ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 81 insertions, 0 deletions

diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
new file mode 100644
index 000000000..51af9d374
--- /dev/null
+++ b/arch/mips/rb532/setup.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * setup.c - boot time setup code
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/ioport.h>
+
+#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/pci.h>
+
+struct pci_reg __iomem *pci_reg;
+EXPORT_SYMBOL(pci_reg);
+
+static struct resource pci0_res[] = {
+	{
+		.name = "pci_reg0",
+		.start = PCI0_BASE_ADDR,
+		.end = PCI0_BASE_ADDR + sizeof(struct pci_reg),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static void rb_machine_restart(char *command)
+{
+	/* just jump to the reset vector */
+	writel(0x80000001, IDT434_REG_BASE + RST);
+	((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
+}
+
+static void rb_machine_halt(void)
+{
+	for (;;)
+		continue;
+}
+
+void __init plat_mem_setup(void)
+{
+	u32 val;
+
+	_machine_restart = rb_machine_restart;
+	_machine_halt = rb_machine_halt;
+	pm_power_off = rb_machine_halt;
+
+	set_io_port_base(KSEG1);
+
+	pci_reg = ioremap(pci0_res[0].start,
+				pci0_res[0].end - pci0_res[0].start);
+	if (!pci_reg) {
+		printk(KERN_ERR "Could not remap PCI registers\n");
+		return;
+	}
+
+	val = __raw_readl(&pci_reg->pcic);
+	val &= 0xFFFFFF7;
+	__raw_writel(val, (void *)&pci_reg->pcic);
+
+#ifdef CONFIG_PCI
+	/* Enable PCI interrupts in EPLD Mask register */
+	*epld_mask = 0x0;
+	*(epld_mask + 1) = 0x0;
+#endif
+	write_c0_wired(0);
+}
+
+const char *get_system_type(void)
+{
+	switch (mips_machtype) {
+	case MACH_MIKROTIK_RB532A:
+		return "Mikrotik RB532A";
+		break;
+	default:
+		return "Mikrotik RB532";
+		break;
+	}
+}