Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Don't destroy user event fields when removal fails

   User event fields are destroyed before the event is removed from
   visibility. But that can fail leaving the still visible event with no
   fields. Move the destroying of the fields to after the event is
   successfully removed from visibility.

 - Initialize function graph state is fork before calling
   copy_exec_state()

   For non-CLONE_VM forks, copy_exec_state() allocates a new
   task_exec_state. If that allocation fails, ftrace_graph_exit_task()
   will free the tasks ret_stack pointer. Since that pointer is still
   using the parent's ret_stack, it mistakenly frees the parent's
   pointer too.

   Call ftrace_graph_init() on the task first which will NULL out the
   new tasks's ret_stack and if the copy fails, it will not free
   anything.

 - Remove FGRAPH_MAX_INDEX

   The macro FGRAPH_MAX_INDEX was added but never used. Remove it.

 - Save ent_size in function graph printing of nested functions

   The function graph tracer needs to look at the next event to see if
   the next event is the return of the current function entry. If it is,
   it prints a single line:

	ktime_get();

   Otherwise it prints it like a nested function:

	tick_nohz_irq_exit() {
	    ktime_get();
	    kcpustat_irq_exit();
	}

   In order to look at the next event, it must save the current event so
   that it has the information to print from it. It saves the event in
   the iterator descriptor called "ent". What it doesn't save is the
   ent_size of the event which is now used to know if the function graph
   arguments are to be printed. The peek doesn't save the size so the
   size used happens to be that of the size of the last event that was
   seen.

   Save the entry event size in the iterator descriptor so that the
   correct size is used.

 - Fix several errors with freeing data in the histogram code

   The histogram code had a lot of leaked or or incorrect accounting
   when failures happen. Correct them.

 - Fix histogram regression of .percent and .graph modifiers

   Up until 6.3 histogram values could have "percent" or "graph"
   modifiers that changed how they were printed. But a change that added
   restricting histograms values from being strings, stack traces and
   other modifiers inadvertently prevented them from using the percent
   and graph modifiers, which were legal use cases for values.

   Put back the percent and graph modifiers.

 - Fix various typos in the comments

 - Set the trace_clock before initializing a histogram with clock
   argument

   The histogram API allows the user to specific which trace clock to
   use via a "clock=" string. The histogram is set up first before the
   clock is checked. If the passed in clock is not valid, it exits
   without fully fixing up the histogram leaving it on the list and a
   use-after-free can trigger.

   Update the clock argument first and if it fails then exit gracefully
   before the histogram trigger is placed on any lists.

 - Restore :mod: trailer after parsing in ftrace_set_clr_event

   The function ftrace_set_clr_event() modifies the parse string and
   needs to put it back to what was passed in. It searches for ":mod:"
   via a strsep() but fails to put back the first ':' in the string.

   Add back the ':' in the passed in string.

 - Take trace_array reference when opening a tracer options file

   The options files are dynamically created and some tracers add their
   own options. When a tracer adds their own list of options, the
   trace_array holding them has an array to hold the list of options for
   each tracer. This array increases in size via a krealloc(), and the
   new entry gets a newly allocated array to hold the options of the new
   tracer being added.

   The element in each entry of the tracer's option array holds a
   pointer back to the trace_array, a pointer to the tracer it is
   associated to, a pointer to the flags of the option.

   The issue is that these arrays are freed when the trace_array is
   freed when its instance it represents is removed from the instances
   directory. There's a race that an open of one of these options files
   can happen when the instance is being removed.

   Add a new helper function to be called by the open function of the
   options file to iterate all existing trace_arrays under a lock and
   find the one that has the given option element in one of it's tracer
   arrays. If found, then update the associated trace_array's reference
   counter to keep it from being freed. If not found, have the open call
   return -ENODEV.

 - Disable interrupts when acquiring the lock in rb_wake_up_waiters()

   The function rb_wake_up_waiters() assumes it will be called in
   interrupt context and does not disable irqs when taking
   cpu_buffer->reader_lock, which can be called in hard interrupt
   context. The issue is in PREEMPT_RT, this function is called in
   thread context leaving this lock open to a deadlock.

   Take the lock with interrupts disabled.

 - Use rcu_assign_pointer() for tmp_ops filter hash

   The tmp_ops used in update_ftrace_direct_mod() assigns its
   filter_hash field directly, but that field is annotated as __rcu and
   sparse complains. Assign it with rcu_assign_pointer()

 - Fix use-after-free in enable_trigger_private_data_free()

   The trace_event_call is accessed through the event_trigger_data's
   trace_event_file pointer to put the trace_event_call on freeing. The
   issue is that the trace_event_file data may have been freed already
   causing a use-after-free. Add a field to the event_trigger_data that
   points directly to the trace_event_call so that it can decrement its
   reference directly without needing to go through the
   trace_event_file.

 - Fix accounting of buffer data remote headers

   trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
   the number of pages is needed for the asked for size as it doesn't
   take into account the meta data on each page. Add a helper function
   to do the calculation properly and use that in these functions.

 - Catch nr_page_va overflow in ring_buffer_desc sizing

   The number of pages per remote ring buffer is capped by
   ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
   overflow that field would silently allocate a descriptor smaller than
   what was asked for.

 - Do not resize the subbuf order if any per_cpu buffer is disabled

   The mmapping of ring buffers disables resizing the subbuffers, but it
   is done per-cpu whereas the subbuf size change is done for all the
   per_cpu buffers under the buffer->mutex. It could change the size of
   some while the mapping is happening on others. Have the resize of the
   subbuf order check all the per_cpu buffers under the lock to see if
   any of them is disabled before starting and causing an inconsistency
   between buffers that are being mapped.

* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
  ring-buffer: Check resize_disabled before publishing the new subbuf order
  tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
  tracing/remotes: Account for ring buffer page header in size calculation
  tracing: Don't dereference trace_event_file in deferred trigger free
  ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
  ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
  tracing: Take trace_array reference when opening a tracer options file
  tracing: Fix ring_buffer_read_page_size() kernel-doc
  tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
  tracing: Fix memory corruption from a "STACKTRACE" histogram key
  tracing: Fix memory corruption from the histogram stacktrace modifier
  tracing: Undo the registration when enabling the histogram trigger fails
  tracing: Take the reference before publishing the named histogram trigger
  tracing: Set the trace clock before registering the histogram trigger
  tracing: Fix typo "preceeded" in comment
  tracing: Fix typo "availabe" in comment
  tracing: Let histogram values keep the percent and graph modifiers
  tracing: Keep the entry count when the histogram stats allocation fails
  tracing: Free histogram the field rejected for a bad modifier
  tracing: Free histogram the var ref when its initialization fails
  ...

18 files changed, 1929 insertions, 0 deletions

diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
new file mode 100644
index 000000000..9fe7ab688
--- /dev/null
+++ b/arch/microblaze/lib/Makefile
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile
+#
+
+ifdef CONFIG_FUNCTION_TRACER
+CFLAGS_REMOVE_ashldi3.o = -pg
+CFLAGS_REMOVE_ashrdi3.o = -pg
+CFLAGS_REMOVE_lshrdi3.o = -pg
+endif
+
+lib-y :=  memset.o
+
+ifeq ($(CONFIG_OPT_LIB_ASM),y)
+lib-y += fastcopy.o
+else
+lib-y += memcpy.o memmove.o
+endif
+
+lib-y += uaccess_old.o
+
+# libgcc-style stuff needed in the kernel
+obj-y += ashldi3.o ashrdi3.o cmpdi2.o divsi3.o lshrdi3.o modsi3.o
+obj-y += muldi3.o mulsi3.o ucmpdi2.o udivsi3.o umodsi3.o
diff --git a/arch/microblaze/lib/ashldi3.c b/arch/microblaze/lib/ashldi3.c
new file mode 100644
index 000000000..4d0f9481b
--- /dev/null
+++ b/arch/microblaze/lib/ashldi3.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+long long __ashldi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		w.s.low = 0;
+		w.s.high = (unsigned int) uu.s.low << -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.low >> bm;
+
+		w.s.low = (unsigned int) uu.s.low << b;
+		w.s.high = ((unsigned int) uu.s.high << b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/microblaze/lib/ashrdi3.c b/arch/microblaze/lib/ashrdi3.c
new file mode 100644
index 000000000..268098a96
--- /dev/null
+++ b/arch/microblaze/lib/ashrdi3.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+long long __ashrdi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		/* w.s.high = 1..1 or 0..0 */
+		w.s.high =
+		    uu.s.high >> 31;
+		w.s.low = uu.s.high >> -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+		w.s.high = uu.s.high >> b;
+		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/microblaze/lib/cmpdi2.c b/arch/microblaze/lib/cmpdi2.c
new file mode 100644
index 000000000..b3f896385
--- /dev/null
+++ b/arch/microblaze/lib/cmpdi2.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+word_type __cmpdi2(long long a, long long b)
+{
+	const DWunion au = {
+		.ll = a
+	};
+	const DWunion bu = {
+		.ll = b
+	};
+
+	if (au.s.high < bu.s.high)
+		return 0;
+	else if (au.s.high > bu.s.high)
+		return 2;
+
+	if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+		return 0;
+	else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+		return 2;
+
+	return 1;
+}
+EXPORT_SYMBOL(__cmpdi2);
diff --git a/arch/microblaze/lib/divsi3.S b/arch/microblaze/lib/divsi3.S
new file mode 100644
index 000000000..919fb69f8
--- /dev/null
+++ b/arch/microblaze/lib/divsi3.S
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
+/*
+* Divide operation for 32 bit integers.
+*	Input :	Dividend in Reg r5
+*		Divisor in Reg r6
+*	Output: Result in Reg r3
+*/
+	.text
+	.globl	__divsi3
+	.type __divsi3, @function
+	.ent __divsi3
+__divsi3:
+	.frame	r1, 0, r15
+
+	addik	r1, r1, -16
+	swi	r28, r1, 0
+	swi	r29, r1, 4
+	swi	r30, r1, 8
+	swi	r31, r1, 12
+
+	beqi	r6, div_by_zero /* div_by_zero - division error */
+	beqi	r5, result_is_zero /* result is zero */
+	bgeid	r5, r5_pos
+	xor	r28, r5, r6 /* get the sign of the result */
+	rsubi	r5, r5, 0 /* make r5 positive */
+r5_pos:
+	bgei	r6, r6_pos
+	rsubi	r6, r6, 0 /* make r6 positive */
+r6_pos:
+	addik	r30, r0, 0 /* clear mod */
+	addik	r3, r0, 0 /* clear div */
+	addik	r29, r0, 32 /* initialize the loop count */
+
+	/* first part try to find the first '1' in the r5 */
+div0:
+	blti	r5, div2 /* this traps r5 == 0x80000000 */
+div1:
+	add	r5, r5, r5 /* left shift logical r5 */
+	bgtid	r5, div1
+	addik	r29, r29, -1
+div2:
+	/* left shift logical r5 get the '1' into the carry */
+	add	r5, r5, r5
+	addc	r30, r30, r30 /* move that bit into the mod register */
+	rsub	r31, r6, r30 /* try to subtract (r30 a r6) */
+	blti	r31, mod_too_small
+	/* move the r31 to mod since the result was positive */
+	or	r30, r0, r31
+	addik	r3, r3, 1
+mod_too_small:
+	addik	r29, r29, -1
+	beqi	r29, loop_end
+	add	r3, r3, r3 /* shift in the '1' into div */
+	bri	div2 /* div2 */
+loop_end:
+	bgei	r28, return_here
+	brid	return_here
+	rsubi	r3, r3, 0 /* negate the result */
+div_by_zero:
+result_is_zero:
+	or	r3, r0, r0 /* set result to 0 */
+return_here:
+/* restore values of csrs and that of r3 and the divisor and the dividend */
+	lwi	r28, r1, 0
+	lwi	r29, r1, 4
+	lwi	r30, r1, 8
+	lwi	r31, r1, 12
+	rtsd	r15, 8
+	addik	r1, r1, 16
+
+.size __divsi3, . - __divsi3
+.end __divsi3
diff --git a/arch/microblaze/lib/fastcopy.S b/arch/microblaze/lib/fastcopy.S
new file mode 100644
index 000000000..fdc48bb06
--- /dev/null
+++ b/arch/microblaze/lib/fastcopy.S
@@ -0,0 +1,666 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2008 Jim Law - Iris LP  All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Jim Law <jlaw@irispower.com>
+ *
+ * intended to replace:
+ *	memcpy in memcpy.c and
+ *	memmove in memmove.c
+ * ... in arch/microblaze/lib
+ *
+ *
+ * assly_fastcopy.S
+ *
+ * Attempt at quicker memcpy and memmove for MicroBlaze
+ *	Input :	Operand1 in Reg r5 - destination address
+ *		Operand2 in Reg r6 - source address
+ *		Operand3 in Reg r7 - number of bytes to transfer
+ *	Output: Result in Reg r3 - starting destinaition address
+ *
+ *
+ * Explanation:
+ *	Perform (possibly unaligned) copy of a block of memory
+ *	between mem locations with size of xfer spec'd in bytes
+ */
+
+#include <linux/linkage.h>
+	.text
+	.globl	memcpy
+	.type  memcpy, @function
+	.ent	memcpy
+
+memcpy:
+fast_memcpy_ascending:
+	/* move d to return register as value of function */
+	addi	r3, r5, 0
+
+	addi	r4, r0, 4	/* n = 4 */
+	cmpu	r4, r4, r7	/* n = c - n  (unsigned) */
+	blti	r4, a_xfer_end	/* if n < 0, less than one word to transfer */
+
+	/* transfer first 0~3 bytes to get aligned dest address */
+	andi	r4, r5, 3		/* n = d & 3 */
+	/* if zero, destination already aligned */
+	beqi	r4, a_dalign_done
+	/* n = 4 - n (yields 3, 2, 1 transfers for 1, 2, 3 addr offset) */
+	rsubi	r4, r4, 4
+	rsub	r7, r4, r7		/* c = c - n adjust c */
+
+a_xfer_first_loop:
+	/* if no bytes left to transfer, transfer the bulk */
+	beqi	r4, a_dalign_done
+	lbui	r11, r6, 0		/* h = *s */
+	sbi	r11, r5, 0		/* *d = h */
+	addi	r6, r6, 1		/* s++ */
+	addi	r5, r5, 1		/* d++ */
+	brid	a_xfer_first_loop	/* loop */
+	addi	r4, r4, -1		/* n-- (IN DELAY SLOT) */
+
+a_dalign_done:
+	addi	r4, r0, 32		/* n = 32 */
+	cmpu	r4, r4, r7		/* n = c - n  (unsigned) */
+	/* if n < 0, less than one block to transfer */
+	blti	r4, a_block_done
+
+a_block_xfer:
+	andi	r4, r7, 0xffffffe0	/* n = c & ~31 */
+	rsub	r7, r4, r7		/* c = c - n */
+
+	andi	r9, r6, 3		/* t1 = s & 3 */
+	/* if temp != 0, unaligned transfers needed */
+	bnei	r9, a_block_unaligned
+
+a_block_aligned:
+	lwi	r9, r6, 0		/* t1 = *(s + 0) */
+	lwi	r10, r6, 4		/* t2 = *(s + 4) */
+	lwi	r11, r6, 8		/* t3 = *(s + 8) */
+	lwi	r12, r6, 12		/* t4 = *(s + 12) */
+	swi	r9, r5, 0		/* *(d + 0) = t1 */
+	swi	r10, r5, 4		/* *(d + 4) = t2 */
+	swi	r11, r5, 8		/* *(d + 8) = t3 */
+	swi	r12, r5, 12		/* *(d + 12) = t4 */
+	lwi	r9, r6, 16		/* t1 = *(s + 16) */
+	lwi	r10, r6, 20		/* t2 = *(s + 20) */
+	lwi	r11, r6, 24		/* t3 = *(s + 24) */
+	lwi	r12, r6, 28		/* t4 = *(s + 28) */
+	swi	r9, r5, 16		/* *(d + 16) = t1 */
+	swi	r10, r5, 20		/* *(d + 20) = t2 */
+	swi	r11, r5, 24		/* *(d + 24) = t3 */
+	swi	r12, r5, 28		/* *(d + 28) = t4 */
+	addi	r6, r6, 32		/* s = s + 32 */
+	addi	r4, r4, -32		/* n = n - 32 */
+	bneid	r4, a_block_aligned	/* while (n) loop */
+	addi	r5, r5, 32		/* d = d + 32 (IN DELAY SLOT) */
+	bri	a_block_done
+
+a_block_unaligned:
+	andi	r8, r6, 0xfffffffc	/* as = s & ~3 */
+	add	r6, r6, r4		/* s = s + n */
+	lwi	r11, r8, 0		/* h = *(as + 0) */
+
+	addi	r9, r9, -1
+	beqi	r9, a_block_u1		/* t1 was 1 => 1 byte offset */
+	addi	r9, r9, -1
+	beqi	r9, a_block_u2		/* t1 was 2 => 2 byte offset */
+
+a_block_u3:
+	bslli	r11, r11, 24	/* h = h << 24 */
+a_bu3_loop:
+	lwi	r12, r8, 4	/* v = *(as + 4) */
+	bsrli	r9, r12, 8	/* t1 = v >> 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 0	/* *(d + 0) = t1 */
+	bslli	r11, r12, 24	/* h = v << 24 */
+	lwi	r12, r8, 8	/* v = *(as + 8) */
+	bsrli	r9, r12, 8	/* t1 = v >> 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 4	/* *(d + 4) = t1 */
+	bslli	r11, r12, 24	/* h = v << 24 */
+	lwi	r12, r8, 12	/* v = *(as + 12) */
+	bsrli	r9, r12, 8	/* t1 = v >> 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 8	/* *(d + 8) = t1 */
+	bslli	r11, r12, 24	/* h = v << 24 */
+	lwi	r12, r8, 16	/* v = *(as + 16) */
+	bsrli	r9, r12, 8	/* t1 = v >> 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 12	/* *(d + 12) = t1 */
+	bslli	r11, r12, 24	/* h = v << 24 */
+	lwi	r12, r8, 20	/* v = *(as + 20) */
+	bsrli	r9, r12, 8	/* t1 = v >> 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 16	/* *(d + 16) = t1 */
+	bslli	r11, r12, 24	/* h = v << 24 */
+	lwi	r12, r8, 24	/* v = *(as + 24) */
+	bsrli	r9, r12, 8	/* t1 = v >> 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 20	/* *(d + 20) = t1 */
+	bslli	r11, r12, 24	/* h = v << 24 */
+	lwi	r12, r8, 28	/* v = *(as + 28) */
+	bsrli	r9, r12, 8	/* t1 = v >> 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 24	/* *(d + 24) = t1 */
+	bslli	r11, r12, 24	/* h = v << 24 */
+	lwi	r12, r8, 32	/* v = *(as + 32) */
+	bsrli	r9, r12, 8	/* t1 = v >> 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 28	/* *(d + 28) = t1 */
+	bslli	r11, r12, 24	/* h = v << 24 */
+	addi	r8, r8, 32	/* as = as + 32 */
+	addi	r4, r4, -32	/* n = n - 32 */
+	bneid	r4, a_bu3_loop	/* while (n) loop */
+	addi	r5, r5, 32	/* d = d + 32 (IN DELAY SLOT) */
+	bri	a_block_done
+
+a_block_u1:
+	bslli	r11, r11, 8	/* h = h << 8 */
+a_bu1_loop:
+	lwi	r12, r8, 4	/* v = *(as + 4) */
+	bsrli	r9, r12, 24	/* t1 = v >> 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 0	/* *(d + 0) = t1 */
+	bslli	r11, r12, 8	/* h = v << 8 */
+	lwi	r12, r8, 8	/* v = *(as + 8) */
+	bsrli	r9, r12, 24	/* t1 = v >> 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 4	/* *(d + 4) = t1 */
+	bslli	r11, r12, 8	/* h = v << 8 */
+	lwi	r12, r8, 12	/* v = *(as + 12) */
+	bsrli	r9, r12, 24	/* t1 = v >> 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 8	/* *(d + 8) = t1 */
+	bslli	r11, r12, 8	/* h = v << 8 */
+	lwi	r12, r8, 16	/* v = *(as + 16) */
+	bsrli	r9, r12, 24	/* t1 = v >> 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 12	/* *(d + 12) = t1 */
+	bslli	r11, r12, 8	/* h = v << 8 */
+	lwi	r12, r8, 20	/* v = *(as + 20) */
+	bsrli	r9, r12, 24	/* t1 = v >> 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 16	/* *(d + 16) = t1 */
+	bslli	r11, r12, 8	/* h = v << 8 */
+	lwi	r12, r8, 24	/* v = *(as + 24) */
+	bsrli	r9, r12, 24	/* t1 = v >> 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 20	/* *(d + 20) = t1 */
+	bslli	r11, r12, 8	/* h = v << 8 */
+	lwi	r12, r8, 28	/* v = *(as + 28) */
+	bsrli	r9, r12, 24	/* t1 = v >> 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 24	/* *(d + 24) = t1 */
+	bslli	r11, r12, 8	/* h = v << 8 */
+	lwi	r12, r8, 32	/* v = *(as + 32) */
+	bsrli	r9, r12, 24	/* t1 = v >> 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 28	/* *(d + 28) = t1 */
+	bslli	r11, r12, 8	/* h = v << 8 */
+	addi	r8, r8, 32	/* as = as + 32 */
+	addi	r4, r4, -32	/* n = n - 32 */
+	bneid	r4, a_bu1_loop	/* while (n) loop */
+	addi	r5, r5, 32	/* d = d + 32 (IN DELAY SLOT) */
+	bri	a_block_done
+
+a_block_u2:
+	bslli	r11, r11, 16	/* h = h << 16 */
+a_bu2_loop:
+	lwi	r12, r8, 4	/* v = *(as + 4) */
+	bsrli	r9, r12, 16	/* t1 = v >> 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 0	/* *(d + 0) = t1 */
+	bslli	r11, r12, 16	/* h = v << 16 */
+	lwi	r12, r8, 8	/* v = *(as + 8) */
+	bsrli	r9, r12, 16	/* t1 = v >> 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 4	/* *(d + 4) = t1 */
+	bslli	r11, r12, 16	/* h = v << 16 */
+	lwi	r12, r8, 12	/* v = *(as + 12) */
+	bsrli	r9, r12, 16	/* t1 = v >> 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 8	/* *(d + 8) = t1 */
+	bslli	r11, r12, 16	/* h = v << 16 */
+	lwi	r12, r8, 16	/* v = *(as + 16) */
+	bsrli	r9, r12, 16	/* t1 = v >> 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 12	/* *(d + 12) = t1 */
+	bslli	r11, r12, 16	/* h = v << 16 */
+	lwi	r12, r8, 20	/* v = *(as + 20) */
+	bsrli	r9, r12, 16	/* t1 = v >> 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 16	/* *(d + 16) = t1 */
+	bslli	r11, r12, 16	/* h = v << 16 */
+	lwi	r12, r8, 24	/* v = *(as + 24) */
+	bsrli	r9, r12, 16	/* t1 = v >> 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 20	/* *(d + 20) = t1 */
+	bslli	r11, r12, 16	/* h = v << 16 */
+	lwi	r12, r8, 28	/* v = *(as + 28) */
+	bsrli	r9, r12, 16	/* t1 = v >> 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 24	/* *(d + 24) = t1 */
+	bslli	r11, r12, 16	/* h = v << 16 */
+	lwi	r12, r8, 32	/* v = *(as + 32) */
+	bsrli	r9, r12, 16	/* t1 = v >> 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 28	/* *(d + 28) = t1 */
+	bslli	r11, r12, 16	/* h = v << 16 */
+	addi	r8, r8, 32	/* as = as + 32 */
+	addi	r4, r4, -32	/* n = n - 32 */
+	bneid	r4, a_bu2_loop	/* while (n) loop */
+	addi	r5, r5, 32	/* d = d + 32 (IN DELAY SLOT) */
+
+a_block_done:
+	addi	r4, r0, 4	/* n = 4 */
+	cmpu	r4, r4, r7	/* n = c - n  (unsigned) */
+	blti	r4, a_xfer_end	/* if n < 0, less than one word to transfer */
+
+a_word_xfer:
+	andi	r4, r7, 0xfffffffc	/* n = c & ~3 */
+	addi	r10, r0, 0		/* offset = 0 */
+
+	andi	r9, r6, 3		/* t1 = s & 3 */
+	/* if temp != 0, unaligned transfers needed */
+	bnei	r9, a_word_unaligned
+
+a_word_aligned:
+	lw	r9, r6, r10		/* t1 = *(s+offset) */
+	sw	r9, r5, r10		/* *(d+offset) = t1 */
+	addi	r4, r4,-4		/* n-- */
+	bneid	r4, a_word_aligned	/* loop */
+	addi	r10, r10, 4		/* offset++ (IN DELAY SLOT) */
+
+	bri	a_word_done
+
+a_word_unaligned:
+	andi	r8, r6, 0xfffffffc	/* as = s & ~3 */
+	lwi	r11, r8, 0		/* h = *(as + 0) */
+	addi	r8, r8, 4		/* as = as + 4 */
+
+	addi	r9, r9, -1
+	beqi	r9, a_word_u1		/* t1 was 1 => 1 byte offset */
+	addi	r9, r9, -1
+	beqi	r9, a_word_u2		/* t1 was 2 => 2 byte offset */
+
+a_word_u3:
+	bslli	r11, r11, 24	/* h = h << 24 */
+a_wu3_loop:
+	lw	r12, r8, r10	/* v = *(as + offset) */
+	bsrli	r9, r12, 8	/* t1 = v >> 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	sw	r9, r5, r10	/* *(d + offset) = t1 */
+	bslli	r11, r12, 24	/* h = v << 24 */
+	addi	r4, r4,-4	/* n = n - 4 */
+	bneid	r4, a_wu3_loop	/* while (n) loop */
+	addi	r10, r10, 4	/* offset = ofset + 4 (IN DELAY SLOT) */
+
+	bri	a_word_done
+
+a_word_u1:
+	bslli	r11, r11, 8	/* h = h << 8 */
+a_wu1_loop:
+	lw	r12, r8, r10	/* v = *(as + offset) */
+	bsrli	r9, r12, 24	/* t1 = v >> 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	sw	r9, r5, r10	/* *(d + offset) = t1 */
+	bslli	r11, r12, 8	/* h = v << 8 */
+	addi	r4, r4,-4	/* n = n - 4 */
+	bneid	r4, a_wu1_loop	/* while (n) loop */
+	addi	r10, r10, 4	/* offset = ofset + 4 (IN DELAY SLOT) */
+
+	bri	a_word_done
+
+a_word_u2:
+	bslli	r11, r11, 16	/* h = h << 16 */
+a_wu2_loop:
+	lw	r12, r8, r10	/* v = *(as + offset) */
+	bsrli	r9, r12, 16	/* t1 = v >> 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	sw	r9, r5, r10	/* *(d + offset) = t1 */
+	bslli	r11, r12, 16	/* h = v << 16 */
+	addi	r4, r4,-4	/* n = n - 4 */
+	bneid	r4, a_wu2_loop	/* while (n) loop */
+	addi	r10, r10, 4	/* offset = ofset + 4 (IN DELAY SLOT) */
+
+a_word_done:
+	add	r5, r5, r10	/* d = d + offset */
+	add	r6, r6, r10	/* s = s + offset */
+	rsub	r7, r10, r7	/* c = c - offset */
+
+a_xfer_end:
+a_xfer_end_loop:
+	beqi	r7, a_done		/* while (c) */
+	lbui	r9, r6, 0		/* t1 = *s */
+	addi	r6, r6, 1		/* s++ */
+	sbi	r9, r5, 0		/* *d = t1 */
+	addi	r7, r7, -1		/* c-- */
+	brid	a_xfer_end_loop		/* loop */
+	addi	r5, r5, 1		/* d++ (IN DELAY SLOT) */
+
+a_done:
+	rtsd	r15, 8
+	nop
+
+.size  memcpy, . - memcpy
+.end memcpy
+/*----------------------------------------------------------------------------*/
+	.globl	memmove
+	.type  memmove, @function
+	.ent	memmove
+
+memmove:
+	cmpu	r4, r5, r6	/* n = s - d */
+	bgei	r4,fast_memcpy_ascending
+
+fast_memcpy_descending:
+	/* move d to return register as value of function */
+	addi	r3, r5, 0
+
+	add	r5, r5, r7	/* d = d + c */
+	add	r6, r6, r7	/* s = s + c */
+
+	addi	r4, r0, 4	/* n = 4 */
+	cmpu	r4, r4, r7	/* n = c - n  (unsigned) */
+	blti	r4,d_xfer_end	/* if n < 0, less than one word to transfer */
+
+	/* transfer first 0~3 bytes to get aligned dest address */
+	andi	r4, r5, 3		/* n = d & 3 */
+	/* if zero, destination already aligned */
+	beqi	r4,d_dalign_done
+	rsub	r7, r4, r7		/* c = c - n adjust c */
+
+d_xfer_first_loop:
+	/* if no bytes left to transfer, transfer the bulk */
+	beqi	r4,d_dalign_done
+	addi	r6, r6, -1		/* s-- */
+	addi	r5, r5, -1		/* d-- */
+	lbui	r11, r6, 0		/* h = *s */
+	sbi	r11, r5, 0		/* *d = h */
+	brid	d_xfer_first_loop	/* loop */
+	addi	r4, r4, -1		/* n-- (IN DELAY SLOT) */
+
+d_dalign_done:
+	addi	r4, r0, 32	/* n = 32 */
+	cmpu	r4, r4, r7	/* n = c - n  (unsigned) */
+	/* if n < 0, less than one block to transfer */
+	blti	r4, d_block_done
+
+d_block_xfer:
+	andi	r4, r7, 0xffffffe0	/* n = c & ~31 */
+	rsub	r7, r4, r7		/* c = c - n */
+
+	andi	r9, r6, 3		/* t1 = s & 3 */
+	/* if temp != 0, unaligned transfers needed */
+	bnei	r9, d_block_unaligned
+
+d_block_aligned:
+	addi	r6, r6, -32		/* s = s - 32 */
+	addi	r5, r5, -32		/* d = d - 32 */
+	lwi	r9, r6, 28		/* t1 = *(s + 28) */
+	lwi	r10, r6, 24		/* t2 = *(s + 24) */
+	lwi	r11, r6, 20		/* t3 = *(s + 20) */
+	lwi	r12, r6, 16		/* t4 = *(s + 16) */
+	swi	r9, r5, 28		/* *(d + 28) = t1 */
+	swi	r10, r5, 24		/* *(d + 24) = t2 */
+	swi	r11, r5, 20		/* *(d + 20) = t3 */
+	swi	r12, r5, 16		/* *(d + 16) = t4 */
+	lwi	r9, r6, 12		/* t1 = *(s + 12) */
+	lwi	r10, r6, 8		/* t2 = *(s + 8) */
+	lwi	r11, r6, 4		/* t3 = *(s + 4) */
+	lwi	r12, r6, 0		/* t4 = *(s + 0) */
+	swi	r9, r5, 12		/* *(d + 12) = t1 */
+	swi	r10, r5, 8		/* *(d + 8) = t2 */
+	swi	r11, r5, 4		/* *(d + 4) = t3 */
+	addi	r4, r4, -32		/* n = n - 32 */
+	bneid	r4, d_block_aligned	/* while (n) loop */
+	swi	r12, r5, 0		/* *(d + 0) = t4 (IN DELAY SLOT) */
+	bri	d_block_done
+
+d_block_unaligned:
+	andi	r8, r6, 0xfffffffc	/* as = s & ~3 */
+	rsub	r6, r4, r6		/* s = s - n */
+	lwi	r11, r8, 0		/* h = *(as + 0) */
+
+	addi	r9, r9, -1
+	beqi	r9,d_block_u1		/* t1 was 1 => 1 byte offset */
+	addi	r9, r9, -1
+	beqi	r9,d_block_u2		/* t1 was 2 => 2 byte offset */
+
+d_block_u3:
+	bsrli	r11, r11, 8	/* h = h >> 8 */
+d_bu3_loop:
+	addi	r8, r8, -32	/* as = as - 32 */
+	addi	r5, r5, -32	/* d = d - 32 */
+	lwi	r12, r8, 28	/* v = *(as + 28) */
+	bslli	r9, r12, 24	/* t1 = v << 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 28	/* *(d + 28) = t1 */
+	bsrli	r11, r12, 8	/* h = v >> 8 */
+	lwi	r12, r8, 24	/* v = *(as + 24) */
+	bslli	r9, r12, 24	/* t1 = v << 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 24	/* *(d + 24) = t1 */
+	bsrli	r11, r12, 8	/* h = v >> 8 */
+	lwi	r12, r8, 20	/* v = *(as + 20) */
+	bslli	r9, r12, 24	/* t1 = v << 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 20	/* *(d + 20) = t1 */
+	bsrli	r11, r12, 8	/* h = v >> 8 */
+	lwi	r12, r8, 16	/* v = *(as + 16) */
+	bslli	r9, r12, 24	/* t1 = v << 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 16	/* *(d + 16) = t1 */
+	bsrli	r11, r12, 8	/* h = v >> 8 */
+	lwi	r12, r8, 12	/* v = *(as + 12) */
+	bslli	r9, r12, 24	/* t1 = v << 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 12	/* *(d + 112) = t1 */
+	bsrli	r11, r12, 8	/* h = v >> 8 */
+	lwi	r12, r8, 8	/* v = *(as + 8) */
+	bslli	r9, r12, 24	/* t1 = v << 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 8	/* *(d + 8) = t1 */
+	bsrli	r11, r12, 8	/* h = v >> 8 */
+	lwi	r12, r8, 4	/* v = *(as + 4) */
+	bslli	r9, r12, 24	/* t1 = v << 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 4	/* *(d + 4) = t1 */
+	bsrli	r11, r12, 8	/* h = v >> 8 */
+	lwi	r12, r8, 0	/* v = *(as + 0) */
+	bslli	r9, r12, 24	/* t1 = v << 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 0	/* *(d + 0) = t1 */
+	addi	r4, r4, -32	/* n = n - 32 */
+	bneid	r4, d_bu3_loop	/* while (n) loop */
+	bsrli	r11, r12, 8	/* h = v >> 8 (IN DELAY SLOT) */
+	bri	d_block_done
+
+d_block_u1:
+	bsrli	r11, r11, 24	/* h = h >> 24 */
+d_bu1_loop:
+	addi	r8, r8, -32	/* as = as - 32 */
+	addi	r5, r5, -32	/* d = d - 32 */
+	lwi	r12, r8, 28	/* v = *(as + 28) */
+	bslli	r9, r12, 8	/* t1 = v << 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 28	/* *(d + 28) = t1 */
+	bsrli	r11, r12, 24	/* h = v >> 24 */
+	lwi	r12, r8, 24	/* v = *(as + 24) */
+	bslli	r9, r12, 8	/* t1 = v << 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 24	/* *(d + 24) = t1 */
+	bsrli	r11, r12, 24	/* h = v >> 24 */
+	lwi	r12, r8, 20	/* v = *(as + 20) */
+	bslli	r9, r12, 8	/* t1 = v << 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 20	/* *(d + 20) = t1 */
+	bsrli	r11, r12, 24	/* h = v >> 24 */
+	lwi	r12, r8, 16	/* v = *(as + 16) */
+	bslli	r9, r12, 8	/* t1 = v << 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 16	/* *(d + 16) = t1 */
+	bsrli	r11, r12, 24	/* h = v >> 24 */
+	lwi	r12, r8, 12	/* v = *(as + 12) */
+	bslli	r9, r12, 8	/* t1 = v << 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 12	/* *(d + 112) = t1 */
+	bsrli	r11, r12, 24	/* h = v >> 24 */
+	lwi	r12, r8, 8	/* v = *(as + 8) */
+	bslli	r9, r12, 8	/* t1 = v << 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 8	/* *(d + 8) = t1 */
+	bsrli	r11, r12, 24	/* h = v >> 24 */
+	lwi	r12, r8, 4	/* v = *(as + 4) */
+	bslli	r9, r12, 8	/* t1 = v << 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 4	/* *(d + 4) = t1 */
+	bsrli	r11, r12, 24	/* h = v >> 24 */
+	lwi	r12, r8, 0	/* v = *(as + 0) */
+	bslli	r9, r12, 8	/* t1 = v << 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 0	/* *(d + 0) = t1 */
+	addi	r4, r4, -32	/* n = n - 32 */
+	bneid	r4, d_bu1_loop	/* while (n) loop */
+	bsrli	r11, r12, 24	/* h = v >> 24 (IN DELAY SLOT) */
+	bri	d_block_done
+
+d_block_u2:
+	bsrli	r11, r11, 16	/* h = h >> 16 */
+d_bu2_loop:
+	addi	r8, r8, -32	/* as = as - 32 */
+	addi	r5, r5, -32	/* d = d - 32 */
+	lwi	r12, r8, 28	/* v = *(as + 28) */
+	bslli	r9, r12, 16	/* t1 = v << 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 28	/* *(d + 28) = t1 */
+	bsrli	r11, r12, 16	/* h = v >> 16 */
+	lwi	r12, r8, 24	/* v = *(as + 24) */
+	bslli	r9, r12, 16	/* t1 = v << 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 24	/* *(d + 24) = t1 */
+	bsrli	r11, r12, 16	/* h = v >> 16 */
+	lwi	r12, r8, 20	/* v = *(as + 20) */
+	bslli	r9, r12, 16	/* t1 = v << 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 20	/* *(d + 20) = t1 */
+	bsrli	r11, r12, 16	/* h = v >> 16 */
+	lwi	r12, r8, 16	/* v = *(as + 16) */
+	bslli	r9, r12, 16	/* t1 = v << 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 16	/* *(d + 16) = t1 */
+	bsrli	r11, r12, 16	/* h = v >> 16 */
+	lwi	r12, r8, 12	/* v = *(as + 12) */
+	bslli	r9, r12, 16	/* t1 = v << 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 12	/* *(d + 112) = t1 */
+	bsrli	r11, r12, 16	/* h = v >> 16 */
+	lwi	r12, r8, 8	/* v = *(as + 8) */
+	bslli	r9, r12, 16	/* t1 = v << 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 8	/* *(d + 8) = t1 */
+	bsrli	r11, r12, 16	/* h = v >> 16 */
+	lwi	r12, r8, 4	/* v = *(as + 4) */
+	bslli	r9, r12, 16	/* t1 = v << 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 4	/* *(d + 4) = t1 */
+	bsrli	r11, r12, 16	/* h = v >> 16 */
+	lwi	r12, r8, 0	/* v = *(as + 0) */
+	bslli	r9, r12, 16	/* t1 = v << 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	swi	r9, r5, 0	/* *(d + 0) = t1 */
+	addi	r4, r4, -32	/* n = n - 32 */
+	bneid	r4, d_bu2_loop	/* while (n) loop */
+	bsrli	r11, r12, 16	/* h = v >> 16 (IN DELAY SLOT) */
+
+d_block_done:
+	addi	r4, r0, 4	/* n = 4 */
+	cmpu	r4, r4, r7	/* n = c - n  (unsigned) */
+	blti	r4,d_xfer_end	/* if n < 0, less than one word to transfer */
+
+d_word_xfer:
+	andi	r4, r7, 0xfffffffc	/* n = c & ~3 */
+	rsub	r5, r4, r5		/* d = d - n */
+	rsub	r6, r4, r6		/* s = s - n */
+	rsub	r7, r4, r7		/* c = c - n */
+
+	andi	r9, r6, 3		/* t1 = s & 3 */
+	/* if temp != 0, unaligned transfers needed */
+	bnei	r9, d_word_unaligned
+
+d_word_aligned:
+	addi	r4, r4,-4		/* n-- */
+	lw	r9, r6, r4		/* t1 = *(s+n) */
+	bneid	r4, d_word_aligned	/* loop */
+	sw	r9, r5, r4		/* *(d+n) = t1 (IN DELAY SLOT) */
+
+	bri	d_word_done
+
+d_word_unaligned:
+	andi	r8, r6, 0xfffffffc	/* as = s & ~3 */
+	lw	r11, r8, r4		/* h = *(as + n) */
+
+	addi	r9, r9, -1
+	beqi	r9,d_word_u1		/* t1 was 1 => 1 byte offset */
+	addi	r9, r9, -1
+	beqi	r9,d_word_u2		/* t1 was 2 => 2 byte offset */
+
+d_word_u3:
+	bsrli	r11, r11, 8	/* h = h >> 8 */
+d_wu3_loop:
+	addi	r4, r4,-4	/* n = n - 4 */
+	lw	r12, r8, r4	/* v = *(as + n) */
+	bslli	r9, r12, 24	/* t1 = v << 24 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	sw	r9, r5, r4	/* *(d + n) = t1 */
+	bneid	r4, d_wu3_loop	/* while (n) loop */
+	bsrli	r11, r12, 8	/* h = v >> 8 (IN DELAY SLOT) */
+
+	bri	d_word_done
+
+d_word_u1:
+	bsrli	r11, r11, 24	/* h = h >> 24 */
+d_wu1_loop:
+	addi	r4, r4,-4	/* n = n - 4 */
+	lw	r12, r8, r4	/* v = *(as + n) */
+	bslli	r9, r12, 8	/* t1 = v << 8 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	sw	r9, r5, r4	/* *(d + n) = t1 */
+	bneid	r4, d_wu1_loop	/* while (n) loop */
+	bsrli	r11, r12, 24	/* h = v >> 24 (IN DELAY SLOT) */
+
+	bri	d_word_done
+
+d_word_u2:
+	bsrli	r11, r11, 16	/* h = h >> 16 */
+d_wu2_loop:
+	addi	r4, r4,-4	/* n = n - 4 */
+	lw	r12, r8, r4	/* v = *(as + n) */
+	bslli	r9, r12, 16	/* t1 = v << 16 */
+	or	r9, r11, r9	/* t1 = h | t1 */
+	sw	r9, r5, r4	/* *(d + n) = t1 */
+	bneid	r4, d_wu2_loop	/* while (n) loop */
+	bsrli	r11, r12, 16	/* h = v >> 16 (IN DELAY SLOT) */
+
+d_word_done:
+
+d_xfer_end:
+d_xfer_end_loop:
+	beqi	r7, a_done		/* while (c) */
+	addi	r6, r6, -1		/* s-- */
+	lbui	r9, r6, 0		/* t1 = *s */
+	addi	r5, r5, -1		/* d-- */
+	sbi	r9, r5, 0		/* *d = t1 */
+	brid	d_xfer_end_loop		/* loop */
+	addi	r7, r7, -1		/* c-- (IN DELAY SLOT) */
+
+d_done:
+	rtsd	r15, 8
+	nop
+
+.size  memmove, . - memmove
+.end memmove
diff --git a/arch/microblaze/lib/libgcc.h b/arch/microblaze/lib/libgcc.h
new file mode 100644
index 000000000..a909366c2
--- /dev/null
+++ b/arch/microblaze/lib/libgcc.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_LIBGCC_H
+#define __ASM_LIBGCC_H
+
+#include <asm/byteorder.h>
+
+typedef int word_type __attribute__ ((mode (__word__)));
+
+#ifdef __BIG_ENDIAN
+struct DWstruct {
+	int high, low;
+};
+#elif defined(__LITTLE_ENDIAN)
+struct DWstruct {
+	int low, high;
+};
+#else
+#error I feel sick.
+#endif
+
+typedef union {
+	struct DWstruct s;
+	long long ll;
+} DWunion;
+
+extern long long __ashldi3(long long u, word_type b);
+extern long long __ashrdi3(long long u, word_type b);
+extern word_type __cmpdi2(long long a, long long b);
+extern long long __lshrdi3(long long u, word_type b);
+extern long long __muldi3(long long u, long long v);
+extern word_type __ucmpdi2(unsigned long long a, unsigned long long b);
+
+#endif /* __ASM_LIBGCC_H */
diff --git a/arch/microblaze/lib/lshrdi3.c b/arch/microblaze/lib/lshrdi3.c
new file mode 100644
index 000000000..00eb82682
--- /dev/null
+++ b/arch/microblaze/lib/lshrdi3.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+long long __lshrdi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		w.s.high = 0;
+		w.s.low = (unsigned int) uu.s.high >> -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+		w.s.high = (unsigned int) uu.s.high >> b;
+		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
new file mode 100644
index 000000000..9966dce55
--- /dev/null
+++ b/arch/microblaze/lib/memcpy.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memcpy on Microblaze
+ * This is generic C code to do efficient, alignment-aware memcpy.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccessfully, to contact the original
+ * author of this code (Michael Morrow, Intel).  Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+
+#include <linux/string.h>
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
+{
+	const char *src = v_src;
+	char *dst = v_dst;
+
+	/* The following code tries to optimize the copy by using unsigned
+	 * alignment. This will work fine if both source and destination are
+	 * aligned on the same boundary. However, if they are aligned on
+	 * different boundaries shifts will be necessary. This might result in
+	 * bad performance on MicroBlaze systems without a barrel shifter.
+	 */
+	const uint32_t *i_src;
+	uint32_t *i_dst;
+
+	if (likely(c >= 4)) {
+		unsigned  value, buf_hold;
+
+		/* Align the destination to a word boundary. */
+		/* This is done in an endian independent manner. */
+		switch ((unsigned long)dst & 3) {
+		case 1:
+			*dst++ = *src++;
+			--c;
+			fallthrough;
+		case 2:
+			*dst++ = *src++;
+			--c;
+			fallthrough;
+		case 3:
+			*dst++ = *src++;
+			--c;
+		}
+
+		i_dst = (void *)dst;
+
+		/* Choose a copy scheme based on the source */
+		/* alignment relative to destination. */
+		switch ((unsigned long)src & 3) {
+		case 0x0:	/* Both byte offsets are aligned */
+			i_src  = (const void *)src;
+
+			for (; c >= 4; c -= 4)
+				*i_dst++ = *i_src++;
+
+			src  = (const void *)i_src;
+			break;
+		case 0x1:	/* Unaligned - Off by 1 */
+			/* Word align the source */
+			i_src = (const void *) ((unsigned)src & ~3);
+#ifndef __MICROBLAZEEL__
+			/* Load the holding buffer */
+			buf_hold = *i_src++ << 8;
+
+			for (; c >= 4; c -= 4) {
+				value = *i_src++;
+				*i_dst++ = buf_hold | value >> 24;
+				buf_hold = value << 8;
+			}
+#else
+			/* Load the holding buffer */
+			buf_hold = (*i_src++ & 0xFFFFFF00) >> 8;
+
+			for (; c >= 4; c -= 4) {
+				value = *i_src++;
+				*i_dst++ = buf_hold | ((value & 0xFF) << 24);
+				buf_hold = (value & 0xFFFFFF00) >> 8;
+			}
+#endif
+			/* Realign the source */
+			src = (const void *)i_src;
+			src -= 3;
+			break;
+		case 0x2:	/* Unaligned - Off by 2 */
+			/* Word align the source */
+			i_src = (const void *) ((unsigned)src & ~3);
+#ifndef __MICROBLAZEEL__
+			/* Load the holding buffer */
+			buf_hold = *i_src++ << 16;
+
+			for (; c >= 4; c -= 4) {
+				value = *i_src++;
+				*i_dst++ = buf_hold | value >> 16;
+				buf_hold = value << 16;
+			}
+#else
+			/* Load the holding buffer */
+			buf_hold = (*i_src++ & 0xFFFF0000) >> 16;
+
+			for (; c >= 4; c -= 4) {
+				value = *i_src++;
+				*i_dst++ = buf_hold | ((value & 0xFFFF) << 16);
+				buf_hold = (value & 0xFFFF0000) >> 16;
+			}
+#endif
+			/* Realign the source */
+			src = (const void *)i_src;
+			src -= 2;
+			break;
+		case 0x3:	/* Unaligned - Off by 3 */
+			/* Word align the source */
+			i_src = (const void *) ((unsigned)src & ~3);
+#ifndef __MICROBLAZEEL__
+			/* Load the holding buffer */
+			buf_hold = *i_src++ << 24;
+
+			for (; c >= 4; c -= 4) {
+				value = *i_src++;
+				*i_dst++ = buf_hold | value >> 8;
+				buf_hold = value << 24;
+			}
+#else
+			/* Load the holding buffer */
+			buf_hold = (*i_src++ & 0xFF000000) >> 24;
+
+			for (; c >= 4; c -= 4) {
+				value = *i_src++;
+				*i_dst++ = buf_hold | ((value & 0xFFFFFF) << 8);
+				buf_hold = (value & 0xFF000000) >> 24;
+			}
+#endif
+			/* Realign the source */
+			src = (const void *)i_src;
+			src -= 1;
+			break;
+		}
+		dst = (void *)i_dst;
+	}
+
+	/* Finish off any remaining bytes */
+	/* simple fast copy, ... unless a cache boundary is crossed */
+	switch (c) {
+	case 3:
+		*dst++ = *src++;
+		fallthrough;
+	case 2:
+		*dst++ = *src++;
+		fallthrough;
+	case 1:
+		*dst++ = *src++;
+	}
+
+	return v_dst;
+}
+EXPORT_SYMBOL(memcpy);
+#endif /* CONFIG_OPT_LIB_FUNCTION */
diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
new file mode 100644
index 000000000..c1f08c484
--- /dev/null
+++ b/arch/microblaze/lib/memmove.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memcpy on Microblaze
+ * This is generic C code to do efficient, alignment-aware memmove.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccessfully, to contact the original
+ * author of this code (Michael Morrow, Intel).  Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/string.h>
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+void *memmove(void *v_dst, const void *v_src, __kernel_size_t c)
+{
+	const char *src = v_src;
+	char *dst = v_dst;
+	const uint32_t *i_src;
+	uint32_t *i_dst;
+
+	if (!c)
+		return v_dst;
+
+	/* Use memcpy when source is higher than dest */
+	if (v_dst <= v_src)
+		return memcpy(v_dst, v_src, c);
+
+	/* The following code tries to optimize the copy by using unsigned
+	 * alignment. This will work fine if both source and destination are
+	 * aligned on the same boundary. However, if they are aligned on
+	 * different boundaries shifts will be necessary. This might result in
+	 * bad performance on MicroBlaze systems without a barrel shifter.
+	 */
+	/* FIXME this part needs more test */
+	/* Do a descending copy - this is a bit trickier! */
+	dst += c;
+	src += c;
+
+	if (c >= 4) {
+		unsigned  value, buf_hold;
+
+		/* Align the destination to a word boundary. */
+		/* This is done in an endian independent manner. */
+
+		switch ((unsigned long)dst & 3) {
+		case 3:
+			*--dst = *--src;
+			--c;
+			fallthrough;
+		case 2:
+			*--dst = *--src;
+			--c;
+			fallthrough;
+		case 1:
+			*--dst = *--src;
+			--c;
+		}
+
+		i_dst = (void *)dst;
+		/* Choose a copy scheme based on the source */
+		/* alignment relative to destination. */
+		switch ((unsigned long)src & 3) {
+		case 0x0:	/* Both byte offsets are aligned */
+
+			i_src  = (const void *)src;
+
+			for (; c >= 4; c -= 4)
+				*--i_dst = *--i_src;
+
+			src  = (const void *)i_src;
+			break;
+		case 0x1:	/* Unaligned - Off by 1 */
+			/* Word align the source */
+			i_src = (const void *) (((unsigned)src + 4) & ~3);
+#ifndef __MICROBLAZEEL__
+			/* Load the holding buffer */
+			buf_hold = *--i_src >> 24;
+
+			for (; c >= 4; c -= 4) {
+				value = *--i_src;
+				*--i_dst = buf_hold << 8 | value;
+				buf_hold = value >> 24;
+			}
+#else
+			/* Load the holding buffer */
+			buf_hold = (*--i_src & 0xFF) << 24;
+
+			for (; c >= 4; c -= 4) {
+				value = *--i_src;
+				*--i_dst = buf_hold |
+						((value & 0xFFFFFF00) >> 8);
+				buf_hold = (value  & 0xFF) << 24;
+			}
+#endif
+			/* Realign the source */
+			src = (const void *)i_src;
+			src += 1;
+			break;
+		case 0x2:	/* Unaligned - Off by 2 */
+			/* Word align the source */
+			i_src = (const void *) (((unsigned)src + 4) & ~3);
+#ifndef __MICROBLAZEEL__
+			/* Load the holding buffer */
+			buf_hold = *--i_src >> 16;
+
+			for (; c >= 4; c -= 4) {
+				value = *--i_src;
+				*--i_dst = buf_hold << 16 | value;
+				buf_hold = value >> 16;
+			}
+#else
+			/* Load the holding buffer */
+			buf_hold = (*--i_src & 0xFFFF) << 16;
+
+			for (; c >= 4; c -= 4) {
+				value = *--i_src;
+				*--i_dst = buf_hold |
+						((value & 0xFFFF0000) >> 16);
+				buf_hold = (value & 0xFFFF) << 16;
+			}
+#endif
+			/* Realign the source */
+			src = (const void *)i_src;
+			src += 2;
+			break;
+		case 0x3:	/* Unaligned - Off by 3 */
+			/* Word align the source */
+			i_src = (const void *) (((unsigned)src + 4) & ~3);
+#ifndef __MICROBLAZEEL__
+			/* Load the holding buffer */
+			buf_hold = *--i_src >> 8;
+
+			for (; c >= 4; c -= 4) {
+				value = *--i_src;
+				*--i_dst = buf_hold << 24 | value;
+				buf_hold = value >> 8;
+			}
+#else
+			/* Load the holding buffer */
+			buf_hold = (*--i_src & 0xFFFFFF) << 8;
+
+			for (; c >= 4; c -= 4) {
+				value = *--i_src;
+				*--i_dst = buf_hold |
+						((value & 0xFF000000) >> 24);
+				buf_hold = (value & 0xFFFFFF) << 8;
+			}
+#endif
+			/* Realign the source */
+			src = (const void *)i_src;
+			src += 3;
+			break;
+		}
+		dst = (void *)i_dst;
+	}
+
+	/* simple fast copy, ... unless a cache boundary is crossed */
+	/* Finish off any remaining bytes */
+	switch (c) {
+	case 4:
+		*--dst = *--src;
+		fallthrough;
+	case 3:
+		*--dst = *--src;
+		fallthrough;
+	case 2:
+		*--dst = *--src;
+		fallthrough;
+	case 1:
+		*--dst = *--src;
+	}
+	return v_dst;
+}
+EXPORT_SYMBOL(memmove);
+#endif /* CONFIG_OPT_LIB_FUNCTION */
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
new file mode 100644
index 000000000..7c2352d56
--- /dev/null
+++ b/arch/microblaze/lib/memset.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memset on Microblaze
+ * This is generic C code to do efficient, alignment-aware memcpy.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccessfully, to contact the original
+ * author of this code (Michael Morrow, Intel).  Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/string.h>
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+void *memset(void *v_src, int c, __kernel_size_t n)
+{
+	char *src = v_src;
+	uint32_t *i_src;
+	uint32_t w32 = 0;
+
+	/* Truncate c to 8 bits */
+	c = (c & 0xFF);
+
+	if (unlikely(c)) {
+		/* Make a repeating word out of it */
+		w32 = c;
+		w32 |= w32 << 8;
+		w32 |= w32 << 16;
+	}
+
+	if (likely(n >= 4)) {
+		/* Align the destination to a word boundary */
+		/* This is done in an endian independent manner */
+		switch ((unsigned) src & 3) {
+		case 1:
+			*src++ = c;
+			--n;
+			fallthrough;
+		case 2:
+			*src++ = c;
+			--n;
+			fallthrough;
+		case 3:
+			*src++ = c;
+			--n;
+		}
+
+		i_src  = (void *)src;
+
+		/* Do as many full-word copies as we can */
+		for (; n >= 4; n -= 4)
+			*i_src++ = w32;
+
+		src  = (void *)i_src;
+	}
+
+	/* Simple, byte oriented memset or the rest of count. */
+	switch (n) {
+	case 3:
+		*src++ = c;
+		fallthrough;
+	case 2:
+		*src++ = c;
+		fallthrough;
+	case 1:
+		*src++ = c;
+		break;
+	default:
+		break;
+	}
+
+	return v_src;
+}
+EXPORT_SYMBOL(memset);
+#endif /* CONFIG_OPT_LIB_FUNCTION */
diff --git a/arch/microblaze/lib/modsi3.S b/arch/microblaze/lib/modsi3.S
new file mode 100644
index 000000000..64154865c
--- /dev/null
+++ b/arch/microblaze/lib/modsi3.S
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
+/*
+* modulo operation for 32 bit integers.
+*	Input :	op1 in Reg r5
+*		op2 in Reg r6
+*	Output: op1 mod op2 in Reg r3
+*/
+
+	.text
+	.globl	__modsi3
+	.type __modsi3,  @function
+	.ent __modsi3
+
+__modsi3:
+	.frame	r1, 0, r15
+
+	addik	r1, r1, -16
+	swi	r28, r1, 0
+	swi	r29, r1, 4
+	swi	r30, r1, 8
+	swi	r31, r1, 12
+
+	beqi	r6, div_by_zero /* div_by_zero division error */
+	beqi	r5, result_is_zero /* result is zero */
+	bgeid	r5, r5_pos
+	/* get the sign of the result [ depends only on the first arg] */
+	add	r28, r5, r0
+	rsubi	r5, r5, 0	 /* make r5 positive */
+r5_pos:
+	bgei	r6, r6_pos
+	rsubi	r6, r6, 0	 /* make r6 positive */
+r6_pos:
+	addik	r3, r0, 0 /* clear mod */
+	addik	r30, r0, 0 /* clear div */
+	addik	r29, r0, 32 /* initialize the loop count */
+/* first part try to find the first '1' in the r5 */
+div1:
+	add	r5, r5, r5 /* left shift logical r5 */
+	bgeid	r5, div1
+	addik	r29, r29, -1
+div2:
+	/* left shift logical r5 get the '1' into the carry */
+	add	r5, r5, r5
+	addc	r3, r3, r3 /* move that bit into the mod register */
+	rsub	r31, r6, r3 /* try to subtract (r30 a r6) */
+	blti	r31, mod_too_small
+	/* move the r31 to mod since the result was positive */
+	or	r3, r0, r31
+	addik	r30, r30, 1
+mod_too_small:
+	addik	r29, r29, -1
+	beqi	r29, loop_end
+	add	r30, r30, r30 /* shift in the '1' into div */
+	bri	div2 /* div2 */
+loop_end:
+	bgei	r28, return_here
+	brid	return_here
+	rsubi	r3, r3, 0 /* negate the result */
+div_by_zero:
+result_is_zero:
+	or	r3, r0, r0 /* set result to 0 [both mod as well as div are 0] */
+return_here:
+/* restore values of csrs and that of r3 and the divisor and the dividend */
+	lwi	r28, r1, 0
+	lwi	r29, r1, 4
+	lwi	r30, r1, 8
+	lwi	r31, r1, 12
+	rtsd	r15, 8
+	addik	r1, r1, 16
+
+.size __modsi3,  . - __modsi3
+.end __modsi3
diff --git a/arch/microblaze/lib/muldi3.c b/arch/microblaze/lib/muldi3.c
new file mode 100644
index 000000000..8e6bc17e2
--- /dev/null
+++ b/arch/microblaze/lib/muldi3.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+#define W_TYPE_SIZE 32
+
+#define __ll_B ((unsigned long) 1 << (W_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((unsigned long) (t) & (__ll_B - 1))
+#define __ll_highpart(t) ((unsigned long) (t) >> (W_TYPE_SIZE / 2))
+
+/* If we still don't have umul_ppmm, define it using plain C.  */
+#if !defined(umul_ppmm)
+#define umul_ppmm(w1, w0, u, v)						\
+	do {								\
+		unsigned long __x0, __x1, __x2, __x3;			\
+		unsigned short __ul, __vl, __uh, __vh;			\
+									\
+		__ul = __ll_lowpart(u);					\
+		__uh = __ll_highpart(u);				\
+		__vl = __ll_lowpart(v);					\
+		__vh = __ll_highpart(v);				\
+									\
+		__x0 = (unsigned long) __ul * __vl;			\
+		__x1 = (unsigned long) __ul * __vh;			\
+		__x2 = (unsigned long) __uh * __vl;			\
+		__x3 = (unsigned long) __uh * __vh;			\
+									\
+		__x1 += __ll_highpart(__x0); /* this can't give carry */\
+		__x1 += __x2; /* but this indeed can */			\
+		if (__x1 < __x2) /* did we get it? */			\
+		__x3 += __ll_B; /* yes, add it in the proper pos */	\
+									\
+		(w1) = __x3 + __ll_highpart(__x1);			\
+		(w0) = __ll_lowpart(__x1) * __ll_B + __ll_lowpart(__x0);\
+	} while (0)
+#endif
+
+#if !defined(__umulsidi3)
+#define __umulsidi3(u, v) ({				\
+	DWunion __w;					\
+	umul_ppmm(__w.s.high, __w.s.low, u, v);		\
+	__w.ll;						\
+	})
+#endif
+
+long long __muldi3(long long u, long long v)
+{
+	const DWunion uu = {.ll = u};
+	const DWunion vv = {.ll = v};
+	DWunion w = {.ll = __umulsidi3(uu.s.low, vv.s.low)};
+
+	w.s.high += ((unsigned long) uu.s.low * (unsigned long) vv.s.high
+		+ (unsigned long) uu.s.high * (unsigned long) vv.s.low);
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__muldi3);
diff --git a/arch/microblaze/lib/mulsi3.S b/arch/microblaze/lib/mulsi3.S
new file mode 100644
index 000000000..d6703a4d9
--- /dev/null
+++ b/arch/microblaze/lib/mulsi3.S
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
+/*
+ * Multiply operation for 32 bit integers.
+ *	Input :	Operand1 in Reg r5
+ *		Operand2 in Reg r6
+ *	Output: Result [op1 * op2] in Reg r3
+ */
+	.text
+	.globl	__mulsi3
+	.type __mulsi3,  @function
+	.ent __mulsi3
+
+__mulsi3:
+	.frame	r1, 0, r15
+	add	r3, r0, r0
+	beqi	r5, result_is_zero /* multiply by zero */
+	beqi	r6, result_is_zero /* multiply by zero */
+	bgeid	r5, r5_pos
+	xor	r4, r5, r6 /* get the sign of the result */
+	rsubi	r5, r5, 0 /* make r5 positive */
+r5_pos:
+	bgei	r6, r6_pos
+	rsubi	r6, r6, 0 /* make r6 positive */
+r6_pos:
+	bri	l1
+l2:
+	add	r5, r5, r5
+l1:
+	srl	r6, r6
+	addc	r7, r0, r0
+	beqi	r7, l2
+	bneid	r6, l2
+	add	r3, r3, r5
+	blti	r4, negateresult
+	rtsd	r15, 8
+	nop
+negateresult:
+	rtsd	r15, 8
+	rsub	r3, r3, r0
+result_is_zero:
+	rtsd	r15, 8
+	addi	r3, r0, 0
+
+.size __mulsi3,  . - __mulsi3
+.end __mulsi3
diff --git a/arch/microblaze/lib/uaccess_old.S b/arch/microblaze/lib/uaccess_old.S
new file mode 100644
index 000000000..dd5f3bfbc
--- /dev/null
+++ b/arch/microblaze/lib/uaccess_old.S
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ * Copyright (C) 2007 LynuxWorks, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+/* Loop unrolling for __copy_tofrom_user */
+#define COPY(offset)	\
+1:	lwi	r4 , r6, 0x0000 + offset;	\
+2:	lwi	r19, r6, 0x0004 + offset;	\
+3:	lwi	r20, r6, 0x0008 + offset;	\
+4:	lwi	r21, r6, 0x000C + offset;	\
+5:	lwi	r22, r6, 0x0010 + offset;	\
+6:	lwi	r23, r6, 0x0014 + offset;	\
+7:	lwi	r24, r6, 0x0018 + offset;	\
+8:	lwi	r25, r6, 0x001C + offset;	\
+9:	swi	r4 , r5, 0x0000 + offset;	\
+10:	swi	r19, r5, 0x0004 + offset;	\
+11:	swi	r20, r5, 0x0008 + offset;	\
+12:	swi	r21, r5, 0x000C + offset;	\
+13:	swi	r22, r5, 0x0010 + offset;	\
+14:	swi	r23, r5, 0x0014 + offset;	\
+15:	swi	r24, r5, 0x0018 + offset;	\
+16:	swi	r25, r5, 0x001C + offset;	\
+	.section __ex_table,"a";		\
+	.word	1b, 33f;			\
+	.word	2b, 33f;			\
+	.word	3b, 33f;			\
+	.word	4b, 33f;			\
+	.word	5b, 33f;			\
+	.word	6b, 33f;			\
+	.word	7b, 33f;			\
+	.word	8b, 33f;			\
+	.word	9b, 33f;			\
+	.word	10b, 33f;			\
+	.word	11b, 33f;			\
+	.word	12b, 33f;			\
+	.word	13b, 33f;			\
+	.word	14b, 33f;			\
+	.word	15b, 33f;			\
+	.word	16b, 33f;			\
+	.text
+
+#define COPY_80(offset)	\
+	COPY(0x00 + offset);\
+	COPY(0x20 + offset);\
+	COPY(0x40 + offset);\
+	COPY(0x60 + offset);
+
+/*
+ * int __copy_tofrom_user(char *to, char *from, int len)
+ * Return:
+ *   0 on success
+ *   number of not copied bytes on error
+ */
+	.text
+.globl __copy_tofrom_user;
+.type  __copy_tofrom_user, @function
+.align 4;
+__copy_tofrom_user:
+	/*
+	 * r5 - to
+	 * r6 - from
+	 * r7, r3 - count
+	 * r4 - tempval
+	 */
+	beqid	r7, 0f /* zero size is not likely */
+	or	r3, r5, r6 /* find if is any to/from unaligned */
+	or	r3, r3, r7 /* find if count is unaligned */
+	andi	r3, r3, 0x3 /* mask last 3 bits */
+	bneid	r3, bu1 /* if r3 is not zero then byte copying */
+	or	r3, r0, r0
+
+	rsubi	r3, r7, PAGE_SIZE /* detect PAGE_SIZE */
+	beqid	r3, page;
+	or	r3, r0, r0
+
+w1:	lw	r4, r6, r3 /* at least one 4 byte copy */
+w2:	sw	r4, r5, r3
+	addik	r7, r7, -4
+	bneid	r7, w1
+	addik	r3, r3, 4
+	addik	r3, r7, 0
+	rtsd	r15, 8
+	nop
+
+	.section	__ex_table,"a"
+	.word	w1, 0f;
+	.word	w2, 0f;
+	.text
+
+.align 4 /* Alignment is important to keep icache happy */
+page:	/* Create room on stack and save registers for storing values */
+	addik   r1, r1, -40
+	swi	r5, r1, 0
+	swi	r6, r1, 4
+	swi	r7, r1, 8
+	swi	r19, r1, 12
+	swi	r20, r1, 16
+	swi	r21, r1, 20
+	swi	r22, r1, 24
+	swi	r23, r1, 28
+	swi	r24, r1, 32
+	swi	r25, r1, 36
+loop:	/* r4, r19, r20, r21, r22, r23, r24, r25 are used for storing values */
+	/* Loop unrolling to get performance boost */
+	COPY_80(0x000);
+	COPY_80(0x080);
+	COPY_80(0x100);
+	COPY_80(0x180);
+	/* copy loop */
+	addik   r6, r6, 0x200
+	addik   r7, r7, -0x200
+	bneid   r7, loop
+	addik   r5, r5, 0x200
+
+	/* Restore register content */
+	lwi	r5, r1, 0
+	lwi	r6, r1, 4
+	lwi	r7, r1, 8
+	lwi	r19, r1, 12
+	lwi	r20, r1, 16
+	lwi	r21, r1, 20
+	lwi	r22, r1, 24
+	lwi	r23, r1, 28
+	lwi	r24, r1, 32
+	lwi	r25, r1, 36
+	addik   r1, r1, 40
+	/* return back */
+	addik	r3, r0, 0
+	rtsd	r15, 8
+	nop
+
+/* Fault case - return temp count */
+33:
+	addik	r3, r7, 0
+	/* Restore register content */
+	lwi	r5, r1, 0
+	lwi	r6, r1, 4
+	lwi	r7, r1, 8
+	lwi	r19, r1, 12
+	lwi	r20, r1, 16
+	lwi	r21, r1, 20
+	lwi	r22, r1, 24
+	lwi	r23, r1, 28
+	lwi	r24, r1, 32
+	lwi	r25, r1, 36
+	addik   r1, r1, 40
+	/* return back */
+	rtsd	r15, 8
+	nop
+
+.align 4 /* Alignment is important to keep icache happy */
+bu1:	lbu	r4,r6,r3
+bu2:	sb	r4,r5,r3
+	addik	r7,r7,-1
+	bneid	r7,bu1
+	addik	r3,r3,1		/* delay slot */
+0:
+	addik	r3,r7,0
+	rtsd	r15,8
+	nop
+	.size   __copy_tofrom_user, . - __copy_tofrom_user
+
+	.section	__ex_table,"a"
+	.word	bu1, 0b;
+	.word	bu2, 0b;
+	.text
diff --git a/arch/microblaze/lib/ucmpdi2.c b/arch/microblaze/lib/ucmpdi2.c
new file mode 100644
index 000000000..c60e068ff
--- /dev/null
+++ b/arch/microblaze/lib/ucmpdi2.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+
+#include "libgcc.h"
+
+word_type __ucmpdi2(unsigned long long a, unsigned long long b)
+{
+	const DWunion au = {.ll = a};
+	const DWunion bu = {.ll = b};
+
+	if ((unsigned int) au.s.high < (unsigned int) bu.s.high)
+		return 0;
+	else if ((unsigned int) au.s.high > (unsigned int) bu.s.high)
+		return 2;
+	if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+		return 0;
+	else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+		return 2;
+	return 1;
+}
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/microblaze/lib/udivsi3.S b/arch/microblaze/lib/udivsi3.S
new file mode 100644
index 000000000..acdc66723
--- /dev/null
+++ b/arch/microblaze/lib/udivsi3.S
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
+/*
+* Unsigned divide operation.
+*	Input :	Divisor in Reg r5
+*		Dividend in Reg r6
+*	Output: Result in Reg r3
+*/
+
+	.text
+	.globl	__udivsi3
+	.type __udivsi3, @function
+	.ent __udivsi3
+
+__udivsi3:
+
+	.frame	r1, 0, r15
+
+	addik	r1, r1, -12
+	swi	r29, r1, 0
+	swi	r30, r1, 4
+	swi	r31, r1, 8
+
+	beqi	r6, div_by_zero /* div_by_zero /* division error */
+	beqid	r5, result_is_zero /* result is zero */
+	addik	r30, r0, 0 /* clear mod */
+	addik	r29, r0, 32 /* initialize the loop count */
+
+/* check if r6 and r5 are equal - if yes, return 1 */
+	rsub	r18, r5, r6
+	beqid	r18, return_here
+	addik	r3, r0, 1
+
+/* check if (uns)r6 is greater than (uns)r5. in that case, just return 0 */
+	xor	r18, r5, r6
+	bgeid	r18, 16
+	add	r3, r0, r0 /* we would anyways clear r3 */
+	blti	r6, return_here /* r6[bit 31 = 1] hence is greater */
+	bri	checkr6
+	rsub	r18, r6, r5 /* microblazecmp */
+	blti	r18, return_here
+
+/* if r6 [bit 31] is set, then return result as 1 */
+checkr6:
+	bgti	r6, div0
+	brid	return_here
+	addik	r3, r0, 1
+
+/* first part try to find the first '1' in the r5 */
+div0:
+	blti	r5, div2
+div1:
+	add	r5, r5, r5 /* left shift logical r5 */
+	bgtid	r5, div1
+	addik	r29, r29, -1
+div2:
+/* left shift logical r5 get the '1' into the carry */
+	add	r5, r5, r5
+	addc	r30, r30, r30 /* move that bit into the mod register */
+	rsub	r31, r6, r30 /* try to subtract (r30 a r6) */
+	blti	r31, mod_too_small
+/* move the r31 to mod since the result was positive */
+	or	r30, r0, r31
+	addik	r3, r3, 1
+mod_too_small:
+	addik	r29, r29, -1
+	beqi	r29, loop_end
+	add	r3, r3, r3 /* shift in the '1' into div */
+	bri	div2 /* div2 */
+loop_end:
+	bri	return_here
+div_by_zero:
+result_is_zero:
+	or	r3, r0, r0 /* set result to 0 */
+return_here:
+/* restore values of csrs and that of r3 and the divisor and the dividend */
+	lwi	r29, r1, 0
+	lwi	r30, r1, 4
+	lwi	r31, r1, 8
+	rtsd	r15, 8
+	addik	r1, r1, 12
+
+.size __udivsi3, . - __udivsi3
+.end __udivsi3
diff --git a/arch/microblaze/lib/umodsi3.S b/arch/microblaze/lib/umodsi3.S
new file mode 100644
index 000000000..f4b814e88
--- /dev/null
+++ b/arch/microblaze/lib/umodsi3.S
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+
+/*
+ * Unsigned modulo operation for 32 bit integers.
+ *	Input :	op1 in Reg r5
+ *		op2 in Reg r6
+ *	Output: op1 mod op2 in Reg r3
+ */
+
+	.text
+	.globl	__umodsi3
+	.type __umodsi3, @function
+	.ent __umodsi3
+
+__umodsi3:
+	.frame	r1, 0, r15
+
+	addik	r1, r1, -12
+	swi	r29, r1, 0
+	swi	r30, r1, 4
+	swi	r31, r1, 8
+
+	beqi	r6, div_by_zero /* div_by_zero - division error */
+	beqid	r5, result_is_zero /* result is zero */
+	addik	r3, r0, 0 /* clear div */
+	addik	r30, r0, 0 /* clear mod */
+	addik	r29, r0, 32 /* initialize the loop count */
+
+/* check if r6 and r5 are equal /* if yes, return 0 */
+	rsub	r18, r5, r6
+	beqi	r18, return_here
+
+/* check if (uns)r6 is greater than (uns)r5. in that case, just return r5 */
+	xor	r18, r5, r6
+	bgeid	r18, 16
+	addik	r3, r5, 0
+	blti	r6, return_here
+	bri	$lcheckr6
+	rsub	r18, r5, r6 /* microblazecmp */
+	bgti	r18, return_here
+
+/* if r6 [bit 31] is set, then return result as r5-r6 */
+$lcheckr6:
+	bgtid	r6, div0
+	addik	r3, r0, 0
+	addik	r18, r0, 0x7fffffff
+	and	r5, r5, r18
+	and	r6, r6, r18
+	brid	return_here
+	rsub	r3, r6, r5
+/* first part: try to find the first '1' in the r5 */
+div0:
+	blti	r5, div2
+div1:
+	add	r5, r5, r5 /* left shift logical r5 */
+	bgeid	r5, div1
+	addik	r29, r29, -1
+div2:
+	/* left shift logical r5 get the '1' into the carry */
+	add	r5, r5, r5
+	addc	r3, r3, r3 /* move that bit into the mod register */
+	rsub	r31, r6, r3 /* try to subtract (r3 a r6) */
+	blti	r31, mod_too_small
+	/* move the r31 to mod since the result was positive */
+	or	r3, r0, r31
+	addik	r30, r30, 1
+mod_too_small:
+	addik	r29, r29, -1
+	beqi	r29, loop_end
+	add	r30, r30, r30 /* shift in the '1' into div */
+	bri	div2 /* div2 */
+loop_end:
+	bri	return_here
+div_by_zero:
+result_is_zero:
+	or	r3, r0, r0 /* set result to 0 */
+return_here:
+/* restore values of csrs and that of r3 and the divisor and the dividend */
+	lwi	r29, r1, 0
+	lwi	r30, r1, 4
+	lwi	r31, r1, 8
+	rtsd	r15, 8
+	addik	r1, r1, 12
+
+.size __umodsi3, . - __umodsi3
+.end __umodsi3