treewide: refresh kmalloc_obj() conversionsgrafted

This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci

This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.

Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.

Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>

4 files changed, 173 insertions, 0 deletions

diff --git a/arch/mips/econet/Kconfig b/arch/mips/econet/Kconfig
new file mode 100644
index 000000000..579fb5b01
--- /dev/null
+++ b/arch/mips/econet/Kconfig
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+if ECONET
+
+choice
+	prompt "EcoNet SoC selection"
+	default SOC_ECONET_EN751221
+	help
+	  Select EcoNet MIPS SoC type. Individual SoCs within a family are
+	  very similar, so is it enough to select the right family, and
+	  then customize to the specific SoC using the device tree only.
+
+	config SOC_ECONET_EN751221
+		bool "EN751221 family"
+		select COMMON_CLK
+		select ECONET_EN751221_INTC
+		select HAVE_PCI
+		select IRQ_MIPS_CPU
+		select PCI_DRIVERS_GENERIC
+		select SYS_SUPPORTS_MULTITHREADING
+		help
+		  The EN751221 family includes EN7512, RN7513, EN7521, EN7526.
+		  They are based on single core MIPS 34Kc processors. To boot
+		  this kernel, you will need a device tree such as
+		  MIPS_RAW_APPENDED_DTB=y, and a root filesystem.
+endchoice
+
+choice
+	prompt "Devicetree selection"
+	default DTB_ECONET_NONE
+	help
+	  Select the devicetree.
+
+	config DTB_ECONET_NONE
+		bool "None"
+
+	config DTB_ECONET_SMARTFIBER_XP8421_B
+		bool "EN751221 SmartFiber XP8421-B"
+		depends on SOC_ECONET_EN751221
+		select BUILTIN_DTB
+		help
+		  The SmartFiber XP8421-B is a device based on the EN751221 SoC.
+		  It has 512MB of memory and 256MB of NAND flash. This kernel
+		  needs only an appended initramfs to boot. It can be loaded
+		  through XMODEM and booted from memory in the bootloader, or
+		  it can be packed in tclinux.trx format and written to flash.
+endchoice
+
+endif
diff --git a/arch/mips/econet/Makefile b/arch/mips/econet/Makefile
new file mode 100644
index 000000000..7e4529e7d
--- /dev/null
+++ b/arch/mips/econet/Makefile
@@ -0,0 +1,2 @@
+
+obj-y := init.o
diff --git a/arch/mips/econet/Platform b/arch/mips/econet/Platform
new file mode 100644
index 000000000..ea5616447
--- /dev/null
+++ b/arch/mips/econet/Platform
@@ -0,0 +1,5 @@
+# To address a 7.2MB kernel size limit in the EcoNet SDK bootloader,
+# we put the load address well above where the bootloader loads and then use
+# zboot. So please set CONFIG_ZBOOT_LOAD_ADDRESS to the address where your
+# bootloader actually places the kernel.
+load-$(CONFIG_ECONET)	+= 0xffffffff81000000
diff --git a/arch/mips/econet/init.c b/arch/mips/econet/init.c
new file mode 100644
index 000000000..ae45b8788
--- /dev/null
+++ b/arch/mips/econet/init.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * EcoNet setup code
+ *
+ * Copyright (C) 2025 Caleb James DeLisle <cjd@cjdns.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/of_clk.h>
+#include <linux/irqchip.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/reboot.h>
+
+#define CR_AHB_RSTCR		((void __iomem *)CKSEG1ADDR(0x1fb00040))
+#define RESET			BIT(31)
+
+#define UART_BASE		CKSEG1ADDR(0x1fbf0003)
+#define UART_REG_SHIFT		2
+
+static void hw_reset(char *command)
+{
+	iowrite32(RESET, CR_AHB_RSTCR);
+}
+
+/*
+ * vsmp_init_secondary expects either GIC or cascading interrupt configuration.
+ * The EN751221 is a 34Kc with VEIC, but not GIC compatible. The cascading
+ * configuration enables lines 6 and 7 for performance counters, but when this
+ * is done on the EN751221 intc with VEIC enabled, it causes the whole intc to
+ * stop sending interrupts.
+ * Only unmask lines 0 and 1 (software interrupts) in init_secondary.
+ */
+#ifdef CONFIG_MIPS_MT_SMP
+extern const struct plat_smp_ops vsmp_smp_ops;
+static struct plat_smp_ops en75_smp_ops __ro_after_init;
+
+static void en751221_init_secondary(void)
+{
+	write_c0_status((read_c0_status() & ~ST0_IM) |
+		(STATUSF_IP0 | STATUSF_IP1));
+}
+
+static int __init en751221_register_vsmp_smp_ops(void)
+{
+	if (!cpu_has_mipsmt)
+		return -ENODEV;
+
+	en75_smp_ops = vsmp_smp_ops;
+	en75_smp_ops.init_secondary = en751221_init_secondary;
+	register_smp_ops(&en75_smp_ops);
+	return 0;
+}
+#else
+static int __init en751221_register_vsmp_smp_ops(void)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_MIPS_MT_SMP */
+
+/* 1. Bring up early printk. */
+void __init prom_init(void)
+{
+	setup_8250_early_printk_port(UART_BASE, UART_REG_SHIFT, 0);
+	_machine_restart = hw_reset;
+}
+
+/* 2. Parse the DT and find memory */
+void __init plat_mem_setup(void)
+{
+	void *dtb;
+
+	set_io_port_base(KSEG1);
+
+	dtb = get_fdt();
+	if (!dtb)
+		panic("no dtb found");
+
+	__dt_setup_arch(dtb);
+
+	early_init_dt_scan_memory();
+}
+
+/* 3. Overload __weak device_tree_init(), add SMP ops */
+void __init device_tree_init(void)
+{
+	unflatten_and_copy_device_tree();
+
+	/* EN751221 dual-vpe */
+	if (!en751221_register_vsmp_smp_ops())
+		return;
+
+	/* EN751221 with MT_SMP disabled */
+	register_up_smp_ops();
+}
+
+const char *get_system_type(void)
+{
+	return "EcoNet-EN75xx";
+}
+
+/* 4. Initialize the IRQ subsystem */
+void __init arch_init_irq(void)
+{
+	irqchip_init();
+}
+
+/* 5. Timers */
+void __init plat_time_init(void)
+{
+	of_clk_init(NULL);
+	timer_probe();
+}