Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 268 insertions, 0 deletions

diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
new file mode 100644
index 000000000..5cbaf6e94
--- /dev/null
+++ b/arch/m68k/mac/macints.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	Macintosh interrupts
+ *
+ * General design:
+ * In contrary to the Amiga and Atari platforms, the Mac hardware seems to
+ * exclusively use the autovector interrupts (the 'generic level0-level7'
+ * interrupts with exception vectors 0x19-0x1f). The following interrupt levels
+ * are used:
+ *	1	- VIA1
+ *		  - slot 0: one second interrupt (CA2)
+ *		  - slot 1: VBlank (CA1)
+ *		  - slot 2: ADB data ready (SR full)
+ *		  - slot 3: ADB data  (CB2)
+ *		  - slot 4: ADB clock (CB1)
+ *		  - slot 5: timer 2
+ *		  - slot 6: timer 1
+ *		  - slot 7: status of IRQ; signals 'any enabled int.'
+ *
+ *	2	- VIA2 or RBV
+ *		  - slot 0: SCSI DRQ (CA2)
+ *		  - slot 1: NUBUS IRQ (CA1) need to read port A to find which
+ *		  - slot 2: /EXP IRQ (only on IIci)
+ *		  - slot 3: SCSI IRQ (CB2)
+ *		  - slot 4: ASC IRQ (CB1)
+ *		  - slot 5: timer 2 (not on IIci)
+ *		  - slot 6: timer 1 (not on IIci)
+ *		  - slot 7: status of IRQ; signals 'any enabled int.'
+ *
+ * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes:
+ *
+ *	3	- unused (?)
+ *
+ *	4	- SCC
+ *
+ *	5	- unused (?)
+ *		  [serial errors or special conditions seem to raise level 6
+ *		  interrupts on some models (LC4xx?)]
+ *
+ *	6	- off switch (?)
+ *
+ * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support
+ * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and
+ * sound out to their own autovector IRQs and gives VIA1 a higher priority:
+ *
+ *	1	- unused (?)
+ *
+ *	3	- on-board SONIC
+ *
+ *	5	- Apple Sound Chip (ASC)
+ *
+ *	6	- VIA1
+ *
+ * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to
+ * the Quadra (A/UX) mapping:
+ *
+ *	1	- ISM IOP (ADB)
+ *
+ *	2	- SCSI
+ *
+ *	3	- NuBus
+ *
+ *	4	- SCC IOP
+ *
+ *	6	- VIA1
+ *
+ * For PSC Macintoshes (660AV, 840AV):
+ *
+ *	3	- PSC level 3
+ *		  - slot 0: MACE
+ *
+ *	4	- PSC level 4
+ *		  - slot 1: SCC channel A interrupt
+ *		  - slot 2: SCC channel B interrupt
+ *		  - slot 3: MACE DMA
+ *
+ *	5	- PSC level 5
+ *
+ *	6	- PSC level 6
+ *
+ * Finally we have good 'ole level 7, the non-maskable interrupt:
+ *
+ *	7	- NMI (programmer's switch on the back of some Macs)
+ *		  Also RAM parity error on models which support it (IIc, IIfx?)
+ *
+ * The current interrupt logic looks something like this:
+ *
+ * - We install dispatchers for the autovector interrupts (1-7). These
+ *   dispatchers are responsible for querying the hardware (the
+ *   VIA/RBV/OSS/PSC chips) to determine the actual interrupt source. Using
+ *   this information a machspec interrupt number is generated by placing the
+ *   index of the interrupt hardware into the low three bits and the original
+ *   autovector interrupt number in the upper 5 bits. The handlers for the
+ *   resulting machspec interrupt are then called.
+ *
+ * - Nubus is a special case because its interrupts are hidden behind two
+ *   layers of hardware. Nubus interrupts come in as index 1 on VIA #2,
+ *   which translates to IRQ number 17. In this spot we install _another_
+ *   dispatcher. This dispatcher finds the interrupting slot number (9-F) and
+ *   then forms a new machspec interrupt number as above with the slot number
+ *   minus 9 in the low three bits and the pseudo-level 7 in the upper five
+ *   bits.  The handlers for this new machspec interrupt number are then
+ *   called. This puts Nubus interrupts into the range 56-62.
+ *
+ * - The Baboon interrupts (used on some PowerBooks) are an even more special
+ *   case. They're hidden behind the Nubus slot $C interrupt thus adding a
+ *   third layer of indirection. Why oh why did the Apple engineers do that?
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <asm/irq.h>
+#include <asm/macintosh.h>
+#include <asm/macints.h>
+#include <asm/mac_via.h>
+#include <asm/mac_psc.h>
+#include <asm/mac_oss.h>
+#include <asm/mac_iop.h>
+#include <asm/mac_baboon.h>
+#include <asm/hwtest.h>
+#include <asm/irq_regs.h>
+#include <asm/processor.h>
+
+static unsigned int mac_irq_startup(struct irq_data *);
+static void mac_irq_shutdown(struct irq_data *);
+
+static struct irq_chip mac_irq_chip = {
+	.name		= "mac",
+	.irq_enable	= mac_irq_enable,
+	.irq_disable	= mac_irq_disable,
+	.irq_startup	= mac_irq_startup,
+	.irq_shutdown	= mac_irq_shutdown,
+};
+
+static irqreturn_t mac_nmi_handler(int irq, void *dev_id)
+{
+	static volatile int in_nmi;
+
+	if (in_nmi)
+		return IRQ_HANDLED;
+	in_nmi = 1;
+
+	pr_info("Non-Maskable Interrupt\n");
+	show_registers(get_irq_regs());
+
+	in_nmi = 0;
+	return IRQ_HANDLED;
+}
+
+void __init mac_init_IRQ(void)
+{
+	m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER,
+				  NUM_MAC_SOURCES - IRQ_USER);
+
+	/*
+	 * Now register the handlers for the master IRQ handlers
+	 * at levels 1-7. Most of the work is done elsewhere.
+	 */
+
+	if (oss_present)
+		oss_register_interrupts();
+	else
+		via_register_interrupts();
+	if (psc)
+		psc_register_interrupts();
+	if (baboon_present)
+		baboon_register_interrupts();
+	iop_register_interrupts();
+	if (request_irq(IRQ_AUTO_7, mac_nmi_handler, 0, "NMI",
+			mac_nmi_handler))
+		pr_err("Couldn't register NMI\n");
+}
+
+/*
+ *  mac_irq_enable - enable an interrupt source
+ * mac_irq_disable - disable an interrupt source
+ *
+ * These routines are just dispatchers to the VIA/OSS/PSC routines.
+ */
+
+void mac_irq_enable(struct irq_data *data)
+{
+	int irq = data->irq;
+	int irq_src = IRQ_SRC(irq);
+
+	switch(irq_src) {
+	case 1:
+	case 2:
+	case 7:
+		if (oss_present)
+			oss_irq_enable(irq);
+		else
+			via_irq_enable(irq);
+		break;
+	case 3:
+	case 4:
+	case 5:
+	case 6:
+		if (psc)
+			psc_irq_enable(irq);
+		else if (oss_present)
+			oss_irq_enable(irq);
+		break;
+	case 8:
+		if (baboon_present)
+			baboon_irq_enable(irq);
+		break;
+	}
+}
+
+void mac_irq_disable(struct irq_data *data)
+{
+	int irq = data->irq;
+	int irq_src = IRQ_SRC(irq);
+
+	switch(irq_src) {
+	case 1:
+	case 2:
+	case 7:
+		if (oss_present)
+			oss_irq_disable(irq);
+		else
+			via_irq_disable(irq);
+		break;
+	case 3:
+	case 4:
+	case 5:
+	case 6:
+		if (psc)
+			psc_irq_disable(irq);
+		else if (oss_present)
+			oss_irq_disable(irq);
+		break;
+	case 8:
+		if (baboon_present)
+			baboon_irq_disable(irq);
+		break;
+	}
+}
+
+static unsigned int mac_irq_startup(struct irq_data *data)
+{
+	int irq = data->irq;
+
+	if (IRQ_SRC(irq) == 7 && !oss_present)
+		via_nubus_irq_startup(irq);
+	else
+		mac_irq_enable(data);
+
+	return 0;
+}
+
+static void mac_irq_shutdown(struct irq_data *data)
+{
+	int irq = data->irq;
+
+	if (IRQ_SRC(irq) == 7 && !oss_present)
+		via_nubus_irq_shutdown(irq);
+	else
+		mac_irq_disable(data);
+}