staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 118 insertions, 0 deletions

diff --git a/arch/mips/econet/init.c b/arch/mips/econet/init.c
new file mode 100644
index 000000000..ae45b8788
--- /dev/null
+++ b/arch/mips/econet/init.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * EcoNet setup code
+ *
+ * Copyright (C) 2025 Caleb James DeLisle <cjd@cjdns.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/of_clk.h>
+#include <linux/irqchip.h>
+
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/reboot.h>
+
+#define CR_AHB_RSTCR		((void __iomem *)CKSEG1ADDR(0x1fb00040))
+#define RESET			BIT(31)
+
+#define UART_BASE		CKSEG1ADDR(0x1fbf0003)
+#define UART_REG_SHIFT		2
+
+static void hw_reset(char *command)
+{
+	iowrite32(RESET, CR_AHB_RSTCR);
+}
+
+/*
+ * vsmp_init_secondary expects either GIC or cascading interrupt configuration.
+ * The EN751221 is a 34Kc with VEIC, but not GIC compatible. The cascading
+ * configuration enables lines 6 and 7 for performance counters, but when this
+ * is done on the EN751221 intc with VEIC enabled, it causes the whole intc to
+ * stop sending interrupts.
+ * Only unmask lines 0 and 1 (software interrupts) in init_secondary.
+ */
+#ifdef CONFIG_MIPS_MT_SMP
+extern const struct plat_smp_ops vsmp_smp_ops;
+static struct plat_smp_ops en75_smp_ops __ro_after_init;
+
+static void en751221_init_secondary(void)
+{
+	write_c0_status((read_c0_status() & ~ST0_IM) |
+		(STATUSF_IP0 | STATUSF_IP1));
+}
+
+static int __init en751221_register_vsmp_smp_ops(void)
+{
+	if (!cpu_has_mipsmt)
+		return -ENODEV;
+
+	en75_smp_ops = vsmp_smp_ops;
+	en75_smp_ops.init_secondary = en751221_init_secondary;
+	register_smp_ops(&en75_smp_ops);
+	return 0;
+}
+#else
+static int __init en751221_register_vsmp_smp_ops(void)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_MIPS_MT_SMP */
+
+/* 1. Bring up early printk. */
+void __init prom_init(void)
+{
+	setup_8250_early_printk_port(UART_BASE, UART_REG_SHIFT, 0);
+	_machine_restart = hw_reset;
+}
+
+/* 2. Parse the DT and find memory */
+void __init plat_mem_setup(void)
+{
+	void *dtb;
+
+	set_io_port_base(KSEG1);
+
+	dtb = get_fdt();
+	if (!dtb)
+		panic("no dtb found");
+
+	__dt_setup_arch(dtb);
+
+	early_init_dt_scan_memory();
+}
+
+/* 3. Overload __weak device_tree_init(), add SMP ops */
+void __init device_tree_init(void)
+{
+	unflatten_and_copy_device_tree();
+
+	/* EN751221 dual-vpe */
+	if (!en751221_register_vsmp_smp_ops())
+		return;
+
+	/* EN751221 with MT_SMP disabled */
+	register_up_smp_ops();
+}
+
+const char *get_system_type(void)
+{
+	return "EcoNet-EN75xx";
+}
+
+/* 4. Initialize the IRQ subsystem */
+void __init arch_init_irq(void)
+{
+	irqchip_init();
+}
+
+/* 5. Timers */
+void __init plat_time_init(void)
+{
+	of_clk_init(NULL);
+	timer_probe();
+}