ata: libata-scsi: fix ata_dsm_trim_pages() kernel-docgrafted

make htmldocs fails with:

  Documentation/driver-api/libata:604: ./drivers/ata/libata-scsi.c:2301:
  ERROR: Unexpected indentation. [docutils]

The Return: section of ata_dsm_trim_pages() ends its first sentence with
a colon and continues with an indented bullet list. reStructuredText
requires a blank line before an indented block, so docutils chokes on
the list.

Simply adding the missing blank line does not work either: Return: is a
kernel-doc "special section", which is terminated by the first blank
line, so the bullet list would end up in the Description section,
detached from the sentence introducing it.

Spell the two bounds out as prose instead, so that the Return: section
stays self-contained. Documentation-only change.

Fixes: e64e6b5dc867 ("ata: libata-scsi: scale DSM TRIM payload by MAX PAGES PER DSM COMMAND")
Reported-by: Thomas Huth <thuth@redhat.com>
Closes: https://lore.kernel.org/linux-ide/b0a0b8e8-cc4f-4c7b-8bc5-fee0712d405a@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20260916130031.29990-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>

14 files changed, 5677 insertions, 0 deletions

diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
new file mode 100644
index 000000000..a0e94388d
--- /dev/null
+++ b/arch/mips/alchemy/common/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+#  Copyright 2000, 2008 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
+#
+# Makefile for the Alchemy Au1xx0 CPUs, generic files.
+#
+
+obj-y += prom.o time.o clock.o platform.o power.o gpiolib.o \
+	 setup.o sleeper.o dma.o dbdma.o vss.o irq.o usb.o
diff --git a/arch/mips/alchemy/common/clock.c b/arch/mips/alchemy/common/clock.c
new file mode 100644
index 000000000..62a7304ff
--- /dev/null
+++ b/arch/mips/alchemy/common/clock.c
@@ -0,0 +1,1120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Alchemy clocks.
+ *
+ * Exposes all configurable internal clock sources to the clk framework.
+ *
+ * We have:
+ *  - Root source, usually 12MHz supplied by an external crystal
+ *  - 3 PLLs which generate multiples of root rate [AUX, CPU, AUX2]
+ *
+ * Dividers:
+ *  - 6 clock dividers with:
+ *   * selectable source [one of the PLLs],
+ *   * output divided between [2 .. 512 in steps of 2] (!Au1300)
+ *     or [1 .. 256 in steps of 1] (Au1300),
+ *   * can be enabled individually.
+ *
+ * - up to 6 "internal" (fixed) consumers which:
+ *   * take either AUXPLL or one of the above 6 dividers as input,
+ *   * divide this input by 1, 2, or 4 (and 3 on Au1300).
+ *   * can be disabled separately.
+ *
+ * Misc clocks:
+ * - sysbus clock: CPU core clock (CPUPLL) divided by 2, 3 or 4.
+ *    depends on board design and should be set by bootloader, read-only.
+ * - peripheral clock: half the rate of sysbus clock, source for a lot
+ *    of peripheral blocks, read-only.
+ * - memory clock: clk rate to main memory chips, depends on board
+ *    design and is read-only,
+ * - lrclk: the static bus clock signal for synchronous operation.
+ *    depends on board design, must be set by bootloader,
+ *    but may be required to correctly configure devices attached to
+ *    the static bus. The Au1000/1500/1100 manuals call it LCLK, on
+ *    later models it's called RCLK.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* Base clock: 12MHz is the default in all databooks, and I haven't
+ * found any board yet which uses a different rate.
+ */
+#define ALCHEMY_ROOTCLK_RATE	12000000
+
+/*
+ * the internal sources which can be driven by the PLLs and dividers.
+ * Names taken from the databooks, refer to them for more information,
+ * especially which ones are share a clock line.
+ */
+static const char * const alchemy_au1300_intclknames[] = {
+	"lcd_intclk", "gpemgp_clk", "maempe_clk", "maebsa_clk",
+	"EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1200_intclknames[] = {
+	"lcd_intclk", NULL, NULL, NULL, "EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1550_intclknames[] = {
+	"usb_clk", "psc0_intclk", "psc1_intclk", "pci_clko",
+	"EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1100_intclknames[] = {
+	"usb_clk", "lcd_intclk", NULL, "i2s_clk", "EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1500_intclknames[] = {
+	NULL, "usbd_clk", "usbh_clk", "pci_clko", "EXTCLK0", "EXTCLK1"
+};
+
+static const char * const alchemy_au1000_intclknames[] = {
+	"irda_clk", "usbd_clk", "usbh_clk", "i2s_clk", "EXTCLK0",
+	"EXTCLK1"
+};
+
+/* aliases for a few on-chip sources which are either shared
+ * or have gone through name changes.
+ */
+static struct clk_aliastable {
+	char *alias;
+	char *base;
+	int cputype;
+} alchemy_clk_aliases[] __initdata = {
+	{ "usbh_clk", "usb_clk",    ALCHEMY_CPU_AU1100 },
+	{ "usbd_clk", "usb_clk",    ALCHEMY_CPU_AU1100 },
+	{ "irda_clk", "usb_clk",    ALCHEMY_CPU_AU1100 },
+	{ "usbh_clk", "usb_clk",    ALCHEMY_CPU_AU1550 },
+	{ "usbd_clk", "usb_clk",    ALCHEMY_CPU_AU1550 },
+	{ "psc2_intclk", "usb_clk", ALCHEMY_CPU_AU1550 },
+	{ "psc3_intclk", "EXTCLK0", ALCHEMY_CPU_AU1550 },
+	{ "psc0_intclk", "EXTCLK0", ALCHEMY_CPU_AU1200 },
+	{ "psc1_intclk", "EXTCLK1", ALCHEMY_CPU_AU1200 },
+	{ "psc0_intclk", "EXTCLK0", ALCHEMY_CPU_AU1300 },
+	{ "psc2_intclk", "EXTCLK0", ALCHEMY_CPU_AU1300 },
+	{ "psc1_intclk", "EXTCLK1", ALCHEMY_CPU_AU1300 },
+	{ "psc3_intclk", "EXTCLK1", ALCHEMY_CPU_AU1300 },
+
+	{ NULL, NULL, 0 },
+};
+
+#define IOMEM(x)	((void __iomem *)(KSEG1ADDR(CPHYSADDR(x))))
+
+/* access locks to SYS_FREQCTRL0/1 and SYS_CLKSRC registers */
+static spinlock_t alchemy_clk_fg0_lock;
+static spinlock_t alchemy_clk_fg1_lock;
+static DEFINE_SPINLOCK(alchemy_clk_csrc_lock);
+
+/* CPU Core clock *****************************************************/
+
+static unsigned long alchemy_clk_cpu_recalc(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	unsigned long t;
+
+	/*
+	 * On early Au1000, sys_cpupll was write-only. Since these
+	 * silicon versions of Au1000 are not sold, we don't bend
+	 * over backwards trying to determine the frequency.
+	 */
+	if (unlikely(au1xxx_cpu_has_pll_wo()))
+		t = 396000000;
+	else {
+		t = alchemy_rdsys(AU1000_SYS_CPUPLL) & 0x7f;
+		if (alchemy_get_cputype() < ALCHEMY_CPU_AU1300)
+			t &= 0x3f;
+		t *= parent_rate;
+	}
+
+	return t;
+}
+
+void __init alchemy_set_lpj(void)
+{
+	preset_lpj = alchemy_clk_cpu_recalc(NULL, ALCHEMY_ROOTCLK_RATE);
+	preset_lpj /= 2 * HZ;
+}
+
+static const struct clk_ops alchemy_clkops_cpu = {
+	.recalc_rate	= alchemy_clk_cpu_recalc,
+};
+
+static struct clk __init *alchemy_clk_setup_cpu(const char *parent_name,
+						int ctype)
+{
+	struct clk_init_data id;
+	struct clk_hw *h;
+	struct clk *clk;
+
+	h = kzalloc_obj(*h);
+	if (!h)
+		return ERR_PTR(-ENOMEM);
+
+	id.name = ALCHEMY_CPU_CLK;
+	id.parent_names = &parent_name;
+	id.num_parents = 1;
+	id.flags = 0;
+	id.ops = &alchemy_clkops_cpu;
+	h->init = &id;
+
+	clk = clk_register(NULL, h);
+	if (IS_ERR(clk)) {
+		pr_err("failed to register clock\n");
+		kfree(h);
+	}
+
+	return clk;
+}
+
+/* AUXPLLs ************************************************************/
+
+struct alchemy_auxpll_clk {
+	struct clk_hw hw;
+	unsigned long reg;	/* au1300 has also AUXPLL2 */
+	int maxmult;		/* max multiplier */
+};
+#define to_auxpll_clk(x) container_of(x, struct alchemy_auxpll_clk, hw)
+
+static unsigned long alchemy_clk_aux_recalc(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct alchemy_auxpll_clk *a = to_auxpll_clk(hw);
+
+	return (alchemy_rdsys(a->reg) & 0xff) * parent_rate;
+}
+
+static int alchemy_clk_aux_setr(struct clk_hw *hw,
+				unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct alchemy_auxpll_clk *a = to_auxpll_clk(hw);
+	unsigned long d = rate;
+
+	if (rate)
+		d /= parent_rate;
+	else
+		d = 0;
+
+	/* minimum is 84MHz, max is 756-1032 depending on variant */
+	if (((d < 7) && (d != 0)) || (d > a->maxmult))
+		return -EINVAL;
+
+	alchemy_wrsys(d, a->reg);
+	return 0;
+}
+
+static int alchemy_clk_aux_determine_rate(struct clk_hw *hw,
+					  struct clk_rate_request *req)
+{
+	struct alchemy_auxpll_clk *a = to_auxpll_clk(hw);
+	unsigned long mult;
+
+	if (!req->rate || !req->best_parent_rate) {
+		req->rate = 0;
+
+		return 0;
+	}
+
+	mult = req->rate / req->best_parent_rate;
+
+	if (mult && (mult < 7))
+		mult = 7;
+	if (mult > a->maxmult)
+		mult = a->maxmult;
+
+	req->rate = req->best_parent_rate * mult;
+
+	return 0;
+}
+
+static const struct clk_ops alchemy_clkops_aux = {
+	.recalc_rate	= alchemy_clk_aux_recalc,
+	.set_rate	= alchemy_clk_aux_setr,
+	.determine_rate = alchemy_clk_aux_determine_rate,
+};
+
+static struct clk __init *alchemy_clk_setup_aux(const char *parent_name,
+						char *name, int maxmult,
+						unsigned long reg)
+{
+	struct clk_init_data id;
+	struct clk *c;
+	struct alchemy_auxpll_clk *a;
+
+	a = kzalloc_obj(*a);
+	if (!a)
+		return ERR_PTR(-ENOMEM);
+
+	id.name = name;
+	id.parent_names = &parent_name;
+	id.num_parents = 1;
+	id.flags = CLK_GET_RATE_NOCACHE;
+	id.ops = &alchemy_clkops_aux;
+
+	a->reg = reg;
+	a->maxmult = maxmult;
+	a->hw.init = &id;
+
+	c = clk_register(NULL, &a->hw);
+	if (!IS_ERR(c))
+		clk_register_clkdev(c, name, NULL);
+	else
+		kfree(a);
+
+	return c;
+}
+
+/* sysbus_clk *********************************************************/
+
+static struct clk __init  *alchemy_clk_setup_sysbus(const char *pn)
+{
+	unsigned long v = (alchemy_rdsys(AU1000_SYS_POWERCTRL) & 3) + 2;
+	struct clk *c;
+
+	c = clk_register_fixed_factor(NULL, ALCHEMY_SYSBUS_CLK,
+				      pn, 0, 1, v);
+	if (!IS_ERR(c))
+		clk_register_clkdev(c, ALCHEMY_SYSBUS_CLK, NULL);
+	return c;
+}
+
+/* Peripheral Clock ***************************************************/
+
+static struct clk __init *alchemy_clk_setup_periph(const char *pn)
+{
+	/* Peripheral clock runs at half the rate of sysbus clk */
+	struct clk *c;
+
+	c = clk_register_fixed_factor(NULL, ALCHEMY_PERIPH_CLK,
+				      pn, 0, 1, 2);
+	if (!IS_ERR(c))
+		clk_register_clkdev(c, ALCHEMY_PERIPH_CLK, NULL);
+	return c;
+}
+
+/* mem clock **********************************************************/
+
+static struct clk __init *alchemy_clk_setup_mem(const char *pn, int ct)
+{
+	void __iomem *addr = IOMEM(AU1000_MEM_PHYS_ADDR);
+	unsigned long v;
+	struct clk *c;
+	int div;
+
+	switch (ct) {
+	case ALCHEMY_CPU_AU1550:
+	case ALCHEMY_CPU_AU1200:
+		v = __raw_readl(addr + AU1550_MEM_SDCONFIGB);
+		div = (v & (1 << 15)) ? 1 : 2;
+		break;
+	case ALCHEMY_CPU_AU1300:
+		v = __raw_readl(addr + AU1550_MEM_SDCONFIGB);
+		div = (v & (1 << 31)) ? 1 : 2;
+		break;
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+	default:
+		div = 2;
+		break;
+	}
+
+	c = clk_register_fixed_factor(NULL, ALCHEMY_MEM_CLK, pn,
+				      0, 1, div);
+	if (!IS_ERR(c))
+		clk_register_clkdev(c, ALCHEMY_MEM_CLK, NULL);
+	return c;
+}
+
+/* lrclk: external synchronous static bus clock ***********************/
+
+static struct clk __init *alchemy_clk_setup_lrclk(const char *pn, int t)
+{
+	/* Au1000, Au1500: MEM_STCFG0[11]: If bit is set, lrclk=pclk/5,
+	 * otherwise lrclk=pclk/4.
+	 * All other variants: MEM_STCFG0[15:13] = divisor.
+	 * L/RCLK = periph_clk / (divisor + 1)
+	 * On Au1000, Au1500, Au1100 it's called LCLK,
+	 * on later models it's called RCLK, but it's the same thing.
+	 */
+	struct clk *c;
+	unsigned long v = alchemy_rdsmem(AU1000_MEM_STCFG0);
+
+	switch (t) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+		v = 4 + ((v >> 11) & 1);
+		break;
+	default:	/* all other models */
+		v = ((v >> 13) & 7) + 1;
+	}
+	c = clk_register_fixed_factor(NULL, ALCHEMY_LR_CLK,
+				      pn, 0, 1, v);
+	if (!IS_ERR(c))
+		clk_register_clkdev(c, ALCHEMY_LR_CLK, NULL);
+	return c;
+}
+
+/* Clock dividers and muxes *******************************************/
+
+/* data for fgen and csrc mux-dividers */
+struct alchemy_fgcs_clk {
+	struct clk_hw hw;
+	spinlock_t *reglock;	/* register lock		  */
+	unsigned long reg;	/* SYS_FREQCTRL0/1		  */
+	int shift;		/* offset in register		  */
+	int parent;		/* parent before disable [Au1300] */
+	int isen;		/* is it enabled?		  */
+	int *dt;		/* dividertable for csrc	  */
+};
+#define to_fgcs_clk(x) container_of(x, struct alchemy_fgcs_clk, hw)
+
+static long alchemy_calc_div(unsigned long rate, unsigned long prate,
+			       int scale, int maxdiv, unsigned long *rv)
+{
+	long div1, div2;
+
+	div1 = prate / rate;
+	if ((prate / div1) > rate)
+		div1++;
+
+	if (scale == 2) {	/* only div-by-multiple-of-2 possible */
+		if (div1 & 1)
+			div1++;	/* stay <=prate */
+	}
+
+	div2 = (div1 / scale) - 1;	/* value to write to register */
+
+	if (div2 > maxdiv)
+		div2 = maxdiv;
+	if (rv)
+		*rv = div2;
+
+	div1 = ((div2 + 1) * scale);
+	return div1;
+}
+
+static int alchemy_clk_fgcs_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req,
+				 int scale, int maxdiv)
+{
+	struct clk_hw *pc, *bpc, *free;
+	long tdv, tpr, pr, nr, br, bpr, diff, lastdiff;
+	int j;
+
+	lastdiff = INT_MAX;
+	bpr = 0;
+	bpc = NULL;
+	br = -EINVAL;
+	free = NULL;
+
+	/* look at the rates each enabled parent supplies and select
+	 * the one that gets closest to but not over the requested rate.
+	 */
+	for (j = 0; j < 7; j++) {
+		pc = clk_hw_get_parent_by_index(hw, j);
+		if (!pc)
+			break;
+
+		/* if this parent is currently unused, remember it.
+		 * XXX: we would actually want clk_has_active_children()
+		 * but this is a good-enough approximation for now.
+		 */
+		if (!clk_hw_is_prepared(pc)) {
+			if (!free)
+				free = pc;
+		}
+
+		pr = clk_hw_get_rate(pc);
+		if (pr < req->rate)
+			continue;
+
+		/* what can hardware actually provide */
+		tdv = alchemy_calc_div(req->rate, pr, scale, maxdiv, NULL);
+		nr = pr / tdv;
+		diff = req->rate - nr;
+		if (nr > req->rate)
+			continue;
+
+		if (diff < lastdiff) {
+			lastdiff = diff;
+			bpr = pr;
+			bpc = pc;
+			br = nr;
+		}
+		if (diff == 0)
+			break;
+	}
+
+	/* if we couldn't get the exact rate we wanted from the enabled
+	 * parents, maybe we can tell an available disabled/inactive one
+	 * to give us a rate we can divide down to the requested rate.
+	 */
+	if (lastdiff && free) {
+		for (j = (maxdiv == 4) ? 1 : scale; j <= maxdiv; j += scale) {
+			tpr = req->rate * j;
+			if (tpr < 0)
+				break;
+			pr = clk_hw_round_rate(free, tpr);
+
+			tdv = alchemy_calc_div(req->rate, pr, scale, maxdiv,
+					       NULL);
+			nr = pr / tdv;
+			diff = req->rate - nr;
+			if (nr > req->rate)
+				continue;
+			if (diff < lastdiff) {
+				lastdiff = diff;
+				bpr = pr;
+				bpc = free;
+				br = nr;
+			}
+			if (diff == 0)
+				break;
+		}
+	}
+
+	if (br < 0)
+		return br;
+
+	req->best_parent_rate = bpr;
+	req->best_parent_hw = bpc;
+	req->rate = br;
+
+	return 0;
+}
+
+static int alchemy_clk_fgv1_en(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v, flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v |= (1 << 1) << c->shift;
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static int alchemy_clk_fgv1_isen(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v = alchemy_rdsys(c->reg) >> (c->shift + 1);
+
+	return v & 1;
+}
+
+static void alchemy_clk_fgv1_dis(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v, flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~((1 << 1) << c->shift);
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+}
+
+static int alchemy_clk_fgv1_setp(struct clk_hw *hw, u8 index)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v, flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	if (index)
+		v |= (1 << c->shift);
+	else
+		v &= ~(1 << c->shift);
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static u8 alchemy_clk_fgv1_getp(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+
+	return (alchemy_rdsys(c->reg) >> c->shift) & 1;
+}
+
+static int alchemy_clk_fgv1_setr(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long div, v, flags, ret;
+	int sh = c->shift + 2;
+
+	if (!rate || !parent_rate || rate > (parent_rate / 2))
+		return -EINVAL;
+	ret = alchemy_calc_div(rate, parent_rate, 2, 512, &div);
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~(0xff << sh);
+	v |= div << sh;
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static unsigned long alchemy_clk_fgv1_recalc(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v = alchemy_rdsys(c->reg) >> (c->shift + 2);
+
+	v = ((v & 0xff) + 1) * 2;
+	return parent_rate / v;
+}
+
+static int alchemy_clk_fgv1_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req)
+{
+	return alchemy_clk_fgcs_detr(hw, req, 2, 512);
+}
+
+/* Au1000, Au1100, Au15x0, Au12x0 */
+static const struct clk_ops alchemy_clkops_fgenv1 = {
+	.recalc_rate	= alchemy_clk_fgv1_recalc,
+	.determine_rate	= alchemy_clk_fgv1_detr,
+	.set_rate	= alchemy_clk_fgv1_setr,
+	.set_parent	= alchemy_clk_fgv1_setp,
+	.get_parent	= alchemy_clk_fgv1_getp,
+	.enable		= alchemy_clk_fgv1_en,
+	.disable	= alchemy_clk_fgv1_dis,
+	.is_enabled	= alchemy_clk_fgv1_isen,
+};
+
+static void __alchemy_clk_fgv2_en(struct alchemy_fgcs_clk *c)
+{
+	unsigned long v = alchemy_rdsys(c->reg);
+
+	v &= ~(3 << c->shift);
+	v |= (c->parent & 3) << c->shift;
+	alchemy_wrsys(v, c->reg);
+	c->isen = 1;
+}
+
+static int alchemy_clk_fgv2_en(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long flags;
+
+	/* enable by setting the previous parent clock */
+	spin_lock_irqsave(c->reglock, flags);
+	__alchemy_clk_fgv2_en(c);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static int alchemy_clk_fgv2_isen(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+
+	return ((alchemy_rdsys(c->reg) >> c->shift) & 3) != 0;
+}
+
+static void alchemy_clk_fgv2_dis(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v, flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~(3 << c->shift);	/* set input mux to "disabled" state */
+	alchemy_wrsys(v, c->reg);
+	c->isen = 0;
+	spin_unlock_irqrestore(c->reglock, flags);
+}
+
+static int alchemy_clk_fgv2_setp(struct clk_hw *hw, u8 index)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	c->parent = index + 1;	/* value to write to register */
+	if (c->isen)
+		__alchemy_clk_fgv2_en(c);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static u8 alchemy_clk_fgv2_getp(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long flags, v;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = c->parent - 1;
+	spin_unlock_irqrestore(c->reglock, flags);
+	return v;
+}
+
+/* fg0-2 and fg4-6 share a "scale"-bit. With this bit cleared, the
+ * dividers behave exactly as on previous models (dividers are multiples
+ * of 2); with the bit set, dividers are multiples of 1, halving their
+ * range, but making them also much more flexible.
+ */
+static int alchemy_clk_fgv2_setr(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	int sh = c->shift + 2;
+	unsigned long div, v, flags, ret;
+
+	if (!rate || !parent_rate || rate > parent_rate)
+		return -EINVAL;
+
+	v = alchemy_rdsys(c->reg) & (1 << 30); /* test "scale" bit */
+	ret = alchemy_calc_div(rate, parent_rate, v ? 1 : 2,
+			       v ? 256 : 512, &div);
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~(0xff << sh);
+	v |= (div & 0xff) << sh;
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static unsigned long alchemy_clk_fgv2_recalc(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	int sh = c->shift + 2;
+	unsigned long v, t;
+
+	v = alchemy_rdsys(c->reg);
+	t = parent_rate / (((v >> sh) & 0xff) + 1);
+	if ((v & (1 << 30)) == 0)		/* test scale bit */
+		t /= 2;
+
+	return t;
+}
+
+static int alchemy_clk_fgv2_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	int scale, maxdiv;
+
+	if (alchemy_rdsys(c->reg) & (1 << 30)) {
+		scale = 1;
+		maxdiv = 256;
+	} else {
+		scale = 2;
+		maxdiv = 512;
+	}
+
+	return alchemy_clk_fgcs_detr(hw, req, scale, maxdiv);
+}
+
+/* Au1300 larger input mux, no separate disable bit, flexible divider */
+static const struct clk_ops alchemy_clkops_fgenv2 = {
+	.recalc_rate	= alchemy_clk_fgv2_recalc,
+	.determine_rate	= alchemy_clk_fgv2_detr,
+	.set_rate	= alchemy_clk_fgv2_setr,
+	.set_parent	= alchemy_clk_fgv2_setp,
+	.get_parent	= alchemy_clk_fgv2_getp,
+	.enable		= alchemy_clk_fgv2_en,
+	.disable	= alchemy_clk_fgv2_dis,
+	.is_enabled	= alchemy_clk_fgv2_isen,
+};
+
+static const char * const alchemy_clk_fgv1_parents[] = {
+	ALCHEMY_CPU_CLK, ALCHEMY_AUXPLL_CLK
+};
+
+static const char * const alchemy_clk_fgv2_parents[] = {
+	ALCHEMY_AUXPLL2_CLK, ALCHEMY_CPU_CLK, ALCHEMY_AUXPLL_CLK
+};
+
+static const char * const alchemy_clk_fgen_names[] = {
+	ALCHEMY_FG0_CLK, ALCHEMY_FG1_CLK, ALCHEMY_FG2_CLK,
+	ALCHEMY_FG3_CLK, ALCHEMY_FG4_CLK, ALCHEMY_FG5_CLK };
+
+static int __init alchemy_clk_init_fgens(int ctype)
+{
+	struct clk *c;
+	struct clk_init_data id;
+	struct alchemy_fgcs_clk *a;
+	unsigned long v;
+	int i, ret;
+
+	switch (ctype) {
+	case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
+		id.ops = &alchemy_clkops_fgenv1;
+		id.parent_names = alchemy_clk_fgv1_parents;
+		id.num_parents = 2;
+		break;
+	case ALCHEMY_CPU_AU1300:
+		id.ops = &alchemy_clkops_fgenv2;
+		id.parent_names = alchemy_clk_fgv2_parents;
+		id.num_parents = 3;
+		break;
+	default:
+		return -ENODEV;
+	}
+	id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE;
+
+	a = kzalloc_objs(*a, 6);
+	if (!a)
+		return -ENOMEM;
+
+	spin_lock_init(&alchemy_clk_fg0_lock);
+	spin_lock_init(&alchemy_clk_fg1_lock);
+	ret = 0;
+	for (i = 0; i < 6; i++) {
+		id.name = alchemy_clk_fgen_names[i];
+		a->shift = 10 * (i < 3 ? i : i - 3);
+		if (i > 2) {
+			a->reg = AU1000_SYS_FREQCTRL1;
+			a->reglock = &alchemy_clk_fg1_lock;
+		} else {
+			a->reg = AU1000_SYS_FREQCTRL0;
+			a->reglock = &alchemy_clk_fg0_lock;
+		}
+
+		/* default to first parent if bootloader has set
+		 * the mux to disabled state.
+		 */
+		if (ctype == ALCHEMY_CPU_AU1300) {
+			v = alchemy_rdsys(a->reg);
+			a->parent = (v >> a->shift) & 3;
+			if (!a->parent) {
+				a->parent = 1;
+				a->isen = 0;
+			} else
+				a->isen = 1;
+		}
+
+		a->hw.init = &id;
+		c = clk_register(NULL, &a->hw);
+		if (IS_ERR(c))
+			ret++;
+		else
+			clk_register_clkdev(c, id.name, NULL);
+		a++;
+	}
+
+	return ret;
+}
+
+/* internal sources muxes *********************************************/
+
+static int alchemy_clk_csrc_isen(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v = alchemy_rdsys(c->reg);
+
+	return (((v >> c->shift) >> 2) & 7) != 0;
+}
+
+static void __alchemy_clk_csrc_en(struct alchemy_fgcs_clk *c)
+{
+	unsigned long v = alchemy_rdsys(c->reg);
+
+	v &= ~((7 << 2) << c->shift);
+	v |= ((c->parent & 7) << 2) << c->shift;
+	alchemy_wrsys(v, c->reg);
+	c->isen = 1;
+}
+
+static int alchemy_clk_csrc_en(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long flags;
+
+	/* enable by setting the previous parent clock */
+	spin_lock_irqsave(c->reglock, flags);
+	__alchemy_clk_csrc_en(c);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static void alchemy_clk_csrc_dis(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v, flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~((3 << 2) << c->shift);	/* mux to "disabled" state */
+	alchemy_wrsys(v, c->reg);
+	c->isen = 0;
+	spin_unlock_irqrestore(c->reglock, flags);
+}
+
+static int alchemy_clk_csrc_setp(struct clk_hw *hw, u8 index)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(c->reglock, flags);
+	c->parent = index + 1;	/* value to write to register */
+	if (c->isen)
+		__alchemy_clk_csrc_en(c);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static u8 alchemy_clk_csrc_getp(struct clk_hw *hw)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+
+	return c->parent - 1;
+}
+
+static unsigned long alchemy_clk_csrc_recalc(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long v = (alchemy_rdsys(c->reg) >> c->shift) & 3;
+
+	return parent_rate / c->dt[v];
+}
+
+static int alchemy_clk_csrc_setr(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	unsigned long d, v, flags;
+	int i;
+
+	if (!rate || !parent_rate || rate > parent_rate)
+		return -EINVAL;
+
+	d = (parent_rate + (rate / 2)) / rate;
+	if (d > 4)
+		return -EINVAL;
+	if ((d == 3) && (c->dt[2] != 3))
+		d = 4;
+
+	for (i = 0; i < 4; i++)
+		if (c->dt[i] == d)
+			break;
+
+	if (i >= 4)
+		return -EINVAL;	/* oops */
+
+	spin_lock_irqsave(c->reglock, flags);
+	v = alchemy_rdsys(c->reg);
+	v &= ~(3 << c->shift);
+	v |= (i & 3) << c->shift;
+	alchemy_wrsys(v, c->reg);
+	spin_unlock_irqrestore(c->reglock, flags);
+
+	return 0;
+}
+
+static int alchemy_clk_csrc_detr(struct clk_hw *hw,
+				 struct clk_rate_request *req)
+{
+	struct alchemy_fgcs_clk *c = to_fgcs_clk(hw);
+	int scale = c->dt[2] == 3 ? 1 : 2; /* au1300 check */
+
+	return alchemy_clk_fgcs_detr(hw, req, scale, 4);
+}
+
+static const struct clk_ops alchemy_clkops_csrc = {
+	.recalc_rate	= alchemy_clk_csrc_recalc,
+	.determine_rate	= alchemy_clk_csrc_detr,
+	.set_rate	= alchemy_clk_csrc_setr,
+	.set_parent	= alchemy_clk_csrc_setp,
+	.get_parent	= alchemy_clk_csrc_getp,
+	.enable		= alchemy_clk_csrc_en,
+	.disable	= alchemy_clk_csrc_dis,
+	.is_enabled	= alchemy_clk_csrc_isen,
+};
+
+static const char * const alchemy_clk_csrc_parents[] = {
+	/* disabled at index 0 */ ALCHEMY_AUXPLL_CLK,
+	ALCHEMY_FG0_CLK, ALCHEMY_FG1_CLK, ALCHEMY_FG2_CLK,
+	ALCHEMY_FG3_CLK, ALCHEMY_FG4_CLK, ALCHEMY_FG5_CLK
+};
+
+/* divider tables */
+static int alchemy_csrc_dt1[] = { 1, 4, 1, 2 };	/* rest */
+static int alchemy_csrc_dt2[] = { 1, 4, 3, 2 };	/* Au1300 */
+
+static int __init alchemy_clk_setup_imux(int ctype)
+{
+	struct alchemy_fgcs_clk *a;
+	const char * const *names;
+	struct clk_init_data id;
+	unsigned long v;
+	int i, ret, *dt;
+	struct clk *c;
+
+	id.ops = &alchemy_clkops_csrc;
+	id.parent_names = alchemy_clk_csrc_parents;
+	id.num_parents = 7;
+	id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE;
+
+	dt = alchemy_csrc_dt1;
+	switch (ctype) {
+	case ALCHEMY_CPU_AU1000:
+		names = alchemy_au1000_intclknames;
+		break;
+	case ALCHEMY_CPU_AU1500:
+		names = alchemy_au1500_intclknames;
+		break;
+	case ALCHEMY_CPU_AU1100:
+		names = alchemy_au1100_intclknames;
+		break;
+	case ALCHEMY_CPU_AU1550:
+		names = alchemy_au1550_intclknames;
+		break;
+	case ALCHEMY_CPU_AU1200:
+		names = alchemy_au1200_intclknames;
+		break;
+	case ALCHEMY_CPU_AU1300:
+		dt = alchemy_csrc_dt2;
+		names = alchemy_au1300_intclknames;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	a = kzalloc_objs(*a, 6);
+	if (!a)
+		return -ENOMEM;
+
+	ret = 0;
+
+	for (i = 0; i < 6; i++) {
+		id.name = names[i];
+		if (!id.name)
+			goto next;
+
+		a->shift = i * 5;
+		a->reg = AU1000_SYS_CLKSRC;
+		a->reglock = &alchemy_clk_csrc_lock;
+		a->dt = dt;
+
+		/* default to first parent clock if mux is initially
+		 * set to disabled state.
+		 */
+		v = alchemy_rdsys(a->reg);
+		a->parent = ((v >> a->shift) >> 2) & 7;
+		if (!a->parent) {
+			a->parent = 1;
+			a->isen = 0;
+		} else
+			a->isen = 1;
+
+		a->hw.init = &id;
+		c = clk_register(NULL, &a->hw);
+		if (IS_ERR(c))
+			ret++;
+		else
+			clk_register_clkdev(c, id.name, NULL);
+next:
+		a++;
+	}
+
+	return ret;
+}
+
+
+/**********************************************************************/
+
+
+#define ERRCK(x)						\
+	if (IS_ERR(x)) {					\
+		ret = PTR_ERR(x);				\
+		goto out;					\
+	}
+
+static int __init alchemy_clk_init(void)
+{
+	int ctype = alchemy_get_cputype(), ret, i;
+	struct clk_aliastable *t = alchemy_clk_aliases;
+	struct clk *c;
+
+	/* Root of the Alchemy clock tree: external 12MHz crystal osc */
+	c = clk_register_fixed_rate(NULL, ALCHEMY_ROOT_CLK, NULL,
+					   0, ALCHEMY_ROOTCLK_RATE);
+	ERRCK(c)
+
+	/* CPU core clock */
+	c = alchemy_clk_setup_cpu(ALCHEMY_ROOT_CLK, ctype);
+	ERRCK(c)
+
+	/* AUXPLLs: max 1GHz on Au1300, 748MHz on older models */
+	i = (ctype == ALCHEMY_CPU_AU1300) ? 84 : 63;
+	c = alchemy_clk_setup_aux(ALCHEMY_ROOT_CLK, ALCHEMY_AUXPLL_CLK,
+				  i, AU1000_SYS_AUXPLL);
+	ERRCK(c)
+
+	if (ctype == ALCHEMY_CPU_AU1300) {
+		c = alchemy_clk_setup_aux(ALCHEMY_ROOT_CLK,
+					  ALCHEMY_AUXPLL2_CLK, i,
+					  AU1300_SYS_AUXPLL2);
+		ERRCK(c)
+	}
+
+	/* sysbus clock: cpu core clock divided by 2, 3 or 4 */
+	c = alchemy_clk_setup_sysbus(ALCHEMY_CPU_CLK);
+	ERRCK(c)
+
+	/* peripheral clock: runs at half rate of sysbus clk */
+	c = alchemy_clk_setup_periph(ALCHEMY_SYSBUS_CLK);
+	ERRCK(c)
+
+	/* SDR/DDR memory clock */
+	c = alchemy_clk_setup_mem(ALCHEMY_SYSBUS_CLK, ctype);
+	ERRCK(c)
+
+	/* L/RCLK: external static bus clock for synchronous mode */
+	c = alchemy_clk_setup_lrclk(ALCHEMY_PERIPH_CLK, ctype);
+	ERRCK(c)
+
+	/* Frequency dividers 0-5 */
+	ret = alchemy_clk_init_fgens(ctype);
+	if (ret) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* diving muxes for internal sources */
+	ret = alchemy_clk_setup_imux(ctype);
+	if (ret) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* set up aliases drivers might look for */
+	while (t->base) {
+		if (t->cputype == ctype)
+			clk_add_alias(t->alias, NULL, t->base, NULL);
+		t++;
+	}
+
+	pr_info("Alchemy clocktree installed\n");
+	return 0;
+
+out:
+	return ret;
+}
+postcore_initcall(alchemy_clk_init);
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
new file mode 100644
index 000000000..b441d6f3f
--- /dev/null
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -0,0 +1,1096 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *      The Descriptor Based DMA channel manager that first appeared
+ *	on the Au1550.  I started with dma.c, but I think all that is
+ *	left is this initial comment :-)
+ *
+ * Copyright 2004 Embedded Edge, LLC
+ *	dan@embeddededge.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/dma-map-ops.h> /* for dma_default_coherent */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/export.h>
+#include <linux/syscore_ops.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+
+/*
+ * The Descriptor Based DMA supports up to 16 channels.
+ *
+ * There are 32 devices defined. We keep an internal structure
+ * of devices using these channels, along with additional
+ * information.
+ *
+ * We allocate the descriptors and allow access to them through various
+ * functions.  The drivers allocate the data buffers and assign them
+ * to the descriptors.
+ */
+static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
+
+/* I couldn't find a macro that did this... */
+#define ALIGN_ADDR(x, a)	((((u32)(x)) + (a-1)) & ~(a-1))
+
+static dbdma_global_t *dbdma_gptr =
+			(dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+static int dbdma_initialized;
+
+static dbdev_tab_t *dbdev_tab;
+
+static dbdev_tab_t au1550_dbdev_tab[] __initdata = {
+	/* UARTS */
+	{ AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
+	{ AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN,  0, 8, 0x11100000, 0, 0 },
+	{ AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
+	{ AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN,  0, 8, 0x11400000, 0, 0 },
+
+	/* EXT DMA */
+	{ AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
+
+	/* USB DEV */
+	{ AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN,  4, 8, 0x10200000, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN,  4, 8, 0x10200010, 0, 0 },
+	{ AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN,  4, 8, 0x10200014, 0, 0 },
+
+	/* PSCs */
+	{ AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN,  0, 0, 0x11a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN,  0, 0, 0x11b0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN,  0, 0, 0x10a0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
+	{ AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN,  0, 0, 0x10b0001c, 0, 0 },
+
+	{ AU1550_DSCR_CMD0_PCI_WRITE,  0, 0, 0, 0x00000000, 0, 0 },  /* PCI */
+	{ AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */
+
+	/* MAC 0 */
+	{ AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN,  0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
+
+	/* MAC 1 */
+	{ AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN,  0, 0, 0x00000000, 0, 0 },
+	{ AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
+
+	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
+
+static dbdev_tab_t au1200_dbdev_tab[] __initdata = {
+	{ AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
+	{ AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN,  0, 8, 0x11100000, 0, 0 },
+	{ AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
+	{ AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN,  0, 8, 0x11200000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
+	{ AU1200_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN,  4, 8, 0x10600004, 0, 0 },
+	{ AU1200_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
+	{ AU1200_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN,  4, 8, 0x10680004, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
+	{ AU1200_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_PSC0_TX,   DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC0_RX,   DEV_FLAGS_IN,  0, 16, 0x11a0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC1_TX,   DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC1_RX,   DEV_FLAGS_IN,  0, 16, 0x11b0001c, 0, 0 },
+	{ AU1200_DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_CIM_RXA,  DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
+	{ AU1200_DSCR_CMD0_CIM_RXB,  DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
+	{ AU1200_DSCR_CMD0_CIM_RXC,  DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
+	{ AU1200_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1200_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+
+	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
+
+static dbdev_tab_t au1300_dbdev_tab[] __initdata = {
+	{ AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8,  0x10100004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN,  0, 8,  0x10100000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8,  0x10101004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN,  0, 8,  0x10101000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8,  0x10102004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN,  0, 8,  0x10102000, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8,  0x10103004, 0, 0 },
+	{ AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN,  0, 8,  0x10103000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8,  0x10600000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN,  4, 8,  0x10600004, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8,  0x10601000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN,  8, 8,  0x10601004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN ,   4, 32, 0x10300008, 0, 0 },
+	{ AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT,   4, 32, 0x10300004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0001c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN,   0, 16, 0x10a0001c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0101c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN,   0, 16, 0x10a0101c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0201c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN,   0, 16, 0x10a0201c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT,  0, 16, 0x10a0301c, 0, 0 },
+	{ AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN,   0, 16, 0x10a0301c, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE,   0, 0,  0x00000000, 0, 0 },
+	{ AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8,  0x10602000, 0, 0 },
+	{ AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN,  4, 8,  0x10602004, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE,  0, 32, 0x14001810, 0, 0 },
+
+	{ AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+	{ AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+
+	{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+	{ DSCR_CMD0_ALWAYS,   DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
+
+/* 32 predefined plus 32 custom */
+#define DBDEV_TAB_SIZE		64
+
+static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
+
+static dbdev_tab_t *find_dbdev_id(u32 id)
+{
+	int i;
+	dbdev_tab_t *p;
+	for (i = 0; i < DBDEV_TAB_SIZE; ++i) {
+		p = &dbdev_tab[i];
+		if (p->dev_id == id)
+			return p;
+	}
+	return NULL;
+}
+
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+{
+	return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+}
+EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
+
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
+{
+	u32 ret = 0;
+	dbdev_tab_t *p;
+	static u16 new_id = 0x1000;
+
+	p = find_dbdev_id(~0);
+	if (NULL != p) {
+		memcpy(p, dev, sizeof(dbdev_tab_t));
+		p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
+		ret = p->dev_id;
+		new_id++;
+#if 0
+		printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
+				  p->dev_id, p->dev_flags, p->dev_physaddr);
+#endif
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(au1xxx_ddma_add_device);
+
+void au1xxx_ddma_del_device(u32 devid)
+{
+	dbdev_tab_t *p = find_dbdev_id(devid);
+
+	if (p != NULL) {
+		memset(p, 0, sizeof(dbdev_tab_t));
+		p->dev_id = ~0;
+	}
+}
+EXPORT_SYMBOL(au1xxx_ddma_del_device);
+
+/* Allocate a channel and return a non-zero descriptor if successful. */
+u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+       void (*callback)(int, void *), void *callparam)
+{
+	unsigned long	flags;
+	u32		used, chan;
+	u32		dcp;
+	int		i;
+	dbdev_tab_t	*stp, *dtp;
+	chan_tab_t	*ctp;
+	au1x_dma_chan_t *cp;
+
+	/*
+	 * We do the initialization on the first channel allocation.
+	 * We have to wait because of the interrupt handler initialization
+	 * which can't be done successfully during board set up.
+	 */
+	if (!dbdma_initialized)
+		return 0;
+
+	stp = find_dbdev_id(srcid);
+	if (stp == NULL)
+		return 0;
+	dtp = find_dbdev_id(destid);
+	if (dtp == NULL)
+		return 0;
+
+	used = 0;
+
+	/* Check to see if we can get both channels. */
+	spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
+	if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
+	     (stp->dev_flags & DEV_FLAGS_ANYUSE)) {
+		/* Got source */
+		stp->dev_flags |= DEV_FLAGS_INUSE;
+		if (!(dtp->dev_flags & DEV_FLAGS_INUSE) ||
+		     (dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
+			/* Got destination */
+			dtp->dev_flags |= DEV_FLAGS_INUSE;
+		} else {
+			/* Can't get dest.  Release src. */
+			stp->dev_flags &= ~DEV_FLAGS_INUSE;
+			used++;
+		}
+	} else
+		used++;
+	spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
+
+	if (used)
+		return 0;
+
+	/* Let's see if we can allocate a channel for it. */
+	ctp = NULL;
+	chan = 0;
+	spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
+	for (i = 0; i < NUM_DBDMA_CHANS; i++)
+		if (chan_tab_ptr[i] == NULL) {
+			/*
+			 * If kmalloc fails, it is caught below same
+			 * as a channel not available.
+			 */
+			ctp = kmalloc_obj(chan_tab_t, GFP_ATOMIC);
+			chan_tab_ptr[i] = ctp;
+			break;
+		}
+	spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
+
+	if (ctp != NULL) {
+		memset(ctp, 0, sizeof(chan_tab_t));
+		ctp->chan_index = chan = i;
+		dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+		dcp += (0x0100 * chan);
+		ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
+		cp = (au1x_dma_chan_t *)dcp;
+		ctp->chan_src = stp;
+		ctp->chan_dest = dtp;
+		ctp->chan_callback = callback;
+		ctp->chan_callparam = callparam;
+
+		/* Initialize channel configuration. */
+		i = 0;
+		if (stp->dev_intlevel)
+			i |= DDMA_CFG_SED;
+		if (stp->dev_intpolarity)
+			i |= DDMA_CFG_SP;
+		if (dtp->dev_intlevel)
+			i |= DDMA_CFG_DED;
+		if (dtp->dev_intpolarity)
+			i |= DDMA_CFG_DP;
+		if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+			(dtp->dev_flags & DEV_FLAGS_SYNC))
+				i |= DDMA_CFG_SYNC;
+		cp->ddma_cfg = i;
+		wmb(); /* drain writebuffer */
+
+		/*
+		 * Return a non-zero value that can be used to find the channel
+		 * information in subsequent operations.
+		 */
+		return (u32)(&chan_tab_ptr[chan]);
+	}
+
+	/* Release devices */
+	stp->dev_flags &= ~DEV_FLAGS_INUSE;
+	dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+
+	return 0;
+}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
+
+/*
+ * Set the device width if source or destination is a FIFO.
+ * Should be 8, 16, or 32 bits.
+ */
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
+{
+	u32		rv;
+	chan_tab_t	*ctp;
+	dbdev_tab_t	*stp, *dtp;
+
+	ctp = *((chan_tab_t **)chanid);
+	stp = ctp->chan_src;
+	dtp = ctp->chan_dest;
+	rv = 0;
+
+	if (stp->dev_flags & DEV_FLAGS_IN) {	/* Source in fifo */
+		rv = stp->dev_devwidth;
+		stp->dev_devwidth = bits;
+	}
+	if (dtp->dev_flags & DEV_FLAGS_OUT) {	/* Destination out fifo */
+		rv = dtp->dev_devwidth;
+		dtp->dev_devwidth = bits;
+	}
+
+	return rv;
+}
+EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
+
+/* Allocate a descriptor ring, initializing as much as possible. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
+{
+	int			i;
+	u32			desc_base, srcid, destid;
+	u32			cmd0, cmd1, src1, dest1;
+	u32			src0, dest0;
+	chan_tab_t		*ctp;
+	dbdev_tab_t		*stp, *dtp;
+	au1x_ddma_desc_t	*dp;
+
+	/*
+	 * I guess we could check this to be within the
+	 * range of the table......
+	 */
+	ctp = *((chan_tab_t **)chanid);
+	stp = ctp->chan_src;
+	dtp = ctp->chan_dest;
+
+	/*
+	 * The descriptors must be 32-byte aligned.  There is a
+	 * possibility the allocation will give us such an address,
+	 * and if we try that first we are likely to not waste larger
+	 * slabs of memory.
+	 */
+	desc_base = (u32) kmalloc_objs(au1x_ddma_desc_t, entries,
+				       GFP_KERNEL | GFP_DMA);
+	if (desc_base == 0)
+		return 0;
+
+	if (desc_base & 0x1f) {
+		/*
+		 * Lost....do it again, allocate extra, and round
+		 * the address base.
+		 */
+		kfree((const void *)desc_base);
+		i = entries * sizeof(au1x_ddma_desc_t);
+		i += (sizeof(au1x_ddma_desc_t) - 1);
+		desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA);
+		if (desc_base == 0)
+			return 0;
+
+		ctp->cdb_membase = desc_base;
+		desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
+	} else
+		ctp->cdb_membase = desc_base;
+
+	dp = (au1x_ddma_desc_t *)desc_base;
+
+	/* Keep track of the base descriptor. */
+	ctp->chan_desc_base = dp;
+
+	/* Initialize the rings with as much information as we know. */
+	srcid = stp->dev_id;
+	destid = dtp->dev_id;
+
+	cmd0 = cmd1 = src1 = dest1 = 0;
+	src0 = dest0 = 0;
+
+	cmd0 |= DSCR_CMD0_SID(srcid);
+	cmd0 |= DSCR_CMD0_DID(destid);
+	cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
+	cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
+
+	/* Is it mem to mem transfer? */
+	if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) ||
+	     (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
+	    ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) ||
+	     (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS)))
+		cmd0 |= DSCR_CMD0_MEM;
+
+	switch (stp->dev_devwidth) {
+	case 8:
+		cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_BYTE);
+		break;
+	case 16:
+		cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_HALFWORD);
+		break;
+	case 32:
+	default:
+		cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_WORD);
+		break;
+	}
+
+	switch (dtp->dev_devwidth) {
+	case 8:
+		cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_BYTE);
+		break;
+	case 16:
+		cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_HALFWORD);
+		break;
+	case 32:
+	default:
+		cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_WORD);
+		break;
+	}
+
+	/*
+	 * If the device is marked as an in/out FIFO, ensure it is
+	 * set non-coherent.
+	 */
+	if (stp->dev_flags & DEV_FLAGS_IN)
+		cmd0 |= DSCR_CMD0_SN;		/* Source in FIFO */
+	if (dtp->dev_flags & DEV_FLAGS_OUT)
+		cmd0 |= DSCR_CMD0_DN;		/* Destination out FIFO */
+
+	/*
+	 * Set up source1.  For now, assume no stride and increment.
+	 * A channel attribute update can change this later.
+	 */
+	switch (stp->dev_tsize) {
+	case 1:
+		src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE1);
+		break;
+	case 2:
+		src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE2);
+		break;
+	case 4:
+		src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE4);
+		break;
+	case 8:
+	default:
+		src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE8);
+		break;
+	}
+
+	/* If source input is FIFO, set static address. */
+	if (stp->dev_flags & DEV_FLAGS_IN) {
+		if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
+			src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
+		else
+			src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
+	}
+
+	if (stp->dev_physaddr)
+		src0 = stp->dev_physaddr;
+
+	/*
+	 * Set up dest1.  For now, assume no stride and increment.
+	 * A channel attribute update can change this later.
+	 */
+	switch (dtp->dev_tsize) {
+	case 1:
+		dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE1);
+		break;
+	case 2:
+		dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE2);
+		break;
+	case 4:
+		dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE4);
+		break;
+	case 8:
+	default:
+		dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE8);
+		break;
+	}
+
+	/* If destination output is FIFO, set static address. */
+	if (dtp->dev_flags & DEV_FLAGS_OUT) {
+		if (dtp->dev_flags & DEV_FLAGS_BURSTABLE)
+			dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+		else
+			dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
+	}
+
+	if (dtp->dev_physaddr)
+		dest0 = dtp->dev_physaddr;
+
+#if 0
+		printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
+				  "source1:%x dest0:%x dest1:%x\n",
+				  dtp->dev_id, stp->dev_id, cmd0, cmd1, src0,
+				  src1, dest0, dest1);
+#endif
+	for (i = 0; i < entries; i++) {
+		dp->dscr_cmd0 = cmd0;
+		dp->dscr_cmd1 = cmd1;
+		dp->dscr_source0 = src0;
+		dp->dscr_source1 = src1;
+		dp->dscr_dest0 = dest0;
+		dp->dscr_dest1 = dest1;
+		dp->dscr_stat = 0;
+		dp->sw_context = 0;
+		dp->sw_status = 0;
+		dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
+		dp++;
+	}
+
+	/* Make last descriptor point to the first. */
+	dp--;
+	dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
+	ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
+
+	return (u32)ctp->chan_desc_base;
+}
+EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
+
+/*
+ * Put a source buffer into the DMA ring.
+ * This updates the source pointer and byte count.  Normally used
+ * for memory to fifo transfers.
+ */
+u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
+{
+	chan_tab_t		*ctp;
+	au1x_ddma_desc_t	*dp;
+
+	/*
+	 * I guess we could check this to be within the
+	 * range of the table......
+	 */
+	ctp = *(chan_tab_t **)chanid;
+
+	/*
+	 * We should have multiple callers for a particular channel,
+	 * an interrupt doesn't affect this pointer nor the descriptor,
+	 * so no locking should be needed.
+	 */
+	dp = ctp->put_ptr;
+
+	/*
+	 * If the descriptor is valid, we are way ahead of the DMA
+	 * engine, so just return an error condition.
+	 */
+	if (dp->dscr_cmd0 & DSCR_CMD0_V)
+		return 0;
+
+	/* Load up buffer address and byte count. */
+	dp->dscr_source0 = buf & ~0UL;
+	dp->dscr_cmd1 = nbytes;
+	/* Check flags */
+	if (flags & DDMA_FLAGS_IE)
+		dp->dscr_cmd0 |= DSCR_CMD0_IE;
+	if (flags & DDMA_FLAGS_NOIE)
+		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
+	/*
+	 * There is an erratum on certain Au1200/Au1550 revisions that could
+	 * result in "stale" data being DMA'ed. It has to do with the snoop
+	 * logic on the cache eviction buffer.  dma_default_coherent is set
+	 * to false on these parts.
+	 */
+	if (!dma_default_coherent)
+		dma_cache_wback_inv(KSEG0ADDR(buf), nbytes);
+	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
+	wmb(); /* drain writebuffer */
+	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
+	ctp->chan_ptr->ddma_dbell = 0;
+	wmb(); /* force doorbell write out to dma engine */
+
+	/* Get next descriptor pointer. */
+	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+	/* Return something non-zero. */
+	return nbytes;
+}
+EXPORT_SYMBOL(au1xxx_dbdma_put_source);
+
+/* Put a destination buffer into the DMA ring.
+ * This updates the destination pointer and byte count.  Normally used
+ * to place an empty buffer into the ring for fifo to memory transfers.
+ */
+u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
+{
+	chan_tab_t		*ctp;
+	au1x_ddma_desc_t	*dp;
+
+	/* I guess we could check this to be within the
+	 * range of the table......
+	 */
+	ctp = *((chan_tab_t **)chanid);
+
+	/* We should have multiple callers for a particular channel,
+	 * an interrupt doesn't affect this pointer nor the descriptor,
+	 * so no locking should be needed.
+	 */
+	dp = ctp->put_ptr;
+
+	/* If the descriptor is valid, we are way ahead of the DMA
+	 * engine, so just return an error condition.
+	 */
+	if (dp->dscr_cmd0 & DSCR_CMD0_V)
+		return 0;
+
+	/* Load up buffer address and byte count */
+
+	/* Check flags  */
+	if (flags & DDMA_FLAGS_IE)
+		dp->dscr_cmd0 |= DSCR_CMD0_IE;
+	if (flags & DDMA_FLAGS_NOIE)
+		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
+	dp->dscr_dest0 = buf & ~0UL;
+	dp->dscr_cmd1 = nbytes;
+#if 0
+	printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+			  dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+			  dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
+#endif
+	/*
+	 * There is an erratum on certain Au1200/Au1550 revisions that could
+	 * result in "stale" data being DMA'ed. It has to do with the snoop
+	 * logic on the cache eviction buffer.  dma_default_coherent is set
+	 * to false on these parts.
+	 */
+	if (!dma_default_coherent)
+		dma_cache_inv(KSEG0ADDR(buf), nbytes);
+	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
+	wmb(); /* drain writebuffer */
+	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
+	ctp->chan_ptr->ddma_dbell = 0;
+	wmb(); /* force doorbell write out to dma engine */
+
+	/* Get next descriptor pointer. */
+	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+	/* Return something non-zero. */
+	return nbytes;
+}
+EXPORT_SYMBOL(au1xxx_dbdma_put_dest);
+
+/*
+ * Get a destination buffer into the DMA ring.
+ * Normally used to get a full buffer from the ring during fifo
+ * to memory transfers.  This does not set the valid bit, you will
+ * have to put another destination buffer to keep the DMA going.
+ */
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
+{
+	chan_tab_t		*ctp;
+	au1x_ddma_desc_t	*dp;
+	u32			rv;
+
+	/*
+	 * I guess we could check this to be within the
+	 * range of the table......
+	 */
+	ctp = *((chan_tab_t **)chanid);
+
+	/*
+	 * We should have multiple callers for a particular channel,
+	 * an interrupt doesn't affect this pointer nor the descriptor,
+	 * so no locking should be needed.
+	 */
+	dp = ctp->get_ptr;
+
+	/*
+	 * If the descriptor is valid, we are way ahead of the DMA
+	 * engine, so just return an error condition.
+	 */
+	if (dp->dscr_cmd0 & DSCR_CMD0_V)
+		return 0;
+
+	/* Return buffer address and byte count. */
+	*buf = (void *)(phys_to_virt(dp->dscr_dest0));
+	*nbytes = dp->dscr_cmd1;
+	rv = dp->dscr_stat;
+
+	/* Get next descriptor pointer. */
+	ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+	/* Return something non-zero. */
+	return rv;
+}
+EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
+
+void au1xxx_dbdma_stop(u32 chanid)
+{
+	chan_tab_t	*ctp;
+	au1x_dma_chan_t *cp;
+	int halt_timeout = 0;
+
+	ctp = *((chan_tab_t **)chanid);
+
+	cp = ctp->chan_ptr;
+	cp->ddma_cfg &= ~DDMA_CFG_EN;	/* Disable channel */
+	wmb(); /* drain writebuffer */
+	while (!(cp->ddma_stat & DDMA_STAT_H)) {
+		udelay(1);
+		halt_timeout++;
+		if (halt_timeout > 100) {
+			printk(KERN_WARNING "warning: DMA channel won't halt\n");
+			break;
+		}
+	}
+	/* clear current desc valid and doorbell */
+	cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
+	wmb(); /* drain writebuffer */
+}
+EXPORT_SYMBOL(au1xxx_dbdma_stop);
+
+/*
+ * Start using the current descriptor pointer.  If the DBDMA encounters
+ * a non-valid descriptor, it will stop.  In this case, we can just
+ * continue by adding a buffer to the list and starting again.
+ */
+void au1xxx_dbdma_start(u32 chanid)
+{
+	chan_tab_t	*ctp;
+	au1x_dma_chan_t *cp;
+
+	ctp = *((chan_tab_t **)chanid);
+	cp = ctp->chan_ptr;
+	cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
+	cp->ddma_cfg |= DDMA_CFG_EN;	/* Enable channel */
+	wmb(); /* drain writebuffer */
+	cp->ddma_dbell = 0;
+	wmb(); /* drain writebuffer */
+}
+EXPORT_SYMBOL(au1xxx_dbdma_start);
+
+void au1xxx_dbdma_reset(u32 chanid)
+{
+	chan_tab_t		*ctp;
+	au1x_ddma_desc_t	*dp;
+
+	au1xxx_dbdma_stop(chanid);
+
+	ctp = *((chan_tab_t **)chanid);
+	ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
+
+	/* Run through the descriptors and reset the valid indicator. */
+	dp = ctp->chan_desc_base;
+
+	do {
+		dp->dscr_cmd0 &= ~DSCR_CMD0_V;
+		/*
+		 * Reset our software status -- this is used to determine
+		 * if a descriptor is in use by upper level software. Since
+		 * posting can reset 'V' bit.
+		 */
+		dp->sw_status = 0;
+		dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+	} while (dp != ctp->chan_desc_base);
+}
+EXPORT_SYMBOL(au1xxx_dbdma_reset);
+
+u32 au1xxx_get_dma_residue(u32 chanid)
+{
+	chan_tab_t	*ctp;
+	au1x_dma_chan_t *cp;
+	u32		rv;
+
+	ctp = *((chan_tab_t **)chanid);
+	cp = ctp->chan_ptr;
+
+	/* This is only valid if the channel is stopped. */
+	rv = cp->ddma_bytecnt;
+	wmb(); /* drain writebuffer */
+
+	return rv;
+}
+EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
+
+void au1xxx_dbdma_chan_free(u32 chanid)
+{
+	chan_tab_t	*ctp;
+	dbdev_tab_t	*stp, *dtp;
+
+	ctp = *((chan_tab_t **)chanid);
+	stp = ctp->chan_src;
+	dtp = ctp->chan_dest;
+
+	au1xxx_dbdma_stop(chanid);
+
+	kfree((void *)ctp->cdb_membase);
+
+	stp->dev_flags &= ~DEV_FLAGS_INUSE;
+	dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+	chan_tab_ptr[ctp->chan_index] = NULL;
+
+	kfree(ctp);
+}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
+
+static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
+{
+	u32 intstat;
+	u32 chan_index;
+	chan_tab_t		*ctp;
+	au1x_ddma_desc_t	*dp;
+	au1x_dma_chan_t *cp;
+
+	intstat = dbdma_gptr->ddma_intstat;
+	wmb(); /* drain writebuffer */
+	chan_index = __ffs(intstat);
+
+	ctp = chan_tab_ptr[chan_index];
+	cp = ctp->chan_ptr;
+	dp = ctp->cur_ptr;
+
+	/* Reset interrupt. */
+	cp->ddma_irq = 0;
+	wmb(); /* drain writebuffer */
+
+	if (ctp->chan_callback)
+		ctp->chan_callback(irq, ctp->chan_callparam);
+
+	ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+	return IRQ_RETVAL(1);
+}
+
+void au1xxx_dbdma_dump(u32 chanid)
+{
+	chan_tab_t	 *ctp;
+	au1x_ddma_desc_t *dp;
+	dbdev_tab_t	 *stp, *dtp;
+	au1x_dma_chan_t	 *cp;
+	u32 i		 = 0;
+
+	ctp = *((chan_tab_t **)chanid);
+	stp = ctp->chan_src;
+	dtp = ctp->chan_dest;
+	cp = ctp->chan_ptr;
+
+	printk(KERN_DEBUG "Chan %x, stp %x (dev %d)  dtp %x (dev %d)\n",
+			  (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
+			  dtp - dbdev_tab);
+	printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
+			  (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
+			  (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
+
+	printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
+	printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
+			  cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
+	printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
+			  cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat,
+			  cp->ddma_bytecnt);
+
+	/* Run through the descriptors */
+	dp = ctp->chan_desc_base;
+
+	do {
+		printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+				  i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+		printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+				  dp->dscr_source0, dp->dscr_source1,
+				  dp->dscr_dest0, dp->dscr_dest1);
+		printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
+				  dp->dscr_stat, dp->dscr_nxtptr);
+		dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+	} while (dp != ctp->chan_desc_base);
+}
+
+/* Put a descriptor into the DMA ring.
+ * This updates the source/destination pointers and byte count.
+ */
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
+{
+	chan_tab_t *ctp;
+	au1x_ddma_desc_t *dp;
+	u32 nbytes = 0;
+
+	/*
+	 * I guess we could check this to be within the
+	 * range of the table......
+	 */
+	ctp = *((chan_tab_t **)chanid);
+
+	/*
+	 * We should have multiple callers for a particular channel,
+	 * an interrupt doesn't affect this pointer nor the descriptor,
+	 * so no locking should be needed.
+	 */
+	dp = ctp->put_ptr;
+
+	/*
+	 * If the descriptor is valid, we are way ahead of the DMA
+	 * engine, so just return an error condition.
+	 */
+	if (dp->dscr_cmd0 & DSCR_CMD0_V)
+		return 0;
+
+	/* Load up buffer addresses and byte count. */
+	dp->dscr_dest0 = dscr->dscr_dest0;
+	dp->dscr_source0 = dscr->dscr_source0;
+	dp->dscr_dest1 = dscr->dscr_dest1;
+	dp->dscr_source1 = dscr->dscr_source1;
+	dp->dscr_cmd1 = dscr->dscr_cmd1;
+	nbytes = dscr->dscr_cmd1;
+	/* Allow the caller to specify if an interrupt is generated */
+	dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+	dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
+	ctp->chan_ptr->ddma_dbell = 0;
+
+	/* Get next descriptor pointer. */
+	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+	/* Return something non-zero. */
+	return nbytes;
+}
+
+
+static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6];
+
+static int alchemy_dbdma_suspend(void *data)
+{
+	int i;
+	void __iomem *addr;
+
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00);
+	alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04);
+	alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08);
+	alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c);
+
+	/* save channel configurations */
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+	for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+		alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00);
+		alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04);
+		alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08);
+		alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c);
+		alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10);
+		alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14);
+
+		/* halt channel */
+		__raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00);
+		wmb();
+		while (!(__raw_readl(addr + 0x14) & 1))
+			wmb();
+
+		addr += 0x100;	/* next channel base */
+	}
+	/* disable channel interrupts */
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	__raw_writel(0, addr + 0x0c);
+	wmb();
+
+	return 0;
+}
+
+static void alchemy_dbdma_resume(void *data)
+{
+	int i;
+	void __iomem *addr;
+
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
+	__raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00);
+	__raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04);
+	__raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08);
+	__raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c);
+
+	/* restore channel configurations */
+	addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
+	for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
+		__raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00);
+		__raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04);
+		__raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08);
+		__raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c);
+		__raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10);
+		__raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14);
+		wmb();
+		addr += 0x100;	/* next channel base */
+	}
+}
+
+static const struct syscore_ops alchemy_dbdma_syscore_ops = {
+	.suspend	= alchemy_dbdma_suspend,
+	.resume		= alchemy_dbdma_resume,
+};
+
+static struct syscore alchemy_dbdma_syscore = {
+	.ops = &alchemy_dbdma_syscore_ops,
+};
+
+static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
+{
+	int ret;
+
+	dbdev_tab = kzalloc_objs(dbdev_tab_t, DBDEV_TAB_SIZE);
+	if (!dbdev_tab)
+		return -ENOMEM;
+
+	memcpy(dbdev_tab, idtable, 32 * sizeof(dbdev_tab_t));
+	for (ret = 32; ret < DBDEV_TAB_SIZE; ret++)
+		dbdev_tab[ret].dev_id = ~0;
+
+	dbdma_gptr->ddma_config = 0;
+	dbdma_gptr->ddma_throttle = 0;
+	dbdma_gptr->ddma_inten = 0xffff;
+	wmb(); /* drain writebuffer */
+
+	ret = request_irq(irq, dbdma_interrupt, 0, "dbdma", (void *)dbdma_gptr);
+	if (ret)
+		printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
+	else {
+		dbdma_initialized = 1;
+		register_syscore(&alchemy_dbdma_syscore);
+	}
+
+	return ret;
+}
+
+static int __init alchemy_dbdma_init(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1550:
+		return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab);
+	case ALCHEMY_CPU_AU1200:
+		return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab);
+	case ALCHEMY_CPU_AU1300:
+		return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab);
+	}
+	return 0;
+}
+subsys_initcall(alchemy_dbdma_init);
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
new file mode 100644
index 000000000..44d8433b1
--- /dev/null
+++ b/arch/mips/alchemy/common/dma.c
@@ -0,0 +1,242 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *      A DMA channel allocator for Au1x00. API is modeled loosely off of
+ *      linux/kernel/dma.c.
+ *
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1000_dma.h>
+
+/*
+ * A note on resource allocation:
+ *
+ * All drivers needing DMA channels, should allocate and release them
+ * through the public routines `request_dma()' and `free_dma()'.
+ *
+ * In order to avoid problems, all processes should allocate resources in
+ * the same sequence and release them in the reverse order.
+ *
+ * So, when allocating DMAs and IRQs, first allocate the DMA, then the IRQ.
+ * When releasing them, first release the IRQ, then release the DMA. The
+ * main reason for this order is that, if you are requesting the DMA buffer
+ * done interrupt, you won't know the irq number until the DMA channel is
+ * returned from request_dma.
+ */
+
+/* DMA Channel register block spacing */
+#define DMA_CHANNEL_LEN		0x00000100
+
+DEFINE_SPINLOCK(au1000_dma_spin_lock);
+
+struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,},
+      {.dev_id = -1,}
+};
+EXPORT_SYMBOL(au1000_dma_table);
+
+/* Device FIFO addresses and default DMA modes */
+static const struct dma_dev {
+	unsigned int fifo_addr;
+	unsigned int dma_mode;
+} dma_dev_table[DMA_NUM_DEV] = {
+	{ AU1000_UART0_PHYS_ADDR + 0x04, DMA_DW8 },		/* UART0_TX */
+	{ AU1000_UART0_PHYS_ADDR + 0x00, DMA_DW8 | DMA_DR },	/* UART0_RX */
+	{ 0, 0 },	/* DMA_REQ0 */
+	{ 0, 0 },	/* DMA_REQ1 */
+	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 },		/* AC97 TX c */
+	{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR },	/* AC97 RX c */
+	{ AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC },	/* UART3_TX */
+	{ AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+	{ AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+	/* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
+	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC},	/* I2S TX */
+	{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
+};
+
+int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
+			 int length, int *eof, void *data)
+{
+	int i, len = 0;
+	struct dma_chan *chan;
+
+	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
+		chan = get_dma_chan(i);
+		if (chan != NULL)
+			len += sprintf(buf + len, "%2d: %s\n",
+				       i, chan->dev_str);
+	}
+
+	if (fpos >= len) {
+		*start = buf;
+		*eof = 1;
+		return 0;
+	}
+	*start = buf + fpos;
+	len -= fpos;
+	if (len > length)
+		return length;
+	*eof = 1;
+	return len;
+}
+
+/* Device FIFO addresses and default DMA modes - 2nd bank */
+static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
+	{ AU1100_SD0_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 },		/* coherent */
+	{ AU1100_SD0_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR },	/* coherent */
+	{ AU1100_SD1_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 },		/* coherent */
+	{ AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }	/* coherent */
+};
+
+/*
+ * Finds a free channel, and binds the requested device to it.
+ * Returns the allocated channel number, or negative on error.
+ * Requests the DMA done IRQ if irqhandler != NULL.
+ */
+int request_au1000_dma(int dev_id, const char *dev_str,
+		       irq_handler_t irqhandler,
+		       unsigned long irqflags,
+		       void *irq_dev_id)
+{
+	struct dma_chan *chan;
+	const struct dma_dev *dev;
+	int i, ret;
+
+	if (alchemy_get_cputype() == ALCHEMY_CPU_AU1100) {
+		if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
+			return -EINVAL;
+	} else {
+		if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
+			return -EINVAL;
+	}
+
+	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+		if (au1000_dma_table[i].dev_id < 0)
+			break;
+
+	if (i == NUM_AU1000_DMA_CHANNELS)
+		return -ENODEV;
+
+	chan = &au1000_dma_table[i];
+
+	if (dev_id >= DMA_NUM_DEV) {
+		dev_id -= DMA_NUM_DEV;
+		dev = &dma_dev_table_bank2[dev_id];
+	} else
+		dev = &dma_dev_table[dev_id];
+
+	if (irqhandler) {
+		chan->irq_dev = irq_dev_id;
+		ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
+				  chan->irq_dev);
+		if (ret) {
+			chan->irq_dev = NULL;
+			return ret;
+		}
+	} else {
+		chan->irq_dev = NULL;
+	}
+
+	/* fill it in */
+	chan->io = (void __iomem *)(KSEG1ADDR(AU1000_DMA_PHYS_ADDR) +
+			i * DMA_CHANNEL_LEN);
+	chan->dev_id = dev_id;
+	chan->dev_str = dev_str;
+	chan->fifo_addr = dev->fifo_addr;
+	chan->mode = dev->dma_mode;
+
+	/* initialize the channel before returning */
+	init_dma(i);
+
+	return i;
+}
+EXPORT_SYMBOL(request_au1000_dma);
+
+void free_au1000_dma(unsigned int dmanr)
+{
+	struct dma_chan *chan = get_dma_chan(dmanr);
+
+	if (!chan) {
+		printk(KERN_ERR "Error trying to free DMA%d\n", dmanr);
+		return;
+	}
+
+	disable_dma(dmanr);
+	if (chan->irq_dev)
+		free_irq(chan->irq, chan->irq_dev);
+
+	chan->irq_dev = NULL;
+	chan->dev_id = -1;
+}
+EXPORT_SYMBOL(free_au1000_dma);
+
+static int __init au1000_dma_init(void)
+{
+	int base, i;
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		base = AU1000_DMA_INT_BASE;
+		break;
+	case ALCHEMY_CPU_AU1500:
+		base = AU1500_DMA_INT_BASE;
+		break;
+	case ALCHEMY_CPU_AU1100:
+		base = AU1100_DMA_INT_BASE;
+		break;
+	default:
+		goto out;
+	}
+
+	for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+		au1000_dma_table[i].irq = base + i;
+
+	printk(KERN_INFO "Alchemy DMA initialized\n");
+
+out:
+	return 0;
+}
+arch_initcall(au1000_dma_init);
diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c
new file mode 100644
index 000000000..c926cc137
--- /dev/null
+++ b/arch/mips/alchemy/common/gpiolib.c
@@ -0,0 +1,221 @@
+/*
+ *  Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *	GPIOLIB support for Alchemy chips.
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Notes :
+ *	au1000 SoC have only one GPIO block : GPIO1
+ *	Au1100, Au15x0, Au12x0 have a second one : GPIO2
+ *	Au1300 is totally different: 1 block with up to 128 GPIOs
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/property.h>
+#include <linux/types.h>
+#include <linux/gpio/driver.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
+
+static int gpio2_get(struct gpio_chip *chip, unsigned offset)
+{
+	return !!alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
+}
+
+static int gpio2_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	alchemy_gpio2_set_value(offset + ALCHEMY_GPIO2_BASE, value);
+
+	return 0;
+}
+
+static int gpio2_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return alchemy_gpio2_direction_input(offset + ALCHEMY_GPIO2_BASE);
+}
+
+static int gpio2_direction_output(struct gpio_chip *chip, unsigned offset,
+				  int value)
+{
+	return alchemy_gpio2_direction_output(offset + ALCHEMY_GPIO2_BASE,
+						value);
+}
+
+static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return alchemy_gpio2_to_irq(offset + ALCHEMY_GPIO2_BASE);
+}
+
+
+static int gpio1_get(struct gpio_chip *chip, unsigned offset)
+{
+	return !!alchemy_gpio1_get_value(offset + ALCHEMY_GPIO1_BASE);
+}
+
+static int gpio1_set(struct gpio_chip *chip,
+				unsigned offset, int value)
+{
+	alchemy_gpio1_set_value(offset + ALCHEMY_GPIO1_BASE, value);
+
+	return 0;
+}
+
+static int gpio1_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	return alchemy_gpio1_direction_input(offset + ALCHEMY_GPIO1_BASE);
+}
+
+static int gpio1_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	return alchemy_gpio1_direction_output(offset + ALCHEMY_GPIO1_BASE,
+					     value);
+}
+
+static int gpio1_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return alchemy_gpio1_to_irq(offset + ALCHEMY_GPIO1_BASE);
+}
+
+const struct software_node alchemy_gpio1_node = {
+	.name = "alchemy-gpio1",
+};
+
+const struct software_node alchemy_gpio2_node = {
+	.name = "alchemy-gpio2",
+};
+
+const struct software_node alchemy_gpic_node = {
+	.name = "alchemy-gpic",
+};
+
+static const struct software_node *alchemy_gpio_node_group[] = {
+	&alchemy_gpio1_node,
+	&alchemy_gpio2_node,
+	&alchemy_gpic_node,
+	NULL
+};
+
+static struct gpio_chip alchemy_gpio_chip[] = {
+	[0] = {
+		.label			= "alchemy-gpio1",
+		.direction_input	= gpio1_direction_input,
+		.direction_output	= gpio1_direction_output,
+		.get			= gpio1_get,
+		.set			= gpio1_set,
+		.to_irq			= gpio1_to_irq,
+		.base			= ALCHEMY_GPIO1_BASE,
+		.ngpio			= ALCHEMY_GPIO1_NUM,
+	},
+	[1] = {
+		.label			= "alchemy-gpio2",
+		.direction_input	= gpio2_direction_input,
+		.direction_output	= gpio2_direction_output,
+		.get			= gpio2_get,
+		.set			= gpio2_set,
+		.to_irq			= gpio2_to_irq,
+		.base			= ALCHEMY_GPIO2_BASE,
+		.ngpio			= ALCHEMY_GPIO2_NUM,
+	},
+};
+
+static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off)
+{
+	return !!au1300_gpio_get_value(off + AU1300_GPIO_BASE);
+}
+
+static int alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
+{
+	au1300_gpio_set_value(off + AU1300_GPIO_BASE, v);
+
+	return 0;
+}
+
+static int alchemy_gpic_dir_input(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_direction_input(off + AU1300_GPIO_BASE);
+}
+
+static int alchemy_gpic_dir_output(struct gpio_chip *chip, unsigned int off,
+				   int v)
+{
+	return au1300_gpio_direction_output(off + AU1300_GPIO_BASE, v);
+}
+
+static int alchemy_gpic_gpio_to_irq(struct gpio_chip *chip, unsigned int off)
+{
+	return au1300_gpio_to_irq(off + AU1300_GPIO_BASE);
+}
+
+static struct gpio_chip au1300_gpiochip = {
+	.label			= "alchemy-gpic",
+	.direction_input	= alchemy_gpic_dir_input,
+	.direction_output	= alchemy_gpic_dir_output,
+	.get			= alchemy_gpic_get,
+	.set			= alchemy_gpic_set,
+	.to_irq			= alchemy_gpic_gpio_to_irq,
+	.base			= AU1300_GPIO_BASE,
+	.ngpio			= AU1300_GPIO_NUM,
+};
+
+/*
+ * Software nodes must be registered before board-specific code (that runs
+ * at arch_initcall level) attempts to use them as GPIO targets or as fwnodes
+ * for registered devices. We can not do registration in alchemy_gpiochip_init
+ * because it also runs as arch_initcall and runs after board-specific code
+ * because of the link order, and so we do it at postcore_initcall level.
+ */
+static int __init alchemy_gpio_nodes_init(void)
+{
+	int ret;
+
+	ret = software_node_register_node_group(alchemy_gpio_node_group);
+	if (ret)
+		return ret;
+
+	alchemy_gpio_chip[0].fwnode = software_node_fwnode(&alchemy_gpio1_node);
+	alchemy_gpio_chip[1].fwnode = software_node_fwnode(&alchemy_gpio2_node);
+	au1300_gpiochip.fwnode = software_node_fwnode(&alchemy_gpic_node);
+
+	return 0;
+}
+postcore_initcall(alchemy_gpio_nodes_init);
+
+static int __init alchemy_gpiochip_init(void)
+{
+	int ret = 0;
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		ret = gpiochip_add_data(&alchemy_gpio_chip[0], NULL);
+		break;
+	case ALCHEMY_CPU_AU1500...ALCHEMY_CPU_AU1200:
+		ret = gpiochip_add_data(&alchemy_gpio_chip[0], NULL);
+		ret |= gpiochip_add_data(&alchemy_gpio_chip[1], NULL);
+		break;
+	case ALCHEMY_CPU_AU1300:
+		ret = gpiochip_add_data(&au1300_gpiochip, NULL);
+		break;
+	}
+	return ret;
+}
+arch_initcall(alchemy_gpiochip_init);
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
new file mode 100644
index 000000000..2403afcd2
--- /dev/null
+++ b/arch/mips/alchemy/common/irq.c
@@ -0,0 +1,1004 @@
+/*
+ * Copyright 2001, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/syscore_ops.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
+
+/* Interrupt Controller register offsets */
+#define IC_CFG0RD	0x40
+#define IC_CFG0SET	0x40
+#define IC_CFG0CLR	0x44
+#define IC_CFG1RD	0x48
+#define IC_CFG1SET	0x48
+#define IC_CFG1CLR	0x4C
+#define IC_CFG2RD	0x50
+#define IC_CFG2SET	0x50
+#define IC_CFG2CLR	0x54
+#define IC_REQ0INT	0x54
+#define IC_SRCRD	0x58
+#define IC_SRCSET	0x58
+#define IC_SRCCLR	0x5C
+#define IC_REQ1INT	0x5C
+#define IC_ASSIGNRD	0x60
+#define IC_ASSIGNSET	0x60
+#define IC_ASSIGNCLR	0x64
+#define IC_WAKERD	0x68
+#define IC_WAKESET	0x68
+#define IC_WAKECLR	0x6C
+#define IC_MASKRD	0x70
+#define IC_MASKSET	0x70
+#define IC_MASKCLR	0x74
+#define IC_RISINGRD	0x78
+#define IC_RISINGCLR	0x78
+#define IC_FALLINGRD	0x7C
+#define IC_FALLINGCLR	0x7C
+#define IC_TESTBIT	0x80
+
+/* per-processor fixed function irqs */
+struct alchemy_irqmap {
+	int irq;	/* linux IRQ number */
+	int type;	/* IRQ_TYPE_ */
+	int prio;	/* irq priority, 0 highest, 3 lowest */
+	int internal;	/* GPIC: internal source (no ext. pin)? */
+};
+
+static int au1x_ic_settype(struct irq_data *d, unsigned int type);
+static int au1300_gpic_settype(struct irq_data *d, unsigned int type);
+
+
+/* NOTE on interrupt priorities: The original writers of this code said:
+ *
+ * Because of the tight timing of SETUP token to reply transactions,
+ * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
+ * needs the highest priority.
+ */
+struct alchemy_irqmap au1000_irqmap[] __initdata = {
+	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
+	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ -1, },
+};
+
+struct alchemy_irqmap au1500_irqmap[] __initdata = {
+	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
+	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ -1, },
+};
+
+struct alchemy_irqmap au1100_irqmap[] __initdata = {
+	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
+	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ -1, },
+};
+
+struct alchemy_irqmap au1550_irqmap[] __initdata = {
+	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
+	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
+	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ -1, },
+};
+
+struct alchemy_irqmap au1200_irqmap[] __initdata = {
+	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
+	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
+	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
+	{ -1, },
+};
+
+static struct alchemy_irqmap au1300_irqmap[] __initdata = {
+	/* multifunction: gpio pin or device */
+	{ AU1300_UART1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_UART2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_UART3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_SD1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_SD2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_PSC3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	{ AU1300_NAND_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
+	/* au1300 internal */
+	{ AU1300_DDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MMU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_GPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_UDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_TOY_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	0, 1, },
+	{ AU1300_UART0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_SD0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_USB_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_LCD_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_BSA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_MPE_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
+	{ AU1300_ITE_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_AES_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ AU1300_CIM_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
+	{ -1, },	/* terminator */
+};
+
+/******************************************************************************/
+
+static void au1x_ic0_unmask(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKSET);
+	__raw_writel(1 << bit, base + IC_WAKESET);
+	wmb();
+}
+
+static void au1x_ic1_unmask(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKSET);
+	__raw_writel(1 << bit, base + IC_WAKESET);
+	wmb();
+}
+
+static void au1x_ic0_mask(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	wmb();
+}
+
+static void au1x_ic1_mask(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	wmb();
+}
+
+static void au1x_ic0_ack(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+	/*
+	 * This may assume that we don't get interrupts from
+	 * both edges at once, or if we do, that we don't care.
+	 */
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	wmb();
+}
+
+static void au1x_ic1_ack(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+	/*
+	 * This may assume that we don't get interrupts from
+	 * both edges at once, or if we do, that we don't care.
+	 */
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	wmb();
+}
+
+static void au1x_ic0_maskack(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	wmb();
+}
+
+static void au1x_ic1_maskack(struct irq_data *d)
+{
+	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+
+	__raw_writel(1 << bit, base + IC_WAKECLR);
+	__raw_writel(1 << bit, base + IC_MASKCLR);
+	__raw_writel(1 << bit, base + IC_RISINGCLR);
+	__raw_writel(1 << bit, base + IC_FALLINGCLR);
+	wmb();
+}
+
+static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
+{
+	int bit = d->irq - AU1000_INTC1_INT_BASE;
+	unsigned long wakemsk, flags;
+
+	/* only GPIO 0-7 can act as wakeup source.  Fortunately these
+	 * are wired up identically on all supported variants.
+	 */
+	if ((bit < 0) || (bit > 7))
+		return -EINVAL;
+
+	local_irq_save(flags);
+	wakemsk = alchemy_rdsys(AU1000_SYS_WAKEMSK);
+	if (on)
+		wakemsk |= 1 << bit;
+	else
+		wakemsk &= ~(1 << bit);
+	alchemy_wrsys(wakemsk, AU1000_SYS_WAKEMSK);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+/*
+ * irq_chips for both ICs; this way the mask handlers can be
+ * as short as possible.
+ */
+static struct irq_chip au1x_ic0_chip = {
+	.name		= "Alchemy-IC0",
+	.irq_ack	= au1x_ic0_ack,
+	.irq_mask	= au1x_ic0_mask,
+	.irq_mask_ack	= au1x_ic0_maskack,
+	.irq_unmask	= au1x_ic0_unmask,
+	.irq_set_type	= au1x_ic_settype,
+};
+
+static struct irq_chip au1x_ic1_chip = {
+	.name		= "Alchemy-IC1",
+	.irq_ack	= au1x_ic1_ack,
+	.irq_mask	= au1x_ic1_mask,
+	.irq_mask_ack	= au1x_ic1_maskack,
+	.irq_unmask	= au1x_ic1_unmask,
+	.irq_set_type	= au1x_ic_settype,
+	.irq_set_wake	= au1x_ic1_setwake,
+};
+
+static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
+{
+	struct irq_chip *chip;
+	unsigned int bit, irq = d->irq;
+	irq_flow_handler_t handler = NULL;
+	unsigned char *name = NULL;
+	void __iomem *base;
+	int ret;
+
+	if (irq >= AU1000_INTC1_INT_BASE) {
+		bit = irq - AU1000_INTC1_INT_BASE;
+		chip = &au1x_ic1_chip;
+		base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+	} else {
+		bit = irq - AU1000_INTC0_INT_BASE;
+		chip = &au1x_ic0_chip;
+		base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+	}
+
+	if (bit > 31)
+		return -EINVAL;
+
+	ret = 0;
+
+	switch (flow_type) {	/* cfgregs 2:1:0 */
+	case IRQ_TYPE_EDGE_RISING:	/* 0:0:1 */
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1CLR);
+		__raw_writel(1 << bit, base + IC_CFG0SET);
+		handler = handle_edge_irq;
+		name = "riseedge";
+		break;
+	case IRQ_TYPE_EDGE_FALLING:	/* 0:1:0 */
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1SET);
+		__raw_writel(1 << bit, base + IC_CFG0CLR);
+		handler = handle_edge_irq;
+		name = "falledge";
+		break;
+	case IRQ_TYPE_EDGE_BOTH:	/* 0:1:1 */
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1SET);
+		__raw_writel(1 << bit, base + IC_CFG0SET);
+		handler = handle_edge_irq;
+		name = "bothedge";
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:	/* 1:0:1 */
+		__raw_writel(1 << bit, base + IC_CFG2SET);
+		__raw_writel(1 << bit, base + IC_CFG1CLR);
+		__raw_writel(1 << bit, base + IC_CFG0SET);
+		handler = handle_level_irq;
+		name = "hilevel";
+		break;
+	case IRQ_TYPE_LEVEL_LOW:	/* 1:1:0 */
+		__raw_writel(1 << bit, base + IC_CFG2SET);
+		__raw_writel(1 << bit, base + IC_CFG1SET);
+		__raw_writel(1 << bit, base + IC_CFG0CLR);
+		handler = handle_level_irq;
+		name = "lowlevel";
+		break;
+	case IRQ_TYPE_NONE:		/* 0:0:0 */
+		__raw_writel(1 << bit, base + IC_CFG2CLR);
+		__raw_writel(1 << bit, base + IC_CFG1CLR);
+		__raw_writel(1 << bit, base + IC_CFG0CLR);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	irq_set_chip_handler_name_locked(d, chip, handler, name);
+
+	wmb();
+
+	return ret;
+}
+
+/******************************************************************************/
+
+/*
+ * au1300_gpic_chgcfg - change PIN configuration.
+ * @gpio:	pin to change (0-based GPIO number from datasheet).
+ * @clr:	clear all bits set in 'clr'.
+ * @set:	set these bits.
+ *
+ * modifies a pins' configuration register, bits set in @clr will
+ * be cleared in the register, bits in @set will be set.
+ */
+static inline void au1300_gpic_chgcfg(unsigned int gpio,
+				      unsigned long clr,
+				      unsigned long set)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long l;
+
+	r += gpio * 4;	/* offset into pin config array */
+	l = __raw_readl(r + AU1300_GPIC_PINCFG);
+	l &= ~clr;
+	l |= set;
+	__raw_writel(l, r + AU1300_GPIC_PINCFG);
+	wmb();
+}
+
+/*
+ * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl).
+ * @pin:	pin (0-based GPIO number from datasheet).
+ *
+ * Assigns a GPIO pin to the GPIO controller, so its level can either
+ * be read or set through the generic GPIO functions.
+ * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1).
+ * REVISIT: is this function really necessary?
+ */
+void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio)
+{
+	au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE);
+}
+EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio);
+
+/*
+ * au1300_pinfunc_to_dev - assign a pin to the device function.
+ * @pin:	pin (0-based GPIO number from datasheet).
+ *
+ * Assigns a GPIO pin to its associated device function; the pin will be
+ * driven by the device and not through GPIO functions.
+ */
+void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit;
+
+	r += GPIC_GPIO_BANKOFF(gpio);
+	bit = GPIC_GPIO_TO_BIT(gpio);
+	__raw_writel(bit, r + AU1300_GPIC_DEVSEL);
+	wmb();
+}
+EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev);
+
+/*
+ * au1300_set_irq_priority -  set internal priority of IRQ.
+ * @irq:	irq to set priority (linux irq number).
+ * @p:		priority (0 = highest, 3 = lowest).
+ */
+void au1300_set_irq_priority(unsigned int irq, int p)
+{
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p));
+}
+EXPORT_SYMBOL_GPL(au1300_set_irq_priority);
+
+/*
+ * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers.
+ * @dchan:	dbdma trigger select (0, 1).
+ * @gpio:	pin to assign as trigger.
+ *
+ * DBDMA controller has 2 external trigger sources; this function
+ * assigns a GPIO to the selected trigger.
+ */
+void au1300_set_dbdma_gpio(int dchan, unsigned int gpio)
+{
+	unsigned long r;
+
+	if ((dchan >= 0) && (dchan <= 1)) {
+		r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
+		r &= ~(0xff << (8 * dchan));
+		r |= (gpio & 0x7f) << (8 * dchan);
+		__raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
+		wmb();
+	}
+}
+
+static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow)
+{
+	au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE,
+			   allow ? GPIC_CFG_IDLEWAKE : 0);
+}
+
+static void au1300_gpic_mask(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IDIS);
+	wmb();
+
+	gpic_pin_set_idlewake(irq, 0);
+}
+
+static void au1300_gpic_unmask(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+
+	gpic_pin_set_idlewake(irq, 1);
+
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IEN);
+	wmb();
+}
+
+static void au1300_gpic_maskack(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
+	__raw_writel(bit, r + AU1300_GPIC_IDIS);	/* mask */
+	wmb();
+
+	gpic_pin_set_idlewake(irq, 0);
+}
+
+static void au1300_gpic_ack(struct irq_data *d)
+{
+	void __iomem *r = AU1300_GPIC_ADDR;
+	unsigned long bit, irq = d->irq;
+
+	irq -= ALCHEMY_GPIC_INT_BASE;
+	r += GPIC_GPIO_BANKOFF(irq);
+	bit = GPIC_GPIO_TO_BIT(irq);
+	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
+	wmb();
+}
+
+static struct irq_chip au1300_gpic = {
+	.name		= "GPIOINT",
+	.irq_ack	= au1300_gpic_ack,
+	.irq_mask	= au1300_gpic_mask,
+	.irq_mask_ack	= au1300_gpic_maskack,
+	.irq_unmask	= au1300_gpic_unmask,
+	.irq_set_type	= au1300_gpic_settype,
+};
+
+static int au1300_gpic_settype(struct irq_data *d, unsigned int type)
+{
+	unsigned long s;
+	unsigned char *name = NULL;
+	irq_flow_handler_t hdl = NULL;
+
+	switch (type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		s = GPIC_CFG_IC_LEVEL_HIGH;
+		name = "high";
+		hdl = handle_level_irq;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		s = GPIC_CFG_IC_LEVEL_LOW;
+		name = "low";
+		hdl = handle_level_irq;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		s = GPIC_CFG_IC_EDGE_RISE;
+		name = "posedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		s = GPIC_CFG_IC_EDGE_FALL;
+		name = "negedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		s = GPIC_CFG_IC_EDGE_BOTH;
+		name = "bothedge";
+		hdl = handle_edge_irq;
+		break;
+	case IRQ_TYPE_NONE:
+		s = GPIC_CFG_IC_OFF;
+		name = "disabled";
+		hdl = handle_level_irq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	irq_set_chip_handler_name_locked(d, &au1300_gpic, hdl, name);
+
+	au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s);
+
+	return 0;
+}
+
+/******************************************************************************/
+
+static inline void ic_init(void __iomem *base)
+{
+	/* initialize interrupt controller to a safe state */
+	__raw_writel(0xffffffff, base + IC_CFG0CLR);
+	__raw_writel(0xffffffff, base + IC_CFG1CLR);
+	__raw_writel(0xffffffff, base + IC_CFG2CLR);
+	__raw_writel(0xffffffff, base + IC_MASKCLR);
+	__raw_writel(0xffffffff, base + IC_ASSIGNCLR);
+	__raw_writel(0xffffffff, base + IC_WAKECLR);
+	__raw_writel(0xffffffff, base + IC_SRCSET);
+	__raw_writel(0xffffffff, base + IC_FALLINGCLR);
+	__raw_writel(0xffffffff, base + IC_RISINGCLR);
+	__raw_writel(0x00000000, base + IC_TESTBIT);
+	wmb();
+}
+
+static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6];
+
+static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
+{
+	d[0] = __raw_readl(base + IC_CFG0RD);
+	d[1] = __raw_readl(base + IC_CFG1RD);
+	d[2] = __raw_readl(base + IC_CFG2RD);
+	d[3] = __raw_readl(base + IC_SRCRD);
+	d[4] = __raw_readl(base + IC_ASSIGNRD);
+	d[5] = __raw_readl(base + IC_WAKERD);
+	d[6] = __raw_readl(base + IC_MASKRD);
+	ic_init(base);		/* shut it up too while at it */
+}
+
+static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
+{
+	ic_init(base);
+
+	__raw_writel(d[0], base + IC_CFG0SET);
+	__raw_writel(d[1], base + IC_CFG1SET);
+	__raw_writel(d[2], base + IC_CFG2SET);
+	__raw_writel(d[3], base + IC_SRCSET);
+	__raw_writel(d[4], base + IC_ASSIGNSET);
+	__raw_writel(d[5], base + IC_WAKESET);
+	wmb();
+
+	__raw_writel(d[6], base + IC_MASKSET);
+	wmb();
+}
+
+static int alchemy_ic_suspend(void *data)
+{
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			       alchemy_gpic_pmdata);
+	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			       &alchemy_gpic_pmdata[7]);
+	return 0;
+}
+
+static void alchemy_ic_resume(void *data)
+{
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
+			      &alchemy_gpic_pmdata[7]);
+	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
+			      alchemy_gpic_pmdata);
+}
+
+static int alchemy_gpic_suspend(void *data)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	int i;
+
+	/* save 4 interrupt mask status registers */
+	alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0);
+	alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4);
+	alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8);
+	alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc);
+
+	/* save misc register(s) */
+	alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL);
+
+	/* molto silenzioso */
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
+	wmb();
+
+	/* save pin/int-type configuration */
+	base += AU1300_GPIC_PINCFG;
+	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
+		alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2));
+
+	wmb();
+
+	return 0;
+}
+
+static void alchemy_gpic_resume(void *data)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	int i;
+
+	/* disable all first */
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
+	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
+	wmb();
+
+	/* restore pin/int-type configurations */
+	base += AU1300_GPIC_PINCFG;
+	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
+		__raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2));
+	wmb();
+
+	/* restore misc register(s) */
+	base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
+	__raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL);
+	wmb();
+
+	/* finally restore masks */
+	__raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0);
+	__raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4);
+	__raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8);
+	__raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc);
+	wmb();
+}
+
+static const struct syscore_ops alchemy_ic_pmops = {
+	.suspend	= alchemy_ic_suspend,
+	.resume		= alchemy_ic_resume,
+};
+
+static struct syscore alchemy_ic_pm = {
+	.ops = &alchemy_ic_pmops,
+};
+
+static const struct syscore_ops alchemy_gpic_pmops = {
+	.suspend	= alchemy_gpic_suspend,
+	.resume		= alchemy_gpic_resume,
+};
+
+static struct syscore alchemy_gpic_pm = {
+	.ops = &alchemy_gpic_pmops,
+};
+
+/******************************************************************************/
+
+/* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */
+#define DISP(name, base, addr)						      \
+static void au1000_##name##_dispatch(struct irq_desc *d)		      \
+{									      \
+	unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr));	      \
+	if (likely(r))							      \
+		generic_handle_irq(base + __ffs(r));			      \
+	else								      \
+		spurious_interrupt();					      \
+}
+
+DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT)
+DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT)
+DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT)
+DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT)
+
+static void alchemy_gpic_dispatch(struct irq_desc *d)
+{
+	int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC);
+	generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i);
+}
+
+/******************************************************************************/
+
+static void __init au1000_init_irq(struct alchemy_irqmap *map)
+{
+	unsigned int bit, irq_nr;
+	void __iomem *base;
+
+	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
+	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
+	register_syscore(&alchemy_ic_pm);
+	mips_cpu_irq_init();
+
+	/* register all 64 possible IC0+IC1 irq sources as type "none".
+	 * Use set_irq_type() to set edge/level behaviour at runtime.
+	 */
+	for (irq_nr = AU1000_INTC0_INT_BASE;
+	     (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++)
+		au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
+
+	for (irq_nr = AU1000_INTC1_INT_BASE;
+	     (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++)
+		au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
+
+	/*
+	 * Initialize IC0, which is fixed per processor.
+	 */
+	while (map->irq != -1) {
+		irq_nr = map->irq;
+
+		if (irq_nr >= AU1000_INTC1_INT_BASE) {
+			bit = irq_nr - AU1000_INTC1_INT_BASE;
+			base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
+		} else {
+			bit = irq_nr - AU1000_INTC0_INT_BASE;
+			base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
+		}
+		if (map->prio == 0)
+			__raw_writel(1 << bit, base + IC_ASSIGNSET);
+
+		au1x_ic_settype(irq_get_irq_data(irq_nr), map->type);
+		++map;
+	}
+
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch);
+}
+
+static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints)
+{
+	int i;
+	void __iomem *bank_base;
+
+	register_syscore(&alchemy_gpic_pm);
+	mips_cpu_irq_init();
+
+	/* disable & ack all possible interrupt sources */
+	for (i = 0; i < 4; i++) {
+		bank_base = AU1300_GPIC_ADDR + (i * 4);
+		__raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS);
+		wmb();
+		__raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND);
+		wmb();
+	}
+
+	/* register an irq_chip for them, with 2nd highest priority */
+	for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) {
+		au1300_set_irq_priority(i, 1);
+		au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
+	}
+
+	/* setup known on-chip sources */
+	while ((i = dints->irq) != -1) {
+		au1300_gpic_settype(irq_get_irq_data(i), dints->type);
+		au1300_set_irq_priority(i, dints->prio);
+
+		if (dints->internal)
+			au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE);
+
+		dints++;
+	}
+
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch);
+	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch);
+}
+
+/******************************************************************************/
+
+void __init arch_init_irq(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		au1000_init_irq(au1000_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1500:
+		au1000_init_irq(au1500_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1100:
+		au1000_init_irq(au1100_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_init_irq(au1550_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1000_init_irq(au1200_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1300:
+		alchemy_gpic_init_irq(au1300_irqmap);
+		break;
+	default:
+		pr_err("unknown Alchemy IRQ core\n");
+		break;
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned long r = (read_c0_status() & read_c0_cause()) >> 8;
+	do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff));
+}
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
new file mode 100644
index 000000000..02bf02164
--- /dev/null
+++ b/arch/mips/alchemy/common/platform.c
@@ -0,0 +1,464 @@
+/*
+ * Platform device support for Au1x00 SoCs.
+ *
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * (C) Copyright Embedded Alley Solutions, Inc 2005
+ * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
+
+#include <prom.h>
+
+static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
+			    unsigned int old_state)
+{
+#ifdef CONFIG_SERIAL_8250
+	switch (state) {
+	case 0:
+		alchemy_uart_enable(CPHYSADDR(port->membase));
+		serial8250_do_pm(port, state, old_state);
+		break;
+	case 3:		/* power off */
+		serial8250_do_pm(port, state, old_state);
+		alchemy_uart_disable(CPHYSADDR(port->membase));
+		break;
+	default:
+		serial8250_do_pm(port, state, old_state);
+		break;
+	}
+#endif
+}
+
+#define PORT(_base, _irq)					\
+	{							\
+		.mapbase	= _base,			\
+		.mapsize	= 0x1000,			\
+		.irq		= _irq,				\
+		.regshift	= 2,				\
+		.flags		= UPF_SKIP_TEST | UPF_IOREMAP | \
+				  UPF_FIXED_TYPE,		\
+		.type		= PORT_16550A,			\
+		.pm		= alchemy_8250_pm,		\
+	}
+
+static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
+		PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1100] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1200] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
+	},
+	[ALCHEMY_CPU_AU1300] = {
+		PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT),
+		PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT),
+		PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT),
+		PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT),
+	},
+};
+
+static struct platform_device au1xx0_uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_AU1X00,
+};
+
+static void __init alchemy_setup_uarts(int ctype)
+{
+	long uartclk;
+	int s = sizeof(struct plat_serial8250_port);
+	int c = alchemy_get_uarts(ctype);
+	struct plat_serial8250_port *ports;
+	struct clk *clk = clk_get(NULL, ALCHEMY_PERIPH_CLK);
+
+	if (IS_ERR(clk))
+		return;
+	if (clk_prepare_enable(clk)) {
+		clk_put(clk);
+		return;
+	}
+	uartclk = clk_get_rate(clk);
+	clk_put(clk);
+
+	ports = kcalloc(s, (c + 1), GFP_KERNEL);
+	if (!ports) {
+		printk(KERN_INFO "Alchemy: no memory for UART data\n");
+		return;
+	}
+	memcpy(ports, au1x00_uart_data[ctype], s * c);
+	au1xx0_uart_device.dev.platform_data = ports;
+
+	/* Fill up uartclk. */
+	for (s = 0; s < c; s++) {
+		ports[s].uartclk = uartclk;
+		if (au_platform_setup(&ports[s]) < 0) {
+			kfree(ports);
+			printk(KERN_INFO "Alchemy: missing support for UARTs\n");
+			return;
+		}
+	}
+	if (platform_device_register(&au1xx0_uart_device))
+		printk(KERN_INFO "Alchemy: failed to register UARTs\n");
+}
+
+
+static u64 alchemy_all_dmamask = DMA_BIT_MASK(32);
+
+/* Power on callback for the ehci platform driver */
+static int alchemy_ehci_power_on(struct platform_device *pdev)
+{
+	return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
+}
+
+/* Power off/suspend callback for the ehci platform driver */
+static void alchemy_ehci_power_off(struct platform_device *pdev)
+{
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
+}
+
+static struct usb_ehci_pdata alchemy_ehci_pdata = {
+	.no_io_watchdog = 1,
+	.power_on	= alchemy_ehci_power_on,
+	.power_off	= alchemy_ehci_power_off,
+	.power_suspend	= alchemy_ehci_power_off,
+};
+
+/* Power on callback for the ohci platform driver */
+static int alchemy_ohci_power_on(struct platform_device *pdev)
+{
+	int unit;
+
+	unit = (pdev->id == 1) ?
+		ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+	return alchemy_usb_control(unit, 1);
+}
+
+/* Power off/suspend callback for the ohci platform driver */
+static void alchemy_ohci_power_off(struct platform_device *pdev)
+{
+	int unit;
+
+	unit = (pdev->id == 1) ?
+		ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+	alchemy_usb_control(unit, 0);
+}
+
+static struct usb_ohci_pdata alchemy_ohci_pdata = {
+	.power_on		= alchemy_ohci_power_on,
+	.power_off		= alchemy_ohci_power_off,
+	.power_suspend		= alchemy_ohci_power_off,
+};
+
+static unsigned long alchemy_ohci_data[][2] __initdata = {
+	[ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT },
+};
+
+static unsigned long alchemy_ehci_data[][2] __initdata = {
+	[ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT },
+};
+
+static int __init _new_usbres(struct resource **r, struct platform_device **d)
+{
+	*r = kzalloc_objs(struct resource, 2);
+	if (!*r)
+		return -ENOMEM;
+	*d = kzalloc_obj(struct platform_device);
+	if (!*d) {
+		kfree(*r);
+		return -ENOMEM;
+	}
+
+	(*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	(*d)->num_resources = 2;
+	(*d)->resource = *r;
+
+	return 0;
+}
+
+static void __init alchemy_setup_usb(int ctype)
+{
+	struct resource *res;
+	struct platform_device *pdev;
+
+	/* setup OHCI0.  Every variant has one */
+	if (_new_usbres(&res, &pdev))
+		return;
+
+	res[0].start = alchemy_ohci_data[ctype][0];
+	res[0].end = res[0].start + 0x100 - 1;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = alchemy_ohci_data[ctype][1];
+	res[1].end = res[1].start;
+	res[1].flags = IORESOURCE_IRQ;
+	pdev->name = "ohci-platform";
+	pdev->id = 0;
+	pdev->dev.dma_mask = &alchemy_all_dmamask;
+	pdev->dev.platform_data = &alchemy_ohci_pdata;
+
+	if (platform_device_register(pdev))
+		printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
+
+
+	/* setup EHCI0: Au1200/Au1300 */
+	if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) {
+		if (_new_usbres(&res, &pdev))
+			return;
+
+		res[0].start = alchemy_ehci_data[ctype][0];
+		res[0].end = res[0].start + 0x100 - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = alchemy_ehci_data[ctype][1];
+		res[1].end = res[1].start;
+		res[1].flags = IORESOURCE_IRQ;
+		pdev->name = "ehci-platform";
+		pdev->id = 0;
+		pdev->dev.dma_mask = &alchemy_all_dmamask;
+		pdev->dev.platform_data = &alchemy_ehci_pdata;
+
+		if (platform_device_register(pdev))
+			printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
+	}
+
+	/* Au1300: OHCI1 */
+	if (ctype == ALCHEMY_CPU_AU1300) {
+		if (_new_usbres(&res, &pdev))
+			return;
+
+		res[0].start = AU1300_USB_OHCI1_PHYS_ADDR;
+		res[0].end = res[0].start + 0x100 - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = AU1300_USB_INT;
+		res[1].end = res[1].start;
+		res[1].flags = IORESOURCE_IRQ;
+		pdev->name = "ohci-platform";
+		pdev->id = 1;
+		pdev->dev.dma_mask = &alchemy_all_dmamask;
+		pdev->dev.platform_data = &alchemy_ohci_pdata;
+
+		if (platform_device_register(pdev))
+			printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
+	}
+}
+
+/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES_COUNT	4	/* MAC regs, MAC en, MAC INT, MACDMA regs */
+#define MAC_RES(_base, _enable, _irq, _macdma)		\
+	{						\
+		.start	= _base,			\
+		.end	= _base + 0xffff,		\
+		.flags	= IORESOURCE_MEM,		\
+	},						\
+	{						\
+		.start	= _enable,			\
+		.end	= _enable + 0x3,		\
+		.flags	= IORESOURCE_MEM,		\
+	},						\
+	{						\
+		.start	= _irq,				\
+		.end	= _irq,				\
+		.flags	= IORESOURCE_IRQ		\
+	},						\
+	{						\
+		.start	= _macdma,			\
+		.end	= _macdma + 0x1ff,		\
+		.flags	= IORESOURCE_MEM,		\
+	}
+
+static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1000_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		MAC_RES(AU1500_MAC0_PHYS_ADDR,
+			AU1500_MACEN_PHYS_ADDR,
+			AU1500_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1100] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1100_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1550_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+};
+
+static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
+	.phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth0_device = {
+	.name		= "au1000-eth",
+	.id		= 0,
+	.num_resources	= MAC_RES_COUNT,
+	.dev = {
+		.dma_mask               = &alchemy_all_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data          = &au1xxx_eth0_platform_data,
+	},
+};
+
+static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		MAC_RES(AU1000_MAC1_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR + 4,
+			AU1000_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		MAC_RES(AU1500_MAC1_PHYS_ADDR,
+			AU1500_MACEN_PHYS_ADDR + 4,
+			AU1500_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		MAC_RES(AU1000_MAC1_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR + 4,
+			AU1550_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
+	},
+};
+
+static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
+	.phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth1_device = {
+	.name		= "au1000-eth",
+	.id		= 1,
+	.num_resources	= MAC_RES_COUNT,
+	.dev = {
+		.dma_mask               = &alchemy_all_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data          = &au1xxx_eth1_platform_data,
+	},
+};
+
+void __init au1xxx_override_eth_cfg(unsigned int port,
+			struct au1000_eth_platform_data *eth_data)
+{
+	if (!eth_data || port > 1)
+		return;
+
+	if (port == 0)
+		memcpy(&au1xxx_eth0_platform_data, eth_data,
+			sizeof(struct au1000_eth_platform_data));
+	else
+		memcpy(&au1xxx_eth1_platform_data, eth_data,
+			sizeof(struct au1000_eth_platform_data));
+}
+
+static void __init alchemy_setup_macs(int ctype)
+{
+	int ret, i;
+	unsigned char ethaddr[6];
+	struct resource *macres;
+
+	/* Handle 1st MAC */
+	if (alchemy_get_macs(ctype) < 1)
+		return;
+
+	macres = kmemdup_array(au1xxx_eth0_resources[ctype], MAC_RES_COUNT,
+			       sizeof(*macres), GFP_KERNEL);
+	if (!macres) {
+		printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
+		return;
+	}
+	au1xxx_eth0_device.resource = macres;
+
+	i = prom_get_ethernet_addr(ethaddr);
+	if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
+		memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+
+	ret = platform_device_register(&au1xxx_eth0_device);
+	if (ret)
+		printk(KERN_INFO "Alchemy: failed to register MAC0\n");
+
+
+	/* Handle 2nd MAC */
+	if (alchemy_get_macs(ctype) < 2)
+		return;
+
+	macres = kmemdup_array(au1xxx_eth1_resources[ctype], MAC_RES_COUNT,
+			       sizeof(*macres), GFP_KERNEL);
+	if (!macres) {
+		printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
+		return;
+	}
+	au1xxx_eth1_device.resource = macres;
+
+	ethaddr[5] += 1;	/* next addr for 2nd MAC */
+	if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
+		memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
+
+	/* Register second MAC if enabled in pinfunc */
+	if (!(alchemy_rdsys(AU1000_SYS_PINFUNC) & SYS_PF_NI2)) {
+		ret = platform_device_register(&au1xxx_eth1_device);
+		if (ret)
+			printk(KERN_INFO "Alchemy: failed to register MAC1\n");
+	}
+}
+
+static int __init au1xxx_platform_init(void)
+{
+	int ctype = alchemy_get_cputype();
+
+	alchemy_setup_uarts(ctype);
+	alchemy_setup_macs(ctype);
+	alchemy_setup_usb(ctype);
+
+	return 0;
+}
+
+arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
new file mode 100644
index 000000000..303257b69
--- /dev/null
+++ b/arch/mips/alchemy/common/power.c
@@ -0,0 +1,132 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1xx0 Power Management routines.
+ *
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  Some of the routines are right out of init/main.c, whose
+ *  copyrights apply here.
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pm.h>
+#include <linux/sysctl.h>
+#include <linux/jiffies.h>
+
+#include <linux/uaccess.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/*
+ * We need to save/restore a bunch of core registers that are
+ * either volatile or reset to some state across a processor sleep.
+ * If reading a register doesn't provide a proper result for a
+ * later restore, we have to provide a function for loading that
+ * register and save a copy.
+ *
+ * We only have to save/restore registers that aren't otherwise
+ * done as part of a driver pm_* function.
+ */
+static unsigned int sleep_sys_clocks[5];
+static unsigned int sleep_sys_pinfunc;
+static unsigned int sleep_static_memctlr[4][3];
+
+
+static void save_core_regs(void)
+{
+	/* Clocks and PLLs. */
+	sleep_sys_clocks[0] = alchemy_rdsys(AU1000_SYS_FREQCTRL0);
+	sleep_sys_clocks[1] = alchemy_rdsys(AU1000_SYS_FREQCTRL1);
+	sleep_sys_clocks[2] = alchemy_rdsys(AU1000_SYS_CLKSRC);
+	sleep_sys_clocks[3] = alchemy_rdsys(AU1000_SYS_CPUPLL);
+	sleep_sys_clocks[4] = alchemy_rdsys(AU1000_SYS_AUXPLL);
+
+	/* pin mux config */
+	sleep_sys_pinfunc = alchemy_rdsys(AU1000_SYS_PINFUNC);
+
+	/* Save the static memory controller configuration. */
+	sleep_static_memctlr[0][0] = alchemy_rdsmem(AU1000_MEM_STCFG0);
+	sleep_static_memctlr[0][1] = alchemy_rdsmem(AU1000_MEM_STTIME0);
+	sleep_static_memctlr[0][2] = alchemy_rdsmem(AU1000_MEM_STADDR0);
+	sleep_static_memctlr[1][0] = alchemy_rdsmem(AU1000_MEM_STCFG1);
+	sleep_static_memctlr[1][1] = alchemy_rdsmem(AU1000_MEM_STTIME1);
+	sleep_static_memctlr[1][2] = alchemy_rdsmem(AU1000_MEM_STADDR1);
+	sleep_static_memctlr[2][0] = alchemy_rdsmem(AU1000_MEM_STCFG2);
+	sleep_static_memctlr[2][1] = alchemy_rdsmem(AU1000_MEM_STTIME2);
+	sleep_static_memctlr[2][2] = alchemy_rdsmem(AU1000_MEM_STADDR2);
+	sleep_static_memctlr[3][0] = alchemy_rdsmem(AU1000_MEM_STCFG3);
+	sleep_static_memctlr[3][1] = alchemy_rdsmem(AU1000_MEM_STTIME3);
+	sleep_static_memctlr[3][2] = alchemy_rdsmem(AU1000_MEM_STADDR3);
+}
+
+static void restore_core_regs(void)
+{
+	/* restore clock configuration.  Writing CPUPLL last will
+	 * stall a bit and stabilize other clocks (unless this is
+	 * one of those Au1000 with a write-only PLL, where we dont
+	 * have a valid value)
+	 */
+	alchemy_wrsys(sleep_sys_clocks[0], AU1000_SYS_FREQCTRL0);
+	alchemy_wrsys(sleep_sys_clocks[1], AU1000_SYS_FREQCTRL1);
+	alchemy_wrsys(sleep_sys_clocks[2], AU1000_SYS_CLKSRC);
+	alchemy_wrsys(sleep_sys_clocks[4], AU1000_SYS_AUXPLL);
+	if (!au1xxx_cpu_has_pll_wo())
+		alchemy_wrsys(sleep_sys_clocks[3], AU1000_SYS_CPUPLL);
+
+	alchemy_wrsys(sleep_sys_pinfunc, AU1000_SYS_PINFUNC);
+
+	/* Restore the static memory controller configuration. */
+	alchemy_wrsmem(sleep_static_memctlr[0][0], AU1000_MEM_STCFG0);
+	alchemy_wrsmem(sleep_static_memctlr[0][1], AU1000_MEM_STTIME0);
+	alchemy_wrsmem(sleep_static_memctlr[0][2], AU1000_MEM_STADDR0);
+	alchemy_wrsmem(sleep_static_memctlr[1][0], AU1000_MEM_STCFG1);
+	alchemy_wrsmem(sleep_static_memctlr[1][1], AU1000_MEM_STTIME1);
+	alchemy_wrsmem(sleep_static_memctlr[1][2], AU1000_MEM_STADDR1);
+	alchemy_wrsmem(sleep_static_memctlr[2][0], AU1000_MEM_STCFG2);
+	alchemy_wrsmem(sleep_static_memctlr[2][1], AU1000_MEM_STTIME2);
+	alchemy_wrsmem(sleep_static_memctlr[2][2], AU1000_MEM_STADDR2);
+	alchemy_wrsmem(sleep_static_memctlr[3][0], AU1000_MEM_STCFG3);
+	alchemy_wrsmem(sleep_static_memctlr[3][1], AU1000_MEM_STTIME3);
+	alchemy_wrsmem(sleep_static_memctlr[3][2], AU1000_MEM_STADDR3);
+}
+
+void au_sleep(void)
+{
+	save_core_regs();
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		alchemy_sleep_au1000();
+		break;
+	case ALCHEMY_CPU_AU1550:
+	case ALCHEMY_CPU_AU1200:
+		alchemy_sleep_au1550();
+		break;
+	case ALCHEMY_CPU_AU1300:
+		alchemy_sleep_au1300();
+		break;
+	}
+
+	restore_core_regs();
+}
diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c
new file mode 100644
index 000000000..20d30f626
--- /dev/null
+++ b/arch/mips/alchemy/common/prom.c
@@ -0,0 +1,146 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *    PROM library initialisation code, supports YAMON and U-Boot.
+ *
+ * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file was derived from Carsten Langgaard's
+ * arch/mips/mips-boards/xx files.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/sizes.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <prom.h>
+
+int prom_argc;
+char **prom_argv;
+char **prom_envp;
+
+void __init prom_init_cmdline(void)
+{
+	int i;
+
+	for (i = 1; i < prom_argc; i++) {
+		strlcat(arcs_cmdline, prom_argv[i], COMMAND_LINE_SIZE);
+		if (i < (prom_argc - 1))
+			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
+	}
+}
+
+char *prom_getenv(char *envname)
+{
+	/*
+	 * Return a pointer to the given environment variable.
+	 * YAMON uses "name", "value" pairs, while U-Boot uses "name=value".
+	 */
+
+	char **env = prom_envp;
+	int i = strlen(envname);
+	int yamon = (*env && strchr(*env, '=') == NULL);
+
+	while (*env) {
+		if (yamon) {
+			if (strcmp(envname, *env++) == 0)
+				return *env;
+		} else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
+			return *env + i + 1;
+		env++;
+	}
+
+	return NULL;
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = (int)fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
+		memsize = SZ_64M; /* minimum memsize is 64MB RAM */
+
+	memblock_add(0, memsize);
+}
+
+static inline unsigned char str2hexnum(unsigned char c)
+{
+	if (c >= '0' && c <= '9')
+		return c - '0';
+	if (c >= 'a' && c <= 'f')
+		return c - 'a' + 10;
+	if (c >= 'A' && c <= 'F')
+		return c - 'A' + 10;
+
+	return 0; /* foo */
+}
+
+static inline void str2eaddr(unsigned char *ea, unsigned char *str)
+{
+	int i;
+
+	for (i = 0; i < 6; i++) {
+		unsigned char num;
+
+		if ((*str == '.') || (*str == ':'))
+			str++;
+		num  = str2hexnum(*str++) << 4;
+		num |= str2hexnum(*str++);
+		ea[i] = num;
+	}
+}
+
+int __init prom_get_ethernet_addr(char *ethernet_addr)
+{
+	char *ethaddr_str;
+
+	/* Check the environment variables first */
+	ethaddr_str = prom_getenv("ethaddr");
+	if (!ethaddr_str) {
+		/* Check command line */
+		ethaddr_str = strstr(arcs_cmdline, "ethaddr=");
+		if (!ethaddr_str)
+			return -1;
+
+		ethaddr_str += strlen("ethaddr=");
+	}
+
+	str2eaddr(ethernet_addr, ethaddr_str);
+
+	return 0;
+}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
new file mode 100644
index 000000000..992134a8c
--- /dev/null
+++ b/arch/mips/alchemy/common/setup.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2000, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com
+ *
+ * Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/dma-map-ops.h> /* for dma_default_coherent */
+
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+
+#include <au1000.h>
+
+static bool alchemy_dma_coherent(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		return false;
+	case ALCHEMY_CPU_AU1200:
+		/* Au1200 AB USB does not support coherent memory */
+		if ((read_c0_prid() & PRID_REV_MASK) == 0)
+			return false;
+		return true;
+	default:
+		return true;
+	}
+}
+
+void __init plat_mem_setup(void)
+{
+	alchemy_set_lpj();
+
+	if (au1xxx_cpu_needs_config_od())
+		/* Various early Au1xx0 errata corrected by this */
+		set_c0_config(1 << 19); /* Set Config[OD] */
+	else
+		/* Clear to obtain best system bus performance */
+		clear_c0_config(1 << 19); /* Clear Config[OD] */
+
+	dma_default_coherent = alchemy_dma_coherent();
+
+	board_setup();	/* board specific setup */
+
+	/* IO/MEM resources. */
+	set_io_port_base(0);
+	ioport_resource.start = IOPORT_RESOURCE_START;
+	ioport_resource.end = IOPORT_RESOURCE_END;
+	iomem_resource.start = IOMEM_RESOURCE_START;
+	iomem_resource.end = IOMEM_RESOURCE_END;
+}
+
+#ifdef CONFIG_MIPS_FIXUP_BIGPHYS_ADDR
+/* This routine should be valid for all Au1x based boards */
+phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
+{
+	unsigned long start = ALCHEMY_PCI_MEMWIN_START;
+	unsigned long end = ALCHEMY_PCI_MEMWIN_END;
+
+	/* Don't fixup 36-bit addresses */
+	if ((phys_addr >> 32) != 0)
+		return phys_addr;
+
+	/* Check for PCI memory window */
+	if (phys_addr >= start && (phys_addr + size - 1) <= end)
+		return (phys_addr_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr);
+
+	/* default nop */
+	return phys_addr;
+}
+
+unsigned long io_remap_pfn_range_pfn(unsigned long pfn, unsigned long size)
+{
+	phys_addr_t phys_addr = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+
+	return phys_addr >> PAGE_SHIFT;
+}
+EXPORT_SYMBOL(io_remap_pfn_range_pfn);
+
+#endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
new file mode 100644
index 000000000..13586d224
--- /dev/null
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -0,0 +1,266 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2002 Embedded Edge, LLC
+ * Author: dan@embeddededge.com
+ *
+ * Sleep helper for Au1xxx sleep mode.
+ */
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+	.extern __flush_cache_all
+
+	.text
+	.set noreorder
+	.set noat
+	.align	5
+
+
+/* preparatory stuff */
+.macro	SETUP_SLEEP
+	subu	sp, PT_SIZE
+	sw	$1, PT_R1(sp)
+	sw	$2, PT_R2(sp)
+	sw	$3, PT_R3(sp)
+	sw	$4, PT_R4(sp)
+	sw	$5, PT_R5(sp)
+	sw	$6, PT_R6(sp)
+	sw	$7, PT_R7(sp)
+	sw	$16, PT_R16(sp)
+	sw	$17, PT_R17(sp)
+	sw	$18, PT_R18(sp)
+	sw	$19, PT_R19(sp)
+	sw	$20, PT_R20(sp)
+	sw	$21, PT_R21(sp)
+	sw	$22, PT_R22(sp)
+	sw	$23, PT_R23(sp)
+	sw	$26, PT_R26(sp)
+	sw	$27, PT_R27(sp)
+	sw	$28, PT_R28(sp)
+	sw	$30, PT_R30(sp)
+	sw	$31, PT_R31(sp)
+	mfc0	k0, CP0_STATUS
+	sw	k0, 0x20(sp)
+	mfc0	k0, CP0_CONTEXT
+	sw	k0, 0x1c(sp)
+	mfc0	k0, CP0_PAGEMASK
+	sw	k0, 0x18(sp)
+	mfc0	k0, CP0_CONFIG
+	sw	k0, 0x14(sp)
+
+	/* flush caches to make sure context is in memory */
+	la	t1, __flush_cache_all
+	lw	t0, 0(t1)
+	jalr	t0
+	 nop
+
+	/* Now set up the scratch registers so the boot rom will
+	 * return to this point upon wakeup.
+	 * sys_scratch0 : SP
+	 * sys_scratch1 : RA
+	 */
+	lui	t3, 0xb190		/* sys_xxx */
+	sw	sp, 0x0018(t3)
+	la	k0, alchemy_sleep_wakeup	/* resume path */
+	sw	k0, 0x001c(t3)
+.endm
+
+.macro	DO_SLEEP
+	/* put power supply and processor to sleep */
+	sw	zero, 0x0078(t3)	/* sys_slppwr */
+	sync
+	sw	zero, 0x007c(t3)	/* sys_sleep */
+	sync
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+.endm
+
+/* sleep code for Au1000/Au1100/Au1500 memory controller type */
+LEAF(alchemy_sleep_au1000)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 1f
+	.set	arch=r4000
+	cache	0x14, 0(t0)
+	cache	0x14, 32(t0)
+	cache	0x14, 64(t0)
+	cache	0x14, 96(t0)
+	.set	mips0
+
+1:	lui	a0, 0xb400		/* mem_xxx */
+	sw	zero, 0x001c(a0)	/* Precharge */
+	sync
+	sw	zero, 0x0020(a0)	/* Auto Refresh */
+	sync
+	sw	zero, 0x0030(a0)	/* Sleep */
+	sync
+
+	DO_SLEEP
+
+END(alchemy_sleep_au1000)
+
+/* sleep code for Au1550/Au1200 memory controller type */
+LEAF(alchemy_sleep_au1550)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 1f
+	.set	arch=r4000
+	cache	0x14, 0(t0)
+	cache	0x14, 32(t0)
+	cache	0x14, 64(t0)
+	cache	0x14, 96(t0)
+	.set	mips0
+
+1:	lui	a0, 0xb400		/* mem_xxx */
+	sw	zero, 0x08c0(a0)	/* Precharge */
+	sync
+	sw	zero, 0x08d0(a0)	/* Self Refresh */
+	sync
+
+	/* wait for sdram to enter self-refresh mode */
+	lui	t0, 0x0100
+2:	lw	t1, 0x0850(a0)		/* mem_sdstat */
+	and	t2, t1, t0
+	beq	t2, zero, 2b
+	 nop
+
+	/* disable SDRAM clocks */
+	lui	t0, 0xcfff
+	ori	t0, t0, 0xffff
+	lw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	and	t1, t0, t1		/* clear CE[1:0] */
+	sw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	sync
+
+	DO_SLEEP
+
+END(alchemy_sleep_au1550)
+
+/* sleepcode for Au1300 memory controller type */
+LEAF(alchemy_sleep_au1300)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 2f
+	la	t1, 4f
+	subu	t2, t1, t0
+
+	.set	arch=r4000
+
+1:	cache	0x14, 0(t0)
+	subu	t2, t2, 32
+	bgez	t2, 1b
+	 addu	t0, t0, 32
+
+	.set	mips0
+
+2:	lui	a0, 0xb400		/* mem_xxx */
+
+	/* disable all ports in mem_sdportcfga */
+	sw	zero, 0x868(a0)		/* mem_sdportcfga */
+	sync
+
+	/* disable ODT */
+	li	t0, 0x03010000
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sync
+
+	/* precharge */
+	li	t0, 0x23000400
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sync
+
+	/* auto refresh */
+	sw	zero, 0x08c8(a0)	/* mem_sdautoref */
+	sync
+
+	/* block access to the DDR */
+	lw	t0, 0x0848(a0)		/* mem_sdconfigb */
+	li	t1, (1 << 7 | 0x3F)
+	or	t0, t0, t1
+	sw	t0, 0x0848(a0)		/* mem_sdconfigb */
+	sync
+
+	/* issue the Self Refresh command */
+	li	t0, 0x10000000
+	sw	t0, 0x08dc(a0)		/* mem_sdcmd1 */
+	sw	t0, 0x08d8(a0)		/* mem_sdcmd0 */
+	sync
+
+	/* wait for sdram to enter self-refresh mode */
+	lui	t0, 0x0300
+3:	lw	t1, 0x0850(a0)		/* mem_sdstat */
+	and	t2, t1, t0
+	bne	t2, t0, 3b
+	 nop
+
+	/* disable SDRAM clocks */
+	li	t0, ~(3<<28)
+	lw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	and	t1, t1, t0		/* clear CE[1:0] */
+	sw	t1, 0x0840(a0)		/* mem_sdconfiga */
+	sync
+
+	DO_SLEEP
+4:
+
+END(alchemy_sleep_au1300)
+
+
+	/* This is where we return upon wakeup.
+	 * Reload all of the registers and return.
+	 */
+LEAF(alchemy_sleep_wakeup)
+	lw	k0, 0x20(sp)
+	mtc0	k0, CP0_STATUS
+	lw	k0, 0x1c(sp)
+	mtc0	k0, CP0_CONTEXT
+	lw	k0, 0x18(sp)
+	mtc0	k0, CP0_PAGEMASK
+	lw	k0, 0x14(sp)
+	mtc0	k0, CP0_CONFIG
+
+	/* We need to catch the early Alchemy SOCs with
+	 * the write-only Config[OD] bit and set it back to one...
+	 */
+	jal	au1x00_fixup_config_od
+	 nop
+	lw	$1, PT_R1(sp)
+	lw	$2, PT_R2(sp)
+	lw	$3, PT_R3(sp)
+	lw	$4, PT_R4(sp)
+	lw	$5, PT_R5(sp)
+	lw	$6, PT_R6(sp)
+	lw	$7, PT_R7(sp)
+	lw	$16, PT_R16(sp)
+	lw	$17, PT_R17(sp)
+	lw	$18, PT_R18(sp)
+	lw	$19, PT_R19(sp)
+	lw	$20, PT_R20(sp)
+	lw	$21, PT_R21(sp)
+	lw	$22, PT_R22(sp)
+	lw	$23, PT_R23(sp)
+	lw	$26, PT_R26(sp)
+	lw	$27, PT_R27(sp)
+	lw	$28, PT_R28(sp)
+	lw	$30, PT_R30(sp)
+	lw	$31, PT_R31(sp)
+	jr	ra
+	 addiu	sp, PT_SIZE
+END(alchemy_sleep_wakeup)
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
new file mode 100644
index 000000000..d794ffb67
--- /dev/null
+++ b/arch/mips/alchemy/common/time.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com>
+ *
+ * Previous incarnations were:
+ * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
+ * Copied and modified Carsten Langgaard's time.c
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ * ########################################################################
+ *
+ * Clocksource/event using the 32.768kHz-clocked Counter1 ('RTC' in the
+ * databooks).  Firmware/Board init code must enable the counters in the
+ * counter control register, otherwise the CP0 counter clocksource/event
+ * will be installed instead (and use of 'wait' instruction is prohibited).
+ */
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/idle.h>
+#include <asm/processor.h>
+#include <asm/time.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* 32kHz clock enabled and detected */
+#define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
+
+static u64 au1x_counter1_read(struct clocksource *cs)
+{
+	return alchemy_rdsys(AU1000_SYS_RTCREAD);
+}
+
+static struct clocksource au1x_counter1_clocksource = {
+	.name		= "alchemy-counter1",
+	.read		= au1x_counter1_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.rating		= 1500,
+};
+
+static int au1x_rtcmatch2_set_next_event(unsigned long delta,
+					 struct clock_event_device *cd)
+{
+	delta += alchemy_rdsys(AU1000_SYS_RTCREAD);
+	/* wait for register access */
+	while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M21)
+		;
+	alchemy_wrsys(delta, AU1000_SYS_RTCMATCH2);
+
+	return 0;
+}
+
+static irqreturn_t au1x_rtcmatch2_irq(int irq, void *dev_id)
+{
+	struct clock_event_device *cd = dev_id;
+	cd->event_handler(cd);
+	return IRQ_HANDLED;
+}
+
+static struct clock_event_device au1x_rtcmatch2_clockdev = {
+	.name		= "rtcmatch2",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 1500,
+	.set_next_event = au1x_rtcmatch2_set_next_event,
+	.cpumask	= cpu_possible_mask,
+};
+
+static int __init alchemy_time_init(unsigned int m2int)
+{
+	struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
+	unsigned long t;
+
+	au1x_rtcmatch2_clockdev.irq = m2int;
+
+	/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
+	 * has been detected.  If so install the rtcmatch2 clocksource,
+	 * otherwise don't bother.  Note that both bits being set is by
+	 * no means a definite guarantee that the counters actually work
+	 * (the 32S bit seems to be stuck set to 1 once a single clock-
+	 * edge is detected, hence the timeouts).
+	 */
+	if (CNTR_OK != (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & CNTR_OK))
+		goto cntr_err;
+
+	/*
+	 * setup counter 1 (RTC) to tick at full speed
+	 */
+	t = 0xffffff;
+	while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_T1S) && --t)
+		asm volatile ("nop");
+	if (!t)
+		goto cntr_err;
+
+	alchemy_wrsys(0, AU1000_SYS_RTCTRIM);	/* 32.768 kHz */
+
+	t = 0xffffff;
+	while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t)
+		asm volatile ("nop");
+	if (!t)
+		goto cntr_err;
+	alchemy_wrsys(0, AU1000_SYS_RTCWRITE);
+
+	t = 0xffffff;
+	while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C1S) && --t)
+		asm volatile ("nop");
+	if (!t)
+		goto cntr_err;
+
+	/* register counter1 clocksource and event device */
+	clocksource_register_hz(&au1x_counter1_clocksource, 32768);
+
+	cd->shift = 32;
+	cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
+	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
+	cd->max_delta_ticks = 0xffffffff;
+	cd->min_delta_ns = clockevent_delta2ns(9, cd);
+	cd->min_delta_ticks = 9;	/* ~0.28ms */
+	clockevents_register_device(cd);
+	if (request_irq(m2int, au1x_rtcmatch2_irq, IRQF_TIMER, "timer",
+			&au1x_rtcmatch2_clockdev))
+		pr_err("Failed to register timer interrupt\n");
+
+	printk(KERN_INFO "Alchemy clocksource installed\n");
+
+	return 0;
+
+cntr_err:
+	return -1;
+}
+
+static int alchemy_m2inttab[] __initdata = {
+	AU1000_RTC_MATCH2_INT,
+	AU1500_RTC_MATCH2_INT,
+	AU1100_RTC_MATCH2_INT,
+	AU1550_RTC_MATCH2_INT,
+	AU1200_RTC_MATCH2_INT,
+	AU1300_RTC_MATCH2_INT,
+};
+
+void __init plat_time_init(void)
+{
+	int t;
+
+	t = alchemy_get_cputype();
+	if (t == ALCHEMY_CPU_UNKNOWN ||
+	    alchemy_time_init(alchemy_m2inttab[t]))
+		cpu_wait = NULL;	/* wait doesn't work with r4k timer */
+}
diff --git a/arch/mips/alchemy/common/usb.c b/arch/mips/alchemy/common/usb.c
new file mode 100644
index 000000000..a55f32bf5
--- /dev/null
+++ b/arch/mips/alchemy/common/usb.c
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * USB block power/access management abstraction.
+ *
+ * Au1000+: The OHCI block control register is at the far end of the OHCI memory
+ *	    area. Au1550 has OHCI on different base address. No need to handle
+ *	    UDC here.
+ * Au1200:  one register to control access and clocks to O/EHCI, UDC and OTG
+ *	    as well as the PHY for EHCI and UDC.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+#include <asm/cpu.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* control register offsets */
+#define AU1000_OHCICFG	0x7fffc
+#define AU1550_OHCICFG	0x07ffc
+#define AU1200_USBCFG	0x04
+
+/* Au1000 USB block config bits */
+#define USBHEN_RD	(1 << 4)		/* OHCI reset-done indicator */
+#define USBHEN_CE	(1 << 3)		/* OHCI block clock enable */
+#define USBHEN_E	(1 << 2)		/* OHCI block enable */
+#define USBHEN_C	(1 << 1)		/* OHCI block coherency bit */
+#define USBHEN_BE	(1 << 0)		/* OHCI Big-Endian */
+
+/* Au1200 USB config bits */
+#define USBCFG_PFEN	(1 << 31)		/* prefetch enable (undoc) */
+#define USBCFG_RDCOMB	(1 << 30)		/* read combining (undoc) */
+#define USBCFG_UNKNOWN	(5 << 20)		/* unknown, leave this way */
+#define USBCFG_SSD	(1 << 23)		/* serial short detect en */
+#define USBCFG_PPE	(1 << 19)		/* HS PHY PLL */
+#define USBCFG_UCE	(1 << 18)		/* UDC clock enable */
+#define USBCFG_ECE	(1 << 17)		/* EHCI clock enable */
+#define USBCFG_OCE	(1 << 16)		/* OHCI clock enable */
+#define USBCFG_FLA(x)	(((x) & 0x3f) << 8)
+#define USBCFG_UCAM	(1 << 7)		/* coherent access (undoc) */
+#define USBCFG_GME	(1 << 6)		/* OTG mem access */
+#define USBCFG_DBE	(1 << 5)		/* UDC busmaster enable */
+#define USBCFG_DME	(1 << 4)		/* UDC mem enable */
+#define USBCFG_EBE	(1 << 3)		/* EHCI busmaster enable */
+#define USBCFG_EME	(1 << 2)		/* EHCI mem enable */
+#define USBCFG_OBE	(1 << 1)		/* OHCI busmaster enable */
+#define USBCFG_OME	(1 << 0)		/* OHCI mem enable */
+#define USBCFG_INIT_AU1200	(USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
+				 USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
+				 USBCFG_GME | USBCFG_DBE | USBCFG_DME |	       \
+				 USBCFG_EBE | USBCFG_EME | USBCFG_OBE |	       \
+				 USBCFG_OME)
+
+/* Au1300 USB config registers */
+#define USB_DWC_CTRL1		0x00
+#define USB_DWC_CTRL2		0x04
+#define USB_VBUS_TIMER		0x10
+#define USB_SBUS_CTRL		0x14
+#define USB_MSR_ERR		0x18
+#define USB_DWC_CTRL3		0x1C
+#define USB_DWC_CTRL4		0x20
+#define USB_OTG_STATUS		0x28
+#define USB_DWC_CTRL5		0x2C
+#define USB_DWC_CTRL6		0x30
+#define USB_DWC_CTRL7		0x34
+#define USB_PHY_STATUS		0xC0
+#define USB_INT_STATUS		0xC4
+#define USB_INT_ENABLE		0xC8
+
+#define USB_DWC_CTRL1_OTGD	0x04 /* set to DISable OTG */
+#define USB_DWC_CTRL1_HSTRS	0x02 /* set to ENable EHCI */
+#define USB_DWC_CTRL1_DCRS	0x01 /* set to ENable UDC */
+
+#define USB_DWC_CTRL2_PHY1RS	0x04 /* set to enable PHY1 */
+#define USB_DWC_CTRL2_PHY0RS	0x02 /* set to enable PHY0 */
+#define USB_DWC_CTRL2_PHYRS	0x01 /* set to enable PHY */
+
+#define USB_DWC_CTRL3_OHCI1_CKEN	(1 << 19)
+#define USB_DWC_CTRL3_OHCI0_CKEN	(1 << 18)
+#define USB_DWC_CTRL3_EHCI0_CKEN	(1 << 17)
+#define USB_DWC_CTRL3_OTG0_CKEN		(1 << 16)
+
+#define USB_SBUS_CTRL_SBCA		0x04 /* coherent access */
+
+#define USB_INTEN_FORCE			0x20
+#define USB_INTEN_PHY			0x10
+#define USB_INTEN_UDC			0x08
+#define USB_INTEN_EHCI			0x04
+#define USB_INTEN_OHCI1			0x02
+#define USB_INTEN_OHCI0			0x01
+
+static DEFINE_SPINLOCK(alchemy_usb_lock);
+
+static inline void __au1300_usb_phyctl(void __iomem *base, int enable)
+{
+	unsigned long r, s;
+
+	r = __raw_readl(base + USB_DWC_CTRL2);
+	s = __raw_readl(base + USB_DWC_CTRL3);
+
+	s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN |
+		USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN;
+
+	if (enable) {
+		/* simply enable all PHYs */
+		r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
+		     USB_DWC_CTRL2_PHYRS;
+		__raw_writel(r, base + USB_DWC_CTRL2);
+		wmb();
+	} else if (!s) {
+		/* no USB block active, do disable all PHYs */
+		r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
+		       USB_DWC_CTRL2_PHYRS);
+		__raw_writel(r, base + USB_DWC_CTRL2);
+		wmb();
+	}
+}
+
+static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
+{
+	unsigned long r;
+
+	if (enable) {
+		__raw_writel(1, base + USB_DWC_CTRL7);	/* start OHCI clock */
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);	/* enable OHCI block */
+		r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
+			       : USB_DWC_CTRL3_OHCI1_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);	/* power up the PHYs */
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		/* reset the OHCI start clock bit */
+		__raw_writel(0, base + USB_DWC_CTRL7);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1);
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
+				 : USB_DWC_CTRL3_OHCI1_CKEN);
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_ehci_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r |= USB_DWC_CTRL3_EHCI0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_HSTRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= USB_INTEN_EHCI;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~USB_INTEN_EHCI;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_HSTRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~USB_DWC_CTRL3_EHCI0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_udc_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_DCRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r |= USB_INTEN_UDC;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+	} else {
+		r = __raw_readl(base + USB_INT_ENABLE);
+		r &= ~USB_INTEN_UDC;
+		__raw_writel(r, base + USB_INT_ENABLE);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_DCRS;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline void __au1300_otg_control(void __iomem *base, int enable)
+{
+	unsigned long r;
+	if (enable) {
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r |= USB_DWC_CTRL3_OTG0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r &= ~USB_DWC_CTRL1_OTGD;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	} else {
+		r = __raw_readl(base + USB_DWC_CTRL1);
+		r |= USB_DWC_CTRL1_OTGD;
+		__raw_writel(r, base + USB_DWC_CTRL1);
+		wmb();
+
+		r = __raw_readl(base + USB_DWC_CTRL3);
+		r &= ~USB_DWC_CTRL3_OTG0_CKEN;
+		__raw_writel(r, base + USB_DWC_CTRL3);
+		wmb();
+
+		__au1300_usb_phyctl(base, enable);
+	}
+}
+
+static inline int au1300_usb_control(int block, int enable)
+{
+	void __iomem *base =
+		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		__au1300_ohci_control(base, enable, 0);
+		break;
+	case ALCHEMY_USB_OHCI1:
+		__au1300_ohci_control(base, enable, 1);
+		break;
+	case ALCHEMY_USB_EHCI0:
+		__au1300_ehci_control(base, enable);
+		break;
+	case ALCHEMY_USB_UDC0:
+		__au1300_udc_control(base, enable);
+		break;
+	case ALCHEMY_USB_OTG0:
+		__au1300_otg_control(base, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+static inline void au1300_usb_init(void)
+{
+	void __iomem *base =
+		(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+
+	/* set some sane defaults.  Note: we don't fiddle with DWC_CTRL4
+	 * here at all: Port 2 routing (EHCI or UDC) must be set either
+	 * by boot firmware or platform init code; I can't autodetect
+	 * a sane setting.
+	 */
+	__raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */
+	wmb();
+	__raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */
+	wmb();
+	__raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */
+	wmb();
+	__raw_writel(~0, base + USB_INT_STATUS); /* clear int status */
+	wmb();
+	/* set coherent access bit */
+	__raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL);
+	wmb();
+}
+
+static inline void __au1200_ohci_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
+		wmb();
+		udelay(2000);
+	} else {
+		__raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	}
+}
+
+static inline void __au1200_ehci_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	} else {
+		if (!(r & USBCFG_UCE))		/* UDC also off? */
+			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
+		__raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
+		wmb();
+		udelay(1000);
+	}
+}
+
+static inline void __au1200_udc_control(void __iomem *base, int enable)
+{
+	unsigned long r = __raw_readl(base + AU1200_USBCFG);
+	if (enable) {
+		__raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
+		wmb();
+	} else {
+		if (!(r & USBCFG_ECE))		/* EHCI also off? */
+			r &= ~USBCFG_PPE;	/* yes: disable HS PHY PLL */
+		__raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
+		wmb();
+	}
+}
+
+static inline int au1200_usb_control(int block, int enable)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		__au1200_ohci_control(base, enable);
+		break;
+	case ALCHEMY_USB_UDC0:
+		__au1200_udc_control(base, enable);
+		break;
+	case ALCHEMY_USB_EHCI0:
+		__au1200_ehci_control(base, enable);
+		break;
+	default:
+		return -ENODEV;
+	}
+	return 0;
+}
+
+
+/* initialize USB block(s) to a known working state */
+static inline void au1200_usb_init(void)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+	__raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
+	wmb();
+	udelay(1000);
+}
+
+static inline int au1000_usb_init(unsigned long rb, int reg)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
+	unsigned long r = __raw_readl(base);
+	struct clk *c;
+
+	/* 48MHz check. Don't init if no one can provide it */
+	c = clk_get(NULL, "usbh_clk");
+	if (IS_ERR(c))
+		return -ENODEV;
+	if (clk_round_rate(c, 48000000) != 48000000) {
+		clk_put(c);
+		return -ENODEV;
+	}
+	if (clk_set_rate(c, 48000000)) {
+		clk_put(c);
+		return -ENODEV;
+	}
+	clk_put(c);
+
+#if defined(__BIG_ENDIAN)
+	r |= USBHEN_BE;
+#endif
+	r |= USBHEN_C;
+
+	__raw_writel(r, base);
+	wmb();
+	udelay(1000);
+
+	return 0;
+}
+
+
+static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
+	unsigned long r = __raw_readl(base + creg);
+	struct clk *c = clk_get(NULL, "usbh_clk");
+
+	if (IS_ERR(c))
+		return;
+
+	if (enable) {
+		if (clk_prepare_enable(c))
+			goto out;
+
+		__raw_writel(r | USBHEN_CE, base + creg);
+		wmb();
+		udelay(1000);
+		__raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
+		wmb();
+		udelay(1000);
+
+		/* wait for reset complete (read reg twice: au1500 erratum) */
+		while (__raw_readl(base + creg),
+			!(__raw_readl(base + creg) & USBHEN_RD))
+			udelay(1000);
+	} else {
+		__raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
+		wmb();
+		clk_disable_unprepare(c);
+	}
+out:
+	clk_put(c);
+}
+
+static inline int au1000_usb_control(int block, int enable, unsigned long rb,
+				     int creg)
+{
+	int ret = 0;
+
+	switch (block) {
+	case ALCHEMY_USB_OHCI0:
+		__au1xx0_ohci_control(enable, rb, creg);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	return ret;
+}
+
+/*
+ * alchemy_usb_control - control Alchemy on-chip USB blocks
+ * @block:	USB block to target
+ * @enable:	set 1 to enable a block, 0 to disable
+ */
+int alchemy_usb_control(int block, int enable)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&alchemy_usb_lock, flags);
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		ret = au1000_usb_control(block, enable,
+			AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		ret = au1000_usb_control(block, enable,
+			AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		ret = au1200_usb_control(block, enable);
+		break;
+	case ALCHEMY_CPU_AU1300:
+		ret = au1300_usb_control(block, enable);
+		break;
+	default:
+		ret = -ENODEV;
+	}
+	spin_unlock_irqrestore(&alchemy_usb_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(alchemy_usb_control);
+
+
+static unsigned long alchemy_usb_pmdata[2];
+
+static void au1000_usb_pm(unsigned long br, int creg, int susp)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(br);
+
+	if (susp) {
+		alchemy_usb_pmdata[0] = __raw_readl(base + creg);
+		/* There appears to be some undocumented reset register.... */
+		__raw_writel(0, base + 0x04);
+		wmb();
+		__raw_writel(0, base + creg);
+		wmb();
+	} else {
+		__raw_writel(alchemy_usb_pmdata[0], base + creg);
+		wmb();
+	}
+}
+
+static void au1200_usb_pm(int susp)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
+	if (susp) {
+		/* save OTG_CAP/MUX registers which indicate port routing */
+		/* FIXME: write an OTG driver to do that */
+		alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
+		alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
+	} else {
+		/* restore access to all MMIO areas */
+		au1200_usb_init();
+
+		/* restore OTG_CAP/MUX registers */
+		__raw_writel(alchemy_usb_pmdata[0], base + 0x00);
+		__raw_writel(alchemy_usb_pmdata[1], base + 0x04);
+		wmb();
+	}
+}
+
+static void au1300_usb_pm(int susp)
+{
+	void __iomem *base =
+			(void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
+	/* remember Port2 routing */
+	if (susp) {
+		alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4);
+	} else {
+		au1300_usb_init();
+		__raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4);
+		wmb();
+	}
+}
+
+static void alchemy_usb_pm(int susp)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1200_usb_pm(susp);
+		break;
+	case ALCHEMY_CPU_AU1300:
+		au1300_usb_pm(susp);
+		break;
+	}
+}
+
+static int alchemy_usb_suspend(void *data)
+{
+	alchemy_usb_pm(1);
+	return 0;
+}
+
+static void alchemy_usb_resume(void *data)
+{
+	alchemy_usb_pm(0);
+}
+
+static const struct syscore_ops alchemy_usb_pm_syscore_ops = {
+	.suspend	= alchemy_usb_suspend,
+	.resume		= alchemy_usb_resume,
+};
+
+static struct syscore alchemy_usb_pm_syscore = {
+	.ops = &alchemy_usb_pm_syscore_ops,
+};
+
+static int __init alchemy_usb_init(void)
+{
+	int ret = 0;
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		ret = au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR,
+				      AU1000_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		ret = au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR,
+				      AU1550_OHCICFG);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1200_usb_init();
+		break;
+	case ALCHEMY_CPU_AU1300:
+		au1300_usb_init();
+		break;
+	}
+
+	if (!ret)
+		register_syscore(&alchemy_usb_pm_syscore);
+
+	return ret;
+}
+arch_initcall(alchemy_usb_init);
diff --git a/arch/mips/alchemy/common/vss.c b/arch/mips/alchemy/common/vss.c
new file mode 100644
index 000000000..3d0d468d9
--- /dev/null
+++ b/arch/mips/alchemy/common/vss.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Au1300 media block power gating (VSS)
+ *
+ * This is a stop-gap solution until I have the clock framework integration
+ * ready. This stuff here really must be handled transparently when clocks
+ * for various media blocks are enabled/disabled.
+ */
+
+#include <linux/export.h>
+#include <linux/spinlock.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define VSS_GATE	0x00	/* gate wait timers */
+#define VSS_CLKRST	0x04	/* clock/block control */
+#define VSS_FTR		0x08	/* footers */
+
+#define VSS_ADDR(blk)	(KSEG1ADDR(AU1300_VSS_PHYS_ADDR) + (blk * 0x0c))
+
+static DEFINE_SPINLOCK(au1300_vss_lock);
+
+/* enable a block as outlined in the databook */
+static inline void __enable_block(int block)
+{
+	void __iomem *base = (void __iomem *)VSS_ADDR(block);
+
+	__raw_writel(3, base + VSS_CLKRST);	/* enable clock, assert reset */
+	wmb();
+
+	__raw_writel(0x01fffffe, base + VSS_GATE); /* maximum setup time */
+	wmb();
+
+	/* enable footers in sequence */
+	__raw_writel(0x01, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x03, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x07, base + VSS_FTR);
+	wmb();
+	__raw_writel(0x0f, base + VSS_FTR);
+	wmb();
+
+	__raw_writel(0x01ffffff, base + VSS_GATE); /* start FSM too */
+	wmb();
+
+	__raw_writel(2, base + VSS_CLKRST);	/* deassert reset */
+	wmb();
+
+	__raw_writel(0x1f, base + VSS_FTR);	/* enable isolation cells */
+	wmb();
+}
+
+/* disable a block as outlined in the databook */
+static inline void __disable_block(int block)
+{
+	void __iomem *base = (void __iomem *)VSS_ADDR(block);
+
+	__raw_writel(0x0f, base + VSS_FTR);	/* disable isolation cells */
+	wmb();
+	__raw_writel(0, base + VSS_GATE);	/* disable FSM */
+	wmb();
+	__raw_writel(3, base + VSS_CLKRST);	/* assert reset */
+	wmb();
+	__raw_writel(1, base + VSS_CLKRST);	/* disable clock */
+	wmb();
+	__raw_writel(0, base + VSS_FTR);	/* disable all footers */
+	wmb();
+}
+
+void au1300_vss_block_control(int block, int enable)
+{
+	unsigned long flags;
+
+	if (alchemy_get_cputype() != ALCHEMY_CPU_AU1300)
+		return;
+
+	/* only one block at a time */
+	spin_lock_irqsave(&au1300_vss_lock, flags);
+	if (enable)
+		__enable_block(block);
+	else
+		__disable_block(block);
+	spin_unlock_irqrestore(&au1300_vss_lock, flags);
+}
+EXPORT_SYMBOL_GPL(au1300_vss_block_control);