Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 162 insertions, 0 deletions

diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c
new file mode 100644
index 000000000..00aee98e9
--- /dev/null
+++ b/arch/mips/lib/bitops.c
@@ -0,0 +1,162 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994-1997, 99, 2000, 06, 07 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (c) 1999, 2000  Silicon Graphics, Inc.
+ */
+#include <linux/bitops.h>
+#include <linux/bits.h>
+#include <linux/irqflags.h>
+#include <linux/export.h>
+
+
+/**
+ * __mips_set_bit - Atomically set a bit in memory.  This is called by
+ * set_bit() if it cannot find a faster solution.
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ */
+void __mips_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = &addr[BIT_WORD(nr)];
+	unsigned int bit = nr % BITS_PER_LONG;
+	unsigned long mask;
+	unsigned long flags;
+
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	*a |= mask;
+	raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_set_bit);
+
+
+/**
+ * __mips_clear_bit - Clears a bit in memory.  This is called by clear_bit() if
+ * it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ */
+void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = &addr[BIT_WORD(nr)];
+	unsigned int bit = nr % BITS_PER_LONG;
+	unsigned long mask;
+	unsigned long flags;
+
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	*a &= ~mask;
+	raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_clear_bit);
+
+
+/**
+ * __mips_change_bit - Toggle a bit in memory.	This is called by change_bit()
+ * if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ */
+void __mips_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = &addr[BIT_WORD(nr)];
+	unsigned int bit = nr % BITS_PER_LONG;
+	unsigned long mask;
+	unsigned long flags;
+
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	*a ^= mask;
+	raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_change_bit);
+
+
+/**
+ * __mips_test_and_set_bit_lock - Set a bit and return its old value.  This is
+ * called by test_and_set_bit_lock() if it cannot find a faster solution.
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+int __mips_test_and_set_bit_lock(unsigned long nr,
+				 volatile unsigned long *addr)
+{
+	volatile unsigned long *a = &addr[BIT_WORD(nr)];
+	unsigned int bit = nr % BITS_PER_LONG;
+	unsigned long mask;
+	unsigned long flags;
+	int res;
+
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	res = (mask & *a) != 0;
+	*a |= mask;
+	raw_local_irq_restore(flags);
+	return res;
+}
+EXPORT_SYMBOL(__mips_test_and_set_bit_lock);
+
+
+/**
+ * __mips_test_and_clear_bit - Clear a bit and return its old value.  This is
+ * called by test_and_clear_bit() if it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ */
+int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = &addr[BIT_WORD(nr)];
+	unsigned int bit = nr % BITS_PER_LONG;
+	unsigned long mask;
+	unsigned long flags;
+	int res;
+
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	res = (mask & *a) != 0;
+	*a &= ~mask;
+	raw_local_irq_restore(flags);
+	return res;
+}
+EXPORT_SYMBOL(__mips_test_and_clear_bit);
+
+
+/**
+ * __mips_test_and_change_bit - Change a bit and return its old value.	This is
+ * called by test_and_change_bit() if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to count from
+ */
+int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = &addr[BIT_WORD(nr)];
+	unsigned int bit = nr % BITS_PER_LONG;
+	unsigned long mask;
+	unsigned long flags;
+	int res;
+
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	res = (mask & *a) != 0;
+	*a ^= mask;
+	raw_local_irq_restore(flags);
+	return res;
+}
+EXPORT_SYMBOL(__mips_test_and_change_bit);
+
+bool __mips_xor_is_negative_byte(unsigned long mask,
+		volatile unsigned long *addr)
+{
+	unsigned long flags;
+	unsigned long data;
+
+	raw_local_irq_save(flags);
+	data = *addr;
+	*addr = data ^ mask;
+	raw_local_irq_restore(flags);
+
+	return (data & BIT(7)) != 0;
+}