Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 134 insertions, 0 deletions

diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
new file mode 100644
index 000000000..0abcf994c
--- /dev/null
+++ b/arch/m68k/Makefile
@@ -0,0 +1,134 @@
+#
+# m68k/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Hamish Macdonald
+# Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com>
+#
+
+KBUILD_DEFCONFIG := multi_defconfig
+
+ifdef cross_compiling
+    ifeq ($(CROSS_COMPILE),)
+		CROSS_COMPILE := $(call cc-cross-prefix, \
+			m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
+    endif
+endif
+
+#
+#	Enable processor type. Ordering of these is important - we want to
+#	use the minimum processor type of the range we support. The logic
+#	for 680x0 will only allow use of the -m68060 or -m68040 if no other
+#	680x0 type is specified - and no option is specified for 68030 or
+#	68020. The other m68k/ColdFire types always specify some type of
+#	compiler cpu type flag.
+#
+ifndef CONFIG_M68040
+cpuflags-$(CONFIG_M68060)	= -m68060
+endif
+ifndef CONFIG_M68060
+cpuflags-$(CONFIG_M68040)	= -m68040
+endif
+cpuflags-$(CONFIG_M68030)	=
+cpuflags-$(CONFIG_M68020)	=
+cpuflags-$(CONFIG_M68000)	= -m68000
+cpuflags-$(CONFIG_M5441x)	= $(call cc-option,-mcpu=54455,-mcfv4e)
+cpuflags-$(CONFIG_M54xx)	= $(call cc-option,-mcpu=5475,-m5200)
+cpuflags-$(CONFIG_M5407)	= $(call cc-option,-mcpu=5407,-m5200)
+cpuflags-$(CONFIG_M532x)	= $(call cc-option,-mcpu=532x,-m5307)
+cpuflags-$(CONFIG_M537x)	= $(call cc-option,-mcpu=537x,-m5307)
+cpuflags-$(CONFIG_M5307)	= $(call cc-option,-mcpu=5307,-m5200)
+cpuflags-$(CONFIG_M528x)	= $(call cc-option,-mcpu=528x,-m5307)
+cpuflags-$(CONFIG_M5275)	= $(call cc-option,-mcpu=5275,-m5307)
+cpuflags-$(CONFIG_M5272)	= $(call cc-option,-mcpu=5272,-m5307)
+cpuflags-$(CONFIG_M5271)	= $(call cc-option,-mcpu=5271,-m5307)
+cpuflags-$(CONFIG_M523x)	= $(call cc-option,-mcpu=523x,-m5307)
+cpuflags-$(CONFIG_M525x)	= $(call cc-option,-mcpu=5253,-m5200)
+cpuflags-$(CONFIG_M5249)	= $(call cc-option,-mcpu=5249,-m5200)
+cpuflags-$(CONFIG_M520x)	= $(call cc-option,-mcpu=5208,-m5200)
+cpuflags-$(CONFIG_M5206e)	= $(call cc-option,-mcpu=5206e,-m5200)
+cpuflags-$(CONFIG_M5206)	= $(call cc-option,-mcpu=5206,-m5200)
+
+# Evaluate tune cc-option calls now
+cpuflags-y := $(cpuflags-y)
+
+KBUILD_AFLAGS += $(cpuflags-y)
+KBUILD_CFLAGS += $(cpuflags-y)
+
+KBUILD_CFLAGS += -pipe -ffreestanding
+
+ifdef CONFIG_MMU
+KBUILD_CFLAGS += -ffixed-a2
+else
+# we can use a m68k-linux-gcc toolchain with these in place
+KBUILD_CPPFLAGS += -DUTS_SYSNAME=\"uClinux\"
+KBUILD_CPPFLAGS += -D__uClinux__
+endif
+
+KBUILD_LDFLAGS := -m m68kelf
+
+ifdef CONFIG_SUN3
+LDFLAGS_vmlinux = -N
+endif
+
+CHECKFLAGS += -D__mc68000__
+
+
+ifdef CONFIG_KGDB
+# If configured for kgdb support, include debugging infos and keep the
+# frame pointer
+KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
+endif
+
+libs-y				+= arch/m68k/lib/
+
+
+all:	zImage
+
+lilo:	vmlinux
+	if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
+	if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
+	cat vmlinux > $(INSTALL_PATH)/vmlinux
+	cp System.map $(INSTALL_PATH)/System.map
+	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
+
+zImage compressed: vmlinux.gz
+
+vmlinux.gz: vmlinux
+
+ifndef CONFIG_KGDB
+	cp vmlinux vmlinux.tmp
+	$(STRIP) vmlinux.tmp
+	$(KGZIP) -9c vmlinux.tmp >vmlinux.gz
+	rm vmlinux.tmp
+else
+	$(KGZIP) -9c vmlinux >vmlinux.gz
+endif
+
+bzImage: vmlinux.bz2
+
+vmlinux.bz2: vmlinux
+
+ifndef CONFIG_KGDB
+	cp vmlinux vmlinux.tmp
+	$(STRIP) vmlinux.tmp
+	$(KBZIP2) -1c vmlinux.tmp >vmlinux.bz2
+	rm vmlinux.tmp
+else
+	$(KBZIP2) -1c vmlinux >vmlinux.bz2
+endif
+
+CLEAN_FILES += vmlinux.gz vmlinux.bz2
+
+archheaders:
+	$(Q)$(MAKE) $(build)=arch/m68k/kernel/syscalls all
+
+install: KBUILD_IMAGE := vmlinux.gz
+install:
+	$(call cmd,install)