Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 178 insertions, 0 deletions

diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
new file mode 100644
index 000000000..81529084b
--- /dev/null
+++ b/arch/mips/bcm63xx/setup.c
@@ -0,0 +1,178 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/memblock.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <asm/bmips.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+#include <asm/cacheflush.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_gpio.h>
+
+/*
+ * CBR addr doesn't change and we can cache it.
+ * For broken SoC/Bootloader CBR addr might also be provided via DT
+ * with "brcm,bmips-cbr-reg" in the "cpus" node.
+ */
+void __iomem *bmips_cbr_addr __read_mostly;
+
+void bcm63xx_machine_halt(void)
+{
+	pr_info("System halted\n");
+	while (1)
+		;
+}
+
+static void bcm6348_a1_reboot(void)
+{
+	u32 reg;
+
+	/* soft reset all blocks */
+	pr_info("soft-resetting all blocks ...\n");
+	reg = bcm_perf_readl(PERF_SOFTRESET_REG);
+	reg &= ~SOFTRESET_6348_ALL;
+	bcm_perf_writel(reg, PERF_SOFTRESET_REG);
+	mdelay(10);
+
+	reg = bcm_perf_readl(PERF_SOFTRESET_REG);
+	reg |= SOFTRESET_6348_ALL;
+	bcm_perf_writel(reg, PERF_SOFTRESET_REG);
+	mdelay(10);
+
+	/* Jump to the power on address. */
+	pr_info("jumping to reset vector.\n");
+	/* set high vectors (base at 0xbfc00000 */
+	set_c0_status(ST0_BEV | ST0_ERL);
+	/* run uncached in kseg0 */
+	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+	__flush_cache_all();
+	/* remove all wired TLB entries */
+	write_c0_wired(0);
+	__asm__ __volatile__(
+		"jr\t%0"
+		:
+		: "r" (0xbfc00000));
+	while (1)
+		;
+}
+
+void bcm63xx_machine_reboot(void)
+{
+	u32 reg, perf_regs[2] = { 0, 0 };
+	unsigned int i;
+
+	/* mask and clear all external irq */
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM3368_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
+		break;
+	case BCM6328_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
+		break;
+	case BCM6338_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338;
+		break;
+	case BCM6345_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6345;
+		break;
+	case BCM6348_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6348;
+		break;
+	case BCM6358_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6358;
+		break;
+	case BCM6362_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6362;
+		break;
+	}
+
+	for (i = 0; i < 2; i++) {
+		if (!perf_regs[i])
+			break;
+
+		reg = bcm_perf_readl(perf_regs[i]);
+		if (BCMCPU_IS_6348()) {
+			reg &= ~EXTIRQ_CFG_MASK_ALL_6348;
+			reg |= EXTIRQ_CFG_CLEAR_ALL_6348;
+		} else {
+			reg &= ~EXTIRQ_CFG_MASK_ALL;
+			reg |= EXTIRQ_CFG_CLEAR_ALL;
+		}
+		bcm_perf_writel(reg, perf_regs[i]);
+	}
+
+	if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
+		bcm6348_a1_reboot();
+
+	pr_info("triggering watchdog soft-reset...\n");
+	if (BCMCPU_IS_6328()) {
+		bcm_wdt_writel(1, WDT_SOFTRESET_REG);
+	} else {
+		reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
+		reg |= SYS_PLL_SOFT_RESET;
+		bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
+	}
+	while (1)
+		;
+}
+
+static void __bcm63xx_machine_reboot(char *p)
+{
+	bcm63xx_machine_reboot();
+}
+
+/*
+ * return system type in /proc/cpuinfo
+ */
+const char *get_system_type(void)
+{
+	static char buf[128];
+	snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%02X)",
+		 board_get_name(),
+		 bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
+	return buf;
+}
+
+void __init plat_time_init(void)
+{
+	mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2;
+}
+
+void __init plat_mem_setup(void)
+{
+	memblock_add(0, bcm63xx_get_memory_size());
+
+	_machine_halt = bcm63xx_machine_halt;
+	_machine_restart = __bcm63xx_machine_reboot;
+	pm_power_off = bcm63xx_machine_halt;
+
+	set_io_port_base(0);
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0;
+
+	board_setup();
+}
+
+static int __init bcm63xx_register_devices(void)
+{
+	/* register gpiochip */
+	bcm63xx_gpio_init();
+
+	return board_register_devices();
+}
+
+arch_initcall(bcm63xx_register_devices);