ata: libata-scsi: fix ata_dsm_trim_pages() kernel-docgrafted

make htmldocs fails with:

  Documentation/driver-api/libata:604: ./drivers/ata/libata-scsi.c:2301:
  ERROR: Unexpected indentation. [docutils]

The Return: section of ata_dsm_trim_pages() ends its first sentence with
a colon and continues with an indented bullet list. reStructuredText
requires a blank line before an indented block, so docutils chokes on
the list.

Simply adding the missing blank line does not work either: Return: is a
kernel-doc "special section", which is terminated by the first blank
line, so the bullet list would end up in the Description section,
detached from the sentence introducing it.

Spell the two bounds out as prose instead, so that the Return: section
stays self-contained. Documentation-only change.

Fixes: e64e6b5dc867 ("ata: libata-scsi: scale DSM TRIM payload by MAX PAGES PER DSM COMMAND")
Reported-by: Thomas Huth <thuth@redhat.com>
Closes: https://lore.kernel.org/linux-ide/b0a0b8e8-cc4f-4c7b-8bc5-fee0712d405a@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20260916130031.29990-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>

1 files changed, 499 insertions, 0 deletions

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
new file mode 100644
index 000000000..7ee0fa2d3
--- /dev/null
+++ b/arch/powerpc/boot/Makefile
@@ -0,0 +1,499 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for making ELF bootable images for booting on CHRP
+# using Open Firmware.
+#
+# Geert Uytterhoeven	September 1997
+#
+# Based on coffboot by Paul Mackerras
+# Simplified for ppc64 by Todd Inglett
+#
+# NOTE:	this code may be built for 32 bit in ELF32 format even though
+#	it packages a 64 bit kernel.  We do this to simplify the
+#	bootloader and increase compatibility with OpenFirmware.
+#
+#	To this end we need to define BOOTCC, etc, as the tools
+#	needed to build the 32 bit image.  That's normally the same
+#	compiler for the rest of the kernel, with the -m32 flag added.
+#	To make it easier to setup a cross compiler,
+#	CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
+#	in the toplevel makefile.
+
+all: $(obj)/zImage
+
+ifdef CROSS32_COMPILE
+ifdef CONFIG_CC_IS_CLANG
+    BOOTCC := $(CROSS32_COMPILE)clang
+else
+    BOOTCC := $(CROSS32_COMPILE)gcc
+endif
+    BOOTAR := $(CROSS32_COMPILE)ar
+else
+    BOOTCC := $(CC)
+    BOOTAR := $(AR)
+endif
+
+ifdef CONFIG_PPC64_BOOT_WRAPPER
+BOOTTARGETFLAGS	+= -m64
+BOOTTARGETFLAGS	+= -mabi=elfv2
+ifdef CONFIG_PPC64_ELF_ABI_V2
+BOOTTARGETFLAGS	+= $(call cc-option,-mabi=elfv2)
+endif
+else
+BOOTTARGETFLAGS	:= -m32
+endif
+
+ifdef CONFIG_TARGET_CPU_BOOL
+BOOTTARGETFLAGS	+= -mcpu=$(CONFIG_TARGET_CPU)
+else ifdef CONFIG_PPC64_BOOT_WRAPPER
+ifdef CONFIG_CPU_LITTLE_ENDIAN
+BOOTTARGETFLAGS	+= -mcpu=powerpc64le
+else
+BOOTTARGETFLAGS	+= -mcpu=powerpc64
+endif
+endif
+
+$(obj)/4xx.o: BOOTTARGETFLAGS += -mcpu=405
+$(obj)/ebony.o: BOOTTARGETFLAGS += -mcpu=440
+$(obj)/cuboot-taishan.o: BOOTTARGETFLAGS += -mcpu=440
+$(obj)/cuboot-katmai.o: BOOTTARGETFLAGS += -mcpu=440
+$(obj)/treeboot-iss4xx.o: BOOTTARGETFLAGS += -mcpu=405
+$(obj)/treeboot-currituck.o: BOOTTARGETFLAGS += -mcpu=405
+$(obj)/treeboot-akebono.o: BOOTTARGETFLAGS += -mcpu=405
+
+ifdef CONFIG_CPU_BIG_ENDIAN
+BOOTTARGETFLAGS	+= -mbig-endian
+else
+BOOTTARGETFLAGS	+= -mlittle-endian
+endif
+
+BOOTCPPFLAGS	:= -nostdinc $(LINUXINCLUDE)
+BOOTCPPFLAGS	+= -isystem $(shell $(BOOTCC) -print-file-name=include)
+
+BOOTCFLAGS	:= $(BOOTTARGETFLAGS) \
+		   $(CC_FLAGS_DIALECT) \
+		   -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
+		   -fno-strict-aliasing -O2 \
+		   -msoft-float -mno-altivec -mno-vsx \
+		   $(call cc-option,-mno-prefixed) \
+		   $(call cc-option,-mno-pcrel) \
+		   $(call cc-option,-mno-mma) \
+		   $(call cc-option,-mno-spe) $(call cc-option,-mspe=no) \
+		   -fomit-frame-pointer -fno-builtin -fPIC
+
+BOOTAFLAGS	:= $(BOOTTARGETFLAGS) -D__ASSEMBLY__
+
+BOOTARFLAGS	:= -crD
+
+ifdef CONFIG_CC_IS_CLANG
+BOOTCFLAGS += $(CLANG_FLAGS)
+BOOTAFLAGS += $(CLANG_FLAGS)
+endif
+
+ifdef CONFIG_DEBUG_INFO
+BOOTCFLAGS	+= -g
+endif
+
+ifeq ($(call cc-option-yn, -fstack-protector),y)
+BOOTCFLAGS	+= -fno-stack-protector
+endif
+
+BOOTCFLAGS	+= -include $(srctree)/include/linux/compiler_attributes.h
+BOOTCFLAGS	+= -I$(objtree)/$(obj) -I$(srctree)/$(obj)
+
+DTC_FLAGS	?= -p 1024
+
+# The pre-boot decompressors pull in a lot of kernel headers and other source
+# files. This creates a bit of a dependency headache since we need to copy
+# these files into the build dir, fix up any includes and ensure that dependent
+# files are copied in the right order.
+
+# these need to be separate variables because they are copied out of different
+# directories in the kernel tree. Sure you COULD merge them, but it's a
+# cure-is-worse-than-disease situation.
+zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c
+zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c
+zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h
+zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h
+
+$(addprefix $(obj)/, decompress.o): \
+	$(addprefix $(obj)/,$(zlib-decomp-y))
+
+$(addprefix $(obj)/, $(zlib-decomp-y)): \
+	$(addprefix $(obj)/,$(zliblinuxheader-y)) \
+	$(addprefix $(obj)/,$(zlibheader-y)) \
+	$(addprefix $(obj)/,$(zlib-y))
+
+$(addprefix $(obj)/,$(zlib-y)): \
+	$(addprefix $(obj)/,$(zliblinuxheader-y)) \
+	$(addprefix $(obj)/,$(zlibheader-y))
+
+libfdt       := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdtheader := fdt.h libfdt.h libfdt_internal.h
+
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \
+	treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \
+	$(addprefix $(obj)/,$(libfdtheader))
+
+src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \
+		$(libfdt) libfdt-wrapper.c \
+		ns16550.c serial.c simple_alloc.c div64.S util.S \
+		elf_util.c $(zlib-y) devtree.c stdlib.c \
+		oflib.c ofconsole.c cuboot.c
+
+src-wlib-$(CONFIG_PPC_MPC52xx) += mpc52xx-psc.c
+src-wlib-$(CONFIG_PPC_POWERNV) += opal-calls.S opal.c
+ifndef CONFIG_PPC64_BOOT_WRAPPER
+src-wlib-y += crtsavres.S
+endif
+src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
+src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c
+src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
+src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c
+src-wlib-$(CONFIG_CPM) += cpm-serial.c
+
+src-plat-y := of.c epapr.c
+src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
+				cuboot-bamboo.c cuboot-sam440ep.c \
+				cuboot-sequoia.c cuboot-rainier.c \
+				cuboot-taishan.c cuboot-katmai.c \
+				cuboot-warp.c cuboot-yosemite.c \
+				treeboot-iss4xx.c treeboot-currituck.c \
+				treeboot-akebono.c \
+				simpleboot.c fixed-head.S
+src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
+src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
+src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
+src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
+src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
+src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c \
+					gamecube-head.S gamecube.c \
+					wii-head.S wii.c holly.c \
+					fixed-head.S mvme5100.c
+src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
+src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
+src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
+src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
+src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
+src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
+
+src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
+
+src-wlib := $(sort $(src-wlib-y))
+src-plat := $(sort $(src-plat-y))
+src-boot := $(src-wlib) $(src-plat) empty.c
+
+src-boot := $(addprefix $(obj)/, $(src-boot))
+obj-boot := $(addsuffix .o, $(basename $(src-boot)))
+obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
+obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
+obj-plat: $(libfdt)
+
+quiet_cmd_copy_kern_src = COPY    $@
+      cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@
+
+$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+	$(call cmd,copy_kern_src)
+
+$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+	$(call cmd,copy_kern_src)
+
+$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/%
+	$(call cmd,copy_kern_src)
+
+$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/%
+	$(call cmd,copy_kern_src)
+
+quiet_cmd_copy_libfdt = COPY    $@
+      cmd_copy_libfdt = cp $< $@
+
+$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+	$(call cmd,copy_libfdt)
+
+$(obj)/empty.c:
+	$(Q)touch $@
+
+$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(src)/%.S
+	$(Q)cp $< $@
+
+clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \
+		$(zlib-decomp-) $(libfdt) $(libfdtheader) \
+		empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
+
+quiet_cmd_bootcc = BOOTCC  $@
+      cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCPPFLAGS) $(BOOTCFLAGS) -c -o $@ $<
+
+quiet_cmd_bootas = BOOTAS  $@
+      cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCPPFLAGS) $(BOOTAFLAGS) -c -o $@ $<
+
+quiet_cmd_bootar = BOOTAR  $@
+      cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@
+
+$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
+	$(call if_changed_dep,bootcc)
+$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
+	$(Q)mkdir -p $(dir $@)
+	$(call if_changed_dep,bootcc)
+$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
+	$(Q)mkdir -p $(dir $@)
+	$(call if_changed_dep,bootas)
+
+$(obj)/wrapper.a: $(obj-wlib) FORCE
+	$(call if_changed,bootar)
+
+hostprogs	:= addnote hack-coff mktree
+
+targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) zImage.lds
+always-y	:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
+		   $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
+
+dtstree		:= $(src)/dts
+
+wrapper		:= $(src)/wrapper
+wrapperbits	:= $(always-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
+			$(wrapper) FORCE
+
+#############
+# Bits for building various flavours of zImage
+
+ifneq ($(CROSS32_COMPILE),)
+CROSSWRAP := -C "$(CROSS32_COMPILE)"
+else
+ifneq ($(CROSS_COMPILE),)
+CROSSWRAP := -C "$(CROSS_COMPILE)"
+endif
+endif
+
+compressor-$(CONFIG_KERNEL_GZIP) := gz
+compressor-$(CONFIG_KERNEL_XZ)   := xz
+compressor-$(CONFIG_KERNEL_LZMA)   := lzma
+compressor-$(CONFIG_KERNEL_LZO) := lzo
+
+# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
+quiet_cmd_wrap	= WRAP    $@
+      cmd_wrap	=$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \
+		$(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \
+		vmlinux
+
+image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
+image-$(CONFIG_PPC_POWERNV)		+= zImage.pseries
+image-$(CONFIG_PPC_PS3)			+= dtbImage.ps3
+image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
+image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
+image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
+image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
+image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
+image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
+
+#
+# Targets which embed a device tree blob
+#
+# Theses are default targets to build images which embed device tree blobs.
+# They are only required on boards which do not have FDT support in firmware.
+# Boards with newish u-boot firmware can use the uImage target above
+#
+
+# Board ports in arch/powerpc/platform/44x/Kconfig
+image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
+image-$(CONFIG_BAMBOO)			+= treeImage.bamboo cuImage.bamboo
+image-$(CONFIG_SAM440EP)		+= cuImage.sam440ep
+image-$(CONFIG_SEQUOIA)			+= cuImage.sequoia
+image-$(CONFIG_RAINIER)			+= cuImage.rainier
+image-$(CONFIG_TAISHAN)			+= cuImage.taishan
+image-$(CONFIG_KATMAI)			+= cuImage.katmai
+image-$(CONFIG_WARP)			+= cuImage.warp
+image-$(CONFIG_YOSEMITE)		+= cuImage.yosemite
+image-$(CONFIG_ISS4xx)			+= treeImage.iss4xx \
+					   treeImage.iss4xx-mpic
+image-$(CONFIG_CURRITUCK)			+= treeImage.currituck
+image-$(CONFIG_AKEBONO)			+= treeImage.akebono
+
+# Board ports in arch/powerpc/platform/8xx/Kconfig
+image-$(CONFIG_MPC86XADS)		+= cuImage.mpc866ads
+image-$(CONFIG_MPC885ADS)		+= cuImage.mpc885ads
+image-$(CONFIG_PPC_EP88XC)		+= dtbImage.ep88xc
+image-$(CONFIG_PPC_ADDER875)		+= cuImage.adder875-uboot \
+					   dtbImage.adder875-redboot
+
+# Board ports in arch/powerpc/platform/52xx/Kconfig
+image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200
+image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200b
+image-$(CONFIG_PPC_MEDIA5200)		+= cuImage.media5200
+
+# Board ports in arch/powerpc/platform/82xx/Kconfig
+image-$(CONFIG_EP8248E)			+= dtbImage.ep8248e
+
+# Board ports in arch/powerpc/platform/83xx/Kconfig
+image-$(CONFIG_MPC832x_RDB)		+= cuImage.mpc832x_rdb
+image-$(CONFIG_MPC834x_ITX)		+= cuImage.mpc8349emitx \
+					   cuImage.mpc8349emitxgp
+image-$(CONFIG_ASP834x)			+= dtbImage.asp834x-redboot
+
+# Board ports in arch/powerpc/platform/85xx/Kconfig
+image-$(CONFIG_MPC85xx_MDS)		+= cuImage.mpc8568mds
+image-$(CONFIG_MPC85xx_DS)		+= cuImage.mpc8544ds \
+					   cuImage.mpc8572ds
+image-$(CONFIG_TQM8540)			+= cuImage.tqm8540
+image-$(CONFIG_TQM8541)			+= cuImage.tqm8541
+image-$(CONFIG_TQM8548)			+= cuImage.tqm8548
+image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
+image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
+image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
+
+# Board ports in arch/powerpc/platform/86xx/Kconfig
+image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
+
+# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
+image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
+image-$(CONFIG_GAMECUBE)		+= dtbImage.gamecube
+image-$(CONFIG_WII)			+= dtbImage.wii
+image-$(CONFIG_MVME5100)		+= dtbImage.mvme5100
+
+# Board port in arch/powerpc/platform/amigaone/Kconfig
+image-$(CONFIG_AMIGAONE)		+= cuImage.amigaone
+
+image-$(CONFIG_PPC_MICROWATT)		+= dtbImage.microwatt
+
+# For 32-bit powermacs, build the COFF and miboot images
+# as well as the ELF images.
+ifdef CONFIG_PPC32
+image-$(CONFIG_PPC_PMAC)	+= zImage.coff zImage.miboot
+endif
+
+# Allow extra targets to be added to the defconfig
+image-y	+= $(CONFIG_EXTRA_TARGETS)
+
+initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-))
+initrd-y := $(patsubst zImage%, zImage.initrd%, \
+		$(patsubst dtbImage%, dtbImage.initrd%, \
+		$(patsubst simpleImage%, simpleImage.initrd%, \
+		$(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
+initrd-y := $(filter-out $(image-y), $(initrd-y))
+targets	+= $(image-y) $(initrd-y)
+targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \
+		$(patsubst $(x).%, dts/%.dtb, $(filter $(x).%, $(image-y))))
+targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \
+		$(patsubst $(x).%, dts/fsl/%.dtb, $(filter $(x).%, $(image-y))))
+
+$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
+
+# Don't put the ramdisk on the pattern rule; when its missing make will try
+# the pattern rule with less dependencies that also matches (even with the
+# hard dependency listed).
+$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE
+	$(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
+
+$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE
+	$(call if_changed,wrap,$(subst $(obj)/zImage.,,$@))
+
+# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
+	$(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
+	$(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb)
+
+# This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
+# prefix
+$(obj)/vmlinux.strip: vmlinux
+	$(STRIP) -s -R .comment $< -o $@
+
+$(obj)/uImage: vmlinux $(wrapperbits) FORCE
+	$(call if_changed,wrap,uboot)
+
+$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
+
+$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb)
+
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb)
+
+$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb)
+
+# Needed for the above targets to work with dts/fsl/ files
+$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb
+	@cp $< $@
+
+# If there isn't a platform selected then just strip the vmlinux.
+ifeq (,$(image-y))
+image-y := vmlinux.strip
+endif
+
+$(obj)/zImage:		$(addprefix $(obj)/, $(image-y))
+	$(Q)rm -f $@; ln $< $@
+$(obj)/zImage.initrd:	$(addprefix $(obj)/, $(initrd-y))
+	$(Q)rm -f $@; ln $< $@
+
+# anything not in $(targets)
+clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
+	zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
+	zImage.miboot zImage.pmac zImage.pseries \
+	simpleImage.* otheros.bld
+
+# clean up files cached by wrapper
+clean-kernel-base := vmlinux.strip vmlinux.bin
+clean-kernel := $(addsuffix .gz,$(clean-kernel-base))
+clean-kernel += $(addsuffix .xz,$(clean-kernel-base))
+# clean-files are relative to $(obj).
+clean-files += $(addprefix ../../../, $(clean-kernel))
+
+WRAPPER_OBJDIR := /usr/lib/kernel-wrapper
+WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
+WRAPPER_BINDIR := /usr/sbin
+INSTALL := install
+
+extra-installed		:= $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(always-y))
+hostprogs-installed	:= $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs))
+wrapper-installed	:= $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
+dts-installed		:= $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
+
+all-installed		:= $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed)
+
+quiet_cmd_mkdir           = MKDIR   $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
+      cmd_mkdir           = mkdir -p $@
+
+quiet_cmd_install	  = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@)
+      cmd_install	  = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@
+
+quiet_cmd_install_dts	  = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@)
+      cmd_install_dts	  = $(INSTALL)  -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@
+
+quiet_cmd_install_exe	  = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
+      cmd_install_exe	  = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@
+
+quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
+      cmd_install_wrapper = $(INSTALL)  -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\
+				sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \
+					  -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \
+
+
+$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR):
+	$(call cmd,mkdir)
+
+$(extra-installed)	: $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR)
+	$(call cmd,install)
+
+$(hostprogs-installed)  : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR)
+	$(call cmd,install_exe)
+
+$(dts-installed)	: $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR)
+	$(call cmd,install_dts)
+
+$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR)
+	$(call cmd,install_wrapper)
+
+$(obj)/bootwrapper_install: $(all-installed)