KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 134 insertions, 0 deletions

diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
new file mode 100644
index 000000000..0abcf994c
--- /dev/null
+++ b/arch/m68k/Makefile
@@ -0,0 +1,134 @@
+#
+# m68k/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Hamish Macdonald
+# Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com>
+#
+
+KBUILD_DEFCONFIG := multi_defconfig
+
+ifdef cross_compiling
+    ifeq ($(CROSS_COMPILE),)
+		CROSS_COMPILE := $(call cc-cross-prefix, \
+			m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
+    endif
+endif
+
+#
+#	Enable processor type. Ordering of these is important - we want to
+#	use the minimum processor type of the range we support. The logic
+#	for 680x0 will only allow use of the -m68060 or -m68040 if no other
+#	680x0 type is specified - and no option is specified for 68030 or
+#	68020. The other m68k/ColdFire types always specify some type of
+#	compiler cpu type flag.
+#
+ifndef CONFIG_M68040
+cpuflags-$(CONFIG_M68060)	= -m68060
+endif
+ifndef CONFIG_M68060
+cpuflags-$(CONFIG_M68040)	= -m68040
+endif
+cpuflags-$(CONFIG_M68030)	=
+cpuflags-$(CONFIG_M68020)	=
+cpuflags-$(CONFIG_M68000)	= -m68000
+cpuflags-$(CONFIG_M5441x)	= $(call cc-option,-mcpu=54455,-mcfv4e)
+cpuflags-$(CONFIG_M54xx)	= $(call cc-option,-mcpu=5475,-m5200)
+cpuflags-$(CONFIG_M5407)	= $(call cc-option,-mcpu=5407,-m5200)
+cpuflags-$(CONFIG_M532x)	= $(call cc-option,-mcpu=532x,-m5307)
+cpuflags-$(CONFIG_M537x)	= $(call cc-option,-mcpu=537x,-m5307)
+cpuflags-$(CONFIG_M5307)	= $(call cc-option,-mcpu=5307,-m5200)
+cpuflags-$(CONFIG_M528x)	= $(call cc-option,-mcpu=528x,-m5307)
+cpuflags-$(CONFIG_M5275)	= $(call cc-option,-mcpu=5275,-m5307)
+cpuflags-$(CONFIG_M5272)	= $(call cc-option,-mcpu=5272,-m5307)
+cpuflags-$(CONFIG_M5271)	= $(call cc-option,-mcpu=5271,-m5307)
+cpuflags-$(CONFIG_M523x)	= $(call cc-option,-mcpu=523x,-m5307)
+cpuflags-$(CONFIG_M525x)	= $(call cc-option,-mcpu=5253,-m5200)
+cpuflags-$(CONFIG_M5249)	= $(call cc-option,-mcpu=5249,-m5200)
+cpuflags-$(CONFIG_M520x)	= $(call cc-option,-mcpu=5208,-m5200)
+cpuflags-$(CONFIG_M5206e)	= $(call cc-option,-mcpu=5206e,-m5200)
+cpuflags-$(CONFIG_M5206)	= $(call cc-option,-mcpu=5206,-m5200)
+
+# Evaluate tune cc-option calls now
+cpuflags-y := $(cpuflags-y)
+
+KBUILD_AFLAGS += $(cpuflags-y)
+KBUILD_CFLAGS += $(cpuflags-y)
+
+KBUILD_CFLAGS += -pipe -ffreestanding
+
+ifdef CONFIG_MMU
+KBUILD_CFLAGS += -ffixed-a2
+else
+# we can use a m68k-linux-gcc toolchain with these in place
+KBUILD_CPPFLAGS += -DUTS_SYSNAME=\"uClinux\"
+KBUILD_CPPFLAGS += -D__uClinux__
+endif
+
+KBUILD_LDFLAGS := -m m68kelf
+
+ifdef CONFIG_SUN3
+LDFLAGS_vmlinux = -N
+endif
+
+CHECKFLAGS += -D__mc68000__
+
+
+ifdef CONFIG_KGDB
+# If configured for kgdb support, include debugging infos and keep the
+# frame pointer
+KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
+endif
+
+libs-y				+= arch/m68k/lib/
+
+
+all:	zImage
+
+lilo:	vmlinux
+	if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
+	if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
+	cat vmlinux > $(INSTALL_PATH)/vmlinux
+	cp System.map $(INSTALL_PATH)/System.map
+	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
+
+zImage compressed: vmlinux.gz
+
+vmlinux.gz: vmlinux
+
+ifndef CONFIG_KGDB
+	cp vmlinux vmlinux.tmp
+	$(STRIP) vmlinux.tmp
+	$(KGZIP) -9c vmlinux.tmp >vmlinux.gz
+	rm vmlinux.tmp
+else
+	$(KGZIP) -9c vmlinux >vmlinux.gz
+endif
+
+bzImage: vmlinux.bz2
+
+vmlinux.bz2: vmlinux
+
+ifndef CONFIG_KGDB
+	cp vmlinux vmlinux.tmp
+	$(STRIP) vmlinux.tmp
+	$(KBZIP2) -1c vmlinux.tmp >vmlinux.bz2
+	rm vmlinux.tmp
+else
+	$(KBZIP2) -1c vmlinux >vmlinux.bz2
+endif
+
+CLEAN_FILES += vmlinux.gz vmlinux.bz2
+
+archheaders:
+	$(Q)$(MAKE) $(build)=arch/m68k/kernel/syscalls all
+
+install: KBUILD_IMAGE := vmlinux.gz
+install:
+	$(call cmd,install)