Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 259 insertions, 0 deletions

diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
new file mode 100644
index 000000000..848cdee13
--- /dev/null
+++ b/arch/microblaze/mm/init.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/dma-map-ops.h>
+#include <linux/memblock.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h> /* mem_init */
+#include <linux/initrd.h>
+#include <linux/of_fdt.h>
+#include <linux/pagemap.h>
+#include <linux/pfn.h>
+#include <linux/slab.h>
+#include <linux/swap.h>
+#include <linux/export.h>
+
+#include <asm/page.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+#include <asm/tlb.h>
+#include <asm/fixmap.h>
+
+/* Use for MMU and noMMU because of PCI generic code */
+int mem_init_done;
+
+char *klimit = _end;
+
+/*
+ * Initialize the bootmem system and give it all the memory we
+ * have available.
+ */
+unsigned long memory_start;
+EXPORT_SYMBOL(memory_start);
+unsigned long memory_size;
+EXPORT_SYMBOL(memory_size);
+unsigned long lowmem_size;
+
+EXPORT_SYMBOL(min_low_pfn);
+EXPORT_SYMBOL(max_low_pfn);
+
+#ifdef CONFIG_HIGHMEM
+static void __init highmem_init(void)
+{
+	pr_debug("%x\n", (u32)PKMAP_BASE);
+	map_page(PKMAP_BASE, 0, 0);	/* XXX gross */
+	pkmap_page_table = virt_to_kpte(PKMAP_BASE);
+}
+#endif /* CONFIG_HIGHMEM */
+
+void __init arch_zone_limits_init(unsigned long *max_zone_pfns)
+{
+#ifdef CONFIG_HIGHMEM
+	max_zone_pfns[ZONE_DMA] = max_low_pfn;
+	max_zone_pfns[ZONE_HIGHMEM] = max_pfn;
+#else
+	max_zone_pfns[ZONE_DMA] = max_pfn;
+#endif
+}
+
+/*
+ * paging_init() sets up the page tables - in fact we've already done this.
+ */
+static void __init paging_init(void)
+{
+	int idx;
+
+	/* Setup fixmaps */
+	for (idx = 0; idx < __end_of_fixed_addresses; idx++)
+		clear_fixmap(idx);
+
+#ifdef CONFIG_HIGHMEM
+	highmem_init();
+#endif
+}
+
+void __init setup_memory(void)
+{
+	/*
+	 * Kernel:
+	 * start: base phys address of kernel - page align
+	 * end: base phys address of kernel - page align
+	 *
+	 * min_low_pfn - the first page (mm/bootmem.c - node_boot_start)
+	 * max_low_pfn
+	 */
+
+	/* memory start is from the kernel end (aligned) to higher addr */
+	min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */
+	max_low_pfn = ((u64)memory_start + (u64)lowmem_size) >> PAGE_SHIFT;
+	max_pfn = ((u64)memory_start + (u64)memory_size) >> PAGE_SHIFT;
+
+	pr_info("%s: min_low_pfn: %#lx\n", __func__, min_low_pfn);
+	pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
+	pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn);
+
+	paging_init();
+}
+
+void __init mem_init(void)
+{
+	mem_init_done = 1;
+}
+
+int page_is_ram(unsigned long pfn)
+{
+	return pfn < max_low_pfn;
+}
+
+/*
+ * Check for command-line options that affect what MMU_init will do.
+ */
+static void __init mm_cmdline_setup(void)
+{
+	unsigned long maxmem = 0;
+	char *p = cmd_line;
+
+	/* Look for mem= option on command line */
+	p = strstr(cmd_line, "mem=");
+	if (p) {
+		p += 4;
+		maxmem = memparse(p, &p);
+		if (maxmem && memory_size > maxmem) {
+			memory_size = maxmem;
+			memblock.memory.regions[0].size = memory_size;
+		}
+	}
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+static void __init mmu_init_hw(void)
+{
+	/*
+	 * The Zone Protection Register (ZPR) defines how protection will
+	 * be applied to every page which is a member of a given zone. At
+	 * present, we utilize only two of the zones.
+	 * The zone index bits (of ZSEL) in the PTE are used for software
+	 * indicators, except the LSB.  For user access, zone 1 is used,
+	 * for kernel access, zone 0 is used.  We set all but zone 1
+	 * to zero, allowing only kernel access as indicated in the PTE.
+	 * For zone 1, we set a 01 binary (a value of 10 will not work)
+	 * to allow user access as indicated in the PTE.  This also allows
+	 * kernel access as indicated in the PTE.
+	 */
+	__asm__ __volatile__ ("ori r11, r0, 0x10000000;" \
+			"mts rzpr, r11;"
+			: : : "r11");
+}
+
+/*
+ * MMU_init sets up the basic memory mappings for the kernel,
+ * including both RAM and possibly some I/O regions,
+ * and sets up the page tables and the MMU hardware ready to go.
+ */
+
+/* called from head.S */
+asmlinkage void __init mmu_init(void)
+{
+	unsigned int kstart, ksize;
+
+	if ((u32) memblock.memory.regions[0].size < 0x400000) {
+		pr_emerg("Memory must be greater than 4MB\n");
+		machine_restart(NULL);
+	}
+
+	if ((u32) memblock.memory.regions[0].size < kernel_tlb) {
+		pr_emerg("Kernel size is greater than memory node\n");
+		machine_restart(NULL);
+	}
+
+	/* Find main memory where the kernel is */
+	memory_start = (u32) memblock.memory.regions[0].base;
+	lowmem_size = memory_size = (u32) memblock.memory.regions[0].size;
+
+	if (lowmem_size > CONFIG_LOWMEM_SIZE) {
+		lowmem_size = CONFIG_LOWMEM_SIZE;
+#ifndef CONFIG_HIGHMEM
+		memory_size = lowmem_size;
+#endif
+	}
+
+	mm_cmdline_setup(); /* FIXME parse args from command line - not used */
+
+	/*
+	 * Map out the kernel text/data/bss from the available physical
+	 * memory.
+	 */
+	kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
+	/* kernel size */
+	ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
+	memblock_reserve(kstart, ksize);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+	/* Remove the init RAM disk from the available memory. */
+	if (initrd_start) {
+		unsigned long size;
+		size = initrd_end - initrd_start;
+		memblock_reserve(__virt_to_phys(initrd_start), size);
+	}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+	/* Initialize the MMU hardware */
+	mmu_init_hw();
+
+	/* Map in all of RAM starting at CONFIG_KERNEL_START */
+	mapin_ram();
+
+	/* Extend vmalloc and ioremap area as big as possible */
+#ifdef CONFIG_HIGHMEM
+	ioremap_base = ioremap_bot = PKMAP_BASE;
+#else
+	ioremap_base = ioremap_bot = FIXADDR_START;
+#endif
+
+	/* Initialize the context management stuff */
+	mmu_context_init();
+
+	/* Shortly after that, the entire linear mapping will be available */
+	/* This will also cause that unflatten device tree will be allocated
+	 * inside 768MB limit */
+	memblock_set_current_limit(memory_start + lowmem_size - 1);
+
+	parse_early_param();
+
+	early_init_fdt_scan_reserved_mem();
+
+	/* CMA initialization */
+	dma_contiguous_reserve(memory_start + lowmem_size - 1);
+
+	memblock_dump_all();
+}
+
+static const pgprot_t protection_map[16] = {
+	[VM_NONE]					= PAGE_NONE,
+	[VM_READ]					= PAGE_READONLY_X,
+	[VM_WRITE]					= PAGE_COPY,
+	[VM_WRITE | VM_READ]				= PAGE_COPY_X,
+	[VM_EXEC]					= PAGE_READONLY,
+	[VM_EXEC | VM_READ]				= PAGE_READONLY_X,
+	[VM_EXEC | VM_WRITE]				= PAGE_COPY,
+	[VM_EXEC | VM_WRITE | VM_READ]			= PAGE_COPY_X,
+	[VM_SHARED]					= PAGE_NONE,
+	[VM_SHARED | VM_READ]				= PAGE_READONLY_X,
+	[VM_SHARED | VM_WRITE]				= PAGE_SHARED,
+	[VM_SHARED | VM_WRITE | VM_READ]		= PAGE_SHARED_X,
+	[VM_SHARED | VM_EXEC]				= PAGE_READONLY,
+	[VM_SHARED | VM_EXEC | VM_READ]			= PAGE_READONLY_X,
+	[VM_SHARED | VM_EXEC | VM_WRITE]		= PAGE_SHARED,
+	[VM_SHARED | VM_EXEC | VM_WRITE | VM_READ]	= PAGE_SHARED_X
+};
+DECLARE_VM_GET_PAGE_PROT