Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 143 insertions, 0 deletions

diff --git a/arch/powerpc/boot/decompress.c b/arch/powerpc/boot/decompress.c
new file mode 100644
index 000000000..6835cb53f
--- /dev/null
+++ b/arch/powerpc/boot/decompress.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Wrapper around the kernel's pre-boot decompression library.
+ *
+ * Copyright (C) IBM Corporation 2016.
+ */
+
+#include "elf.h"
+#include "page.h"
+#include "string.h"
+#include "stdio.h"
+#include "ops.h"
+#include "reg.h"
+#include "types.h"
+
+/*
+ * The decompressor_*.c files play #ifdef games so they can be used in both
+ * pre-boot and regular kernel code. We need these definitions to make the
+ * includes work.
+ */
+
+#define STATIC static
+#define INIT
+
+/*
+ * The build process will copy the required zlib source files and headers
+ * out of lib/ and "fix" the includes so they do not pull in other kernel
+ * headers.
+ */
+
+#ifdef CONFIG_KERNEL_GZIP
+#	include "decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_XZ
+#	include "xz_config.h"
+#	include "../../../lib/decompress_unxz.c"
+#endif
+
+/* globals for tracking the state of the decompression */
+static unsigned long decompressed_bytes;
+static unsigned long limit;
+static unsigned long skip;
+static char *output_buffer;
+
+/*
+ * flush() is called by __decompress() when the decompressor's scratch buffer is
+ * full.
+ */
+static long flush(void *v, unsigned long buffer_size)
+{
+	unsigned long end = decompressed_bytes + buffer_size;
+	unsigned long size = buffer_size;
+	unsigned long offset = 0;
+	char *in = v;
+	char *out;
+
+	/*
+	 * if we hit our decompression limit, we need to fake an error to abort
+	 * the in-progress decompression.
+	 */
+	if (decompressed_bytes >= limit)
+		return -1;
+
+	/* skip this entire block */
+	if (end <= skip) {
+		decompressed_bytes += buffer_size;
+		return buffer_size;
+	}
+
+	/* skip some data at the start, but keep the rest of the block */
+	if (decompressed_bytes < skip && end > skip) {
+		offset = skip - decompressed_bytes;
+
+		in += offset;
+		size -= offset;
+		decompressed_bytes += offset;
+	}
+
+	out = &output_buffer[decompressed_bytes - skip];
+	size = min(decompressed_bytes + size, limit) - decompressed_bytes;
+
+	memcpy(out, in, size);
+	decompressed_bytes += size;
+
+	return buffer_size;
+}
+
+static void print_err(char *s)
+{
+	/* suppress the "error" when we terminate the decompressor */
+	if (decompressed_bytes >= limit)
+		return;
+
+	printf("Decompression error: '%s'\n\r", s);
+}
+
+/**
+ * partial_decompress - decompresses part or all of a compressed buffer
+ * @inbuf:       input buffer
+ * @input_size:  length of the input buffer
+ * @outbuf:      output buffer
+ * @output_size: length of the output buffer
+ * @_skip:       number of output bytes to ignore
+ *
+ * This function takes compressed data from inbuf, decompresses and write it to
+ * outbuf. Once output_size bytes are written to the output buffer, or the
+ * stream is exhausted the function will return the number of bytes that were
+ * decompressed. Otherwise it will return whatever error code the decompressor
+ * reported (NB: This is specific to each decompressor type).
+ *
+ * The skip functionality is mainly there so the program and discover
+ * the size of the compressed image so that it can ask firmware (if present)
+ * for an appropriately sized buffer.
+ */
+long partial_decompress(void *inbuf, unsigned long input_size,
+	void *outbuf, unsigned long output_size, unsigned long _skip)
+{
+	int ret;
+
+	/*
+	 * The skipped bytes needs to be included in the size of data we want
+	 * to decompress.
+	 */
+	output_size += _skip;
+
+	decompressed_bytes = 0;
+	output_buffer = outbuf;
+	limit = output_size;
+	skip = _skip;
+
+	ret = __decompress(inbuf, input_size, NULL, flush, outbuf,
+		output_size, NULL, print_err);
+
+	/*
+	 * If decompression was aborted due to an actual error rather than
+	 * a fake error that we used to abort, then we should report it.
+	 */
+	if (decompressed_bytes < limit)
+		return ret;
+
+	return decompressed_bytes - skip;
+}