ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

5 files changed, 413 insertions, 0 deletions

diff --git a/arch/microblaze/boot/.gitignore b/arch/microblaze/boot/.gitignore
new file mode 100644
index 000000000..11a9e229f
--- /dev/null
+++ b/arch/microblaze/boot/.gitignore
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+linux.bin*
+simpleImage.*
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
new file mode 100644
index 000000000..2b42c370d
--- /dev/null
+++ b/arch/microblaze/boot/Makefile
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# arch/microblaze/boot/Makefile
+#
+
+targets := linux.bin linux.bin.gz linux.bin.ub simpleImage.*
+
+OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary
+
+$(obj)/linux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/linux.bin.ub: $(obj)/linux.bin FORCE
+	$(call if_changed,uimage)
+
+$(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
+	$(call if_changed,gzip)
+
+quiet_cmd_strip = STRIP   $< $@$2
+	cmd_strip = $(STRIP) -K microblaze_start -K _end -K __log_buf \
+				-K _fdt_start $< -o $@$2
+
+UIMAGE_LOADADDR = $(CONFIG_KERNEL_BASE_ADDR)
+
+$(obj)/simpleImage.$(DTB): vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/simpleImage.$(DTB).ub: $(obj)/simpleImage.$(DTB) FORCE
+	$(call if_changed,uimage)
+
+$(obj)/simpleImage.$(DTB).unstrip: vmlinux FORCE
+	$(call if_changed,copy)
+
+$(obj)/simpleImage.$(DTB).strip: vmlinux FORCE
+	$(call if_changed,strip)
diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile
new file mode 100644
index 000000000..b84e2cbb2
--- /dev/null
+++ b/arch/microblaze/boot/dts/Makefile
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+
+dtb-y := system.dtb
+
+ifneq ($(DTB),)
+obj-y += linked_dtb.o
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+# Generate system.dtb from $(DTB).dtb
+ifneq ($(DTB),system)
+$(obj)/system.dtb: $(obj)/$(DTB).dtb
+	$(call if_changed,copy)
+endif
+endif
+
+# Rule to build device tree blobs
+DTC_FLAGS := -p 1024
diff --git a/arch/microblaze/boot/dts/linked_dtb.S b/arch/microblaze/boot/dts/linked_dtb.S
new file mode 100644
index 000000000..23345af37
--- /dev/null
+++ b/arch/microblaze/boot/dts/linked_dtb.S
@@ -0,0 +1,2 @@
+.section __fdt_blob,"a"
+.incbin "arch/microblaze/boot/dts/system.dtb"
diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts
new file mode 100644
index 000000000..22252451e
--- /dev/null
+++ b/arch/microblaze/boot/dts/system.dts
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,microblaze";
+	model = "testing";
+	DDR2_SDRAM: memory@90000000 {
+		device_type = "memory";
+		reg = < 0x90000000 0x10000000 >;
+	} ;
+	aliases {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
+	chosen {
+		bootargs = "console=ttyUL0,115200 highres=on";
+		stdout-path = "/plb@0/serial@84000000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <0x1>;
+		#size-cells = <0>;
+		microblaze_0: cpu@0 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,microblaze-7.10.d";
+			d-cache-baseaddr = <0x90000000>;
+			d-cache-highaddr = <0x9fffffff>;
+			d-cache-line-size = <0x10>;
+			d-cache-size = <0x2000>;
+			device_type = "cpu";
+			i-cache-baseaddr = <0x90000000>;
+			i-cache-highaddr = <0x9fffffff>;
+			i-cache-line-size = <0x10>;
+			i-cache-size = <0x2000>;
+			model = "microblaze,7.10.d";
+			reg = <0>;
+			timebase-frequency = <125000000>;
+			xlnx,addr-tag-bits = <0xf>;
+			xlnx,allow-dcache-wr = <0x1>;
+			xlnx,allow-icache-wr = <0x1>;
+			xlnx,area-optimized = <0x0>;
+			xlnx,cache-byte-size = <0x2000>;
+			xlnx,d-lmb = <0x1>;
+			xlnx,d-opb = <0x0>;
+			xlnx,d-plb = <0x1>;
+			xlnx,data-size = <0x20>;
+			xlnx,dcache-addr-tag = <0xf>;
+			xlnx,dcache-always-used = <0x1>;
+			xlnx,dcache-byte-size = <0x2000>;
+			xlnx,dcache-line-len = <0x4>;
+			xlnx,dcache-use-fsl = <0x1>;
+			xlnx,debug-enabled = <0x1>;
+			xlnx,div-zero-exception = <0x1>;
+			xlnx,dopb-bus-exception = <0x0>;
+			xlnx,dynamic-bus-sizing = <0x1>;
+			xlnx,edge-is-positive = <0x1>;
+			xlnx,family = "virtex5";
+			xlnx,endianness = <0x1>;
+			xlnx,fpu-exception = <0x1>;
+			xlnx,fsl-data-size = <0x20>;
+			xlnx,fsl-exception = <0x0>;
+			xlnx,fsl-links = <0x0>;
+			xlnx,i-lmb = <0x1>;
+			xlnx,i-opb = <0x0>;
+			xlnx,i-plb = <0x1>;
+			xlnx,icache-always-used = <0x1>;
+			xlnx,icache-line-len = <0x4>;
+			xlnx,icache-use-fsl = <0x1>;
+			xlnx,ill-opcode-exception = <0x1>;
+			xlnx,instance = "microblaze_0";
+			xlnx,interconnect = <0x1>;
+			xlnx,interrupt-is-edge = <0x0>;
+			xlnx,iopb-bus-exception = <0x0>;
+			xlnx,mmu-dtlb-size = <0x4>;
+			xlnx,mmu-itlb-size = <0x2>;
+			xlnx,mmu-tlb-access = <0x3>;
+			xlnx,mmu-zones = <0x10>;
+			xlnx,number-of-pc-brk = <0x1>;
+			xlnx,number-of-rd-addr-brk = <0x0>;
+			xlnx,number-of-wr-addr-brk = <0x0>;
+			xlnx,opcode-0x0-illegal = <0x1>;
+			xlnx,pvr = <0x2>;
+			xlnx,pvr-user1 = <0x0>;
+			xlnx,pvr-user2 = <0x0>;
+			xlnx,reset-msr = <0x0>;
+			xlnx,sco = <0x0>;
+			xlnx,unaligned-exceptions = <0x1>;
+			xlnx,use-barrel = <0x1>;
+			xlnx,use-dcache = <0x1>;
+			xlnx,use-div = <0x1>;
+			xlnx,use-ext-brk = <0x1>;
+			xlnx,use-ext-nm-brk = <0x1>;
+			xlnx,use-extended-fsl-instr = <0x0>;
+			xlnx,use-fpu = <0x2>;
+			xlnx,use-hw-mul = <0x2>;
+			xlnx,use-icache = <0x1>;
+			xlnx,use-interrupt = <0x1>;
+			xlnx,use-mmu = <0x3>;
+			xlnx,use-msr-instr = <0x1>;
+			xlnx,use-pcmp-instr = <0x1>;
+		} ;
+	} ;
+	mb_plb: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
+		ranges ;
+		FLASH: flash@a0000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xa0000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x1f40>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x0>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x2af8>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ranges ;
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&PIM3>;
+				local-mac-address = [ 00 0a 35 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <0x1>;
+				xlnx,phy-type = <0x1>;
+				xlnx,phyaddr = <0x1>;
+				xlnx,rxcsum = <0x0>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0x0>;
+				xlnx,txcsum = <0x0>;
+				xlnx,txfifo = <0x1000>;
+			} ;
+		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x7735940>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x0>;
+			xlnx,sda-inertial-delay = <0x0>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0x8>;
+			xlnx,interrupt-present = <0x1>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		} ;
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&LEDs_8Bit 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&LEDs_8Bit 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&LEDs_8Bit 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&LEDs_8Bit 7 1>;
+			};
+		} ;
+
+		gpio-restart {
+			compatible = "gpio-restart";
+			/*
+			 * FIXME: is this active low or active high?
+			 * the current flag (1) indicates active low.
+			 * delay measures are templates, should be adjusted
+			 * to datasheet or trial-and-error with real hardware.
+			 */
+			gpios = <&LEDs_8Bit 2 1>;
+			active-delay = <100>;
+			inactive-delay = <10>;
+			wait-delay = <100>;
+		};
+
+		RS232_Uart_1: serial@84000000 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,xps-uartlite-1.00.a";
+			current-speed = <115200>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 0 >;
+			port-number = <0>;
+			reg = < 0x84000000 0x10000 >;
+			xlnx,baudrate = <0x1c200>;
+			xlnx,data-bits = <0x8>;
+			xlnx,family = "virtex5";
+			xlnx,odd-parity = <0x0>;
+			xlnx,use-parity = <0x0>;
+		} ;
+		debug_module: debug@84400000 {
+			compatible = "xlnx,mdm-1.00.d";
+			reg = < 0x84400000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,interconnect = <0x1>;
+			xlnx,jtag-chain = <0x2>;
+			xlnx,mb-dbg-ports = <0x1>;
+			xlnx,uart-width = <0x8>;
+			xlnx,use-uart = <0x1>;
+			xlnx,write-fsl-ports = <0x0>;
+		} ;
+		mpmc@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,mpmc-4.02.a";
+			ranges ;
+			PIM3: sdma@84600180 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 2 2 1 2 >;
+				reg = < 0x84600180 0x80 >;
+			} ;
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <0x2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,kind-of-intr = <0x100>;
+			xlnx,num-intr-inputs = <0x9>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,one-timer-only = <0x0>;
+		} ;
+	} ;
+}  ;