Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

4 files changed, 173 insertions, 0 deletions

diff --git a/arch/mips/econet/Kconfig b/arch/mips/econet/Kconfig
new file mode 100644
index 000000000..579fb5b01
--- /dev/null
+++ b/arch/mips/econet/Kconfig
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+if ECONET
+
+choice
+	prompt "EcoNet SoC selection"
+	default SOC_ECONET_EN751221
+	help
+	  Select EcoNet MIPS SoC type. Individual SoCs within a family are
+	  very similar, so is it enough to select the right family, and
+	  then customize to the specific SoC using the device tree only.
+
+	config SOC_ECONET_EN751221
+		bool "EN751221 family"
+		select COMMON_CLK
+		select ECONET_EN751221_INTC
+		select HAVE_PCI
+		select IRQ_MIPS_CPU
+		select PCI_DRIVERS_GENERIC
+		select SYS_SUPPORTS_MULTITHREADING
+		help
+		  The EN751221 family includes EN7512, RN7513, EN7521, EN7526.
+		  They are based on single core MIPS 34Kc processors. To boot
+		  this kernel, you will need a device tree such as
+		  MIPS_RAW_APPENDED_DTB=y, and a root filesystem.
+endchoice
+
+choice
+	prompt "Devicetree selection"
+	default DTB_ECONET_NONE
+	help
+	  Select the devicetree.
+
+	config DTB_ECONET_NONE
+		bool "None"
+
+	config DTB_ECONET_SMARTFIBER_XP8421_B
+		bool "EN751221 SmartFiber XP8421-B"
+		depends on SOC_ECONET_EN751221
+		select BUILTIN_DTB
+		help
+		  The SmartFiber XP8421-B is a device based on the EN751221 SoC.
+		  It has 512MB of memory and 256MB of NAND flash. This kernel
+		  needs only an appended initramfs to boot. It can be loaded
+		  through XMODEM and booted from memory in the bootloader, or
+		  it can be packed in tclinux.trx format and written to flash.
+endchoice
+
+endif
diff --git a/arch/mips/econet/Makefile b/arch/mips/econet/Makefile
new file mode 100644
index 000000000..7e4529e7d
--- /dev/null
+++ b/arch/mips/econet/Makefile
@@ -0,0 +1,2 @@
+
+obj-y := init.o
diff --git a/arch/mips/econet/Platform b/arch/mips/econet/Platform
new file mode 100644
index 000000000..ea5616447
--- /dev/null
+++ b/arch/mips/econet/Platform
@@ -0,0 +1,5 @@
+# To address a 7.2MB kernel size limit in the EcoNet SDK bootloader,
+# we put the load address well above where the bootloader loads and then use
+# zboot. So please set CONFIG_ZBOOT_LOAD_ADDRESS to the address where your
+# bootloader actually places the kernel.
+load-$(CONFIG_ECONET)	+= 0xffffffff81000000
diff --git a/arch/mips/econet/init.c b/arch/mips/econet/init.c
new file mode 100644
index 000000000..ae45b8788
--- /dev/null
+++ b/arch/mips/econet/init.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * EcoNet setup code
+ *
+ * Copyright (C) 2025 Caleb James DeLisle <cjd@cjdns.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/of_clk.h>
+#include <linux/irqchip.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/reboot.h>
+
+#define CR_AHB_RSTCR		((void __iomem *)CKSEG1ADDR(0x1fb00040))
+#define RESET			BIT(31)
+
+#define UART_BASE		CKSEG1ADDR(0x1fbf0003)
+#define UART_REG_SHIFT		2
+
+static void hw_reset(char *command)
+{
+	iowrite32(RESET, CR_AHB_RSTCR);
+}
+
+/*
+ * vsmp_init_secondary expects either GIC or cascading interrupt configuration.
+ * The EN751221 is a 34Kc with VEIC, but not GIC compatible. The cascading
+ * configuration enables lines 6 and 7 for performance counters, but when this
+ * is done on the EN751221 intc with VEIC enabled, it causes the whole intc to
+ * stop sending interrupts.
+ * Only unmask lines 0 and 1 (software interrupts) in init_secondary.
+ */
+#ifdef CONFIG_MIPS_MT_SMP
+extern const struct plat_smp_ops vsmp_smp_ops;
+static struct plat_smp_ops en75_smp_ops __ro_after_init;
+
+static void en751221_init_secondary(void)
+{
+	write_c0_status((read_c0_status() & ~ST0_IM) |
+		(STATUSF_IP0 | STATUSF_IP1));
+}
+
+static int __init en751221_register_vsmp_smp_ops(void)
+{
+	if (!cpu_has_mipsmt)
+		return -ENODEV;
+
+	en75_smp_ops = vsmp_smp_ops;
+	en75_smp_ops.init_secondary = en751221_init_secondary;
+	register_smp_ops(&en75_smp_ops);
+	return 0;
+}
+#else
+static int __init en751221_register_vsmp_smp_ops(void)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_MIPS_MT_SMP */
+
+/* 1. Bring up early printk. */
+void __init prom_init(void)
+{
+	setup_8250_early_printk_port(UART_BASE, UART_REG_SHIFT, 0);
+	_machine_restart = hw_reset;
+}
+
+/* 2. Parse the DT and find memory */
+void __init plat_mem_setup(void)
+{
+	void *dtb;
+
+	set_io_port_base(KSEG1);
+
+	dtb = get_fdt();
+	if (!dtb)
+		panic("no dtb found");
+
+	__dt_setup_arch(dtb);
+
+	early_init_dt_scan_memory();
+}
+
+/* 3. Overload __weak device_tree_init(), add SMP ops */
+void __init device_tree_init(void)
+{
+	unflatten_and_copy_device_tree();
+
+	/* EN751221 dual-vpe */
+	if (!en751221_register_vsmp_smp_ops())
+		return;
+
+	/* EN751221 with MT_SMP disabled */
+	register_up_smp_ops();
+}
+
+const char *get_system_type(void)
+{
+	return "EcoNet-EN75xx";
+}
+
+/* 4. Initialize the IRQ subsystem */
+void __init arch_init_irq(void)
+{
+	irqchip_init();
+}
+
+/* 5. Timers */
+void __init plat_time_init(void)
+{
+	of_clk_init(NULL);
+	timer_probe();
+}