Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Fix error output of boot instance creation failure

   Currently if a boot instance creation fails, instead of printing out
   the name of the instance that failed, it prints "(null)". That is
   because it prints "cur_str" that had already been processed by
   strsep(). Print the saved name instead.

   While at it, print the error code of the failure.

 - Fix use-after-free for same named historgrams

   Histograms can be named so that they can be used in multiple events.
   But if the named histogram has a variable attached, the second event
   that uses the named histogram which duplicates it and needs to free
   the original after duplication leaves the old variable in place and
   still visible. If another histogram uses than variable, it will use
   the stale one which will try to reference the freed duplicate
   histogram and crash the kernel.

   Free the duplicate variables along with the duplicated histogram
   data.

 - Check return value of kthread_run() in event self test

   The events self tests uses a kthread for testing but does not check
   if it succeeded in creating a kthread. If the kthread creation were
   to fail, the code will still try to call kthread_stop() on the error
   returned.

 - Fix race between reading trace_pipe and updating subbuffer size

   If a user is reading the trace_pipe file at the same time they update
   the ring buffer sub-buffer size, can cause the trace_pipe read to
   read stale data. Add trace_access_lock() around updating the ring
   buffer sub-buffer size.

 - Fix eventfs_inode on failure path in creation of the events directory

   In the creation of the "events" directory, if after allocating the
   eventfs_inode a failure is detected, it calls cleanup_ei() which
   calls free_ei(). The free_ei() will test if eventfs_inode being freed
   has no children. It is a bug if it does. But on the failure case of
   the creation of the "events" directory, the children lists have not
   yet been initialized and the free will trigger a warning because
   list_empty() on an uninitialized list returns false.

   Move the initialization into init_ei() where it makes more sense and
   makes sure that a created eventfs_inode has its lists initialized
   upon creation.

 - Check return value of kthread_run() in ftrace direct sample code

   The sample code that shows how to use the ftrace direct calls does
   not test the return of kthread_run() to see if it succeeds. Return a
   failure if the kthread_run() doesn't succeed.

 - Clear user events state on fork in case of alloc failure

   On fork, the child gets a pointer to the parent's user events state.
   It makes a copy of it then updates the child's pointer to it. But if
   the allocation fails, the duplication function leaves the child with
   a pointer to its parent's descriptor. When the child cleans up its
   data, it will free the parent's descriptor while the parent is still
   using it.

   In the duplication function, set the child's user_event_mm to NULL
   before testing if the allocation succeeded, and when it exits it will
   not free the parent's descriptor.

 - Fix retry exhaustion in simple ring buffer reader swap

   simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
   post-decrements it only after a failed link replacement. On the final
   attempt, a successful replacement leaves retry at zero, while a
   failed replacement leaves it at -1.

   But the check for success expects the retry value to be non-zero and
   exits with an error on zero. This is the opposite result. Fix it.

 - Fail nicely when the remote swap_reader_page() returns an error

   Currently, if the swap_reader_page() of a remote buffer fails, it
   triggers a WARN_ON_ONCE() and continues normally. Instead, have it
   exit with an error and a pr_warn() print instead of a full WARNING.

* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Stop remote reader update when page swap fails
  tracing: Fix retry exhaustion in simple ring buffer reader swap
  tracing/user_events: Clear copied tracing state before fork duplication
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
  eventfs: Initialize ei->children and ei->list in init_ei()
  tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
  tracing: Fix crash passing ERR_PTR to kthread_stop()
  tracing: Fix use-after-free with same-name named triggers
  tracing: Fix logged instance name on creation failure

1 files changed, 570 insertions, 0 deletions

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
new file mode 100644
index 000000000..cff1a9a43
--- /dev/null
+++ b/arch/mips/Makefile
@@ -0,0 +1,570 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994, 95, 96, 2003 by Ralf Baechle
+# DECStation modifications by Paul M. Antoine, 1996
+# Copyright (C) 2002, 2003, 2004  Maciej W. Rozycki
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+
+archscripts: scripts_basic
+	$(Q)$(MAKE) $(build)=arch/mips/tools elf-entry
+ifeq ($(CONFIG_CPU_LOONGSON3_WORKAROUNDS),y)
+	$(Q)$(MAKE) $(build)=arch/mips/tools loongson3-llsc-check
+endif
+	$(Q)$(MAKE) $(build)=arch/mips/boot/tools relocs
+
+KBUILD_DEFCONFIG := 32r2el_defconfig
+KBUILD_DTBS      := dtbs
+
+#
+# Select the object file format to substitute into the linker script.
+#
+ifdef CONFIG_CPU_LITTLE_ENDIAN
+32bit-tool-archpref	= mipsel
+64bit-tool-archpref	= mips64el
+32bit-bfd		= elf32-tradlittlemips
+64bit-bfd		= elf64-tradlittlemips
+32bit-emul		= elf32ltsmip
+64bit-emul		= elf64ltsmip
+else
+32bit-tool-archpref	= mips
+64bit-tool-archpref	= mips64
+32bit-bfd		= elf32-tradbigmips
+64bit-bfd		= elf64-tradbigmips
+32bit-emul		= elf32btsmip
+64bit-emul		= elf64btsmip
+endif
+
+ifdef CONFIG_32BIT
+tool-archpref		= $(32bit-tool-archpref)
+UTS_MACHINE		:= mips
+endif
+ifdef CONFIG_64BIT
+tool-archpref		= $(64bit-tool-archpref)
+UTS_MACHINE		:= mips64
+endif
+
+ifdef cross_compiling
+  ifeq ($(CROSS_COMPILE),)
+    CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux-  $(tool-archpref)-linux-gnu-  $(tool-archpref)-unknown-linux-gnu-)
+  endif
+endif
+
+ifdef CONFIG_FUNCTION_GRAPH_TRACER
+  ifndef KBUILD_MCOUNT_RA_ADDRESS
+    ifeq ($(call cc-option-yn,-mmcount-ra-address), y)
+      cflags-y += -mmcount-ra-address -DKBUILD_MCOUNT_RA_ADDRESS
+    endif
+  endif
+endif
+cflags-y += $(call cc-option, -mno-check-zero-division)
+
+ifdef CONFIG_32BIT
+ld-emul			= $(32bit-emul)
+vmlinux-32		= vmlinux
+vmlinux-64		= vmlinux.64
+
+cflags-y		+= -mabi=32
+endif
+
+ifdef CONFIG_64BIT
+ld-emul			= $(64bit-emul)
+vmlinux-32		= vmlinux.32
+vmlinux-64		= vmlinux
+
+cflags-y		+= -mabi=64
+endif
+
+all-$(CONFIG_BOOT_ELF32)	:= $(vmlinux-32)
+all-$(CONFIG_BOOT_ELF64)	:= $(vmlinux-64)
+all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz
+
+#
+# GCC uses -G 0 -mabicalls -fpic as default.  We don't want PIC in the kernel
+# code since it only slows down the whole thing.  At some point we might make
+# use of global pointer optimizations but their use of $28 conflicts with
+# the current pointer optimization.
+#
+# The DECStation requires an ECOFF kernel for remote booting, other MIPS
+# machines may also.  Since BFD is incredibly buggy with respect to
+# crossformat linking we rely on the elf2ecoff tool for format conversion.
+#
+cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+cflags-y			+= -msoft-float -Wa,-msoft-float
+LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+KBUILD_AFLAGS_MODULE		+= -mlong-calls
+KBUILD_CFLAGS_MODULE		+= -mlong-calls
+
+cflags-y += -ffreestanding
+
+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -EB
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -EL
+
+cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
+				   -fno-omit-frame-pointer
+
+# Some distribution-specific toolchains might pass the -fstack-check
+# option during the build, which adds a simple stack-probe at the beginning
+# of every function.  This stack probe is to ensure that there is enough
+# stack space, else a SEGV is generated.  This is not desirable for MIPS
+# as kernel stacks are small, placed in unmapped virtual memory, and do not
+# grow when overflowed.  Especially on SGI IP27 platforms, this check will
+# lead to a NULL pointer dereference in _raw_spin_lock_irq.
+#
+# In disassembly, this stack probe appears at the top of a function as:
+#    sd		zero,<offset>(sp)
+# Where <offset> is a negative value.
+#
+cflags-y += -fno-stack-check
+
+# binutils from v2.35 when built with --enable-mips-fix-loongson3-llsc=yes,
+# supports an -mfix-loongson3-llsc flag which emits a sync prior to each ll
+# instruction to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h
+# for a description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour.
+#
+cflags-y += $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
+
+#
+# CPU-dependent compiler/assembler options for optimization.
+#
+cflags-$(CONFIG_CPU_R3000)	+= $(call cc-option,-march=r3000,-march=mips1)
+cflags-$(CONFIG_CPU_R4300)	+= $(call cc-option,-march=r4300,-march=mips3) -Wa,--trap
+cflags-$(CONFIG_CPU_R4X00)	+= $(call cc-option,-march=r4600,-march=mips3) -Wa,--trap
+cflags-$(CONFIG_CPU_TX49XX)	+= $(call cc-option,-march=r4600,-march=mips3) -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R1)	+= -march=mips32 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R5)	+= -march=mips32r5 -Wa,--trap -modd-spreg
+cflags-$(CONFIG_CPU_MIPS32_R6)	+= -march=mips32r6 -Wa,--trap -modd-spreg
+cflags-$(CONFIG_CPU_MIPS64_R1)	+= -march=mips64 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R2)	+= -march=mips64r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R5)	+= -march=mips64r5 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R6)	+= -march=mips64r6 -Wa,--trap
+cflags-$(CONFIG_CPU_P5600)	+= $(call cc-option,-march=p5600,-march=mips32r5) \
+			-Wa,--trap -modd-spreg
+cflags-$(CONFIG_CPU_R5000)	+= $(call cc-option,-march=r5000,-march=mips4) \
+			-Wa,--trap
+cflags-$(CONFIG_CPU_R5500)	+= $(call cc-option,-march=r5500,-march=mips4) \
+			-Wa,--trap
+cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-option,-march=rm5200,-march=mips4) \
+			-Wa,--trap
+cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=mips4) \
+			-Wa,--trap
+cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1,-march=mips64) \
+			-Wa,--trap
+cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-mno-mdmx)
+cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-mno-mips3d)
+cflags-$(CONFIG_CPU_R10000)	+= $(call cc-option,-march=r10000,-march=mips4) \
+			-Wa,--trap
+cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -march=octeon -Wa,--trap
+cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
+cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,--trap
+
+cflags-$(CONFIG_CPU_LOONGSON2E) += \
+			$(call cc-option,-march=loongson2e,-march=mips3) -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2F) += \
+			$(call cc-option,-march=loongson2f,-march=mips3) -Wa,--trap
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi)
+cflags-$(CONFIG_CPU_LOONGSON64)	+= \
+			$(call cc-option,-march=loongson3a,-march=mips64r2) -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi)
+
+cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
+cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
+cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
+cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
+endif
+
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour. If upstream
+# binutils does not merge support for the flag then we can revisit & remove
+# this later - for now it ensures vendor toolchains don't cause problems.
+#
+cflags-$(CONFIG_CPU_LOONGSON64)	+= $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
+
+# For smartmips configurations, there are hundreds of warnings due to ISA overrides
+# in assembly and header files. smartmips is only supported for MIPS32r1 onwards
+# and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or
+# similar directives in the kernel will spam the build logs with the following warnings:
+# Warning: the `smartmips' extension requires MIPS32 revision 1 or greater
+# or
+# Warning: the 64-bit MIPS architecture does not support the `smartmips' extension
+# Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has
+# been fixed properly.
+mips-cflags				:= $(cflags-y)
+ifeq ($(CONFIG_CPU_HAS_SMARTMIPS),y)
+smartmips-ase				:= $(call cc-option-yn,$(mips-cflags) -msmartmips)
+cflags-$(smartmips-ase)			+= -msmartmips -Wa,--no-warn
+endif
+ifeq ($(CONFIG_CPU_MICROMIPS),y)
+micromips-ase				:= $(call cc-option-yn,$(mips-cflags) -mmicromips)
+cflags-$(micromips-ase)			+= -mmicromips
+endif
+ifeq ($(CONFIG_CPU_HAS_MSA),y)
+toolchain-msa				:= $(call cc-option-yn,$(mips-cflags) -mhard-float -mfp64 -Wa$(comma)-mmsa)
+cflags-$(toolchain-msa)			+= -DTOOLCHAIN_SUPPORTS_MSA
+endif
+toolchain-virt				:= $(call cc-option-yn,$(mips-cflags) -mvirt)
+cflags-$(toolchain-virt)		+= -DTOOLCHAIN_SUPPORTS_VIRT
+# For -mmicromips, use -Wa,-fatal-warnings to catch unsupported -mxpa which
+# only warns
+xpa-cflags-y				:= $(mips-cflags)
+xpa-cflags-$(micromips-ase)		+= -mmicromips -Wa$(comma)-fatal-warnings
+toolchain-xpa				:= $(call cc-option-yn,$(xpa-cflags-y) -mxpa)
+cflags-$(toolchain-xpa)			+= -DTOOLCHAIN_SUPPORTS_XPA
+toolchain-crc				:= $(call cc-option-yn,$(mips-cflags) -Wa$(comma)-mcrc)
+cflags-$(toolchain-crc)			+= -DTOOLCHAIN_SUPPORTS_CRC
+toolchain-dsp				:= $(call cc-option-yn,$(mips-cflags) -Wa$(comma)-mdsp)
+cflags-$(toolchain-dsp)			+= -DTOOLCHAIN_SUPPORTS_DSP
+toolchain-ginv				:= $(call cc-option-yn,$(mips-cflags) -Wa$(comma)-mginv)
+cflags-$(toolchain-ginv)		+= -DTOOLCHAIN_SUPPORTS_GINV
+
+#
+# Firmware support
+#
+libs-$(CONFIG_FW_ARC)		+= arch/mips/fw/arc/
+libs-$(CONFIG_FW_CFE)		+= arch/mips/fw/cfe/
+libs-$(CONFIG_FW_SNIPROM)	+= arch/mips/fw/sni/
+libs-y				+= arch/mips/fw/lib/
+
+#
+# Kernel compression
+#
+ifdef CONFIG_SYS_SUPPORTS_ZBOOT
+COMPRESSION_FNAME		= vmlinuz
+else
+COMPRESSION_FNAME		= vmlinux
+endif
+
+#
+# Board-dependent options and extra files
+#
+include $(srctree)/arch/mips/Kbuild.platforms
+
+ifdef CONFIG_PHYSICAL_START
+load-y					= $(CONFIG_PHYSICAL_START)
+endif
+
+entry-y				= $(shell $(objtree)/arch/mips/tools/elf-entry vmlinux)
+cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
+drivers-$(CONFIG_PCI)		+= arch/mips/pci/
+
+#
+# Automatically detect the build format. By default we choose
+# the elf format according to the load address.
+# We can always force a build with a 64-bits symbol format by
+# passing 'KBUILD_SYM32=no' option to the make's command line.
+#
+ifdef CONFIG_64BIT
+  ifndef KBUILD_SYM32
+    ifeq ($(shell expr $(load-y) \< 0xffffffff80000000), 0)
+      KBUILD_SYM32 = $(call cc-option-yn, -msym32)
+    endif
+  endif
+
+  ifeq ($(KBUILD_SYM32), y)
+    cflags-$(KBUILD_SYM32) += -msym32 -DKBUILD_64BIT_SYM32
+  else
+    ifeq ($(CONFIG_CPU_DADDI_WORKAROUNDS), y)
+      $(error CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32)
+    endif
+  endif
+endif
+
+# When linking a 32-bit executable the LLVM linker cannot cope with a
+# 32-bit load address that has been sign-extended to 64 bits.  Simply
+# remove the upper 32 bits then, as it is safe to do so with other
+# linkers.
+ifdef CONFIG_64BIT
+	load-ld			= $(load-y)
+else
+	load-ld			= $(subst 0xffffffff,0x,$(load-y))
+endif
+
+KBUILD_AFLAGS	+= $(cflags-y)
+KBUILD_CFLAGS	+= $(cflags-y)
+KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) -DLINKER_LOAD_ADDRESS=$(load-ld)
+KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
+
+bootvars-y	= VMLINUX_LOAD_ADDRESS=$(load-y) \
+		  LINKER_LOAD_ADDRESS=$(load-ld) \
+		  VMLINUX_ENTRY_ADDRESS=$(entry-y) \
+		  PLATFORM="$(platform-y)" \
+		  ITS_INPUTS="$(its-y)"
+ifdef CONFIG_32BIT
+bootvars-y	+= ADDR_BITS=32
+endif
+ifdef CONFIG_64BIT
+bootvars-y	+= ADDR_BITS=64
+endif
+
+# This is required to get dwarf unwinding tables into .debug_frame
+# instead of .eh_frame so we don't discard them.
+KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
+
+KBUILD_LDFLAGS		+= -m $(ld-emul)
+
+ifdef need-compiler
+CHECKFLAGS += $(shell $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
+	grep -E -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
+	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
+endif
+
+OBJCOPYFLAGS		+= --remove-section=.reginfo
+
+libs-y			+= arch/mips/lib/
+libs-$(CONFIG_MIPS_FP_SUPPORT) += arch/mips/math-emu/
+
+# suspend and hibernation support
+drivers-$(CONFIG_PM)	+= arch/mips/power/
+
+# boot image targets (arch/mips/boot/)
+boot-y			:= vmlinux.bin
+boot-y			+= vmlinux.ecoff
+boot-y			+= vmlinux.srec
+boot-y			+= uImage
+boot-y			+= uImage.bin
+boot-y			+= uImage.bz2
+boot-y			+= uImage.gz
+boot-y			+= uImage.lzma
+boot-y			+= uImage.lzo
+boot-y			+= vmlinux.itb
+boot-y			+= vmlinux.gz.itb
+boot-y			+= vmlinux.bz2.itb
+boot-y			+= vmlinux.lzma.itb
+boot-y			+= vmlinux.lzo.itb
+
+# compressed boot image targets (arch/mips/boot/compressed/)
+bootz-y			:= vmlinuz
+bootz-y			+= vmlinuz.bin
+bootz-y			+= vmlinuz.ecoff
+bootz-y			+= vmlinuz.srec
+bootz-y			+= uzImage.bin
+bootz-y			+= vmlinuz.itb
+
+#
+# Some machines like the Indy need 32-bit ELF binaries for booting purposes.
+# Other need ECOFF, so we build a 32-bit ELF binary for them which we then
+# convert to ECOFF using elf2ecoff.
+#
+quiet_cmd_32 = OBJCOPY $@
+	cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
+vmlinux.32: vmlinux
+	$(call cmd,32)
+
+#
+# The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
+# ELF files from 32-bit files by conversion.
+#
+quiet_cmd_64 = OBJCOPY $@
+	cmd_64 = $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
+vmlinux.64: vmlinux
+	$(call cmd,64)
+
+all:	$(all-y) $(KBUILD_DTBS)
+
+# boot
+$(boot-y): $(vmlinux-32) FORCE
+	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \
+		$(bootvars-y) arch/mips/boot/$@
+
+ifdef CONFIG_SYS_SUPPORTS_ZBOOT
+# boot/compressed
+$(bootz-y): $(vmlinux-32) FORCE
+	$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
+		$(bootvars-y) 32bit-bfd=$(32bit-bfd) arch/mips/boot/$@
+else
+vmlinuz: FORCE
+	@echo '   CONFIG_SYS_SUPPORTS_ZBOOT is not enabled'
+	/bin/false
+endif
+
+
+CLEAN_FILES += vmlinux.32 vmlinux.64
+
+archprepare:
+ifdef CONFIG_MIPS32_N32
+	$(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_instance="N32" missing_syscalls_flags="-mabi=n32"
+endif
+ifdef CONFIG_MIPS32_O32
+	$(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_instance="O32" missing_syscalls_flags="-mabi=32"
+endif
+
+install:
+	$(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
+ifdef CONFIG_SYS_SUPPORTS_ZBOOT
+	$(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE)
+endif
+	$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
+	$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
+
+archheaders:
+	$(Q)$(MAKE) $(build)=arch/mips/kernel/syscalls all
+
+define archhelp
+	echo '  install              - install kernel into $(INSTALL_PATH)'
+	echo '  vmlinux.ecoff        - ECOFF boot image'
+	echo '  vmlinux.bin          - Raw binary boot image'
+	echo '  vmlinux.srec         - SREC boot image'
+	echo '  vmlinux.32           - 64-bit boot image wrapped in 32bits (IP22/IP32)'
+	echo '  vmlinuz              - Compressed boot(zboot) image'
+	echo '  vmlinuz.ecoff        - ECOFF zboot image'
+	echo '  vmlinuz.bin          - Raw binary zboot image'
+	echo '  vmlinuz.srec         - SREC zboot image'
+	echo '  uImage               - U-Boot image'
+	echo '  uImage.bin           - U-Boot image (uncompressed)'
+	echo '  uImage.bz2           - U-Boot image (bz2)'
+	echo '  uImage.gz            - U-Boot image (gzip)'
+	echo '  uImage.lzma          - U-Boot image (lzma)'
+	echo '  uImage.lzo           - U-Boot image (lzo)'
+	echo '  uzImage.bin          - U-Boot image (self-extracting)'
+	echo
+	echo '  These will be default as appropriate for a configured platform.'
+	echo
+	echo '  If you are targeting a system supported by generic kernels you may'
+	echo '  configure the kernel for a given architecture target like so:'
+	echo
+	echo '  {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">'
+	echo
+	echo '  Where BOARDS is some subset of the following:'
+	for board in $(sort $(BOARDS)); do echo "    $${board}"; done
+	echo
+	echo '  Specifically the following generic default configurations are'
+	echo '  supported:'
+	echo
+	$(foreach cfg,$(generic_defconfigs),
+	  printf "  %-24s - Build generic kernel for $(call describe_generic_defconfig,$(cfg))\n" $(cfg);)
+	echo
+	echo '  The following legacy default configurations have been converted to'
+	echo '  generic and can still be used:'
+	echo
+	$(foreach cfg,$(sort $(legacy_defconfigs)),
+	  printf "  %-24s - Build $($(cfg)-y)\n" $(cfg);)
+	echo
+	echo '  Otherwise, the following default configurations are available:'
+endef
+
+generic_config_dir = $(srctree)/arch/$(ARCH)/configs/generic
+generic_defconfigs :=
+
+#
+# If the user generates a generic kernel configuration without specifying a
+# list of boards to include the config fragments for, default to including all
+# available board config fragments.
+#
+ifeq ($(BOARDS),)
+BOARDS = $(patsubst board-%.config,%,$(notdir $(wildcard $(generic_config_dir)/board-*.config)))
+endif
+
+#
+# Generic kernel configurations which merge generic_defconfig with the
+# appropriate config fragments from arch/mips/configs/generic/, resulting in
+# the ability to easily configure the kernel for a given architecture,
+# endianness & set of boards without duplicating the needed configuration in
+# hundreds of defconfig files.
+#
+define gen_generic_defconfigs
+$(foreach bits,$(1),$(foreach rev,$(2),$(foreach endian,$(3),
+target := $(bits)$(rev)$(filter el,$(endian))_defconfig
+generic_defconfigs += $$(target)
+$$(target): $(generic_config_dir)/$(bits)$(rev).config
+$$(target): $(generic_config_dir)/$(endian).config
+)))
+endef
+
+$(eval $(call gen_generic_defconfigs,32 64,r1 r2 r6,eb el))
+$(eval $(call gen_generic_defconfigs,micro32,r2,eb el))
+
+define describe_generic_defconfig
+$(subst 32r,MIPS32 r,$(subst 64r,MIPS64 r,$(subst el, little endian,$(patsubst %_defconfig,%,$(1)))))
+endef
+
+.PHONY: $(generic_defconfigs)
+$(generic_defconfigs):
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
+		-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/generic_defconfig $^ | \
+		grep -Ev '^#'
+	$(Q)cp $(KCONFIG_CONFIG) $(objtree)/.config.$@
+	$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig \
+		KCONFIG_CONFIG=$(objtree)/.config.$@ >/dev/null
+	$(Q)$(CONFIG_SHELL) $(srctree)/arch/$(ARCH)/tools/generic-board-config.sh \
+		$(srctree) $(objtree) $(objtree)/.config.$@ $(KCONFIG_CONFIG) \
+		"$(origin BOARDS)" $(BOARDS)
+	$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
+
+#
+# Prevent generic merge_config rules attempting to merge single fragments
+#
+$(generic_config_dir)/%.config: ;
+
+#
+# Prevent direct use of generic_defconfig, which is intended to be used as the
+# basis of the various ISA-specific targets generated above.
+#
+.PHONY: generic_defconfig
+generic_defconfig:
+	$(Q)echo "generic_defconfig is not intended for direct use, but should instead be"
+	$(Q)echo "used via an ISA-specific target from the following list:"
+	$(Q)echo
+	$(Q)for cfg in $(generic_defconfigs); do echo "  $${cfg}"; done
+	$(Q)echo
+	$(Q)false
+
+#
+# Legacy defconfig compatibility - these targets used to be real defconfigs but
+# now that the boards have been converted to use the generic kernel they are
+# wrappers around the generic rules above.
+#
+legacy_defconfigs		+= ocelot_defconfig
+ocelot_defconfig-y		:= 32r2el_defconfig BOARDS=ocelot
+
+legacy_defconfigs		+= sead3_defconfig
+sead3_defconfig-y		:= 32r2el_defconfig BOARDS=sead-3
+
+legacy_defconfigs		+= sead3micro_defconfig
+sead3micro_defconfig-y		:= micro32r2el_defconfig BOARDS=sead-3
+
+legacy_defconfigs		+= xilfpga_defconfig
+xilfpga_defconfig-y		:= 32r2el_defconfig BOARDS=xilfpga
+
+legacy_defconfigs		+= pistachio_defconfig
+pistachio_defconfig-y		:= 32r2el_defconfig BOARDS=marduk
+
+.PHONY: $(legacy_defconfigs)
+$(legacy_defconfigs):
+	$(Q)$(MAKE) -f $(srctree)/Makefile $($@-y)