Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 218 insertions, 0 deletions

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
new file mode 100644
index 000000000..484ebb3ba
--- /dev/null
+++ b/arch/microblaze/Kconfig
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MICROBLAZE
+	def_bool y
+	select ARCH_32BIT_OFF_T
+	select ARCH_NO_SWAP
+	select ARCH_HAS_DMA_PREP_COHERENT
+	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select BUILDTIME_TABLE_SORT
+	select TIMER_OF
+	select CLONE_BACKWARDS3
+	select COMMON_CLK
+	select DMA_DIRECT_REMAP
+	select GENERIC_ATOMIC64
+	select GENERIC_CPU_DEVICES
+	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
+	select GENERIC_SCHED_CLOCK
+	select HAS_IOPORT if PCI
+	select HAVE_ARCH_HASH
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_SECCOMP
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_CONTIGUOUS
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER
+	select HAVE_PAGE_SIZE_4KB
+	select HAVE_PCI
+	select IRQ_DOMAIN
+	select XILINX_INTC
+	select MODULES_USE_ELF_RELA
+	select OF
+	select OF_EARLY_FLATTREE
+	select PCI_DOMAINS_GENERIC if PCI
+	select PCI_SYSCALL if PCI
+	select CPU_NO_EFFICIENT_FFS
+	select MMU_GATHER_NO_RANGE
+	select SPARSE_IRQ
+	select ZONE_DMA
+	select TRACE_IRQFLAGS_SUPPORT
+	select GENERIC_IRQ_MULTI_HANDLER
+
+# Endianness selection
+choice
+	prompt "Endianness selection"
+	default CPU_LITTLE_ENDIAN
+	help
+	  microblaze architectures can be configured for either little or
+	  big endian formats. Be sure to select the appropriate mode.
+
+config CPU_BIG_ENDIAN
+	bool "Big endian"
+
+config CPU_LITTLE_ENDIAN
+	bool "Little endian"
+
+endchoice
+
+config ARCH_HAS_ILOG2_U32
+	def_bool n
+
+config ARCH_HAS_ILOG2_U64
+	def_bool n
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config GENERIC_CSUM
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+source "arch/microblaze/Kconfig.platform"
+
+menu "Processor type and features"
+
+source "kernel/Kconfig.hz"
+
+config MMU
+	def_bool y
+
+comment "Boot options"
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+
+config CMDLINE
+	string "Default kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyUL0,115200"
+	help
+	  On some architectures there is currently no way for the boot loader
+	  to pass arguments to the kernel. For these architectures, you should
+	  supply some command-line options at build time by entering them
+	  here.
+
+config CMDLINE_FORCE
+	bool "Force default kernel command string"
+	depends on CMDLINE_BOOL
+	default n
+	help
+	  Set this to have arguments from the default kernel command string
+	  override those passed by the boot loader.
+
+endmenu
+
+menu "Kernel features"
+
+config NR_CPUS
+	int
+	default "1"
+
+config ADVANCED_OPTIONS
+	bool "Prompt for advanced kernel configuration options"
+	help
+	  This option will enable prompting for a variety of advanced kernel
+	  configuration options.  These options can cause the kernel to not
+	  work if they are set incorrectly, but can be used to optimize certain
+	  aspects of kernel memory management.
+
+	  Unless you know what you are doing, say N here.
+
+comment "Default settings for advanced configuration options are used"
+	depends on !ADVANCED_OPTIONS
+
+config HIGHMEM
+	bool "High memory support"
+	select KMAP_LOCAL
+	help
+	  The address space of Microblaze processors is only 4 Gigabytes large
+	  and it has to accommodate user address space, kernel address
+	  space as well as some memory mapped IO. That means that, if you
+	  have a large amount of physical memory and/or IO, not all of the
+	  memory can be "permanently mapped" by the kernel. The physical
+	  memory that is not permanently mapped is called "high memory".
+
+	  If unsure, say n.
+
+config LOWMEM_SIZE_BOOL
+	bool "Set maximum low memory"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the maximum amount of memory which
+	  will be used as "low memory", that is, memory which the kernel can
+	  access directly, without having to set up a kernel virtual mapping.
+	  This can be useful in optimizing the layout of kernel virtual
+	  memory.
+
+	  Say N here unless you know what you are doing.
+
+config LOWMEM_SIZE
+	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
+	default "0x30000000"
+
+config MANUAL_RESET_VECTOR
+	hex "Microblaze reset vector address setup"
+	default "0x0"
+	help
+	  Set this option to have the kernel override the CPU Reset vector.
+	  If zero, no change will be made to the MicroBlaze reset vector at
+	  address 0x0.
+	  If non-zero, a jump instruction to this address, will be written
+	  to the reset vector at address 0x0.
+	  If you are unsure, set it to default value 0x0.
+
+config KERNEL_START_BOOL
+	bool "Set custom kernel base address"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the kernel virtual address at which
+	  the kernel will map low memory (the kernel image will be linked at
+	  this address).  This can be useful in optimizing the virtual memory
+	  layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config KERNEL_START
+	hex "Virtual address of kernel base" if KERNEL_START_BOOL
+	default "0xc0000000"
+
+config TASK_SIZE_BOOL
+	bool "Set custom user task size"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option allows you to set the amount of virtual address space
+	  allocated to user tasks.  This can be useful in optimizing the
+	  virtual memory layout of the system.
+
+	  Say N here unless you know what you are doing.
+
+config TASK_SIZE
+	hex "Size of user task space" if TASK_SIZE_BOOL
+	default "0x80000000"
+
+config MB_MANAGER
+	bool "Support for Microblaze Manager"
+	depends on ADVANCED_OPTIONS
+	help
+	  This option enables API for configuring the MicroBlaze manager
+	  control register, which is consumed by the break handler to
+	  block the break.
+
+	  Say N here unless you know what you are doing.
+
+endmenu