Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 72 insertions, 0 deletions

diff --git a/arch/parisc/lib/memset.c b/arch/parisc/lib/memset.c
new file mode 100644
index 000000000..133e48098
--- /dev/null
+++ b/arch/parisc/lib/memset.c
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#include <linux/types.h>
+#include <asm/string.h>
+
+#define OPSIZ (BITS_PER_LONG/8)
+typedef unsigned long op_t;
+
+void *
+memset (void *dstpp, int sc, size_t len)
+{
+  unsigned int c = sc;
+  long int dstp = (long int) dstpp;
+
+  if (len >= 8)
+    {
+      size_t xlen;
+      op_t cccc;
+
+      cccc = (unsigned char) c;
+      cccc |= cccc << 8;
+      cccc |= cccc << 16;
+      if (OPSIZ > 4)
+	/* Do the shift in two steps to avoid warning if long has 32 bits.  */
+	cccc |= (cccc << 16) << 16;
+
+      /* There are at least some bytes to set.
+	 No need to test for LEN == 0 in this alignment loop.  */
+      while (dstp % OPSIZ != 0)
+	{
+	  ((unsigned char *) dstp)[0] = c;
+	  dstp += 1;
+	  len -= 1;
+	}
+
+      /* Write 8 `op_t' per iteration until less than 8 `op_t' remain.  */
+      xlen = len / (OPSIZ * 8);
+      while (xlen > 0)
+	{
+	  ((op_t *) dstp)[0] = cccc;
+	  ((op_t *) dstp)[1] = cccc;
+	  ((op_t *) dstp)[2] = cccc;
+	  ((op_t *) dstp)[3] = cccc;
+	  ((op_t *) dstp)[4] = cccc;
+	  ((op_t *) dstp)[5] = cccc;
+	  ((op_t *) dstp)[6] = cccc;
+	  ((op_t *) dstp)[7] = cccc;
+	  dstp += 8 * OPSIZ;
+	  xlen -= 1;
+	}
+      len %= OPSIZ * 8;
+
+      /* Write 1 `op_t' per iteration until less than OPSIZ bytes remain.  */
+      xlen = len / OPSIZ;
+      while (xlen > 0)
+	{
+	  ((op_t *) dstp)[0] = cccc;
+	  dstp += OPSIZ;
+	  xlen -= 1;
+	}
+      len %= OPSIZ;
+    }
+
+  /* Write the last few bytes.  */
+  while (len > 0)
+    {
+      ((unsigned char *) dstp)[0] = c;
+      dstp += 1;
+      len -= 1;
+    }
+
+  return dstpp;
+}