboot
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0xfef05000 0x1000>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe8000000 0x08000000	// Paged Flash 0
+			  2 0 0xe0000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00008000	// FPGA
+			  5 0 0xfc008000 0x00008000	// AFIX FPGA
+			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
+			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,ppc9a-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,ppc9a-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "gef,ppc9a-fpga-regs";
+			reg = <0x4 0x0 0x40>;
+		};
+
+		watchdog@4,2000 {
+			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2000 0x8>;
+			interrupts = <0x1a 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		/* Second watchdog available, driver currently supports one.
+		watchdog@4,2010 {
+			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2010 0x8>;
+			interrupts = <0x1b 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		*/
+		gef_pic: pic@4,4000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
+			reg = <0x4 0x4000 0x20>;
+			interrupts = <0x8 0x9 0 0>;
+
+		};
+		gef_gpio: gpio@7,14000 {
+			#gpio-cells = <2>;
+			compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio";
+			reg = <0x7 0x14000 0x24>;
+			gpio-controller;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0xfef00000 0x00100000>;
+
+		i2c@3000 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x00000051>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x9 0x4>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x8 0x4>;
+				reg = <3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@25000 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			status = "disabled";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		reg = <0xfef08000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+
+	pci1: pcie@fef09000 {
+		status = "disabled";
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
new file mode 100644
index 000000000..8eb254b17
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GE SBC310 Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "GEF_SBC310";
+	compatible = "gef,sbc310";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;	// set by uboot
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0xfef05000 0x1000>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe0000000 0x08000000	// Paged Flash 0
+			  2 0 0xe8000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00010000>;	// FPGA
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x01000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,sbc310-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "gef,fpga-regs";
+			reg = <0x4 0x0 0x40>;
+		};
+
+		watchdog@4,2000 {
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2000 0x8>;
+			interrupts = <0x1a 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+/*
+		watchdog@4,2010 {
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2010 0x8>;
+			interrupts = <0x1b 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+*/
+		gef_pic: pic@4,4000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
+			reg = <0x4 0x4000 0x20>;
+			interrupts = <0x8 0x9 0 0>;
+
+		};
+		gef_gpio: gpio@4,8000 {
+			#gpio-cells = <2>;
+			compatible = "gef,sbc310-gpio";
+			reg = <0x4 0x8000 0x24>;
+			gpio-controller;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0xfef00000 0x00100000>;
+
+		i2c@3000 {
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x00000051>;
+			};
+		};
+
+		i2c@3100 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x9 0x4>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x8 0x4>;
+				reg = <3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@25000 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			status = "disabled";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		reg = <0xfef08000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
+			0x0000 0x0 0x0 0x2 &mpic 0x1 0x2
+			0x0000 0x0 0x0 0x3 &mpic 0x2 0x2
+			0x0000 0x0 0x0 0x4 &mpic 0x3 0x2
+		>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+
+	pci1: pcie@fef09000 {
+		reg = <0xfef09000 0x1000>;
+		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0xc0000000
+				  0x02000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
new file mode 100644
index 000000000..02edbb262
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GE SBC610 Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "GEF_SBC610";
+	compatible = "gef,sbc610";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;	// set by uboot
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0xfef05000 0x1000>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe8000000 0x08000000	// Paged Flash 0
+			  2 0 0xe0000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00008000	// FPGA
+			  5 0 0xfc008000 0x00008000	// AFIX FPGA
+			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
+			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,sbc610-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "gef,fpga-regs";
+			reg = <0x4 0x0 0x40>;
+		};
+
+		watchdog@4,2000 {
+			compatible = "gef,fpga-wdt";
+			reg = <0x4 0x2000 0x8>;
+			interrupts = <0x1a 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		/* Second watchdog available, driver currently supports one.
+		watchdog@4,2010 {
+			compatible = "gef,fpga-wdt";
+			reg = <0x4 0x2010 0x8>;
+			interrupts = <0x1b 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		*/
+		gef_pic: pic@4,4000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "gef,fpga-pic";
+			reg = <0x4 0x4000 0x20>;
+			interrupts = <0x8 0x9 0 0>;
+
+		};
+		gef_gpio: gpio@7,14000 {
+			#gpio-cells = <2>;
+			compatible = "gef,sbc610-gpio";
+			reg = <0x7 0x14000 0x24>;
+			gpio-controller;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0xfef00000 0x00100000>;
+
+		i2c@3000 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x00000051>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x9 0x4>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x8 0x4>;
+				reg = <3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@25000 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			status = "disabled";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		reg = <0xfef08000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+
+	pci1: pcie@fef09000 {
+		status = "disabled";
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/kmcent2.dts b/arch/powerpc/boot/dts/fsl/kmcent2.dts
new file mode 100644
index 000000000..8e7f0828a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/kmcent2.dts
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Keymile kmcent2 Device Tree Source, based on T1040RDB DTS
+ *
+ * (C) Copyright 2016
+ * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+
+/ {
+	model = "keymile,kmcent2";
+	compatible = "keymile,kmcent2";
+
+	aliases {
+		front_phy = &front_phy;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x04000000
+			  1 0 0xf 0xfa000000 0x00010000
+			  2 0 0xf 0xfb000000 0x00010000
+			  4 0 0xf 0xc0000000 0x08000000
+			  6 0 0xf 0xd0000000 0x08000000
+			  7 0 0xf 0xd8000000 0x08000000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x04000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x1 0x0 0x10000>;
+		};
+
+		board-control@2,0 {
+			compatible = "keymile,qriox";
+			reg = <0x2 0x0 0x80>;
+		};
+
+		chassis-mgmt@6,0 {
+			compatible = "keymile,bfticu";
+			reg = <6 0 0x100>;
+			interrupt-controller;
+			interrupt-parent = <&mpic>;
+			interrupts = <11 1 0 0>;
+			#interrupt-cells = <1>;
+		};
+
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			network-clock@1 {
+				compatible = "zarlink,zl30364";
+				reg = <1>;
+				spi-max-frequency = <1000000>;
+			};
+		};
+
+		sdhc@114000 {
+			status = "disabled";
+		};
+
+		i2c@118000 {
+			clock-frequency = <100000>;
+
+			mux@70 {
+				compatible = "nxp,pca9547";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					eeprom@54 {
+						compatible = "atmel,24c02";
+						reg = <0x54>;
+						pagesize = <2>;
+						read-only;
+						label = "ddr3-spd";
+					};
+				};
+
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					temp-sensor@48 {
+						compatible = "national,lm75";
+						reg = <0x48>;
+						label = "SENSOR_0";
+					};
+					temp-sensor@4a {
+						compatible = "national,lm75";
+						reg = <0x4a>;
+						label = "SENSOR_2";
+					};
+					temp-sensor@4b {
+						compatible = "national,lm75";
+						reg = <0x4b>;
+						label = "SENSOR_3";
+					};
+				};
+			};
+		};
+
+		i2c@118100 {
+			clock-frequency = <100000>;
+
+			eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+				pagesize = <16>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+				pagesize = <16>;
+			};
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		serial2: serial@11d500 {
+			status = "disabled";
+		};
+
+		serial3: serial@11d600 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+
+		display@180000 {
+			status = "disabled";
+		};
+
+		sata@220000 {
+			status = "disabled";
+		};
+		sata@221000 {
+			status = "disabled";
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-mode = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet@e2000 {
+				phy-mode = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet@e4000 {
+				status = "disabled";
+			};
+
+			ethernet@e6000 {
+				status = "disabled";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&front_phy>;
+				phy-mode = "rgmii-id";
+			};
+
+			mdio0: mdio@fc000 {
+				front_phy: ethernet-phy@11 {
+					reg = <0x11>;
+				};
+			};
+		};
+	};
+
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		status = "disabled";
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		status = "disabled";
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		status = "disabled";
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			device_type = "hdlc";
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk9";
+			tx-clock-name = "clk9";
+			fsl,hdlc-bus;
+		};
+	};
+};
+
+#include "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/kmcoge4.dts b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
new file mode 100644
index 000000000..1c5f94231
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
+ *
+ * (C) Copyright 2014
+ * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ */
+
+/include/ "p2041si-pre.dtsi"
+
+/ {
+	model = "keymile,kmcoge4";
+	compatible = "keymile,kmcoge4", "keymile,kmp204x";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25fl256s1", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <20000000>; /* input clock */
+			};
+
+			network_clock@1 {
+				compatible = "zarlink,zl30343";
+				reg = <1>;
+				spi-max-frequency = <8000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,m25p32", "jedec,spi-nor";
+				reg = <2>;
+				spi-max-frequency = <15000000>;
+			};
+		};
+
+		sdhc@114000 {
+			status = "disabled";
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+
+		sata@220000 {
+			status = "disabled";
+		};
+
+		sata@221000 {
+			status = "disabled";
+		};
+
+		fman0: fman@400000 {
+			enet0: ethernet@e0000 {
+				phy-connection-type = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			mdio0: mdio@e1120 {
+				front_phy: ethernet-phy@11 {
+					reg = <0x11>;
+				};
+			};
+
+			enet1: ethernet@e2000 {
+				phy-connection-type = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			enet2: ethernet@e4000 {
+				status = "disabled";
+			};
+
+			enet3: ethernet@e6000 {
+				status = "disabled";
+			};
+			enet4: ethernet@e8000 {
+				phy-handle = <&front_phy>;
+				phy-connection-type = "rgmii";
+			};
+			enet5: ethernet@f0000 {
+				status = "disabled";
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		status = "disabled";
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xffa00000 0x00040000		/* LB 0 */
+			  1 0 0xf 0xfb000000 0x00010000		/* LB 1 */
+			  2 0 0xf 0xd0000000 0x10000000		/* LB 2 */
+			  3 0 0xf 0xe0000000 0x10000000>;	/* LB 3 */
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0 0 0x40000>;
+		};
+
+		board-control@1,0 {
+			compatible = "keymile,qriox";
+			reg = <1 0 0x80>;
+		};
+
+		chassis-mgmt@3,0 {
+			compatible = "keymile,bfticu";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <3 0 0x100>;
+			interrupt-parent = <&mpic>;
+			interrupts = <6 1 0 0>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts
new file mode 100644
index 000000000..ab6997a0f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8536 DS Device Tree Source
+ *
+ * Copyright 2008, 2011 Freescale Semiconductor, Inc.
+ */
+
+/include/ "mpc8536si-pre.dtsi"
+
+/ {
+	model = "fsl,mpc8536ds";
+	compatible = "fsl,mpc8536ds";
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;	// Filled by U-Boot
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000>;
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0 0xffe00000 0x100000>;
+	};
+
+	pci0: pci@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0 0 1 &mpic 1 1 0 0
+			0x8800 0 0 2 &mpic 2 1 0 0
+			0x8800 0 0 3 &mpic 3 1 0 0
+			0x8800 0 0 4 &mpic 4 1 0 0>;
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
+			  0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0x98000000
+				  0x02000000 0 0x98000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
+			  0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0x90000000
+				  0x02000000 0 0x90000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe0b000 {
+		reg = <0 0xffe0b000 0 0x1000>;
+		ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00100000>;
+		};
+	};
+};
+
+/include/ "mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
new file mode 100644
index 000000000..a925fe49a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
@@ -0,0 +1,244 @@
+/*
+ * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x03000000>;
+			label = "ramdisk-nor";
+		};
+
+		partition@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@4000000 {
+			reg = <0x04000000 0x00400000>;
+			label = "kernel-nor";
+		};
+
+		partition@4400000 {
+			reg = <0x04400000 0x03b00000>;
+			label = "fs-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			label = "dtb-nor";
+		};
+
+		partition@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8536-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		partition@0 {
+			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
+			read-only;
+		};
+
+		partition@2000000 {
+			reg = <0x02000000 0x10000000>;
+			label = "fs-nand";
+		};
+
+		partition@12000000 {
+			reg = <0x12000000 0x08000000>;
+			label = "ramdisk-nand";
+		};
+
+		partition@1a000000 {
+			reg = <0x1a000000 0x04000000>;
+			label = "kernel-nand";
+		};
+
+		partition@1e000000 {
+			reg = <0x1e000000 0x01000000>;
+			label = "dtb-nand";
+		};
+
+		partition@1f000000 {
+			reg = <0x1f000000 0x21000000>;
+			label = "empty-nand";
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,mpc8536ds-fpga-pixis";
+		reg = <0x3 0x0 0x8000>;
+	};
+};
+
+&board_soc {
+	i2c@3100 {
+		rtc@68 {
+			compatible = "dallas,ds3232";
+			reg = <0x68>;
+			interrupts = <0 0x1 0 0>;
+		};
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+			partition@u-boot {
+				label = "u-boot";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@kernel {
+				label = "kernel";
+				reg = <0x00100000 0x00500000>;
+				read-only;
+			};
+			partition@dtb {
+				label = "dtb";
+				reg = <0x00600000 0x00100000>;
+				read-only;
+			};
+			partition@fs {
+				label = "file system";
+				reg = <0x00700000 0x00900000>;
+			};
+		};
+		flash@1 {
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <1>;
+			spi-max-frequency = <40000000>;
+		};
+		flash@2 {
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <2>;
+			spi-max-frequency = <40000000>;
+		};
+		flash@3 {
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <3>;
+			spi-max-frequency = <40000000>;
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <10 0x1 0 0>;
+			reg = <0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <10 0x1 0 0>;
+			reg = <1>;
+		};
+		sgmii_phy0: sgmii-phy@0 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1d>;
+		};
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1c>;
+		};
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@26520 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,gianfar-tbi";
+		reg = <0x26520 0x20>;
+
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	usb@2b000 {
+		dr_mode = "peripheral";
+		phy_type = "ulpi";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts
new file mode 100644
index 000000000..1b799741c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8536DS Device Tree Source (36-bit address map)
+ *
+ * Copyright 2008-2009, 2011 Freescale Semiconductor, Inc.
+ */
+
+/include/ "mpc8536si-pre.dtsi"
+
+/ {
+	model = "fsl,mpc8536ds";
+	compatible = "fsl,mpc8536ds";
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;	// Filled by U-Boot
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x2 0x0 0xf 0xffa00000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
+	};
+
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pci@fffe08000 {
+		reg = <0xf 0xffe08000 0 0x1000>;
+		ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0 0 1 &mpic 1 1 0 0
+			0x8800 0 0 2 &mpic 2 1 0 0
+			0x8800 0 0 3 &mpic 3 1 0 0
+			0x8800 0 0 4 &mpic 4 1 0 0>;
+	};
+
+	pci1: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xf8000000
+				  0x02000000 0 0xf8000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xf8000000
+				  0x02000000 0 0xf8000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@fffe0b000 {
+		reg = <0xf 0xffe0b000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00100000>;
+		};
+	};
+};
+
+/include/ "mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
new file mode 100644
index 000000000..fba40a1bc
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
@@ -0,0 +1,262 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci3 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <27 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <27 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8536-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8536-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	/* mark compat w/8572 to get some erratum treatment */
+	gpio-controller@f000 {
+		compatible = "fsl,mpc8572-gpio";
+	};
+
+	sata@18000 {
+		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+		reg = <0x18000 0x1000>;
+		cell-index = <1>;
+		interrupts = <74 0x2 0 0>;
+	};
+
+	sata@19000 {
+		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+		reg = <0x19000 0x1000>;
+		cell-index = <2>;
+		interrupts = <41 0x2 0 0>;
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8536-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+	enet0: ethernet@24000 {
+		fsl,wake-on-filer;
+		fsl,pmc-handle = <&etsec1_clk>;
+	};
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+	usb@22000 {
+		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		reg = <0x22000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <28 0x2 0 0>;
+	};
+
+	usb@23000 {
+		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		reg = <0x23000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <46 0x2 0 0>;
+	};
+
+	ptp_clock@24e00 {
+		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+	};
+
+/include/ "pq3-etsec1-2.dtsi"
+	enet2: ethernet@26000 {
+		cell-index = <1>;
+		fsl,wake-on-filer;
+		fsl,pmc-handle = <&etsec3_clk>;
+	};
+
+	usb@2b000 {
+		compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+		reg = <0x2b000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <60 0x2 0 0>;
+	};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+	};
+
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8536-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+
+/include/ "pq3-power.dtsi"
+	power@e0070 {
+		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
new file mode 100644
index 000000000..152906f98
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
@@ -0,0 +1,66 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8536";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544ds.dts b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts
new file mode 100644
index 000000000..f4a8b7139
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8544 DS Device Tree Source
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ */
+
+/include/ "mpc8544si-pre.dtsi"
+
+/ {
+	model = "MPC8544DS";
+	compatible = "MPC8544DS", "MPC85xxDS";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;	// Filled by U-Boot
+	};
+
+	board_lbc: lbc: localbus@e0005000 {
+		reg = <0 0xe0005000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xff800000 0x800000>;
+	};
+
+	board_soc: soc: soc8544@e0000000 {
+		ranges = <0x0 0x0 0xe0000000 0x100000>;
+	};
+
+	pci0: pci@e0008000 {
+		reg = <0 0xe0008000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x12 J16 Slot 2 */
+
+			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>;
+	};
+
+	pci1: pcie@e0009000 {
+		reg = <0x0 0xe0009000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		reg = <0x0 0xe000a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	board_pci3: pci3: pcie@e000b000 {
+		reg = <0x0 0xe000b000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000
+			  0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xb0000000
+				  0x2000000 0x0 0xb0000000
+				  0x0 0x100000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/*
+ * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "mpc8544si-post.dtsi"
+/include/ "mpc8544ds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi
new file mode 100644
index 000000000..47d986b04
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi
@@ -0,0 +1,207 @@
+/*
+ * MPC8544DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x800000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x10000>;
+			label = "dtb-nor";
+		};
+
+		partition@20000 {
+			reg = <0x20000 0x30000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@200000 {
+			reg = <0x200000 0x200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@400000 {
+			reg = <0x400000 0x380000>;
+			label = "kernel-nor";
+		};
+
+		partition@780000 {
+			reg = <0x780000 0x80000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+};
+
+&board_soc {
+	enet0: ethernet@24000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <10 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <10 1 0 0>;
+			reg = <0x1>;
+		};
+
+		sgmii_phy0: sgmii-phy@0 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1c>;
+		};
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1d>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@26520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+};
+
+&board_pci3 {
+	pcie@0 {
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			// IDSEL 0x1c  USB
+			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+
+		uli1575@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			ranges = <0x2000000 0x0 0xb0000000
+				  0x2000000 0x0 0xb0000000
+				  0x0 0x100000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+			isa@1e {
+				device_type = "isa";
+				#interrupt-cells = <2>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <0xf000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0
+					  0x1000>;
+				interrupt-parent = <&i8259>;
+
+				i8259: interrupt-controller@20 {
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+					interrupts = <9 2 0 0>;
+					interrupt-parent = <&mpic>;
+				};
+
+				i8042@60 {
+					#size-cells = <0>;
+					#address-cells = <1>;
+					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+					interrupts = <1 3 12 3>;
+					interrupt-parent =
+						<&i8259>;
+
+					keyboard@0 {
+						reg = <0x0>;
+						compatible = "pnpPNP,303";
+					};
+
+					mouse@1 {
+						reg = <0x1>;
+						compatible = "pnpPNP,f03";
+					};
+				};
+
+				rtc@70 {
+					compatible = "pnpPNP,b00";
+					reg = <0x1 0x70 0x2>;
+				};
+
+				gpio@400 {
+					reg = <0x1 0x400 0x80>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
new file mode 100644
index 000000000..ea7416af7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
@@ -0,0 +1,193 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci3 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <27 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <27 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8544-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8544-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8544-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2, 256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+
+	ethernet@26000 {
+		cell-index = <1>;
+	};
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8544-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+
+/include/ "pq3-power.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
new file mode 100644
index 000000000..5a69bafb6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
@@ -0,0 +1,66 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8544";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8544@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
new file mode 100644
index 000000000..dddb73745
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
@@ -0,0 +1,161 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <25 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8548-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8548-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8548-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8548-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+
+/include/ "pq3-power.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
new file mode 100644
index 000000000..fc1ce9774
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
@@ -0,0 +1,67 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8548";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568mds.dts b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts
new file mode 100644
index 000000000..3603b5ae1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8568E MDS Device Tree Source
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ */
+
+/include/ "mpc8568si-pre.dtsi"
+
+/ {
+	model = "MPC8568EMDS";
+	compatible = "MPC8568EMDS", "MPC85xxMDS";
+
+	aliases {
+		pci0 = &pci0;
+		pci1 = &pci1;
+		rapidio0 = &rio;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;
+	};
+
+	lbc: localbus@e0005000 {
+		reg = <0x0 0xe0005000 0x0 0x1000>;
+		ranges = <0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0xf0000000 0x04000000
+			  0x4 0x0 0xf8008000 0x00008000
+			  0x5 0x0 0xf8010000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8568mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+
+			bcsr5: gpio-controller@11 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8568mds-bcsr-gpio";
+				reg = <0x5 0x1>;
+				gpio-controller;
+			};
+		};
+
+		pib@4,0 {
+			compatible = "fsl,mpc8568mds-pib";
+			reg = <4 0 0x8000>;
+		};
+
+		pib@5,0 {
+			compatible = "fsl,mpc8568mds-pib";
+			reg = <5 0 0x8000>;
+		};
+	};
+
+	soc: soc8568@e0000000 {
+		ranges = <0x0 0x0 0xe0000000 0x100000>;
+
+		i2c-sleep-nexus {
+			i2c@3000 {
+				rtc@68 {
+					compatible = "dallas,ds1374";
+					reg = <0x68>;
+					interrupts = <3 1 0 0>;
+				};
+			};
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@7 {
+				interrupts = <1 1 0 0>;
+				reg = <0x7>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupts = <1 1 0 0>;
+				reg = <0x2>;
+			};
+			phy3: ethernet-phy@3 {
+				interrupts = <2 1 0 0>;
+				reg = <0x3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy3>;
+			sleep = <&pmc 0x00000040>;
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		par_io@e0100 {
+			num-ports = <7>;
+
+			pio1: ucc_pin@1 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x4  0xa  0x1  0x0  0x2  0x0 	/* TxD0 */
+					0x4  0x9  0x1  0x0  0x2  0x0 	/* TxD1 */
+					0x4  0x8  0x1  0x0  0x2  0x0 	/* TxD2 */
+					0x4  0x7  0x1  0x0  0x2  0x0 	/* TxD3 */
+					0x4  0x17  0x1  0x0  0x2  0x0 	/* TxD4 */
+					0x4  0x16  0x1  0x0  0x2  0x0 	/* TxD5 */
+					0x4  0x15  0x1  0x0  0x2  0x0 	/* TxD6 */
+					0x4  0x14  0x1  0x0  0x2  0x0 	/* TxD7 */
+					0x4  0xf  0x2  0x0  0x2  0x0 	/* RxD0 */
+					0x4  0xe  0x2  0x0  0x2  0x0 	/* RxD1 */
+					0x4  0xd  0x2  0x0  0x2  0x0 	/* RxD2 */
+					0x4  0xc  0x2  0x0  0x2  0x0 	/* RxD3 */
+					0x4  0x1d  0x2  0x0  0x2  0x0 	/* RxD4 */
+					0x4  0x1c  0x2  0x0  0x2  0x0 	/* RxD5 */
+					0x4  0x1b  0x2  0x0  0x2  0x0 	/* RxD6 */
+					0x4  0x1a  0x2  0x0  0x2  0x0 	/* RxD7 */
+					0x4  0xb  0x1  0x0  0x2  0x0 	/* TX_EN */
+					0x4  0x18  0x1  0x0  0x2  0x0 	/* TX_ER */
+					0x4  0x10  0x2  0x0  0x2  0x0 	/* RX_DV */
+					0x4  0x1e  0x2  0x0  0x2  0x0 	/* RX_ER */
+					0x4  0x11  0x2  0x0  0x2  0x0 	/* RX_CLK */
+					0x4  0x13  0x1  0x0  0x2  0x0 	/* GTX_CLK */
+					0x1  0x1f  0x2  0x0  0x3  0x0>;	/* GTX125 */
+			};
+
+			pio2: ucc_pin@2 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
+					0x5  0x9 0x1  0x0  0x2  0x0   /* TxD1 */
+					0x5  0x8 0x1  0x0  0x2  0x0   /* TxD2 */
+					0x5  0x7 0x1  0x0  0x2  0x0   /* TxD3 */
+					0x5  0x17 0x1  0x0  0x2  0x0   /* TxD4 */
+					0x5  0x16 0x1  0x0  0x2  0x0   /* TxD5 */
+					0x5  0x15 0x1  0x0  0x2  0x0   /* TxD6 */
+					0x5  0x14 0x1  0x0  0x2  0x0   /* TxD7 */
+					0x5  0xf 0x2  0x0  0x2  0x0   /* RxD0 */
+					0x5  0xe 0x2  0x0  0x2  0x0   /* RxD1 */
+					0x5  0xd 0x2  0x0  0x2  0x0   /* RxD2 */
+					0x5  0xc 0x2  0x0  0x2  0x0   /* RxD3 */
+					0x5  0x1d 0x2  0x0  0x2  0x0   /* RxD4 */
+					0x5  0x1c 0x2  0x0  0x2  0x0   /* RxD5 */
+					0x5  0x1b 0x2  0x0  0x2  0x0   /* RxD6 */
+					0x5  0x1a 0x2  0x0  0x2  0x0   /* RxD7 */
+					0x5  0xb 0x1  0x0  0x2  0x0   /* TX_EN */
+					0x5  0x18 0x1  0x0  0x2  0x0   /* TX_ER */
+					0x5  0x10 0x2  0x0  0x2  0x0   /* RX_DV */
+					0x5  0x1e 0x2  0x0  0x2  0x0   /* RX_ER */
+					0x5  0x11 0x2  0x0  0x2  0x0   /* RX_CLK */
+					0x5  0x13 0x1  0x0  0x2  0x0   /* GTX_CLK */
+					0x1  0x1f 0x2  0x0  0x3  0x0   /* GTX125 */
+					0x4  0x6 0x3  0x0  0x2  0x0   /* MDIO */
+					0x4  0x5 0x1  0x0  0x2  0x0>; /* MDC */
+			};
+		};
+	};
+
+	qe: qe@e0080000 {
+		ranges = <0x0 0x0 0xe0080000 0x40000>;
+		reg = <0x0 0xe0080000 0x0 0x480>;
+
+		spi@4c0 {
+			mode = "cpu";
+		};
+
+		spi@500 {
+			mode = "cpu";
+		};
+
+		enet2: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk16";
+			pio-handle = <&pio1>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet3: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk16";
+			pio-handle = <&pio2>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			/* These are the same PHYs as on
+			 * gianfar's MDIO bus */
+			qe_phy0: ethernet-phy@7 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1 0 0>;
+				reg = <0x7>;
+			};
+			qe_phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+			qe_phy2: ethernet-phy@2 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1 0 0>;
+				reg = <0x2>;
+			};
+			qe_phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1 0 0>;
+				reg = <0x3>;
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		reg = <0x0 0xe0008000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x12 AD18 */
+			0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
+			0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
+			0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
+			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
+
+			/* IDSEL 0x13 AD19 */
+			0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
+			0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
+			0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
+	};
+
+	/* PCI Express */
+	pci1: pcie@e000a000 {
+		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
+		reg = <0x0 0xe000a000 0x0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x800000>;
+		};
+	};
+
+	rio: rapidio@e00c00000 {
+		reg = <0x0 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			gpios = <&bcsr5 1 0>;
+		};
+
+		amber {
+			gpios = <&bcsr5 2 0>;
+		};
+
+		red {
+			gpios = <&bcsr5 3 0>;
+		};
+	};
+};
+
+/include/ "mpc8568si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
new file mode 100644
index 000000000..64e7075a9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
@@ -0,0 +1,270 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+	sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8540-pci";
+	device_type = "pci";
+	interrupts = <24 0x2 0 0>;
+	bus-range = <0 0xff>;
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+	sleep = <&pmc 0x80000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+	sleep = <&pmc 0x20000000>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	sleep = <&pmc 0x00080000>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8568-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8568-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8568-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+	i2c-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000004>;
+		ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+	};
+
+	duart-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000002>;
+		ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8568-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+	dma@21300 {
+		sleep = <&pmc 0x00000400>;
+	};
+
+/include/ "pq3-etsec1-0.dtsi"
+	ethernet@24000 {
+		sleep = <&pmc 0x00000080>;
+	};
+
+/include/ "pq3-etsec1-1.dtsi"
+	ethernet@25000 {
+		sleep = <&pmc 0x00000040>;
+	};
+
+	par_io@e0100 {
+		reg = <0xe0100 0x100>;
+		device_type = "par_io";
+	};
+
+/include/ "pq3-sec2.1-0.dtsi"
+	crypto@30000 {
+		sleep = <&pmc 0x01000000>;
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+	rmu@d3000 {
+		sleep = <&pmc 0x00040000>;
+	};
+
+	global-utilities@e0000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
+		reg = <0xe0000 0x1000>;
+		ranges = <0 0xe0000 0x1000>;
+		fsl,has-rstcr;
+
+		pmc: power@70 {
+			compatible = "fsl,mpc8568-pmc",
+				     "fsl,mpc8548-pmc";
+			reg = <0x70 0x20>;
+		};
+	};
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	sleep = <&pmc 0x00000800>;
+	brg-frequency = <0>;
+	bus-frequency = <396000000>;
+	fsl,qe-num-riscs = <2>;
+	fsl,qe-num-snums = <28>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+		interrupt-parent = <&mpic>;
+	};
+
+	spi@4c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,spi";
+		reg = <0x4c0 0x40>;
+		cell-index = <0>;
+		interrupts = <2>;
+		interrupt-parent = <&qeic>;
+	};
+
+	spi@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		compatible = "fsl,spi";
+		reg = <0x500 0x40>;
+		interrupts = <1>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3000 {
+		cell-index = <2>;
+		reg = <0x3000 0x200>;
+		interrupts = <33>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x10000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+				     "fsl,cpm-muram-data";
+			reg = <0x0 0x10000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
new file mode 100644
index 000000000..122ca3bd0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8568";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8568@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+			sleep = <&pmc 0x00008000	// core
+				 &pmc 0x00004000>;	// timebase
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569mds.dts b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
new file mode 100644
index 000000000..206614ea2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts
@@ -0,0 +1,443 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8569E MDS Device Tree Source
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "mpc8569si-pre.dtsi"
+
+/ {
+	model = "MPC8569EMDS";
+	compatible = "fsl,MPC8569EMDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet5 = &enet5;
+		ethernet7 = &enet7;
+		rapidio0 = &rio;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@e0005000 {
+		reg = <0x0 0xe0005000 0x0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0x0 0xf0000000 0x04000000
+			  0x3 0x0 0x0 0xfc000000 0x00008000
+			  0x4 0x0 0x0 0xf8008000 0x00008000
+			  0x5 0x0 0x0 0xf8010000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0 {
+				label = "ramdisk";
+				reg = <0x00000000 0x01c00000>;
+			};
+			partition@1c00000 {
+				label = "kernel";
+				reg = <0x01c00000 0x002e0000>;
+			};
+			partition@1ee0000 {
+				label = "dtb";
+				reg = <0x01ee0000 0x00020000>;
+			};
+			partition@1f00000 {
+				label = "firmware";
+				reg = <0x01f00000 0x00080000>;
+				read-only;
+			};
+			partition@1f80000 {
+				label = "u-boot";
+				reg = <0x01f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8569mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+
+			bcsr17: gpio-controller@11 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569mds-bcsr-gpio";
+				reg = <0x11 0x1>;
+				gpio-controller;
+			};
+		};
+
+		nand@3,0 {
+			compatible = "fsl,mpc8569-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <3 0 0x8000>;
+		};
+
+		pib@4,0 {
+			compatible = "fsl,mpc8569mds-pib";
+			reg = <4 0 0x8000>;
+		};
+
+		pib@5,0 {
+			compatible = "fsl,mpc8569mds-pib";
+			reg = <5 0 0x8000>;
+		};
+	};
+
+	soc: soc@e0000000 {
+		ranges = <0x0 0x0 0xe0000000 0x100000>;
+
+		i2c-sleep-nexus {
+			i2c@3000 {
+				rtc@68 {
+					compatible = "dallas,ds1374";
+					reg = <0x68>;
+					interrupts = <3 1 0 0>;
+				};
+			};
+		};
+
+		sdhc@2e000 {
+			status = "disabled";
+			sdhci,1-bit-only;
+			bus-width = <1>;
+		};
+
+		par_io@e0100 {
+			num-ports = <7>;
+
+			qe_pio_e: gpio-controller@80 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0x80 0x18>;
+				gpio-controller;
+			};
+
+			qe_pio_f: gpio-controller@a0 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0xa0 0x18>;
+				gpio-controller;
+			};
+
+			pio1: ucc_pin@1 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
+					0x0  0x0  0x1  0x0  0x3  0x0	/* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x1  0x1  0x0  0x3  0x0	/* ENET1_TXD1_SER1_TXD1 */
+					0x0  0x2  0x1  0x0  0x1  0x0	/* ENET1_TXD2_SER1_TXD2 */
+					0x0  0x3  0x1  0x0  0x2  0x0	/* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x3  0x0	/* ENET1_RXD0_SER1_RXD0	*/
+					0x0  0x7  0x2  0x0  0x1  0x0	/* ENET1_RXD1_SER1_RXD1	*/
+					0x0  0x8  0x2  0x0  0x2  0x0	/* ENET1_RXD2_SER1_RXD2	*/
+					0x0  0x9  0x2  0x0  0x2  0x0	/* ENET1_RXD3_SER1_RXD3	*/
+					0x0  0x4  0x1  0x0  0x2  0x0	/* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xc  0x2  0x0  0x3  0x0	/* ENET1_RX_DV_SER1_CTS_B */
+					0x2  0x8  0x2  0x0  0x1  0x0	/* ENET1_GRXCLK	*/
+					0x2  0x14 0x1  0x0  0x2  0x0>;	/* ENET1_GTXCLK	*/
+			};
+
+			pio2: ucc_pin@2 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
+					0x0  0xe  0x1  0x0  0x2  0x0	/* ENET2_TXD0_SER2_TXD0 */
+					0x0  0xf  0x1  0x0  0x2  0x0	/* ENET2_TXD1_SER2_TXD1 */
+					0x0  0x10 0x1  0x0  0x1  0x0	/* ENET2_TXD2_SER2_TXD2 */
+					0x0  0x11 0x1  0x0  0x1  0x0	/* ENET2_TXD3_SER2_TXD3 */
+					0x0  0x14 0x2  0x0  0x2  0x0	/* ENET2_RXD0_SER2_RXD0	*/
+					0x0  0x15 0x2  0x0  0x1  0x0	/* ENET2_RXD1_SER2_RXD1	*/
+					0x0  0x16 0x2  0x0  0x1  0x0	/* ENET2_RXD2_SER2_RXD2	*/
+					0x0  0x17 0x2  0x0  0x1  0x0	/* ENET2_RXD3_SER2_RXD3	*/
+					0x0  0x12 0x1  0x0  0x2  0x0	/* ENET2_TX_EN_SER2_RTS_B */
+					0x0  0x1a 0x2  0x0  0x3  0x0	/* ENET2_RX_DV_SER2_CTS_B */
+					0x2  0x3  0x2  0x0  0x1  0x0	/* ENET2_GRXCLK	*/
+					0x2  0x2 0x1  0x0  0x2  0x0>;	/* ENET2_GTXCLK	*/
+			};
+
+			pio3: ucc_pin@3 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
+					0x0  0x1d 0x1  0x0  0x2  0x0	/* ENET3_TXD0_SER3_TXD0 */
+					0x0  0x1e 0x1  0x0  0x3  0x0	/* ENET3_TXD1_SER3_TXD1 */
+					0x0  0x1f 0x1  0x0  0x2  0x0	/* ENET3_TXD2_SER3_TXD2 */
+					0x1  0x0  0x1  0x0  0x3  0x0	/* ENET3_TXD3_SER3_TXD3 */
+					0x1  0x3  0x2  0x0  0x3  0x0	/* ENET3_RXD0_SER3_RXD0	*/
+					0x1  0x4  0x2  0x0  0x1  0x0	/* ENET3_RXD1_SER3_RXD1	*/
+					0x1  0x5  0x2  0x0  0x2  0x0	/* ENET3_RXD2_SER3_RXD2	*/
+					0x1  0x6  0x2  0x0  0x3  0x0	/* ENET3_RXD3_SER3_RXD3	*/
+					0x1  0x1  0x1  0x0  0x1  0x0	/* ENET3_TX_EN_SER3_RTS_B */
+					0x1  0x9  0x2  0x0  0x3  0x0	/* ENET3_RX_DV_SER3_CTS_B */
+					0x2  0x9  0x2  0x0  0x2  0x0	/* ENET3_GRXCLK	*/
+					0x2  0x19 0x1  0x0  0x2  0x0>;	/* ENET3_GTXCLK	*/
+			};
+
+			pio4: ucc_pin@4 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
+					0x1  0xc  0x1  0x0  0x2  0x0	/* ENET4_TXD0_SER4_TXD0 */
+					0x1  0xd  0x1  0x0  0x2  0x0	/* ENET4_TXD1_SER4_TXD1 */
+					0x1  0xe  0x1  0x0  0x1  0x0	/* ENET4_TXD2_SER4_TXD2 */
+					0x1  0xf  0x1  0x0  0x2  0x0	/* ENET4_TXD3_SER4_TXD3 */
+					0x1  0x12 0x2  0x0  0x2  0x0	/* ENET4_RXD0_SER4_RXD0	*/
+					0x1  0x13 0x2  0x0  0x1  0x0	/* ENET4_RXD1_SER4_RXD1	*/
+					0x1  0x14 0x2  0x0  0x1  0x0	/* ENET4_RXD2_SER4_RXD2	*/
+					0x1  0x15 0x2  0x0  0x2  0x0	/* ENET4_RXD3_SER4_RXD3	*/
+					0x1  0x10 0x1  0x0  0x2  0x0	/* ENET4_TX_EN_SER4_RTS_B */
+					0x1  0x18 0x2  0x0  0x3  0x0	/* ENET4_RX_DV_SER4_CTS_B */
+					0x2  0x11 0x2  0x0  0x2  0x0	/* ENET4_GRXCLK	*/
+					0x2  0x18 0x1  0x0  0x2  0x0>;	/* ENET4_GTXCLK	*/
+			};
+		};
+	};
+
+	qe: qe@e0080000 {
+		ranges = <0x0 0x0 0xe0080000 0x40000>;
+		reg = <0x0 0xe0080000 0x0 0x480>;
+
+		spi@4c0 {
+			gpios = <&qe_pio_e 30 0>;
+			mode = "cpu-qe";
+
+			serial-flash@0 {
+				compatible = "st,m25p40";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+			};
+		};
+
+		spi@500 {
+			mode = "cpu";
+		};
+
+		usb@6c0 {
+			fsl,fullspeed-clock = "clk5";
+			fsl,lowspeed-clock = "brg10";
+			gpios = <&qe_pio_f 3 0   /* USBOE */
+				 &qe_pio_f 4 0   /* USBTP */
+				 &qe_pio_f 5 0   /* USBTN */
+				 &qe_pio_f 6 0   /* USBRP */
+				 &qe_pio_f 8 0   /* USBRN */
+				 &bcsr17   1 0   /* SPEED */
+				 &bcsr17   2 0>; /* POWER */
+		};
+
+		enet0: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk12";
+			pio-handle = <&pio1>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			qe_phy0: ethernet-phy@7 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1 0 0>;
+				reg = <0x7>;
+			};
+			qe_phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+			qe_phy2: ethernet-phy@2 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1 0 0>;
+				reg = <0x2>;
+			};
+			qe_phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1 0 0>;
+				reg = <0x3>;
+			};
+			qe_phy5: ethernet-phy@4 {
+				reg = <0x04>;
+			};
+			qe_phy7: ethernet-phy@6 {
+				reg = <0x6>;
+			};
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+		mdio@3520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3520 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			tbi6: tbi-phy@15 {
+			reg = <0x15>;
+			device_type = "tbi-phy";
+			};
+		};
+		mdio@3720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3720 0x38>;
+			compatible = "fsl,ucc-mdio";
+			tbi8: tbi-phy@17 {
+				reg = <0x17>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ucc@2200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk12";
+			pio-handle = <&pio3>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&qe_phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@2320 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2320 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk17";
+			pio-handle = <&pio2>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@3120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3120 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet3: ucc@3200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk17";
+			pio-handle = <&pio4>;
+			tbi-handle = <&tbi4>;
+			phy-handle = <&qe_phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@3320 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3320 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi4: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet5: ucc@3400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "none";
+			tbi-handle = <&tbi6>;
+			phy-handle = <&qe_phy5>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet7: ucc@3600 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "none";
+			tbi-handle = <&tbi8>;
+			phy-handle = <&qe_phy7>;
+			phy-connection-type = "sgmii";
+		};
+	};
+
+	/* PCI Express */
+	pci1: pcie@e000a000 {
+		reg = <0x0 0xe000a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x800000>;
+		};
+	};
+
+	rio: rapidio@e00c00000 {
+		reg = <0x0 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+		};
+		port2 {
+			status = "disabled";
+		};
+	};
+};
+
+/include/ "mpc8569si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
new file mode 100644
index 000000000..3e6346a4a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
@@ -0,0 +1,304 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+	sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+	sleep = <&pmc 0x20000000>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	sleep = <&pmc 0x00080000>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8569-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8569-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8569-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+	i2c-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000004>;
+		ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+	};
+
+	duart-sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00000002>;
+		ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8569-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2, 512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		sleep = <&pmc 0x00200000>;
+	};
+
+	par_io@e0100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xe0100 0x100>;
+		ranges = <0x0 0xe0100 0x100>;
+		device_type = "par_io";
+	};
+
+/include/ "pq3-sec3.1-0.dtsi"
+	crypto@30000 {
+		sleep = <&pmc 0x01000000>;
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+	rmu@d3000 {
+		sleep = <&pmc 0x00040000>;
+	};
+
+	global-utilities@e0000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
+		reg = <0xe0000 0x1000>;
+		ranges = <0 0xe0000 0x1000>;
+		fsl,has-rstcr;
+
+		pmc: power@70 {
+			compatible = "fsl,mpc8569-pmc",
+				     "fsl,mpc8548-pmc";
+			reg = <0x70 0x20>;
+		};
+	};
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	sleep = <&pmc 0x00000800>;
+	brg-frequency = <0>;
+	bus-frequency = <0>;
+	fsl,qe-num-riscs = <4>;
+	fsl,qe-num-snums = <46>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+		interrupt-parent = <&mpic>;
+	};
+
+	timer@440 {
+		compatible = "fsl,mpc8569-qe-gtm",
+			     "fsl,qe-gtm", "fsl,gtm";
+		reg = <0x440 0x40>;
+		interrupts = <12 13 14 15>;
+		interrupt-parent = <&qeic>;
+		/* Filled in by U-Boot */
+		clock-frequency = <0>;
+	};
+
+	spi@4c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
+		reg = <0x4c0 0x40>;
+		cell-index = <0>;
+		interrupts = <2>;
+		interrupt-parent = <&qeic>;
+	};
+
+	spi@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		compatible = "fsl,spi";
+		reg = <0x500 0x40>;
+		interrupts = <1>;
+		interrupt-parent = <&qeic>;
+	};
+
+	usb@6c0 {
+		compatible = "fsl,mpc8569-qe-usb",
+			     "fsl,mpc8323-qe-usb";
+		reg = <0x6c0 0x40 0x8b00 0x100>;
+		interrupts = <11>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3000 {
+		cell-index = <2>;
+		reg = <0x3000 0x200>;
+		interrupts = <33>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3200 {
+		cell-index = <4>;
+		reg = <0x3200 0x200>;
+		interrupts = <35>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3400 {
+		cell-index = <6>;
+		reg = <0x3400 0x200>;
+		interrupts = <41>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@3600 {
+		cell-index = <8>;
+		reg = <0x3600 0x200>;
+		interrupts = <43>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x20000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+				     "fsl,cpm-muram-data";
+			reg = <0x0 0x20000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
new file mode 100644
index 000000000..2cd15a2a0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
@@ -0,0 +1,67 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8569";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8569@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+			sleep = <&pmc 0x00008000	// core
+				 &pmc 0x00004000>;	// timebase
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts
new file mode 100644
index 000000000..679d53c4a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8572 DS Device Tree Source
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "mpc8572si-pre.dtsi"
+
+/ {
+	model = "fsl,MPC8572DS";
+	compatible = "fsl,MPC8572DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000
+			  0x4 0x0 0x0 0xffa40000 0x00040000
+			  0x5 0x0 0x0 0xffa80000 0x00040000
+			  0x6 0x0 0x0 0xffac0000 0x00040000>;
+	};
+
+	board_soc: soc: soc8572@ffe00000 {
+		ranges = <0x0 0 0xffe00000 0x100000>;
+	};
+
+	board_pci0: pci0: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi
new file mode 100644
index 000000000..357490bb8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi
@@ -0,0 +1,428 @@
+/*
+ * MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x03000000>;
+			label = "ramdisk-nor";
+		};
+
+		partition@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@4000000 {
+			reg = <0x04000000 0x00400000>;
+			label = "kernel-nor";
+		};
+
+		partition@4400000 {
+			reg = <0x04400000 0x03b00000>;
+			label = "fs-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00060000>;
+			label = "dtb-nor";
+		};
+
+		partition@7f60000 {
+			reg = <0x07f60000 0x00020000>;
+			label = "env-nor";
+			read-only;
+		};
+
+		partition@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		partition@0 {
+			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
+			read-only;
+		};
+
+		partition@2000000 {
+			reg = <0x02000000 0x10000000>;
+			label = "fs-nand";
+		};
+
+		partition@12000000 {
+			reg = <0x12000000 0x08000000>;
+			label = "ramdisk-nand";
+		};
+
+		partition@1a000000 {
+			reg = <0x1a000000 0x04000000>;
+			label = "kernel-nand";
+		};
+
+		partition@1e000000 {
+			reg = <0x1e000000 0x01000000>;
+			label = "dtb-nand";
+		};
+
+		partition@1f000000 {
+			reg = <0x1f000000 0x21000000>;
+			label = "empty-nand";
+		};
+	};
+
+	nand@4,0 {
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x4 0x0 0x40000>;
+	};
+
+	nand@5,0 {
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x5 0x0 0x40000>;
+	};
+
+	nand@6,0 {
+		compatible = "fsl,mpc8572-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x6 0x0 0x40000>;
+	};
+};
+
+&board_soc {
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <10 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <10 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <10 1 0 0>;
+			reg = <0x2>;
+		};
+		phy3: ethernet-phy@3 {
+			interrupts = <10 1 0 0>;
+			reg = <0x3>;
+		};
+
+		sgmii_phy0: sgmii-phy@0 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1c>;
+		};
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <6 1 0 0>;
+			reg = <0x1d>;
+		};
+		sgmii_phy2: sgmii-phy@2 {
+			interrupts = <7 1 0 0>;
+			reg = <0x1e>;
+		};
+		sgmii_phy3: sgmii-phy@3 {
+			interrupts = <7 1 0 0>;
+			reg = <0x1f>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ptp_clock@24e00 {
+		fsl,tclk-period = <5>;
+		fsl,tmr-prsc = <200>;
+		fsl,tmr-add = <0xAAAAAAAB>;
+		fsl,tmr-fiper1 = <0x3B9AC9FB>;
+		fsl,tmr-fiper2 = <0x3B9AC9FB>;
+		fsl,max-adj = <499999999>;
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+
+	};
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet3: ethernet@27000 {
+		tbi-handle = <&tbi3>;
+		phy-handle = <&phy3>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	mdio@27520 {
+		tbi3: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+};
+
+&board_pci0 {
+	pcie@0 {
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x11 func 0 - PCI slot 1 */
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 1 - PCI slot 1 */
+			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 2 - PCI slot 1 */
+			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 3 - PCI slot 1 */
+			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 4 - PCI slot 1 */
+			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 5 - PCI slot 1 */
+			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 6 - PCI slot 1 */
+			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x11 func 7 - PCI slot 1 */
+			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x12 func 0 - PCI slot 2 */
+			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 1 - PCI slot 2 */
+			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 2 - PCI slot 2 */
+			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 3 - PCI slot 2 */
+			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 4 - PCI slot 2 */
+			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 5 - PCI slot 2 */
+			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 6 - PCI slot 2 */
+			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			/* IDSEL 0x12 func 7 - PCI slot 2 */
+			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+			// IDSEL 0x1c  USB
+			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+
+		uli1575@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+			isa@1e {
+				device_type = "isa";
+				#interrupt-cells = <2>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <0xf000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0
+					  0x1000>;
+				interrupt-parent = <&i8259>;
+
+				i8259: interrupt-controller@20 {
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+					interrupts = <9 2 0 0>;
+					interrupt-parent = <&mpic>;
+				};
+
+				i8042@60 {
+					#size-cells = <0>;
+					#address-cells = <1>;
+					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+					interrupts = <1 3 12 3>;
+					interrupt-parent =
+						<&i8259>;
+
+					keyboard@0 {
+						reg = <0x0>;
+						compatible = "pnpPNP,303";
+					};
+
+					mouse@1 {
+						reg = <0x1>;
+						compatible = "pnpPNP,f03";
+					};
+				};
+
+				rtc@70 {
+					compatible = "pnpPNP,b00";
+					reg = <0x1 0x70 0x2>;
+				};
+
+				gpio@400 {
+					reg = <0x1 0x400 0x80>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts
new file mode 100644
index 000000000..f2abce2bb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8572DS Device Tree Source (36-bit address map)
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "mpc8572si-pre.dtsi"
+
+/ {
+	model = "fsl,MPC8572DS";
+	compatible = "fsl,MPC8572DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x1 0x0 0xf 0xe0000000 0x08000000
+			  0x2 0x0 0xf 0xffa00000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000
+			  0x4 0x0 0xf 0xffa40000 0x00040000
+			  0x5 0x0 0xf 0xffa80000 0x00040000
+			  0x6 0x0 0xf 0xffac0000 0x00040000>;
+	};
+
+	board_soc: soc: soc8572@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	board_pci0: pci0: pcie@fffe08000 {
+		reg = <0xf 0xffe08000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci2: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts
new file mode 100644
index 000000000..d1a4993ca
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8572 DS Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0,
+ * eth1, crypto, pci0, pci1.
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "mpc8572ds.dts"
+
+/ {
+	model = "fsl,MPC8572DS";
+	compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
+
+	cpus {
+		PowerPC,8572@0 {
+		};
+		PowerPC,8572@1 {
+			status = "disabled";
+		};
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc8572@ffe00000 {
+		serial@4600 {
+			status = "disabled";
+		};
+		dma@c300 {
+			status = "disabled";
+		};
+		gpio-controller@f000 {
+		};
+		l2-cache-controller@20000 {
+			cache-size = <0x80000>;	// L2, 512K
+		};
+		ethernet@26000 {
+			status = "disabled";
+		};
+		mdio@26520 {
+			status = "disabled";
+		};
+		ethernet@27000 {
+			status = "disabled";
+		};
+		mdio@27520 {
+			status = "disabled";
+		};
+		pic@40000 {
+			protected-sources = <
+			31 32 33 37 38 39       /* enet2 enet3 */
+			76 77 78 79 26 42	/* dma2 pci2 serial*/
+			0xe4 0xe5 0xe6 0xe7	/* msi */
+			>;
+		};
+
+		msi@41600 {
+			msi-available-ranges = <0 0x80>;
+			interrupts = <
+				0xe0 0 0 0
+				0xe1 0 0 0
+				0xe2 0 0 0
+				0xe3 0 0 0>;
+		};
+		timer@42100 {
+			status = "disabled";
+		};
+	};
+	pcie@ffe0a000 {
+		status = "disabled";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts
new file mode 100644
index 000000000..63e8243ff
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8572 DS Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, dma2, eth2, eth3, pci2, msi.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "mpc8572ds.dts"
+
+/ {
+	model = "fsl,MPC8572DS";
+	compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
+
+	cpus {
+		PowerPC,8572@0 {
+			status = "disabled";
+		};
+		PowerPC,8572@1 {
+		};
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc8572@ffe00000 {
+		ecm-law@0 {
+			status = "disabled";
+		};
+		ecm@1000 {
+			status = "disabled";
+		};
+		memory-controller@2000 {
+			status = "disabled";
+		};
+		memory-controller@6000 {
+			status = "disabled";
+		};
+		i2c@3000 {
+			status = "disabled";
+		};
+		i2c@3100 {
+			status = "disabled";
+		};
+		serial@4500 {
+			status = "disabled";
+		};
+		gpio-controller@f000 {
+			status = "disabled";
+		};
+		l2-cache-controller@20000 {
+			cache-size = <0x80000>;	// L2, 512K
+		};
+		dma@21300 {
+			status = "disabled";
+		};
+		ethernet@24000 {
+			status = "disabled";
+		};
+		ptp_clock@24e00 {
+			status = "disabled";
+		};
+		ethernet@25000 {
+			status = "disabled";
+		};
+		mdio@25520 {
+			status = "disabled";
+		};
+		crypto@30000 {
+			status = "disabled";
+		};
+		pic@40000 {
+			protected-sources = <
+			18 16 10 42 45 58	/* MEM L2 mdio serial crypto */
+			29 30 34 35 36 40	/* enet0 enet1 */
+			24 25 20 21 22 23	/* pci0 pci1 dma1 */
+			43			/* i2c */
+			0x1 0x2 0x3 0x4         /* pci slot */
+			0x9 0xa 0xb 0xc         /* usb */
+			0x6 0x7 0xe 0x5         /* Audio elgacy SATA */
+			0xe0 0xe1 0xe2 0xe3	/* msi */
+			>;
+		};
+		timer@41100 {
+			status = "disabled";
+		};
+		msi@41600 {
+			msi-available-ranges = <0x80 0x80>;
+			interrupts = <
+				0xe4 0 0 0
+				0xe5 0 0 0
+				0xe6 0 0 0
+				0xe7 0 0 0>;
+		};
+		global-utilities@e0000 {
+			status = "disabled";
+		};
+	};
+	pcie@ffe08000 {
+		status = "disabled";
+	};
+	pcie@ffe09000 {
+		status = "disabled";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
new file mode 100644
index 000000000..40a6cff77
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
@@ -0,0 +1,198 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <24 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <24 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8572-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,mpc8572-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+	memory-controller@6000 {
+		compatible = "fsl,mpc8572-memory-controller";
+		reg = <0x6000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+	gpio-controller@f000 {
+		compatible = "fsl,mpc8572-gpio";
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,mpc8572-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x100000>; // L2,1M
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+	ptp_clock@24e00 {
+		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+	};
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8572-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+
+/include/ "pq3-power.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
new file mode 100644
index 000000000..28c2a862b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
@@ -0,0 +1,73 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
new file mode 100644
index 000000000..77900b924
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8641 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8641-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8641-soc", "simple-bus";
+	bus-frequency = <0>;
+
+	mcm-law@0 {
+		compatible = "fsl,mcm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	mcm@1000 {
+		compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+	serial@4600 {
+		interrupts = <28 2 0 0>;
+	};
+/include/ "pq3-dma-0.dtsi"
+	dma@21300 {
+		compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+	};
+	dma-channel@0 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+	dma-channel@80 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+	dma-channel@100 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+	dma-channel@180 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+
+/include/ "pq3-etsec1-0.dtsi"
+	ethernet@24000 {
+		model = "TSEC";
+	};
+/include/ "pq3-etsec1-1.dtsi"
+	ethernet@25000 {
+		model = "TSEC";
+	};
+/include/ "pq3-etsec1-2.dtsi"
+	ethernet@26000 {
+		model = "TSEC";
+	};
+/include/ "pq3-etsec1-3.dtsi"
+	ethernet@27000 {
+		model = "TSEC";
+	};
+
+/include/ "qoriq-mpic.dtsi"
+	msi@41600 {
+		compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+	};
+	msi@41800 {
+		compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+	};
+	msi@41a00 {
+		compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8641-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
+
+&pci0 {
+	compatible = "fsl,mpc8641-pcie";
+	device_type = "pci";
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <100000000>;
+	interrupts = <24 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <24 2 0 0>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&pci1 {
+	compatible = "fsl,mpc8641-pcie";
+	device_type = "pci";
+	#interrupt-cells = <1>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <100000000>;
+	interrupts = <25 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0x0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi
new file mode 100644
index 000000000..a9f7e79d3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8641 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mvme2500.dts b/arch/powerpc/boot/dts/fsl/mvme2500.dts
new file mode 100644
index 000000000..e0f048a03
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mvme2500.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device tree source for the Emerson/Artesyn MVME2500
+ *
+ * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Based on: P2020 DS Device Tree Source
+ * Copyright 2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "MVME2500";
+	compatible = "artesyn,MVME2500";
+
+	aliases {
+		serial2 = &serial2;
+		serial3 = &serial3;
+		serial4 = &serial4;
+		serial5 = &serial5;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+				interrupts = <8 1 0 0>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c512";
+				reg = <0x52>;
+			};
+
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+
+		};
+
+		spi0: spi@7000 {
+			fsl,espi-num-chipselects = <2>;
+
+			flash@0 {
+				compatible = "atmel,at25df641", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+			};
+			flash@1 {
+				compatible = "atmel,at25df641", "jedec,spi-nor";
+				reg = <1>;
+				spi-max-frequency = <10000000>;
+			};
+		};
+
+		usb@22000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy1: ethernet-phy@1 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <6 1 0 0>;
+				reg = <0x1>;
+			};
+
+			phy2: ethernet-phy@2 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <6 1 0 0>;
+				reg = <0x2>;
+			};
+
+			phy3: ethernet-phy@3 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+			};
+
+			phy7: ethernet-phy@7 {
+				compatible = "brcm,bcm54616S";
+				interrupts = <7 1 0 0>;
+				reg = <0x7>;
+			};
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy7>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xfff00000 0x00080000
+			  0x1 0x0 0x0 0xffc40000 0x00010000
+			  0x2 0x0 0x0 0xffc50000 0x00010000
+			  0x3 0x0 0x0 0xffc60000 0x00010000
+			  0x4 0x0 0x0 0xffc70000 0x00010000
+			  0x6 0x0 0x0 0xffc80000 0x00010000
+			  0x5 0x0 0x0 0xffdf0000 0x00008000>;
+
+		serial2: serial@1,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x1 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 2 0 0>;
+		};
+
+		serial3: serial@2,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x2 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <1 2 0 0>;
+		};
+
+		serial4: serial@3,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x3 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <2 2 0 0>;
+		};
+
+		serial5: serial@4,0 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4 0x0 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <3 2 0 0>;
+		};
+
+		mram@0,0 {
+			compatible = "everspin,mram", "mtd-ram";
+			reg = <0x0 0x0 0x80000>;
+			bank-width = <2>;
+		};
+
+		board-control@5,0 {
+			compatible = "artesyn,mvme2500-fpga";
+			reg = <0x5 0x0 0x01000>;
+		};
+
+		cpld@6,0 {
+			compatible = "artesyn,mvme2500-cpld";
+			reg = <0x6 0x0 0x10000>;
+			interrupts = <9 1 0 0>;
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/include/ "p2020si-post.dtsi"
+
+/ {
+	soc@ffe00000 {
+		serial@4600 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		sdhc@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			non-removable;
+		};
+
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/fsl/mvme7100.dts b/arch/powerpc/boot/dts/fsl/mvme7100.dts
new file mode 100644
index 000000000..bcc9dedd6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mvme7100.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device tree source for the Emerson/Artesyn MVME7100
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "MVME7100";
+	compatible = "artesyn,MVME7100";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+
+	soc: soc@f1000000 {
+		ranges = <0x00000000 0xf1000000 0x00100000>;
+
+		i2c@3000 {
+			hwmon@4c {
+				compatible = "dallas,max6649";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				status = "disabled";
+			};
+		};
+
+
+		enet0: ethernet@24000 {
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy1: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy2: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy3: ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		enet1: ethernet@25000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@26000 {
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+
+		serial1: serial@4600 {
+			status = "disabled";
+		};
+	};
+
+	lbc: localbus@f1005000 {
+		reg = <0xf1005000 0x1000>;
+
+		ranges = <0 0 0xf8000000 0x08000000	// NOR Flash (128MB)
+			  2 0 0xf2030000 0x00010000	// NAND Flash (8GB)
+			  3 0 0xf2400000 0x00080000	// MRAM (512KB)
+			  4 0 0xf2000000 0x00010000	// BCSR
+			  5 0 0xf2010000 0x00010000>;	// QUART
+
+		bcsr@4,0 {
+			compatible = "artesyn,mvme7100-bcsr";
+			reg = <4 0 0x10000>;
+		};
+
+		serial@5,1000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x1000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,2000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x2000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,3000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x3000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,4000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x4000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+	};
+
+	pci0: pcie@f1008000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@f1009000 {
+		status = "disabled";
+	};
+
+	chosen {
+		stdout-path = &serial0;
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/oca4080.dts b/arch/powerpc/boot/dts/fsl/oca4080.dts
new file mode 100644
index 000000000..17bc6f391
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/oca4080.dts
@@ -0,0 +1,145 @@
+/*
+ * OCA4080 Device Tree Source
+ *
+ * Copyright 2014 Prodrive Technologies B.V.
+ *
+ * Based on:
+ * P4080DS Device Tree Source
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p4080si-pre.dtsi"
+
+/ {
+	model = "fsl,OCA4080";
+	compatible = "fsl,OCA4080";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		i2c@118000 {
+			status = "disabled";
+		};
+
+		i2c@118100 {
+			status = "disabled";
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xef800000 0x800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe201000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe202000 {
+		status = "disabled";
+	};
+};
+
+/include/ "p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts
new file mode 100644
index 000000000..1e33d78d8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * P1010 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ */
+
+/include/ "p1010si-pre.dtsi"
+
+/ {
+	model = "fsl,P1010RDB";
+	compatible = "fsl,P1010RDB";
+
+	/include/ "p1010rdb_32b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "p1010rdb-pa.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi
new file mode 100644
index 000000000..434fb2d58
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi
@@ -0,0 +1,85 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc_nand {
+	partition@0 {
+		/* This location must not be altered  */
+		/* 1MB for u-boot Bootloader Image */
+		reg = <0x0 0x00100000>;
+		label = "NAND U-Boot Image";
+		read-only;
+	};
+
+	partition@100000 {
+		/* 1MB for DTB Image */
+		reg = <0x00100000 0x00100000>;
+		label = "NAND DTB Image";
+	};
+
+	partition@200000 {
+		/* 4MB for Linux Kernel Image */
+		reg = <0x00200000 0x00400000>;
+		label = "NAND Linux Kernel Image";
+	};
+
+	partition@600000 {
+		/* 4MB for Compressed Root file System Image */
+		reg = <0x00600000 0x00400000>;
+		label = "NAND Compressed RFS Image";
+	};
+
+	partition@a00000 {
+		/* 15MB for JFFS2 based Root file System */
+		reg = <0x00a00000 0x00f00000>;
+		label = "NAND JFFS2 Root File System";
+	};
+
+	partition@1900000 {
+		/* 7MB for User Area */
+		reg = <0x01900000 0x00700000>;
+		label = "NAND User area";
+	};
+};
+
+&phy0 {
+	interrupts = <1 1 0 0>;
+};
+
+&phy1 {
+	interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+	interrupts = <4 1 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts
new file mode 100644
index 000000000..03bd76ca8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts
@@ -0,0 +1,46 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1010si-pre.dtsi"
+
+/ {
+	model = "fsl,P1010RDB";
+	compatible = "fsl,P1010RDB";
+
+	/include/ "p1010rdb_36b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "p1010rdb-pa.dtsi"
+/include/ "p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
new file mode 100644
index 000000000..ce3346d77
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * P1010 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ */
+
+/include/ "p1010si-pre.dtsi"
+
+/ {
+	model = "fsl,P1010RDB-PB";
+	compatible = "fsl,P1010RDB-PB";
+
+	/include/ "p1010rdb_32b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+	interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+	interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+	interrupts = <1 1 0 0>;
+};
+
+/include/ "p1010si-post.dtsi"
+
+&pci0 {
+	pcie@0 {
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			/*
+			 *irq[4:5] are active-high
+			 *irq[6:7] are active-low
+			 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
new file mode 100644
index 000000000..83590354f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
@@ -0,0 +1,74 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1010si-pre.dtsi"
+
+/ {
+	model = "fsl,P1010RDB-PB";
+	compatible = "fsl,P1010RDB-PB";
+
+	/include/ "p1010rdb_36b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+	interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+	interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+	interrupts = <1 1 0 0>;
+};
+
+/include/ "p1010si-post.dtsi"
+
+&pci0 {
+	pcie@0 {
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			/*
+			 *irq[4:5] are active-high
+			 *irq[6:7] are active-low
+			 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
new file mode 100644
index 000000000..ef49a7d6c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
@@ -0,0 +1,217 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x2000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 7 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00700000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@800000 {
+			/* 20MB for JFFS2 based Root file System */
+			reg = <0x00800000 0x01400000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@1f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x01f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	ifc_nand: nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1010rdb-cpld";
+		reg = <0x3 0x0 0x0000020>;
+		bank-width = <1>;
+		device-width = <1>;
+	};
+};
+
+&board_soc {
+	i2c@3000 {
+		eeprom@50 {
+			compatible = "st,24c256", "atmel,24c256";
+			reg = <0x50>;
+		};
+
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	i2c@3100 {
+		eeprom@52 {
+			compatible = "atmel,24c01";
+			reg = <0x52>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+
+			partition@0 {
+				/* 1MB for u-boot Bootloader Image */
+				/* 1MB for Environment */
+				reg = <0x0 0x00100000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 512KB for DTB Image */
+				reg = <0x00100000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@180000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00180000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@580000 {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00580000 0x00400000>;
+				label = "SPI Flash Compressed RFSImage";
+			};
+
+			partition@980000 {
+				/* 6.5MB for JFFS2 based RFS */
+				reg = <0x00980000 0x00680000>;
+				label = "SPI Flash JFFS2 RFS";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "utmi";
+		dr_mode = "host";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			reg = <0x1>;
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <0x0>;
+		};
+
+		phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		tbi-phy@3 {
+			device_type = "tbi-phy";
+			reg = <0x3>;
+		};
+	};
+
+	mdio@25000 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0x80000016>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <199999999>;
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy2>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi
new file mode 100644
index 000000000..583a6cd05
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi
@@ -0,0 +1,79 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+memory {
+	device_type = "memory";
+};
+
+board_ifc: ifc: memory-controller@ffe1e000 {
+	/* NOR, NAND Flashes and CPLD on board */
+	ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+		  0x1 0x0 0x0 0xff800000 0x00010000
+		  0x3 0x0 0x0 0xffb00000 0x00000020>;
+	reg = <0x0 0xffe1e000 0 0x2000>;
+};
+
+board_soc: soc: soc@ffe00000 {
+	ranges = <0x0 0x0 0xffe00000 0x100000>;
+};
+
+pci0: pcie@ffe09000 {
+	reg = <0 0xffe09000 0 0x1000>;
+	ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0xa0000000
+			  0x2000000 0x0 0xa0000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};
+
+pci1: pcie@ffe0a000 {
+	reg = <0 0xffe0a000 0 0x1000>;
+	ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0x80000000
+			  0x2000000 0x0 0x80000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi
new file mode 100644
index 000000000..4d41efe00
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi
@@ -0,0 +1,79 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+memory {
+	device_type = "memory";
+};
+
+board_ifc: ifc: memory-controller@fffe1e000 {
+	/* NOR, NAND Flashes and CPLD on board */
+	ranges = <0x0 0x0 0xf 0xee000000 0x02000000
+		  0x1 0x0 0xf 0xff800000 0x00010000
+		  0x3 0x0 0xf 0xffb00000 0x00000020>;
+	reg = <0xf 0xffe1e000 0 0x2000>;
+};
+
+board_soc: soc: soc@fffe00000 {
+	ranges = <0x0 0xf 0xffe00000 0x100000>;
+};
+
+pci0: pcie@fffe09000 {
+	reg = <0xf 0xffe09000 0 0x1000>;
+	ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0xc0000000
+			  0x2000000 0x0 0xc0000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};
+
+pci1: pcie@fffe0a000 {
+	reg = <0xf 0xffe0a000 0 0x1000>;
+	ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0xc0000000
+			  0x2000000 0x0 0xc0000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
new file mode 100644
index 000000000..2d2550729
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -0,0 +1,205 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc";
+	interrupts = <16 2 0 0 19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1010-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1010-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1010-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		fsl,i2c-erratum-a004447;
+	};
+
+/include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		fsl,i2c-erratum-a004447;
+	};
+
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+	can0: can@1c000 {
+		compatible = "fsl,p1010-flexcan";
+		reg = <0x1c000 0x1000>;
+		interrupts = <48 0x2 0 0>;
+		big-endian;
+	};
+
+	can1: can@1d000 {
+		compatible = "fsl,p1010-flexcan";
+		reg = <0x1d000 0x1000>;
+		interrupts = <61 0x2 0 0>;
+		big-endian;
+	};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1010-l2-cache-controller",
+				"fsl,p1014-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p1010-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+
+/include/ "pq3-sec4.4-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+/include/ "pq3-etsec2-1.dtsi"
+/include/ "pq3-etsec2-2.dtsi"
+
+	enet0: ethernet@b0000 {
+		fsl,pmc-handle = <&etsec1_clk>;
+	};
+
+	enet1: ethernet@b1000 {
+		fsl,pmc-handle = <&etsec2_clk>;
+	};
+
+	enet2: ethernet@b2000 {
+		fsl,pmc-handle = <&etsec3_clk>;
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1010-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+
+/include/ "pq3-power.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
new file mode 100644
index 000000000..6e76f9b28
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
@@ -0,0 +1,67 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P1010";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		can0 = &can0;
+		can1 = &can1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1010@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi
new file mode 100644
index 000000000..a24699cfe
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi
@@ -0,0 +1,151 @@
+/*
+ * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* 128KB for DTB Image */
+			reg = <0x0 0x00020000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@20000 {
+			/* 3.875 MB for Linux Kernel Image */
+			reg = <0x00020000 0x003e0000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 58MB for Root file System */
+			reg = <0x00400000 0x03a00000>;
+			label = "NOR Root File System";
+		};
+
+		partition@3e00000 {
+			/* This location must not be altered  */
+			/* 1M for Vitesse 7385 Switch firmware */
+			reg = <0x3e00000 0x00100000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@3f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x03f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	*/
+	usb@23000 {
+		status = "disabled";
+		phy_type = "ulpi";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts
new file mode 100644
index 000000000..b29d1fcb5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1020 MBG-PC Device Tree Source (32-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020MBG-PC";
+	compatible = "fsl,P1020MBG-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NOR and L2 switch */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020mbg-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts
new file mode 100644
index 000000000..678d0eec2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1020 MBG-PC Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020MBG-PC";
+	compatible = "fsl,P1020MBG-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0x0 0x1000>;
+
+		/* NOR and L2 switch */
+		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
+			  0x1 0x0 0xf 0xffa00000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020mbg-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
new file mode 100644
index 000000000..a13876c05
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
@@ -0,0 +1,247 @@
+/*
+ * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cpld";
+		reg = <0x3 0x0 0x20000>;
+		read-only;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image*/
+				reg = <0x00080000 0x00080000>;
+				label = "dtb";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "kernel";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "file system";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "file system jffs2";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+	*/
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			device_type = "tbi-phy";
+			reg = <0x11>;
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts
new file mode 100644
index 000000000..8175bf6f3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts
@@ -0,0 +1,90 @@
+/*
+ * P1020 RDB-PC Device Tree Source (32-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000
+			  0x3 0x0 0x0 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts
new file mode 100644
index 000000000..01c305795
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts
@@ -0,0 +1,90 @@
+/*
+ * P1020 RDB-PC Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00040000
+			  0x3 0x0 0xf 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts
new file mode 100644
index 000000000..42e1e2fc0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * P1020 RDB-PC  Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
+ * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
+ *
+ * Please note to add "-b 0" for core0's dts compiling.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ */
+
+/include/ "p1020rdb-pc_32b.dts"
+
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	aliases {
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		PowerPC,P1020@1 {
+			status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		serial1: serial@4600 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@b0000 {
+			status = "disabled";
+		};
+
+		mpic: pic@40000 {
+			protected-sources = <
+			42 29 30 34	/* serial1, enet0-queue-group0 */
+			17 18 24 45	/* enet0-queue-group1, crypto */
+			>;
+			pic-no-reset;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts
new file mode 100644
index 000000000..da9a8e73b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * P1020 RDB-PC Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, eth0, crypto.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ */
+
+/include/ "p1020rdb-pc_32b.dts"
+
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	aliases {
+		ethernet0 = &enet0;
+		serial0 = &serial1;
+		};
+
+	cpus {
+		PowerPC,P1020@0 {
+			status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		ecm-law@0 {
+			status = "disabled";
+		};
+
+		ecm@1000 {
+			status = "disabled";
+		};
+
+		memory-controller@2000 {
+			status = "disabled";
+		};
+
+		i2c@3000 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		serial0: serial@4500 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			status = "disabled";
+		};
+
+		gpio: gpio-controller@f000 {
+			status = "disabled";
+		};
+
+		dma@21300 {
+			status = "disabled";
+		};
+
+		mdio@24000 {
+			status = "disabled";
+		};
+
+		mdio@25000 {
+			status = "disabled";
+		};
+
+		enet1: ethernet@b1000 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@b2000 {
+			status = "disabled";
+		};
+
+		usb@22000 {
+			status = "disabled";
+		};
+
+		sdhci@2e000 {
+			status = "disabled";
+		};
+
+		mpic: pic@40000 {
+			protected-sources = <
+			16 		/* ecm, mem, L2, pci0, pci1 */
+			43 42 59	/* i2c, serial0, spi */
+			47 63 62 	/* gpio, tdm */
+			20 21 22 23	/* dma */
+			03 02 		/* mdio */
+			35 36 40	/* enet1-queue-group0 */
+			51 52 67	/* enet1-queue-group1 */
+			31 32 33	/* enet2-queue-group0 */
+			25 26 27	/* enet2-queue-group1 */
+			28 72 58 	/* usb, sdhci, crypto */
+			0xb0 0xb1 0xb2	/* message */
+			0xb3 0xb4 0xb5
+			0xb6 0xb7
+			0xe0 0xe1 0xe2	/* msi */
+			0xe3 0xe4 0xe5
+			0xe6 0xe7		/* sdhci, crypto , pci */
+			>;
+			pic-no-reset;
+		};
+
+		msi@41600 {
+			status = "disabled";
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe0a000 {
+		status = "disabled";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
new file mode 100644
index 000000000..f2dc6c09b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
@@ -0,0 +1,292 @@
+/*
+ * P1020 RDB-PD Device Tree Source (32-bit address map)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PD";
+	compatible = "fsl,P1020RDB-PD";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NOR, NAND flash, L2 switch and CPLD */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffa00000 0x00020000
+			  0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 128KB for DTB Image */
+				reg = <0x0 0x00020000>;
+				label = "NOR DTB Image";
+			};
+
+			partition@20000 {
+				/* 3.875 MB for Linux Kernel Image */
+				reg = <0x00020000 0x003e0000>;
+				label = "NOR Linux Kernel Image";
+			};
+
+			partition@400000 {
+				/* 58MB for Root file System */
+				reg = <0x00400000 0x03a00000>;
+				label = "NOR Root File System";
+			};
+
+			partition@3e00000 {
+				/* This location must not be altered  */
+				/* 1M for Vitesse 7385 Switch firmware */
+				reg = <0x3e00000 0x00100000>;
+				label = "NOR Vitesse-7385 Firmware";
+				read-only;
+			};
+
+			partition@3f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x03f00000 0x00100000>;
+				label = "NOR U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1020-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@600000 {
+				/* 122MB for File System Image */
+				reg = <0x00600000 0x07a00000>;
+				label = "NAND File System Image";
+			};
+		};
+
+		cpld@2,0 {
+			compatible = "fsl,p1020rdb-pd-cpld";
+			reg = <0x2 0x0 0x20000>;
+		};
+
+		L2switch@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "vitesse-7385";
+			reg = <0x3 0x0 0x20000>;
+		};
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		spi@7000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				/* input clock */
+				spi-max-frequency = <40000000>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image*/
+					reg = <0x00080000 0x00080000>;
+					label = "SPI DTB Image";
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI Linux Kernel Image";
+				};
+
+				partition@500000 {
+					/* 11MB for FS System Image */
+					reg = <0x00500000 0x00b00000>;
+					label = "SPI File System Image";
+				};
+			};
+
+			slic@0 {
+				compatible = "zarlink,le88266";
+				reg = <1>;
+				spi-max-frequency = <8000000>;
+			};
+
+			slic@1 {
+				compatible = "zarlink,le88266";
+				reg = <2>;
+				spi-max-frequency = <8000000>;
+			};
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25000 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26000 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		ptp_clock@b0e00 {
+			compatible = "fsl,etsec-ptp";
+			reg = <0xb0e00 0xb0>;
+			interrupts = <68 2 0 0 69 2 0 0>;
+			fsl,tclk-period	= <10>;
+			fsl,tmr-prsc	= <2>;
+			fsl,tmr-add	= <0x80000016>;
+			fsl,tmr-fiper1	= <999999990>;
+			fsl,tmr-fiper2	= <99990>;
+			fsl,max-adj	= <199999999>;
+		};
+
+		enet0: ethernet@b0000 {
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@b1000 {
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi1>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet2: ethernet@b2000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb.dts b/arch/powerpc/boot/dts/fsl/p1020rdb.dts
new file mode 100644
index 000000000..1a8d81ee4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * P1020 RDB Device Tree Source
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB";
+	compatible = "fsl,P1020RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
new file mode 100644
index 000000000..703142ee6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
@@ -0,0 +1,246 @@
+/*
+ * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR (RO) Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR (RO) DTB Image";
+			read-only;
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR (RO) Linux Kernel Image";
+			read-only;
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR (RW) JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR (RO) U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND (RO) U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND (RO) DTB Image";
+			read-only;
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND (RO) Linux Kernel Image";
+			read-only;
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND (RO) Compressed RFS Image";
+			read-only;
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND (RW) JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND (RW) Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+};
+
+&board_soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "dtb";
+				read-only;
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "kernel";
+				read-only;
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "file system";
+				read-only;
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "file system jffs2";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+		dr_mode = "host";
+	};
+
+	/* USB2 is shared with localbus. It is used
+	   only in case of SPI and SD boot after
+	   appropriate device-tree fixup done by uboot */
+	usb@23000 {
+		phy_type = "ulpi";
+		dr_mode = "host";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1>;
+			reg = <0x1>;
+		};
+
+		tbi-phy@2 {
+			device_type = "tbi-phy";
+			reg = <0x2>;
+		};
+	};
+
+	mdio@25000 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts
new file mode 100644
index 000000000..fd09a1978
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * P1020 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB";
+	compatible = "fsl,P1020RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xffa00000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
new file mode 100644
index 000000000..cc4c74610
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -0,0 +1,190 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1020-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1020-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1020-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1020-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+/include/ "pq3-usb2-dr-1.dtsi"
+	usb@23000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: enet0_grp2: ethernet@b0000 {
+		fsl,pmc-handle = <&etsec1_clk>;
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: enet1_grp2: ethernet@b1000 {
+		fsl,pmc-handle = <&etsec2_clk>;
+	};
+
+/include/ "pq3-etsec2-2.dtsi"
+	enet2: enet2_grp2: ethernet@b2000 {
+		fsl,pmc-handle = <&etsec3_clk>;
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1020-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+
+/include/ "pq3-power.dtsi"
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
new file mode 100644
index 000000000..fed9c4c8d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
@@ -0,0 +1,71 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P1020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi
new file mode 100644
index 000000000..7ea85eabc
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi
@@ -0,0 +1,140 @@
+/*
+ * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x2000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* 256KB for DTB Image */
+			reg = <0x0 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@40000 {
+			/* 3.75 MB for Linux Kernel Image */
+			reg = <0x00040000 0x003c0000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 27MB for Root file System */
+			reg = <0x00400000 0x01b00000>;
+			label = "NOR Root File System";
+		};
+
+		partition@1f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x01f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <1 1 0 0>;
+			reg = <0x2>;
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	*/
+	usb@23000 {
+		status = "disabled";
+		phy_type = "ulpi";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts
new file mode 100644
index 000000000..bc03ef611
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1020 UTM-PC Device Tree Source (32-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020UTM-PC";
+	compatible = "fsl,P1020UTM-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NOR */
+		ranges = <0x0 0x0 0x0 0xec000000 0x02000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020utm-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts
new file mode 100644
index 000000000..32766f6a4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1020 UTM-PC Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020UTM-PC";
+	compatible = "fsl,P1020UTM-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0x0 0x1000>;
+
+		/* NOR */
+		ranges = <0x0 0x0 0xf 0xec000000 0x02000000
+			  0x1 0x0 0xf 0xffa00000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020utm-pc.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1021mds.dts b/arch/powerpc/boot/dts/fsl/p1021mds.dts
new file mode 100644
index 000000000..54af8de53
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021mds.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * P1021 MDS Device Tree Source
+ *
+ * Copyright 2010,2012 Freescale Semiconductor Inc.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1021";
+	compatible = "fsl,P1021MDS";
+
+	aliases {
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NAND Flash, BCSR, PMC0/1*/
+		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
+			  0x1 0x0 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0x0 0xf8010000 0x00020000
+			  0x3 0x0 0x0 0xf8020000 0x00020000>;
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x0 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 5MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00500000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@b00000 {
+				/* 6MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00600000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 14MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00e00000>;
+				label = "NAND (RW) Writable User area";
+			};
+
+			partition@1f00000 {
+				/* 1MB for microcode */
+				reg = <0x01f00000 0x00100000>;
+				label = "NAND (RO) QE Ucode";
+				read-only;
+			};
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+		};
+
+		pib@2,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <2 0 0x10000>;
+		};
+
+		pib@3,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <3 0 0x10000>;
+		};
+	};
+
+	soc: soc@ffe00000 {
+		compatible = "fsl,p1021-immr", "simple-bus";
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		spi@7000 {
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+
+				partition@u-boot {
+					label = "u-boot-spi";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel-spi";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb-spi";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system-spi";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+			dr_mode = "host";
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <1 1 0 0>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <2 1 0 0>;
+				reg = <0x1>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+			tbi-phy@5 {
+				device_type = "tbi-phy";
+				reg = <0x5>;
+			};
+		};
+
+		mdio@25000 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		ethernet@b0000 {
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		ethernet@b1000 {
+			phy-handle = <&phy4>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@b2000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		par_io@e0100 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xe0100 0x60>;
+			ranges = <0x0 0xe0100 0x60>;
+			device_type = "par_io";
+			num-ports = <3>;
+			pio1: ucc_pin@1 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
+					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+					0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+					0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+					0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+					0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+					0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+					0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+					0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+					0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+			};
+
+			pio2: ucc_pin@2 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+					0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+					0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+					0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+					0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+					0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+					0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+					0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+			};
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		status = "disabled"; /* no firmware loaded */
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1 0 0>;
+				reg = <0x0>;
+			};
+			qe_phy1: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+	};
+};
+
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
new file mode 100644
index 000000000..18f9b3160
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
@@ -0,0 +1,256 @@
+/*
+ * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 10.75MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00ac0000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@ec0000 {
+			/* This location must not be altered  */
+			/* 256KB for QE ucode firmware*/
+			reg = <0x00ec0000 0x00040000>;
+			label = "NOR QE microcode firmware";
+			read-only;
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1021-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for User Writable Area  */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "SPI Flash Compressed RFSImage";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "SPI Flash JFFS2 RFS";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0x80000016>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <199999999>;
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi2>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts
new file mode 100644
index 000000000..d2b471035
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts
@@ -0,0 +1,96 @@
+/*
+ * P1021 RDB Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1021RDB";
+	compatible = "fsl,P1021RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+                ranges = <0x0 0x0 0xffe80000 0x40000>;
+                reg = <0 0xffe80000 0 0x480>;
+                brg-frequency = <0>;
+                bus-frequency = <0>;
+        };
+};
+
+/include/ "p1021rdb-pc.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts
new file mode 100644
index 000000000..e298c29e5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts
@@ -0,0 +1,96 @@
+/*
+ * P1021 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1021RDB";
+	compatible = "fsl,P1021RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@fffe80000 {
+                ranges = <0x0 0xf 0xffe80000 0x40000>;
+                reg = <0xf 0xffe80000 0 0x480>;
+                brg-frequency = <0>;
+                bus-frequency = <0>;
+        };
+};
+
+/include/ "p1021rdb-pc.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
new file mode 100644
index 000000000..378195db9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
@@ -0,0 +1,252 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1021-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1021-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1021-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1021-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		sdhci,auto-cmd12;
+	};
+
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: enet0_grp2: ethernet@b0000 {
+		fsl,pmc-handle = <&etsec1_clk>;
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: enet1_grp2: ethernet@b1000 {
+		fsl,pmc-handle = <&etsec2_clk>;
+	};
+
+/include/ "pq3-etsec2-2.dtsi"
+	enet2: enet2_grp2: ethernet@b2000 {
+		fsl,pmc-handle = <&etsec3_clk>;
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1021-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+
+/include/ "pq3-power.dtsi"
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	fsl,qe-num-riscs = <1>;
+	fsl,qe-num-snums = <28>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	mdio@2120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x2120 0x18>;
+		compatible = "fsl,ucc-mdio";
+	};
+
+	ucc@2400 {
+		cell-index = <5>;
+		reg = <0x2400 0x200>;
+		interrupts = <40>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2600 {
+		cell-index = <7>;
+		reg = <0x2600 0x200>;
+		interrupts = <42>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x6000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+			"fsl,cpm-muram-data";
+			reg = <0x0 0x6000>;
+		};
+	};
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
new file mode 100644
index 000000000..36161b500
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
@@ -0,0 +1,71 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P1021";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1021@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1021@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1022ds.dtsi b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi
new file mode 100644
index 000000000..ddefbf64f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi
@@ -0,0 +1,239 @@
+/*
+ * P1022 DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x03000000>;
+			label = "ramdisk-nor";
+			read-only;
+		};
+
+		partition@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@4000000 {
+			reg = <0x04000000 0x00400000>;
+			label = "kernel-nor";
+			read-only;
+		};
+
+		partition@4400000 {
+			reg = <0x04400000 0x03b00000>;
+			label = "jffs2-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			label = "dtb-nor";
+			read-only;
+		};
+
+		partition@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		partition@0 {
+			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
+			read-only;
+		};
+
+		partition@2000000 {
+			reg = <0x02000000 0x10000000>;
+			label = "jffs2-nand";
+		};
+
+		partition@12000000 {
+			reg = <0x12000000 0x10000000>;
+			label = "ramdisk-nand";
+			read-only;
+		};
+
+		partition@22000000 {
+			reg = <0x22000000 0x04000000>;
+			label = "kernel-nand";
+		};
+
+		partition@26000000 {
+			reg = <0x26000000 0x01000000>;
+			label = "dtb-nand";
+			read-only;
+		};
+
+		partition@27000000 {
+			reg = <0x27000000 0x19000000>;
+			label = "reserved-nand";
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+		reg = <3 0 0x30>;
+		interrupt-parent = <&mpic>;
+		/*
+		 * IRQ8 is generated if the "EVENT" switch is pressed
+		 * and PX_CTL[EVESEL] is set to 00.
+		 */
+		interrupts = <8 0 0 0>;
+	};
+};
+
+&board_soc {
+	i2c@3100 {
+		wm8776:codec@1a {
+			compatible = "wlf,wm8776";
+			reg = <0x1a>;
+			/*
+			 * clock-frequency will be set by U-Boot if
+			 * the clock is enabled.
+			 */
+		};
+		rtc@68 {
+			compatible = "dallas,ds3232";
+			reg = <0x68>;
+			interrupts = <0x1 0x1 0 0>;
+		};
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@0 {
+				label = "u-boot-spi";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "kernel-spi";
+				reg = <0x00100000 0x00500000>;
+				read-only;
+			};
+			partition@600000 {
+				label = "dtb-spi";
+				reg = <0x00600000 0x00100000>;
+				read-only;
+			};
+			partition@700000 {
+				label = "file system-spi";
+				reg = <0x00700000 0x00900000>;
+			};
+		};
+	};
+
+	ssi@15000 {
+		fsl,mode = "i2s-slave";
+		codec-handle = <&wm8776>;
+		fsl,ssi-asynchronous;
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	usb@23000 {
+		status = "disabled";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x1>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <9 1 0 0>;
+			reg = <0x2>;
+		};
+		tbi-phy@2 {
+			device_type = "tbi-phy";
+			reg = <0x2>;
+		};
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xc01ebd3d>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <266499999>;
+	};
+
+	ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@b1000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts
new file mode 100644
index 000000000..5a7eaceb9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts
@@ -0,0 +1,103 @@
+/*
+ * P1022 DS 32-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022DS";
+	compatible = "fsl,P1022DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xff800000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000>;
+		reg = <0x0 0xffe05000 0 0x1000>;
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0x0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		reg = <0 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1022si-post.dtsi"
+/include/ "p1022ds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts
new file mode 100644
index 000000000..88063cd9e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts
@@ -0,0 +1,103 @@
+/*
+ * P1022 DS 36-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022DS";
+	compatible = "fsl,P1022DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@fffe05000 {
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x1 0x0 0xf 0xe0000000 0x08000000
+			  0x2 0x0 0xf 0xff800000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
+		reg = <0xf 0xffe05000 0 0x1000>;
+	};
+
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@fffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		reg = <0xf 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1022si-post.dtsi"
+/include/ "p1022ds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
new file mode 100644
index 000000000..4261c2f7e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
@@ -0,0 +1,188 @@
+/*
+ * P1022 RDK 32-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022RDK";
+	compatible = "fsl,P1022RDK";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		/* The P1022 RDK does not have any localbus devices */
+		status = "disabled";
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3100 {
+			wm8960:codec@1a {
+				compatible = "wlf,wm8960";
+				reg = <0x1a>;
+				/* MCLK source is a stand-alone oscillator */
+				clock-frequency = <12288000>;
+			};
+			rtc@68 {
+				compatible = "st,m41t62";
+				reg = <0x68>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+			zl6100@21 {
+				compatible = "isil,zl6100";
+				reg = <0x21>;
+			};
+			zl6100@24 {
+				compatible = "isil,zl6100";
+				reg = <0x24>;
+			};
+			zl6100@26 {
+				compatible = "isil,zl6100";
+				reg = <0x26>;
+			};
+			zl6100@29 {
+				compatible = "isil,zl6100";
+				reg = <0x29>;
+			};
+		};
+
+		spi@7000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,m25p80", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <1000000>;
+				partition@0 {
+					label = "full-spi-flash";
+					reg = <0x00000000 0x00100000>;
+				};
+			};
+		};
+
+		ssi@15000 {
+			fsl,mode = "i2s-slave";
+			codec-handle = <&wm8960>;
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			phy_type = "ulpi";
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x1>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <9 1 0 0>;
+				reg = <0x2>;
+			};
+		};
+
+		mdio@25000 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		ethernet@b0000 {
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		ethernet@b1000 {
+			phy-handle = <&phy1>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0x0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		reg = <0 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1022si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
new file mode 100644
index 000000000..6ac21e813
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -0,0 +1,252 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/*
+	 * The localbus on the P1022 is not a simple-bus because of the eLBC
+	 * pin muxing when the DIU is enabled.
+	 */
+	compatible = "fsl,p1022-elbc", "fsl,elbc";
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xa000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1022-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1022-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1022-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-dma-1.dtsi"
+	dma@c300 {
+		dma00: dma-channel@0 {
+			compatible = "fsl,ssi-dma-channel";
+		};
+		dma01: dma-channel@80 {
+			compatible = "fsl,ssi-dma-channel";
+		};
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	display: display@10000 {
+		compatible = "fsl,diu", "fsl,p1022-diu";
+		reg = <0x10000 1000>;
+		interrupts = <64 2 0 0>;
+	};
+
+	ssi@15000 {
+		compatible = "fsl,mpc8610-ssi";
+		cell-index = <0>;
+		reg = <0x15000 0x100>;
+		interrupts = <75 2 0 0>;
+		fsl,playback-dma = <&dma00>;
+		fsl,capture-dma = <&dma01>;
+		fsl,fifo-depth = <15>;
+	};
+
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1022-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+/include/ "pq3-usb2-dr-1.dtsi"
+	usb@23000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p1022-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+
+/include/ "pq3-sec3.3-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+	enet0: enet0_grp2: ethernet@b0000 {
+		fsl,wake-on-filer;
+		fsl,pmc-handle = <&etsec1_clk>;
+	};
+
+/include/ "pq3-etsec2-1.dtsi"
+	enet1: enet1_grp2: ethernet@b1000 {
+		fsl,wake-on-filer;
+		fsl,pmc-handle = <&etsec2_clk>;
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1022-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+
+/include/ "pq3-power.dtsi"
+	power@e0070 {
+		compatible = "fsl,p1022-pmc", "fsl,mpc8536-pmc",
+				"fsl,mpc8548-pmc";
+	};
+
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
new file mode 100644
index 000000000..de76ae899
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
@@ -0,0 +1,73 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P1022";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		vga = &display;
+		display = &display;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1022@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1022@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1023rdb.dts b/arch/powerpc/boot/dts/fsl/p1023rdb.dts
new file mode 100644
index 000000000..ead928364
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023rdb.dts
@@ -0,0 +1,260 @@
+/*
+ * P1023 RDB Device Tree Source
+ *
+ * Copyright 2013 - 2014 Freescale Semiconductor Inc.
+ *
+ * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1023si-pre.dtsi"
+
+/ {
+	model = "fsl,P1023";
+	compatible = "fsl,P1023RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	qportals: qman-portals@ff000000 {
+		ranges = <0x0 0xf 0xff000000 0x200000>;
+	};
+
+	bportals: bman-portals@ff200000 {
+		ranges = <0x0 0xf 0xff200000 0x200000>;
+	};
+
+	soc: soc@ff600000 {
+		ranges = <0x0 0x0 0xff600000 0x200000>;
+
+		i2c@3000 {
+			eeprom@53 {
+				compatible = "atmel,24c04";
+				reg = <0x53>;
+			};
+
+			rtc@6f {
+				compatible = "microchip,mcp7941x";
+				reg = <0x6f>;
+			};
+		};
+
+		usb@22000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+	};
+
+	lbc: localbus@ff605000 {
+		reg = <0 0xff605000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xffa00000 0x08000000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x04000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 48MB for Root File System */
+				reg = <0x00000000 0x03000000>;
+				label = "NOR Root File System";
+			};
+
+			partition@3000000 {
+				/* 1MB for DTB Image */
+				reg = <0x03000000 0x00100000>;
+				label = "NOR DTB Image";
+			};
+
+			partition@3100000 {
+				/* 14MB for Linux Kernel Image */
+				reg = <0x03100000 0x00e00000>;
+				label = "NOR Linux Kernel Image";
+			};
+
+			partition@3f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x03f00000 0x00100000>;
+				label = "NOR U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 14MB for Linux Kernel Image */
+				reg = <0x00200000 0x00e00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@1000000 {
+				/* 96MB for Root File System Image */
+				reg = <0x01000000 0x06000000>;
+				label = "NAND Root File System";
+			};
+
+			partition@7000000 {
+				/* 16MB for User Writable Area */
+				reg = <0x07000000 0x01000000>;
+				label = "NAND Writable User area";
+			};
+		};
+	};
+
+	pci0: pcie@ff60a000 {
+		reg = <0 0xff60a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		pcie@0 {
+			/* IRQ[0:3] are pulled up on board, set to active-low */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 0 1 0 0
+				0000 0 0 2 &mpic 1 1 0 0
+				0000 0 0 3 &mpic 2 1 0 0
+				0000 0 0 4 &mpic 3 1 0 0
+				>;
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	board_pci1: pci1: pcie@ff609000 {
+		reg = <0 0xff609000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			/*
+			 * IRQ[4:6] only for PCIe, set to active-high,
+			 * IRQ[7] is pulled up on board, set to active-low
+			 */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 4 2 0 0
+				0000 0 0 2 &mpic 5 2 0 0
+				0000 0 0 3 &mpic 6 2 0 0
+				0000 0 0 4 &mpic 7 1 0 0
+				>;
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ff60b000 {
+		reg = <0 0xff60b000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			/*
+			 * IRQ[8:10] are pulled up on board, set to active-low
+			 * IRQ[11] only for PCIe, set to active-high,
+			 */
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 8 1 0 0
+				0000 0 0 2 &mpic 9 1 0 0
+				0000 0 0 3 &mpic 10 1 0 0
+				0000 0 0 4 &mpic 11 2 0 0
+				>;
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
new file mode 100644
index 000000000..da6d3fc6b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
@@ -0,0 +1,307 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+	};
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+	};
+};
+
+/* controller at 0xb000 */
+&pci2 {
+	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 0 0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <29 2 0 0>;
+		cell-index = <0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <31 2 0 0>;
+		cell-index = <1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <33 2 0 0>;
+		cell-index = <2>;
+	};
+};
+
+&bportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <30 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <32 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <34 2 0 0>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p1023-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p1023-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p1023-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+	spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p1023-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+
+	crypto: crypto@300000 {
+		compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+		fsl,sec-era = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x30000 0x10000>;
+		ranges = <0 0x30000 0x10000>;
+		interrupts = <58 2 0 0>;
+
+		sec_jr0: jr@1000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x1000 0x1000>;
+			interrupts = <45 2 0 0>;
+		};
+
+		sec_jr1: jr@2000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x2000 0x1000>;
+			interrupts = <45 2 0 0>;
+		};
+
+		sec_jr2: jr@3000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x3000 0x1000>;
+			interrupts = <57 2 0 0>;
+		};
+
+		sec_jr3: jr@4000 {
+			compatible = "fsl,sec-v4.2-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+			reg = <0x4000 0x1000>;
+			interrupts = <57 2 0 0>;
+		};
+
+		rtic@6000 {
+			compatible = "fsl,sec-v4.2-rtic",
+				     "fsl,sec-v4.0-rtic";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x6000 0x100>;
+			ranges = <0x0 0x6100 0xe00>;
+
+			rtic_a: rtic-a@0 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x00 0x20 0x100 0x80>;
+			};
+
+			rtic_b: rtic-b@20 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x20 0x20 0x200 0x80>;
+			};
+
+			rtic_c: rtic-c@40 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x40 0x20 0x300 0x80>;
+			};
+
+			rtic_d: rtic-d@60 {
+				compatible = "fsl,sec-v4.2-rtic-memory",
+					     "fsl,sec-v4.0-rtic-memory";
+				reg = <0x60 0x20 0x500 0x80>;
+			};
+		};
+	};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	qman: qman@88000 {
+		compatible = "fsl,qman";
+		reg = <0x88000 0x1000>;
+		interrupts = <16 2 0 0>;
+		fsl,qman-portals = <&qportals>;
+		memory-region = <&qman_fqd &qman_pfdr>;
+	};
+
+	bman: bman@8a000 {
+		compatible = "fsl,bman";
+		reg = <0x8a000 0x1000>;
+		interrupts = <16 2 0 0>;
+		fsl,bman-portals = <&bportals>;
+		memory-region = <&bman_fbpr>;
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,p1023-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
new file mode 100644
index 000000000..132a15219
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
@@ -0,0 +1,79 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P1023";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1023@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1023@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
new file mode 100644
index 000000000..b4d05867f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
@@ -0,0 +1,228 @@
+/*
+ * P1024 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-fcm-nand",
+				 "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00f00000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1900000 {
+			/* 7MB for User Writable Area */
+			reg = <0x01900000 0x00700000>;
+			label = "NAND Writable User area";
+		};
+	};
+};
+
+&soc {
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,m25p80", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+
+			partition@0 {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "SPI U-Boot Image";
+				read-only;
+			};
+
+			partition@80000 {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "SPI DTB Image";
+			};
+
+			partition@100000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "SPI Linux Kernel Image";
+			};
+
+			partition@500000 {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "SPI Compressed RFS Image";
+			};
+
+			partition@900000 {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "SPI JFFS2 RFS";
+			};
+		};
+	};
+
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	usb@23000 {
+		status = "disabled";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <1 1 0 0>;
+			reg = <0x2>;
+		};
+	};
+
+	mdio@25000 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ethernet@b0000 {
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts
new file mode 100644
index 000000000..8b09b9d56
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts
@@ -0,0 +1,87 @@
+/*
+ * P1024 RDB 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1024RDB";
+	compatible = "fsl,P1024RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0 0x1000>;
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1024rdb.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts
new file mode 100644
index 000000000..e7093aef2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts
@@ -0,0 +1,87 @@
+/*
+ * P1024 RDB 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1024RDB";
+	compatible = "fsl,P1024RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1024rdb.dtsi"
+/include/ "p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
new file mode 100644
index 000000000..0a5434a63
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
@@ -0,0 +1,326 @@
+/*
+ * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1025-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "dtb";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "kernel";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "file system";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "file system jffs2";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+	*/
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	par_io@e0100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xe0100 0x60>;
+		ranges = <0x0 0xe0100 0x60>;
+		device_type = "par_io";
+		num-ports = <3>;
+		pio1: ucc_pin@1 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
+				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+		};
+
+		pio2: ucc_pin@2 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+		};
+
+		pio3: ucc_pin@3 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
+				0x0  0x12 0x2  0x0  0x2  0x0    /* SER7_CTS_B*/
+				0x0  0x13 0x1  0x0  0x2  0x0    /* SER7_RTS_B*/
+				0x0  0x14 0x2  0x0  0x2  0x0    /* SER7_RXD0*/
+				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
+		};
+
+		pio4: ucc_pin@4 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
+				0x0  0x1c 0x2  0x0  0x2  0x0    /* SER3_CTS_B*/
+				0x0  0x1d 0x1  0x0  0x2  0x0    /* SER3_RTS_B*/
+				0x0  0x1e 0x2  0x0  0x2  0x0    /* SER3_RXD0*/
+				0x0  0x1f 0x1  0x0  0x2  0x0>;    /* SER3_TXD0*/
+		};
+	};
+};
+
+&qe {
+	serial2: ucc@2600 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <0>;
+		rx-clock-name = "brg6";
+		tx-clock-name = "brg6";
+		pio-handle = <&pio3>;
+	};
+
+	serial3: ucc@2200 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <1>;
+		rx-clock-name = "brg2";
+		tx-clock-name = "brg2";
+		pio-handle = <&pio4>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts
new file mode 100644
index 000000000..ea33b57f8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts
@@ -0,0 +1,133 @@
+/*
+ * P1025 RDB Device Tree Source (32-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1025RDB";
+	compatible = "fsl,P1025RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		status = "disabled"; /* no firmware loaded */
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1 0 0>;
+				reg = <0x6>;
+			};
+			qe_phy1: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+	};
+};
+
+/include/ "p1025rdb.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts
new file mode 100644
index 000000000..b0ded5e8b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts
@@ -0,0 +1,93 @@
+/*
+ * P1025 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1025RDB";
+	compatible = "fsl,P1025RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@fffe80000 {
+		status = "disabled"; /* no firmware loaded */
+	};
+
+};
+
+/include/ "p1025rdb.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1025twr.dts b/arch/powerpc/boot/dts/fsl/p1025twr.dts
new file mode 100644
index 000000000..9b8863b74
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1025twr.dts
@@ -0,0 +1,95 @@
+/*
+ * P1025 TWR Device Tree Source (32-bit address map)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1025";
+	compatible = "fsl,TWR-P1025";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR Flash and SSD1289 */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x2 0x0 0x0 0xe0000000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+	};
+};
+
+/include/ "p1025twr.dtsi"
+/include/ "p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1025twr.dtsi b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi
new file mode 100644
index 000000000..ab75b8f29
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi
@@ -0,0 +1,292 @@
+/*
+ * P1025 TWR Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/{
+       aliases {
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+       };
+};
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 5.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00580000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 56.75MB for Root file System */
+			reg = <0x00600000 0x038c0000>;
+			label = "NOR Root File System";
+		};
+
+		partition@ec0000 {
+			/* This location must not be altered  */
+			/* 256KB for QE ucode firmware*/
+			reg = <0x03ec0000 0x00040000>;
+			label = "NOR QE microcode firmware";
+			read-only;
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x03f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	/* CS2 for Display */
+	display@2,0 {
+		compatible = "solomon,ssd1289fb";
+		reg = <0x2 0x0000 0x0004>;
+	};
+
+};
+
+&soc {
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@2 {
+			interrupt-parent = <&mpic>;
+			interrupts = <1 1 0 0>;
+			reg = <0x2>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	ptp_clock@b0e00 {
+		compatible = "fsl,etsec-ptp";
+		reg = <0xb0e00 0xb0>;
+		interrupts = <68 2 0 0 69 2 0 0>;
+		fsl,tclk-period	= <10>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xc0000021>;
+		fsl,tmr-fiper1	= <999999990>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <133333332>;
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		status = "disabled";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	par_io@e0100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xe0100 0x60>;
+		ranges = <0x0 0xe0100 0x60>;
+		device_type = "par_io";
+		num-ports = <3>;
+		pio1: ucc_pin@1 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
+				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+		};
+
+		pio2: ucc_pin@2 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+		};
+
+		pio3: ucc_pin@3 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
+				0x0  0x12 0x2  0x0  0x2  0x0    /* SER7_CTS_B*/
+				0x0  0x13 0x1  0x0  0x2  0x0    /* SER7_RTS_B*/
+				0x0  0x14 0x2  0x0  0x2  0x0    /* SER7_RXD0*/
+				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
+		};
+
+		pio4: ucc_pin@4 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
+				0x0  0x1c 0x2  0x0  0x2  0x0    /* SER3_CTS_B*/
+				0x0  0x1d 0x1  0x0  0x2  0x0    /* SER3_RTS_B*/
+				0x0  0x1e 0x2  0x0  0x2  0x0    /* SER3_RXD0*/
+				0x0  0x1f 0x1  0x0  0x2  0x0>;    /* SER3_TXD0*/
+		};
+	};
+};
+
+&qe {
+	enet3: ucc@2000 {
+		device_type = "network";
+		compatible = "ucc_geth";
+		rx-clock-name = "clk12";
+		tx-clock-name = "clk9";
+		pio-handle = <&pio1>;
+		phy-handle = <&qe_phy0>;
+		phy-connection-type = "mii";
+	};
+
+	mdio@2120 {
+		qe_phy0: ethernet-phy@18 {
+			interrupt-parent = <&mpic>;
+			interrupts = <4 1 0 0>;
+			reg = <0x18>;
+			device_type = "ethernet-phy";
+		};
+		qe_phy1: ethernet-phy@19 {
+			interrupt-parent = <&mpic>;
+			interrupts = <5 1 0 0>;
+			reg = <0x19>;
+			device_type = "ethernet-phy";
+		};
+		tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet4: ucc@2400 {
+		device_type = "network";
+		compatible = "ucc_geth";
+		rx-clock-name = "none";
+		tx-clock-name = "clk13";
+		pio-handle = <&pio2>;
+		phy-handle = <&qe_phy1>;
+		phy-connection-type = "rmii";
+	};
+
+	serial2: ucc@2600 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <0>;
+		rx-clock-name = "brg6";
+		tx-clock-name = "brg6";
+		pio-handle = <&pio3>;
+	};
+
+	serial3: ucc@2200 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <1>;
+		rx-clock-name = "brg2";
+		tx-clock-name = "brg2";
+		pio-handle = <&pio4>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020ds.dts b/arch/powerpc/boot/dts/fsl/p2020ds.dts
new file mode 100644
index 000000000..ae380ebe5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020ds.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * P2020 DS Device Tree Source
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "fsl,P2020DS";
+	compatible = "fsl,P2020DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000
+			  0x4 0x0 0x0 0xffa40000 0x00040000
+			  0x5 0x0 0x0 0xffa80000 0x00040000
+			  0x6 0x0 0x0 0xffac0000 0x00040000>;
+		reg = <0 0xffe05000 0 0x1000>;
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci2: pcie@ffe08000 {
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		reg = <0 0xffe08000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	board_pci1: pci1: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci0: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/*
+ * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "p2020si-post.dtsi"
+/include/ "p2020ds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p2020ds.dtsi b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi
new file mode 100644
index 000000000..e699cf95b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi
@@ -0,0 +1,327 @@
+/*
+ * P2020DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		ramdisk@0 {
+			reg = <0x0 0x03000000>;
+			read-only;
+		};
+
+		diagnostic@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			read-only;
+		};
+
+		dink@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			read-only;
+		};
+
+		kernel@4000000 {
+			reg = <0x04000000 0x00400000>;
+			read-only;
+		};
+
+		jffs2@4400000 {
+			reg = <0x04400000 0x03b00000>;
+		};
+
+		dtb@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			read-only;
+		};
+
+		u-boot@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		u-boot@0 {
+			reg = <0x0 0x02000000>;
+			read-only;
+		};
+
+		jffs2@2000000 {
+			reg = <0x02000000 0x10000000>;
+		};
+
+		ramdisk@12000000 {
+			reg = <0x12000000 0x08000000>;
+			read-only;
+		};
+
+		kernel@1a000000 {
+			reg = <0x1a000000 0x04000000>;
+		};
+
+		dtb@1e000000 {
+			reg = <0x1e000000 0x01000000>;
+			read-only;
+		};
+
+		empty@1f000000 {
+			reg = <0x1f000000 0x21000000>;
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+		reg = <0x3 0x0 0x30>;
+	};
+
+	nand@4,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x4 0x0 0x40000>;
+	};
+
+	nand@5,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x5 0x0 0x40000>;
+	};
+
+	nand@6,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x6 0x0 0x40000>;
+	};
+};
+
+&board_soc {
+	usb@22000 {
+		phy_type = "ulpi";
+		dr_mode = "host";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <3 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <3 1 0 0>;
+			reg = <0x2>;
+		};
+
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <5 1 0 0>;
+			reg = <0x1c>;
+		};
+		sgmii_phy2: sgmii-phy@2 {
+			interrupts = <5 1 0 0>;
+			reg = <0x1d>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+
+	};
+
+	ptp_clock@24e00 {
+		fsl,tclk-period = <5>;
+		fsl,tmr-prsc = <200>;
+		fsl,tmr-add = <0xCCCCCCCD>;
+		fsl,tmr-fiper1 = <0x3B9AC9FB>;
+		fsl,tmr-fiper2 = <0x0001869B>;
+		fsl,max-adj = <249999999>;
+	};
+
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+
+&board_pci1 {
+	pcie@0 {
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			// IDSEL 0x11 func 0 - PCI slot 1
+			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 1 - PCI slot 1
+			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 2 - PCI slot 1
+			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 3 - PCI slot 1
+			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 4 - PCI slot 1
+			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 5 - PCI slot 1
+			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 6 - PCI slot 1
+			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 7 - PCI slot 1
+			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+		uli1575@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+			isa@1e {
+				device_type = "isa";
+				#interrupt-cells = <2>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <0xf000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0
+					  0x1000>;
+				interrupt-parent = <&i8259>;
+
+				i8259: interrupt-controller@20 {
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+					interrupts = <4 1 0 0>;
+					interrupt-parent = <&mpic>;
+				};
+
+				i8042@60 {
+					#size-cells = <0>;
+					#address-cells = <1>;
+					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+					interrupts = <1 3 12 3>;
+					interrupt-parent =
+						<&i8259>;
+
+					keyboard@0 {
+						reg = <0x0>;
+						compatible = "pnpPNP,303";
+					};
+
+					mouse@1 {
+						reg = <0x1>;
+						compatible = "pnpPNP,f03";
+					};
+				};
+
+				rtc@70 {
+					compatible = "pnpPNP,b00";
+					reg = <0x1 0x70 0x2>;
+				};
+
+				gpio@400 {
+					reg = <0x1 0x400 0x80>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
new file mode 100644
index 000000000..03c9afc82
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
@@ -0,0 +1,241 @@
+/*
+ * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p2020-fcm-nand",
+				 "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cpld";
+		reg = <0x3 0x0 0x20000>;
+		read-only;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,m25p80", "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+
+			partition@0 {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "SPI U-Boot Image";
+				read-only;
+			};
+
+			partition@80000 {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "SPI DTB Image";
+			};
+
+			partition@100000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "SPI Linux Kernel Image";
+			};
+
+			partition@500000 {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "SPI Compressed RFS Image";
+			};
+
+			partition@900000 {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "SPI JFFS2 RFS";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+			};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+			};
+	};
+
+	mdio@25520 {
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26520 {
+		status = "disabled";
+	};
+
+	ptp_clock@24e00 {
+		fsl,tclk-period	= <5>;
+		fsl,tmr-prsc	= <2>;
+		fsl,tmr-add	= <0xaaaaaaab>;
+		fsl,tmr-fiper1	= <999999995>;
+		fsl,tmr-fiper2	= <99990>;
+		fsl,max-adj	= <299999999>;
+	};
+
+	enet0: ethernet@24000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@26000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts
new file mode 100644
index 000000000..d3295c204
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts
@@ -0,0 +1,96 @@
+/*
+ * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "fsl,P2020RDB";
+	compatible = "fsl,P2020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR and NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000
+			  0x3 0x0 0x0 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci2: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci0: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p2020rdb-pc.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts
new file mode 100644
index 000000000..9307a8f41
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts
@@ -0,0 +1,96 @@
+/*
+ * P2020 RDB-PC 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "fsl,P2020RDB";
+	compatible = "fsl,P2020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR and NAND Flashes */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000
+			  0x3 0x0 0xf 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci2: pcie@fffe08000 {
+		reg = <0xf 0xffe08000 0 0x1000>;
+		status = "disabled";
+	};
+
+	pci1: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci0: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p2020rdb-pc.dtsi"
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb.dts b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
new file mode 100644
index 000000000..3acd3890b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * P2020 RDB Device Tree Source
+ *
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
+ */
+
+/include/ "p2020si-pre.dtsi"
+
+/ {
+	model = "fsl,P2020RDB";
+	compatible = "fsl,P2020RDB";
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR and NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 256KB for Vitesse 7385 Switch firmware */
+				reg = <0x0 0x00040000>;
+				label = "NOR (RO) Vitesse-7385 Firmware";
+				read-only;
+			};
+
+			partition@40000 {
+				/* 256KB for DTB Image */
+				reg = <0x00040000 0x00040000>;
+				label = "NOR (RO) DTB Image";
+				read-only;
+			};
+
+			partition@80000 {
+				/* 3.5 MB for Linux Kernel Image */
+				reg = <0x00080000 0x00380000>;
+				label = "NOR (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@400000 {
+				/* 11MB for JFFS2 based Root file System */
+				reg = <0x00400000 0x00b00000>;
+				label = "NOR (RW) JFFS2 Root File System";
+			};
+
+			partition@f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x00f00000 0x00100000>;
+				label = "NOR (RO) U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p2020-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 4MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00400000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@a00000 {
+				/* 7MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00700000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 15MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00f00000>;
+				label = "NAND (RW) Writable User area";
+			};
+		};
+
+		L2switch@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "vitesse-7385";
+			reg = <0x2 0x0 0x20000>;
+		};
+
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		spi@7000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image */
+					reg = <0x00080000 0x00080000>;
+					label = "SPI (RO) DTB Image";
+					read-only;
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI (RO) Linux Kernel Image";
+					read-only;
+				};
+
+				partition@500000 {
+					/* 4MB for Compressed RFS Image */
+					reg = <0x00500000 0x00400000>;
+					label = "SPI (RO) Compressed RFS Image";
+					read-only;
+				};
+
+				partition@900000 {
+					/* 7MB for JFFS2 based RFS */
+					reg = <0x00900000 0x00700000>;
+					label = "SPI (RW) JFFS2 RFS";
+				};
+			};
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+			dr_mode = "host";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1 0 0>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <3 1 0 0>;
+				reg = <0x1>;
+			};
+			tbi-phy@2 {
+				device_type = "tbi-phy";
+				reg = <0x2>;
+			};
+		};
+
+		mdio@25520 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		ptp_clock@24e00 {
+			fsl,tclk-period = <5>;
+			fsl,tmr-prsc = <200>;
+			fsl,tmr-add = <0xCCCCCCCD>;
+			fsl,tmr-fiper1 = <0x3B9AC9FB>;
+			fsl,tmr-fiper2 = <0x0001869B>;
+			fsl,max-adj = <249999999>;
+		};
+
+		enet0: ethernet@24000 {
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet2: ethernet@26000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
new file mode 100644
index 000000000..d410082d2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
@@ -0,0 +1,218 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <26 2 0 0>;
+	law_trgt_if = <2>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <26 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0x9000 */
+&pci1 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <25 2 0 0>;
+	law_trgt_if = <1>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
+
+/* controller at 0x8000 */
+&pci2 {
+	compatible = "fsl,mpc8548-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	clock-frequency = <33333333>;
+	interrupts = <24 2 0 0>;
+	law_trgt_if = <0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <24 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+			>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,p2020-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,p2020-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,p2020-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <18 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,p2020-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x80000>; // L2,512K
+		interrupts = <16 2 0 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
+/include/ "pq3-etsec1-0.dtsi"
+	enet0: ethernet@24000 {
+		fsl,pmc-handle = <&etsec1_clk>;
+
+	};
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+	ptp_clock@24e00 {
+		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>;
+	};
+
+
+/include/ "pq3-etsec1-1.dtsi"
+	enet1: ethernet@25000 {
+		fsl,pmc-handle = <&etsec2_clk>;
+	};
+
+/include/ "pq3-etsec1-2.dtsi"
+	enet2: ethernet@26000 {
+		fsl,pmc-handle = <&etsec3_clk>;
+	};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+	};
+
+/include/ "pq3-sec3.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+	global-utilities@e0000 {
+		compatible = "fsl,p2020-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+
+/include/ "pq3-power.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
new file mode 100644
index 000000000..42bf3c6d2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
@@ -0,0 +1,72 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P2020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041rdb.dts b/arch/powerpc/boot/dts/fsl/p2041rdb.dts
new file mode 100644
index 000000000..950816b9d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041rdb.dts
@@ -0,0 +1,340 @@
+/*
+ * P2041RDB Device Tree Source
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p2041si-pre.dtsi"
+
+/ {
+	model = "fsl,P2041RDB";
+	compatible = "fsl,P2041RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_2 = &phy_sgmii_2;
+		phy_sgmii_3 = &phy_sgmii_3;
+		phy_sgmii_4 = &phy_sgmii_4;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xgmii_2 = &phy_xgmii_2;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118000 {
+			lm75b@48 {
+				compatible = "nxp,lm75a";
+				reg = <0x48>;
+			};
+			eeprom@50 {
+				compatible = "atmel,24c256";
+				reg = <0x50>;
+			};
+			rtc@68 {
+				compatible = "pericom,pt7c4338";
+				reg = <0x68>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@118100 {
+			eeprom@50 {
+				compatible = "atmel,24c256";
+				reg = <0x50>;
+			};
+		};
+
+		usb1: usb@211000 {
+			dr_mode = "host";
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@e1120 {
+				phy_rgmii_0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				phy_rgmii_1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+
+				phy_sgmii_2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+
+				phy_sgmii_3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+
+				phy_sgmii_4: ethernet-phy@4 {
+					reg = <0x4>;
+				};
+
+				phy_sgmii_1c: ethernet-phy@1c {
+					reg = <0x1c>;
+				};
+
+				phy_sgmii_1d: ethernet-phy@1d {
+					reg = <0x1d>;
+				};
+
+				phy_sgmii_1e: ethernet-phy@1e {
+					reg = <0x1e>;
+				};
+
+				phy_sgmii_1f: ethernet-phy@1f {
+					reg = <0x1f>;
+				};
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_3>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_4>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_2>;
+				phy-connection-type = "xgmii";
+			};
+
+			mdio@f1000 {
+				phy_xgmii_2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  1 0 0xf 0xffa00000 0x00040000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x01000000>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
new file mode 100644
index 000000000..ddc018d42
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -0,0 +1,458 @@
+/*
+ * P2041/P2040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&lbc {
+	compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,p2041-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+};
+
+/include/ "qoriq-bman1-portals.dtsi"
+
+/include/ "qoriq-qman1-portals.dtsi"
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+		ranges = <0 0x20000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		fsl,portid-mapping = <0x0f000000>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+/include/ "qoriq-clockgen1.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p2041-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,p2041-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+	i2c@118000 {
+		fsl,i2c-erratum-a004447;
+	};
+
+	i2c@118100 {
+		fsl,i2c-erratum-a004447;
+	};
+
+/include/ "qoriq-i2c-1.dtsi"
+	i2c@119000 {
+		fsl,i2c-erratum-a004447;
+	};
+
+	i2c@119100 {
+		fsl,i2c-erratum-a004447;
+	};
+
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+		phy_type = "utmi";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		port0;
+	};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+
+/include/ "qoriq-sec4.2-0.dtsi"
+crypto: crypto@300000 {
+		fsl,iommu-parent = <&pamu1>;
+	};
+
+/include/ "qoriq-qman1.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
new file mode 100644
index 000000000..6318962e8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -0,0 +1,130 @@
+/*
+ * P2041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P2041";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e500mc@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&clockgen 1 2>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e500mc@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&clockgen 1 3>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3041ds.dts b/arch/powerpc/boot/dts/fsl/p3041ds.dts
new file mode 100644
index 000000000..ca0e0272a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041ds.dts
@@ -0,0 +1,394 @@
+/*
+ * P3041DS Device Tree Source
+ *
+ * Copyright 2010 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p3041si-pre.dtsi"
+
+/ {
+	model = "fsl,P3041DS";
+	compatible = "fsl,P3041DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xgmii_1 = &phy_xgmii_1;
+		phy_xgmii_2 = &phy_xgmii_2;
+		emi1_rgmii = &hydra_mdio_rgmii;
+		emi1_sgmii = &hydra_mdio_sgmii;
+		emi2_xgmii = &hydra_mdio_xgmii;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <35000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118100 {
+			eeprom@51 {
+				compatible = "atmel,24c256";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c@119100 {
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+			ina220@44 {
+				compatible = "ti,ina220";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+			ina220@45 {
+				compatible = "ti,ina220";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_1c>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_1d>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_1e>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_sgmii_1f>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_1>;
+				phy-connection-type = "xgmii";
+			};
+
+			hydra_mdio_xgmii: mdio@f1000 {
+				status = "disabled";
+
+				phy_xgmii_1: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x4>;
+				};
+
+				phy_xgmii_2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x21000000>;
+			};
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
+			ranges = <0 3 0 0x30>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <9 1>;
+				mux-mask = <0x78>;
+
+				hydra_mdio_rgmii: rgmii-mdio@8 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <8>;
+					status = "disabled";
+
+					phy_rgmii_0: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy_rgmii_1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				hydra_mdio_sgmii: sgmii-mdio@28 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x28>;
+					status = "disabled";
+
+					phy_sgmii_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe203000 {
+		reg = <0xf 0xfe203000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p3041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
new file mode 100644
index 000000000..81bc75aca
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -0,0 +1,469 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&lbc {
+	compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x203000 */
+&pci3 {
+	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 12>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 12>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,p3041-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+};
+
+/include/ "qoriq-bman1-portals.dtsi"
+
+/include/ "qoriq-qman1-portals.dtsi"
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+		ranges = <0 0x20000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		fsl,portid-mapping = <0x0f000000>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+/include/ "qoriq-clockgen1.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p3041-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,p3041-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
+		phy_type = "utmi";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		port0;
+	};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+
+/include/ "qoriq-sec4.2-0.dtsi"
+crypto: crypto@300000 {
+		fsl,iommu-parent = <&pamu1>;
+	};
+
+/include/ "qoriq-qman1.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
new file mode 100644
index 000000000..db92f1151
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -0,0 +1,131 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P3041";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e500mc@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&clockgen 1 2>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e500mc@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&clockgen 1 3>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p4080ds.dts b/arch/powerpc/boot/dts/fsl/p4080ds.dts
new file mode 100644
index 000000000..969b32c4f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080ds.dts
@@ -0,0 +1,439 @@
+/*
+ * P4080DS Device Tree Source
+ *
+ * Copyright 2009 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p4080si-pre.dtsi"
+
+/ {
+	model = "fsl,P4080DS";
+	compatible = "fsl,P4080DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		phy_rgmii = &phyrgmii;
+		phy5_slot3 = &phy5slot3;
+		phy6_slot3 = &phy6slot3;
+		phy7_slot3 = &phy7slot3;
+		phy8_slot3 = &phy8slot3;
+		emi1_slot3 = &p4080mdio2;
+		emi1_slot4 = &p4080mdio1;
+		emi1_slot5 = &p4080mdio3;
+		emi1_rgmii = &p4080mdio0;
+		emi2_slot4 = &p4080xmdio1;
+		emi2_slot5 = &p4080xmdio3;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118100 {
+			eeprom@51 {
+				compatible = "atmel,spd";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "atmel,spd";
+				reg = <0x52>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@118000 {
+			zl2006@21 {
+				compatible = "zl2006";
+				reg = <0x21>;
+			};
+			zl2006@22 {
+				compatible = "zl2006";
+				reg = <0x22>;
+			};
+			zl2006@23 {
+				compatible = "zl2006";
+				reg = <0x23>;
+			};
+			zl2006@24 {
+				compatible = "zl2006";
+				reg = <0x24>;
+			};
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+			eeprom@55 {
+				compatible = "atmel,24c64";
+				reg = <0x55>;
+			};
+			eeprom@56 {
+				compatible = "atmel,24c64";
+				reg = <0x56>;
+			};
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+			};
+		};
+
+		i2c@119100 {
+			/* 0x6E: ICS9FG108 */
+		};
+
+		usb0: usb@210000 {
+			phy_type = "ulpi";
+		};
+
+		usb1: usb@211000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy1>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy2>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy3>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy10>;
+				phy-connection-type = "xgmii";
+			};
+		};
+
+		fman@500000 {
+			ethernet@e0000 {
+				phy-handle = <&phy5>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy6>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy7>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy8>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy11>;
+				phy-connection-type = "xgmii";
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	mdio-mux-emi1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "mdio-mux-gpio", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		gpios = <&gpio0 1 0>, <&gpio0 0 0>;
+
+		p4080mdio0: mdio@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			phyrgmii: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+		};
+
+		p4080mdio1: mdio@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			phy5: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy6: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy7: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy8: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		p4080mdio2: mdio@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			status = "disabled";
+
+			phy5slot3: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy6slot3: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy7slot3: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy8slot3: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		p4080mdio3: mdio@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			phy0: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy1: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy2: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy3: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	mdio-mux-emi2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "mdio-mux-gpio", "mdio-mux";
+		mdio-parent-bus = <&xmdio0>;
+		gpios = <&gpio0 3 0>, <&gpio0 2 0>;
+
+		p4080xmdio1: mdio@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			phy11: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x0>;
+			};
+		};
+
+		p4080xmdio3: mdio@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			phy10: ethernet-phy@4 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x4>;
+			};
+		};
+	};
+};
+
+/include/ "p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
new file mode 100644
index 000000000..4da49b6dd
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -0,0 +1,492 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10 0>;
+};
+
+&lbc {
+	compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,p4080-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@44000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu4>;
+		reg = <0x44000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@45000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu5>;
+		reg = <0x45000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@46000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu6>;
+		reg = <0x46000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@47000 {
+		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu7>;
+		reg = <0x47000 0x1000>;
+	};
+
+};
+
+/include/ "qoriq-bman1-portals.dtsi"
+
+/include/ "qoriq-qman1-portals.dtsi"
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */
+		ranges = <0 0x20000 0x5000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		fsl,portid-mapping = <0x00f80000>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu4: pamu@4000 {
+			reg = <0x4000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-rmu-0.dtsi"
+	rmu@d3000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x540>; /* RMULIODNR */
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+/include/ "qoriq-clockgen1.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p4080-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,p4080-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		voltage-ranges = <3300 3300>;
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		port0;
+	};
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+	};
+/include/ "qoriq-sec4.0-0.dtsi"
+crypto: crypto@300000 {
+		fsl,iommu-parent = <&pamu1>;
+	};
+
+/include/ "qoriq-qman1.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@f0000 {
+		};
+	};
+
+/include/ "qoriq-fman-1.dtsi"
+/include/ "qoriq-fman-1-1g-0.dtsi"
+/include/ "qoriq-fman-1-1g-1.dtsi"
+/include/ "qoriq-fman-1-1g-2.dtsi"
+/include/ "qoriq-fman-1-1g-3.dtsi"
+/include/ "qoriq-fman-1-10g-0.dtsi"
+	fman@500000 {
+		enet5: ethernet@e0000 {
+		};
+
+		enet6: ethernet@e2000 {
+		};
+
+		enet7: ethernet@e4000 {
+		};
+
+		enet8: ethernet@e6000 {
+		};
+
+		enet9: ethernet@f0000 {
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
new file mode 100644
index 000000000..0a7c65a00
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -0,0 +1,175 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500mc_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P4080";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500mc@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e500mc@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e500mc@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&clockgen 1 2>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e500mc@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&clockgen 1 3>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu4: PowerPC,e500mc@4 {
+			device_type = "cpu";
+			reg = <4>;
+			clocks = <&clockgen 1 4>;
+			next-level-cache = <&L2_4>;
+			fsl,portid-mapping = <0x08000000>;
+			L2_4: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu5: PowerPC,e500mc@5 {
+			device_type = "cpu";
+			reg = <5>;
+			clocks = <&clockgen 1 5>;
+			next-level-cache = <&L2_5>;
+			fsl,portid-mapping = <0x04000000>;
+			L2_5: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu6: PowerPC,e500mc@6 {
+			device_type = "cpu";
+			reg = <6>;
+			clocks = <&clockgen 1 6>;
+			next-level-cache = <&L2_6>;
+			fsl,portid-mapping = <0x02000000>;
+			L2_6: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu7: PowerPC,e500mc@7 {
+			device_type = "cpu";
+			reg = <7>;
+			clocks = <&clockgen 1 7>;
+			next-level-cache = <&L2_7>;
+			fsl,portid-mapping = <0x01000000>;
+			L2_7: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020ds.dts b/arch/powerpc/boot/dts/fsl/p5020ds.dts
new file mode 100644
index 000000000..b24adf902
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020ds.dts
@@ -0,0 +1,394 @@
+/*
+ * P5020DS Device Tree Source
+ *
+ * Copyright 2010 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p5020si-pre.dtsi"
+
+/ {
+	model = "fsl,P5020DS";
+	compatible = "fsl,P5020DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xgmii_1 = &phy_xgmii_1;
+		phy_xgmii_2 = &phy_xgmii_2;
+		emi1_rgmii = &hydra_mdio_rgmii;
+		emi1_sgmii = &hydra_mdio_sgmii;
+		emi2_xgmii = &hydra_mdio_xgmii;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118100 {
+			eeprom@51 {
+				compatible = "atmel,24c256";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c@119100 {
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+			ina220@44 {
+				compatible = "ti,ina220";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+			ina220@45 {
+				compatible = "ti,ina220";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_1c>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_1d>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_1e>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_sgmii_1f>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_1>;
+				phy-connection-type = "xgmii";
+			};
+
+			hydra_mdio_xgmii: mdio@f1000 {
+				status = "disabled";
+
+				phy_xgmii_1: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x4>;
+				};
+
+				phy_xgmii_2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x21000000>;
+			};
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x30>;
+			ranges = <0 3 0 0x30>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <9 1>;
+				mux-mask = <0x78>;
+
+				hydra_mdio_rgmii: rgmii-mdio@8 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <8>;
+					status = "disabled";
+
+					phy_rgmii_0: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy_rgmii_1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				hydra_mdio_sgmii: sgmii-mdio@28 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x28>;
+					status = "disabled";
+
+					phy_sgmii_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe203000 {
+		reg = <0xf 0xfe203000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
new file mode 100644
index 000000000..cd008cdd2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -0,0 +1,478 @@
+/*
+ * P5020/5010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&lbc {
+	compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x203000 */
+&pci3 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 12>;
+	fsl,iommu-parent = <&pamu0>;
+	fsl,liodn-reg = <&guts 0x50c>; /* PEX4LIODNR */
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 12>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,iommu-parent = <&pamu0>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,p5020-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+};
+
+/include/ "qoriq-bman1-portals.dtsi"
+
+/include/ "qoriq-qman1-portals.dtsi"
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
+		ranges = <0 0x20000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		fsl,portid-mapping = <0x3c000000>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+/include/ "qoriq-clockgen1.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p5020-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,p5020-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		phy_type = "utmi";
+		port0;
+	};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+/include/ "qoriq-sec4.2-0.dtsi"
+	crypto@300000 {
+		fsl,iommu-parent = <&pamu1>;
+	};
+
+/include/ "qoriq-qman1.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-raid1.0-0.dtsi"
+	raideng@320000 {
+		fsl,iommu-parent = <&pamu1>;
+	};
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
new file mode 100644
index 000000000..2d74ea85e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -0,0 +1,117 @@
+/*
+ * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P5020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+
+		raideng = &raideng;
+		raideng_jr0 = &raideng_jr0;
+		raideng_jr1 = &raideng_jr1;
+		raideng_jr2 = &raideng_jr2;
+		raideng_jr3 = &raideng_jr3;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5040ds.dts b/arch/powerpc/boot/dts/fsl/p5040ds.dts
new file mode 100644
index 000000000..5cfc689ee
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5040ds.dts
@@ -0,0 +1,486 @@
+/*
+ * P5040DS Device Tree Source
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+/include/ "p5040si-pre.dtsi"
+
+/ {
+	model = "fsl,P5040DS";
+	compatible = "fsl,P5040DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		phy_sgmii_slot2_1c = &phy_sgmii_slot2_1c;
+		phy_sgmii_slot2_1d = &phy_sgmii_slot2_1d;
+		phy_sgmii_slot2_1e = &phy_sgmii_slot2_1e;
+		phy_sgmii_slot2_1f = &phy_sgmii_slot2_1f;
+		phy_sgmii_slot3_1c = &phy_sgmii_slot3_1c;
+		phy_sgmii_slot3_1d = &phy_sgmii_slot3_1d;
+		phy_sgmii_slot3_1e = &phy_sgmii_slot3_1e;
+		phy_sgmii_slot3_1f = &phy_sgmii_slot3_1f;
+		phy_sgmii_slot5_1c = &phy_sgmii_slot5_1c;
+		phy_sgmii_slot5_1d = &phy_sgmii_slot5_1d;
+		phy_sgmii_slot5_1e = &phy_sgmii_slot5_1e;
+		phy_sgmii_slot5_1f = &phy_sgmii_slot5_1f;
+		phy_sgmii_slot6_1c = &phy_sgmii_slot6_1c;
+		phy_sgmii_slot6_1d = &phy_sgmii_slot6_1d;
+		phy_sgmii_slot6_1e = &phy_sgmii_slot6_1e;
+		phy_sgmii_slot6_1f = &phy_sgmii_slot6_1f;
+		hydra_rg = &hydra_rg;
+		hydra_sg_slot2 = &hydra_sg_slot2;
+		hydra_sg_slot3 = &hydra_sg_slot3;
+		hydra_sg_slot5 = &hydra_sg_slot5;
+		hydra_sg_slot6 = &hydra_sg_slot6;
+		hydra_xg_slot1 = &hydra_xg_slot1;
+		hydra_xg_slot2 = &hydra_xg_slot2;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot";
+					reg = <0x00000000 0x00100000>;
+				};
+				partition@kernel {
+					label = "kernel";
+					reg = <0x00100000 0x00500000>;
+				};
+				partition@dtb {
+					label = "dtb";
+					reg = <0x00600000 0x00100000>;
+				};
+				partition@fs {
+					label = "file system";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		i2c@118100 {
+			eeprom@51 {
+				compatible = "atmel,24c256";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c@119100 {
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+			ina220@44 {
+				compatible = "ti,ina220";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+			ina220@45 {
+				compatible = "ti,ina220";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_slot_2>;
+				phy-connection-type = "xgmii";
+			};
+		};
+
+		fman@500000 {
+			ethernet@e0000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_slot_1>;
+				phy-connection-type = "xgmii";
+			};
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				label = "NAND U-Boot Image";
+				reg = <0x0 0x02000000>;
+			};
+
+			partition@2000000 {
+				label = "NAND Root File System";
+				reg = <0x02000000 0x10000000>;
+			};
+
+			partition@12000000 {
+				label = "NAND Compressed RFS Image";
+				reg = <0x12000000 0x08000000>;
+			};
+
+			partition@1a000000 {
+				label = "NAND Linux Kernel Image";
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			partition@1e000000 {
+				label = "NAND DTB Image";
+				reg = <0x1e000000 0x01000000>;
+			};
+
+			partition@1f000000 {
+				label = "NAND Writable User area";
+				reg = <0x1f000000 0x01000000>;
+			};
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis";
+			reg = <3 0 0x40>;
+			ranges = <0 3 0 0x40>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <9 1>;
+				mux-mask = <0x78>;
+
+				hydra_rg:rgmii-mdio@8 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <8>;
+					status = "disabled";
+
+					phy_rgmii_0: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy_rgmii_1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				hydra_sg_slot2: sgmii-mdio@28 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x28>;
+					status = "disabled";
+
+					phy_sgmii_slot2_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot2_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot2_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot2_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				hydra_sg_slot3: sgmii-mdio@68 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x68>;
+					status = "disabled";
+
+					phy_sgmii_slot3_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot3_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot3_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot3_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				hydra_sg_slot5: sgmii-mdio@38 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x38>;
+					status = "disabled";
+
+					phy_sgmii_slot5_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot5_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot5_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot5_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+				hydra_sg_slot6: sgmii-mdio@48 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x48>;
+					status = "disabled";
+
+					phy_sgmii_slot6_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot6_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot6_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot6_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
+
+			mdio-mux-emi2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&xmdio0>;
+				reg = <9 1>;
+				mux-mask = <0x06>;
+
+				hydra_xg_slot1: hydra-xg-slot1@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					status = "disabled";
+
+					phy_xgmii_slot_1: ethernet-phy@0 {
+						compatible = "ethernet-phy-ieee802.3-c45";
+						reg = <4>;
+					};
+				};
+
+				hydra_xg_slot2: hydra-xg-slot2@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					phy_xgmii_slot_2: ethernet-phy@4 {
+						compatible = "ethernet-phy-ieee802.3-c45";
+						reg = <0>;
+					};
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p5040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
new file mode 100644
index 000000000..16b454b50
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -0,0 +1,462 @@
+/*
+ * P5040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&lbc {
+	compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus";
+	interrupts = <25 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,p5040-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p5040-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p5040-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p5040-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p5040-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@42000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x42000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@43000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x43000 0x1000>;
+	};
+};
+
+/include/ "qoriq-bman1-portals.dtsi"
+
+/include/ "qoriq-qman1-portals.dtsi"
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p5040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */
+		ranges = <0 0x20000 0x5000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <24 2 0 0
+			      16 2 1 30>;
+		fsl,portid-mapping = <0x0f800000>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu3: pamu@3000 {
+			reg = <0x3000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu4: pamu@4000 {
+			reg = <0x4000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,p5040-device-config", "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,p5040-pin-control", "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+/include/ "qoriq-clockgen1.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,p5040-rcpm", "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p5040-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p5040-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+
+/include/ "qoriq-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,p5040-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu2>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu4>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		phy_type = "utmi";
+		port0;
+	};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu4>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu4>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu4>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+
+/include/ "qoriq-sec5.2-0.dtsi"
+	crypto@300000 {
+		fsl,iommu-parent = <&pamu4>;
+	};
+
+/include/ "qoriq-raid1.0-0.dtsi"
+/include/ "qoriq-qman1.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+/include/ "qoriq-fman-0-10g-0.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@f0000 {
+		};
+	};
+
+/include/ "qoriq-fman-1.dtsi"
+/include/ "qoriq-fman-1-1g-0.dtsi"
+/include/ "qoriq-fman-1-1g-1.dtsi"
+/include/ "qoriq-fman-1-1g-2.dtsi"
+/include/ "qoriq-fman-1-1g-3.dtsi"
+/include/ "qoriq-fman-1-1g-4.dtsi"
+/include/ "qoriq-fman-1-10g-0.dtsi"
+	fman@500000 {
+		enet6: ethernet@e0000 {
+		};
+
+		enet7: ethernet@e2000 {
+		};
+
+		enet8: ethernet@e4000 {
+		};
+
+		enet9: ethernet@e6000 {
+		};
+
+		enet10: ethernet@e8000 {
+		};
+
+		enet11: ethernet@f0000 {
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
new file mode 100644
index 000000000..ed89dbbda
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -0,0 +1,143 @@
+/*
+ * P5040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,P5040";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		sdhc = &sdhc;
+		msi0 = &msi0;
+		msi1 = &msi1;
+		msi2 = &msi2;
+
+		crypto = &crypto;
+		sec_jr0 = &sec_jr0;
+		sec_jr1 = &sec_jr1;
+		sec_jr2 = &sec_jr2;
+		sec_jr3 = &sec_jr3;
+		rtic_a = &rtic_a;
+		rtic_b = &rtic_b;
+		rtic_c = &rtic_c;
+		rtic_d = &rtic_d;
+		sec_mon = &sec_mon;
+
+		raideng = &raideng;
+		raideng_jr0 = &raideng_jr0;
+		raideng_jr1 = &raideng_jr1;
+		raideng_jr2 = &raideng_jr2;
+		raideng_jr3 = &raideng_jr3;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
+		ethernet10 = &enet10;
+		ethernet11 = &enet11;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
+			L2_0: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e5500@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&clockgen 1 2>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e5500@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&clockgen 1 3>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/ppa8548.dts b/arch/powerpc/boot/dts/fsl/ppa8548.dts
new file mode 100644
index 000000000..f39838d93
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/ppa8548.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PPA8548 Device Tree Source (36-bit address map)
+ * Copyright 2013 Prodrive B.V.
+ *
+ * Based on:
+ * MPC8548 CDS Device Tree Source (36-bit address map)
+ * Copyright 2012 Freescale Semiconductor Inc.
+ */
+
+/include/ "mpc8548si-pre.dtsi"
+
+/ {
+	model = "ppa8548";
+	compatible = "ppa8548";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0x0 0x40000000>;
+	};
+
+	lbc: localbus@fe0005000 {
+		reg = <0xf 0xe0005000 0 0x1000>;
+		ranges = <0x0 0x0 0xf 0xff800000 0x00800000>;
+	};
+
+	soc: soc8548@fe0000000 {
+		ranges = <0 0xf 0xe0000000 0x100000>;
+	};
+
+	pci0: pci@fe0008000 {
+		/* ppa8548 board doesn't support PCI */
+		status = "disabled";
+	};
+
+	pci1: pci@fe0009000 {
+		/* ppa8548 board doesn't support PCI */
+		status = "disabled";
+	};
+
+	pci2: pcie@fe000a000 {
+		/* ppa8548 board doesn't support PCI */
+		status = "disabled";
+	};
+
+	rio: rapidio@fe00c0000 {
+		reg = <0xf 0xe00c0000 0x0 0x11000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>;
+		};
+	};
+};
+
+&lbc {
+	nor@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x00800000>;
+		bank-width = <2>;
+		device-width = <2>;
+
+		partition@0 {
+			reg = <0x0 0x7A0000>;
+			label = "user";
+		};
+
+		partition@7A0000 {
+			reg = <0x7A0000 0x20000>;
+			label = "env";
+			read-only;
+		};
+
+		partition@7C0000 {
+			reg = <0x7C0000 0x40000>;
+			label = "u-boot";
+			read-only;
+		};
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@6f {
+			compatible = "intersil,isl1208";
+			reg = <0x6f>;
+		};
+	};
+
+	i2c@3100 {
+	};
+
+	/*
+	 * Only ethernet controller @25000 and @26000 are used.
+	 * Use alias enet2 and enet3 for the remainig controllers,
+	 * to stay compatible with mpc8548si-pre.dtsi.
+	 */
+	enet2: ethernet@24000 {
+		status = "disabled";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <7 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <8 1 0 0>;
+			reg = <0x1>;
+		};
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy0>;
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet1: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy1>;
+	};
+
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet3: ethernet@27000 {
+		status = "disabled";
+	};
+
+	mdio@27520 {
+		tbi3: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	crypto@30000 {
+		status = "disabled";
+	};
+};
+
+/include/ "mpc8548si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
new file mode 100644
index 000000000..b5b37ad30
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0x21000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@21300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0x21300 0x4>;
+	ranges = <0x0 0x21100 0x200>;
+	cell-index = <0>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <20 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <21 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <22 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <23 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
new file mode 100644
index 000000000..28cb8a55d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0xc300 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@c300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0xc300 0x4>;
+	ranges = <0x0 0xc100 0x200>;
+	cell-index = <1>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <76 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <77 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <78 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <79 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
new file mode 100644
index 000000000..5e268fdb9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * PQ3 DUART device tree stub [ controller @ offset 0x4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@4500 {
+	cell-index = <0>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x4500 0x100>;
+	clock-frequency = <0>;
+	interrupts = <42 2 0 0>;
+};
+
+serial1: serial@4600 {
+	cell-index = <1>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x4600 0x100>;
+	clock-frequency = <0>;
+	interrupts = <42 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
new file mode 100644
index 000000000..5743433e2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc@2e000 {
+	compatible = "fsl,esdhc";
+	reg = <0x2e000 0x1000>;
+	interrupts = <72 0x2 0 0>;
+	/* Filled in by U-Boot */
+	clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
new file mode 100644
index 000000000..75854b2e0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@7000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,mpc8536-espi";
+	reg = <0x7000 0x1000>;
+	interrupts = <59 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
new file mode 100644
index 000000000..3b0650a98
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
@@ -0,0 +1,54 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@24000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x24000 0x1000>;
+	ranges = <0x0 0x24000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+};
+
+mdio@24520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-mdio";
+	reg = <0x24520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
new file mode 100644
index 000000000..96693b41f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
@@ -0,0 +1,54 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@25000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x25000 0x1000>;
+	ranges = <0x0 0x25000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+};
+
+mdio@25520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x25520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
new file mode 100644
index 000000000..6b3fab19d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
@@ -0,0 +1,54 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@26000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <2>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x26000 0x1000>;
+	ranges = <0x0 0x26000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+};
+
+mdio@26520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x26520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
new file mode 100644
index 000000000..0da592d93
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
@@ -0,0 +1,54 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@27000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <3>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "gianfar";
+	reg = <0x27000 0x1000>;
+	ranges = <0x0 0x27000 0x1000>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
+};
+
+mdio@27520 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,gianfar-tbi";
+	reg = <0x27520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
new file mode 100644
index 000000000..efe2ca04b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ptp_clock@24e00 {
+	compatible = "fsl,etsec-ptp";
+	reg = <0x24e00 0xb0>;
+	interrupts = <68 2 0 0 69 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
new file mode 100644
index 000000000..7fcb1ac0f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
@@ -0,0 +1,61 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@24000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,etsec2-mdio";
+	reg = <0x24000 0x1000 0xb0030 0x4>;
+};
+
+ethernet@b0000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "fsl,etsec2";
+	fsl,num_rx_queues = <0x8>;
+	fsl,num_tx_queues = <0x8>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
+
+	queue-group@b0000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb0000 0x1000>;
+		interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
new file mode 100644
index 000000000..9f25427c1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
@@ -0,0 +1,61 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@25000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,etsec2-tbi";
+	reg = <0x25000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b1000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "fsl,etsec2";
+	fsl,num_rx_queues = <0x8>;
+	fsl,num_tx_queues = <0x8>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
+
+	queue-group@b1000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb1000 0x1000>;
+		interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
new file mode 100644
index 000000000..cd7c318ab
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mdio@26000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,etsec2-tbi";
+	reg = <0x26000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b2000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "network";
+	model = "eTSEC";
+	compatible = "fsl,etsec2";
+	fsl,num_rx_queues = <0x8>;
+	fsl,num_tx_queues = <0x8>;
+	fsl,magic-packet;
+	local-mac-address = [ 00 00 00 00 00 00 ];
+	ranges;
+
+	queue-group@b2000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb2000 0x1000>;
+		interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
new file mode 100644
index 000000000..034ab8fac
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet0_grp2 {
+	queue-group@b4000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb4000 0x1000>;
+		interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
new file mode 100644
index 000000000..3be9ba3b3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet1_grp2 {
+	queue-group@b5000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb5000 0x1000>;
+		interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
new file mode 100644
index 000000000..02a334570
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet2_grp2 {
+	queue-group@b6000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xb6000 0x1000>;
+		interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
new file mode 100644
index 000000000..a1b48546b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 GPIO device tree stub [ controller @ offset 0xfc00 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio-controller@fc00 {
+	#gpio-cells = <2>;
+	compatible = "fsl,pq3-gpio";
+	reg = <0xfc00 0x100>;
+	interrupts = <47 0x2 0 0>;
+	gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
new file mode 100644
index 000000000..d1dd6fb82
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <0>;
+	compatible = "fsl-i2c";
+	reg = <0x3000 0x100>;
+	interrupts = <43 2 0 0>;
+	dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
new file mode 100644
index 000000000..a9bd803e2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3100 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <1>;
+	compatible = "fsl-i2c";
+	reg = <0x3100 0x100>;
+	interrupts = <43 2 0 0>;
+	dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
new file mode 100644
index 000000000..8734cffae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+timer@42100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x42100 0x100 0x42300 4>;
+	interrupts = <4 0 3 0
+		      5 0 3 0
+		      6 0 3 0
+		      7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
new file mode 100644
index 000000000..71c30eb10
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
@@ -0,0 +1,79 @@
+/*
+ * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+	interrupt-controller;
+	#address-cells = <0>;
+	#interrupt-cells = <4>;
+	reg = <0x40000 0x40000>;
+	compatible = "fsl,mpic";
+	device_type = "open-pic";
+	big-endian;
+	single-cpu-affinity;
+	last-interrupt-source = <255>;
+};
+
+timer@41100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x41100 0x100 0x41300 4>;
+	interrupts = <0 0 3 0
+		      1 0 3 0
+		      2 0 3 0
+		      3 0 3 0>;
+};
+
+message@41400 {
+	compatible = "fsl,mpic-v3.1-msgr";
+	reg = <0x41400 0x200>;
+	interrupts = <
+		0xb0 2 0 0
+		0xb1 2 0 0
+		0xb2 2 0 0
+		0xb3 2 0 0>;
+};
+
+msi@41600 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41600 0x80>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xe0 0 0 0
+		0xe1 0 0 0
+		0xe2 0 0 0
+		0xe3 0 0 0
+		0xe4 0 0 0
+		0xe5 0 0 0
+		0xe6 0 0 0
+		0xe7 0 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-power.dtsi b/arch/powerpc/boot/dts/fsl/pq3-power.dtsi
new file mode 100644
index 000000000..6af124010
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-power.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright 2024 NXP
+ */
+
+power@e0070 {
+	compatible = "fsl,mpc8548-pmc";
+	reg = <0xe0070 0x20>;
+
+	etsec1_clk: soc-clk@24 {
+		fsl,pmcdr-mask = <0x00000080>;
+	};
+	etsec2_clk: soc-clk@25 {
+		fsl,pmcdr-mask = <0x00000040>;
+	};
+	etsec3_clk: soc-clk@26 {
+		fsl,pmcdr-mask = <0x00000020>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi
new file mode 100644
index 000000000..587ca9ffa
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,srio-rmu";
+	reg = <0xd3000 0x500>;
+	ranges = <0x0 0xd3000 0x500>;
+
+	message-unit@0 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x0 0x100>;
+		interrupts = <
+			53 2 0 0 /* msg1_tx_irq */
+			54 2 0 0>;/* msg1_rx_irq */
+	};
+	message-unit@100 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x100 0x100>;
+		interrupts = <
+			55 2 0 0  /* msg2_tx_irq */
+			56 2 0 0>;/* msg2_rx_irq */
+	};
+	doorbell-unit@400 {
+		compatible = "fsl,srio-dbell-unit";
+		reg = <0x400 0x80>;
+		interrupts = <
+			49 2 0 0  /* bell_outb_irq */
+			50 2 0 0>;/* bell_inb_irq */
+	};
+	port-write-unit@4e0 {
+		compatible = "fsl,srio-port-write-unit";
+		reg = <0x4e0 0x20>;
+		interrupts = <48 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
new file mode 100644
index 000000000..3c28dd08d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@18000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x18000 0x1000>;
+	cell-index = <1>;
+	interrupts = <74 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
new file mode 100644
index 000000000..eefaf2855
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@19000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x19000 0x1000>;
+	cell-index = <2>;
+	interrupts = <41 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
new file mode 100644
index 000000000..02a5c7ae7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec2.1", "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0xfe>;
+	fsl,descriptor-types-mask = <0x12b0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
new file mode 100644
index 000000000..bba1ba44c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec3.0",
+		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+		     "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0 58 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0x9fe>;
+	fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
new file mode 100644
index 000000000..8f0a5669b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec3.1", "fsl,sec3.0",
+		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+		     "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0 58 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0xbfe>;
+	fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
new file mode 100644
index 000000000..c227f2748
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+		     "fsl,sec2.0";
+	reg = <0x30000 0x10000>;
+	interrupts = <45 2 0 0 58 2 0 0>;
+	fsl,num-channels = <4>;
+	fsl,channel-fifo-len = <24>;
+	fsl,exec-units-mask = <0x97c>;
+	fsl,descriptor-types-mask = <0x3a30abf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
new file mode 100644
index 000000000..bb3d8266b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
@@ -0,0 +1,67 @@
+/*
+ * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+	compatible = "fsl,sec-v4.4", "fsl,sec-v4.0";
+	fsl,sec-era = <3>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges		 = <0x0 0x30000 0x10000>;
+	reg		 = <0x30000 0x10000>;
+	interrupts	 = <58 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
+		reg	   = <0x3000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
+		reg	   = <0x4000 0x1000>;
+		interrupts	 = <45 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
new file mode 100644
index 000000000..185ab9dc3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@22000 {
+	compatible = "fsl-usb2-dr";
+	reg = <0x22000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <28 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
new file mode 100644
index 000000000..fe24cd612
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@23000 {
+	compatible = "fsl-usb2-dr";
+	reg = <0x23000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <46 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi
new file mode 100644
index 000000000..fcc7e5b7f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ Qonverge USB Host device tree stub [ controller @ offset 0x210000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb0: usb@210000 {
+	compatible = "fsl-usb2-dr";
+	reg = <0x210000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <44 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi
new file mode 100644
index 000000000..5022432eb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi
@@ -0,0 +1,90 @@
+/*
+ * QorIQ BMan Portal device tree stub for 10 portals
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x103000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x104000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x105000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x106000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x107000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x108000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x109000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi
new file mode 100644
index 000000000..3b5e3504a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ BMan device tree stub [ controller @ offset 0x31a000 ]
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+bman: bman@31a000 {
+	compatible = "fsl,bman";
+	reg = <0x31a000 0x1000>;
+	interrupts = <16 2 1 2>;
+	fsl,bman-portals = <&bportals>;
+	memory-region = <&bman_fbpr>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
new file mode 100644
index 000000000..463c1ed9f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+clockgen: global-utilities@e1000 {
+	compatible = "fsl,qoriq-clockgen-1.0";
+	reg = <0xe1000 0x1000>;
+	#clock-cells = <2>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
new file mode 100644
index 000000000..0361050bb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+clockgen: global-utilities@e1000 {
+	compatible = "fsl,qoriq-clockgen-2.0";
+	reg = <0xe1000 0x1000>;
+	#clock-cells = <2>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
new file mode 100644
index 000000000..1aebf3ea4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0x100300 0x4>;
+	ranges = <0x0 0x100100 0x200>;
+	cell-index = <0>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <28 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <29 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <30 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <31 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
new file mode 100644
index 000000000..ecf5e180f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,eloplus-dma";
+	reg = <0x101300 0x4>;
+	ranges = <0x0 0x101100 0x200>;
+	cell-index = <1>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		cell-index = <0>;
+		interrupts = <32 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		cell-index = <1>;
+		interrupts = <33 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		cell-index = <2>;
+		interrupts = <34 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		cell-index = <3>;
+		interrupts = <35 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
new file mode 100644
index 000000000..225c07b4e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@11c500 {
+	cell-index = <0>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11c500 0x100>;
+	clock-frequency = <0>;
+	interrupts = <36 2 0 0>;
+};
+
+serial1: serial@11c600 {
+	cell-index = <1>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11c600 0x100>;
+	clock-frequency = <0>;
+	interrupts = <36 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
new file mode 100644
index 000000000..d23233a56
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial2: serial@11d500 {
+	cell-index = <2>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11d500 0x100>;
+	clock-frequency = <0>;
+	interrupts = <37 2 0 0>;
+};
+
+serial3: serial@11d600 {
+	cell-index = <3>;
+	device_type = "serial";
+	compatible = "fsl,ns16550", "ns16550";
+	reg = <0x11d600 0x100>;
+	clock-frequency = <0>;
+	interrupts = <37 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
new file mode 100644
index 000000000..20835ae21
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc: sdhc@114000 {
+	compatible = "fsl,esdhc";
+	reg = <0x114000 0x1000>;
+	interrupts = <48 2 0 0>;
+	clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
new file mode 100644
index 000000000..6db06975e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@110000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,mpc8536-espi";
+	reg = <0x110000 0x1000>;
+	interrupts = <53 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi
new file mode 100644
index 000000000..eb77675c2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi
@@ -0,0 +1,62 @@
+/*
+ * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x90000 0x1000>;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xb0000 0x1000>;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-xgec";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+	};
+
+	xmdio0: mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+		interrupts = <101 2 0 0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi
new file mode 100644
index 000000000..b965bc219
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi
@@ -0,0 +1,69 @@
+/*
+ * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		tbi-handle = <&tbi0>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio0: mdio@e1120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe1120 0xee0>;
+		interrupts = <100 2 0 0>;
+
+		tbi0: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi
new file mode 100644
index 000000000..9eb6e6dd7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		tbi-handle = <&tbi1>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e3120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe3120 0xee0>;
+
+		tbi1: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi
new file mode 100644
index 000000000..092b89936
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		tbi-handle = <&tbi2>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e5120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe5120 0xee0>;
+
+		tbi2: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi
new file mode 100644
index 000000000..2df0dc876
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		tbi-handle = <&tbi3>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e7120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe7120 0xee0>;
+
+		tbi3: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi
new file mode 100644
index 000000000..5fceb2438
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		tbi-handle = <&tbi4>;
+		ptp-timer = <&ptp_timer0>;
+	};
+
+	mdio@e9120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe9120 0xee0>;
+
+		tbi4: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi
new file mode 100644
index 000000000..9b6cf9149
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi
@@ -0,0 +1,104 @@
+/*
+ * QorIQ FMan device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0xfe000>;
+	reg = <0x400000 0xfe000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x40 0xc>;
+	ptimer-handle = <&ptp_timer0>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x28000>;
+	};
+
+	fman0_oh_0x1: port@81000 {
+		cell-index = <0x1>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x81000 0x1000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x85000 0x1000>;
+		status = "disabled";
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x86000 0x1000>;
+		status = "disabled";
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x87000 0x1000>;
+		status = "disabled";
+	};
+};
+
+ptp_timer0: ptp-timer@4fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x4fe000 0x1000>;
+	interrupts = <96 2 0 0>;
+	clocks = <&clockgen 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi
new file mode 100644
index 000000000..83ae87b69
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi
@@ -0,0 +1,61 @@
+/*
+ * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x90000 0x1000>;
+	};
+
+	fman1_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xb0000 0x1000>;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-xgec";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi
new file mode 100644
index 000000000..b0f0e36a4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman1_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
+		tbi-handle = <&tbi5>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e1120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe1120 0xee0>;
+
+		tbi5: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi
new file mode 100644
index 000000000..a3a79f855
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman1_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
+		tbi-handle = <&tbi6>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e3120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe3120 0xee0>;
+
+		tbi6: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi
new file mode 100644
index 000000000..96a69a84b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman1_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
+		tbi-handle = <&tbi7>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e5120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe5120 0xee0>;
+
+		tbi7: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi
new file mode 100644
index 000000000..7405d1940
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman1_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
+		tbi-handle = <&tbi8>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e7120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe7120 0xee0>;
+
+		tbi8: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi
new file mode 100644
index 000000000..f49ad69e5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman1_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-dtsec";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
+		tbi-handle = <&tbi9>;
+		ptp-timer = <&ptp_timer1>;
+	};
+
+	mdio@e9120 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-mdio";
+		reg = <0xe9120 0xee0>;
+
+		tbi9: tbi-phy@8 {
+			reg = <0x8>;
+			device_type = "tbi-phy";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi
new file mode 100644
index 000000000..e95c11ff0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi
@@ -0,0 +1,104 @@
+/*
+ * QorIQ FMan device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman1: fman@500000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	compatible = "fsl,fman";
+	ranges = <0 0x500000 0xfe000>;
+	reg = <0x500000 0xfe000>;
+	interrupts = <97 2 0 0>, <16 2 1 0>;
+	clocks = <&clockgen 3 1>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x60 0xc>;
+	ptimer-handle = <&ptp_timer1>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x28000>;
+	};
+
+	fman1_oh_0x1: port@81000 {
+		cell-index = <0x1>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x81000 0x1000>;
+	};
+
+	fman1_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman1_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman1_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman1_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x85000 0x1000>;
+		status = "disabled";
+	};
+
+	fman1_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x86000 0x1000>;
+		status = "disabled";
+	};
+
+	fman1_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x87000 0x1000>;
+		status = "disabled";
+	};
+};
+
+ptp_timer1: ptp-timer@5fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x5fe000 0x1000>;
+	interrupts = <97 2 0 0>;
+	clocks = <&clockgen 3 1>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
new file mode 100644
index 000000000..7e70977f2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
@@ -0,0 +1,73 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+		fsl,fman-10g-port;
+		fsl,fman-best-effort-port;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
new file mode 100644
index 000000000..5f89f7c17
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -0,0 +1,77 @@
+/*
+ * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+		pcsphy-handle = <&pcsphy6>, <&qsgmiib_pcs2>, <&pcsphy6>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@e9000 {
+		qsgmiib_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <2>;
+		};
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy6: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
new file mode 100644
index 000000000..fb7032ddb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -0,0 +1,77 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+		pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs3>, <&pcsphy7>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@e9000 {
+		qsgmiib_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <3>;
+		};
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy7: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
new file mode 100644
index 000000000..6b3609574
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
+		pcs-handle-names = "sgmii", "xfi";
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
new file mode 100644
index 000000000..28ed1a85a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>, <&pcsphy1>;
+		pcs-handle-names = "sgmii", "xfi";
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
new file mode 100644
index 000000000..1089d6861
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
@@ -0,0 +1,69 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
new file mode 100644
index 000000000..a95bbb4fc
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
@@ -0,0 +1,76 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>, <&qsgmiia_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiia_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <1>;
+		};
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
new file mode 100644
index 000000000..7d5af0147
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
@@ -0,0 +1,76 @@
+/*
+ * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy2>, <&qsgmiia_pcs2>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiia_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <2>;
+		};
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy2: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
new file mode 100644
index 000000000..61e5466ec
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
@@ -0,0 +1,76 @@
+/*
+ * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy3>, <&qsgmiia_pcs3>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiia_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <3>;
+		};
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy3: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
new file mode 100644
index 000000000..3ba0cdafc
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
@@ -0,0 +1,69 @@
+/*
+ * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy4>, <&pcsphy4>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy4: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
new file mode 100644
index 000000000..51748de0a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
@@ -0,0 +1,76 @@
+/*
+ * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@400000 {
+	fman0_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman0_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e9000 {
+		qsgmiib_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <1>;
+		};
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy5: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi
new file mode 100644
index 000000000..d62b36c5a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0xfe000>;
+	reg = <0x400000 0xfe000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+	ptimer-handle = <&ptp_timer0>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+};
+
+ptp_timer0: ptp-timer@4fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x4fe000 0x1000>;
+	interrupts = <96 2 0 0>;
+	clocks = <&clockgen 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
new file mode 100644
index 000000000..ee4f5170f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
@@ -0,0 +1,77 @@
+/*
+ * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman1_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+		pcsphy-handle = <&pcsphy14>, <&qsgmiid_pcs2>, <&pcsphy14>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@e9000 {
+		qsgmiid_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <2>;
+		};
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy14: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
new file mode 100644
index 000000000..83d2e0ce8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
@@ -0,0 +1,77 @@
+/*
+ * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman1_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>;
+		pcsphy-handle = <&pcsphy15>, <&qsgmiid_pcs3>, <&pcsphy15>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@e9000 {
+		qsgmiid_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <3>;
+		};
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy15: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
new file mode 100644
index 000000000..3132fc73f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
@@ -0,0 +1,69 @@
+/*
+ * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman1_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy8>, <&pcsphy8>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy8: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
new file mode 100644
index 000000000..75e904d96
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
@@ -0,0 +1,76 @@
+/*
+ * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman1_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy9>, <&qsgmiic_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiic_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <1>;
+		};
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy9: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
new file mode 100644
index 000000000..69f2cc7b8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
@@ -0,0 +1,76 @@
+/*
+ * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman1_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy10>, <&qsgmiic_pcs2>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiic_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <2>;
+		};
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy10: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
new file mode 100644
index 000000000..b3aaf01d7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
@@ -0,0 +1,76 @@
+/*
+ * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman1_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy11>, <&qsgmiic_pcs3>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e1000 {
+		qsgmiic_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <3>;
+		};
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy11: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
new file mode 100644
index 000000000..18e020432
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
@@ -0,0 +1,69 @@
+/*
+ * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman1_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy12>, <&pcsphy12>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy12: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
new file mode 100644
index 000000000..55f329d13
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
@@ -0,0 +1,76 @@
+/*
+ * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman@500000 {
+	fman1_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman1_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>;
+		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy13>, <&qsgmiid_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	mdio@e9000 {
+		qsgmiid_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <1>;
+		};
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy13: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi
new file mode 100644
index 000000000..310232460
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x500000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman1: fman@500000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	compatible = "fsl,fman";
+	ranges = <0 0x500000 0xfe000>;
+	reg = <0x500000 0xfe000>;
+	interrupts = <97 2 0 0>, <16 2 1 0>;
+	clocks = <&clockgen 3 1>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x820 0x10>;
+	ptimer-handle = <&ptp_timer1>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman1_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman1_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman1_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman1_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman1_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman1_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio1: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+};
+
+ptp_timer1: ptp-timer@5fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x5fe000 0x1000>;
+	interrupts = <97 2 0 0>;
+	clocks = <&clockgen 3 1>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
new file mode 100644
index 000000000..48e5cd615
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
@@ -0,0 +1,99 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0 0x400000 0xfe000>;
+	reg = <0x400000 0xfe000>;
+	interrupts = <96 2 0 0>, <16 2 1 1>;
+	clocks = <&clockgen 3 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+	ptimer-handle = <&ptp_timer0>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x30000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+		fsl,erratum-a009885;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+		fsl,erratum-a009885;
+	};
+};
+
+ptp_timer0: ptp-timer@4fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x4fe000 0x1000>;
+	interrupts = <96 2 0 0>;
+	clocks = <&clockgen 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
new file mode 100644
index 000000000..cf714f5f6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio0: gpio@130000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x130000 0x1000>;
+	interrupts = <55 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi
new file mode 100644
index 000000000..c2f9cdadb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x131000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio1: gpio@131000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x131000 0x1000>;
+	interrupts = <54 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi
new file mode 100644
index 000000000..33f3ccbac
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x132000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio2: gpio@132000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x132000 0x1000>;
+	interrupts = <86 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi
new file mode 100644
index 000000000..86954e95e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x133000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio3: gpio@133000 {
+	compatible = "fsl,qoriq-gpio";
+	reg = <0x133000 0x1000>;
+	interrupts = <87 2 0 0>;
+	#gpio-cells = <2>;
+	gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
new file mode 100644
index 000000000..5f9bf7deb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x118000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@118000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <0>;
+	compatible = "fsl-i2c";
+	reg = <0x118000 0x100>;
+	interrupts = <38 2 0 0>;
+	dfsrr;
+};
+
+i2c@118100 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <1>;
+	compatible = "fsl-i2c";
+	reg = <0x118100 0x100>;
+	interrupts = <38 2 0 0>;
+	dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
new file mode 100644
index 000000000..7989bf5ee
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x119000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@119000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <2>;
+	compatible = "fsl-i2c";
+	reg = <0x119000 0x100>;
+	interrupts = <39 2 0 0>;
+	dfsrr;
+};
+
+i2c@119100 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cell-index = <3>;
+	compatible = "fsl-i2c";
+	reg = <0x119100 0x100>;
+	interrupts = <39 2 0 0>;
+	dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
new file mode 100644
index 000000000..08f42271f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+	interrupt-controller;
+	#address-cells = <0>;
+	#interrupt-cells = <4>;
+	reg = <0x40000 0x40000>;
+	compatible = "fsl,mpic", "chrp,open-pic";
+	device_type = "open-pic";
+	clock-frequency = <0x0>;
+};
+
+timer@41100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x41100 0x100 0x41300 4>;
+	interrupts = <0 0 3 0
+		      1 0 3 0
+		      2 0 3 0
+		      3 0 3 0>;
+};
+
+msi0: msi@41600 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41600 0x200 0x44140 4>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xe0 0 0 0
+		0xe1 0 0 0
+		0xe2 0 0 0
+		0xe3 0 0 0
+		0xe4 0 0 0
+		0xe5 0 0 0
+		0xe6 0 0 0
+		0xe7 0 0 0>;
+};
+
+msi1: msi@41800 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41800 0x200 0x45140 4>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xe8 0 0 0
+		0xe9 0 0 0
+		0xea 0 0 0
+		0xeb 0 0 0
+		0xec 0 0 0
+		0xed 0 0 0
+		0xee 0 0 0
+		0xef 0 0 0>;
+};
+
+msi2: msi@41a00 {
+	compatible = "fsl,mpic-msi";
+	reg = <0x41a00 0x200 0x46140 4>;
+	msi-available-ranges = <0 0x100>;
+	interrupts = <
+		0xf0 0 0 0
+		0xf1 0 0 0
+		0xf2 0 0 0
+		0xf3 0 0 0
+		0xf4 0 0 0
+		0xf5 0 0 0
+		0xf6 0 0 0
+		0xf7 0 0 0>;
+};
+
+timer@42100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x42100 0x100 0x42300 4>;
+	interrupts = <4 0 3 0
+		      5 0 3 0
+		      6 0 3 0
+		      7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi
new file mode 100644
index 000000000..64f713c24
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi
@@ -0,0 +1,149 @@
+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+	interrupt-controller;
+	#address-cells = <0>;
+	#interrupt-cells = <4>;
+	reg = <0x40000 0x40000>;
+	compatible = "fsl,mpic";
+	device_type = "open-pic";
+	clock-frequency = <0x0>;
+};
+
+timer@41100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x41100 0x100 0x41300 4>;
+	interrupts = <0 0 3 0
+		      1 0 3 0
+		      2 0 3 0
+		      3 0 3 0>;
+};
+
+msi0: msi@41600 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41600 0x200 0x44148 4>;
+	interrupts = <
+		0xe0 0 0 0
+		0xe1 0 0 0
+		0xe2 0 0 0
+		0xe3 0 0 0
+		0xe4 0 0 0
+		0xe5 0 0 0
+		0xe6 0 0 0
+		0xe7 0 0 0
+		0x100 0 0 0
+		0x101 0 0 0
+		0x102 0 0 0
+		0x103 0 0 0
+		0x104 0 0 0
+		0x105 0 0 0
+		0x106 0 0 0
+		0x107 0 0 0>;
+};
+
+msi1: msi@41800 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41800 0x200 0x45148 4>;
+	interrupts = <
+		0xe8 0 0 0
+		0xe9 0 0 0
+		0xea 0 0 0
+		0xeb 0 0 0
+		0xec 0 0 0
+		0xed 0 0 0
+		0xee 0 0 0
+		0xef 0 0 0
+		0x108 0 0 0
+		0x109 0 0 0
+		0x10a 0 0 0
+		0x10b 0 0 0
+		0x10c 0 0 0
+		0x10d 0 0 0
+		0x10e 0 0 0
+		0x10f 0 0 0>;
+};
+
+msi2: msi@41a00 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41a00 0x200 0x46148 4>;
+	interrupts = <
+		0xf0 0 0 0
+		0xf1 0 0 0
+		0xf2 0 0 0
+		0xf3 0 0 0
+		0xf4 0 0 0
+		0xf5 0 0 0
+		0xf6 0 0 0
+		0xf7 0 0 0
+		0x110 0 0 0
+		0x111 0 0 0
+		0x112 0 0 0
+		0x113 0 0 0
+		0x114 0 0 0
+		0x115 0 0 0
+		0x116 0 0 0
+		0x117 0 0 0>;
+};
+
+msi3: msi@41c00 {
+	compatible = "fsl,mpic-msi-v4.3";
+	reg = <0x41c00 0x200 0x47148 4>;
+	interrupts = <
+		0xf8 0 0 0
+		0xf9 0 0 0
+		0xfa 0 0 0
+		0xfb 0 0 0
+		0xfc 0 0 0
+		0xfd 0 0 0
+		0xfe 0 0 0
+		0xff 0 0 0
+		0x118 0 0 0
+		0x119 0 0 0
+		0x11a 0 0 0
+		0x11b 0 0 0
+		0x11c 0 0 0
+		0x11d 0 0 0
+		0x11e 0 0 0
+		0x11f 0 0 0>;
+};
+
+timer@42100 {
+	compatible = "fsl,mpic-global-timer";
+	reg = <0x42100 0x100 0x42300 4>;
+	interrupts = <4 0 3 0
+		      5 0 3 0
+		      6 0 3 0
+		      7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi
new file mode 100644
index 000000000..e77e4b4ed
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi
@@ -0,0 +1,101 @@
+/*
+ * QorIQ QMan Portal device tree stub for 10 portals & 15 pool channels
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&qportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x100000 0x1000>;
+		interrupts = <104 2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x101000 0x1000>;
+		interrupts = <106 2 0 0>;
+		cell-index = <1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x102000 0x1000>;
+		interrupts = <108 2 0 0>;
+		cell-index = <2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x103000 0x1000>;
+		interrupts = <110 2 0 0>;
+		cell-index = <3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x104000 0x1000>;
+		interrupts = <112 2 0 0>;
+		cell-index = <4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x105000 0x1000>;
+		interrupts = <114 2 0 0>;
+		cell-index = <5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x106000 0x1000>;
+		interrupts = <116 2 0 0>;
+		cell-index = <6>;
+	};
+
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x107000 0x1000>;
+		interrupts = <118 2 0 0>;
+		cell-index = <7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x108000 0x1000>;
+		interrupts = <120 2 0 0>;
+		cell-index = <8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x109000 0x1000>;
+		interrupts = <122 2 0 0>;
+		cell-index = <9>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi
new file mode 100644
index 000000000..0695778c4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ QMan device tree stub [ controller @ offset 0x318000 ]
+ *
+ * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+qman: qman@318000 {
+	compatible = "fsl,qman";
+	reg = <0x318000 0x1000>;
+	interrupts = <16 2 1 3>;
+	fsl,qman-portals = <&qportals>;
+	memory-region = <&qman_fqd &qman_pfdr>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi
new file mode 100644
index 000000000..b379abd14
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ QMan rev3 device tree stub [ controller @ offset 0x318000 ]
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+qman: qman@318000 {
+	compatible = "fsl,qman";
+	reg = <0x318000 0x2000>;
+	interrupts = <16 2 1 3>;
+	fsl,qman-portals = <&qportals>;
+	memory-region = <&qman_fqd &qman_pfdr>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi
new file mode 100644
index 000000000..8d2e8aa6c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi
@@ -0,0 +1,85 @@
+/*
+ * QorIQ RAID 1.0 device tree stub [ controller @ offset 0x320000 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+raideng: raideng@320000 {
+	compatible = "fsl,raideng-v1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x320000 0x10000>;
+	ranges = <0 0x320000 0x10000>;
+
+	raideng_jq0@1000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x1000 0x1000>;
+		ranges = <0x0 0x1000 0x1000>;
+
+		raideng_jr0: jr@0 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+			reg = <0x0 0x400>;
+			interrupts = <139 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		raideng_jr1: jr@400 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
+			reg = <0x400 0x400>;
+			interrupts = <140 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	raideng_jq1@2000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2000 0x1000>;
+		ranges = <0x0 0x2000 0x1000>;
+
+		raideng_jr2: jr@0 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+			reg = <0x0 0x400>;
+			interrupts = <141 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		raideng_jr3: jr@400 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
+			reg = <0x400 0x400>;
+			interrupts = <142 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
new file mode 100644
index 000000000..ca7fec792
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,srio-rmu";
+	reg = <0xd3000 0x500>;
+	ranges = <0x0 0xd3000 0x500>;
+
+	message-unit@0 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x0 0x100>;
+		interrupts = <
+			60 2 0 0  /* msg1_tx_irq */
+			61 2 0 0>;/* msg1_rx_irq */
+	};
+	message-unit@100 {
+		compatible = "fsl,srio-msg-unit";
+		reg = <0x100 0x100>;
+		interrupts = <
+			62 2 0 0  /* msg2_tx_irq */
+			63 2 0 0>;/* msg2_rx_irq */
+	};
+	doorbell-unit@400 {
+		compatible = "fsl,srio-dbell-unit";
+		reg = <0x400 0x80>;
+		interrupts = <
+			56 2 0 0  /* bell_outb_irq */
+			57 2 0 0>;/* bell_inb_irq */
+	};
+	port-write-unit@4e0 {
+		compatible = "fsl,srio-port-write-unit";
+		reg = <0x4e0 0x20>;
+		interrupts = <16 2 1 11>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
new file mode 100644
index 000000000..b642047fd
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@220000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x220000 0x1000>;
+	interrupts = <68 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
new file mode 100644
index 000000000..c57370259
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@221000 {
+	compatible = "fsl,pq-sata-v2";
+	reg = <0x221000 0x1000>;
+	interrupts = <69 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
new file mode 100644
index 000000000..02bee5fcb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
@@ -0,0 +1,101 @@
+/*
+ * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v4.0";
+	fsl,sec-era = <1>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x300000 0x10000>;
+	ranges = <0 0x300000 0x10000>;
+	interrupts = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
new file mode 100644
index 000000000..7f7574e53
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
@@ -0,0 +1,110 @@
+/*
+ * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+	fsl,sec-era = <3>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v4.2-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v4.2-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v4.2-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi
new file mode 100644
index 000000000..e298efbb0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi
@@ -0,0 +1,110 @@
+/*
+ * QorIQ Sec/Crypto 5.0 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+	fsl,sec-era = <5>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v5.0-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi
new file mode 100644
index 000000000..33ff09d52
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi
@@ -0,0 +1,119 @@
+/*
+ * QorIQ Sec/Crypto 5.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v5.2", "fsl,sec-v5.0", "fsl,sec-v4.0";
+	fsl,sec-era = <5>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v5.2-rtic",
+			     "fsl,sec-v5.0-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v5.2-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v5.2-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi
new file mode 100644
index 000000000..08778221c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi
@@ -0,0 +1,119 @@
+/*
+ * QorIQ Sec/Crypto 5.3 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+	compatible = "fsl,sec-v5.3", "fsl,sec-v5.0", "fsl,sec-v4.0";
+	fsl,sec-era = <4>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg		 = <0x300000 0x10000>;
+	ranges		 = <0 0x300000 0x10000>;
+	interrupts	 = <92 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <88 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x2000 0x1000>;
+		interrupts = <89 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x3000 0x1000>;
+		interrupts = <90 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		compatible = "fsl,sec-v5.3-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg = <0x4000 0x1000>;
+		interrupts = <91 2 0 0>;
+	};
+
+	rtic@6000 {
+		compatible = "fsl,sec-v5.3-rtic",
+			     "fsl,sec-v5.0-rtic",
+			     "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+
+		rtic_a: rtic-a@0 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x00 0x20 0x100 0x80>;
+		};
+
+		rtic_b: rtic-b@20 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x20 0x20 0x200 0x80>;
+		};
+
+		rtic_c: rtic-c@40 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x40 0x20 0x300 0x80>;
+		};
+
+		rtic_d: rtic-d@60 {
+			compatible = "fsl,sec-v5.3-rtic-memory",
+				     "fsl,sec-v5.0-rtic-memory",
+				     "fsl,sec-v4.0-rtic-memory";
+			reg = <0x60 0x20 0x500 0x80>;
+		};
+	};
+};
+
+sec_mon: sec_mon@314000 {
+	compatible = "fsl,sec-v5.3-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
+	reg = <0x314000 0x1000>;
+	interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi
new file mode 100644
index 000000000..7d4a6a235
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi
@@ -0,0 +1,57 @@
+/*
+ * QorIQ Sec/Crypto 6.0 device tree stub
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+	compatible = "fsl,sec-v6.0", "fsl,sec-v5.0",
+		     "fsl,sec-v4.0";
+	fsl,sec-era = <6>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+	};
+
+	jr@2000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+	};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
new file mode 100644
index 000000000..4dd6f84c2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@211000 {
+	compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+	reg = <0x211000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <45 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
new file mode 100644
index 000000000..f053835aa
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@210000 {
+	compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+	reg = <0x210000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupts = <44 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
new file mode 100644
index 000000000..f82f85c65
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
@@ -0,0 +1,232 @@
+/*
+ * T1023 RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t102xsi-pre.dtsi"
+
+/ {
+	model = "fsl,T1023RDB";
+	compatible = "fsl,T1023RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  1 0 0xf 0xff800000 0x00010000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x1 0x0 0x10000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25fl512s", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clk */
+			};
+		};
+
+		i2c@118000 {
+			eeprom@50 {
+				compatible = "st,m24256";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <0x5 0x1 0 0>;
+			};
+		};
+
+		i2c@118100 {
+			current-sensor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			current-sensor@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		fman@400000 {
+			fm1mac1: ethernet@e0000 {
+				phy-handle = <&sgmii_rtk_phy2>;
+				phy-connection-type = "sgmii";
+				sleep = <&rcpm 0x80000000>;
+			};
+
+			fm1mac2: ethernet@e2000 {
+				sleep = <&rcpm 0x40000000>;
+			};
+
+			fm1mac3: ethernet@e4000 {
+				phy-handle = <&sgmii_aqr_phy3>;
+				phy-connection-type = "2500base-x";
+				sleep = <&rcpm 0x20000000>;
+			};
+
+			fm1mac4: ethernet@e6000 {
+				phy-handle = <&rgmii_rtk_phy1>;
+				phy-connection-type = "rgmii";
+				sleep = <&rcpm 0x10000000>;
+			};
+
+
+			mdio0: mdio@fc000 {
+				rgmii_rtk_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+				sgmii_rtk_phy2: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+
+			xmdio0: mdio@fd000 {
+				sgmii_aqr_phy3: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+#include "t1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
new file mode 100644
index 000000000..8ef0c0202
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -0,0 +1,523 @@
+/*
+ * T1023 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc";
+	interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&pci1 {
+	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+&pci2 {
+	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+};
+
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		cell-index = <0x0>;
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		cell-index = <0x1>;
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		cell-index = <2>;
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		cell-index = <0x3>;
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		cell-index = <0x4>;
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		cell-index = <0x5>;
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <16>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v5.0",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t1023-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x1000>;
+		ranges = <0 0x20000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <128 1>;
+			fsl,secondary-cache-geometry = <32 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-clockgen2.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.1";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t1023-sfp";
+		reg = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t1023-serdes";
+		reg = <0xea000 0x4000>;
+	};
+
+	tmu: tmu@f0000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0xf0000 0x1000>;
+		interrupts = <18 2 0 0>;
+		fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
+		fsl,tmu-calibration =
+				<0x00000000 0x0000000f>,
+				<0x00000001 0x00000017>,
+				<0x00000002 0x0000001e>,
+				<0x00000003 0x00000026>,
+				<0x00000004 0x0000002e>,
+				<0x00000005 0x00000035>,
+				<0x00000006 0x0000003d>,
+				<0x00000007 0x00000044>,
+				<0x00000008 0x0000004c>,
+				<0x00000009 0x00000053>,
+				<0x0000000a 0x0000005b>,
+				<0x0000000b 0x00000064>,
+
+				<0x00010000 0x00000011>,
+				<0x00010001 0x0000001c>,
+				<0x00010002 0x00000024>,
+				<0x00010003 0x0000002b>,
+				<0x00010004 0x00000034>,
+				<0x00010005 0x00000039>,
+				<0x00010006 0x00000042>,
+				<0x00010007 0x0000004c>,
+				<0x00010008 0x00000051>,
+				<0x00010009 0x0000005a>,
+				<0x0001000a 0x00000063>,
+
+				<0x00020000 0x00000013>,
+				<0x00020001 0x00000019>,
+				<0x00020002 0x00000024>,
+				<0x00020003 0x0000002c>,
+				<0x00020004 0x00000035>,
+				<0x00020005 0x0000003d>,
+				<0x00020006 0x00000046>,
+				<0x00020007 0x00000050>,
+				<0x00020008 0x00000059>,
+
+				<0x00030000 0x00000002>,
+				<0x00030001 0x0000000d>,
+				<0x00030002 0x00000019>,
+				<0x00030003 0x00000024>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu1 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	scfg: global-utilities@fc000 {
+		compatible = "fsl,t1023-scfg";
+		reg = <0xfc000 0x1000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t1023-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+		no-1-8-v;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		phy_type = "utmi";
+		port0;
+	};
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts
new file mode 100644
index 000000000..9ea7942f9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1024qds.dts
@@ -0,0 +1,280 @@
+/*
+ * T1024 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t102xsi-pre.dtsi"
+
+/ {
+	model = "fsl,T1024QDS";
+	compatible = "fsl,T1024QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,tetra-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11", "jedec,spi-nor";  /* 16MB */
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+			};
+
+			flash@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040", "jedec,spi-nor";  /* 512KB */
+				reg = <1>;
+				spi-max-frequency = <10000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "eon,en25s64", "jedec,spi-nor";   /* 8MB */
+				reg = <2>;
+				spi-max-frequency = <10000000>;
+			};
+
+			slic@2 {
+				compatible = "maxim,ds26522";
+				reg = <2>;
+				spi-max-frequency = <2000000>;
+			};
+
+			slic@3 {
+				compatible = "maxim,ds26522";
+				reg = <3>;
+				spi-max-frequency = <2000000>;
+			};
+		};
+
+		i2c@118000 {
+			i2c-mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c512";
+						reg = <0x50>;
+					};
+
+					eeprom@51 {
+						compatible = "atmel,24c02";
+						reg = <0x51>;
+					};
+
+					eeprom@57 {
+						compatible = "atmel,24c02";
+						reg = <0x57>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@41 {
+						compatible = "ti,ina220";
+						reg = <0x41>;
+						shunt-resistor = <1000>;
+					};
+				};
+
+				i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+
+					adt7461@4c {
+						/* Thermal Monitor */
+						compatible = "adi,adt7461";
+						reg = <0x4c>;
+					};
+
+					eeprom@55 {
+						compatible = "atmel,24c02";
+						reg = <0x55>;
+					};
+
+					eeprom@56 {
+						compatible = "atmel,24c512";
+						reg = <0x56>;
+					};
+
+					eeprom@57 {
+						compatible = "atmel,24c512";
+						reg = <0x57>;
+					};
+				};
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x5 0x1 0 0>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+#include "t1024si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
new file mode 100644
index 000000000..7d003e07a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
@@ -0,0 +1,268 @@
+/*
+ * T1024 RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t102xsi-pre.dtsi"
+
+/ {
+	model = "fsl,T1024RDB";
+	compatible = "fsl,T1024RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,t1024-cpld", "fsl,deepsleep-cpld";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+			bank-width = <1>;
+			device-width = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512ax3", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clk */
+			};
+
+			slic@1 {
+				compatible = "maxim,ds26522";
+				reg = <1>;
+				spi-max-frequency = <2000000>;
+			};
+
+			slic@2 {
+				compatible = "maxim,ds26522";
+				reg = <2>;
+				spi-max-frequency = <2000000>;
+			};
+		};
+
+		i2c@118000 {
+			adt7461@4c {
+				/* Thermal Monitor */
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			current-sensor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c256";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@118100 {
+			i2c-mux@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		fman@400000 {
+			fm1mac1: ethernet@e0000 {
+				phy-handle = <&xg_aqr105_phy3>;
+				phy-connection-type = "xgmii";
+				sleep = <&rcpm 0x80000000>;
+			};
+
+			fm1mac2: ethernet@e2000 {
+				sleep = <&rcpm 0x40000000>;
+			};
+
+			fm1mac3: ethernet@e4000 {
+				phy-handle = <&rgmii_phy2>;
+				phy-connection-type = "rgmii";
+				sleep = <&rcpm 0x20000000>;
+			};
+
+			fm1mac4: ethernet@e6000 {
+				phy-handle = <&rgmii_phy1>;
+				phy-connection-type = "rgmii";
+				sleep = <&rcpm 0x10000000>;
+			};
+
+
+			mdio0: mdio@fc000 {
+				rgmii_phy1: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+				rgmii_phy2: ethernet-phy@6 {
+					reg = <0x6>;
+				};
+			};
+
+			xmdio0: mdio@fd000 {
+				xg_aqr105_phy3: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x1>;
+				};
+				sg_2500_aqr105_phy4: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+#include "t1024si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi
new file mode 100644
index 000000000..bb480346a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi
@@ -0,0 +1,100 @@
+/*
+ * T1024 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "t1023si-post.dtsi"
+
+/ {
+	aliases {
+		vga = &display;
+		display = &display;
+	};
+
+	qe:qe@ffe140000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+	};
+};
+
+&soc {
+	display:display@180000 {
+		compatible = "fsl,t1024-diu", "fsl,diu";
+		reg = <0x180000 1000>;
+		interrupts = <74 2 0 0>;
+	};
+};
+
+&qe {
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x6000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data", "fsl,cpm-muram-data";
+			reg = <0x0 0x6000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
new file mode 100644
index 000000000..d87ea1316
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
@@ -0,0 +1,95 @@
+/*
+ * T1024/T1023 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		dma0 = &dma0;
+		dma1 = &dma1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		sdhc = &sdhc;
+
+		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&L2_2>;
+			#cooling-cells = <2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts
new file mode 100644
index 000000000..fb6bc02eb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts
@@ -0,0 +1,46 @@
+/*
+ * T1040D4RDB Device Tree Source
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xd4rdb.dtsi"
+
+/ {
+	model = "fsl,T1040D4RDB";
+	compatible = "fsl,T1040D4RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+#include "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1040qds.dts b/arch/powerpc/boot/dts/fsl/t1040qds.dts
new file mode 100644
index 000000000..5f76edc78
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1040qds.dts
@@ -0,0 +1,46 @@
+/*
+ * T1040QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+	model = "fsl,T1040QDS";
+	compatible = "fsl,T1040QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+#include "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
new file mode 100644
index 000000000..d4f5f159d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * T1040RDB-REV-A Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ */
+
+#include "t1040rdb.dts"
+
+/ {
+	model = "fsl,T1040RDB-REV-A";
+};
+
+&seville_port0 {
+	label = "ETH5";
+};
+
+&seville_port2 {
+	label = "ETH7";
+};
+
+&seville_port4 {
+	label = "ETH9";
+};
+
+&seville_port6 {
+	label = "ETH11";
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
new file mode 100644
index 000000000..4347924e9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
@@ -0,0 +1,188 @@
+/*
+ * T1040RDB Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xrdb.dtsi"
+
+/ {
+	model = "fsl,T1040RDB";
+	compatible = "fsl,T1040RDB";
+
+	aliases {
+		phy_sgmii_2 = &phy_sgmii_2;
+	};
+
+	soc@ffe000000 {
+		fman@400000 {
+			ethernet@e0000 {
+				fixed-link = <0 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				fixed-link = <1 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_2: ethernet-phy@3 {
+					reg = <0x03>;
+				};
+
+				/* VSC8514 QSGMII PHY */
+				phy_qsgmii_0: ethernet-phy@4 {
+					reg = <0x4>;
+				};
+
+				phy_qsgmii_1: ethernet-phy@5 {
+					reg = <0x5>;
+				};
+
+				phy_qsgmii_2: ethernet-phy@6 {
+					reg = <0x6>;
+				};
+
+				phy_qsgmii_3: ethernet-phy@7 {
+					reg = <0x7>;
+				};
+
+				/* VSC8514 QSGMII PHY */
+				phy_qsgmii_4: ethernet-phy@8 {
+					reg = <0x8>;
+				};
+
+				phy_qsgmii_5: ethernet-phy@9 {
+					reg = <0x9>;
+				};
+
+				phy_qsgmii_6: ethernet-phy@a {
+					reg = <0xa>;
+				};
+
+				phy_qsgmii_7: ethernet-phy@b {
+					reg = <0xb>;
+				};
+			};
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		cpld@3,0 {
+			compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld";
+		};
+	};
+};
+
+#include "t1040si-post.dtsi"
+
+&seville_switch {
+	status = "okay";
+};
+
+&seville_port0 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_0>;
+	phy-mode = "qsgmii";
+	label = "ETH3";
+	status = "okay";
+};
+
+&seville_port1 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_1>;
+	phy-mode = "qsgmii";
+	label = "ETH4";
+	status = "okay";
+};
+
+&seville_port2 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_2>;
+	phy-mode = "qsgmii";
+	label = "ETH5";
+	status = "okay";
+};
+
+&seville_port3 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_3>;
+	phy-mode = "qsgmii";
+	label = "ETH6";
+	status = "okay";
+};
+
+&seville_port4 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_4>;
+	phy-mode = "qsgmii";
+	label = "ETH7";
+	status = "okay";
+};
+
+&seville_port5 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_5>;
+	phy-mode = "qsgmii";
+	label = "ETH8";
+	status = "okay";
+};
+
+&seville_port6 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_6>;
+	phy-mode = "qsgmii";
+	label = "ETH9";
+	status = "okay";
+};
+
+&seville_port7 {
+	managed = "in-band-status";
+	phy-handle = <&phy_qsgmii_7>;
+	phy-mode = "qsgmii";
+	label = "ETH10";
+	status = "okay";
+};
+
+&seville_port8 {
+	status = "okay";
+};
+
+&seville_port9 {
+	status = "okay";
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
new file mode 100644
index 000000000..c9542b73b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -0,0 +1,757 @@
+/*
+ * T1040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc";
+	interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&pci1 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+&pci2 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&pci3 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <23 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <23 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <16>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v5.0",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t1040-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x1000>;
+		ranges = <0 0x20000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <128 1>;
+			fsl,secondary-cache-geometry = <16 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-clockgen2.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.1";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t1040-sfp";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t1040-serdes";
+		reg	   = <0xea000 0x4000>;
+	};
+
+	tmu: tmu@f0000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0xf0000 0x1000>;
+		interrupts = <18 2 0 0>;
+		fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>;
+		fsl,tmu-calibration =
+				<0x00000000 0x00000025>,
+				<0x00000001 0x00000028>,
+				<0x00000002 0x0000002d>,
+				<0x00000003 0x00000031>,
+				<0x00000004 0x00000036>,
+				<0x00000005 0x0000003a>,
+				<0x00000006 0x00000040>,
+				<0x00000007 0x00000044>,
+				<0x00000008 0x0000004a>,
+				<0x00000009 0x0000004f>,
+				<0x0000000a 0x00000054>,
+
+				<0x00010000 0x0000000d>,
+				<0x00010001 0x00000013>,
+				<0x00010002 0x00000019>,
+				<0x00010003 0x0000001f>,
+				<0x00010004 0x00000025>,
+				<0x00010005 0x0000002d>,
+				<0x00010006 0x00000033>,
+				<0x00010007 0x00000043>,
+				<0x00010008 0x0000004b>,
+				<0x00010009 0x00000053>,
+
+				<0x00020000 0x00000010>,
+				<0x00020001 0x00000017>,
+				<0x00020002 0x0000001f>,
+				<0x00020003 0x00000029>,
+				<0x00020004 0x00000031>,
+				<0x00020005 0x0000003c>,
+				<0x00020006 0x00000042>,
+				<0x00020007 0x0000004d>,
+				<0x00020008 0x00000056>,
+
+				<0x00030000 0x00000012>,
+				<0x00030001 0x0000001d>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu1 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map2 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu2 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map3 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu3 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	scfg: global-utilities@fc000 {
+		compatible = "fsl,t1040-scfg";
+		reg = <0xfc000 0x1000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t1040-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+			fsl,iommu-parent = <&pamu0>;
+			fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+			phy_type = "utmi";
+			port0;
+		};
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			fsl,iommu-parent = <&pamu0>;
+			fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+	display@180000 {
+		compatible = "fsl,t1040-diu", "fsl,diu";
+		reg = <0x180000 1000>;
+		interrupts = <74 2 0 0>;
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+/include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			status = "disabled";
+		};
+	};
+
+	seville_switch: ethernet-switch@800000 {
+		compatible = "mscc,vsc9953-switch";
+		reg = <0x800000 0x290000>;
+		interrupts = <26 2 0 0>;
+		interrupt-names = "xtr";
+		little-endian;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			seville_port0: port@0 {
+				reg = <0>;
+				status = "disabled";
+			};
+
+			seville_port1: port@1 {
+				reg = <1>;
+				status = "disabled";
+			};
+
+			seville_port2: port@2 {
+				reg = <2>;
+				status = "disabled";
+			};
+
+			seville_port3: port@3 {
+				reg = <3>;
+				status = "disabled";
+			};
+
+			seville_port4: port@4 {
+				reg = <4>;
+				status = "disabled";
+			};
+
+			seville_port5: port@5 {
+				reg = <5>;
+				status = "disabled";
+			};
+
+			seville_port6: port@6 {
+				reg = <6>;
+				status = "disabled";
+			};
+
+			seville_port7: port@7 {
+				reg = <7>;
+				status = "disabled";
+			};
+
+			seville_port8: port@8 {
+				reg = <8>;
+				phy-mode = "internal";
+				ethernet = <&enet0>;
+				status = "disabled";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+			seville_port9: port@9 {
+				reg = <9>;
+				phy-mode = "internal";
+				ethernet = <&enet1>;
+				status = "disabled";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	fsl,qe-num-riscs = <1>;
+	fsl,qe-num-snums = <28>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x6000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+			"fsl,cpm-muram-data";
+			reg = <0x0 0x6000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
new file mode 100644
index 000000000..4fa15f48a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
@@ -0,0 +1,105 @@
+/*
+ * T1042D4RDB Device Tree Source
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xd4rdb.dtsi"
+
+/ {
+	model = "fsl,T1042D4RDB";
+	compatible = "fsl,T1042D4RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		cpld@3,0 {
+			compatible = "fsl,t1040d4rdb-cpld",
+					"fsl,deepsleep-cpld";
+		};
+	};
+
+	soc: soc@ffe000000 {
+		fman0: fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_1>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			mdio0: mdio@fc000 {
+				phy_sgmii_0: ethernet-phy@2 {
+					reg = <0x02>;
+				};
+
+				phy_sgmii_1: ethernet-phy@3 {
+					reg = <0x03>;
+				};
+
+				phy_sgmii_2: ethernet-phy@1 {
+					reg = <0x01>;
+				};
+
+				phy_rgmii_0: ethernet-phy@4 {
+					reg = <0x04>;
+				};
+
+				phy_rgmii_1: ethernet-phy@5 {
+					reg = <0x05>;
+				};
+			};
+		};
+	};
+
+};
+
+#include "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1042qds.dts b/arch/powerpc/boot/dts/fsl/t1042qds.dts
new file mode 100644
index 000000000..90a4a73bb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1042qds.dts
@@ -0,0 +1,46 @@
+/*
+ * T1042QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+	model = "fsl,T1042QDS";
+	compatible = "fsl,T1042QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+#include "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
new file mode 100644
index 000000000..099764322
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
@@ -0,0 +1,76 @@
+/*
+ * T1042RDB Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xrdb.dtsi"
+
+/ {
+	model = "fsl,T1042RDB";
+	compatible = "fsl,T1042RDB";
+
+	aliases {
+		phy_sgmii_2 = &phy_sgmii_2;
+	};
+
+	soc@ffe000000 {
+		fman@400000 {
+			ethernet@e0000 {
+			       status = "disabled";
+			};
+
+			ethernet@e2000 {
+			       status = "disabled";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_2: ethernet-phy@3 {
+					reg = <0x03>;
+				};
+			};
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		cpld@3,0 {
+			compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld";
+		};
+	};
+};
+
+#include "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
new file mode 100644
index 000000000..b10cab1a3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
@@ -0,0 +1,73 @@
+/*
+ * T1042RDB_PI Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t104xsi-pre.dtsi"
+/include/ "t104xrdb.dtsi"
+
+/ {
+	model = "fsl,T1042RDB_PI";
+	compatible = "fsl,T1042RDB_PI";
+
+	ifc: localbus@ffe124000 {
+		cpld@3,0 {
+			compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld";
+		};
+	};
+
+	soc: soc@ffe000000 {
+		i2c@118000 {
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+				interrupts = <0x2 0x1 0 0>;
+			};
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				status = "disabled";
+			};
+
+			ethernet@e2000 {
+				status = "disabled";
+			};
+
+			ethernet@e4000 {
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
new file mode 100644
index 000000000..a5544f936
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
@@ -0,0 +1,37 @@
+/*
+ * T1042 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "t1040si-post.dtsi"
+
+/* Place holder for ethernet related device tree nodes */
diff --git a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
new file mode 100644
index 000000000..863f94312
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
@@ -0,0 +1,253 @@
+/*
+ * T1040D4RDB/T1042D4RDB Device Tree Source
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		cpld@3,0 {
+			compatible = "fsl,t1040d4rdb-cpld";
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512ax3", "jedec,spi-nor";
+				reg = <0>;
+				/* input clock */
+				spi-max-frequency = <10000000>;
+			};
+			slic@1 {
+				compatible = "maxim,ds26522";
+				reg = <1>;
+				spi-max-frequency = <2000000>; /* input clock */
+			};
+			slic@2 {
+				compatible = "maxim,ds26522";
+				reg = <2>;
+				spi-max-frequency = <2000000>; /* input clock */
+			};
+		};
+		i2c@118000 {
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+				interrupts = <0x2 0x1 0 0>;
+			};
+		};
+
+		i2c@118100 {
+			mux@77 {
+				/*
+				 * Child nodes of mux depend on which i2c
+				 * devices are connected via the mini PCI
+				 * connector slot1, the mini PCI connector
+				 * slot2, the HDMI connector, and the PEX
+				 * slot. Systems with such devices attached
+				 * should provide a wrapper .dts file that
+				 * includes this one, and adds those nodes
+				 */
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x0 0x0 0x10000000
+			  0x01000000 0 0x0 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+			  0x01000000 0 0 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
new file mode 100644
index 000000000..1c329f076
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
@@ -0,0 +1,407 @@
+/*
+ * T104xQDS Device Tree Source
+ *
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	model = "fsl,T1040QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		emi1_rgmii0 = &t1040mdio0;
+		emi1_rgmii1 = &t1040mdio1;
+		emi1_slot3 = &t1040mdio3;
+		emi1_slot5 = &t1040mdio5;
+		emi1_slot6 = &t1040mdio6;
+		emi1_slot7 = &t1040mdio7;
+		rgmii_phy1 = &rgmii_phy1;
+		rgmii_phy2 = &rgmii_phy2;
+		phy_s3_01 = &phy_s3_01;
+		phy_s3_02 = &phy_s3_02;
+		phy_s3_03 = &phy_s3_03;
+		phy_s3_04 = &phy_s3_04;
+		phy_s5_01 = &phy_s5_01;
+		phy_s5_02 = &phy_s5_02;
+		phy_s5_03 = &phy_s5_03;
+		phy_s5_04 = &phy_s5_04;
+		phy_s6_01 = &phy_s6_01;
+		phy_s6_02 = &phy_s6_02;
+		phy_s6_03 = &phy_s6_03;
+		phy_s6_04 = &phy_s6_04;
+		phy_s7_01 = &phy_s7_01;
+		phy_s7_02 = &phy_s7_02;
+		phy_s7_03 = &phy_s7_03;
+		phy_s7_04 = &phy_s7_04;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <0x54 1>;
+				mux-mask = <0xe0>;
+
+				t1040mdio0: mdio@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x00>;
+					status = "disabled";
+
+					rgmii_phy1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				t1040mdio1: mdio@20 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x20>;
+					status = "disabled";
+
+					rgmii_phy2: ethernet-phy@2 {
+						reg = <0x2>;
+					};
+				};
+
+				t1040mdio3: mdio@60 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x60>;
+					status = "disabled";
+
+					phy_s3_01: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_s3_02: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_s3_03: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_s3_04: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t1040mdio5: mdio@a0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0xa0>;
+
+					phy_s5_01: ethernet-phy@1c {
+						reg = <0x14>;
+					};
+
+					phy_s5_02: ethernet-phy@1d {
+						reg = <0x15>;
+					};
+
+					phy_s5_03: ethernet-phy@1e {
+						reg = <0x16>;
+					};
+
+					phy_s5_04: ethernet-phy@1f {
+						reg = <0x17>;
+					};
+				};
+
+				t1040mdio6: mdio@c0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0xc0>;
+
+					phy_s6_01: ethernet-phy@1c {
+						reg = <0x18>;
+					};
+
+					phy_s6_02: ethernet-phy@1d {
+						reg = <0x19>;
+					};
+
+					phy_s6_03: ethernet-phy@1e {
+						reg = <0x1a>;
+					};
+
+					phy_s6_04: ethernet-phy@1f {
+						reg = <0x1b>;
+					};
+				};
+
+				t1040mdio7: mdio@e0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0xe0>;
+					status = "disabled";
+
+					phy_s7_01: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_s7_02: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_s7_03: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_s7_04: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			i2c-mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				fixed-link = <0 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				fixed-link = <1 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_s7_03>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&rgmii_phy1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&rgmii_phy2>;
+				phy-connection-type = "rgmii";
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
new file mode 100644
index 000000000..fc7bec5dc
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
@@ -0,0 +1,263 @@
+/*
+ * T1040RDB/T1042RDB Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	aliases {
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_2 = &phy_sgmii_2;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		cpld@3,0 {
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512ax3", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clock */
+			};
+			slic@3 {
+				compatible = "maxim,ds26522";
+				reg = <3>;
+				spi-max-frequency = <2000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			adt7461@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@118100 {
+			i2c-mux@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		fman@400000 {
+			ethernet@e6000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii-id";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii-id";
+			};
+
+			mdio0: mdio@fc000 {
+				phy_sgmii_2: ethernet-phy@3 {
+					reg = <0x03>;
+				};
+
+				phy_rgmii_0: ethernet-phy@1 {
+					reg = <0x01>;
+				};
+
+				phy_rgmii_1: ethernet-phy@2 {
+					reg = <0x02>;
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
new file mode 100644
index 000000000..dd59e4b69
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
@@ -0,0 +1,115 @@
+/*
+ * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013-2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		sdhc = &sdhc;
+
+		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&L2_2>;
+			#cooling-cells = <2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e5500@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&clockgen 1 2>;
+			next-level-cache = <&L2_3>;
+			#cooling-cells = <2>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e5500@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&clockgen 1 3>;
+			next-level-cache = <&L2_4>;
+			#cooling-cells = <2>;
+			L2_4: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t2080qds.dts b/arch/powerpc/boot/dts/fsl/t2080qds.dts
new file mode 100644
index 000000000..8d190e8c6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t2080qds.dts
@@ -0,0 +1,213 @@
+/*
+ * T2080QDS Device Tree Source
+ *
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t208xsi-pre.dtsi"
+/include/ "t208xqds.dtsi"
+
+/ {
+	model = "fsl,T2080QDS";
+	compatible = "fsl,T2080QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		emi1_slot1 = &t2080mdio2;
+		emi1_slot2 = &t2080mdio3;
+		emi1_slot3 = &t2080mdio4;
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+&soc {
+	fman@400000 {
+		ethernet@e0000 {
+			phy-handle = <&phy_sgmii_s3_1e>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e2000 {
+			phy-handle = <&phy_sgmii_s3_1f>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e4000 {
+			phy-handle = <&rgmii_phy1>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e6000 {
+			phy-handle = <&rgmii_phy2>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e8000 {
+			phy-handle = <&phy_sgmii_s2_1e>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@ea000 {
+			phy-handle = <&phy_sgmii_s2_1d>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@f0000 {
+			phy-handle = <&phy_xaui_slot3>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@f2000 {
+			phy-handle = <&phy_sgmii_s3_1f>;
+			phy-connection-type = "xgmii";
+		};
+
+		mdio@fd000 {
+			phy_xaui_slot3: ethernet-phy@3 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x3>;
+			};
+		};
+	};
+};
+
+&boardctrl {
+	mdio-mux-emi1 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;
+		mux-mask = <0xe0>;
+
+		t2080mdio0: mdio@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			rgmii_phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+		};
+
+		t2080mdio1: mdio@20 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x20>;
+
+			rgmii_phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+
+		t2080mdio2: mdio@40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40>;
+			status = "disabled";
+
+			phy_sgmii_s1_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s1_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s1_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s1_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2080mdio3: mdio@c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc0>;
+
+			phy_sgmii_s2_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s2_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s2_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s2_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2080mdio4: mdio@60 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x60>;
+			status = "disabled";
+
+			phy_sgmii_s3_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s3_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s3_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s3_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
+/include/ "t2080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t2080rdb.dts b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
new file mode 100644
index 000000000..092a40074
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
@@ -0,0 +1,122 @@
+/*
+ * T2080PCIe-RDB Board Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t208xsi-pre.dtsi"
+/include/ "t208xrdb.dtsi"
+
+/ {
+	model = "fsl,T2080RDB";
+	compatible = "fsl,T2080RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+&soc {
+	fman@400000 {
+		ethernet@e0000 {
+			phy-handle = <&xg_aq1202_phy3>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e2000 {
+			phy-handle = <&xg_aq1202_phy4>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e4000 {
+			phy-handle = <&rgmii_phy1>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e6000 {
+			phy-handle = <&rgmii_phy2>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@f0000 {
+			phy-handle = <&xg_cs4315_phy2>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@f2000 {
+			phy-handle = <&xg_cs4315_phy1>;
+			phy-connection-type = "xgmii";
+		};
+
+		mdio@fc000 {
+			rgmii_phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+			rgmii_phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+
+		mdio@fd000 {
+			xg_cs4315_phy1: ethernet-phy@c {
+				compatible = "ethernet-phy-id13e5.1002";
+				reg = <0xc>;
+			};
+
+			xg_cs4315_phy2: ethernet-phy@d {
+				compatible = "ethernet-phy-id13e5.1002";
+				reg = <0xd>;
+			};
+
+			xg_aq1202_phy3: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x0>;
+			};
+
+			xg_aq1202_phy4: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x1>;
+			};
+		};
+	};
+};
+
+/include/ "t2080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi
new file mode 100644
index 000000000..082ec2044
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi
@@ -0,0 +1,69 @@
+/*
+ * T2080 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t2081si-post.dtsi"
+
+&soc {
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t2081qds.dts b/arch/powerpc/boot/dts/fsl/t2081qds.dts
new file mode 100644
index 000000000..fc5c4a30f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t2081qds.dts
@@ -0,0 +1,265 @@
+/*
+ * T2081QDS Device Tree Source
+ *
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t208xsi-pre.dtsi"
+/include/ "t208xqds.dtsi"
+
+/ {
+	model = "fsl,T2081QDS";
+	compatible = "fsl,T2081QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		emi1_slot1 = &t2081mdio2;
+		emi1_slot2 = &t2081mdio3;
+		emi1_slot3 = &t2081mdio4;
+		emi1_slot5 = &t2081mdio5;
+		emi1_slot6 = &t2081mdio6;
+		emi1_slot7 = &t2081mdio7;
+	};
+};
+
+&soc {
+	fman@400000 {
+		ethernet@e0000 {
+			phy-handle = <&phy_sgmii_s7_1c>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@e2000 {
+			phy-handle = <&phy_sgmii_s7_1d>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@e4000 {
+			phy-handle = <&rgmii_phy1>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e6000 {
+			phy-handle = <&rgmii_phy2>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e8000 {
+			phy-handle = <&phy_sgmii_s3_1c>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@ea000 {
+			phy-handle = <&phy_sgmii_s7_1f>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@f0000 {
+			phy-handle = <&phy_sgmii_s2_1c>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@f2000 {
+			phy-handle = <&phy_sgmii_s7_1e>;
+			phy-connection-type = "xgmii";
+		};
+	};
+};
+
+&boardctrl {
+	mdio-mux-emi1 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;
+		mux-mask = <0xe0>;
+
+		t2081mdio0: mdio@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			rgmii_phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+		};
+
+		t2081mdio1: mdio@20 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x20>;
+
+			rgmii_phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+
+		t2081mdio2: mdio@40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40>;
+
+			phy_sgmii_s1_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s1_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s1_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s1_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio3: mdio@60 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x60>;
+
+			phy_sgmii_s2_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s2_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s2_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s2_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio4: mdio@80 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x80>;
+			status = "disabled";
+
+			phy_sgmii_s3_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s3_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s3_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s3_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio5: mdio@a0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xa0>;
+			status = "disabled";
+
+			phy_sgmii_s5_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s5_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s5_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s5_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio6: mdio@c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc0>;
+			status = "disabled";
+
+			phy_sgmii_s6_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s6_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s6_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s6_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio7: mdio@e0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe0>;
+
+			phy_sgmii_s7_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s7_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s7_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s7_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
+/include/ "t2081si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
new file mode 100644
index 000000000..6bb95878d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -0,0 +1,677 @@
+/*
+ * T2081 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc";
+	interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x240000 */
+&pci0 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+		>;
+	};
+};
+
+/* controller at 0x250000 */
+&pci1 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+		>;
+	};
+};
+
+/* controller at 0x260000 */
+&pci2 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+		>;
+	};
+};
+
+/* controller at 0x270000 */
+&pci3 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <23 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <23 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+		>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t2080-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0
+			      94 2 0 0
+			      95 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t2080-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t2080-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t2080-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t2080-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-snpc@32000 {
+		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x32000 0x1000 0x1062000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+	bman-portal@28000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <125 2 0 0>;
+	};
+	bman-portal@2c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <127 2 0 0>;
+	};
+	bman-portal@30000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <129 2 0 0>;
+	};
+	bman-portal@34000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <131 2 0 0>;
+	};
+	bman-portal@38000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <133 2 0 0>;
+	};
+	bman-portal@3c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <135 2 0 0>;
+	};
+	bman-portal@40000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <137 2 0 0>;
+	};
+	bman-portal@44000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <139 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+	qportal10: qman-portal@28000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <124 0x2 0 0>;
+		cell-index = <0xa>;
+	};
+	qportal11: qman-portal@2c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <126 0x2 0 0>;
+		cell-index = <0xb>;
+	};
+	qportal12: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <128 0x2 0 0>;
+		cell-index = <0xc>;
+	};
+	qportal13: qman-portal@34000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <130 0x2 0 0>;
+		cell-index = <0xd>;
+	};
+	qportal14: qman-portal@38000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <132 0x2 0 0>;
+		cell-index = <0xe>;
+	};
+	qportal15: qman-portal@3c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <134 0x2 0 0>;
+		cell-index = <0xf>;
+	};
+	qportal16: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <136 0x2 0 0>;
+		cell-index = <0x10>;
+	};
+	qportal17: qman-portal@44000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <138 0x2 0 0>;
+		cell-index = <0x11>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t2080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000
+		       0x12000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26
+			      16 2 1 25>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x3000>;
+		fsl,portid-mapping = <0x8000>;
+		ranges = <0 0x20000 0x3000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-mpic4.3.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t2080-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-clockgen2.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t2080-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t2080-sfp";
+		reg = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t2080-serdes";
+		reg = <0xea000 0x4000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+/include/ "elo3-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+/include/ "elo3-dma-2.dtsi"
+	dma@102300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x588>; /* DMA3LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t2080-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* SDMMCLIODNR */
+		sdhci,auto-cmd12;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		phy_type = "utmi";
+		port0;
+	};
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+/include/ "qoriq-sec5.2-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-10g-2.dtsi"
+/include/ "qoriq-fman3-0-10g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
+	};
+
+	L2_1: l2-cache-controller@c20000 {
+		/* Cluster 0 L2 cache */
+		compatible = "fsl,t2080-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+		interrupts = <16 2 1 9>;
+	};
+};
+
+&fman0_rx_0x08 {
+	/delete-property/ fsl,fman-10g-port;
+};
+
+&fman0_tx_0x28 {
+	/delete-property/ fsl,fman-10g-port;
+};
+
+&fman0_rx_0x09 {
+	/delete-property/ fsl,fman-10g-port;
+};
+
+&fman0_tx_0x29 {
+	/delete-property/ fsl,fman-10g-port;
+};
diff --git a/arch/powerpc/boot/dts/fsl/t208xqds.dtsi b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi
new file mode 100644
index 000000000..962c99941
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi
@@ -0,0 +1,277 @@
+/*
+ * T2080/T2081 QDS Device Tree Source
+ *
+ * Copyright 2013 - 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	model = "fsl,T2080QDS";
+	compatible = "fsl,T2080QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		boardctrl: board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+
+			flash@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
+				reg = <1>;
+				spi-max-frequency = <35000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "eon,en25s64", "jedec,spi-nor";
+				reg = <2>;
+				spi-max-frequency = <35000000>;
+			};
+		};
+
+		i2c@118000 {
+			i2c-mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c512";
+						reg = <0x50>;
+					};
+
+					eeprom@51 {
+						compatible = "atmel,24c02";
+						reg = <0x51>;
+					};
+
+					eeprom@57 {
+						compatible = "atmel,24c02";
+						reg = <0x57>;
+					};
+
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+						interrupts = <0xb 0x1 0 0>;
+					};
+				};
+
+				i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+
+					eeprom@55 {
+						compatible = "atmel,24c02";
+						reg = <0x55>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@41 {
+						compatible = "ti,ina220";
+						reg = <0x41>;
+						shunt-resistor = <1000>;
+					};
+				};
+
+				i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+
+					adt7461@4c {
+						compatible = "adi,adt7461";
+						reg = <0x4c>;
+					};
+				};
+			};
+		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
new file mode 100644
index 000000000..ecc3e8c73
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
@@ -0,0 +1,211 @@
+/*
+ * T2080PCIe-RDB Board Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	model = "fsl,T2080RDB";
+	compatible = "fsl,T2080RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		boardctrl: board-control@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,t2080-cpld";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512ax3", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			adt7481@4c {
+				compatible = "adi,adt7481";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c256";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@118100 {
+			i2c-mux@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+			};
+		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
new file mode 100644
index 000000000..3f745de44
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
@@ -0,0 +1,110 @@
+/*
+ * T2080/T2081 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+
+		crypto = &crypto;
+
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		dma2 = &dma2;
+		sdhc = &sdhc;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t4240qds.dts b/arch/powerpc/boot/dts/fsl/t4240qds.dts
new file mode 100644
index 000000000..128b5798b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t4240qds.dts
@@ -0,0 +1,708 @@
+/*
+ * T4240QDS Device Tree Source
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t4240si-pre.dtsi"
+
+/ {
+	model = "fsl,T4240QDS";
+	compatible = "fsl,T4240QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		phy_rgmii1 = &phyrgmii1;
+		phy_rgmii2 = &phyrgmii2;
+		phy_sgmii3 = &phy3;
+		phy_sgmii4 = &phy4;
+		phy_sgmii11 = &phy11;
+		phy_sgmii12 = &phy12;
+		sgmii_phy11 = &sgmiiphy11;
+		sgmii_phy12 = &sgmiiphy12;
+		sgmii_phy13 = &sgmiiphy13;
+		sgmii_phy14 = &sgmiiphy14;
+		sgmii_phy21 = &sgmiiphy21;
+		sgmii_phy22 = &sgmiiphy22;
+		sgmii_phy23 = &sgmiiphy23;
+		sgmii_phy24 = &sgmiiphy24;
+		sgmii_phy31 = &sgmiiphy31;
+		sgmii_phy32 = &sgmiiphy32;
+		sgmii_phy33 = &sgmiiphy33;
+		sgmii_phy34 = &sgmiiphy34;
+		sgmii_phy41 = &sgmiiphy41;
+		sgmii_phy42 = &sgmiiphy42;
+		sgmii_phy43 = &sgmiiphy43;
+		sgmii_phy44 = &sgmiiphy44;
+		phy_xfi1 = &xfiphy1;
+		phy_xfi2 = &xfiphy2;
+		phy_xfi3 = &xfiphy3;
+		phy_xfi4 = &xfiphy4;
+		xfi_pcs_mdio1 = &xfimdio0;
+		xfi_pcs_mdio2 = &xfimdio1;
+		xfi_pcs_mdio3 = &xfimdio2;
+		xfi_pcs_mdio4 = &xfimdio3;
+		emi1_rgmii = &t4240mdio0;
+		emi1_slot1 = &t4240mdio1;
+		emi1_slot2 = &t4240mdio2;
+		emi1_slot3 = &t4240mdio3;
+		emi1_slot4 = &t4240mdio4;
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 10MB for Linux Kernel Image */
+				reg = <0x00200000 0x00A00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@C00000 {
+				/* 500MB for Root file System Image */
+				reg = <0x00c00000 0x1F400000>;
+				label = "NAND RFS Image";
+			};
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio1>;
+				reg = <0x54 1>;
+				mux-mask = <0xe0>;
+
+				t4240mdio0: mdio@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					phyrgmii1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+
+					phyrgmii2: ethernet-phy@2 {
+						reg = <0x2>;
+					};
+				};
+
+				t4240mdio1: mdio@20 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x20>;
+					status = "disabled";
+
+					phy1: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy2: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+
+					phy3: ethernet-phy@2 {
+						reg = <0x2>;
+					};
+
+					phy4: ethernet-phy@3 {
+						reg = <0x3>;
+					};
+
+					sgmiiphy11: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy12: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy13: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy14: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t4240mdio2: mdio@40 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x40>;
+					status = "disabled";
+
+					phy5: ethernet-phy@4 {
+						reg = <0x4>;
+					};
+
+					phy6: ethernet-phy@5 {
+						reg = <0x5>;
+					};
+
+					phy7: ethernet-phy@6 {
+						reg = <0x6>;
+					};
+
+					phy8: ethernet-phy@7 {
+						reg = <0x7>;
+					};
+
+					sgmiiphy21: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy22: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy23: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy24: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t4240mdio3: mdio@60 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x60>;
+					status = "disabled";
+
+					phy9: ethernet-phy@8 {
+						reg = <0x8>;
+					};
+
+					phy10: ethernet-phy@9 {
+						reg = <0x9>;
+					};
+
+					phy11: ethernet-phy@a {
+						reg = <0xa>;
+					};
+
+					phy12: ethernet-phy@b {
+						reg = <0xb>;
+					};
+
+					sgmiiphy31: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy32: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy33: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy34: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t4240mdio4: mdio@80 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x80>;
+					status = "disabled";
+
+					phy13: ethernet-phy@c {
+						reg = <0xc>;
+					};
+
+					phy14: ethernet-phy@d {
+						reg = <0xd>;
+					};
+
+					phy15: ethernet-phy@e {
+						reg = <0xe>;
+					};
+
+					phy16: ethernet-phy@f {
+						reg = <0xf>;
+					};
+
+					sgmiiphy41: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy42: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy43: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy44: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					eeprom@51 {
+						compatible = "atmel,24c256";
+						reg = <0x51>;
+					};
+					eeprom@52 {
+						compatible = "atmel,24c256";
+						reg = <0x52>;
+					};
+					eeprom@53 {
+						compatible = "atmel,24c256";
+						reg = <0x53>;
+					};
+					eeprom@54 {
+						compatible = "atmel,24c256";
+						reg = <0x54>;
+					};
+					eeprom@55 {
+						compatible = "atmel,24c256";
+						reg = <0x55>;
+					};
+					eeprom@56 {
+						compatible = "atmel,24c256";
+						reg = <0x56>;
+					};
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+						interrupts = <0x1 0x1 0 0>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@41 {
+						compatible = "ti,ina220";
+						reg = <0x41>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@44 {
+						compatible = "ti,ina220";
+						reg = <0x44>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@45 {
+						compatible = "ti,ina220";
+						reg = <0x45>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@46 {
+						compatible = "ti,ina220";
+						reg = <0x46>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@47 {
+						compatible = "ti,ina220";
+						reg = <0x47>;
+						shunt-resistor = <1000>;
+					};
+				};
+			};
+		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
+
+		fman@400000 {
+			port@83000 {
+				status = "disabled";
+			};
+
+			port@84000 {
+				status = "disabled";
+			};
+
+			port@85000 {
+				status = "disabled";
+			};
+
+			port@86000 {
+				status = "disabled";
+			};
+
+			port@87000 {
+				status = "disabled";
+			};
+
+			ethernet@e0000 {
+				phy-handle = <&phy5>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy6>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy7>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy8>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phyrgmii2>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@ea000 {
+				phy-handle = <&phy2>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xauiphy1>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xauiphy2>;
+				phy-connection-type = "xgmii";
+			};
+
+			xfimdio0: mdio@f1000 {
+				status = "disabled";
+
+				xfiphy1: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+
+			xfimdio1: mdio@f3000 {
+				status = "disabled";
+
+				xfiphy2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
+
+		fman@500000 {
+			port@84000 {
+				status = "disabled";
+			};
+
+			port@85000 {
+				status = "disabled";
+			};
+
+			port@86000 {
+				status = "disabled";
+			};
+
+			port@87000 {
+				status = "disabled";
+			};
+
+			ethernet@e0000 {
+				phy-handle = <&phy13>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy14>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy15>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy16>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phyrgmii1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@ea000 {
+				phy-handle = <&phy10>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xauiphy3>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xauiphy4>;
+				phy-connection-type = "xgmii";
+			};
+
+			xfimdio2: mdio@f1000 {
+				status = "disabled";
+
+				xfiphy3: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+
+			xfimdio3: mdio@f3000 {
+				status = "disabled";
+
+				xfiphy4: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+
+			mdio@fd000 {
+				xauiphy1: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+
+				xauiphy2: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x1>;
+				};
+
+				xauiphy3: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+
+				xauiphy4: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x3>;
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+/include/ "t4240si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t4240rdb.dts b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
new file mode 100644
index 000000000..145896f2e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
@@ -0,0 +1,363 @@
+/*
+ * T4240RDB Device Tree Source
+ *
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t4240si-pre.dtsi"
+
+/ {
+	model = "fsl,T4240RDB";
+	compatible = "fsl,T4240RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		sgmii_phy21 = &sgmiiphy21;
+		sgmii_phy22 = &sgmiiphy22;
+		sgmii_phy23 = &sgmiiphy23;
+		sgmii_phy24 = &sgmiiphy24;
+		sgmii_phy41 = &sgmiiphy41;
+		sgmii_phy42 = &sgmiiphy42;
+		sgmii_phy43 = &sgmiiphy43;
+		sgmii_phy44 = &sgmiiphy44;
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			hwmon@2f {
+				compatible = "winbond,w83793";
+				reg = <0x2f>;
+			};
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+			};
+			eeprom@54 {
+				compatible = "atmel,24c256";
+				reg = <0x54>;
+			};
+			eeprom@56 {
+				compatible = "atmel,24c256";
+				reg = <0x56>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&sgmiiphy21>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&sgmiiphy22>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&sgmiiphy23>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&sgmiiphy24>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				status = "disabled";
+			};
+
+			ethernet@ea000 {
+				status = "disabled";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xfiphy1>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xfiphy2>;
+				phy-connection-type = "xgmii";
+			};
+		};
+
+		fman@500000 {
+			ethernet@e0000 {
+				phy-handle = <&sgmiiphy41>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&sgmiiphy42>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&sgmiiphy43>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&sgmiiphy44>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				status = "disabled";
+			};
+
+			ethernet@ea000 {
+				status = "disabled";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xfiphy3>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xfiphy4>;
+				phy-connection-type = "xgmii";
+			};
+
+			mdio@fc000 {
+				sgmiiphy21: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				sgmiiphy22: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+
+				sgmiiphy23: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+
+				sgmiiphy24: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+
+				sgmiiphy41: ethernet-phy@4 {
+					reg = <0x4>;
+				};
+
+				sgmiiphy42: ethernet-phy@5 {
+					reg = <0x5>;
+				};
+
+				sgmiiphy43: ethernet-phy@6 {
+					reg = <0x6>;
+				};
+
+				sgmiiphy44: ethernet-phy@7 {
+					reg = <0x7>;
+				};
+			};
+
+			mdio@fd000 {
+				xfiphy1: ethernet-phy@10 {
+					compatible = "ethernet-phy-id13e5.1002";
+					reg = <0x10>;
+				};
+
+				xfiphy2: ethernet-phy@11 {
+					compatible = "ethernet-phy-id13e5.1002";
+					reg = <0x11>;
+				};
+
+				xfiphy3: ethernet-phy@13 {
+					compatible = "ethernet-phy-id13e5.1002";
+					reg = <0x13>;
+				};
+
+				xfiphy4: ethernet-phy@12 {
+					compatible = "ethernet-phy-id13e5.1002";
+					reg = <0x12>;
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+/include/ "t4240si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
new file mode 100644
index 000000000..65f3e17c0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -0,0 +1,1111 @@
+/*
+ * T4240 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc";
+	interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x240000 */
+&pci0 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x250000 */
+&pci1 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x260000 */
+&pci2 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x270000 */
+&pci3 {
+	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <23 2 0 0>;
+	pcie@0 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		reg = <0 0 0 0 0>;
+		interrupts = <23 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t4240-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0
+			      94 2 0 0
+			      95 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t4240-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,t4240-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t4240-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-ddr@14000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr3>;
+		reg = <0x14000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t4240-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t4240-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-snpc@32000 {
+		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x32000 0x1000 0x1062000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@120000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu4>;
+		reg = <0x120000 0x1000 0x121000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@128000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu5>;
+		reg = <0x128000 0x1000 0x129000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@130000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu6>;
+		reg = <0x130000 0x1000 0x131000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@138000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu7>;
+		reg = <0x138000 0x1000 0x139000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@140000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu8>;
+		reg = <0x140000 0x1000 0x141000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@148000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu9>;
+		reg = <0x148000 0x1000 0x149000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@150000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu10>;
+		reg = <0x150000 0x1000 0x151000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@158000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu11>;
+		reg = <0x158000 0x1000 0x159000 0x1000>;
+	};
+};
+
+&bportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <105 2 0 0>;
+	};
+	bman-portal@4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <107 2 0 0>;
+	};
+	bman-portal@8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <109 2 0 0>;
+	};
+	bman-portal@c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <111 2 0 0>;
+	};
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <113 2 0 0>;
+	};
+	bman-portal@14000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <115 2 0 0>;
+	};
+	bman-portal@18000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <117 2 0 0>;
+	};
+	bman-portal@1c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <119 2 0 0>;
+	};
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <121 2 0 0>;
+	};
+	bman-portal@24000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <123 2 0 0>;
+	};
+	bman-portal@28000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <125 2 0 0>;
+	};
+	bman-portal@2c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <127 2 0 0>;
+	};
+	bman-portal@30000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <129 2 0 0>;
+	};
+	bman-portal@34000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <131 2 0 0>;
+	};
+	bman-portal@38000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <133 2 0 0>;
+	};
+	bman-portal@3c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <135 2 0 0>;
+	};
+	bman-portal@40000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <137 2 0 0>;
+	};
+	bman-portal@44000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <139 2 0 0>;
+	};
+	bman-portal@48000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+		interrupts = <141 2 0 0>;
+	};
+	bman-portal@4c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+		interrupts = <143 2 0 0>;
+	};
+	bman-portal@50000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+		interrupts = <145 2 0 0>;
+	};
+	bman-portal@54000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+		interrupts = <147 2 0 0>;
+	};
+	bman-portal@58000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+		interrupts = <149 2 0 0>;
+	};
+	bman-portal@5c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+		interrupts = <151 2 0 0>;
+	};
+	bman-portal@60000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+		interrupts = <153 2 0 0>;
+	};
+	bman-portal@64000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x64000 0x4000>, <0x1019000 0x1000>;
+		interrupts = <155 2 0 0>;
+	};
+	bman-portal@68000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x68000 0x4000>, <0x101a000 0x1000>;
+		interrupts = <157 2 0 0>;
+	};
+	bman-portal@6c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x6c000 0x4000>, <0x101b000 0x1000>;
+		interrupts = <159 2 0 0>;
+	};
+	bman-portal@70000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x70000 0x4000>, <0x101c000 0x1000>;
+		interrupts = <161 2 0 0>;
+	};
+	bman-portal@74000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x74000 0x4000>, <0x101d000 0x1000>;
+		interrupts = <163 2 0 0>;
+	};
+	bman-portal@78000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x78000 0x4000>, <0x101e000 0x1000>;
+		interrupts = <165 2 0 0>;
+	};
+	bman-portal@7c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x7c000 0x4000>, <0x101f000 0x1000>;
+		interrupts = <167 2 0 0>;
+	};
+	bman-portal@80000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x80000 0x4000>, <0x1020000 0x1000>;
+		interrupts = <169 2 0 0>;
+	};
+	bman-portal@84000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x84000 0x4000>, <0x1021000 0x1000>;
+		interrupts = <171 2 0 0>;
+	};
+	bman-portal@88000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x88000 0x4000>, <0x1022000 0x1000>;
+		interrupts = <173 2 0 0>;
+	};
+	bman-portal@8c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x8c000 0x4000>, <0x1023000 0x1000>;
+		interrupts = <175 2 0 0>;
+	};
+	bman-portal@90000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x90000 0x4000>, <0x1024000 0x1000>;
+		interrupts = <385 2 0 0>;
+	};
+	bman-portal@94000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x94000 0x4000>, <0x1025000 0x1000>;
+		interrupts = <387 2 0 0>;
+	};
+	bman-portal@98000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x98000 0x4000>, <0x1026000 0x1000>;
+		interrupts = <389 2 0 0>;
+	};
+	bman-portal@9c000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x9c000 0x4000>, <0x1027000 0x1000>;
+		interrupts = <391 2 0 0>;
+	};
+	bman-portal@a0000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xa0000 0x4000>, <0x1028000 0x1000>;
+		interrupts = <393 2 0 0>;
+	};
+	bman-portal@a4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xa4000 0x4000>, <0x1029000 0x1000>;
+		interrupts = <395 2 0 0>;
+	};
+	bman-portal@a8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xa8000 0x4000>, <0x102a000 0x1000>;
+		interrupts = <397 2 0 0>;
+	};
+	bman-portal@ac000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xac000 0x4000>, <0x102b000 0x1000>;
+		interrupts = <399 2 0 0>;
+	};
+	bman-portal@b0000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xb0000 0x4000>, <0x102c000 0x1000>;
+		interrupts = <401 2 0 0>;
+	};
+	bman-portal@b4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xb4000 0x4000>, <0x102d000 0x1000>;
+		interrupts = <403 2 0 0>;
+	};
+	bman-portal@b8000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xb8000 0x4000>, <0x102e000 0x1000>;
+		interrupts = <405 2 0 0>;
+	};
+	bman-portal@bc000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xbc000 0x4000>, <0x102f000 0x1000>;
+		interrupts = <407 2 0 0>;
+	};
+	bman-portal@c0000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc0000 0x4000>, <0x1030000 0x1000>;
+		interrupts = <409 2 0 0>;
+	};
+	bman-portal@c4000 {
+		compatible = "fsl,bman-portal";
+		reg = <0xc4000 0x4000>, <0x1031000 0x1000>;
+		interrupts = <411 2 0 0>;
+	};
+};
+
+&qportals {
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x1000000 0x1000>;
+		interrupts = <104 0x2 0 0>;
+		cell-index = <0x0>;
+	};
+	qportal1: qman-portal@4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4000 0x4000>, <0x1001000 0x1000>;
+		interrupts = <106 0x2 0 0>;
+		cell-index = <0x1>;
+	};
+	qportal2: qman-portal@8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8000 0x4000>, <0x1002000 0x1000>;
+		interrupts = <108 0x2 0 0>;
+		cell-index = <0x2>;
+	};
+	qportal3: qman-portal@c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc000 0x4000>, <0x1003000 0x1000>;
+		interrupts = <110 0x2 0 0>;
+		cell-index = <0x3>;
+	};
+	qportal4: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x1004000 0x1000>;
+		interrupts = <112 0x2 0 0>;
+		cell-index = <0x4>;
+	};
+	qportal5: qman-portal@14000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x14000 0x4000>, <0x1005000 0x1000>;
+		interrupts = <114 0x2 0 0>;
+		cell-index = <0x5>;
+	};
+	qportal6: qman-portal@18000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x18000 0x4000>, <0x1006000 0x1000>;
+		interrupts = <116 0x2 0 0>;
+		cell-index = <0x6>;
+	};
+	qportal7: qman-portal@1c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
+		interrupts = <118 0x2 0 0>;
+		cell-index = <0x7>;
+	};
+	qportal8: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x1008000 0x1000>;
+		interrupts = <120 0x2 0 0>;
+		cell-index = <0x8>;
+	};
+	qportal9: qman-portal@24000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x24000 0x4000>, <0x1009000 0x1000>;
+		interrupts = <122 0x2 0 0>;
+		cell-index = <0x9>;
+	};
+	qportal10: qman-portal@28000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x28000 0x4000>, <0x100a000 0x1000>;
+		interrupts = <124 0x2 0 0>;
+		cell-index = <0xa>;
+	};
+	qportal11: qman-portal@2c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
+		interrupts = <126 0x2 0 0>;
+		cell-index = <0xb>;
+	};
+	qportal12: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x100c000 0x1000>;
+		interrupts = <128 0x2 0 0>;
+		cell-index = <0xc>;
+	};
+	qportal13: qman-portal@34000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x34000 0x4000>, <0x100d000 0x1000>;
+		interrupts = <130 0x2 0 0>;
+		cell-index = <0xd>;
+	};
+	qportal14: qman-portal@38000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x38000 0x4000>, <0x100e000 0x1000>;
+		interrupts = <132 0x2 0 0>;
+		cell-index = <0xe>;
+	};
+	qportal15: qman-portal@3c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
+		interrupts = <134 0x2 0 0>;
+		cell-index = <0xf>;
+	};
+	qportal16: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x1010000 0x1000>;
+		interrupts = <136 0x2 0 0>;
+		cell-index = <0x10>;
+	};
+	qportal17: qman-portal@44000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x44000 0x4000>, <0x1011000 0x1000>;
+		interrupts = <138 0x2 0 0>;
+		cell-index = <0x11>;
+	};
+	qportal18: qman-portal@48000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x48000 0x4000>, <0x1012000 0x1000>;
+		interrupts = <140 0x2 0 0>;
+		cell-index = <0x12>;
+	};
+	qportal19: qman-portal@4c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
+		interrupts = <142 0x2 0 0>;
+		cell-index = <0x13>;
+	};
+	qportal20: qman-portal@50000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x50000 0x4000>, <0x1014000 0x1000>;
+		interrupts = <144 0x2 0 0>;
+		cell-index = <0x14>;
+	};
+	qportal21: qman-portal@54000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x54000 0x4000>, <0x1015000 0x1000>;
+		interrupts = <146 0x2 0 0>;
+		cell-index = <0x15>;
+	};
+	qportal22: qman-portal@58000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x58000 0x4000>, <0x1016000 0x1000>;
+		interrupts = <148 0x2 0 0>;
+		cell-index = <0x16>;
+	};
+	qportal23: qman-portal@5c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
+		interrupts = <150 0x2 0 0>;
+		cell-index = <0x17>;
+	};
+	qportal24: qman-portal@60000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x60000 0x4000>, <0x1018000 0x1000>;
+		interrupts = <152 0x2 0 0>;
+		cell-index = <0x18>;
+	};
+	qportal25: qman-portal@64000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x64000 0x4000>, <0x1019000 0x1000>;
+		interrupts = <154 0x2 0 0>;
+		cell-index = <0x19>;
+	};
+	qportal26: qman-portal@68000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x68000 0x4000>, <0x101a000 0x1000>;
+		interrupts = <156 0x2 0 0>;
+		cell-index = <0x1a>;
+	};
+	qportal27: qman-portal@6c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x6c000 0x4000>, <0x101b000 0x1000>;
+		interrupts = <158 0x2 0 0>;
+		cell-index = <0x1b>;
+	};
+	qportal28: qman-portal@70000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x70000 0x4000>, <0x101c000 0x1000>;
+		interrupts = <160 0x2 0 0>;
+		cell-index = <0x1c>;
+	};
+	qportal29: qman-portal@74000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x74000 0x4000>, <0x101d000 0x1000>;
+		interrupts = <162 0x2 0 0>;
+		cell-index = <0x1d>;
+	};
+	qportal30: qman-portal@78000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x78000 0x4000>, <0x101e000 0x1000>;
+		interrupts = <164 0x2 0 0>;
+		cell-index = <0x1e>;
+	};
+	qportal31: qman-portal@7c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x7c000 0x4000>, <0x101f000 0x1000>;
+		interrupts = <166 0x2 0 0>;
+		cell-index = <0x1f>;
+	};
+	qportal32: qman-portal@80000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x80000 0x4000>, <0x1020000 0x1000>;
+		interrupts = <168 0x2 0 0>;
+		cell-index = <0x20>;
+	};
+	qportal33: qman-portal@84000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x84000 0x4000>, <0x1021000 0x1000>;
+		interrupts = <170 0x2 0 0>;
+		cell-index = <0x21>;
+	};
+	qportal34: qman-portal@88000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x88000 0x4000>, <0x1022000 0x1000>;
+		interrupts = <172 0x2 0 0>;
+		cell-index = <0x22>;
+	};
+	qportal35: qman-portal@8c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x8c000 0x4000>, <0x1023000 0x1000>;
+		interrupts = <174 0x2 0 0>;
+		cell-index = <0x23>;
+	};
+	qportal36: qman-portal@90000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x90000 0x4000>, <0x1024000 0x1000>;
+		interrupts = <384 0x2 0 0>;
+		cell-index = <0x24>;
+	};
+	qportal37: qman-portal@94000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x94000 0x4000>, <0x1025000 0x1000>;
+		interrupts = <386 0x2 0 0>;
+		cell-index = <0x25>;
+	};
+	qportal38: qman-portal@98000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x98000 0x4000>, <0x1026000 0x1000>;
+		interrupts = <388 0x2 0 0>;
+		cell-index = <0x26>;
+	};
+	qportal39: qman-portal@9c000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x9c000 0x4000>, <0x1027000 0x1000>;
+		interrupts = <390 0x2 0 0>;
+		cell-index = <0x27>;
+	};
+	qportal40: qman-portal@a0000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xa0000 0x4000>, <0x1028000 0x1000>;
+		interrupts = <392 0x2 0 0>;
+		cell-index = <0x28>;
+	};
+	qportal41: qman-portal@a4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xa4000 0x4000>, <0x1029000 0x1000>;
+		interrupts = <394 0x2 0 0>;
+		cell-index = <0x29>;
+	};
+	qportal42: qman-portal@a8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xa8000 0x4000>, <0x102a000 0x1000>;
+		interrupts = <396 0x2 0 0>;
+		cell-index = <0x2a>;
+	};
+	qportal43: qman-portal@ac000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xac000 0x4000>, <0x102b000 0x1000>;
+		interrupts = <398 0x2 0 0>;
+		cell-index = <0x2b>;
+	};
+	qportal44: qman-portal@b0000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xb0000 0x4000>, <0x102c000 0x1000>;
+		interrupts = <400 0x2 0 0>;
+		cell-index = <0x2c>;
+	};
+	qportal45: qman-portal@b4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xb4000 0x4000>, <0x102d000 0x1000>;
+		interrupts = <402 0x2 0 0>;
+		cell-index = <0x2d>;
+	};
+	qportal46: qman-portal@b8000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xb8000 0x4000>, <0x102e000 0x1000>;
+		interrupts = <404 0x2 0 0>;
+		cell-index = <0x2e>;
+	};
+	qportal47: qman-portal@bc000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xbc000 0x4000>, <0x102f000 0x1000>;
+		interrupts = <406 0x2 0 0>;
+		cell-index = <0x2f>;
+	};
+	qportal48: qman-portal@c0000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc0000 0x4000>, <0x1030000 0x1000>;
+		interrupts = <408 0x2 0 0>;
+		cell-index = <0x30>;
+	};
+	qportal49: qman-portal@c4000 {
+		compatible = "fsl,qman-portal";
+		reg = <0xc4000 0x4000>, <0x1031000 0x1000>;
+		interrupts = <410 0x2 0 0>;
+		cell-index = <0x31>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	ddr3: memory-controller@a000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0xa000 0x1000>;
+		interrupts = <16 2 1 21>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t4240-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000
+		       0x12000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26
+			      16 2 1 25>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x6000>;
+		fsl,portid-mapping = <0x8000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "qoriq-mpic4.3.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+/include/ "qoriq-clockgen2.dtsi"
+	global-utilities@e1000 {
+		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t4240-sfp";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t4240-serdes";
+		reg	   = <0xea000 0x4000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+/include/ "elo3-dma-2.dtsi"
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t4240-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+			phy_type = "utmi";
+			port0;
+		};
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec5.0-0.dtsi"
+/include/ "qoriq-qman3.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+/include/ "qoriq-fman3-0-1g-4.dtsi"
+/include/ "qoriq-fman3-0-1g-5.dtsi"
+/include/ "qoriq-fman3-0-10g-0.dtsi"
+/include/ "qoriq-fman3-0-10g-1.dtsi"
+	fman@400000 {
+		enet0: ethernet@e0000 {
+		};
+
+		enet1: ethernet@e2000 {
+		};
+
+		enet2: ethernet@e4000 {
+		};
+
+		enet3: ethernet@e6000 {
+		};
+
+		enet4: ethernet@e8000 {
+		};
+
+		enet5: ethernet@ea000 {
+		};
+
+		enet6: ethernet@f0000 {
+		};
+
+		enet7: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			status = "disabled";
+		};
+
+		mdio@fd000 {
+			status = "disabled";
+		};
+	};
+
+/include/ "qoriq-fman3-1.dtsi"
+/include/ "qoriq-fman3-1-1g-0.dtsi"
+/include/ "qoriq-fman3-1-1g-1.dtsi"
+/include/ "qoriq-fman3-1-1g-2.dtsi"
+/include/ "qoriq-fman3-1-1g-3.dtsi"
+/include/ "qoriq-fman3-1-1g-4.dtsi"
+/include/ "qoriq-fman3-1-1g-5.dtsi"
+/include/ "qoriq-fman3-1-10g-0.dtsi"
+/include/ "qoriq-fman3-1-10g-1.dtsi"
+	fman@500000 {
+		enet8: ethernet@e0000 {
+		};
+
+		enet9: ethernet@e2000 {
+		};
+
+		enet10: ethernet@e4000 {
+		};
+
+		enet11: ethernet@e6000 {
+		};
+
+		enet12: ethernet@e8000 {
+		};
+
+		enet13: ethernet@ea000 {
+		};
+
+		enet14: ethernet@f0000 {
+		};
+
+		enet15: ethernet@f2000 {
+		};
+
+		mdio@fc000 {
+			interrupts = <100 1 0 0>;
+		};
+
+		mdio@fd000 {
+			interrupts = <101 1 0 0>;
+		};
+	};
+
+	L2_1: l2-cache-controller@c20000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+	L2_2: l2-cache-controller@c60000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xc60000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+	L2_3: l2-cache-controller@ca0000 {
+		compatible = "fsl,t4240-l2-cache-controller";
+		reg = <0xca0000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
new file mode 100644
index 000000000..632314c6f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
@@ -0,0 +1,175 @@
+/*
+ * T4240 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+	compatible = "fsl,T4240";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		crypto = &crypto;
+
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		dma2 = &dma2;
+		sdhc = &sdhc;
+
+		fman0 = &fman0;
+		fman1 = &fman1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		ethernet8 = &enet8;
+		ethernet9 = &enet9;
+		ethernet10 = &enet10;
+		ethernet11 = &enet11;
+		ethernet12 = &enet12;
+		ethernet13 = &enet13;
+		ethernet14 = &enet14;
+		ethernet15 = &enet15;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu4: PowerPC,e6500@8 {
+			device_type = "cpu";
+			reg = <8 9>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
+		};
+		cpu5: PowerPC,e6500@10 {
+			device_type = "cpu";
+			reg = <10 11>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
+		};
+		cpu6: PowerPC,e6500@12 {
+			device_type = "cpu";
+			reg = <12 13>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
+		};
+		cpu7: PowerPC,e6500@14 {
+			device_type = "cpu";
+			reg = <14 15>;
+			clocks = <&clockgen 1 1>;
+			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
+		};
+		cpu8: PowerPC,e6500@16 {
+			device_type = "cpu";
+			reg = <16 17>;
+			clocks = <&clockgen 1 2>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
+		};
+		cpu9: PowerPC,e6500@18 {
+			device_type = "cpu";
+			reg = <18 19>;
+			clocks = <&clockgen 1 2>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
+		};
+		cpu10: PowerPC,e6500@20 {
+			device_type = "cpu";
+			reg = <20 21>;
+			clocks = <&clockgen 1 2>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
+		};
+		cpu11: PowerPC,e6500@22 {
+			device_type = "cpu";
+			reg = <22 23>;
+			clocks = <&clockgen 1 2>;
+			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsp2.dts b/arch/powerpc/boot/dts/fsp2.dts
new file mode 100644
index 000000000..9311b86b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsp2.dts
@@ -0,0 +1,613 @@
+/*
+ * Device Tree Source for FSP2
+ *
+ * Copyright 2010,2012 IBM Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,fsp2";
+	compatible = "ibm,fsp2";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC, 476FSP2";
+			reg = <0x0>;
+			clock-frequency = <0>;    /* Filled in by cuboot */
+			timebase-frequency = <0>; /* Filled in by cuboot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by
+							     cuboot */
+	};
+
+	clocks {
+		mmc_clk: mmc_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			clock-output-names = "mmc_clk";
+		};
+	};
+
+	UIC0: uic0 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x2c0 0x8>;
+	};
+
+	/* "interrupts" field is <bit level bit level>
+	   first pair is non-critical, second is critical */
+	UIC1_0: uic1_0 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x2c8 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <21 0x4 4 0x84>;
+	};
+
+	/* PSI and DMA */
+	UIC1_1: uic1_1 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x350 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <22 0x4 5 0x84>;
+	};
+
+	/* Ethernet and USB */
+	UIC1_2: uic1_2 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x358 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <23 0x4 6 0x84>;
+	};
+
+	/* PLB Errors */
+	UIC1_3: uic1_3 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <4>;
+		dcr-reg = <0x360 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <24 0x4 7 0x84>;
+	};
+
+	UIC1_4: uic1_4 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <5>;
+		dcr-reg = <0x368 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <25 0x4 8 0x84>;
+	};
+
+	UIC1_5: uic1_5 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <6>;
+		dcr-reg = <0x370 0x8>;
+		interrupt-parent = <&UIC0>;
+		interrupts = <26 0x4 9 0x84>;
+	};
+
+	/* 2nd level UICs for FSI */
+	UIC2_0: uic2_0 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <7>;
+		dcr-reg = <0x2d0 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <16 0x4 0 0x84>;
+	};
+
+	UIC2_1: uic2_1 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <8>;
+		dcr-reg = <0x2d8 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <17 0x4 1 0x84>;
+	};
+
+	UIC2_2: uic2_2 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <9>;
+		dcr-reg = <0x2e0 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <18 0x4 2 0x84>;
+	};
+
+	UIC2_3: uic2_3 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <10>;
+		dcr-reg = <0x2e8 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <19 0x4 3 0x84>;
+	};
+
+	UIC2_4: uic2_4 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <11>;
+		dcr-reg = <0x2f0 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <20 0x4 4 0x84>;
+	};
+
+	UIC2_5: uic2_5 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <12>;
+		dcr-reg = <0x2f8 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <21 0x4 5 0x84>;
+	};
+
+	UIC2_6: uic2_6 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <13>;
+		dcr-reg = <0x300 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <22 0x4 6 0x84>;
+	};
+
+	UIC2_7: uic2_7 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <14>;
+		dcr-reg = <0x308 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <23 0x4 7 0x84>;
+	};
+
+	UIC2_8: uic2_8 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <15>;
+		dcr-reg = <0x310 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <24 0x4 8 0x84>;
+	};
+
+	UIC2_9: uic2_9 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <16>;
+		dcr-reg = <0x318 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <25 0x4 9 0x84>;
+	};
+
+	UIC2_10: uic2_10 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <17>;
+		dcr-reg = <0x320 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <26 0x4 10 0x84>;
+	};
+
+	UIC2_11: uic2_11 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <18>;
+		dcr-reg = <0x328 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <27 0x4 11 0x84>;
+	};
+
+	UIC2_12: uic2_12 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <19>;
+		dcr-reg = <0x330 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <28 0x4 12 0x84>;
+	};
+
+	UIC2_13: uic2_13 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <20>;
+		dcr-reg = <0x338 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <29 0x4 13 0x84>;
+	};
+
+	UIC2_14: uic2_14 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <21>;
+		dcr-reg = <0x340 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <30 0x4 14 0x84>;
+	};
+
+	UIC2_15: uic2_15 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <22>;
+		dcr-reg = <0x348 0x8>;
+		interrupt-parent = <&UIC1_0>;
+		interrupts = <31 0x4 15 0x84>;
+	};
+
+	plb6 {
+		compatible = "ibm,plb6";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		MCW0: memory-controller-wrapper {
+			compatible = "ibm,cw-476fsp2";
+			dcr-reg = <0x11111800 0x40>;
+		};
+
+		MCIF0: memory-controller {
+			compatible = "ibm,sdram-476fsp2", "ibm,sdram-4xx-ddr3";
+			dcr-reg = <0x11120000 0x10000>;
+			mcer-device = <&MCW0>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <10 0x84   /* ECC UE */
+				      11 0x84>; /* ECC CE */
+		};
+	};
+
+	plb4 {
+		compatible = "ibm,plb4";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000010 0x00000000 0x80000000
+			  0x80000000 0x00000010 0x80000000 0x80000000>;
+		clock-frequency = <333333334>;
+
+		plb6-system-hung-irq {
+			compatible = "ibm,bus-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0 0x84>;
+		};
+
+		l2-error-irq {
+			compatible = "ibm,bus-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <20 0x84>;
+		};
+
+		plb6-plb4-irq {
+			compatible = "ibm,bus-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <1 0x84>;
+		};
+
+		plb4-ahb-irq {
+			compatible = "ibm,bus-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC1_3>;
+			interrupts = <20 0x84>;
+		};
+
+		opbd-error-irq {
+			compatible = "ibm,opbd-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC1_4>;
+			interrupts = <5 0x84>;
+		};
+
+		cmu-error-irq {
+			compatible = "ibm,cmu-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <28 0x84>;
+		};
+
+		conf-error-irq {
+			compatible = "ibm,conf-error-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC1_4>;
+			interrupts = <11 0x84>;
+		};
+
+		mc-ue-irq {
+			compatible = "ibm,mc-ue-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <10 0x84>;
+		};
+
+		reset-warning-irq {
+			compatible = "ibm,reset-warning-irq";
+			#interrupt-cells = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <17 0x84>;
+		};
+
+		MAL0: mcmal0 {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "ibm,mcmal";
+			dcr-reg = <0x80 0x80>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			/* index interrupt-parent interrupt# type */
+			interrupt-map = </*TXEOB*/ 0 &UIC1_2 4 0x4
+					 /*RXEOB*/ 1 &UIC1_2 3 0x4
+					 /*SERR*/  2 &UIC1_2 7 0x4
+					 /*TXDE*/  3 &UIC1_2 6 0x4
+					 /*RXDE*/  4 &UIC1_2 5 0x4>;
+		};
+
+		MAL1: mcmal1 {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "ibm,mcmal";
+			dcr-reg = <0x100 0x80>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL1>;
+			interrupts = <0 1 2 3 4>;
+			/* index interrupt-parent interrupt# type */
+			interrupt-map = </*TXEOB*/ 0 &UIC1_2 12 0x4
+					 /*RXEOB*/ 1 &UIC1_2 11 0x4
+					 /*SERR*/  2 &UIC1_2 15 0x4
+					 /*TXDE*/  3 &UIC1_2 14 0x4
+					 /*RXDE*/  4 &UIC1_2 13 0x4>;
+		};
+
+		mmc0: mmc@20c0000 {
+			compatible	= "st,sdhci-stih407", "st,sdhci";
+			reg		= <0x020c0000 0x20000>;
+			reg-names	= "mmc";
+			interrupts	= <21 0x4>;
+			interrupt-parent = <&UIC1_3>;
+			interrupt-names	= "mmcirq";
+			pinctrl-names	= "default";
+			pinctrl-0	= <>;
+			clock-names	= "mmc";
+			clocks		= <&mmc_clk>;
+			bus-width	= <4>;
+			non-removable;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			sd-uhs-ddr50;
+		};
+
+		opb {
+			compatible = "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges; // pass-thru to parent bus
+			clock-frequency = <83333334>;
+
+			EMAC0: ethernet@b0000000 {
+				linux,network-index = <0>;
+				device_type = "network";
+				compatible = "ibm,emac4sync";
+				has-inverted-stacr-oc;
+				interrupt-parent = <&UIC1_2>;
+				interrupts = <1 0x4 0 0x4>;
+				reg = <0xb0000000 0x100>;
+				local-mac-address = [000000000000]; /* Filled in by
+							       cuboot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <4096>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <8192>;
+				phy-address = <1>;
+				phy-mode = "rgmii";
+				phy-map = <00000003>;
+				rgmii-device = <&RGMII>;
+				rgmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@b0000100 {
+				linux,network-index = <1>;
+				device_type = "network";
+				compatible = "ibm,emac4sync";
+				has-inverted-stacr-oc;
+				interrupt-parent = <&UIC1_2>;
+				interrupts = <9 0x4 8 0x4>;
+				reg = <0xb0000100 0x100>;
+				local-mac-address = [000000000000]; /* Filled in by
+							       cuboot */
+				mal-device = <&MAL1>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <1>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <4096>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <8192>;
+				phy-address = <2>;
+				phy-mode = "rgmii";
+				phy-map = <00000003>;
+				rgmii-device = <&RGMII>;
+				rgmii-channel = <1>;
+			};
+
+			RGMII: rgmii@b0000600 {
+				compatible = "ibm,rgmii";
+				has-mdio;
+				reg = <0xb0000600 0x8>;
+			};
+
+			UART0: serial@b0020000 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xb0020000 0x8>;
+				virtual-reg = <0xb0020000>;
+				clock-frequency = <20833333>;
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <31 0x4>;
+			};
+		};
+
+		OHCI1: ohci@2040000 {
+			compatible = "ohci-le";
+			reg = <0x02040000 0xa0>;
+			interrupt-parent = <&UIC1_3>;
+			interrupts = <28 0x8 29 0x8>;
+		};
+
+		OHCI2: ohci@2080000 {
+			compatible = "ohci-le";
+			reg = <0x02080000 0xa0>;
+			interrupt-parent = <&UIC1_3>;
+			interrupts = <30 0x8 31 0x8>;
+		};
+
+		EHCI: ehci@2000000 {
+			compatible = "usb-ehci";
+			reg = <0x02000000 0xa4>;
+			interrupt-parent = <&UIC1_3>;
+			interrupts = <23 0x4>;
+		};
+
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@b0020000";
+		bootargs = "console=ttyS0,115200 rw log_buf_len=32768 debug";
+	};
+};
diff --git a/arch/powerpc/boot/dts/gamecube.dts b/arch/powerpc/boot/dts/gamecube.dts
new file mode 100644
index 000000000..a564cb7cb
--- /dev/null
+++ b/arch/powerpc/boot/dts/gamecube.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/powerpc/boot/dts/gamecube.dts
+ *
+ * Nintendo GameCube platform device tree source
+ * Copyright (C) 2007-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ */
+
+/dts-v1/;
+
+/ {
+	model = "nintendo,gamecube";
+	compatible = "nintendo,gamecube";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "root=/dev/gcnsda2 rootwait udbg-immortal";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x01800000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,gekko@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <486000000>; /* 486MHz */
+			bus-frequency = <162000000>; /* 162MHz core-to-bus 3x */
+			timebase-frequency = <40500000>; /* 162MHz / 4 */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+		};
+	};
+
+	/* devices contained int the flipper chipset */
+	flipper {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "nintendo,flipper";
+		ranges = <0x0c000000 0x0c000000 0x00010000>;
+		interrupt-parent = <&PIC>;
+
+		video@c002000 {
+			compatible = "nintendo,flipper-vi";
+			reg = <0x0c002000 0x100>;
+			interrupts = <8>;
+		};
+
+		processor-interface@c003000 {
+			compatible = "nintendo,flipper-pi";
+			reg = <0x0c003000 0x100>;
+
+			PIC: pic {
+				#interrupt-cells = <1>;
+				compatible = "nintendo,flipper-pic";
+				interrupt-controller;
+			};
+		};
+
+		dsp@c005000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "nintendo,flipper-dsp";
+			reg = <0x0c005000 0x200>;
+			interrupts = <6>;
+
+			memory@0 {
+				compatible = "nintendo,flipper-aram";
+				reg = <0 0x1000000>;	/* 16MB */
+			};
+		};
+
+		disk@c006000 {
+			compatible = "nintendo,flipper-di";
+			reg = <0x0c006000 0x40>;
+			interrupts = <2>;
+		};
+
+		audio@c006c00 {
+			compatible = "nintendo,flipper-ai";
+			reg = <0x0c006c00 0x20>;
+			interrupts = <6>;
+		};
+
+		gamepad-controller@c006400 {
+			compatible = "nintendo,flipper-si";
+			reg = <0x0c006400 0x100>;
+			interrupts = <3>;
+		};
+
+		/* External Interface bus */
+		exi@c006800 {
+			compatible = "nintendo,flipper-exi";
+			reg = <0x0c006800 0x40>;
+			virtual-reg = <0x0c006800>;
+			interrupts = <4>;
+		};
+        };
+};
+
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
new file mode 100644
index 000000000..e84ff1afb
--- /dev/null
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -0,0 +1,576 @@
+/*
+ * Device Tree Source for AMCC Glacier (460GT)
+ *
+ * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,glacier";
+	compatible = "amcc,glacier";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		ethernet3 = &EMAC3;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460GT";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			next-level-cache = <&L2C0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460gt";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460gt";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460gt", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460gt-crypto", "amcc,ppc460ex-crypto",
+				"amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
+		HWRNG: hwrng@110000 {
+			compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+			reg = <4 0x00110000 0x50>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <32>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460gt", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460gt", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART2: serial@ef600500 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <28 0x4>;
+			};
+
+			UART3: serial@ef600600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <29 0x4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "st,m41t80";
+					reg = <0x68>;
+					interrupt-parent = <&UIC2>;
+					interrupts = <0x19 0x8>;
+				};
+				sttm@48 {
+					compatible = "ad,ad7414";
+					reg = <0x48>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x14 0x8>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-460gt", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+				reg = <0xef601500 0x00000008>;
+				has-mdio;
+			};
+
+			RGMII1: emac-rgmii@ef601600 {
+				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+				reg = <0xef601600 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601350 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <0xef601450 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef601100 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC3: ethernet@ef601200 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4sync";
+				interrupt-parent = <&EMAC3>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x17 0x4>;
+				reg = <0xef601200 0x000000c4>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <3>;
+				mal-rx-channel = <24>;
+				cell-index = <3>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				tx-fifo-size-gige = <16384>; /* emac2&3 only */
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 0 to 0x3f */
+			bus-range = <0x0 0x3f>;
+
+			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+		};
+
+		PCIE0: pcie@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pcie@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 80 to 0xbf */
+			bus-range = <0x80 0xbf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts
new file mode 100644
index 000000000..02bd304c7
--- /dev/null
+++ b/arch/powerpc/boot/dts/holly.dts
@@ -0,0 +1,196 @@
+/*
+ * Device Tree Source for IBM Holly (PPC 750CL with TSI controller)
+ * Copyright 2007, IBM Corporation
+ *
+ * Stephen Winiecki <stevewin@us.ibm.com>
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "41K7339";
+	compatible = "ibm,holly";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells =<0>;
+		PowerPC,750CL@0 {
+			device_type = "cpu";
+			reg = <0x00000000>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			d-cache-sets = <128>;
+			i-cache-sets = <128>;
+			timebase-frequency = <50000000>;
+			clock-frequency = <600000000>;
+			bus-frequency = <200000000>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+  	tsi109@c0000000 {
+		device_type = "tsi-bridge";
+		compatible = "tsi109-bridge", "tsi108-bridge";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0xc0000000 0x00010000>;
+		reg = <0xc0000000 0x00010000>;
+
+		i2c@7000 {
+			device_type = "i2c";
+			compatible  = "tsi109-i2c", "tsi108-i2c";
+			interrupt-parent = <&MPIC>;
+			interrupts = <0xe 0x2>;
+			reg = <0x00007000 0x00000400>;
+		};
+
+		MDIO: mdio@6000 {
+			compatible = "tsi109-mdio", "tsi108-mdio";
+			reg = <0x00006000 0x00000050>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			PHY1: ethernet-phy@1 {
+				compatible = "bcm5461a";
+				reg = <0x00000001>;
+				txc-rxc-delay-disable;
+			};
+
+			PHY2: ethernet-phy@2 {
+				compatible = "bcm5461a";
+				reg = <0x00000002>;
+				txc-rxc-delay-disable;
+			};
+		};
+
+		ethernet@6200 {
+			device_type = "network";
+			compatible = "tsi109-ethernet", "tsi108-ethernet";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00006000 0x00000200>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&MPIC>;
+			interrupts = <0x10 0x2>;
+			mdio-handle = <&MDIO>;
+			phy-handle = <&PHY1>;
+		};
+
+		ethernet@6600 {
+			device_type = "network";
+			compatible = "tsi109-ethernet", "tsi108-ethernet";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00006400 0x00000200>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&MPIC>;
+			interrupts = <0x11 0x2>;
+			mdio-handle = <&MDIO>;
+			phy-handle = <&PHY2>;
+		};
+
+		serial@7808 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x00007808 0x00000200>;
+			virtual-reg = <0xc0007808>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <0xc 0x2>;
+		};
+
+		serial@7c08 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x00007c08 0x00000200>;
+			virtual-reg = <0xc0007c08>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <0xd 0x2>;
+		};
+
+	  	MPIC: pic@7400 {
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x00007400 0x00000400>;
+			big-endian;
+		};
+	};
+
+	pci@c0001000 {
+		device_type = "pci";
+		compatible = "tsi109-pci", "tsi108-pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xc0001000 0x00001000>;
+		bus-range = <0x0 0x0>;
+		/*----------------------------------------------------+
+		| PCI memory range.
+		| 01 denotes I/O space
+		| 02 denotes 32-bit memory space
+		+----------------------------------------------------*/
+		ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+			  0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+		clock-frequency = <133333332>;
+		interrupt-parent = <&MPIC>;
+		interrupts = <0x17 0x2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		/*----------------------------------------------------+
+		| The INTA, INTB, INTC, INTD are shared.
+		+----------------------------------------------------*/
+		interrupt-map = <
+			0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+			0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+			0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+			0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+			0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+			0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+			0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+			0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+			0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+			0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+			0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+			0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+			0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+			0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+			0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+			0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
+			>;
+
+		RT0: router@1180 {
+			device_type = "pic-router";
+			interrupt-controller;
+			big-endian;
+			clock-frequency = <0>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			interrupts = <0x17 0x2>;
+			interrupt-parent = <&MPIC>;
+		};
+	};
+
+	chosen {
+		stdout-path = "/tsi109@c0000000/serial@7808";
+	};
+};
diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts
new file mode 100644
index 000000000..4fd7a4fbb
--- /dev/null
+++ b/arch/powerpc/boot/dts/icon.dts
@@ -0,0 +1,440 @@
+/*
+ * Device Tree Source for Mosaix Technologies, Inc. ICON board
+ *
+ * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "mosaixtech,icon";
+	compatible = "mosaixtech,icon";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440SPe";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440spe";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440spe";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/*        addr-child     addr-parent    size */
+		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
+			  0x4 0x00200000 0x4 0x00200000 0x00000400
+			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
+			  0xc 0x00000000 0xc 0x00000000 0x20000000
+			  0xd 0x00000000 0xd 0x00000000 0x80000000
+			  0xd 0x80000000 0xd 0x80000000 0x80000000
+			  0xe 0x00000000 0xe 0x00000000 0x80000000
+			  0xe 0x80000000 0xe 0x80000000 0x80000000
+			  0xf 0x00000000 0xf 0x00000000 0x80000000
+			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@f0000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@f0000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+
+			UART2: serial@f0000600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x5 0x4>;
+			};
+
+			IIC0: i2c@f0000400 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@f0000500 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+                                rtc@68 {
+                                        compatible = "st,m41t00";
+                                        reg = <0x68>;
+                                };
+			};
+
+			EMAC0: ethernet@f0000800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-440spe", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xf0000800 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "gmii";
+				phy-map = <0x00000000>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>;
+		};
+
+		PCIE0: pcie@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pcie@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x20 to 0x2f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		I2O: i2o@400100000 {
+			compatible = "ibm,i2o-440spe";
+			reg = <0x00000004 0x00100000 0x100>;
+			dcr-reg = <0x060 0x020>;
+		};
+
+		DMA0: dma0@400100100 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <0>;
+			reg = <0x00000004 0x00100100 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA0>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x14 4
+				1 &UIC1 0x16 4>;
+		};
+
+		DMA1: dma1@400100200 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <1>;
+			reg = <0x00000004 0x00100200 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA1>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x16 4
+				1 &UIC1 0x16 4>;
+		};
+
+		xor-accel@400200000 {
+			compatible = "amcc,xor-accelerator";
+			reg = <0x00000004 0x00200000 0x400>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x1f 4>;
+		};
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@f0000200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/iss4xx-mpic.dts b/arch/powerpc/boot/dts/iss4xx-mpic.dts
new file mode 100644
index 000000000..c9f90f1a9
--- /dev/null
+++ b/arch/powerpc/boot/dts/iss4xx-mpic.dts
@@ -0,0 +1,155 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *     Copyright (c) 2006, 2007 IBM Corp.
+ *     Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,iss-4xx";
+	compatible = "ibm,iss-4xx";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <0>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "okay";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <1>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00100>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <2>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00200>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <3>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg =  <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00030000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	plb {
+		compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; // Filled in by zImage
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			clock-frequency = <0>; // Filled in by zImage
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550a";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <0x0 0x2>;
+			};
+		};
+	};
+
+	nvrtc {
+		compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+		reg = <0 0xEF703000 0x2000>;
+	};
+	iss-block {
+		compatible = "ibm,iss-sim-block-device";
+		reg = <0 0xEF701000 0x1000>;
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@40000200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/iss4xx.dts b/arch/powerpc/boot/dts/iss4xx.dts
new file mode 100644
index 000000000..5533aff25
--- /dev/null
+++ b/arch/powerpc/boot/dts/iss4xx.dts
@@ -0,0 +1,116 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *    Copyright (c) 2006, 2007 IBM Corp.
+ *    Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,iss-4xx";
+	compatible = "ibm,iss-4xx";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <0x00000000>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>; // may need fixup in sim
+			d-cache-line-size = <32>; // may need fixup in sim
+			i-cache-size = <32768>; /* may need fixup in sim */
+			d-cache-size = <32768>; /* may need fixup in sim */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-4xx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-4xx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	plb {
+		compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; // Filled in by zImage
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			clock-frequency = <0>; // Filled in by zImage
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550a";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+		};
+	};
+
+	nvrtc {
+		compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+		reg = <0 0xEF703000 0x2000>;
+	};
+	iss-block {
+		compatible = "ibm,iss-sim-block-device";
+		reg = <0 0xEF701000 0x1000>;
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@40000200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
new file mode 100644
index 000000000..4262b2bbd
--- /dev/null
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -0,0 +1,492 @@
+/*
+ * Device Tree Source for AMCC Katmai eval board
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "amcc,katmai";
+	compatible = "amcc,katmai";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440SPe";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440spe";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440spe";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/*        addr-child     addr-parent    size */
+		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
+			  0x4 0x00200000 0x4 0x00200000 0x00000400
+			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
+			  0xc 0x00000000 0xc 0x00000000 0x20000000
+			  0xd 0x00000000 0xd 0x00000000 0x80000000
+			  0xd 0x80000000 0xd 0x80000000 0x80000000
+			  0xe 0x00000000 0xe 0x00000000 0x80000000
+			  0xe 0x80000000 0xe 0x80000000 0x80000000
+			  0xf 0x00000000 0xf 0x00000000 0x80000000
+			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@f0000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@f0000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+
+			UART2: serial@f0000600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x5 0x4>;
+			};
+
+			IIC0: i2c@f0000400 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@f0000500 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			EMAC0: ethernet@f0000800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-440spe", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xf0000800 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "gmii";
+				phy-map = <0x00000000>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/*
+			 * On Katmai, the following PCI-X interrupts signals
+			 * have to be enabled via jumpers (only INTA is
+			 * enabled per default):
+			 *
+			 * INTB: J3: 1-2
+			 * INTC: J2: 1-2
+			 * INTD: J1: 1-2
+			 */
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 1 */
+				0x800 0x0 0x0 0x1 &UIC1 0x14 0x8
+				0x800 0x0 0x0 0x2 &UIC1 0x13 0x8
+				0x800 0x0 0x0 0x3 &UIC1 0x12 0x8
+				0x800 0x0 0x0 0x4 &UIC1 0x11 0x8
+			>;
+		};
+
+		PCIE0: pcie@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pcie@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x20 to 0x2f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		PCIE2: pcie@d40000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x30 to 0x3f */
+			bus-range = <0x30 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
+		};
+
+		I2O: i2o@400100000 {
+			compatible = "ibm,i2o-440spe";
+			reg = <0x00000004 0x00100000 0x100>;
+			dcr-reg = <0x060 0x020>;
+		};
+
+		DMA0: dma0@400100100 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <0>;
+			reg = <0x00000004 0x00100100 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA0>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x14 4
+				1 &UIC1 0x16 4>;
+		};
+
+		DMA1: dma1@400100200 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <1>;
+			reg = <0x00000004 0x00100200 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA1>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x16 4
+				1 &UIC1 0x16 4>;
+		};
+
+		xor-accel@400200000 {
+			compatible = "amcc,xor-accelerator";
+			reg = <0x00000004 0x00200000 0x400>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x1f 4>;
+		};
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@f0000200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
new file mode 100644
index 000000000..154f5d293
--- /dev/null
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Keymile KMETER1 Device Tree Source
+ *
+ * 2008-2011 DENX Software Engineering GmbH
+ */
+
+/dts-v1/;
+
+/ {
+	model = "KMETER1";
+	compatible = "keymile,KMETER1";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet_piggy2;
+		ethernet1 = &enet_estar1;
+		ethernet2 = &enet_estar2;
+		ethernet3 = &enet_eth1;
+		ethernet4 = &enet_eth2;
+		ethernet5 = &enet_eth3;
+		ethernet6 = &enet_eth4;
+		serial0 = &serial0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8360@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <32768>;		// L1, 32K
+			i-cache-size = <32768>;		// L1, 32K
+			timebase-frequency = <0>;	/* Filled in by U-Boot */
+			bus-frequency = <0>;	/* Filled in by U-Boot */
+			clock-frequency = <0>;	/* Filled in by U-Boot */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;	/* Filled in by U-Boot */
+	};
+
+	soc8360@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8360-immr", "simple-bus";
+		ranges = <0x0 0xe0000000 0x00200000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;	/* Filled in by U-Boot */
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl,mpc8313-i2c","fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			clock-frequency = <400000>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <264000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		ipic: pic@700 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,pq2pro-pic", "fsl,ipic";
+			interrupt-controller;
+			reg = <0x700 0x100>;
+		};
+
+		par_io@1400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1400 0x100>;
+			compatible = "fsl,mpc8360-par_io";
+			num-ports = <7>;
+
+			qe_pio_c: gpio-controller@30 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8360-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0x1430 0x18>;
+				gpio-controller;
+			};
+			pio_ucc1: ucc_pin@0 {
+				reg = <0>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO   */
+					0   2  1  0  1  0	/* MDC    */
+
+					0   3  1  0  1  0	/* TxD0   */
+					0   4  1  0  1  0	/* TxD1   */
+					0   5  1  0  1  0	/* TxD2   */
+					0   6  1  0  1  0	/* TxD3   */
+					0   9  2  0  1  0	/* RxD0   */
+					0  10  2  0  1  0	/* RxD1   */
+					0  11  2  0  1  0	/* RxD2   */
+					0  12  2  0  1  0	/* RxD3   */
+					0   7  1  0  1  0	/* TX_EN  */
+					0   8  1  0  1  0	/* TX_ER  */
+					0  15  2  0  1  0	/* RX_DV  */
+					0  16  2  0  1  0	/* RX_ER  */
+					0   0  2  0  1  0	/* RX_CLK */
+					2   9  1  0  3  0	/* GTX_CLK - CLK10 */
+					2   8  2  0  1  0	/* GTX125  - CLK9  */
+				>;
+			};
+
+			pio_ucc2: ucc_pin@1 {
+				reg = <1>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO   */
+					0   2  1  0  1  0	/* MDC    */
+
+					0  17  1  0  1  0	/* TxD0   */
+					0  18  1  0  1  0	/* TxD1   */
+					0  19  1  0  1  0	/* TxD2   */
+					0  20  1  0  1  0	/* TxD3   */
+					0  23  2  0  1  0	/* RxD0   */
+					0  24  2  0  1  0	/* RxD1   */
+					0  25  2  0  1  0	/* RxD2   */
+					0  26  2  0  1  0	/* RxD3   */
+					0  21  1  0  1  0	/* TX_EN  */
+					0  22  1  0  1  0	/* TX_ER  */
+					0  29  2  0  1  0	/* RX_DV  */
+					0  30  2  0  1  0	/* RX_ER  */
+					0  31  2  0  1  0	/* RX_CLK */
+					2  2   1  0  2  0	/* GTX_CLK - CLK3  */
+					2  3   2  0  1  0	/* GTX125  - CLK4  */
+				>;
+			};
+
+			pio_ucc4: ucc_pin@3 {
+				reg = <3>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					1  14  1  0  1  0	/* TxD0   (PB14, out, f1) */
+					1  15  1  0  1  0	/* TxD1   (PB15, out, f1) */
+					1  20  2  0  1  0	/* RxD0   (PB20, in,  f1) */
+					1  21  2  0  1  0	/* RxD1   (PB21, in,  f1) */
+					1  18  1  0  1  0	/* TX_EN  (PB18, out, f1) */
+					1  26  2  0  1  0	/* RX_DV  (PB26, in,  f1) */
+					1  27  2  0  1  0	/* RX_ER  (PB27, in,  f1) */
+
+					2  16  2  0  1  0	/* UCC4_RMII_CLK (CLK17) */
+				>;
+			};
+
+			pio_ucc5: ucc_pin@4 {
+				reg = <4>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					3   0  1  0  1  0	/* TxD0  (PD0,  out, f1) */
+					3   1  1  0  1  0	/* TxD1  (PD1,  out, f1) */
+					3   6  2  0  1  0	/* RxD0  (PD6,   in, f1) */
+					3   7  2  0  1  0	/* RxD1  (PD7,   in, f1) */
+					3   4  1  0  1  0	/* TX_EN (PD4,  out, f1) */
+					3  12  2  0  1  0	/* RX_DV (PD12,  in, f1) */
+					3  13  2  0  1  0	/* RX_ER (PD13,  in, f1) */
+				>;
+			};
+
+			pio_ucc6: ucc_pin@5 {
+				reg = <5>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					3  14  1  0  1  0	/* TxD0   (PD14, out, f1) */
+					3  15  1  0  1  0	/* TxD1   (PD15, out, f1) */
+					3  20  2  0  1  0	/* RxD0   (PD20, in,  f1) */
+					3  21  2  0  1  0	/* RxD1   (PD21, in,  f1) */
+					3  18  1  0  1  0	/* TX_EN  (PD18, out, f1) */
+					3  26  2  0  1  0	/* RX_DV  (PD26, in,  f1) */
+					3  27  2  0  1  0	/* RX_ER  (PD27, in,  f1) */
+				>;
+			};
+
+			pio_ucc7: ucc_pin@6 {
+				reg = <6>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					4   0  1  0  1  0	/* TxD0   (PE0,  out, f1) */
+					4   1  1  0  1  0	/* TxD1   (PE1,  out, f1) */
+					4   6  2  0  1  0	/* RxD0   (PE6,   in, f1) */
+					4   7  2  0  1  0	/* RxD1   (PE7,   in, f1) */
+					4   4  1  0  1  0	/* TX_EN  (PE4,  out, f1) */
+					4  12  2  0  1  0	/* RX_DV  (PE12,  in, f1) */
+					4  13  2  0  1  0	/* RX_ER  (PE13,  in, f1) */
+				>;
+			};
+
+			pio_ucc8: ucc_pin@7 {
+				reg = <7>;
+
+				pio-map = <
+					/* port pin dir open_drain assignment has_irq */
+					0   1  3  0  2  0	/* MDIO */
+					0   2  1  0  1  0	/* MDC  */
+
+					4  14  1  0  2  0	/* TxD0   (PE14, out, f2) */
+					4  15  1  0  1  0	/* TxD1   (PE15, out, f1) */
+					4  20  2  0  1  0	/* RxD0   (PE20, in,  f1) */
+					4  21  2  0  1  0	/* RxD1   (PE21, in,  f1) */
+					4  18  1  0  1  0	/* TX_EN  (PE18, out, f1) */
+					4  26  2  0  1  0	/* RX_DV  (PE26, in,  f1) */
+					4  27  2  0  1  0	/* RX_ER  (PE27, in,  f1) */
+
+					2  15  2  0  1  0	/* UCCx_RMII_CLK (CLK16) */
+				>;
+			};
+
+		};
+
+		qe@100000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe";
+			ranges = <0x0 0x100000 0x100000>;
+			reg = <0x100000 0x480>;
+			clock-frequency = <0>;	/* Filled in by U-Boot */
+			brg-frequency = <0>;	/* Filled in by U-Boot */
+			bus-frequency = <0>;	/* Filled in by U-Boot */
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0x0 0x00010000 0x0000c000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+						     "fsl,cpm-muram-data";
+					reg = <0x0 0xc000>;
+				};
+			};
+
+			/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
+			enet_estar1: ucc@2000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk9";
+				phy-handle = <&phy_estar1>;
+				phy-connection-type = "rgmii-id";
+				pio-handle = <&pio_ucc1>;
+			};
+
+			/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
+			enet_estar2: ucc@3000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <2>;
+				reg = <0x3000 0x200>;
+				interrupts = <33>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk4";
+				phy-handle = <&phy_estar2>;
+				phy-connection-type = "rgmii-id";
+				pio-handle = <&pio_ucc2>;
+			};
+
+			/* Piggy2 (UCC4, MDIO 0x00, RMII) */
+			enet_piggy2: ucc@3200 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <4>;
+				reg = <0x3200 0x200>;
+				interrupts = <35>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk17";
+				phy-handle = <&phy_piggy2>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc4>;
+			};
+
+			/* Eth-1 (UCC5, MDIO 0x08, RMII) */
+			enet_eth1: ucc@2400 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <5>;
+				reg = <0x2400 0x200>;
+				interrupts = <40>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth1>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc5>;
+			};
+
+			/* Eth-2 (UCC6, MDIO 0x09, RMII) */
+			enet_eth2: ucc@3400 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <6>;
+				reg = <0x3400 0x200>;
+				interrupts = <41>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth2>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc6>;
+			};
+
+			/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
+			enet_eth3: ucc@2600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <7>;
+				reg = <0x2600 0x200>;
+				interrupts = <42>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth3>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc7>;
+			};
+
+			/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
+			enet_eth4: ucc@3600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <8>;
+				reg = <0x3600 0x200>;
+				interrupts = <43>;
+				interrupt-parent = <&qeic>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				rx-clock-name = "none";
+				tx-clock-name = "clk16";
+				phy-handle = <&phy_eth4>;
+				phy-connection-type = "rmii";
+				pio-handle = <&pio_ucc8>;
+			};
+
+			mdio@3320 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x3320 0x18>;
+				compatible = "fsl,ucc-mdio";
+
+				/* Piggy2 (UCC4, MDIO 0x00, RMII) */
+				phy_piggy2: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				/* Eth-1 (UCC5, MDIO 0x08, RMII) */
+				phy_eth1: ethernet-phy@8 {
+					reg = <0x08>;
+				};
+
+				/* Eth-2 (UCC6, MDIO 0x09, RMII) */
+				phy_eth2: ethernet-phy@9 {
+					reg = <0x09>;
+				};
+
+				/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
+				phy_eth3: ethernet-phy@a {
+					reg = <0x0a>;
+				};
+
+				/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
+				phy_eth4: ethernet-phy@b {
+					reg = <0x0b>;
+				};
+
+				/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
+				phy_estar1: ethernet-phy@10 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x10>;
+				};
+
+				/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
+				phy_estar2: ethernet-phy@11 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x11>;
+				};
+			};
+
+			qeic: interrupt-controller@80 {
+				interrupt-controller;
+				compatible = "fsl,qe-ic";
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				reg = <0x80 0x80>;
+				big-endian;
+				interrupts = <
+					32 0x8
+					33 0x8
+					34 0x8
+					35 0x8
+					40 0x8
+					41 0x8
+					42 0x8
+					43 0x8
+				>;
+				interrupt-parent = <&ipic>;
+			};
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xf0000000 0x04000000	/* LB 0 */
+			  1 0 0xe8000000 0x01000000	/* LB 1 */
+			  3 0 0xa0000000 0x10000000>;	/* LB 3 */
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x04000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			partition@0 { /* 768KB */
+				label = "u-boot";
+				reg = <0 0xC0000>;
+			};
+			partition@c0000 { /* 128KB */
+				label = "env";
+				reg = <0xC0000 0x20000>;
+			};
+			partition@e0000 { /* 128KB */
+				label = "envred";
+				reg = <0xE0000 0x20000>;
+			};
+			partition@100000 { /* 64512KB */
+				label = "ubi0";
+				reg = <0x100000 0x3F00000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
new file mode 100644
index 000000000..37a7eb576
--- /dev/null
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -0,0 +1,346 @@
+/*
+ * Device Tree Source for Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc8560ads.dts
+ *
+ * 2008 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e500v1_power_isa.dtsi"
+
+/ {
+	model = "KSI8560";
+	compatible = "emerson,KSI8560";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8560@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x8000>;		/* L1, 32K */
+			i-cache-size = <0x8000>;		/* L1, 32K */
+			timebase-frequency = <0>;		/* From U-boot */
+			bus-frequency = <0>;			/* From U-boot */
+			clock-frequency = <0>;			/* From U-boot */
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;			/* Fixed by bootwrapper */
+	};
+
+	soc@fdf00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x00000000 0xfdf00000 0x00100000>;
+		bus-frequency = <0>;				/* Fixed by bootwrapper */
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <0x12 0x2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <0x20>;		/* 32 bytes */
+			cache-size = <0x40000>;			/* L2, 256K */
+			interrupt-parent = <&mpic>;
+			interrupts = <0x10 0x2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <0x2b 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			/* Mac address filled in by bootwrapper */
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&PHY1>;
+
+			mdio@520 {					/* For TSECs */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				PHY1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					reg = <0x1>;
+				};
+
+				PHY2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					reg = <0x2>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			/* Mac address filled in by bootwrapper */
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&PHY2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		mpic: pic@40000 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x4000 0x9000 0x2000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8560-brg",
+					     "fsl,cpm2-brg",
+					     "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <165000000>;	/* 166MHz */
+			};
+
+			CPMPIC: pic@90c00 {
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupts = <0x2e 0x2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+			};
+
+			serial@91a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+					     "fsl,cpm2-scc-uart";
+				reg = <0x91a00 0x20 0x88000 0x100>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x800000>;
+				current-speed = <0x1c200>;
+				interrupts = <0x28 0x8>;
+				interrupt-parent = <&CPMPIC>;
+			};
+
+			serial@91a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+					     "fsl,cpm2-scc-uart";
+				reg = <0x91a20 0x20 0x88100 0x100>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x4a00000>;
+				current-speed = <0x1c200>;
+				interrupts = <0x29 0x8>;
+				interrupt-parent = <&CPMPIC>;
+			};
+
+			mdio@90d00 {				/* For FCCs */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,cpm2-mdio-bitbang";
+				reg = <0x90d00 0x14>;
+				fsl,mdio-pin = <24>;
+				fsl,mdc-pin = <25>;
+
+				PHY0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					reg = <0x0>;
+				};
+			};
+
+			enet2: ethernet@91300 {
+				device_type = "network";
+				compatible = "fsl,mpc8560-fcc-enet",
+					     "fsl,cpm2-fcc-enet";
+				reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>;
+				/* Mac address filled in by bootwrapper */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				fsl,cpm-command = <0x12000300>;
+				interrupts = <0x20 0x8>;
+				interrupt-parent = <&CPMPIC>;
+				phy-handle = <&PHY0>;
+			};
+		};
+	};
+
+	localbus@fdf05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8560-localbus", "simple-bus";
+		reg = <0xfdf05000 0x68>;
+
+		ranges = <0x0 0x0 0xe0000000 0x00800000
+			  0x4 0x0 0xe8080000 0x00080000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "jedec-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <0x2>;
+
+			partition@0 {
+				label = "Primary Kernel";
+				reg = <0x0 0x180000>;
+			};
+			partition@180000 {
+				label = "Primary Filesystem";
+				reg = <0x180000 0x580000>;
+			};
+			partition@700000 {
+				label = "Monitor";
+				reg = <0x300000 0x100000>;
+				read-only;
+			};
+		};
+
+		cpld@4,0 {
+			compatible = "emerson,KSI8560-cpld";
+			reg = <0x4 0x0 0x80000>;
+		};
+	};
+
+
+	chosen {
+		stdout-path = "/soc/cpm/serial@91a00";
+	};
+};
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
new file mode 100644
index 000000000..0a4545159
--- /dev/null
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -0,0 +1,147 @@
+/*
+ * Device Tree Souce for Buffalo KuroboxHD
+ *
+ * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use
+ * the default configuration linkstation_defconfig.
+ *
+ * Based on sandpoint.dts
+ *
+ * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+
+XXXX add flash parts, rtc, ??
+
+ */
+
+/dts-v1/;
+
+/ {
+	model = "KuroboxHD";
+	compatible = "linkstation";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,603e { /* Really 8241 */
+			device_type = "cpu";
+			reg = <0x0>;
+			clock-frequency = <200000000>;	/* Fixed by bootloader */
+			timebase-frequency = <24391680>; /* Fixed by bootloader */
+			bus-frequency = <0>;		/* Fixed by bootloader */
+			/* Following required by dtc but not used */
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "mpc10x";
+		store-gathering = <0>; /* 0 == off, !0 == on */
+		reg = <0x80000000 0x100000>;
+		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
+			  0xfc000000 0xfc000000 0x100000	/* EUMB */
+			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
+			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
+			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
+
+		i2c@80003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x80003000 0x1000>;
+			interrupts = <5 2>;
+			interrupt-parent = <&mpic>;
+
+			rtc@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+		};
+
+		serial0: serial@80004500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x80004500 0x8>;
+			clock-frequency = <97553800>;
+			current-speed = <9600>;
+			interrupts = <9 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@80004600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x80004600 0x8>;
+			clock-frequency = <97553800>;
+			current-speed = <57600>;
+			interrupts = <10 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: interrupt-controller@80040000 {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <0x80040000 0x40000>;
+		};
+
+		pci0: pci@fec00000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "mpc10x-pci";
+			reg = <0xfec00000 0x400000>;
+			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
+				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+			bus-range = <0 255>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&mpic>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 11 - IRQ0 ETH */
+				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
+				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
+				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
+				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
+				/* IDSEL 12 - IRQ1 IDE0 */
+				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
+				/* IDSEL 14 - IRQ3 USB2.0 */
+				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
new file mode 100644
index 000000000..0e758b347
--- /dev/null
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -0,0 +1,147 @@
+/*
+ * Device Tree Souce for Buffalo KuroboxHG
+ *
+ * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHG, or use
+ * the default configuration linkstation_defconfig.
+ *
+ * Based on sandpoint.dts
+ *
+ * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+
+XXXX add flash parts, rtc, ??
+
+ */
+
+/dts-v1/;
+
+/ {
+	model = "KuroboxHG";
+	compatible = "linkstation";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,603e { /* Really 8241 */
+			device_type = "cpu";
+			reg = <0x0>;
+			clock-frequency = <266000000>;	/* Fixed by bootloader */
+			timebase-frequency = <32522240>; /* Fixed by bootloader */
+			bus-frequency = <0>;		/* Fixed by bootloader */
+			/* Following required by dtc but not used */
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "mpc10x";
+		store-gathering = <0>; /* 0 == off, !0 == on */
+		reg = <0x80000000 0x100000>;
+		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
+			  0xfc000000 0xfc000000 0x100000	/* EUMB */
+			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
+			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
+			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
+
+		i2c@80003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x80003000 0x1000>;
+			interrupts = <5 2>;
+			interrupt-parent = <&mpic>;
+
+			rtc@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+		};
+
+		serial0: serial@80004500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x80004500 0x8>;
+			clock-frequency = <130041000>;
+			current-speed = <9600>;
+			interrupts = <9 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@80004600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x80004600 0x8>;
+			clock-frequency = <130041000>;
+			current-speed = <57600>;
+			interrupts = <10 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: interrupt-controller@80040000 {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <0x80040000 0x40000>;
+		};
+
+		pci0: pci@fec00000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "mpc10x-pci";
+			reg = <0xfec00000 0x400000>;
+			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
+				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+			bus-range = <0 255>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&mpic>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 11 - IRQ0 ETH */
+				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
+				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
+				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
+				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
+				/* IDSEL 12 - IRQ1 IDE0 */
+				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
+				/* IDSEL 14 - IRQ3 USB2.0 */
+				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
new file mode 100644
index 000000000..b9d848781
--- /dev/null
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Lite5200 board Device Tree Source
+ *
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,lite5200";
+	compatible = "fsl,lite5200";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		timer@610 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+		};
+
+		timer@620 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+		};
+
+		timer@630 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+		};
+
+		timer@640 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+		};
+
+		timer@650 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+		};
+
+		timer@660 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
+		};
+
+		timer@670 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
+		};
+
+		rtc@800 {	// Real time clock
+			compatible = "fsl,mpc5200-rtc";
+			reg = <0x800 0x100>;
+			interrupts = <1 5 0 1 6 0>;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio@b00 {
+			compatible = "fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio@c00 {
+			compatible = "fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi@f00 {
+			compatible = "fsl,mpc5200-spi";
+			reg = <0xf00 0x20>;
+			interrupts = <2 13 0 2 14 0>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 {		// PSC1
+			compatible = "fsl,mpc5200-psc-uart";
+			cell-index = <0>;
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		// PSC2 in ac97 mode example
+		//ac97@2200 {		// PSC2
+		//	compatible = "fsl,mpc5200-psc-ac97";
+		//	cell-index = <1>;
+		//	reg = <0x2200 0x100>;
+		//	interrupts = <2 2 0>;
+		//};
+
+		// PSC3 in CODEC mode example
+		//i2s@2400 {		// PSC3
+		//	compatible = "fsl,mpc5200-psc-i2s";
+		//	cell-index = <2>;
+		//	reg = <0x2400 0x100>;
+		//	interrupts = <2 3 0>;
+		//};
+
+		// PSC4 in uart mode example
+		//serial@2600 {		// PSC4
+		//	compatible = "fsl,mpc5200-psc-uart";
+		//	cell-index = <3>;
+		//	reg = <0x2600 0x100>;
+		//	interrupts = <2 11 0>;
+		//};
+
+		// PSC5 in uart mode example
+		//serial@2800 {		// PSC5
+		//	compatible = "fsl,mpc5200-psc-uart";
+		//	cell-index = <4>;
+		//	reg = <0x2800 0x100>;
+		//	interrupts = <2 12 0>;
+		//};
+
+		// PSC6 in spi mode example
+		//spi@2c00 {		// PSC6
+		//	compatible = "fsl,mpc5200-psc-spi";
+		//	cell-index = <5>;
+		//	reg = <0x2c00 0x100>;
+		//	interrupts = <2 4 0>;
+		//};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff000000 0x01000000>;
+
+		flash@0,0 {
+			compatible = "amd,am29lv652d", "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
new file mode 100644
index 000000000..7e2d91c7c
--- /dev/null
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Lite5200B board Device Tree Source
+ *
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
+/ {
+	model = "fsl,lite5200b";
+	compatible = "fsl,lite5200b";
+
+	leds {
+		compatible = "gpio-leds";
+		tmr2 {
+			gpios = <&gpt2 0 1>;
+		};
+		tmr3 {
+			gpios = <&gpt3 0 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		led1 { gpios = <&gpio_wkup 2 1>; };
+		led2 { gpios = <&gpio_simple 3 1>; };
+		led3 { gpios = <&gpio_wkup 3 1>; };
+		led4 { gpios = <&gpio_simple 2 1>; };
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x10000000>;	// 256MB
+	};
+
+	soc5200@f0000000 {
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			cell-index = <0>;
+		};
+
+		psc@2200 {		// PSC2
+			status = "disabled";
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {		// PSC5
+			status = "disabled";
+		};
+
+		psc@2c00 {		// PSC6
+			status = "disabled";
+		};
+
+		// PSC2 in ac97 mode example
+		//ac97@2200 {		// PSC2
+		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
+		//	cell-index = <1>;
+		//};
+
+		// PSC3 in CODEC mode example
+		//i2s@2400 {		// PSC3
+		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
+		//	cell-index = <2>;
+		//};
+
+		// PSC6 in spi mode example
+		//spi@2c00 {		// PSC6
+		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+		//	cell-index = <5>;
+		//};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		i2c@3d40 {
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+				 0xc000 0 0 2 &mpc5200_pic 1 1 3
+				 0xc000 0 0 3 &mpc5200_pic 1 2 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+				 0xc800 0 0 2 &mpc5200_pic 1 2 3
+				 0xc800 0 0 3 &mpc5200_pic 1 3 3
+				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	localbus {
+		ranges = <0 0 0xfe000000 0x02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <1>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "rootfs";
+				reg = <0x00200000 0x01d00000>;
+			};
+			partition@1f00000 {
+				label = "u-boot";
+				reg = <0x01f00000 0x00060000>;
+			};
+			partition@1f60000 {
+				label = "u-boot-env";
+				reg = <0x01f60000 0x00020000>;
+			};
+			partition@1f80000 {
+				label = "dtb";
+				reg = <0x01f80000 0x00080000>;
+			};
+		};
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
new file mode 100644
index 000000000..96524ede1
--- /dev/null
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Freescale Media5200 board Device Tree Source
+ *
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ * Steven Cavanagh <scavanagh@secretlab.ca>
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+
+/ {
+	model = "fsl,media5200";
+	compatible = "fsl,media5200";
+
+	aliases {
+		console = &console;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		stdout-path = &console;
+	};
+
+	cpus {
+		PowerPC,5200@0 {
+			timebase-frequency = <33000000>;	// 33 MHz, these were configured by U-Boot
+			bus-frequency = <132000000>;		// 132 MHz
+			clock-frequency = <396000000>;		// 396 MHz
+		};
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;	// 128MB RAM
+	};
+
+	soc5200@f0000000 {
+		bus-frequency = <132000000>;// 132 MHz
+
+		psc@2000 {	// PSC1
+			status = "disabled";
+		};
+
+		psc@2200 {	// PSC2
+			status = "disabled";
+		};
+
+		psc@2400 {	// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {	// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {	// PSC5
+			status = "disabled";
+		};
+
+		// PSC6 in uart mode
+		console: psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		usb@1000 {
+			reg = <0x1000 0x100>;
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
+				 0xc000 0 0 2 &media5200_fpga 0 3
+				 0xc000 0 0 3 &media5200_fpga 0 4
+				 0xc000 0 0 4 &media5200_fpga 0 5
+
+				 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
+				 0xc800 0 0 2 &media5200_fpga 0 4
+				 0xc800 0 0 3 &media5200_fpga 0 5
+				 0xc800 0 0 4 &media5200_fpga 0 2
+
+				 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
+				 0xd000 0 0 2 &media5200_fpga 0 5
+
+				 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
+				>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+		interrupt-parent = <&mpc5200_pic>;
+	};
+
+	localbus {
+		ranges = < 0 0 0xfc000000 0x02000000
+			   1 0 0xfe000000 0x02000000
+			   2 0 0xf0010000 0x00010000
+			   3 0 0xf0020000 0x00010000 >;
+		flash@0,0 {
+			compatible = "amd,am29lv28ml", "cfi-flash";
+			reg = <0 0x0 0x2000000>;                // 32 MB
+			bank-width = <4>;                       // Width in bytes of the flash bank
+			device-width = <2>;                     // Two devices on each bank
+		};
+
+		flash@1,0 {
+			compatible = "amd,am29lv28ml", "cfi-flash";
+			reg = <1 0 0x2000000>;                  // 32 MB
+			bank-width = <4>;                       // Width in bytes of the flash bank
+			device-width = <2>;                     // Two devices on each bank
+		};
+
+		media5200_fpga: fpga@2,0 {
+			compatible = "fsl,media5200-fpga";
+			interrupt-controller;
+			#interrupt-cells = <2>;	// 0:bank 1:id; no type field
+			reg = <2 0 0x10000>;
+
+			interrupt-parent = <&mpc5200_pic>;
+			interrupts = <0 0 3	// IRQ bank 0
+			              1 1 3>;	// IRQ bank 1
+		};
+
+		uart@3,0 {
+			compatible = "ti,tl16c752bpt";
+			reg = <3 0 0x10000>;
+			interrupt-parent = <&media5200_fpga>;
+			interrupts = <0 0  0 1>; // 2 irqs
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
new file mode 100644
index 000000000..9cefed207
--- /dev/null
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the MGCOGE plattform from keymile
+ *
+ * Copyright 2008 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ */
+
+/dts-v1/;
+/ {
+	model = "MGCOGE";
+	compatible = "keymile,km82xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &eth0;
+		serial0 = &smc2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8247@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			bus-frequency = <0>; /* Filled in by U-Boot */
+		};
+	};
+
+	localbus@f0010100 {
+		compatible = "fsl,mpc8247-localbus",
+		             "fsl,pq2-localbus",
+		             "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xf0010100 0x40>;
+
+		ranges = <0 0 0xfe000000 0x00400000
+			  1 0 0x30000000 0x00010000
+			  2 0 0x40000000 0x00010000
+			  5 0 0x50000000 0x04000000
+			>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000 0xC0000>;
+			};
+			partition@1 {
+				label = "env";
+				reg = <0xC0000 0x20000>;
+			};
+			partition@2 {
+				label = "envred";
+				reg = <0xE0000 0x20000>;
+			};
+			partition@3 {
+				label = "free";
+				reg = <0x100000 0x300000>;
+			};
+		};
+
+		flash@5,0 {
+			compatible = "cfi-flash";
+			reg = <5 0x00000000 0x02000000
+			       5 0x02000000 0x02000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			partition@app { /* 64 MBytes */
+				label = "ubi0";
+				reg = <0x00000000 0x04000000>;
+			};
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>; /* Filled in by U-Boot */
+	};
+
+	soc@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8247-immr", "fsl,pq2-soc", "simple-bus";
+		ranges = <0x00000000 0xf0000000 0x00053000>;
+
+		// Temporary until code stops depending on it.
+		device_type = "soc";
+
+		cpm@119c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,mpc8247-cpm", "fsl,cpm2",
+					"simple-bus";
+			reg = <0x119c0 0x30>;
+			ranges;
+
+			muram {
+				compatible = "fsl,cpm-muram";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x80 0x1f80 0x9800 0x800>;
+				};
+			};
+
+			brg@119f0 {
+				compatible = "fsl,mpc8247-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x119f0 0x10 0x115f0 0x10>;
+			};
+
+			/* Monitor port/SMC2 */
+			smc2: serial@11a90 {
+				device_type = "serial";
+				compatible = "fsl,mpc8247-smc-uart",
+				             "fsl,cpm2-smc-uart";
+				reg = <0x11a90 0x20 0x88fc 0x02>;
+				interrupts = <5 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x21200000>;
+				current-speed = <0>; /* Filled in by U-Boot */
+			};
+
+			eth0: ethernet@11a60 {
+				device_type = "network";
+				compatible = "fsl,mpc8247-scc-enet",
+				             "fsl,cpm2-scc-enet";
+				reg = <0x11a60 0x20 0x8300 0x100 0x11390 1>;
+				local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+				interrupts = <43 8>;
+				interrupt-parent = <&PIC>;
+				linux,network-index = <0>;
+				fsl,cpm-command = <0xce00000>;
+				fixed-link = <0 0 10 0 0>;
+			};
+
+			i2c@11860 {
+				compatible = "fsl,mpc8272-i2c",
+					     "fsl,cpm2-i2c";
+				reg = <0x11860 0x20 0x8afc 0x2>;
+				interrupts = <1 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-command = <0x29600000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@10d40 {
+				compatible = "fsl,cpm2-mdio-bitbang";
+				reg = <0x10d00 0x14>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fsl,mdio-pin = <12>;
+				fsl,mdc-pin = <13>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			/* FCC1 management to switch */
+			ethernet@11300 {
+				device_type = "network";
+				compatible = "fsl,cpm2-fcc-enet";
+				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
+				local-mac-address = [ 00 01 02 03 04 07 ];
+				interrupts = <32 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&phy0>;
+				linux,network-index = <1>;
+				fsl,cpm-command = <0x12000300>;
+			};
+
+			/* FCC2 to redundant core unit over backplane */
+			ethernet@11320 {
+				device_type = "network";
+				compatible = "fsl,cpm2-fcc-enet";
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+				local-mac-address = [ 00 01 02 03 04 08 ];
+				interrupts = <33 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&phy1>;
+				linux,network-index = <2>;
+				fsl,cpm-command = <0x16200300>;
+			};
+
+			usb@11b60 {
+				compatible = "fsl,mpc8272-cpm-usb";
+				mode = "peripheral";
+				reg = <0x11b60 0x40 0x8b00 0x100>;
+				interrupts = <11 8>;
+				interrupt-parent = <&PIC>;
+				usb-clock = <5>;
+			};
+			spi@11aa0 {
+				cell-index = <0>;
+				compatible = "fsl,spi", "fsl,cpm2-spi";
+				reg = <0x11a80 0x40 0x89fc 0x2>;
+				interrupts = <2 8>;
+				interrupt-parent = <&PIC>;
+				cs-gpios = < &cpm2_pio_d 19 0>;
+			};
+
+		};
+
+		cpm2_pio_d: gpio-controller@10d60 {
+			#gpio-cells = <2>;
+			compatible = "fsl,cpm2-pario-bank";
+			reg = <0x10d60 0x14>;
+			gpio-controller;
+		};
+
+		cpm2_pio_c: gpio-controller@10d40 {
+			#gpio-cells = <2>;
+			compatible = "fsl,cpm2-pario-bank";
+			reg = <0x10d40 0x14>;
+			gpio-controller;
+		};
+
+		PIC: interrupt-controller@10c00 {
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x10c00 0x80>;
+			compatible = "fsl,mpc8247-pic", "fsl,pq2-pic";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/microwatt.dts b/arch/powerpc/boot/dts/microwatt.dts
new file mode 100644
index 000000000..292b909ca
--- /dev/null
+++ b/arch/powerpc/boot/dts/microwatt.dts
@@ -0,0 +1,255 @@
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#size-cells = <0x02>;
+	#address-cells = <0x02>;
+	model = "microwatt";
+	compatible = "microwatt-soc";
+
+	aliases {
+		serial0 = &UART0;
+		ethernet = &enet0;
+	};
+
+	reserved-memory {
+		#size-cells = <0x02>;
+		#address-cells = <0x02>;
+		ranges;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x10000000>;
+	};
+
+	clocks {
+		sys_clk: litex_sys_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
+	};
+
+	cpus {
+		#size-cells = <0x00>;
+		#address-cells = <0x01>;
+
+		ibm,powerpc-cpu-features {
+			display-name = "Microwatt";
+			isa = <3100>;
+			device_type = "cpu-features";
+			compatible = "ibm,powerpc-cpu-features";
+
+			mmu-radix {
+				isa = <3000>;
+				usable-privilege = <6>;
+				os-support = <0>;
+			};
+
+			little-endian {
+				isa = <0>;
+				usable-privilege = <7>;
+				os-support = <0>;
+				hwcap-bit-nr = <1>;
+			};
+
+			cache-inhibited-large-page {
+				isa = <0>;
+				usable-privilege = <6>;
+				os-support = <0>;
+			};
+
+			fixed-point-v3 {
+				isa = <3000>;
+				usable-privilege = <7>;
+			};
+
+			no-execute {
+				isa = <0x00>;
+				usable-privilege = <2>;
+				os-support = <0>;
+			};
+
+			floating-point {
+				hfscr-bit-nr = <0>;
+				hwcap-bit-nr = <27>;
+				isa = <0>;
+				usable-privilege = <7>;
+				hv-support = <1>;
+				os-support = <0>;
+			};
+
+			prefixed-instructions {
+				hfscr-bit-nr = <13>;
+				fscr-bit-nr = <13>;
+				isa = <3010>;
+				usable-privilege = <7>;
+				os-support = <1>;
+				hv-support = <1>;
+			};
+
+			tar {
+				hfscr-bit-nr = <8>;
+				fscr-bit-nr = <8>;
+				isa = <2070>;
+				usable-privilege = <7>;
+				os-support = <1>;
+				hv-support = <1>;
+				hwcap-bit-nr = <58>;
+			};
+
+			control-register {
+				isa = <0>;
+				usable-privilege = <7>;
+			};
+
+			system-call-vectored {
+				isa = <3000>;
+				usable-privilege = <7>;
+				os-support = <1>;
+				fscr-bit-nr = <12>;
+				hwcap-bit-nr = <52>;
+			};
+		};
+
+		PowerPC,Microwatt@0 {
+			i-cache-sets = <2>;
+			ibm,dec-bits = <64>;
+			reservation-granule-size = <64>;
+			clock-frequency = <100000000>;
+			timebase-frequency = <100000000>;
+			i-tlb-sets = <1>;
+			ibm,ppc-interrupt-server#s = <0>;
+			i-cache-block-size = <64>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <2>;
+			i-tlb-size = <64>;
+			cpu-version = <0x990000>;
+			status = "okay";
+			i-cache-size = <0x1000>;
+			ibm,processor-radix-AP-encodings = <0x0c 0xa0000010 0x20000015 0x4000001e>;
+			tlb-size = <0>;
+			tlb-sets = <0>;
+			device_type = "cpu";
+			d-tlb-size = <128>;
+			d-tlb-sets = <2>;
+			reg = <0>;
+			general-purpose;
+			64-bit;
+			d-cache-size = <0x1000>;
+			ibm,chip-id = <0>;
+			ibm,mmu-lpid-bits = <12>;
+			ibm,mmu-pid-bits = <20>;
+		};
+
+		PowerPC,Microwatt@1 {
+			i-cache-sets = <2>;
+			ibm,dec-bits = <64>;
+			reservation-granule-size = <64>;
+			clock-frequency = <100000000>;
+			timebase-frequency = <100000000>;
+			i-tlb-sets = <1>;
+			ibm,ppc-interrupt-server#s = <1>;
+			i-cache-block-size = <64>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <2>;
+			i-tlb-size = <64>;
+			cpu-version = <0x990000>;
+			status = "okay";
+			i-cache-size = <0x1000>;
+			ibm,processor-radix-AP-encodings = <0x0c 0xa0000010 0x20000015 0x4000001e>;
+			tlb-size = <0>;
+			tlb-sets = <0>;
+			device_type = "cpu";
+			d-tlb-size = <128>;
+			d-tlb-sets = <2>;
+			reg = <1>;
+			general-purpose;
+			64-bit;
+			d-cache-size = <0x1000>;
+			ibm,chip-id = <0>;
+			ibm,mmu-lpid-bits = <12>;
+			ibm,mmu-pid-bits = <20>;
+		};
+	};
+
+	soc@c0000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&ICS>;
+
+		ranges = <0 0 0xc0000000 0x40000000>;
+
+		interrupt-controller@4000 {
+			compatible = "openpower,xics-presentation", "ibm,ppc-xicp";
+			ibm,interrupt-server-ranges = <0x0 0x2>;
+			reg = <0x4000 0x10 0x4010 0x10>;
+		};
+
+		ICS: interrupt-controller@5000 {
+			compatible = "openpower,xics-sources";
+			interrupt-controller;
+			interrupt-ranges = <0x10 0x10>;
+			reg = <0x5000 0x100>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			#interrupt-cells = <2>;
+		};
+
+		UART0: serial@2000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x2000 0x8>;
+			clock-frequency = <100000000>;
+			current-speed = <115200>;
+			reg-shift = <2>;
+			fifo-size = <16>;
+			interrupts = <0x10 0x1>;
+		};
+
+		gpio: gpio@7000 {
+			device_type = "gpio";
+			compatible = "faraday,ftgpio010";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x7000 0x80>;
+			interrupts = <0x14 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		enet0: ethernet@8020000 {
+			compatible = "litex,liteeth";
+			reg = <0x8021000 0x100
+				0x8020800 0x100
+				0x8030000 0x2000>;
+			reg-names = "mac", "mido", "buffer";
+			litex,rx-slots = <2>;
+			litex,tx-slots = <2>;
+			litex,slot-size = <0x800>;
+			interrupts = <0x11 0x1>;
+		};
+
+		mmc@8040000 {
+			compatible = "litex,mmc";
+			reg = <0x8042800 0x800
+				0x8041000 0x800
+				0x8040800 0x800
+				0x8042000 0x800
+				0x8041800 0x800>;
+			reg-names = "phy", "core", "reader", "writer", "irq";
+			bus-width = <4>;
+			interrupts = <0x13 1>;
+			clocks = <&sys_clk>;
+		};
+	};
+
+	chosen {
+		bootargs = "";
+		ibm,architecture-vec-5 = [19 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00
+					  00 00 00 00 00 00 00 00 40 00 40];
+		stdout-path = &UART0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
new file mode 100644
index 000000000..c23676093
--- /dev/null
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Motion-PRO board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt6 { // Motion-PRO status LED
+	compatible = "promess,motionpro-led";
+	label = "motionpro-statusled";
+	blink-delay = <100>; // 100 msec
+};
+&gpt7 { // Motion-PRO ready LED
+	compatible = "promess,motionpro-led";
+	label = "motionpro-readyled";
+};
+
+/ {
+	model = "promess,motionpro";
+	compatible = "promess,motionpro";
+
+	soc5200@f0000000 {
+		can@900 {
+			status = "disabled";
+		};
+
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		// PSC2 in spi master mode 
+		psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+			cell-index = <1>;
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2c00 {		// PSC6
+			status = "disabled";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@2 {
+				reg = <2>;
+			};
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		status = "disabled";
+	};
+
+	localbus {
+		ranges = <0 0 0xff000000 0x01000000
+			  1 0 0x50000000 0x00010000
+			  2 0 0x50010000 0x00010000
+			  3 0 0x50020000 0x00010000>;
+
+		// 8-bit DualPort SRAM on LocalPlus Bus CS1
+		kollmorgen@1,0 {
+			compatible = "promess,motionpro-kollmorgen";
+			reg = <1 0 0x10000>;
+			interrupts = <1 1 0>;
+		};
+
+		// 8-bit board CPLD on LocalPlus Bus CS2
+		cpld@2,0 {
+			compatible = "promess,motionpro-cpld";
+			reg = <2 0 0x10000>;
+		};
+
+		// 8-bit custom Anybus Module on LocalPlus Bus CS3
+		anybus@3,0 {
+			compatible = "promess,motionpro-anybus";
+			reg = <3 0 0x10000>;
+		};
+		pro_module_general@3,0 {
+			compatible = "promess,pro_module_general";
+			reg = <3 0 3>;
+		};
+		pro_module_dio@3,800 {
+			compatible = "promess,pro_module_dio";
+			reg = <3 0x800 2>;
+		};
+
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi
new file mode 100644
index 000000000..a278fb7b9
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5121.dtsi
@@ -0,0 +1,526 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * base MPC5121 Device Tree Source
+ *
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
+ */
+
+#include <dt-bindings/clock/mpc512x-clock.h>
+
+/dts-v1/;
+
+/ {
+	model = "mpc5121";
+	compatible = "fsl,mpc5121";
+	#address-cells = <1>;
+	#size-cells = <1>;
+        interrupt-parent = <&ipic>;
+
+	aliases {
+		ethernet0 = &eth0;
+		pci = &pci;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5121@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	/* 32 bytes */
+			i-cache-line-size = <0x20>;	/* 32 bytes */
+			d-cache-size = <0x8000>;	/* L1, 32K */
+			i-cache-size = <0x8000>;	/* L1, 32K */
+			timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */
+			bus-frequency = <198000000>;	/* 198 MHz csb bus */
+			clock-frequency = <396000000>;	/* 396 MHz ppc core */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	/* 256MB at 0 */
+	};
+
+	mbx@20000000 {
+		compatible = "fsl,mpc5121-mbx";
+		reg = <0x20000000 0x4000>;
+		interrupts = <66 0x8>;
+		clocks = <&clks MPC512x_CLK_MBX_BUS>,
+			 <&clks MPC512x_CLK_MBX_3D>,
+			 <&clks MPC512x_CLK_MBX>;
+		clock-names = "mbx-bus", "mbx-3d", "mbx";
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x20000>;	/* 128K at 0x30000000 */
+	};
+
+	nfc@40000000 {
+		compatible = "fsl,mpc5121-nfc";
+		reg = <0x40000000 0x100000>;	/* 1M at 0x40000000 */
+		interrupts = <6 8>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&clks MPC512x_CLK_NFC>;
+		clock-names = "ipg";
+	};
+
+	localbus@80000020 {
+		compatible = "fsl,mpc5121-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x80000020 0x40>;
+		ranges = <0x0 0x0 0xfc000000 0x04000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <33000000>;
+		};
+	};
+
+	soc@80000000 {
+		compatible = "fsl,mpc5121-immr";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x80000000 0x400000>;
+		reg = <0x80000000 0x400000>;
+		bus-frequency = <66000000>;	/* 66 MHz ips bus */
+
+
+		/*
+		 * IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@c00 {
+			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0xc00 0x100>;
+		};
+
+		/* Watchdog timer */
+		watchdog@900 {
+			compatible = "fsl,mpc5121-wdt";
+			reg = <0x900 0x100>;
+		};
+
+		/* Real time clock */
+		rtc@a00 {
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+		};
+
+		/* Reset module */
+		reset@e00 {
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
+		/* Clock control */
+		clks: clock@f00 {
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+			#clock-cells = <1>;
+			clocks = <&osc>;
+			clock-names = "osc";
+		};
+
+		/* Power Management Controller */
+		pmc@1000 {
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x8>;
+		};
+
+		gpio@1100 {
+			compatible = "fsl,mpc5121-gpio";
+			reg = <0x1100 0x100>;
+			interrupts = <78 0x8>;
+		};
+
+		can@1300 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x1300 0x80>;
+			interrupts = <12 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		can@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x1380 0x80>;
+			interrupts = <13 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		sdhc@1500 {
+			compatible = "fsl,mpc5121-sdhc";
+			reg = <0x1500 0x100>;
+			interrupts = <8 0x8>;
+			dmas = <&dma0 30>;
+			dma-names = "rx-tx";
+			clocks = <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SDHC>;
+			clock-names = "ipg", "per";
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1700 0x20>;
+			interrupts = <9 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1720 0x20>;
+			interrupts = <10 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1740 0x20>;
+			interrupts = <11 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		axe@2000 {
+			compatible = "fsl,mpc5121-axe";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+			clocks = <&clks MPC512x_CLK_AXE>;
+			clock-names = "ipg";
+		};
+
+		display@2100 {
+			compatible = "fsl,mpc5121-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+			clocks = <&clks MPC512x_CLK_DIU>;
+			clock-names = "ipg";
+		};
+
+		can@2300 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x2300 0x80>;
+			interrupts = <90 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN2_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		can@2380 {
+			compatible = "fsl,mpc5121-mscan";
+			reg = <0x2380 0x80>;
+			interrupts = <91 0x8>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN3_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		viu@2400 {
+			compatible = "fsl,mpc5121-viu";
+			reg = <0x2400 0x400>;
+			interrupts = <67 0x8>;
+			clocks = <&clks MPC512x_CLK_VIU>;
+			clock-names = "ipg";
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
+		};
+
+		eth0: ethernet@2800 {
+			device_type = "network";
+			compatible = "fsl,mpc5121-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
+		};
+
+		/* USB1 using external ULPI PHY */
+		usb@3000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x3000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <43 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+			clocks = <&clks MPC512x_CLK_USB1>;
+			clock-names = "ipg";
+		};
+
+		/* USB0 using internal UTMI PHY */
+		usb@4000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x4000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <44 0x8>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+			clocks = <&clks MPC512x_CLK_USB2>;
+			clock-names = "ipg";
+		};
+
+		/* IO control */
+		ioctl@a000 {
+			compatible = "fsl,mpc5121-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		/* LocalPlus controller */
+		lpc@10000 {
+			compatible = "fsl,mpc5121-lpc";
+			reg = <0x10000 0x100>;
+		};
+
+		sclpc@10100 {
+			compatible = "fsl,mpc512x-lpbfifo";
+			reg = <0x10100 0x50>;
+			interrupts = <7 0x8>;
+			dmas = <&dma0 26>;
+			dma-names = "rx-tx";
+		};
+
+		pata@10200 {
+			compatible = "fsl,mpc5121-pata";
+			reg = <0x10200 0x100>;
+			interrupts = <5 0x8>;
+			clocks = <&clks MPC512x_CLK_PATA>;
+			clock-names = "ipg";
+		};
+
+		/* 512x PSCs are not 52xx PSC compatible */
+
+		/* PSC0 */
+		psc@11000 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11000 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC0>,
+				 <&clks MPC512x_CLK_PSC0_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC1 */
+		psc@11100 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11100 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC1>,
+				 <&clks MPC512x_CLK_PSC1_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC2 */
+		psc@11200 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11200 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC2>,
+				 <&clks MPC512x_CLK_PSC2_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC3 */
+		psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			reg = <0x11300 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC3>,
+				 <&clks MPC512x_CLK_PSC3_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC4 */
+		psc@11400 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			reg = <0x11400 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC4>,
+				 <&clks MPC512x_CLK_PSC4_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC5 */
+		psc@11500 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11500 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC5>,
+				 <&clks MPC512x_CLK_PSC5_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC6 */
+		psc@11600 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11600 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC6>,
+				 <&clks MPC512x_CLK_PSC6_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC7 */
+		psc@11700 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11700 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC7>,
+				 <&clks MPC512x_CLK_PSC7_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC8 */
+		psc@11800 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11800 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC8>,
+				 <&clks MPC512x_CLK_PSC8_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC9 */
+		psc@11900 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11900 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC9>,
+				 <&clks MPC512x_CLK_PSC9_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC10 */
+		psc@11a00 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11a00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC10>,
+				 <&clks MPC512x_CLK_PSC10_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		/* PSC11 */
+		psc@11b00 {
+			compatible = "fsl,mpc5121-psc";
+			reg = <0x11b00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC11>,
+				 <&clks MPC512x_CLK_PSC11_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		pscfifo@11f00 {
+			compatible = "fsl,mpc5121-psc-fifo";
+			reg = <0x11f00 0x100>;
+			interrupts = <40 0x8>;
+			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+			clock-names = "ipg";
+		};
+
+		dma0: dma@14000 {
+			compatible = "fsl,mpc5121-dma";
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+			#dma-cells = <1>;
+		};
+	};
+
+	pci: pci@80008500 {
+		compatible = "fsl,mpc5121-pci";
+		device_type = "pci";
+		interrupts = <1 0x8>;
+		clock-frequency = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		clocks = <&clks MPC512x_CLK_PCI>;
+		clock-names = "ipg";
+
+		reg = <0x80008500 0x100	/* internal registers */
+		       0x80008300 0x8>;	/* config space access registers */
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
new file mode 100644
index 000000000..b407a50ee
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC5121E ADS Device Tree Source
+ *
+ * Copyright 2007-2008 Freescale Semiconductor Inc.
+ */
+
+#include "mpc5121.dtsi"
+
+/ {
+	model = "mpc5121ads";
+	compatible = "fsl,mpc5121ads", "fsl,mpc5121";
+
+	nfc@40000000 {
+		/*
+		 * ADS has two Hynix 512MB Nand flash chips in a single
+		 * stacked package.
+		 */
+		chips = <2>;
+
+		nand@0 {
+			label = "nand";
+			reg = <0x00000000 0x40000000>;	/* 512MB + 512MB */
+		};
+	};
+
+	localbus@80000020 {
+		ranges = <0x0 0x0 0xfc000000 0x04000000
+			  0x2 0x0 0x82000000 0x00008000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <4>;
+			device-width = <2>;
+
+			protected@0 {
+				label = "protected";
+				reg = <0x00000000 0x00040000>;  // first sector is protected
+				read-only;
+			};
+			filesystem@40000 {
+				label = "filesystem";
+				reg = <0x00040000 0x03c00000>;  // 60M for filesystem
+			};
+			kernel@3c40000 {
+				label = "kernel";
+				reg = <0x03c40000 0x00280000>;  // 2.5M for kernel
+			};
+			device-tree@3ec0000 {
+				label = "device-tree";
+				reg = <0x03ec0000 0x00040000>;  // one sector for device tree
+			};
+			u-boot@3f00000 {
+				label = "u-boot";
+				reg = <0x03f00000 0x00100000>;  // 1M for u-boot
+				read-only;
+			};
+		};
+
+		board-control@2,0 {
+			compatible = "fsl,mpc5121ads-cpld";
+			reg = <0x2 0x0 0x8000>;
+		};
+
+		cpld_pic: pic@2,a {
+			compatible = "fsl,mpc5121ads-cpld-pic";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x2 0xa 0x5>;
+			/* irq routing:
+			 * all irqs but touch screen are routed to irq0 (ipic 48)
+			 * touch screen is statically routed to irq1 (ipic 17)
+			 * so don't use it here
+			 */
+			interrupts = <48 0x8>;
+		};
+	};
+
+	soc@80000000 {
+
+		i2c@1700 {
+			fsl,preserve-clocking;
+
+			hwmon@4a {
+				compatible = "adi,ad7414";
+				reg = <0x4a>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t62";
+				reg = <0x68>;
+			};
+		};
+
+		eth0: ethernet@2800 {
+			phy-handle = <&phy0>;
+		};
+
+		can@2300 {
+			status = "disabled";
+		};
+
+		can@2380 {
+			status = "disabled";
+		};
+
+		viu@2400 {
+			status = "disabled";
+		};
+
+		mdio@2800 {
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+		};
+
+		/* mpc5121ads only uses USB0 */
+		usb@3000 {
+			status = "disabled";
+		};
+
+		/* USB0 using internal UTMI PHY */
+		usb@4000 {
+			dr_mode = "host";
+			fsl,invert-drvvbus;
+			fsl,invert-pwr-fault;
+		};
+
+		/* PSC3 serial port A aka ttyPSC0 */
+		psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		/* PSC4 serial port B aka ttyPSC1 */
+		psc@11400 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		/* PSC5 in ac97 mode */
+		ac97: psc@11500 {
+			compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
+			fsl,mode = "ac97-slave";
+			fsl,rx-fifo-size = <384>;
+			fsl,tx-fifo-size = <384>;
+		};
+	};
+
+	pci: pci@80008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x15 - Slot 1 PCI */
+				 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
+				 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
+				 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
+				 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
+
+				/* IDSEL 0x16 - Slot 2 MiniPCI */
+				 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
+				 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
+
+				/* IDSEL 0x17 - Slot 3 MiniPCI */
+				 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
+				 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
+				>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts
new file mode 100644
index 000000000..ee090709a
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5125twr.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * STx/Freescale ADS5125 MPC5125 silicon
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
+ *
+ * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
+ * Copyright (C) 2013 Sirius Electronic Systems
+ */
+
+#include <dt-bindings/clock/mpc512x-clock.h>
+
+/dts-v1/;
+
+/ {
+	model = "mpc5125twr"; // In BSP "mpc5125ads"
+	compatible = "fsl,mpc5125ads", "fsl,mpc5125";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&ipic>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		ethernet0 = &eth0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5125@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	// 32 bytes
+			i-cache-line-size = <0x20>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
+			bus-frequency = <198000000>;	// 198 MHz csb bus
+			clock-frequency = <396000000>;	// 396 MHz ppc core
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x08000>;		// 32K at 0x30000000
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <33000000>;
+		};
+	};
+
+	soc@80000000 {
+		compatible = "fsl,mpc5121-immr";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x80000000 0x400000>;
+		reg = <0x80000000 0x400000>;
+		bus-frequency = <66000000>;	// 66 MHz ips bus
+
+		// IPIC
+		// interrupts cell = <intr #, sense>
+		// sense values match linux IORESOURCE_IRQ_* defines:
+		// sense == 8: Level, low assertion
+		// sense == 2: Edge, high-to-low change
+		//
+		ipic: interrupt-controller@c00 {
+			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0xc00 0x100>;
+		};
+
+		rtc@a00 {	// Real time clock
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+		};
+
+		reset@e00 {	// Reset module
+			compatible = "fsl,mpc5125-reset";
+			reg = <0xe00 0x100>;
+		};
+
+		clks: clock@f00 {	// Clock control
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+			#clock-cells = <1>;
+			clocks = <&osc>;
+			clock-names = "osc";
+		};
+
+		pmc@1000 {  // Power Management Controller
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x2>;
+		};
+
+		gpio0: gpio@1100 {
+			compatible = "fsl,mpc5125-gpio";
+			reg = <0x1100 0x080>;
+			interrupts = <78 0x8>;
+		};
+
+		gpio1: gpio@1180 {
+			compatible = "fsl,mpc5125-gpio";
+			reg = <0x1180 0x080>;
+			interrupts = <86 0x8>;
+		};
+
+		can@1300 { // CAN rev.2
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <12 0x8>;
+			reg = <0x1300 0x80>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		can@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <13 0x8>;
+			reg = <0x1380 0x80>;
+			clocks = <&clks MPC512x_CLK_BDLC>,
+				 <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SYS>,
+				 <&clks MPC512x_CLK_REF>,
+				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
+			clock-names = "ipg", "ips", "sys", "ref", "mclk";
+		};
+
+		sdhc@1500 {
+			compatible = "fsl,mpc5121-sdhc";
+			interrupts = <8 0x8>;
+			reg = <0x1500 0x100>;
+			clocks = <&clks MPC512x_CLK_IPS>,
+				 <&clks MPC512x_CLK_SDHC>;
+			clock-names = "ipg", "per";
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1700 0x20>;
+			interrupts = <0x9 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1720 0x20>;
+			interrupts = <0xa 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			reg = <0x1740 0x20>;
+			interrupts = <0xb 0x8>;
+			clocks = <&clks MPC512x_CLK_I2C>;
+			clock-names = "ipg";
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		diu@2100 {
+			compatible = "fsl,mpc5121-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+			clocks = <&clks MPC512x_CLK_DIU>;
+			clock-names = "ipg";
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+		};
+
+		eth0: ethernet@2800 {
+			compatible = "fsl,mpc5125-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			phy-handle = < &phy0 >;
+			phy-connection-type = "rmii";
+			clocks = <&clks MPC512x_CLK_FEC>;
+			clock-names = "per";
+		};
+
+		// IO control
+		ioctl@a000 {
+			compatible = "fsl,mpc5125-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		// disable USB1 port
+		// TODO:
+		// correct pinmux config and fix USB3320 ulpi dependency
+		// before re-enabling it
+		usb@3000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x3000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <43 0x8>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+			clocks = <&clks MPC512x_CLK_USB1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		sclpc@10100 {
+			compatible = "fsl,mpc512x-lpbfifo";
+			reg = <0x10100 0x50>;
+			interrupts = <7 0x8>;
+			dmas = <&dma0 26>;
+			dma-names = "rx-tx";
+		};
+
+		// 5125 PSCs are not 52xx or 5121 PSC compatible
+		// PSC1 uart0 aka ttyPSC0
+		serial@11100 {
+			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+			reg = <0x11100 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC1>,
+				 <&clks MPC512x_CLK_PSC1_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		// PSC9 uart1 aka ttyPSC1
+		serial@11900 {
+			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+			reg = <0x11900 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+			clocks = <&clks MPC512x_CLK_PSC9>,
+				 <&clks MPC512x_CLK_PSC9_MCLK>;
+			clock-names = "ipg", "mclk";
+		};
+
+		pscfifo@11f00 {
+			compatible = "fsl,mpc5121-psc-fifo";
+			reg = <0x11f00 0x100>;
+			interrupts = <40 0x8>;
+			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
+			clock-names = "ipg";
+		};
+
+		dma0: dma@14000 {
+			compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+			#dma-cells = <1>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
new file mode 100644
index 000000000..ffa82c7e1
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * base MPC5200b Device Tree Source
+ *
+ * Copyright (C) 2010 SecretLab
+ * Grant Likely <grant@secretlab.ca>
+ * John Bonesio <bones@secretlab.ca>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc5200b";
+	compatible = "fsl,mpc5200b";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		powerpc: PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory: memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc: soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		gpt0: timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			// add 'fsl,has-wdt' to enable watchdog
+		};
+
+		gpt1: timer@610 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+		};
+
+		gpt2: timer@620 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+		};
+
+		gpt3: timer@630 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+		};
+
+		gpt4: timer@640 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+		};
+
+		gpt5: timer@650 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+		};
+
+		gpt6: timer@660 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
+		};
+
+		gpt7: timer@670 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
+		};
+
+		rtc@800 {	// Real time clock
+			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
+			reg = <0x800 0x100>;
+			interrupts = <1 5 0 1 6 0>;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi@f00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+			reg = <0xf00 0x20>;
+			interrupts = <2 13 0 2 14 0>;
+		};
+
+		usb: usb@1000 {
+			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		psc1: psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc2: psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc3: psc@2400 {		// PSC3
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc4: psc@2600 {		// PSC4
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2600 0x100>;
+			interrupts = <2 11 0>;
+		};
+
+		psc5: psc@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2800 0x100>;
+			interrupts = <2 12 0>;
+		};
+
+		psc6: psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		eth0: ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		sclpc@3c00 {
+			compatible = "fsl,mpc5200-lpbfifo";
+			reg = <0x3c00 0x60>;
+			interrupts = <2 23 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci: pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		// interrupt-map-mask = need to add
+		// interrupt-map = need to add
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+
+	localbus: localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x2000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts
new file mode 100644
index 000000000..5af945e17
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * mpc8308_p1m Device Tree Source
+ *
+ * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "denx,mpc8308_p1m";
+	model = "denx,mpc8308_p1m";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8308@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		ranges = <0x0 0x0 0xfc000000 0x04000000
+		          0x1 0x0 0xfbff0000 0x00008000
+		          0x2 0x0 0xfbff8000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x60000>;
+				read-only;
+			};
+			env@60000 {
+				reg = <0x60000 0x20000>;
+			};
+			env1@80000 {
+				reg = <0x80000 0x20000>;
+			};
+			kernel@a0000 {
+				reg = <0xa0000 0x200000>;
+			};
+			dtb@2a0000 {
+				reg = <0x2a0000 0x20000>;
+			};
+			ramdisk@2c0000 {
+				reg = <0x2c0000 0x640000>;
+			};
+			user@700000 {
+				reg = <0x700000 0x3900000>;
+			};
+		};
+
+		can@1,0 {
+			compatible = "nxp,sja1000";
+			reg = <0x1 0x0 0x80>;
+			interrupts = <18 0x8>;
+			interrups-parent = <&ipic>;
+		};
+
+		cpld@2,0 {
+			compatible = "denx,mpc8308_p1m-cpld";
+			reg = <0x2 0x0 0x8>;
+			interrupts = <48 0x8>;
+			interrups-parent = <&ipic>;
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8308-immr", "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			fram@50 {
+				compatible = "ramtron,24c64", "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			pwm@28 {
+				compatible = "maxim,ds1050";
+				reg = <0x28>;
+			};
+			sensor@48 {
+				compatible = "maxim,max6625";
+				reg = <0x48>;
+			};
+			sensor@49 {
+				compatible = "maxim,max6625";
+				reg = <0x49>;
+			};
+			sensor@4b {
+				compatible = "maxim,max6625";
+				reg = <0x4b>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = < &phy1 >;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <19 0x8>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = < &phy2 >;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		gpio@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x18>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		timer@500 {
+			compatible = "fsl,mpc8308-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 8 78 8 84 8 72 8>;
+			interrupt-parent = <&ipic>;
+			clock-frequency = <133333333>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0x0 0x100>;
+			interrupts = < 0x43 0x8
+					0x4  0x8
+					0x51 0x8
+					0x52 0x8
+					0x56 0x8
+					0x57 0x8
+					0x58 0x8
+					0x59 0x8 >;
+			interrupt-parent = < &ipic >;
+		};
+
+		dma@2c000 {
+			compatible = "fsl,mpc8308-dma";
+			reg = <0x2c000 0x1800>;
+			interrupts = <3 0x8
+					94 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+	};
+
+	pci0: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000
+			0xb0000000 0x01000000>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+		bus-range = <0 0>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &ipic 1 8>;
+		interrupts = <0x1 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts
new file mode 100644
index 000000000..7b6fd58ff
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8308rdb.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8308RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8308rdb";
+	model = "fsl,mpc8308rdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8308@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00002000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x60000>;
+				read-only;
+			};
+			env@60000 {
+				reg = <0x60000 0x10000>;
+			};
+			env1@70000 {
+				reg = <0x70000 0x10000>;
+			};
+			kernel@80000 {
+				reg = <0x80000 0x200000>;
+			};
+			dtb@280000 {
+				reg = <0x280000 0x10000>;
+			};
+			ramdisk@290000 {
+				reg = <0x290000 0x570000>;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x2000>;
+
+			jffs2@0 {
+				reg = <0x0 0x2000000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8308-immr", "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi0 >;
+			phy-handle = < &phy2 >;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi1 >;
+			/* Vitesse 7385 isn't on the MDIO bus */
+			fixed-link = <1 1 1000 0 0>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		gpio@c00 {
+			#gpio-cells = <2>;
+			device_type = "gpio";
+			compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x18>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0x0 0x100>;
+			interrupts = < 0x43 0x8
+					0x4  0x8
+					0x51 0x8
+					0x52 0x8
+					0x56 0x8
+					0x57 0x8
+					0x58 0x8
+					0x59 0x8 >;
+			interrupt-parent = < &ipic >;
+		};
+
+		dma@2c000 {
+			compatible = "fsl,mpc8308-dma";
+			reg = <0x2c000 0x1800>;
+			interrupts = <3 0x8
+					94 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+	};
+
+	pci0: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000
+			0xb0000000 0x01000000>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+		bus-range = <0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		interrupts = <0x1 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
new file mode 100644
index 000000000..c9fe4dabc
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8313E RDB Device Tree Source
+ *
+ * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "MPC8313ERDB";
+	compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8313@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe2800000 0x00008000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x2000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	soc8313@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		watchdog@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x03000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			crypto@30000 {
+				compatible = "fsl,sec2.2", "fsl,sec2.1",
+				             "fsl,sec2.0";
+				reg = <0x30000 0x10000>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&ipic>;
+				fsl,num-channels = <1>;
+				fsl,channel-fifo-len = <24>;
+				fsl,exec-units-mask = <0x4c>;
+				fsl,descriptor-types-mask = <0x0122003f>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+			phy_type = "utmi_wide";
+			sleep = <&pmc 0x00300000>;
+		};
+
+		ptp_clock@24E00 {
+			compatible = "fsl,etsec-ptp";
+			reg = <0x24E00 0xB0>;
+			interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
+				     <13 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = < &ipic >;
+			fsl,tclk-period = <10>;
+			fsl,tmr-prsc    = <100>;
+			fsl,tmr-add     = <0x999999A4>;
+			fsl,tmr-fiper1  = <0x3B9AC9F6>;
+			fsl,tmr-fiper2  = <0x00018696>;
+			fsl,max-adj     = <659999998>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			sleep = <&pmc 0x20000000>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 IRQ_TYPE_LEVEL_LOW>,
+				     <36 IRQ_TYPE_LEVEL_LOW>,
+				     <35 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi0 >;
+			/* Vitesse 7385 isn't on the MDIO bus */
+			fixed-link = <1 1 1000 0 0>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&ipic>;
+					interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <34 IRQ_TYPE_LEVEL_LOW>,
+				     <33 IRQ_TYPE_LEVEL_LOW>,
+				     <32 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi1 >;
+			phy-handle = < &phy4 >;
+			sleep = <&pmc 0x10000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+
+
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, type>
+		 */
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			fsl,mpc8313-wakeup-timer = <&gtm1>;
+
+			/* Remove this (or change to "okay") if you have
+			 * a REVA3 or later board, if you apply one of the
+			 * workarounds listed in section 8.5 of the board
+			 * manual, or if you are adapting this device tree
+			 * to a different board.
+			 */
+			status = "fail";
+		};
+
+		gtm1: timer@500 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 IRQ_TYPE_LEVEL_LOW>,
+				     <78 IRQ_TYPE_LEVEL_LOW>,
+				     <84 IRQ_TYPE_LEVEL_LOW>,
+				     <72 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x600 0x100>;
+			interrupts = <91 IRQ_TYPE_LEVEL_LOW>,
+				     <79 IRQ_TYPE_LEVEL_LOW>,
+				     <85 IRQ_TYPE_LEVEL_LOW>,
+				     <73 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00010000>;
+		ranges;
+
+		pci0: pci@e0008500 {
+			cell-index = <1>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+					/* IDSEL 0x0E -mini PCI */
+					 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+					/* IDSEL 0x0F - PCI slot */
+					 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <66 IRQ_TYPE_LEVEL_LOW>;
+			bus-range = <0x0 0x0>;
+			ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+				  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+				  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+			clock-frequency = <66666666>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <0xe0008500 0x100		/* internal registers */
+			       0xe0008300 0x8>;		/* config space access registers */
+			compatible = "fsl,mpc8349-pci";
+			device_type = "pci";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+			reg = <0xe00082a8 4>;
+			ranges = <0 0xe0008100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+
+			dma-channel@0 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+				cell-index = <0>;
+			};
+
+			dma-channel@80 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x80 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+				cell-index = <1>;
+			};
+
+			dma-channel@100 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x100 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+				cell-index = <2>;
+			};
+
+			dma-channel@180 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+				cell-index = <3>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
new file mode 100644
index 000000000..4757f0d24
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8315E RDB Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "fsl,mpc8315erdb";
+	model = "MPC8315E-RDB";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8315@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00002000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x2000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8315-immr", "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		watchdog@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8315erdb",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+			phy_type = "utmi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 IRQ_TYPE_LEVEL_LOW>,
+				     <33 IRQ_TYPE_LEVEL_LOW>,
+				     <34 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = < &phy0 >;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&ipic>;
+					interrupts = <20 0x8>;
+					reg = <0x0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&ipic>;
+					interrupts = <19 0x8>;
+					reg = <0x1>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 IRQ_TYPE_LEVEL_LOW>,
+				     <36 IRQ_TYPE_LEVEL_LOW>,
+				     <37 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = < &phy1 >;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+				     "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			cell-index = <1>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			cell-index = <2>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+		};
+
+		gtm1: timer@500 {
+			compatible = "fsl,mpc8315-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 IRQ_TYPE_LEVEL_LOW>,
+				     <78 IRQ_TYPE_LEVEL_LOW>,
+				     <84 IRQ_TYPE_LEVEL_LOW>,
+				     <72 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			clock-frequency = <133333333>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc8315-gtm", "fsl,gtm";
+			reg = <0x600 0x100>;
+			interrupts = <91 IRQ_TYPE_LEVEL_LOW>,
+				     <79 IRQ_TYPE_LEVEL_LOW>,
+				     <85 IRQ_TYPE_LEVEL_LOW>,
+				     <73 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			clock-frequency = <133333333>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, type>
+		 */
+		ipic: interrupt-controller@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <0x43 IRQ_TYPE_LEVEL_LOW
+				      0x4  IRQ_TYPE_LEVEL_LOW
+				      0x51 IRQ_TYPE_LEVEL_LOW
+				      0x52 IRQ_TYPE_LEVEL_LOW
+				      0x56 IRQ_TYPE_LEVEL_LOW
+				      0x57 IRQ_TYPE_LEVEL_LOW
+				      0x58 IRQ_TYPE_LEVEL_LOW
+				      0x59 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = < &ipic >;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
+				     "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			fsl,mpc8313-wakeup-timer = <&gtm1>;
+		};
+
+		gpio: gpio-controller@c00 {
+			compatible = "fsl,mpc8314-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x0E -mini PCI */
+				 0x7000 0x0 0x0 0x1 &ipic 18 IRQ_TYPE_LEVEL_LOW
+				 0x7000 0x0 0x0 0x2 &ipic 18 IRQ_TYPE_LEVEL_LOW
+				 0x7000 0x0 0x0 0x3 &ipic 18 IRQ_TYPE_LEVEL_LOW
+				 0x7000 0x0 0x0 0x4 &ipic 18 IRQ_TYPE_LEVEL_LOW
+
+				/* IDSEL 0x0F -mini PCI */
+				 0x7800 0x0 0x0 0x1 &ipic 17 IRQ_TYPE_LEVEL_LOW
+				 0x7800 0x0 0x0 0x2 &ipic 17 IRQ_TYPE_LEVEL_LOW
+				 0x7800 0x0 0x0 0x3 &ipic 17 IRQ_TYPE_LEVEL_LOW
+				 0x7800 0x0 0x0 0x4 &ipic 17 IRQ_TYPE_LEVEL_LOW
+
+				/* IDSEL 0x10 - PCI slot */
+				 0x8000 0x0 0x0 0x1 &ipic 48 IRQ_TYPE_LEVEL_LOW
+				 0x8000 0x0 0x0 0x2 &ipic 17 IRQ_TYPE_LEVEL_LOW
+				 0x8000 0x0 0x0 0x3 &ipic 48 IRQ_TYPE_LEVEL_LOW
+				 0x8000 0x0 0x0 0x4 &ipic 17 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 IRQ_TYPE_LEVEL_LOW>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 IRQ_TYPE_LEVEL_LOW
+				 0 0 0 2 &ipic 1 IRQ_TYPE_LEVEL_LOW
+				 0 0 0 3 &ipic 1 IRQ_TYPE_LEVEL_LOW
+				 0 0 0 4 &ipic 1 IRQ_TYPE_LEVEL_LOW>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 IRQ_TYPE_LEVEL_LOW
+				 0 0 0 2 &ipic 2 IRQ_TYPE_LEVEL_LOW
+				 0 0 0 3 &ipic 2 IRQ_TYPE_LEVEL_LOW
+				 0 0 0 4 &ipic 2 IRQ_TYPE_LEVEL_LOW>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc0000000
+				  0x02000000 0 0xc0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		led-hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
new file mode 100644
index 000000000..06f134490
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC832x RDB Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8323ERDB";
+	compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet1;
+		ethernet1 = &enet0;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8323@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <0x20>;	// 32 bytes
+			i-cache-line-size = <0x20>;	// 32 bytes
+			d-cache-size = <16384>;	// L1, 16K
+			i-cache-size = <16384>;	// L1, 16K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc8323@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		watchdog@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		ipic:pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		par_io@1400 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1400 0x100>;
+			ranges = <3 0x1448 0x18>;
+			compatible = "fsl,mpc8323-qe-pario";
+			device_type = "par_io";
+			num-ports = <7>;
+
+			qe_pio_d: gpio-controller@1448 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8323-qe-pario-bank";
+				reg = <3 0x18>;
+				gpio-controller;
+			};
+
+			ucc2pio:ucc_pin@2 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					3  4  3  0  2  0 	/* MDIO */
+					3  5  1  0  2  0 	/* MDC */
+					3 21  2  0  1  0 	/* RX_CLK (CLK16) */
+					3 23  2  0  1  0 	/* TX_CLK (CLK3) */
+					0 18  1  0  1  0 	/* TxD0 */
+					0 19  1  0  1  0 	/* TxD1 */
+					0 20  1  0  1  0 	/* TxD2 */
+					0 21  1  0  1  0 	/* TxD3 */
+					0 22  2  0  1  0 	/* RxD0 */
+					0 23  2  0  1  0 	/* RxD1 */
+					0 24  2  0  1  0 	/* RxD2 */
+					0 25  2  0  1  0 	/* RxD3 */
+					0 26  2  0  1  0 	/* RX_ER */
+					0 27  1  0  1  0 	/* TX_ER */
+					0 28  2  0  1  0 	/* RX_DV */
+					0 29  2  0  1  0 	/* COL */
+					0 30  1  0  1  0 	/* TX_EN */
+					0 31  2  0  1  0>;      /* CRS */
+			};
+			ucc3pio:ucc_pin@3 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0 13  2  0  1  0 	/* RX_CLK (CLK9) */
+					3 24  2  0  1  0 	/* TX_CLK (CLK10) */
+					1  0  1  0  1  0 	/* TxD0 */
+					1  1  1  0  1  0 	/* TxD1 */
+					1  2  1  0  1  0 	/* TxD2 */
+					1  3  1  0  1  0 	/* TxD3 */
+					1  4  2  0  1  0 	/* RxD0 */
+					1  5  2  0  1  0 	/* RxD1 */
+					1  6  2  0  1  0 	/* RxD2 */
+					1  7  2  0  1  0 	/* RxD3 */
+					1  8  2  0  1  0 	/* RX_ER */
+					1  9  1  0  1  0 	/* TX_ER */
+					1 10  2  0  1  0 	/* RX_DV */
+					1 11  2  0  1  0 	/* COL */
+					1 12  1  0  1  0 	/* TX_EN */
+					1 13  2  0  1  0>;      /* CRS */
+			};
+		};
+	};
+
+	qe@e0100000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xe0100000 0x00100000>;
+		reg = <0xe0100000 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <198000000>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+
+		muram@10000 {
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x00010000 0x00004000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
+				reg = <0x0 0x4000>;
+			};
+		};
+
+		spi@4c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x4c0 0x40>;
+			interrupts = <2>;
+			interrupt-parent = <&qeic>;
+			cs-gpios = <&qe_pio_d 13 0>;
+			mode = "cpu-qe";
+
+			mmc-slot@0 {
+				compatible = "fsl,mpc8323rdb-mmc-slot",
+					     "mmc-spi-slot";
+				reg = <0>;
+				gpios = <&qe_pio_d 14 1
+					 &qe_pio_d 15 0>;
+				voltage-ranges = <3300 3300>;
+				spi-max-frequency = <50000000>;
+			};
+		};
+
+		spi@500 {
+			cell-index = <1>;
+			compatible = "fsl,spi";
+			reg = <0x500 0x40>;
+			interrupts = <1>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		enet0: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <2>;
+			reg = <0x3000 0x200>;
+			interrupts = <33>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk16";
+			tx-clock-name = "clk3";
+			phy-handle = <&phy00>;
+			pio-handle = <&ucc2pio>;
+		};
+
+		enet1: ucc@2200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <3>;
+			reg = <0x2200 0x200>;
+			interrupts = <34>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk9";
+			tx-clock-name = "clk10";
+			phy-handle = <&phy04>;
+			pio-handle = <&ucc3pio>;
+		};
+
+		mdio@3120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			phy00:ethernet-phy@0 {
+				reg = <0x0>;
+			};
+			phy04:ethernet-phy@4 {
+				reg = <0x4>;
+			};
+		};
+
+		qeic:interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			big-endian;
+			interrupts = <32 0x8 33 0x8>; //high:32 low:33
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x10 AD16 (USB) */
+				 0x8000 0x0 0x0 0x1 &ipic 17 0x8
+
+				/* IDSEL 0x11 AD17 (Mini1)*/
+				 0x8800 0x0 0x0 0x1 &ipic 18 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 19 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 48 0x8
+
+				/* IDSEL 0x12 AD18 (PCI/Mini2) */
+				 0x9000 0x0 0x0 0x1 &ipic 19 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 48 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
+
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+		sleep = <&pmc 0x00010000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
new file mode 100644
index 000000000..12d33cb55
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8349E-mITX Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8349EMITX";
+	compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;                    // from bootloader
+
+		watchdog@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			eeprom: at24@50 {
+				compatible = "st,24c256", "atmel,24c256";
+				reg = <0x50>;
+			};
+
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <18 0x8>;
+				interrupt-parent = <&ipic>;
+			};
+
+			pcf1: iexp@38 {
+				#gpio-cells = <2>;
+				compatible = "ti,pcf8574a";
+				reg = <0x38>;
+				gpio-controller;
+			};
+
+			pcf2: iexp@39 {
+				#gpio-cells = <2>;
+				compatible = "ti,pcf8574a";
+				reg = <0x39>;
+				gpio-controller;
+			};
+
+			spd: at24@51 {
+				compatible = "atmel,spd";
+				reg = <0x51>;
+			};
+
+			mcu_pio: mcu@a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8349emitx",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@22000 {
+			compatible = "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <39 0x8>;
+			phy_type = "ulpi";
+			port0;
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy1c>;
+			linux,network-index = <0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				/* Vitesse 8201 */
+				phy1c: ethernet-phy@1c {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x1c>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			/* Vitesse 7385 isn't on the MDIO bus */
+			fixed-link = <1 1 1000 0 0>;
+			linux,network-index = <1>;
+			tbi-handle = <&tbi1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			green {
+				label = "Green";
+				gpios = <&pcf1 0 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&pcf1 1 1>;
+				/* linux,default-trigger = "heartbeat"; */
+				default-state = "on";
+			};
+		};
+
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x10 - SATA */
+				0x8000 0x0 0x0 0x1 &ipic 22 0x8 /* SATA_INTA */
+				>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pci@e0008600 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x0E - MiniPCI Slot */
+				0x7000 0x0 0x0 0x1 &ipic 21 0x8 /* PCI_INTA */
+
+				/* IDSEL 0x0F - PCI Slot */
+				0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */
+				0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */
+				>;
+		interrupt-parent = <&ipic>;
+		interrupts = <67 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008600 0x100		/* internal registers */
+		       0xe0008380 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8349e-localbus",
+			     "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0x0 0x0 0xfe000000 0x1000000	/* flash */
+			  0x1 0x0 0xf8000000 0x20000	/* VSC 7385 */
+			  0x2 0x0 0xf9000000 0x200000	/* exp slot */
+			  0x3 0x0 0xf0000000 0x210>;	/* CF slot */
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0x0      0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		flash@0,800000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x800000 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		pata@3,0 {
+			compatible = "fsl,mpc8349emitx-pata", "ata-generic";
+			reg = <0x3 0x0 0x10 0x3 0x20c 0x4>;
+			reg-shift = <1>;
+			pio-mode = <6>;
+			interrupts = <23 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
new file mode 100644
index 000000000..2998a233a
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8349E-mITX-GP Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8349EMITXGP";
+	compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;                    // from bootloader
+
+		watchdog@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <18 0x8>;
+				interrupt-parent = <&ipic>;
+			};
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy1c>;
+			linux,network-index = <0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				/* Vitesse 8201 */
+				phy1c: ethernet-phy@1c {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x1c>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+	};
+
+	pci0: pci@e0008600 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x0F - PCI Slot */
+				0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */
+				0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */
+				 >;
+		interrupt-parent = <&ipic>;
+		interrupts = <67 0x8>;
+		bus-range = <0x1 0x1>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008600 0x100		/* internal registers */
+		       0xe0008380 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
new file mode 100644
index 000000000..d3d36fbf4
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8360E RDK Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8360rdk";
+	model = "fsl,mpc8360rdk";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8360@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* filled by u-boot */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* filled by u-boot */
+		reg = <0 0>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc",
+			     "simple-bus";
+		ranges = <0 0xe0000000 0x200000>;
+		reg = <0xe0000000 0x200>;
+		/* filled by u-boot */
+		bus-frequency = <0>;
+
+		watchdog@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <16 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			interrupts = <9 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		serial1: serial@4600 {
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			interrupts = <10 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		ipic: interrupt-controller@700 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,pq2pro-pic", "fsl,ipic";
+			interrupt-controller;
+			reg = <0x700 0x100>;
+		};
+
+		qe_pio_b: gpio-controller@1418 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1418 0x18>;
+			gpio-controller;
+		};
+
+		qe_pio_e: gpio-controller@1460 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1460 0x18>;
+			gpio-controller;
+		};
+
+		qe@100000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "qe";
+			compatible = "fsl,qe", "simple-bus";
+			ranges = <0 0x100000 0x100000>;
+			reg = <0x100000 0x480>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+			bus-frequency = <0>;
+			brg-frequency = <0>;
+			fsl,qe-num-riscs = <2>;
+			fsl,qe-num-snums = <28>;
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0 0x10000 0xc000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+						     "fsl,cpm-muram-data";
+					reg = <0 0xc000>;
+				};
+			};
+
+			timer@440 {
+				compatible = "fsl,mpc8360-qe-gtm",
+					     "fsl,qe-gtm", "fsl,gtm";
+				reg = <0x440 0x40>;
+				interrupts = <12 13 14 15>;
+				interrupt-parent = <&qeic>;
+				clock-frequency = <166666666>;
+			};
+
+			usb@6c0 {
+				compatible = "fsl,mpc8360-qe-usb",
+					     "fsl,mpc8323-qe-usb";
+				reg = <0x6c0 0x40 0x8b00 0x100>;
+				interrupts = <11>;
+				interrupt-parent = <&qeic>;
+				fsl,fullspeed-clock = "clk21";
+				gpios = <&qe_pio_b  2 0 /* USBOE */
+					 &qe_pio_b  3 0 /* USBTP */
+					 &qe_pio_b  8 0 /* USBTN */
+					 &qe_pio_b  9 0 /* USBRP */
+					 &qe_pio_b 11 0 /* USBRN */
+					 &qe_pio_e 20 0 /* SPEED */
+					 &qe_pio_e 21 1 /* POWER */>;
+			};
+
+			spi@4c0 {
+				cell-index = <0>;
+				compatible = "fsl,spi";
+				reg = <0x4c0 0x40>;
+				interrupts = <2>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			spi@500 {
+				cell-index = <1>;
+				compatible = "fsl,spi";
+				reg = <0x500 0x40>;
+				interrupts = <1>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			enet0: ucc@2000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk9";
+				phy-handle = <&phy2>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet1: ucc@3000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <2>;
+				reg = <0x3000 0x200>;
+				interrupts = <33>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk4";
+				phy-handle = <&phy4>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet2: ucc@2600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <7>;
+				reg = <0x2600 0x200>;
+				interrupts = <42>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk20";
+				tx-clock-name = "clk19";
+				phy-handle = <&phy1>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet3: ucc@3200 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <4>;
+				reg = <0x3200 0x200>;
+				interrupts = <35>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk8";
+				tx-clock-name = "clk7";
+				phy-handle = <&phy3>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			mdio@2120 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,ucc-mdio";
+				reg = <0x2120 0x18>;
+
+				phy1: ethernet-phy@1 {
+					compatible = "national,DP83848VV";
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					compatible = "national,DP83848VV";
+					reg = <3>;
+				};
+
+				phy4: ethernet-phy@4 {
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <4>;
+				};
+			};
+
+			serial2: ucc@2400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x2400 0x200>;
+				cell-index = <5>;
+				port-number = <0>;
+				rx-clock-name = "brg7";
+				tx-clock-name = "brg8";
+				interrupts = <40>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			serial3: ucc@3400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x3400 0x200>;
+				cell-index = <6>;
+				port-number = <1>;
+				rx-clock-name = "brg13";
+				tx-clock-name = "brg14";
+				interrupts = <41>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			qeic: interrupt-controller@80 {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				compatible = "fsl,qe-ic";
+				interrupt-controller;
+				reg = <0x80 0x80>;
+				big-endian;
+				interrupts = <32 8 33 8>;
+				interrupt-parent = <&ipic>;
+			};
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xff800000 0x0800000
+			  1 0 0x60000000 0x0001000
+			  2 0 0x70000000 0x4000000>;
+
+		flash@0,0 {
+			compatible = "intel,PC28F640P30T85", "cfi-flash";
+			reg = <0 0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		upm@1,0 {
+			compatible = "fsl,upm-nand";
+			reg = <1 0 1>;
+			fsl,upm-addr-offset = <16>;
+			fsl,upm-cmd-offset = <8>;
+			gpios = <&qe_pio_e 18 0>;
+
+			flash {
+				compatible = "st,nand512-a";
+			};
+		};
+
+		display@2,0 {
+			device_type = "display";
+			compatible = "fujitsu,MB86277", "fujitsu,mint";
+			reg = <2 0 0x4000000>;
+			fujitsu,sh3;
+			little-endian;
+			/* filled by u-boot */
+			address = <0>;
+			depth = <0>;
+			width = <0>;
+			height = <0>;
+			linebytes = <0>;
+			/* linux,opened; - added by uboot */
+		};
+	};
+
+	pci0: pci@e0008500 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
+		interrupts = <66 8>;
+		interrupt-parent = <&ipic>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */
+				 0xa000 0 0 1 &ipic 18 8
+				 0xa000 0 0 2 &ipic 19 8
+
+				 /* PCI1 IDSEL 0x15 AD21 */
+				 0xa800 0 0 1 &ipic 19 8
+				 0xa800 0 0 2 &ipic 20 8
+				 0xa800 0 0 3 &ipic 21 8
+				 0xa800 0 0 4 &ipic 18 8>;
+		sleep = <&pmc 0x00010000>;
+		/* filled by u-boot */
+		bus-range = <0 0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
new file mode 100644
index 000000000..f4244a7a3
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8377E RDB Device Tree Source
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8377rdb";
+	model = "fsl,mpc8377rdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8377@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00008000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		watchdog@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				dtt@48 {
+					compatible = "national,lm75";
+					reg = <0x48>;
+				};
+
+				at24@50 {
+					compatible = "atmel,24c256";
+					reg = <0x50>;
+				};
+
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+
+				mcu_pio: mcu@a {
+					#gpio-cells = <2>;
+					compatible = "fsl,mc9s08qg8-mpc8377erdb",
+						     "fsl,mcu-mpc8349emitx";
+					reg = <0x0a>;
+					gpio-controller;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
+				/* Filled in by U-Boot */
+				clock-frequency = <111111111>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			fixed-link = <1 1 1000 0 0>;
+			tbi-handle = <&tbi1>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x000000c0>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000030>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
+
+				/* IDSEL AD14 IRQ6 inta */
+				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
+				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
+				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
+				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
+				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
+				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		sleep = <&pmc 0x00300000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa8000000
+				  0x02000000 0 0xa8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 8
+				 0 0 0 2 &ipic 2 8
+				 0 0 0 3 &ipic 2 8
+				 0 0 0 4 &ipic 2 8>;
+		sleep = <&pmc 0x000c0000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc8000000
+				  0x02000000 0 0xc8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts
new file mode 100644
index 000000000..77ee5f8db
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8377E WLAN Device Tree Source
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ * Copyright 2009 MontaVista Software, Inc.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8377wlan";
+	model = "fsl,mpc8377wlan";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8377@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+		ranges = <0x0 0x0 0xfc000000 0x04000000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				reg = <0 0x80000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@a0000 {
+				reg = <0xa0000 0x300000>;
+				label = "kernel";
+			};
+
+			partition@3a0000 {
+				reg = <0x3a0000 0x3c60000>;
+				label = "rootfs";
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		watchdog@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				at24@50 {
+					compatible = "atmel,24c256";
+					reg = <0x50>;
+				};
+
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
+				clock-frequency = <133333333>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x3>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy3>;
+			tbi-handle = <&tbi1>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x000000c0>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000030>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
+
+				/* IDSEL AD14 IRQ6 inta */
+				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+				/* IDSEL AD15 IRQ5 inta */
+				 0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		sleep = <&pmc 0x00300000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa8000000
+				  0x02000000 0 0xa8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 8
+				 0 0 0 2 &ipic 2 8
+				 0 0 0 3 &ipic 2 8
+				 0 0 0 4 &ipic 2 8>;
+		sleep = <&pmc 0x000c0000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc8000000
+				  0x02000000 0 0xc8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
new file mode 100644
index 000000000..9ae4ed5ff
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8378E RDB Device Tree Source
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8378rdb";
+	model = "fsl,mpc8378rdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8378@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00008000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		watchdog@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				dtt@48 {
+					compatible = "national,lm75";
+					reg = <0x48>;
+				};
+
+				at24@50 {
+					compatible = "atmel,24c256";
+					reg = <0x50>;
+				};
+
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+
+				mcu_pio: mcu@a {
+					#gpio-cells = <2>;
+					compatible = "fsl,mc9s08qg8-mpc8378erdb",
+						     "fsl,mcu-mpc8349emitx";
+					reg = <0x0a>;
+					gpio-controller;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
+				/* Filled in by U-Boot */
+				clock-frequency = <111111111>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			fixed-link = <1 1 1000 0 0>;
+			tbi-handle = <&tbi1>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
+
+				/* IDSEL AD14 IRQ6 inta */
+				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
+				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
+				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
+				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
+				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
+				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		sleep = <&pmc 0x00300000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa8000000
+				  0x02000000 0 0xa8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 8
+				 0 0 0 2 &ipic 2 8
+				 0 0 0 3 &ipic 2 8
+				 0 0 0 4 &ipic 2 8>;
+		sleep = <&pmc 0x000c0000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc8000000
+				  0x02000000 0 0xc8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
new file mode 100644
index 000000000..214611dc6
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8379E RDB Device Tree Source
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8379rdb";
+	model = "fsl,mpc8379rdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8379@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;	// 256MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00008000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		watchdog@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				dtt@48 {
+					compatible = "national,lm75";
+					reg = <0x48>;
+				};
+
+				at24@50 {
+					compatible = "atmel,24c256";
+					reg = <0x50>;
+				};
+
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+
+				mcu_pio: mcu@a {
+					#gpio-cells = <2>;
+					compatible = "fsl,mc9s08qg8-mpc8379erdb",
+						     "fsl,mcu-mpc8349emitx";
+					reg = <0x0a>;
+					gpio-controller;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
+				/* Filled in by U-Boot */
+				clock-frequency = <111111111>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			fixed-link = <1 1 1000 0 0>;
+			tbi-handle = <&tbi1>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x000000c0>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000030>;
+		};
+
+		sata@1a000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x1a000 0x1000>;
+			interrupts = <46 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x0000000c>;
+		};
+
+		sata@1b000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x1b000 0x1000>;
+			interrupts = <47 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000003>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
+
+				/* IDSEL AD14 IRQ6 inta */
+				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
+				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
+				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
+				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
+
+				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
+				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
+				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
+				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
new file mode 100644
index 000000000..ff60d678c
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC866 ADS Device Tree Source
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC866ADS";
+	compatible = "fsl,mpc866ads";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,866@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <16>;	// 16 bytes
+			i-cache-line-size = <16>;	// 16 bytes
+			d-cache-size = <0x2000>;		// L1, 8K
+			i-cache-size = <0x4000>;		// L1, 16K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x800000>;
+	};
+
+	localbus@ff000100 {
+		compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xff000100 0x40>;
+
+		ranges = <
+			0x1 0x0 0xff080000 0x8000
+			0x5 0x0 0xff0a0000 0x8000
+		>;
+
+		board-control@1,0 {
+			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
+			compatible = "fsl,mpc866ads-bcsr";
+		};
+	};
+
+	soc@ff000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xff000000 0x100000>;
+		reg = <0xff000000 0x200>;
+		bus-frequency = <0>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			PHY: ethernet-phy@f {
+				reg = <0xf>;
+			};
+		};
+
+		ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc866-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY>;
+			linux,network-index = <0>;
+		};
+
+		PIC: pic@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x24>;
+			compatible = "fsl,mpc866-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc866-cpm", "fsl,cpm1";
+			ranges;
+			reg = <0x9c0 0x40>;
+			brg-frequency = <0>;
+			interrupts = <0 2>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x1c00>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc866-brg",
+					     "fsl,cpm1-brg",
+					     "fsl,cpm-brg";
+				reg = <0x9f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			CPM_PIC: pic@930 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc866-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+
+			serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc866-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x90>;
+			};
+
+			serial@a90 {
+				device_type = "serial";
+				compatible = "fsl,mpc866-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa90 0x10 0x3f80 0x40>;
+				interrupts = <3>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0xd0>;
+			};
+
+			ethernet@a00 {
+				device_type = "network";
+				compatible = "fsl,mpc866-scc-enet",
+				             "fsl,cpm1-scc-enet";
+				reg = <0xa00 0x18 0x3c00 0x100>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <30>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0000>;
+				linux,network-index = <1>;
+			};
+
+			i2c@860 {
+				compatible = "fsl,mpc866-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	chosen {
+		stdout-path = "/soc/cpm/serial@a80";
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
new file mode 100644
index 000000000..be58e7f29
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC885 ADS Device Tree Source
+ *
+ * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC885ADS";
+	compatible = "fsl,mpc885ads";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,885@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	localbus@ff000100 {
+		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xff000100 0x40>;
+
+		ranges = <
+			0x0 0x0 0xfe000000 0x800000
+			0x1 0x0 0xff080000 0x8000
+			0x5 0x0 0xff0a0000 0x8000
+		>;
+
+		flash@0,0 {
+			compatible = "jedec-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <4>;
+			device-width = <1>;
+		};
+
+		board-control@1,0 {
+			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
+			compatible = "fsl,mpc885ads-bcsr";
+		};
+	};
+
+	soc@ff000000 {
+		compatible = "fsl,mpc885", "fsl,pq1-soc";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xff000000 0x28000>;
+		bus-frequency = <0>;
+
+		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+		reg = <0xff000000 0x4000>;
+
+		mdio@e00 {
+			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			PHY0: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+
+			PHY1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+
+			PHY2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+
+		ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY0>;
+			linux,network-index = <0>;
+		};
+
+		ethernet@1e00 {
+			device_type = "network";
+			compatible = "fsl,mpc885-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0x1e00 0x188>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <7 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY1>;
+			linux,network-index = <1>;
+		};
+
+		PIC: interrupt-controller@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x24>;
+			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
+		};
+
+		pcmcia@80 {
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			compatible = "fsl,pq-pcmcia";
+			device_type = "pcmcia";
+			reg = <0x80 0x80>;
+			interrupt-parent = <&PIC>;
+			interrupts = <13 1>;
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
+			command-proc = <0x9c0>;
+			interrupts = <0>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+			reg = <0x9c0 0x40>;
+			ranges;
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x1c00>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc885-brg",
+				             "fsl,cpm1-brg",
+				             "fsl,cpm-brg";
+				clock-frequency = <0>;
+				reg = <0x9f0 0x10>;
+			};
+
+			CPM_PIC: interrupt-controller@930 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc885-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+			serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc885-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x90>;
+			};
+
+			serial@a90 {
+				device_type = "serial";
+				compatible = "fsl,mpc885-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa90 0x10 0x3f80 0x40>;
+				interrupts = <3>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0xd0>;
+			};
+
+			ethernet@a40 {
+				device_type = "network";
+				compatible = "fsl,mpc885-scc-enet",
+				             "fsl,cpm1-scc-enet";
+				reg = <0xa40 0x18 0x3e00 0x100>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				interrupts = <28>;
+				interrupt-parent = <&CPM_PIC>;
+				phy-handle = <&PHY2>;
+				fsl,cpm-command = <0x80>;
+				linux,network-index = <2>;
+			};
+
+			i2c@860 {
+				compatible = "fsl,mpc885-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		crypto@20000 {
+			compatible = "fsl,sec1.2", "fsl,sec1.0";
+			reg = <0x20000 0x8000>;
+			interrupts = <1 1>;
+			interrupt-parent = <&PIC>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x05000154>;
+		};
+	};
+
+	chosen {
+		stdout-path = "/soc/cpm/serial@a80";
+	};
+};
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
new file mode 100644
index 000000000..e88a7bd40
--- /dev/null
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Manroland mucmc52 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+/* Timer pins that need to be in GPIO mode */
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
+/* Disabled timers */
+&gpt4 { status = "disabled"; };
+&gpt5 { status = "disabled"; };
+&gpt6 { status = "disabled"; };
+&gpt7 { status = "disabled"; };
+
+/ {
+	model = "manroland,mucmc52";
+	compatible = "manroland,mucmc52";
+
+	soc5200@f0000000 {
+		rtc@800 {
+			status = "disabled";
+		};
+
+		can@900 {
+			status = "disabled";
+		};
+
+		can@980 {
+			status = "disabled";
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		usb@1000 {
+			status = "disabled";
+		};
+
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {		// PSC5
+			status = "disabled";
+		};
+
+		psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				compatible = "intel,lxt971";
+				reg = <0>;
+			};
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IDSEL 0x10 */
+				0x8000 0 0 1 &mpc5200_pic 0 3 3
+				0x8000 0 0 2 &mpc5200_pic 0 3 3
+				0x8000 0 0 3 &mpc5200_pic 0 2 3
+				0x8000 0 0 4 &mpc5200_pic 0 1 3
+				>;
+		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+
+	localbus {
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00020000>;
+			};
+			partition@760000 {
+				label = "red. Env";
+				reg = <0x00760000 0x00020000>;
+			};
+			partition@780000 {
+				label = "reserve";
+				reg = <0x00780000 0x00080000>;
+			};
+		};
+
+		simple100: gpio-controller-100@3,600100 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600100 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple104: gpio-controller-104@3,600104 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600104 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple200: gpio-controller-200@3,600200 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600200 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple201: gpio-controller-201@3,600201 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600201 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple202: gpio-controller-202@3,600202 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600202 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple203: gpio-controller-203@3,600203 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600203 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple204: gpio-controller-204@3,600204 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600204 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple206: gpio-controller-206@3,600206 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600206 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple207: gpio-controller-207@3,600207 {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x00600207 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		simple20f: gpio-controller-20f@3,60020f {
+			compatible = "manroland,mucmc52-aux-gpio";
+			reg = <3 0x0060020f 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+	};
+};
diff --git a/arch/powerpc/boot/dts/mvme5100.dts b/arch/powerpc/boot/dts/mvme5100.dts
new file mode 100644
index 000000000..a7eb6d259
--- /dev/null
+++ b/arch/powerpc/boot/dts/mvme5100.dts
@@ -0,0 +1,185 @@
+/*
+ * Device Tree Source for Motorola/Emerson MVME5100.
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MVME5100";
+	compatible = "MVME5100";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,7410 {
+			device_type = "cpu";
+			reg = <0x0>;
+			/* Following required by dtc but not used */
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			timebase-frequency = <25000000>;
+			clock-frequency = <500000000>;
+			bus-frequency = <100000000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	hawk@fef80000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "hawk-bridge", "simple-bus";
+		ranges = <0x0 0xfef80000 0x10000>;
+		reg = <0xfef80000 0x10000>;
+
+		serial0: serial@8000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x8000 0x80>;
+			reg-shift = <4>;
+			clock-frequency = <1843200>;
+			current-speed = <9600>;
+			interrupts = <1 1>; // IRQ1 Level Active Low.
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@8200 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x8200 0x80>;
+			reg-shift = <4>;
+			clock-frequency = <1843200>;
+			current-speed = <9600>;
+			interrupts = <1 1>; // IRQ1 Level Active Low.
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: interrupt-controller@f3f80000 {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <0xf3f80000 0x40000>;
+		};
+	};
+
+	pci0: pci@feff0000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "hawk-pci";
+		reg = <0xfec00000 0x400000>;
+		8259-interrupt-acknowledge = <0xfeff0030>;
+		ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0x800000
+			  0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/*
+			 * This definition (IDSEL 11) duplicates the
+			 * interrupts definition in the i8259
+			 * interrupt controller below.
+			 *
+			 * Do not change the interrupt sense/polarity from
+			 * 0x2 to anything else, doing so will cause endless
+			 * "spurious" i8259 interrupts to be fielded.
+			 */
+			// IDSEL 11 - iPMC712 PCI/ISA Bridge
+			0x5800 0x0 0x0 0x1 &mpic 0x0 0x2
+			0x5800 0x0 0x0 0x2 &mpic 0x0 0x2
+			0x5800 0x0 0x0 0x3 &mpic 0x0 0x2
+			0x5800 0x0 0x0 0x4 &mpic 0x0 0x2
+
+			/* IDSEL 12 - Not Used */
+
+			/* IDSEL 13 - Universe VME Bridge */
+			0x6800 0x0 0x0 0x1 &mpic 0x5 0x1
+			0x6800 0x0 0x0 0x2 &mpic 0x6 0x1
+			0x6800 0x0 0x0 0x3 &mpic 0x7 0x1
+			0x6800 0x0 0x0 0x4 &mpic 0x8 0x1
+
+			/* IDSEL 14 - ENET 1 */
+			0x7000 0x0 0x0 0x1 &mpic 0x2 0x1
+
+			/* IDSEL 15 - Not Used */
+
+			/* IDSEL 16 - PMC Slot 1 */
+			0x8000 0x0 0x0 0x1 &mpic 0x9 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0xa 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0xb 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+			/* IDSEL 17 - PMC Slot 2 */
+			0x8800 0x0 0x0 0x1 &mpic 0xc 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x9 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0xa 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0xb 0x1
+
+			/* IDSEL 18 - Not Used */
+
+			/* IDSEL 19 - ENET 2 */
+			0x9800 0x0 0x0 0x1 &mpic 0xd 0x1
+
+			/* IDSEL 20 - PMCSPAN (PCI-X) */
+			0xa000 0x0 0x0 0x1 &mpic 0x9 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0xa 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+		>;
+
+		isa {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			device_type = "isa";
+			compatible = "isa";
+			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
+			interrupt-parent = <&i8259>;
+
+			i8259: interrupt-controller@20 {
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupts = <0 2>;
+				device_type = "interrupt-controller";
+				compatible = "chrp,iic";
+				interrupt-controller;
+				reg = <1 0x00000020 0x00000002
+                                       1 0x000000a0 0x00000002
+                                       1 0x000004d0 0x00000002>;
+				interrupt-parent = <&mpic>;
+			};
+
+		};
+
+	};
+
+	chosen {
+		stdout-path = &serial0;
+        };
+
+};
diff --git a/arch/powerpc/boot/dts/o2d.dts b/arch/powerpc/boot/dts/o2d.dts
new file mode 100644
index 000000000..e0a8d3034
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * O2D Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2d";
+	compatible = "ifm,o2d";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;  // 128MB
+	};
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe3000000 0x00100000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+			/* o2d specific partitions */
+			partition@2c0000 {
+				label = "o2d user defined";
+				reg = <0x002c0000 0x01d40000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
new file mode 100644
index 000000000..7e52509fa
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * O2D base Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 {
+	gpio-controller;
+	fsl,has-wdt;
+	fsl,wdt-on-boot = <0>;
+};
+&gpt1 { gpio-controller; };
+
+/ {
+	model = "ifm,o2d";
+	compatible = "ifm,o2d";
+
+	memory@0 {
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+
+		rtc@800 {
+			status = "disabled";
+		};
+
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+		};
+
+		psc@2200 {		// PSC2
+			status = "disabled";
+		};
+
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2c00 {		// PSC6
+			status = "disabled";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+	};
+
+	localbus {
+		ranges = <0 0 0xff000000 0x01000000
+			  3 0 0xe3000000 0x00100000>;
+
+		// flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+			no-unaligned-direct-access;
+
+			/* common layout for all machines */
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "env";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+		};
+
+		csi@3,0 {
+			compatible = "ifm,o2d-csi";
+			reg = <3 0 0x00100000>;
+			ifm,csi-clk-handle = <&gpt7>;
+			gpios = <&gpio_simple 23 0	/* imag_capture */
+				 &gpio_simple 26 0	/* imag_reset */
+				 &gpio_simple 29 0>;	/* imag_master_en */
+
+			interrupts = <1 1 2>;		/* IRQ1, edge falling */
+
+			ifm,csi-addr-bus-width = <24>;
+			ifm,csi-data-bus-width = <8>;
+			ifm,csi-wait-cycles = <0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o2d300.dts b/arch/powerpc/boot/dts/o2d300.dts
new file mode 100644
index 000000000..55a25b700
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2d300.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * O2D300 Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2d300";
+	compatible = "ifm,o2d";
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe3000000 0x00100000>;
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@40000 {
+				label = "env_1";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "env_2";
+				reg = <0x00060000 0x00020000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "kernel";
+				reg = <0x00080000 0x00260000>;
+				read-only;
+			};
+			/* o2d300 specific partitions */
+			partition@2e0000 {
+				label = "o2d300 user defined";
+				reg = <0x002e0000 0x01d20000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o2dnt2.dts b/arch/powerpc/boot/dts/o2dnt2.dts
new file mode 100644
index 000000000..c2eedbd1f
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2dnt2.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * O2DNT2 Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2dnt2";
+	compatible = "ifm,o2d";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;  // 128MB
+	};
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe3000000 0x00100000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+
+			/* o2dnt2 specific partitions */
+			partition@2c0000 {
+				label = "o2dnt2 user defined";
+				reg = <0x002c0000 0x01d40000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o2i.dts b/arch/powerpc/boot/dts/o2i.dts
new file mode 100644
index 000000000..3fb2e0ad7
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2i.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * O2I Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2i";
+	compatible = "ifm,o2d";
+
+	localbus {
+		flash@0,0 {
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+			/* o2i specific partitions */
+			partition@2c0000 {
+				label = "o2i user defined";
+				reg = <0x002c0000 0x00d40000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o2mnt.dts b/arch/powerpc/boot/dts/o2mnt.dts
new file mode 100644
index 000000000..c5e0ba6e8
--- /dev/null
+++ b/arch/powerpc/boot/dts/o2mnt.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * O2MNT Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o2mnt";
+	compatible = "ifm,o2d";
+
+	localbus {
+		flash@0,0 {
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+			/* add o2mnt specific partitions */
+			partition@2c0000 {
+				label = "o2mnt user defined";
+				reg = <0x002c0000 0x00d40000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/o3dnt.dts b/arch/powerpc/boot/dts/o3dnt.dts
new file mode 100644
index 000000000..e4c1bdd41
--- /dev/null
+++ b/arch/powerpc/boot/dts/o3dnt.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * O3DNT Device Tree Source
+ *
+ * Copyright (C) 2012 DENX Software Engineering
+ * Anatolij Gustschin <agust@denx.de>
+ */
+
+/include/ "o2d.dtsi"
+
+/ {
+	model = "ifm,o3dnt";
+	compatible = "ifm,o2d";
+
+	memory@0 {
+		reg = <0x00000000 0x04000000>;  // 64MB
+	};
+
+	localbus {
+		ranges = <0 0 0xfc000000 0x01000000
+			  3 0 0xe3000000 0x00100000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@60000 {
+				label = "kernel";
+				reg = <0x00060000 0x00260000>;
+				read-only;
+			};
+
+			/* o3dnt specific partitions */
+			partition@2c0000 {
+				label = "o3dnt user defined";
+				reg = <0x002c0000 0x00d40000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
new file mode 100644
index 000000000..5cee474dc
--- /dev/null
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
+ *
+ * Copyright 2006 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright 2007 Pengutronix
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
+/ {
+	model = "phytec,pcm030";
+	compatible = "phytec,pcm030";
+
+	soc5200@f0000000 {
+		audioplatform: psc@2000 { /* PSC1 in ac97 mode */
+			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
+			cell-index = <0>;
+		};
+
+		/* PSC2 port is used by CAN1/2 */
+		psc@2200 {
+			status = "disabled";
+		};
+
+		psc@2400 { /* PSC3 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		/* PSC4 is ??? */
+		psc@2600 {
+			status = "disabled";
+		};
+
+		/* PSC5 is ??? */
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 { /* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		i2c@3d40 {
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "catalyst,24c32", "atmel,24c32";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+				 0xc000 0 0 2 &mpc5200_pic 1 1 3
+				 0xc000 0 0 3 &mpc5200_pic 1 2 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+				 0xc800 0 0 2 &mpc5200_pic 1 2 3
+				 0xc800 0 0 3 &mpc5200_pic 1 3 3
+				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	localbus {
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "phytec,pcm030-audio-fabric";
+		asoc-platform = <&audioplatform>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
new file mode 100644
index 000000000..d00f13b62
--- /dev/null
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source
+ *
+ * Copyright (C) 2006-2009 Pengutronix
+ * Sascha Hauer, Juergen Beisert, Wolfram Sang <kernel@pengutronix.de>
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
+/ {
+	model = "phytec,pcm032";
+	compatible = "phytec,pcm032";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;	// 128MB
+	};
+
+	soc5200@f0000000 {
+		psc@2000 {	/* PSC1 is ac97 */
+			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
+			cell-index = <0>;
+		};
+
+		/* PSC2 port is used by CAN1/2 */
+		psc@2200 {
+			status = "disabled";
+		};
+
+		psc@2400 { /* PSC3 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		/* PSC4 is ??? */
+		psc@2600 {
+			status = "disabled";
+		};
+
+		/* PSC5 is ??? */
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 { /* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		i2c@3d40 {
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "catalyst,24c32", "atmel,24c32";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+		};
+	};
+
+	pci@f0000d00 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+				 0xc000 0 0 2 &mpc5200_pic 1 1 3
+				 0xc000 0 0 3 &mpc5200_pic 1 2 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+				 0xc800 0 0 2 &mpc5200_pic 1 2 3
+				 0xc800 0 0 3 &mpc5200_pic 1 3 3
+				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	localbus {
+		ranges = <0 0 0xfe000000 0x02000000
+			  1 0 0xfc000000 0x02000000
+			  2 0 0xfbe00000 0x00200000
+			  3 0 0xf9e00000 0x02000000
+			  4 0 0xf7e00000 0x02000000
+			  5 0 0xe6000000 0x02000000
+			  6 0 0xe8000000 0x02000000
+			  7 0 0xea000000 0x02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <4>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "ubootl";
+				reg = <0x00000000 0x00040000>;
+			};
+			partition@40000 {
+				label = "kernel";
+				reg = <0x00040000 0x001c0000>;
+			};
+			partition@200000 {
+				label = "jffs2";
+				reg = <0x00200000 0x01d00000>;
+			};
+			partition@1f00000 {
+				label = "uboot";
+				reg = <0x01f00000 0x00040000>;
+			};
+			partition@1f40000 {
+				label = "env";
+				reg = <0x01f40000 0x00040000>;
+			};
+			partition@1f80000 {
+				label = "oftree";
+				reg = <0x01f80000 0x00040000>;
+			};
+			partition@1fc0000 {
+				label = "space";
+				reg = <0x01fc0000 0x00040000>;
+			};
+		};
+
+		sram@2,0 {
+			compatible = "mtd-ram";
+			reg = <2 0 0x00200000>;
+			bank-width = <2>;
+		};
+
+		/*
+		 * example snippets for FPGA
+		 *
+		 * fpga@3,0 {
+		 *	 compatible = "fpga_driver";
+		 *	 reg = <3 0 0x02000000>;
+		 *	 bank-width = <4>;
+		 * };
+		 *
+		 * fpga@4,0 {
+		 *	 compatible = "fpga_driver";
+		 *	 reg = <4 0 0x02000000>;
+		 *	 bank-width = <4>;
+		 * };
+		 */
+
+		/*
+		 * example snippets for free chipselects
+		 *
+		 * device@5,0 {
+		 *	 compatible = "custom_driver";
+		 *	 reg = <5 0 0x02000000>;
+		 * };
+		 *
+		 * device@6,0 {
+		 *	 compatible = "custom_driver";
+		 *	 reg = <6 0 0x02000000>;
+		 * };
+		 *
+		 * device@7,0 {
+		 *	 compatible = "custom_driver";
+		 *	 reg = <7 0 0x02000000>;
+		 * };
+		 */
+	};
+};
diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts
new file mode 100644
index 000000000..67c3b9db7
--- /dev/null
+++ b/arch/powerpc/boot/dts/pdm360ng.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree Source for IFM PDM360NG.
+ *
+ * Copyright 2009 - 2010 DENX Software Engineering.
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * Based on MPC5121E ADS dts.
+ * Copyright 2008 Freescale Semiconductor Inc.
+ */
+
+#include "mpc5121.dtsi"
+
+/ {
+	model = "pdm360ng";
+	compatible = "ifm,pdm360ng", "fsl,mpc5121";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&ipic>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	nfc@40000000 {
+		bank-width = <0x1>;
+		chips = <0x1>;
+
+		partition@0 {
+			label = "nand0";
+			reg = <0x0 0x40000000>;
+		};
+	};
+
+	localbus@80000020 {
+		ranges = <0x0 0x0 0xf0000000 0x10000000   /* Flash */
+			  0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */
+
+		flash@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			reg = <0 0x00000000 0x08000000
+			       0 0x08000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <4>;
+			device-width = <2>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "environment";
+				reg = <0x00080000 0x00080000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "splash-image";
+				reg = <0x00100000 0x00080000>;
+				read-only;
+			};
+			partition@180000 {
+				label = "device-tree";
+				reg = <0x00180000 0x00040000>;
+			};
+			partition@1c0000 {
+				label = "kernel";
+				reg = <0x001c0000 0x00500000>;
+			};
+			partition@6c0000 {
+				label = "filesystem";
+				reg = <0x006c0000 0x07940000>;
+			};
+		};
+
+		mram0@2,0 {
+			compatible = "mtd-ram";
+			reg = <2 0x00000 0x10000>;
+			bank-width = <2>;
+		};
+
+		mram1@2,10000 {
+			compatible = "mtd-ram";
+			reg = <2 0x010000 0x10000>;
+			bank-width = <2>;
+		};
+	};
+
+	soc@80000000 {
+
+		i2c@1700 {
+			fsl,preserve-clocking;
+
+			eeprom@50 {
+				compatible = "atmel,24c01";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@1720 {
+			status = "disabled";
+		};
+
+		i2c@1740 {
+			fsl,preserve-clocking;
+		};
+
+		ethernet@2800 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@2800 {
+			phy0: ethernet-phy@1f {
+				compatible = "smsc,lan8700";
+				reg = <0x1f>;
+			};
+		};
+
+		/* USB1 using external ULPI PHY */
+		usb@3000 {
+			dr_mode = "host";
+		};
+
+		/* USB0 using internal UTMI PHY */
+		usb@4000 {
+			fsl,invert-pwr-fault;
+		};
+
+		psc@11000 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11100 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11200 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11400 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11500 {
+			status = "disabled";
+		};
+
+		psc@11600 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11700 {
+			status = "disabled";
+		};
+
+		psc@11800 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+
+		psc@11900 {
+			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* ADS7845 touch screen controller */
+			ts@0 {
+				compatible = "ti,ads7846";
+				reg = <0x0>;
+				spi-max-frequency = <3000000>;
+				/* pen irq is GPIO25 */
+				interrupts = <78 0x8>;
+			};
+		};
+
+		psc@11a00 {
+			status = "disabled";
+		};
+
+		psc@11b00 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts
new file mode 100644
index 000000000..6bdfba6cb
--- /dev/null
+++ b/arch/powerpc/boot/dts/ps3.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  PS3 Game Console device tree.
+ *
+ *  Copyright (C) 2007 Sony Computer Entertainment Inc.
+ *  Copyright 2007 Sony Corp.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "SonyPS3";
+	compatible = "sony,ps3";
+	#size-cells = <2>;
+	#address-cells = <2>;
+
+	chosen {
+	};
+
+	/*
+	 * We'll get the size of the bootmem block from lv1 after startup,
+	 * so we'll put a null entry here.
+	 */
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x00000000>;
+	};
+
+	/*
+	 * The boot cpu is always zero for PS3.
+	 *
+	 * dtc expects a clock-frequency and timebase-frequency entries, so
+	 * we'll put a null entries here.  These will be initialized after
+	 * startup with data from lv1.
+	 *
+	 * Seems the only way currently to indicate a processor has multiple
+	 * threads is with an ibm,ppc-interrupt-server#s entry.  We'll put one
+	 * here so we can bring up both of ours.  See smp_setup_cpu_maps().
+	 */
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0x00000000>;
+			ibm,ppc-interrupt-server#s = <0x0 0x1>;
+			clock-frequency = <0>;
+			timebase-frequency = <0>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <128>;
+			d-cache-line-size = <128>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts
new file mode 100644
index 000000000..e59829cff
--- /dev/null
+++ b/arch/powerpc/boot/dts/rainier.dts
@@ -0,0 +1,350 @@
+/*
+ * Device Tree Source for AMCC Rainier
+ *
+ * Based on Sequoia code
+ * Copyright (c) 2007 MontaVista Software, Inc.
+ *
+ * FIXME: Draft only!
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,rainier";
+	compatible = "amcc,rainier";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440GRx";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440grx","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440grx","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440grx","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440grx", "ibm,sdr-440ep";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440grx", "ibm,cpr-440ep";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440grx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440grx", "ibm,dma-4xx";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440grx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440grx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <0x7 0x4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440grx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "Kernel";
+						reg = <0x00000000 0x00180000>;
+					};
+					partition@180000 {
+						label = "ramdisk";
+						reg = <0x00180000 0x00200000>;
+					};
+					partition@380000 {
+						label = "file system";
+						reg = <0x00380000 0x03aa0000>;
+					};
+					partition@3e20000 {
+						label = "kozio";
+						reg = <0x03e20000 0x00140000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <115200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x0 0x4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x1 0x4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC1>;
+		   		interrupts = <0x3 0x4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC1>;
+		   		interrupts = <0x4 0x4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-440grx", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440grx", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440grx", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@ef601000 {
+				compatible = "ibm,rgmii-440grx", "ibm,rgmii";
+				reg = <0xef601000 0x00000008>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCI0: pci@1ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440grx-pci", "ibm,plb-pci";
+			primary;
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0x0 0x80000000 0x1 0x80000000 0x0 0x40000000
+				0x01000000 0x0 0x00000000 0x1 0xe8000000 0x0 0x00010000
+				0x01000000 0x0 0x00000000 0x1 0xe8800000 0x0 0x03800000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* All PCI interrupts are routed to IRQ 67 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
+		};
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@ef600300";
+		bootargs = "console=ttyS0,115200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts
new file mode 100644
index 000000000..3c849e23e
--- /dev/null
+++ b/arch/powerpc/boot/dts/redwood.dts
@@ -0,0 +1,368 @@
+/*
+ * Device Tree Source for AMCC Redwood(460SX)
+ *
+ * Copyright 2008 AMCC <tmarri@amcc.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,redwood";
+	compatible = "amcc,redwood";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460SX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460sx";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460sx";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460sx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x62>;
+			num-tx-chans = <4>;
+			num-rx-chans = <32>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x1 0x4
+					/*TXDE*/  0x2 0x4
+					/*RXDE*/  0x3 0x4
+					/*COAL TX0*/ 0x18 0x2
+					/*COAL TX1*/ 0x19 0x2
+					/*COAL TX2*/ 0x1a 0x2
+					/*COAL TX3*/ 0x1b 0x2
+					/*COAL RX0*/ 0x1c 0x2
+					/*COAL RX1*/ 0x1d 0x2
+					/*COAL RX2*/ 0x1e 0x2
+					/*COAL RX3*/ 0x1f 0x2>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460sx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460sx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x0000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			RGMII0: emac-rgmii@ef600900 {
+				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+				reg = <0xef600900 0x00000008>;
+			};
+
+			EMAC0: ethernet@ef600a00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600a00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+		PCIE0: pcie@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pcie@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		PCIE2: pcie@d40000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x30 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
+		};
+
+	};
+
+
+	chosen {
+		stdout-path = "/plb/opb/serial@ef600200";
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/sam440ep.dts b/arch/powerpc/boot/dts/sam440ep.dts
new file mode 100644
index 000000000..7d15f18e1
--- /dev/null
+++ b/arch/powerpc/boot/dts/sam440ep.dts
@@ -0,0 +1,293 @@
+/*
+ * Device Tree Source for ACube Sam440ep  based off bamboo.dts code 
+ * original copyrights below 
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Modified from bamboo.dts for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "acube,sam440ep";
+	compatible = "acube,sam440ep";
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 4 0x1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 2>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 2>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 2>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0 &UIC0 10 4
+					/*RXEOB*/ 1 &UIC0 11 4
+					/*SERR*/  2 &UIC1 0 4
+					/*TXDE*/  3 &UIC1 1 4
+					/*RXDE*/  4 &UIC1 2 4>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+		  	ranges = <0x00000000 0 0x00000000 0x80000000
+			          0x80000000 0 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <7 4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <5 1>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 8>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <0x1c200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0 4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 8>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <1 4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 8>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <3 4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 8>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <4 4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <0>;
+				reg = <0xef600700 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+				rtc@68 {
+					compatible = "st,m41t80";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <5>;
+				reg = <0xef600800 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <7 4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0xc>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				linux,network-index = <0>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 4 0x1d 4>;
+				reg = <0xef600e00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				linux,network-index = <1>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 4 0x1f 4>;
+				reg = <0xef600f00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x80>;
+				interrupts = <8 4 9 4>;
+				interrupt-parent = <&UIC1>;
+			};	
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0 0xeec00000 8	   /* Config space access */
+			       0 0xeed00000 4	   /* IACK */
+			       0 0xeed00000 4	   /* Special cycle */
+			       0 0xef400000 0x40>; /* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0 0xe8000000 0 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0 0 0 0 0 0x80000000>;
+		};
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
new file mode 100644
index 000000000..60d211da9
--- /dev/null
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -0,0 +1,412 @@
+/*
+ * Device Tree Source for AMCC Sequoia
+ *
+ * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright (c) 2006, 2007 IBM Corp.
+ *
+ * FIXME: Draft only!
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,sequoia";
+	compatible = "amcc,sequoia";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EPx";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440epx","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440epx","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440epx","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440epx", "ibm,sdr-440ep";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440epx", "ibm,cpr-440ep";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440epx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		CRYPTO: crypto@e0100000 {
+			compatible = "amcc,ppc440epx-crypto","amcc,ppc4xx-crypto";
+			reg = <0 0xE0100000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x17 0x4>;
+		};
+
+		rng@e0120000 {
+			compatible = "amcc,ppc440epx-rng","amcc,ppc4xx-rng";
+			reg = <0 0xE0120000 0x150>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440epx", "ibm,dma-4xx";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440epx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		USB1: usb@e0000400 {
+			compatible = "ibm,usb-ohci-440epx", "ohci-be";
+			reg = <0x00000000 0xe0000400 0x00000060>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x15 0x8>;
+		};
+
+		USB0: ehci@e0000300 {
+			compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1a 0x4>;
+			reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>;
+			big-endian;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440epx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <0x7 0x4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440epx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "Kernel";
+						reg = <0x00000000 0x00180000>;
+					};
+					partition@180000 {
+						label = "ramdisk";
+						reg = <0x00180000 0x00200000>;
+					};
+					partition@380000 {
+						label = "file system";
+						reg = <0x00380000 0x03aa0000>;
+					};
+					partition@3e20000 {
+						label = "kozio";
+						reg = <0x03e20000 0x00140000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00084000>;
+						};
+						partition@84000 {
+							label = "user";
+							reg = <0x00084000 0x01f7c000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <115200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x0 0x4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x1 0x4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC1>;
+		   		interrupts = <0x3 0x4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC1>;
+		   		interrupts = <0x4 0x4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "ibm,iic-440epx", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+
+				hwmon@48 {
+					compatible = "adi,ad7414";
+					reg = <0x48>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "ibm,iic-440epx", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440epx", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@ef601000 {
+				compatible = "ibm,rgmii-440epx", "ibm,rgmii";
+				reg = <0xef601000 0x00000008>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440epx", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-440epx", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCI0: pci@1ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440epx-pci", "ibm,plb-pci";
+			primary;
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 * From the 440EPx user manual:
+			 * PCI 1 Memory     1 8000 0000     1 BFFF FFFF     1GB
+			 * I/O              1 E800 0000     1 E800 FFFF     64KB
+			 * I/O              1 E880 0000     1 EBFF FFFF     56MB
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* All PCI interrupts are routed to IRQ 67 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
+		};
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@ef600300";
+		bootargs = "console=ttyS0,115200";
+	};
+};
diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts
new file mode 100644
index 000000000..00a56e8e3
--- /dev/null
+++ b/arch/powerpc/boot/dts/socrates.dts
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree Source for the Socrates board (MPC8544).
+ *
+ * Copyright (c) 2008 Emcraft Systems.
+ * Sergei Poselenov, <sposelenov@emcraft.com>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "abb,socrates";
+	compatible = "abb,socrates";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8544@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8544@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+
+		ranges = <0x00000000 0xe0000000 0x00100000>;
+		bus-frequency = <0>;		// Filled in by U-Boot
+		compatible = "fsl,mpc8544-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8544-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8544-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			fsl,preserve-clocking;
+
+			dtt@28 {
+				compatible = "winbond,w83782d";
+				reg = <0x28>;
+			};
+			rtc@32 {
+				compatible = "epson,rx8025";
+				reg = <0x32>;
+				interrupts = <7 1>;
+				interrupt-parent = <&mpic>;
+			};
+			dtt@4c {
+				compatible = "dallas,ds75";
+				reg = <0x4c>;
+			};
+			ts@4a {
+				compatible = "ti,tsc2003";
+				reg = <0x4a>;
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			fsl,preserve-clocking;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <0 1>;
+					reg = <0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <0 1>;
+					reg = <1>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+				};
+			};
+		};
+
+		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			tbi-handle = <&tbi1>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+
+	localbus {
+		compatible = "fsl,mpc8544-localbus",
+		             "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x40>;
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <0 0 0xfc000000 0x04000000
+			  2 0 0xc8000000 0x04000000
+			  3 0 0xc0000000 0x00100000
+			>; /* Overwritten by U-Boot */
+
+		nor_flash@0,0 {
+			compatible = "amd,s29gl256n", "cfi-flash";
+			bank-width = <2>;
+			reg = <0x0 0x000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x1e0000>;
+				read-only;
+			};
+			partition@1e0000 {
+				label = "dtb";
+				reg = <0x1e0000 0x20000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x200000 0x200000>;
+			};
+			partition@400000 {
+				label = "user";
+				reg = <0x400000 0x3b80000>;
+			};
+			partition@3f80000 {
+				label = "env";
+				reg = <0x3f80000 0x40000>;
+				read-only;
+			};
+			partition@3fc0000 {
+				label = "u-boot";
+				reg = <0x3fc0000 0x40000>;
+				read-only;
+			};
+		};
+
+		display@2,0 {
+			compatible = "fujitsu,lime";
+			reg = <2 0x0 0x4000000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <6 1>;
+		};
+
+		fpga_pic: fpga-pic@3,10 {
+			compatible = "abb,socrates-fpga-pic";
+			reg = <3 0x10 0x10>;
+			interrupt-controller;
+			/* IRQs 2, 10, 11, active low, level-sensitive */
+			interrupts = <2 1 10 1 11 1>;
+			interrupt-parent = <&mpic>;
+			#interrupt-cells = <3>;
+		};
+
+		spi@3,60 {
+			compatible = "abb,socrates-spi";
+			reg = <3 0x60 0x10>;
+			interrupts = <8 4 0>;	// number, type, routing
+			interrupt-parent = <&fpga_pic>;
+		};
+
+		nand@3,70 {
+			compatible = "abb,socrates-nand";
+			reg = <3 0x70 0x04>;
+			bank-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			data@0 {
+				label = "data";
+				reg = <0x0 0x40000000>;
+			};
+		};
+
+		can@3,100 {
+			compatible = "philips,sja1000";
+			reg = <3 0x100 0x80>;
+			interrupts = <2 8 1>;	// number, type, routing
+			interrupt-parent = <&fpga_pic>;
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x11 */
+				 0x8800 0x0 0x0 1 &mpic 5 1
+				/* IDSEL 0x12 */
+				 0x9000 0x0 0x0 1 &mpic 4 1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts
new file mode 100644
index 000000000..99f6f544d
--- /dev/null
+++ b/arch/powerpc/boot/dts/storcenter.dts
@@ -0,0 +1,142 @@
+/*
+ * Device Tree Source for IOMEGA StorCenter
+ *
+ * Copyright 2007 Oyvind Repvik
+ * Copyright 2007 Jon Loeliger
+ *
+ * Based on the Kurobox DTS by G. Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "StorCenter";
+	compatible = "iomega,storcenter";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8241@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <200000000>;
+			timebase-frequency = <25000000>;
+			bus-frequency = <0>;	/* from bootwrapper */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	/* 64MB @ 0x0 */
+	};
+
+	soc@fc000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8241", "mpc10x";
+		store-gathering = <0>; /* 0 == off, !0 == on */
+		ranges = <0x0 0xfc000000 0x100000>;
+		reg = <0xfc000000 0x100000>;	/* EUMB */
+		bus-frequency = <0>;		/* fixed by loader */
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x20>;
+			clock-frequency = <97553800>; /* Hz */
+			current-speed = <115200>;
+			interrupts = <25 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x20>;
+			clock-frequency = <97553800>; /* Hz */
+			current-speed = <9600>;
+			interrupts = <26 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: interrupt-controller@40000 {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <0x40000 0x40000>;
+		};
+
+	};
+
+	pci0: pci@fe800000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "mpc10x-pci";
+		reg = <0xfe800000 0x1000>;
+		ranges = <0x01000000 0x0        0x0 0xfe000000 0x0 0x00c00000
+			  0x02000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+		bus-range = <0 0xff>;
+		clock-frequency = <97553800>;
+		interrupt-parent = <&mpic>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 13 - IDE */
+			0x6800 0 0 1 &mpic 0 1
+			0x6800 0 0 2 &mpic 0 1
+			0x6800 0 0 3 &mpic 0 1
+			0x6800 0 0 4 &mpic 0 1
+			/* IDSEL 14 - USB */
+			0x7000 0 0 1 &mpic 0 1
+			0x7000 0 0 2 &mpic 0 1
+			0x7000 0 0 3 &mpic 0 1
+			0x7000 0 0 4 &mpic 0 1
+			/* IDSEL 15 - ETH */
+			0x7800 0 0 1 &mpic 0 1
+			0x7800 0 0 2 &mpic 0 1
+			0x7800 0 0 3 &mpic 0 1
+			0x7800 0 0 4 &mpic 0 1
+		>;
+	};
+
+	chosen {
+		stdout-path = &serial0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
new file mode 100644
index 000000000..e73f7e75b
--- /dev/null
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * STX GP3 - 8560 ADS Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e500v1_power_isa.dtsi"
+
+/ {
+	model = "stx,gp3";
+	compatible = "stx,gp3-8560", "stx,gp3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8560@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc@fdf00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0 0xfdf00000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8560-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 4>;
+					reg = <2>;
+				};
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 4>;
+					reg = <4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy4>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x4000 0x9000 0x2000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8560-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+			};
+
+			serial0: serial@91a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x91a20 0x20 0x88100 0x100>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x4a00000>;
+				interrupts = <41 8>;
+				interrupt-parent = <&cpmpic>;
+			};
+		};
+	};
+
+	pci0: pci@fdf08000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x0c */
+			0x6000 0 0 1 &mpic 1 1
+			0x6000 0 0 2 &mpic 2 1
+			0x6000 0 0 3 &mpic 3 1
+			0x6000 0 0 4 &mpic 4 1
+
+			/* IDSEL 0x0d */
+			0x6800 0 0 1 &mpic 4 1
+			0x6800 0 0 2 &mpic 1 1
+			0x6800 0 0 3 &mpic 2 1
+			0x6800 0 0 4 &mpic 3 1
+
+			/* IDSEL 0x0e */
+			0x7000 0 0 1 &mpic 3 1
+			0x7000 0 0 2 &mpic 4 1
+			0x7000 0 0 3 &mpic 1 1
+			0x7000 0 0 4 &mpic 2 1
+
+			/* IDSEL 0x0f */
+			0x7800 0 0 1 &mpic 2 1
+			0x7800 0 0 2 &mpic 3 1
+			0x7800 0 0 3 &mpic 4 1
+			0x7800 0 0 4 &mpic 1 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xfdf08000 0x1000>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
+};
diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts
new file mode 100644
index 000000000..96add25c9
--- /dev/null
+++ b/arch/powerpc/boot/dts/stxssa8555.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MPC8555-based STx GP3 Device Tree Source
+ *
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+ *
+ * Copyright 2010 Silicon Turnkey Express LLC.
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e500v1_power_isa.dtsi"
+
+/ {
+	model = "stx,gp3";
+        compatible = "stx,gp3-8560", "stx,gp3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8555@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc8555@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8555-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8555-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x2>;
+				};
+				phy1: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000 0x9000 0x1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8555-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x10 */
+			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x11 */
+			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x12 (Slot 1) */
+			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x13 (Slot 2) */
+			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
+
+			/* IDSEL 0x14 (Slot 3) */
+			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x15 (Slot 4) */
+			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
+
+			/* Bus 1 (Tundra Bridge) */
+			/* IDSEL 0x12 (ISA bridge) */
+			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+
+		i8259@19000 {
+			interrupt-controller;
+			device_type = "interrupt-controller";
+			reg = <0x19000 0x0 0x0 0x0 0x1>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "chrp,iic";
+			interrupts = <1>;
+			interrupt-parent = <&pci0>;
+		};
+	};
+
+	pci1: pci@e0009000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0009000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
+};
diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
new file mode 100644
index 000000000..803f1bff7
--- /dev/null
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -0,0 +1,427 @@
+/*
+ * Device Tree Source for IBM/AMCC Taishan
+ *
+ * Copyright 2007 IBM Corp.
+ * Hugh Blemings <hugh@au.ibm.com> based off code by
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,taishan";
+	compatible = "amcc,taishan";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC2;
+		ethernet1 = &EMAC3;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440GX";
+			reg = <0x00000000>;
+			clock-frequency = <800000000>; // 800MHz
+			timebase-frequency = <0>; // Filled in by zImage
+			i-cache-line-size = <50>;
+			d-cache-line-size = <50>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+	};
+
+
+	UICB0: interrupt-controller-base {
+		compatible = "ibm,uic-440gx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x200 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440gx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */
+		interrupt-parent = <&UICB0>;
+
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440gx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x3 0x4 0x2 0x4>; /* cascade */
+		interrupt-parent = <&UICB0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440gx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <2>; /* was 1 */
+		dcr-reg = <0x210 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x5 0x4 0x4 0x4>; /* cascade */
+		interrupt-parent = <&UICB0>;
+	};
+
+
+	CPC0: cpc {
+		compatible = "ibm,cpc-440gp";
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
+		// FIXME: anything else?
+	};
+
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008			/* Internal SRAM DCR's */
+			   0x030 0x008>;		/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC2>;
+		interrupts = <0x17 0x1>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440gx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <160000000>; // 160MHz
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-440gp";
+			dcr-reg = <0x010 0x002>;
+			// FIXME: anything else?
+		};
+
+		SRAM0: sram {
+			compatible = "ibm,sram-440gp";
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
+		};
+
+		DMA0: dma {
+			// FIXME: ???
+			compatible = "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <4>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440gx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x7 0x4>;
+			clock-frequency = <80000000>; // 80MHz
+
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440gx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <80000000>; // 80MHz
+
+				/* ranges property is supplied by zImage
+				 * based on firmware's configuration of the
+				 * EBC bridge */
+
+				interrupts = <0x5 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <4>;
+					device-width = <2>;
+					reg = <0x0 0x0 0x4000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x0 0x180000>;
+					};
+					partition@180000 {
+						label = "root";
+						reg = <0x180000 0x200000>;
+					};
+					partition@380000 {
+						label = "user";
+						reg = <0x380000 0x3bc0000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x3f40000 0x80000>;
+					};
+					partition@3fc0000 {
+						label = "u-boot";
+						reg = <0x3fc0000 0x40000>;
+					};
+				};
+			};
+
+
+
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+ 				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@40000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@40000400 {
+				/* FIXME */
+				compatible = "ibm,iic-440gp", "ibm,iic";
+				reg = <0x40000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+			IIC1: i2c@40000500 {
+				/* FIXME */
+				compatible = "ibm,iic-440gp", "ibm,iic";
+				reg = <0x40000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+			};
+
+			GPIO0: gpio@40000700 {
+				/* FIXME */
+				compatible = "ibm,gpio-440gp";
+				reg = <0x40000700 0x00000020>;
+			};
+
+			ZMII0: emac-zmii@40000780 {
+				compatible = "ibm,zmii-440gx", "ibm,zmii";
+				reg = <0x40000780 0x0000000c>;
+			};
+
+			RGMII0: emac-rgmii@40000790 {
+				compatible = "ibm,rgmii";
+				reg = <0x40000790 0x00000008>;
+			};
+
+			TAH0: emac-tah@40000b50 {
+				compatible = "ibm,tah-440gx", "ibm,tah";
+				reg = <0x40000b50 0x00000030>;
+			};
+
+			TAH1: emac-tah@40000d50 {
+				compatible = "ibm,tah-440gx", "ibm,tah";
+				reg = <0x40000d50 0x00000030>;
+			};
+
+			EMAC0: ethernet@40000800 {
+				unused = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-440gx", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000074>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000001>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+		 	EMAC1: ethernet@40000900 {
+				unused = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-440gx", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000074>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000001>;
+ 				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+
+		 	EMAC2: ethernet@40000c00 {
+				device_type = "network";
+				compatible = "ibm,emac-440gx", "ibm,emac4";
+				interrupt-parent = <&UIC2>;
+				interrupts = <0x0 0x4 0x1 0x4>;
+				reg = <0x40000c00 0x00000074>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <2>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-address = <1>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+ 				zmii-device = <&ZMII0>;
+				zmii-channel = <2>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+			};
+
+		 	EMAC3: ethernet@40000e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440gx", "ibm,emac4";
+				interrupt-parent = <&UIC2>;
+				interrupts = <0x2 0x4 0x3 0x4>;
+				reg = <0x40000e00 0x00000074>;
+				local-mac-address = [000000000000]; // Filled in by zImage
+				mal-device = <&MAL0>;
+				mal-tx-channel = <3>;
+				mal-rx-channel = <3>;
+				cell-index = <3>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-address = <3>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+ 				zmii-device = <&ZMII0>;
+				zmii-channel = <3>;
+				tah-device = <&TAH1>;
+				tah-channel = <0>;
+			};
+
+
+			GPT0: gpt@40000a00 {
+				/* FIXME */
+				reg = <0x40000a00 0x000000d4>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
+			};
+
+		};
+
+		PCIX0: pci@20ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x00000002 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000   0x00000004   /* Special cycles */
+			       0x00000002 0x0ec80000 0x00000100	/* Internal registers */
+			       0x00000002 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 1 */
+				0x800 0x0 0x0 0x1 &UIC0 0x17 0x8
+				0x800 0x0 0x0 0x2 &UIC0 0x18 0x8
+				0x800 0x0 0x0 0x3 &UIC0 0x19 0x8
+				0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8
+
+				/* IDSEL 2 */
+				0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8
+				0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8
+				0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8
+				0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8
+			>;
+		};
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@40000300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
new file mode 100644
index 000000000..372177b19
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TQM5200 board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm5200";
+	compatible = "tqc,tqm5200";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		serial@2000 {		// PSC1
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		serial@2200 {		// PSC2
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		serial@2400 {		// PSC3
+			compatible = "fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+
+			 rtc@68 {
+				compatible = "dallas,ds1307";
+				reg = <0x68>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+				 0xc000 0 0 2 &mpc5200_pic 0 0 3
+				 0xc000 0 0 3 &mpc5200_pic 0 0 3
+				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>,
+			 <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
+			 <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
new file mode 100644
index 000000000..eb4d8fd3f
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TQM 8540 Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e500v1_power_isa.dtsi"
+
+/ {
+	model = "tqc,tqm8540";
+	compatible = "tqc,tqm8540";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8540@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8540-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8540-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "FEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <41 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8540-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <0x0 0x0 0xfe000000 0x02000000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00180000>;
+			};
+			partition@180000 {
+				label = "root";
+				reg = <0x00180000 0x01dc0000>;
+			};
+			partition@1f40000 {
+				label = "env1";
+				reg = <0x01f40000 0x00040000>;
+			};
+			partition@1f80000 {
+				label = "env2";
+				reg = <0x01f80000 0x00040000>;
+			};
+			partition@1fc0000 {
+				label = "u-boot";
+				reg = <0x01fc0000 0x00040000>;
+				read-only;
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
new file mode 100644
index 000000000..fe5d3d873
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TQM 8541 Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e500v1_power_isa.dtsi"
+
+/ {
+	model = "tqc,tqm8541";
+	compatible = "tqc,tqm8541";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8541@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8541-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8541-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-cpm", "fsl,cpm2", "simple-bus";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x2000 0x9000 0x1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8541-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
new file mode 100644
index 000000000..caa36c5ef
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc@a0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xa0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <4>;
+				};
+				phy5: ethernet-phy@5 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <5>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy4>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy5>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@a0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xa0005000 0x100>;	// BRx, ORx, etc.
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xa3000000 0x00008000	// CAN (2 x CC770)
+			3 0x0 0xa3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can@2,0 {
+			compatible = "bosch,cc770"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+			bosch,clock-out-frequency = <16000000>;
+		};
+
+		can@2,100 {
+			compatible = "bosch,cc770"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			/* Micron MT29F8G08FAB multi-chip device */
+			fsl,upm-addr-line-cs-offsets = <0x0 0x200>;
+			fsl,upm-wait-flags = <0x5>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x10000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@a0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xa0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xa2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@a000a000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xb0000000 0xb0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xaf000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xa000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xb0000000 0x02000000 0
+			          0xb0000000 0 0x10000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
new file mode 100644
index 000000000..12a64410f
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <4>;
+				};
+				phy5: ethernet-phy@5 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <5>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy4>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy5>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@e0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x CC770)
+			3 0x0 0xe3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can@2,0 {
+			compatible = "bosch,cc770"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+			bosch,clock-out-frequency = <16000000>;
+		};
+
+		can@2,100 {
+			compatible = "bosch,cc770"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			/* Micron MT29F8G08FAB multi-chip device */
+			fsl,upm-addr-line-cs-offsets = <0x0 0x200>;
+			fsl,upm-wait-flags = <0x5>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x10000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@e000a000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xef000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xc0000000 0x02000000 0
+			          0xc0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
new file mode 100644
index 000000000..4be05b7d2
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TQM 8555 Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e500v1_power_isa.dtsi"
+
+/ {
+	model = "tqc,tqm8555";
+	compatible = "tqc,tqm8555";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8555@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8555-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-cpm", "fsl,cpm2", "simple-bus";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x2000 0x9000 0x1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8555-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
new file mode 100644
index 000000000..8ea485024
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TQM 8560 Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@grandegger.com>
+ */
+
+/dts-v1/;
+
+/include/ "fsl/e500v1_power_isa.dtsi"
+
+/ {
+	model = "tqc,tqm8560";
+	compatible = "tqc,tqm8560";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8560@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8560-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <3>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0 0x4000 0x9000 0x2000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8560-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+			};
+
+			serial0: serial@91a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x91a00 0x20 0x88000 0x100>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x800000>;
+				current-speed = <115200>;
+				interrupts = <40 8>;
+				interrupt-parent = <&cpmpic>;
+			};
+
+			serial1: serial@91a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+				             "fsl,cpm2-scc-uart";
+				reg = <0x91a20 0x20 0x88100 0x100>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x4a00000>;
+				current-speed = <115200>;
+				interrupts = <41 8>;
+				interrupt-parent = <&cpmpic>;
+			};
+
+			enet2: ethernet@91340 {
+				device_type = "network";
+				compatible = "fsl,mpc8560-fcc-enet",
+				             "fsl,cpm2-fcc-enet";
+				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				fsl,cpm-command = <0x1a400300>;
+				interrupts = <34 8>;
+				interrupt-parent = <&cpmpic>;
+				phy-handle = <&phy3>;
+			};
+		};
+	};
+
+	localbus@e0005000 {
+		compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 1>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	pci0: pci@e0008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts
new file mode 100644
index 000000000..d16cdfd81
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8xx.dts
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TQM8XX Device Tree Source
+ *
+ * Heiko Schocher <hs@denx.de>
+ * 2010 DENX Software Engineering GmbH
+ */
+
+/dts-v1/;
+
+/ {
+	model = "TQM8xx";
+	compatible = "tqc,tqm8xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		mdio1 = &phy1;
+		serial0 = &smc1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,860@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <16>;	// 16 bytes
+			i-cache-line-size = <16>;	// 16 bytes
+			d-cache-size = <0x1000>;		// L1, 4K
+			i-cache-size = <0x1000>;		// L1, 4K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	localbus@fff00100 {
+		compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xfff00100 0x40>;
+
+		ranges = <
+			0x0 0x0 0x40000000 0x800000
+			0x3 0x0 0xc0000000 0x200
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <4>;
+			device-width = <2>;
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can@3,0 {
+			compatible = "intc,82527";
+			reg = <3 0x0 0x80>;
+			interrupts = <8 1>;
+			interrupt-parent = <&PIC>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+			bosch,clock-out-frequency = <16000000>;
+		};
+
+		can@3,100 {
+			compatible = "intc,82527";
+			reg = <3 0x100 0x80>;
+			interrupts = <8 1>;
+			interrupt-parent = <&PIC>;
+			bosch,external-clock-frequency = <16000000>;
+			bosch,disconnect-rx1-input;
+			bosch,disconnect-tx1-output;
+			bosch,iso-low-speed-mux;
+		};
+	};
+
+	soc@fff00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xfff00000 0x00004000>;
+
+		phy1: mdio@e00 {
+			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			PHY: ethernet-phy@f {
+				reg = <0xf>;
+			};
+		};
+
+		eth1: ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc866-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY>;
+			linux,network-index = <1>;
+		};
+
+		PIC: pic@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x24>;
+			compatible = "fsl,mpc860-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc860-cpm", "fsl,cpm1";
+			ranges;
+			reg = <0x9c0 0x40>;
+			brg-frequency = <0>;
+			interrupts = <0 2>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc860-brg",
+					     "fsl,cpm1-brg",
+					     "fsl,cpm-brg";
+				reg = <0x9f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			CPM_PIC: pic@930 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc860-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+
+			smc1: serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc860-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x90>;
+			};
+
+			eth0: ethernet@a00 {
+				device_type = "network";
+				compatible = "fsl,mpc860-scc-enet",
+				             "fsl,cpm1-scc-enet";
+				reg = <0xa00 0x18 0x3c00 0x100>;
+				interrupts = <30>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0000>;
+				linux,network-index = <0>;
+				fixed-link = <0 0 10 0 0>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/turris1x.dts b/arch/powerpc/boot/dts/turris1x.dts
new file mode 100644
index 000000000..dff1ea074
--- /dev/null
+++ b/arch/powerpc/boot/dts/turris1x.dts
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Turris 1.x Device Tree Source
+ *
+ * Copyright 2013 - 2022 CZ.NIC z.s.p.o. (http://www.nic.cz/)
+ *
+ * Pinout, Schematics and Altium hardware design files are open source
+ * and available at: https://docs.turris.cz/hw/turris-1x/turris-1x/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+	model = "Turris 1.x";
+	compatible = "cznic,turris1x";
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x00100000>;
+
+		i2c@3000 {
+			/* PCA9557PW GPIO controller for boot config */
+			gpio-controller@18 {
+				compatible = "nxp,pca9557";
+				label = "bootcfg";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* STM32F030R8T6 MCU for power control */
+			power-control@2a {
+				/*
+				 * Turris Power Control firmware runs on STM32F0 MCU.
+				 * This firmware is open source and available at:
+				 * https://gitlab.nic.cz/turris/hw/turris_power_control
+				 */
+				reg = <0x2a>;
+			};
+
+			/* DDR3 SPD/EEPROM PSWP instruction */
+			eeprom@32 {
+				reg = <0x32>;
+			};
+
+			/* SA56004ED temperature control */
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>, /* GPIO12 - ALERT pin */
+					     <13 IRQ_TYPE_LEVEL_LOW>; /* GPIO13 - CRIT pin */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* Local temperature sensor (SA56004ED internal) */
+				channel@0 {
+					reg = <0>;
+					label = "board";
+				};
+
+				/* Remote temperature sensor (D+/D- connected to P2020 CPU Temperature Diode) */
+				channel@1 {
+					reg = <1>;
+					label = "cpu";
+				};
+			};
+
+			/* DDR3 SPD/EEPROM */
+			eeprom@52 {
+				compatible = "atmel,spd";
+				reg = <0x52>;
+			};
+
+			/* MCP79402-I/ST Protected EEPROM */
+			eeprom@57 {
+				reg = <0x57>;
+			};
+
+			/* ATSHA204-TH-DA-T crypto module */
+			crypto@64 {
+				compatible = "atmel,atsha204";
+				reg = <0x64>;
+			};
+
+			/* IDT6V49205BNLGI clock generator */
+			clock-generator@69 {
+				compatible = "idt,6v49205b";
+				reg = <0x69>;
+			};
+
+			/* MCP79402-I/ST RTC */
+			rtc@6f {
+				compatible = "microchip,mcp7940x";
+				reg = <0x6f>;
+				interrupt-parent = <&gpio>;
+				interrupts = <14 0>; /* GPIO14 - MFP pin */
+			};
+		};
+
+		/* SPI on connector P1 */
+		spi0: spi@7000 {
+		};
+
+		gpio: gpio-controller@fc00 {
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		/* Connected to SMSC USB2412-DZK 2-Port USB 2.0 Hub Controller */
+		usb@22000 {
+			phy_type = "ulpi";
+			dr_mode = "host";
+		};
+
+		enet0: ethernet@24000 {
+			/* Connected to port 6 of QCA8337N-AL3C switch */
+			phy-connection-type = "rgmii-id";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		mdio@24520 {
+			/* KSZ9031RNXCA ethernet phy for WAN port */
+			phy: ethernet-phy@7 {
+				interrupts = <3 1 0 0>;
+				reg = <0x7>;
+			};
+
+			/* QCA8337N-AL3C switch with integrated ethernet PHYs for LAN ports */
+			switch@10 {
+				compatible = "qca,qca8337";
+				interrupts = <2 1 0 0>;
+				reg = <0x10>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "cpu";
+						ethernet = <&enet1>;
+						phy-mode = "rgmii-id";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan5";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan4";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan3";
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan2";
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan1";
+					};
+
+					port@6 {
+						reg = <6>;
+						label = "cpu";
+						ethernet = <&enet0>;
+						phy-mode = "rgmii-id";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+
+		ptp_clock@24e00 {
+			fsl,tclk-period = <5>;
+			fsl,tmr-prsc = <200>;
+			fsl,tmr-add = <0xcccccccd>;
+			fsl,tmr-fiper1 = <0x3b9ac9fb>;
+			fsl,tmr-fiper2 = <0x0001869b>;
+			fsl,max-adj = <249999999>;
+		};
+
+		enet1: ethernet@25000 {
+			/* Connected to port 0 of QCA8337N-AL3C switch */
+			phy-connection-type = "rgmii-id";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@26000 {
+			/* Connected to KSZ9031RNXCA ethernet phy (WAN port) */
+			label = "wan";
+			phy-handle = <&phy>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		sdhc@2e000 {
+			bus-width = <4>;
+			cd-gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000>, /* NOR */
+			 <0x1 0x0 0x0 0xff800000 0x00040000>, /* NAND */
+			 <0x3 0x0 0x0 0xffa00000 0x00020000>; /* CPLD */
+
+		/* S29GL128P90TFIR10 NOR */
+		nor@0,0 {
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x01000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					/* 128 kB for Device Tree Blob */
+					reg = <0x00000000 0x00020000>;
+					label = "dtb";
+				};
+
+				partition@20000 {
+					/* 1.7 MB for Linux Kernel Image */
+					reg = <0x00020000 0x001a0000>;
+					label = "kernel";
+				};
+
+				partition@1c0000 {
+					/* 1.5 MB for Rescue JFFS2 Root File System */
+					reg = <0x001c0000 0x00180000>;
+					label = "rescue";
+				};
+
+				partition@340000 {
+					/* 11 MB for TAR.XZ Archive with Factory content of NAND Root File System */
+					reg = <0x00340000 0x00b00000>;
+					label = "factory";
+				};
+
+				partition@e40000 {
+					/* 768 kB for Certificates JFFS2 File System */
+					reg = <0x00e40000 0x000c0000>;
+					label = "certificates";
+				};
+
+				/* free unused space 0x00f00000-0x00f20000 */
+
+				partition@f20000 {
+					/* 128 kB for U-Boot Environment Variables */
+					reg = <0x00f20000 0x00020000>;
+					label = "u-boot-env";
+				};
+
+				partition@f40000 {
+					/* 768 kB for U-Boot Bootloader Image */
+					reg = <0x00f40000 0x000c0000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		/* MT29F2G08ABAEAWP:E NAND */
+		nand@1,0 {
+			compatible = "fsl,p2020-fcm-nand", "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x00040000>;
+			nand-ecc-mode = "soft";
+			nand-ecc-algo = "bch";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					/* 256 MB for UBI with one volume: UBIFS Root File System */
+					reg = <0x00000000 0x10000000>;
+					label = "rootfs";
+				};
+			};
+		};
+
+		/* LCMXO1200C-3FTN256C FPGA */
+		cpld@3,0 {
+			/*
+			 * Turris CPLD firmware which runs on this Lattice FPGA,
+			 * is extended version of P1021RDB-PC CPLD v4.1 firmware.
+			 * It is backward compatible with its original version
+			 * and the only extension is support for Turris LEDs.
+			 * Turris CPLD firmware is open source and available at:
+			 * https://gitlab.nic.cz/turris/hw/turris_cpld/-/blob/master/CZ_NIC_Router_CPLD.v
+			 */
+			compatible = "cznic,turris1x-cpld", "fsl,p1021rdb-pc-cpld", "simple-bus", "syscon";
+			reg = <0x3 0x0 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3 0x0 0x00020000>;
+
+			/* MAX6370KA+T watchdog */
+			watchdog@2 {
+				/*
+				 * CPLD firmware maps SET0, SET1 and SET2
+				 * input logic of MAX6370KA+T chip to CPLD
+				 * memory space at byte offset 0x2. WDI
+				 * input logic is outside of the CPLD and
+				 * connected via external GPIO.
+				 */
+				compatible = "maxim,max6370";
+				reg = <0x02 0x01>;
+				gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			};
+
+			reboot@d {
+				/*
+				 * CPLD firmware which manages system reset and
+				 * watchdog registers has bugs. It does not
+				 * autoclear system reset register after change
+				 * and watchdog ignores reset line on immediate
+				 * succeeding reset cycle triggered by watchdog.
+				 * These bugs have to be workarounded in U-Boot
+				 * bootloader. So use system reset via syscon as
+				 * a last resort because older U-Boot versions
+				 * do not have workaround for watchdog.
+				 *
+				 * Reset method via rstcr's global-utilities
+				 * (the preferred one) has priority level 128,
+				 * watchdog has priority level 0 and default
+				 * syscon-reboot priority level is 192.
+				 *
+				 * So define syscon-reboot with custom priority
+				 * level 64 (between rstcr and watchdog) because
+				 * rstcr should stay as default preferred reset
+				 * method and reset via watchdog is more broken
+				 * than system reset via syscon.
+				 */
+				compatible = "syscon-reboot";
+				reg = <0x0d 0x01>;
+				offset = <0x0d>;
+				mask = <0x01>;
+				value = <0x01>;
+				priority = <64>;
+			};
+
+			led-controller@13 {
+				/*
+				 * LEDs are controlled by CPLD firmware.
+				 * All five LAN LEDs share common RGB settings
+				 * and so it is not possible to set different
+				 * colors on different LAN ports.
+				 */
+				compatible = "cznic,turris1x-leds";
+				reg = <0x13 0x1d>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				multi-led@0 {
+					reg = <0x0>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WAN;
+				};
+
+				multi-led@1 {
+					reg = <0x1>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <5>;
+				};
+
+				multi-led@2 {
+					reg = <0x2>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <4>;
+				};
+
+				multi-led@3 {
+					reg = <0x3>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <3>;
+				};
+
+				multi-led@4 {
+					reg = <0x4>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <2>;
+				};
+
+				multi-led@5 {
+					reg = <0x5>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <1>;
+				};
+
+				multi-led@6 {
+					reg = <0x6>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WLAN;
+				};
+
+				multi-led@7 {
+					reg = <0x7>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_POWER;
+				};
+			};
+		};
+	};
+
+	pci2: pcie@ffe08000 {
+		/*
+		 * PCIe bus for on-board TUSB7340RKM USB 3.0 xHCI controller.
+		 * This xHCI controller is available only on Turris 1.1 boards.
+		 * Turris 1.0 boards have nothing connected to this PCIe bus,
+		 * so system would see only PCIe Root Port of this PCIe Root
+		 * Complex. TUSB7340RKM xHCI controller has four SuperSpeed
+		 * channels. Channel 0 is connected to the front USB 3.0 port,
+		 * channel 1 (but only USB 2.0 subset) to USB 2.0 pins on mPCIe
+		 * slot 1 (CN5), channels 2 and 3 to connector P600.
+		 *
+		 * P2020 PCIe Root Port does not use PCIe MEM and xHCI controller
+		 * uses 64kB + 8kB of PCIe MEM. No PCIe IO is used or required.
+		 * So allocate 128kB of PCIe MEM for this PCIe bus.
+		 */
+		reg = <0 0xffe08000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xc0000000 0 0xc0000000 0x0 0x00020000>, /* MEM */
+			 <0x01000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; /* IO */
+
+		pcie@0 {
+			ranges;
+		};
+	};
+
+	pci1: pcie@ffe09000 {
+		/* PCIe bus on mPCIe slot 2 (CN6) for expansion mPCIe card */
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000>, /* MEM */
+			 <0x01000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>; /* IO */
+
+		pcie@0 {
+			ranges;
+		};
+	};
+
+	pci0: pcie@ffe0a000 {
+		/*
+		 * PCIe bus on mPCIe slot 1 (CN5) for expansion mPCIe card.
+		 * Turris 1.1 boards have in this mPCIe slot additional USB 2.0
+		 * pins via channel 1 of TUSB7340RKM xHCI controller and also
+		 * additional SIM card slot, both for USB-based WWAN cards.
+		 */
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000>, /* MEM */
+			 <0x01000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>; /* IO */
+
+		pcie@0 {
+			ranges;
+		};
+	};
+};
+
+/include/ "fsl/p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
new file mode 100644
index 000000000..2e34d0191
--- /dev/null
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Manroland uc101 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
+/ {
+	model = "manroland,uc101";
+	compatible = "manroland,uc101";
+
+	soc5200@f0000000 {
+		rtc@800 {
+			status = "disabled";
+		};
+
+		can@900 {
+			status = "disabled";
+		};
+
+		can@980 {
+			status = "disabled";
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		usb@1000 {
+			status = "disabled";
+		};
+
+		psc@2000 {	// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2200 {	// PSC2
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		psc@2400 {	// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {	// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {	// PSC5
+			status = "disabled";
+		};
+
+		psc@2c00 {	// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@0 {
+				compatible = "intel,lxt971";
+				reg = <0>;
+			};
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			fsl,preserve-clocking;
+			clock-frequency = <400000>;
+
+			hwmon@2c {
+				compatible = "ad,adm9240";
+				reg = <0x2c>;
+			};
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	pci@f0000d00 {
+		status = "disabled";
+	};
+
+	localbus {
+		ranges = <0 0 0xff800000 0x00800000
+			  1 0 0x80000000 0x00800000
+			  3 0 0x80000000 0x00800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "DTS";
+				reg = <0x0 0x00100000>;
+			};
+			partition@100000 {
+				label = "Kernel";
+				reg = <0x100000 0x00200000>;
+			};
+			partition@300000 {
+				label = "RootFS";
+				reg = <0x00300000 0x00200000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x00200000>;
+			};
+			partition@700000 {
+				label = "U-Boot";
+				reg = <0x00700000 0x00040000>;
+			};
+			partition@740000 {
+				label = "Env";
+				reg = <0x00740000 0x00010000>;
+			};
+			partition@750000 {
+				label = "red. Env";
+				reg = <0x00750000 0x00010000>;
+			};
+			partition@760000 {
+				label = "reserve";
+				reg = <0x00760000 0x000a0000>;
+			};
+		};
+
+	};
+};
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
new file mode 100644
index 000000000..aa62d08e9
--- /dev/null
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -0,0 +1,307 @@
+/*
+ * Device Tree Source for PIKA Warp
+ *
+ * Copyright (c) 2008-2009 PIKA Technologies
+ *   Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "pika,warp";
+	compatible = "pika,warp";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <0x7 0x4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				fpga@2,0 {
+					compatible = "pika,fpga";
+			   		reg = <0x00000002 0x00000000 0x00001000>;
+					interrupts = <0x18 0x8>;
+					interrupt-parent = <&UIC0>;
+				};
+
+				fpga@2,2000 {
+					compatible = "pika,fpga-sgl";
+			   		reg = <0x00000002 0x00002000 0x00000200>;
+				};
+
+				fpga@2,4000 {
+					compatible = "pika,fpga-sd";
+					reg = <0x00000002 0x00004000 0x00004000>;
+				};
+
+				nor@0,0 {
+					compatible = "amd,s29gl032a", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x00400000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "splash";
+						reg = <0x00000000 0x00010000>;
+					};
+					partition@300000 {
+						label = "fpga";
+						reg = <0x0300000 0x00040000>;
+					};
+					partition@340000 {
+						label = "env";
+						reg = <0x0340000 0x00040000>;
+					};
+					partition@380000 {
+						label = "u-boot";
+						reg = <0x0380000 0x00080000>;
+					};
+				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000001 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "kernel";
+							reg = <0x00000000 0x00200000>;
+						};
+						partition@200000 {
+							label = "root";
+							reg = <0x00200000 0x03E00000>;
+						};
+						partition@40000000 {
+							label = "persistent";
+							reg = <0x04000000 0x04000000>;
+						};
+						partition@80000000 {
+							label = "persistent1";
+							reg = <0x08000000 0x04000000>;
+						};
+						partition@C0000000 {
+							label = "persistent2";
+							reg = <0x0C000000 0x04000000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <115200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0x0 0x4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ad7414@4a {
+					compatible = "adi,ad7414";
+					reg = <0x4a>;
+					interrupts = <0x19 0x8>;
+					interrupt-parent = <&UIC0>;
+				};
+
+				/* This will create 52 and 53 */
+				at24@52 {
+					compatible = "atmel,24c04";
+					reg = <0x52>;
+				};
+			};
+
+			GPIO0: gpio@ef600b00 {
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600b00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			GPIO1: gpio@ef600c00 {
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600c00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			power-leds {
+				compatible = "warp-power-leds";
+				green {
+					gpios = <&GPIO1 0 0>;
+				};
+				red {
+					gpios = <&GPIO1 1 0>;
+				};
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
+				interrupt-parent = < &UIC1 >;
+			};
+		};
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts
new file mode 100644
index 000000000..473d9feb9
--- /dev/null
+++ b/arch/powerpc/boot/dts/wii.dts
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/powerpc/boot/dts/wii.dts
+ *
+ * Nintendo Wii platform device tree source
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/*
+ * This is commented-out for now.
+ * Until a later patch is merged, the kernel can use only the first
+ * contiguous RAM range and will BUG() if the memreserve is outside
+ * that range.
+ */
+/*/memreserve/ 0x10000000 0x0004000;*/	/* DSP RAM */
+
+/ {
+	model = "nintendo,wii";
+	compatible = "nintendo,wii";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rootwait udbg-immortal";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x01800000	/* MEM1 24MB 1T-SRAM */
+		       0x10000000 0x04000000>;	/* MEM2 64MB GDDR3 */
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,broadway@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <729000000>; /* 729MHz */
+			bus-frequency = <243000000>; /* 243MHz core-to-bus 3x */
+			timebase-frequency = <60750000>; /* 243MHz / 4 */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+		};
+	};
+
+	/* devices contained in the hollywood chipset */
+	hollywood {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "nintendo,hollywood";
+                ranges = <0x0c000000 0x0c000000 0x01000000
+			  0x0d000000 0x0d000000 0x00800000
+			  0x0d800000 0x0d800000 0x00800000>;
+		interrupt-parent = <&PIC0>;
+
+		video@c002000 {
+			compatible = "nintendo,hollywood-vi",
+					"nintendo,flipper-vi";
+			reg = <0x0c002000 0x100>;
+			interrupts = <8>;
+		};
+
+		processor-interface@c003000 {
+			compatible = "nintendo,hollywood-pi",
+					"nintendo,flipper-pi";
+			reg = <0x0c003000 0x100>;
+
+			PIC0: pic0 {
+				#interrupt-cells = <1>;
+				compatible = "nintendo,flipper-pic";
+				interrupt-controller;
+			};
+		};
+
+		dsp@c005000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "nintendo,hollywood-dsp",
+					"nintendo,flipper-dsp";
+			reg = <0x0c005000 0x200>;
+			interrupts = <6>;
+		};
+
+		gamepad-controller@d006400 {
+			compatible = "nintendo,hollywood-si",
+					"nintendo,flipper-si";
+			reg = <0x0d006400 0x100>;
+			interrupts = <3>;
+		};
+
+		audio@c006c00 {
+			compatible = "nintendo,hollywood-ai",
+					"nintendo,flipper-ai";
+			reg = <0x0d006c00 0x20>;
+			interrupts = <6>;
+		};
+
+		/* External Interface bus */
+		exi@d006800 {
+			compatible = "nintendo,hollywood-exi",
+					"nintendo,flipper-exi";
+			reg = <0x0d006800 0x40>;
+			virtual-reg = <0x0d006800>;
+			interrupts = <4>;
+		};
+
+		usb@d040000 {
+			compatible = "nintendo,hollywood-usb-ehci",
+					"usb-ehci";
+			reg = <0x0d040000 0x100>;
+			interrupts = <4>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		usb@d050000 {
+			compatible = "nintendo,hollywood-usb-ohci",
+					"usb-ohci";
+			reg = <0x0d050000 0x100>;
+			interrupts = <5>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		usb@d060000 {
+			compatible = "nintendo,hollywood-usb-ohci",
+					"usb-ohci";
+			reg = <0x0d060000 0x100>;
+			interrupts = <6>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		sd@d070000 {
+			compatible = "nintendo,hollywood-sdhci",
+					"sdhci";
+			reg = <0x0d070000 0x200>;
+			interrupts = <7>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		sdio@d080000 {
+			compatible = "nintendo,hollywood-sdhci",
+					"sdhci";
+			reg = <0x0d080000 0x200>;
+			interrupts = <8>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		ipc@d000000 {
+			compatible = "nintendo,hollywood-ipc";
+			reg = <0x0d000000 0x10>;
+			interrupts = <30>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		PIC1: pic1@d800030 {
+			#interrupt-cells = <1>;
+			compatible = "nintendo,hollywood-pic";
+			reg = <0x0d800030 0x10>;
+			interrupt-controller;
+			interrupts = <14>;
+		};
+
+		srnprot@d800060 {
+			compatible = "nintendo,hollywood-srnprot";
+			reg = <0x0d800060 0x4>;
+		};
+
+		GPIO: gpio@d8000c0 {
+			#gpio-cells = <2>;
+			compatible = "nintendo,hollywood-gpio";
+			reg = <0x0d8000c0 0x40>;
+			gpio-controller;
+			ngpios = <24>;
+
+			gpio-line-names =
+				"POWER", "SHUTDOWN", "FAN", "DC_DC",
+				"DI_SPIN", "SLOT_LED", "EJECT_BTN", "SLOT_IN",
+				"SENSOR_BAR", "DO_EJECT", "EEP_CS", "EEP_CLK",
+				"EEP_MOSI", "EEP_MISO", "AVE_SCL", "AVE_SDA",
+				"DEBUG0", "DEBUG1", "DEBUG2", "DEBUG3",
+				"DEBUG4", "DEBUG5", "DEBUG6", "DEBUG7";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <10>;
+			interrupt-parent = <&PIC1>;
+
+			/*
+			 * This is commented out while a standard binding
+			 * for i2c over gpio is defined.
+			 */
+			/*
+			i2c-video {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			        compatible = "i2c-gpio";
+
+			        gpios = <&GPIO 15 0
+			                 &GPIO 14 0>;
+			        clock-frequency = <250000>;
+				no-clock-stretching;
+			        scl-is-open-drain;
+			        sda-is-open-drain;
+			        sda-enforce-dir;
+
+			        AVE: audio-video-encoder@70 {
+			                compatible = "nintendo,wii-audio-video-encoder";
+			                reg = <0x70>;
+			        };
+			};
+			*/
+		};
+
+		control@d800100 {
+			compatible = "nintendo,hollywood-control";
+			/*
+			 * Both the address and length are wrong, according to
+			 * Wiibrew this should be <0x0d800000 0x400>, but it
+			 * requires refactoring the PIC1, GPIO and OTP nodes
+			 * before changing that.
+			 */
+			reg = <0x0d800100 0xa0>;
+		};
+
+		otp@d8001ec {
+			compatible = "nintendo,hollywood-otp";
+			reg = <0x0d8001ec 0x8>;
+		};
+
+		disk@d806000 {
+			compatible = "nintendo,hollywood-di";
+			reg = <0x0d806000 0x40>;
+			interrupts = <2>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		/* This is the blue LED in the disk drive slot */
+		led-0 {
+			label = "wii:blue:drive_slot";
+			gpios = <&GPIO 5 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			label = "Power Button";
+			gpios = <&GPIO 0 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+		};
+
+		button-eject {
+			label = "Eject Button";
+			gpios = <&GPIO 6 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_EJECTCD>;
+		};
+	};
+};
+
diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts
new file mode 100644
index 000000000..46c25bda9
--- /dev/null
+++ b/arch/powerpc/boot/dts/xcalibur1501.dts
@@ -0,0 +1,693 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XCalibur1501 6U CompactPCI single-board computer based on MPC8572E
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xcalibur1501";
+	compatible = "xes,xcalibur1501", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000  /* CS0: Flash 1 */
+			  1 0 0 0xf0000000 0x8000000  /* CS1: Flash 2 */
+			  2 0 0 0xef800000 0x40000    /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000    /* CS3: NAND CE2 */
+			  4 0 0 0xe9000000 0x100000>; /* CS4: USB */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+		usb@4,0 {
+			compatible = "nxp,usb-isp1761";
+			reg = <4 0 0x100000>;
+			bus-width = <32>;
+			interrupt-parent = <&mpic>;
+			interrupts = <10 1>;
+		};
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@6a {
+				compatible = "plx,pex8648";
+				reg = <0x6a>;
+			};
+
+			/* On-board signals for VID, flash, serial */
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* PMC0/XMC0 signals */
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* PMC1/XMC1 signals */
+			gpio3: gpio@1d {
+				compatible = "nxp,pca9557";
+				reg = <0x1d>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* CompactPCI signals (sysen, GA[4:0]) */
+			gpio4: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* CompactPCI J5 GPIO and FAL/DEG/PRST */
+			gpio5: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 front panel 0 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <4 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <4 1>;
+					reg = <0x2>;
+				};
+				phy2: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x3>;
+				};
+				phy3: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 front panel 1 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 3 PICMG2.16 backplane port 0 */
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 4 PICMG2.16 backplane port 1 */
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interrupts = <61 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interrupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/*
+	 * PCI Express controller 3 @ ef008000 is not used.
+	 * This would have been pci0 on other mpc85xx platforms.
+	 *
+	 * PCI Express controller 2 @ ef009000 is not used.
+	 * This would have been pci1 on other mpc85xx platforms.
+	 */
+
+	/* PCI Express controller 1, wired to PEX8648 PCIe switch */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts
new file mode 100644
index 000000000..74b346f2d
--- /dev/null
+++ b/arch/powerpc/boot/dts/xpedite5200.dts
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ * Based on TQM8548 device tree
+ *
+ * XPedite5200 PrPMC/XMC module based on MPC8548E
+ */
+
+/dts-v1/;
+
+/ {
+	model = "xes,xpedite5200";
+	compatible = "xes,xpedite5200", "xes,MPC8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	soc@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xef000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		/* On-card I2C */
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			/*
+			 * Board GPIO:
+			 * 	0: BRD_CFG0 (1: P14 IO present)
+			 * 	1: BRD_CFG1 (1: FP ethernet present)
+			 * 	2: BRD_CFG2 (1: XMC IO present)
+			 * 	3: XMC root complex indicator
+			 * 	4: Flash boot device indicator
+			 * 	5: Flash write protect enable
+			 * 	6: PMC monarch indicator
+			 * 	7: PMC EREADY
+			 */
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9556";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* P14 GPIO */
+			gpio2: gpio@19 {
+				compatible = "nxp,pca9556";
+				reg = <0x19>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,at24c16";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+					     "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			dtt@34 {
+				compatible = "maxim,max1237";
+				reg = <0x34>;
+			};
+		};
+
+		/* Off-card I2C */
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC1: Front panel port 0 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				phy2: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x3>;
+				};
+				phy3: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC2: Front panel port 1 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC3: Rear panel port 2 */
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC4: Rear panel port 3 */
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@ef005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xef005000 0x100>;	// BRx, ORx, etc.
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR boot flash
+			1 0x0 0xf8000000 0x04000000	// NOR expansion flash
+			2 0x0 0xef800000 0x00010000	// NAND CE1
+			3 0x0 0xef840000 0x00010000	// NAND CE2
+		>;
+
+		nor-boot@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Primary OS";
+				reg = <0x00000000 0x180000>;
+			};
+			partition@180000 {
+				label = "Secondary OS";
+				reg = <0x00180000 0x180000>;
+			};
+			partition@300000 {
+				label = "User";
+				reg = <0x00300000 0x3c80000>;
+			};
+			partition@3f80000 {
+				label = "Boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nor-alternate@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Filesystem";
+				reg = <0x00000000 0x3f80000>;
+			};
+			partition@3f80000 {
+				label = "Alternate boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xes,address-ctl-nand";
+			reg = <2 0x0 0x10000>;
+			cle-line = <0x8>;	/* CLE tied to A3 */
+			ale-line = <0x10>;	/* ALE tied to A4 */
+
+			/* U-Boot should fix this up */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+	};
+
+	/* PMC interface */
+	pci0: pci@ef008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xef008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x40000000
+			  0x01000000 0 0x00000000 0xe8000000 0 0x00800000>;
+	};
+
+	/* XMC PCIe is not yet enabled in U-Boot on XPedite5200 */
+};
diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
new file mode 100644
index 000000000..d491c7a8f
--- /dev/null
+++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ * Based on TQM8548 device tree
+ *
+ * XPedite5200 PrPMC/XMC module based on MPC8548E.  This dts is for the
+ * xMon boot loader memory map which differs from U-Boot's.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "xes,xpedite5200";
+	compatible = "xes,xpedite5200", "xes,MPC8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	form-factor = "PMC/XMC";
+	boot-bank = <0x0>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0>;	// Filled in by boot loader
+	};
+
+	soc@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xef000000 0x100000>;
+		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		/* On-card I2C */
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			/*
+			 * Board GPIO:
+			 * 	0: BRD_CFG0 (1: P14 IO present)
+			 * 	1: BRD_CFG1 (1: FP ethernet present)
+			 * 	2: BRD_CFG2 (1: XMC IO present)
+			 * 	3: XMC root complex indicator
+			 * 	4: Flash boot device indicator
+			 * 	5: Flash write protect enable
+			 * 	6: PMC monarch indicator
+			 * 	7: PMC EREADY
+			 */
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9556";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			/* P14 GPIO */
+			gpio2: gpio@19 {
+				compatible = "nxp,pca9556";
+				reg = <0x19>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,at24c16";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+					     "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			dtt@34 {
+				compatible = "maxim,max1237";
+				reg = <0x34>;
+			};
+		};
+
+		/* Off-card I2C */
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC1: Front panel port 0 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				phy2: ethernet-phy@3 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x3>;
+				};
+				phy3: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x4>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC2: Front panel port 1 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC3: Rear panel port 2 */
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC4: Rear panel port 3 */
+		enet3: ethernet@27000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			ranges = <0x0 0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi3: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			current-speed = <9600>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			current-speed = <9600>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@ef005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xef005000 0x100>;	// BRx, ORx, etc.
+		interrupt-parent = <&mpic>;
+		interrupts = <19 2>;
+
+		ranges = <
+			0 0x0 0xf8000000 0x08000000	// NOR boot flash
+			1 0x0 0xf0000000 0x08000000	// NOR expansion flash
+			2 0x0 0xe8000000 0x00010000	// NAND CE1
+			3 0x0 0xe8010000 0x00010000	// NAND CE2
+		>;
+
+		nor-boot@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Primary OS";
+				reg = <0x00000000 0x180000>;
+			};
+			partition@180000 {
+				label = "Secondary OS";
+				reg = <0x00180000 0x180000>;
+			};
+			partition@300000 {
+				label = "User";
+				reg = <0x00300000 0x3c80000>;
+			};
+			partition@3f80000 {
+				label = "Boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nor-alternate@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x4000000>;
+			bank-width = <2>;
+
+			partition@0 {
+				label = "Filesystem";
+				reg = <0x00000000 0x3f80000>;
+			};
+			partition@3f80000 {
+				label = "Alternate boot firmware";
+				reg = <0x03f80000 0x80000>;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xes,address-ctl-nand";
+			reg = <2 0x0 0x10000>;
+			cle-line = <0x8>;	/* CLE tied to A3 */
+			ale-line = <0x10>;	/* ALE tied to A4 */
+
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+	};
+
+	/* PMC interface */
+	pci0: pci@ef008000 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xef008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xd0000000 0 0x01000000>;
+	};
+
+	/* XMC PCIe */
+	pci1: pcie@ef00a000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xd1000000 0 0x01000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xef00a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xc0000000 0x02000000 0
+			          0xc0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+
+	/* Needed for dtbImage boot wrapper compatibility */
+	chosen {
+		stdout-path = &serial0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts
new file mode 100644
index 000000000..12184e179
--- /dev/null
+++ b/arch/powerpc/boot/dts/xpedite5301.dts
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XPedite5301 PMC/XMC module based on MPC8572E
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xpedite5301";
+	compatible = "xes,xpedite5301", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	form-factor = "PMC/XMC";
+	boot-bank = <0x0>;	/* 0: Primary flash, 1: Secondary flash */
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
+			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
+			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@70 {
+				compatible = "plx,pex8518";
+				reg = <0x70>;
+			};
+
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio3: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio4: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interrupts = <61 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interrupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/*
+	 * PCI Express controller 3 @ ef008000 is not used.
+	 * This would have been pci0 on other mpc85xx platforms.
+	 */
+
+	/* PCI Express controller 2, wired to XMC P15 connector */
+	pci1: pcie@ef009000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef009000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 1, wired to PEX8112 for PMC interface */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts
new file mode 100644
index 000000000..e8fc90c52
--- /dev/null
+++ b/arch/powerpc/boot/dts/xpedite5330.dts
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XPedite5330 3U CompactPCI module based on MPC8572E
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xpedite5330";
+	compatible = "xes,xpedite5330", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	form-factor = "3U CompactPCI";
+	boot-bank = <0x0>;	/* 0: Primary flash, 1: Secondary flash */
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	pmcslots {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmcslot@0 {
+			cell-index = <0>;
+			/*
+			 * boolean properties (true if defined):
+			 *     monarch;
+			 *     module-present;
+			 */
+		};
+	};
+
+	xmcslots {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		xmcslot@0 {
+			cell-index = <0>;
+			/*
+			 * boolean properties (true if defined):
+			 *     module-present;
+			 */
+		};
+	};
+
+	cpci {
+		/*
+		 * boolean properties (true if defined):
+		 *     system-controller;
+		 */
+		system-controller;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
+			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
+			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@70 {
+				compatible = "plx,pex8518";
+				reg = <0x70>;
+			};
+
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio3: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio4: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interrupts = <61 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interrupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/* PCI Express controller 3 - CompactPCI bus via PEX8112 bridge */
+	pci0: pcie@ef008000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef008000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe9000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xe0000000
+				  0x02000000 0x0 0xe0000000
+				  0x0 0x10000000
+
+				  0x01000000 0x0 0x0
+				  0x01000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 2, PMC module via PEX8112 bridge */
+	pci1: pcie@ef009000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef009000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 1, XMC P15 */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts
new file mode 100644
index 000000000..2b5aa2f3a
--- /dev/null
+++ b/arch/powerpc/boot/dts/xpedite5370.dts
@@ -0,0 +1,635 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
+ * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
+ *
+ * XPedite5370 3U VPX single-board computer based on MPC8572E
+ */
+
+/dts-v1/;
+/ {
+	model = "xes,xpedite5370";
+	compatible = "xes,xpedite5370", "xes,MPC8572";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8572@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,8572@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
+	};
+
+	localbus@ef005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xef005000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+		/* Local bus region mappings */
+		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
+			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
+			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
+			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
+
+		nor-boot@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			reg = <0 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Primary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Primary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Primary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Primary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Primary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nor-alternate@1,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			bank-width = <2>;
+			//reg = <0xf0000000 0x08000000>; /* 128MB */
+			reg = <1 0 0x8000000>; /* 128MB */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "Secondary user space";
+				reg = <0x00000000 0x6f00000>; /* 111 MB */
+			};
+			partition@6f00000 {
+				label = "Secondary kernel";
+				reg = <0x6f00000 0x1000000>; /* 16 MB */
+			};
+			partition@7f00000 {
+				label = "Secondary DTB";
+				reg = <0x7f00000 0x40000>; /* 256 KB */
+			};
+			partition@7f40000 {
+				label = "Secondary U-Boot environment";
+				reg = <0x7f40000 0x40000>; /* 256 KB */
+			};
+			partition@7f80000 {
+				label = "Secondary U-Boot";
+				reg = <0x7f80000 0x80000>; /* 512 KB */
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
+			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
+			 * MT29F16G08FAA (2x 1 GB), depending on the build
+			 * configuration
+			 */
+			compatible = "fsl,mpc8572-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <2 0 0x40000>;
+			/* U-Boot should fix this up if chip size > 1 GB */
+			partition@0 {
+				label = "NAND Filesystem";
+				reg = <0 0x40000000>;
+			};
+		};
+
+	};
+
+	soc8572@ef000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8572-immr", "simple-bus";
+		ranges = <0x0 0 0xef000000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		memory-controller@6000 {
+			compatible = "fsl,mpc8572-memory-controller";
+			reg = <0x6000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8572-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			temp-sensor@48 {
+				compatible = "dallas,ds1631", "dallas,ds1621";
+				reg = <0x48>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			cpu-supervisor@51 {
+				compatible = "dallas,ds4510";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,at24c128b";
+				reg = <0x54>;
+			};
+
+			rtc@68 {
+				compatible = "st,m41t00",
+				             "dallas,ds1338";
+				reg = <0x68>;
+			};
+
+			pcie-switch@70 {
+				compatible = "plx,pex8518";
+				reg = <0x70>;
+			};
+
+			gpio1: gpio@18 {
+				compatible = "nxp,pca9557";
+				reg = <0x18>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio2: gpio@1c {
+				compatible = "nxp,pca9557";
+				reg = <0x1c>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio3: gpio@1e {
+				compatible = "nxp,pca9557";
+				reg = <0x1e>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+
+			gpio4: gpio@1f {
+				compatible = "nxp,pca9557";
+				reg = <0x1f>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				polarity = <0x00>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		/* eTSEC 1 */
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x1>;
+				};
+				phy1: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <8 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* eTSEC 2 */
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		/* UART0 */
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* UART1 */
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8572-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		gpio0: gpio@f000 {
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x1000>;
+			interrupts = <47 2>;
+			interrupt-parent = <&mpic>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpio0 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&gpio0 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&gpio0 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&gpio0 7 1>;
+			};
+		};
+
+		/* PME (pattern-matcher) */
+		pme@10000 {
+			compatible = "fsl,mpc8572-pme", "pme8572";
+			reg = <0x10000 0x5000>;
+			interrupts = <57 2 64 2 65 2 66 2 67 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@2f000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x2f000 0x1000>;
+			interrupts = <61 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		tlu@15000 {
+			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
+			reg = <0x15000 0x1000>;
+			interrupts = <75 2>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	/*
+	 * PCI Express controller 3 @ ef008000 is not used.
+	 * This would have been pci0 on other mpc85xx platforms.
+	 */
+
+	/* PCI Express controller 2, wired to VPX P1,P2 backplane */
+	pci1: pcie@ef009000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef009000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	/* PCI Express controller 1, wired to PEX8518 PCIe switch */
+	pci2: pcie@ef00a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xef00a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
+			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
new file mode 100644
index 000000000..56508785c
--- /dev/null
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -0,0 +1,332 @@
+/*
+ * Device Tree Source for AMCC Yosemite
+ *
+ * Copyright 2008 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,yosemite";
+	compatible = "amcc,yosemite";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+			ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x7 0x4>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02540000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x03f40000 0x00040000>;
+					};
+					partition@3f80000 {
+						label = "u-boot";
+						reg = <0x03f80000 0x00080000>;
+					};
+				};
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART2: serial@ef600500 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				status = "disabled";
+			};
+
+			UART3: serial@ef600600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x4 0x4>;
+				status = "disabled";
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xef600700 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xef600800 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x7 0x4>;
+			};
+
+			spi@ef600900 {
+				compatible = "amcc,spi-440ep";
+				reg = <0xef600900 0x00000006>;
+				interrupts = <0x8 0x4>;
+				interrupt-parent = <&UIC0>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0x0000000c>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rmii";
+				phy-map = <0x00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x4 0x9 0x4>;
+				interrupt-parent = < &UIC1 >;
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
+			interrupt-map = <
+				/* IDSEL 12 */
+				0x6000 0x0 0x0 0x0 &UIC0 0x19 0x8
+			>;
+		};
+	};
+
+	chosen {
+		stdout-path = "/plb/opb/serial@ef600300";
+	};
+};