workqueue: skip the node_nr_active update for non-unbound workqueuesgrafted

apply_wqattrs_commit() updates node_nr_active->max unconditionally.
wq->node_nr_active[] is only allocated for unbound workqueues, so guard
the call before per-cpu workqueues start using this path.

No functional change: only unbound workqueues reach apply_wqattrs_*()
today.

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

10 files changed, 2118 insertions, 0 deletions

diff --git a/arch/loongarch/boot/.gitignore b/arch/loongarch/boot/.gitignore
new file mode 100644
index 000000000..e5dc594dc
--- /dev/null
+++ b/arch/loongarch/boot/.gitignore
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vmlinux*
+vmlinuz*
diff --git a/arch/loongarch/boot/Makefile b/arch/loongarch/boot/Makefile
new file mode 100644
index 000000000..8b6d9b42b
--- /dev/null
+++ b/arch/loongarch/boot/Makefile
@@ -0,0 +1,32 @@
+#
+# arch/loongarch/boot/Makefile
+#
+# Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+#
+
+drop-sections := .comment .note .options .note.gnu.build-id
+strip-flags   := $(addprefix --remove-section=,$(drop-sections)) -S
+OBJCOPYFLAGS_vmlinux.efi := -O binary $(strip-flags)
+
+quiet_cmd_strip = STRIP	  $@
+      cmd_strip = $(STRIP) -s -o $@ $<
+
+targets := vmlinux.elf
+$(obj)/vmlinux.elf: vmlinux FORCE
+	$(call if_changed,strip)
+
+targets += vmlinux.efi
+$(obj)/vmlinux.efi: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+EFI_ZBOOT_PAYLOAD      := vmlinux.efi
+
+ifdef CONFIG_32BIT
+EFI_ZBOOT_BFD_TARGET   := elf32-loongarch
+EFI_ZBOOT_MACH_TYPE    := LOONGARCH32
+else
+EFI_ZBOOT_BFD_TARGET   := elf64-loongarch
+EFI_ZBOOT_MACH_TYPE    := LOONGARCH64
+endif
+
+include $(srctree)/drivers/firmware/efi/libstub/Makefile.zboot
diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile
new file mode 100644
index 000000000..15d5e14fe
--- /dev/null
+++ b/arch/loongarch/boot/dts/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb loongson-2k2000-ref.dtb
diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
new file mode 100644
index 000000000..7ace54c84
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k0500.dtsi"
+
+/ {
+	compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500";
+	model = "Loongson-2K0500 Reference Board";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x0ee00000>,
+		      <0x0 0x90000000 0x0 0x60000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&apbdma0 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	nand@0 {
+		reg = <0>;
+		label = "ls2k0500-nand";
+		nand-use-soft-ecc-engine;
+		nand-ecc-algo = "bch";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
+&apbdma3 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	bus-width = <4>;
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii-id";
+	bus_id = <0x0>;
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii-id";
+	bus_id = <0x1>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	eeprom@57 {
+		compatible = "atmel,24c16";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k0500.dtsi b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
new file mode 100644
index 000000000..1b502064d
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
+		};
+	};
+
+	ref_100m: clock-ref-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ref_100m";
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				cpu-alert {
+					temperature = <33000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu-crit {
+					temperature = <85000>;
+					hysteresis = <5000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		isa@16400000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x16400000 0x4000>;
+		};
+
+		clk: clock-controller@1fe10400 {
+			compatible = "loongson,ls2k0500-clk";
+			reg = <0x0 0x1fe10400 0x0 0x2c>;
+			#clock-cells = <1>;
+			clocks = <&ref_100m>;
+			clock-names = "ref_100m";
+		};
+
+		apbdma0: dma-controller@1fe10c00 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c00 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <67>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe10c10 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c10 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <68>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		apbdma2: dma-controller@1fe10c20 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c20 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <69>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		apbdma3: dma-controller@1fe10c30 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c30 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <70>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		liointc0: interrupt-controller@1fe11400 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe11400 0x0 0x40>,
+			      <0x0 0x1fe11040 0x0 0x8>;
+			reg-names = "main", "isr0";
+
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		liointc1: interrupt-controller@1fe11440 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe11440 0x0 0x40>,
+			      <0x0 0x1fe11048 0x0 0x8>;
+			reg-names = "main", "isr0";
+
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <4>;
+			interrupt-names = "int2";
+
+			loongson,parent_int_map = <0x00000000>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0xffffffff>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		eiointc: interrupt-controller@1fe11600 {
+			compatible = "loongson,ls2k0500-eiointc";
+			reg = <0x0 0x1fe11600 0x0 0xea00>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+		};
+
+		nand: nand-controller@1ff58000 {
+			compatible = "loongson,ls2k0500-nand-controller";
+			reg = <0 0x1ff58000 0 0x24>,
+			      <0 0x1ff58040 0 0x4>;
+			reg-names = "nand", "nand-dma";
+			dmas = <&apbdma0 0>;
+			dma-names = "rxtx";
+			status = "disabled";
+		};
+
+		pwm@1ff5c000 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c000 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c010 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c010 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c020 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c020 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c030 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c030 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c040 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c040 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c050 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c050 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c060 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c060 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c070 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c070 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c080 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c080 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c090 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c090 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0a0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0a0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0b0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0b0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0c0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0c0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0d0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0d0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0e0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0e0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1ff5c0f0 {
+			compatible = "loongson,ls2k0500-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1ff5c0f0 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		gmac0: ethernet@1f020000 {
+			compatible = "snps,dwmac-3.70a";
+			reg = <0x0 0x1f020000 0x0 0x10000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@1f030000 {
+			compatible = "snps,dwmac-3.70a";
+			reg = <0x0 0x1f030000 0x0 0x10000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			status = "disabled";
+		};
+
+		sata: sata@1f040000 {
+			compatible = "snps,spear-ahci";
+			reg = <0x0 0x1f040000 0x0 0x10000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <75>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1f050000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0x1f050000 0x0 0x8000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <71>;
+			status = "disabled";
+		};
+
+		ohci0: usb@1f058000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0x1f058000 0x0 0x8000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <72>;
+			status = "disabled";
+		};
+
+		tsensor: thermal-sensor@1fe11500 {
+			compatible = "loongson,ls2k0500-thermal", "loongson,ls2k1000-thermal";
+			reg = <0x0 0x1fe11500 0x0 0x30>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		uart0: serial@1ff40800 {
+			compatible = "loongson,ls2k0500-uart", "ns16550a";
+			reg = <0x0 0x1ff40800 0x0 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <2>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1ff48000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff48000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <14>;
+			status = "disabled";
+		};
+
+		i2c@1ff48800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff48800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <15>;
+			status = "disabled";
+		};
+
+		i2c@1ff49000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff49000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+
+		i2c@1ff49800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff49800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <17>;
+			status = "disabled";
+		};
+
+		i2c@1ff4a000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff4a000 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <18>;
+			status = "disabled";
+		};
+
+		i2c@1ff4a800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1ff4a800 0x0 0x0800>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <19>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@1ff64000 {
+			compatible = "loongson,ls2k0500-mmc";
+			reg = <0 0x1ff64000 0 0x2000>,
+			      <0 0x1fe10100 0 0x4>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <57>;
+			dmas = <&apbdma3 0>;
+			dma-names = "rx-tx";
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			status = "disabled";
+		};
+
+		mmc@1ff66000 {
+			compatible = "loongson,ls2k0500-mmc";
+			reg = <0 0x1ff66000 0 0x2000>,
+			      <0 0x1fe10100 0 0x4>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <58>;
+			dmas = <&apbdma2 0>;
+			dma-names = "rx-tx";
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			status = "disabled";
+		};
+
+		pmc: power-management@1ff6c000 {
+			compatible = "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x1ff6c000 0x0 0x58>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <56>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		rtc0: rtc@1ff6c100 {
+			compatible = "loongson,ls2k0500-rtc", "loongson,ls7a-rtc";
+			reg = <0x0 0x1ff6c100 0x0 0x100>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <35>;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0x5>;
+			ranges = <0x01000000 0x0 0x00004000 0x0 0x16404000 0x0 0x00004000>,
+				 <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+			pcie@0,0 {
+				reg = <0x0000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&eiointc>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 81>;
+				ranges;
+			};
+
+			pcie@1,0 {
+				reg = <0x0800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&eiointc>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 82>;
+				ranges;
+			};
+		};
+	};
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k1000-ref.dts b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
new file mode 100644
index 000000000..51b8e53cb
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/thermal/thermal.h"
+#include "loongson-2k1000.dtsi"
+
+/ {
+	compatible = "loongson,ls2k1000-ref", "loongson,ls2k1000";
+	model = "Loongson-2K1000 Reference Board";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x06e00000>,
+		      <0x0 0x08000000 0x0 0x07000000>,
+		      <0x0 0x90000000 0x1 0xe0000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <255 153 85 25>;
+		pwms = <&pwm1 0 100000 0>;
+		#cooling-cells = <2>;
+	};
+};
+
+&apbdma0 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins_default>;
+	pinctrl-names = "default";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	nand@0 {
+		reg = <0>;
+		label = "ls2k1000-nand";
+		nand-use-soft-ecc-engine;
+		nand-ecc-algo = "bch";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
+&apbdma1 {
+	status = "okay";
+};
+
+&mmc {
+	status = "okay";
+
+	pinctrl-0 = <&sdio_pins_default>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	cd-gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy1: ethernet-phy@1 {
+			reg = <16>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	pinctrl-0 = <&i2c0_pins_default>;
+	pinctrl-names = "default";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	eeprom@57 {
+		compatible = "atmel,24c16";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&pwm1 {
+	status = "okay";
+
+	pinctrl-0 = <&pwm1_pins_default>;
+	pinctrl-names = "default";
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert>;
+			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&pctrl {
+	status = "okay";
+
+	sdio_pins_default: sdio-pins {
+		sdio-pinmux {
+			groups = "sdio";
+			function = "sdio";
+		};
+		sdio-det-pinmux {
+			groups = "pwm2";
+			function = "gpio";
+		};
+	};
+
+	pwm1_pins_default: pwm1-pins {
+		pinmux {
+			groups = "pwm1";
+			function = "pwm1";
+		};
+	};
+
+	pwm0_pins_default: pwm0-pins {
+		pinmux {
+			groups = "pwm0";
+			function = "pwm0";
+		};
+	};
+
+	i2c1_pins_default: i2c1-pins {
+		pinmux {
+			groups = "i2c1";
+			function = "i2c1";
+		};
+	};
+
+	i2c0_pins_default: i2c0-pins {
+		pinmux {
+			groups = "i2c0";
+			function = "i2c0";
+		};
+	};
+
+	nand_pins_default: nand-pins {
+		pinmux {
+			groups = "nand";
+			function = "nand";
+		};
+	};
+
+	hda_pins_default: hda-pins {
+		grp0-pinmux {
+			groups = "hda";
+			function = "hda";
+		};
+		grp1-pinmux {
+			groups = "i2s";
+			function = "gpio";
+		};
+	};
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k1000.dtsi b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
new file mode 100644
index 000000000..ab6a55937
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg= <0x0>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "loongson,la264";
+			device_type = "cpu";
+			reg = <0x1>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
+		};
+	};
+
+	ref_100m: clock-ref-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ref_100m";
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	/* i2c of the dvi eeprom edid */
+	i2c-0 {
+		compatible = "i2c-gpio";
+		scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	/* i2c of the eeprom edid */
+	i2c-1 {
+		compatible = "i2c-gpio";
+		scl-gpios = <&gpio0 33 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio0 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <33000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <85000>;
+					hysteresis = <5000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-coherent;
+
+		isa@18000000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x18000000 0x4000>;
+		};
+
+		liointc0: interrupt-controller@1fe01400 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe01400 0x0 0x40>,
+			      <0x0 0x1fe01040 0x0 0x8>,
+			      <0x0 0x1fe01140 0x0 0x8>;
+			reg-names = "main", "isr0", "isr1";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		liointc1: interrupt-controller@1fe01440 {
+			compatible = "loongson,liointc-2.0";
+			reg = <0x0 0x1fe01440 0x0 0x40>,
+			      <0x0 0x1fe01048 0x0 0x8>,
+			      <0x0 0x1fe01148 0x0 0x8>;
+			reg-names = "main", "isr0", "isr1";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+			interrupt-names = "int1";
+			loongson,parent_int_map = <0x00000000>, /* int0 */
+						  <0xffffffff>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		chipid@1fe00000 {
+			compatible = "loongson,ls2k-chipid";
+			reg = <0x0 0x1fe00000 0x0 0x30>;
+			little-endian;
+		};
+
+		pctrl: pinctrl@1fe00420 {
+			compatible = "loongson,ls2k-pinctrl";
+			reg = <0x0 0x1fe00420 0x0 0x18>;
+			status = "disabled";
+		};
+
+		clk: clock-controller@1fe00480 {
+			compatible = "loongson,ls2k-clk";
+			reg = <0x0 0x1fe00480 0x0 0x58>;
+			#clock-cells = <1>;
+			clocks = <&ref_100m>;
+			clock-names = "ref_100m";
+		};
+
+		gpio0: gpio@1fe00500 {
+			compatible = "loongson,ls2k-gpio";
+			reg = <0x0 0x1fe00500 0x0 0x38>;
+			ngpios = <64>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pctrl 0x0 0x0 15>,
+				      <&pctrl 16 16 15>,
+				      <&pctrl 32 32 10>,
+				      <&pctrl 44 44 20>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>,
+				     <29 IRQ_TYPE_LEVEL_HIGH>,
+				     <30 IRQ_TYPE_LEVEL_HIGH>,
+				     <30 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 IRQ_TYPE_NONE>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_NONE>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <26 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 IRQ_TYPE_NONE>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 IRQ_TYPE_NONE>,
+				     <0 IRQ_TYPE_NONE>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>,
+				     <27 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		tsensor: thermal-sensor@1fe01500 {
+			compatible = "loongson,ls2k1000-thermal";
+			reg = <0x0 0x1fe01500 0x0 0x30>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		apbdma0: dma-controller@1fe00c00 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c00 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		apbdma1: dma-controller@1fe00c10 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c10 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		apbdma2: dma-controller@1fe00c20 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c20 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		apbdma3: dma-controller@1fe00c30 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c30 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe00c40 {
+			compatible = "loongson,ls2k1000-apbdma";
+			reg = <0x0 0x1fe00c40 0x0 0x8>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		uart0: serial@1fe20000 {
+			compatible = "loongson,ls2k1000-uart", "loongson,ls2k0500-uart", "ns16550a";
+			reg = <0x0 0x1fe20000 0x0 0x10>;
+			clock-frequency = <125000000>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <0x0 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1fe21000 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1fe21000 0x0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@1fe21800 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1fe21800 0x0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pwm@1fe22000 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22000 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@1fe22010 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22010 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1fe22020 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22020 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@1fe22030 {
+			compatible = "loongson,ls2k1000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x1fe22030 0x0 0x10>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		nand: nand-controller@1fe26000 {
+			compatible = "loongson,ls2k1000-nand-controller";
+			reg = <0 0x1fe26000 0 0x24>,
+			      <0 0x1fe26040 0 0x4>,
+			      <0 0x1fe00438 0 0x8>;
+			reg-names = "nand", "nand-dma", "dma-config";
+			dmas = <&apbdma0 0>;
+			dma-names = "rxtx";
+			status = "disabled";
+		};
+
+		pmc: power-management@1fe27000 {
+			compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x1fe27000 0x0 0x58>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		rtc0: rtc@1fe27800 {
+			compatible = "loongson,ls2k1000-rtc";
+			reg = <0x0 0x1fe27800 0x0 0x100>;
+			interrupt-parent = <&liointc1>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2s: i2s@1fe2d000 {
+			compatible = "loongson,ls2k1000-i2s";
+			reg = <0 0x1fe2d000 0 0x14>,
+			      <0 0x1fe00438 0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			dmas = <&apbdma2 0>, <&apbdma3 0>;
+			dma-names = "tx", "rx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc: mmc@1fe2c000 {
+			compatible = "loongson,ls2k1000-mmc";
+			reg = <0 0x1fe2c000 0 0x68>,
+			      <0 0x1fe00438 0 0x8>;
+			interrupt-parent = <&liointc0>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			dmas = <&apbdma1 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		spi0: spi@1fff0220 {
+			compatible = "loongson,ls2k1000-spi";
+			reg = <0x0 0x1fff0220 0x0 0x10>;
+			clocks = <&clk LOONGSON2_BOOT_CLK>;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x0 0xff>;
+			ranges = <0x01000000 0x0 0x00008000 0x0 0x18008000 0x0 0x00008000>,
+				 <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
+
+			gmac0: ethernet@3,0 {
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&liointc0 12 IRQ_TYPE_LEVEL_HIGH>,
+						      <&liointc0 13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				status = "disabled";
+			};
+
+			gmac1: ethernet@3,1 {
+				reg = <0x1900 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&liointc0 14 IRQ_TYPE_LEVEL_HIGH>,
+						      <&liointc0 15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				status = "disabled";
+			};
+
+			ehci0: usb@4,1 {
+				reg = <0x2100 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&liointc1 18 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			ohci0: usb@4,2 {
+				reg = <0x2200 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&liointc1 19 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			display@6,0 {
+				reg = <0x3000 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&liointc0 28 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			hda@7,0 {
+				reg = <0x3800 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&liointc0 4 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			sata: sata@8,0 {
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&liointc0 19 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 0x0 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@a,0 {
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@b,0 {
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@c,0 {
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@d,0 {
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@e,0 {
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&liointc1>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+		};
+	};
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
new file mode 100644
index 000000000..3c6b12220
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k2000.dtsi"
+
+/ {
+	compatible = "loongson,ls2k2000-ref", "loongson,ls2k2000";
+	model = "Loongson-2K2000 Reference Board";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x00200000 0x0 0x0ee00000>,
+		      <0x0 0x90000000 0x0 0x70000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&emmc {
+	status = "okay";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <2>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+
+	phy-mode = "gmii";
+	phy-handle = <&phy1>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy1: ethernet-phy@1 {
+			reg = <2>;
+		};
+	};
+};
+
+&gmac2 {
+	status = "okay";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy2>;
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy2: ethernet-phy@2 {
+			reg = <0>;
+		};
+	};
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
new file mode 100644
index 000000000..3678c084a
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@1 {
+			compatible = "loongson,la364";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
+		};
+
+		cpu1: cpu@2 {
+			compatible = "loongson,la364";
+			device_type = "cpu";
+			reg = <0x1>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
+		};
+	};
+
+	ref_100m: clock-ref-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ref_100m";
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				cpu-alert {
+					temperature = <40000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu-crit {
+					temperature = <85000>;
+					hysteresis = <5000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		isa@18400000 {
+			compatible = "isa";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			ranges = <1 0x0 0x0 0x18400000 0x4000>;
+		};
+
+		clk: clock-controller@10010480 {
+			compatible = "loongson,ls2k2000-clk";
+			reg = <0x0 0x10010480 0x0 0x100>;
+			#clock-cells = <1>;
+			clocks = <&ref_100m>;
+			clock-names = "ref_100m";
+		};
+
+		pmc: power-management@100d0000 {
+			compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
+			reg = <0x0 0x100d0000 0x0 0x58>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <47>;
+			loongson,suspend-address = <0x0 0x1c000500>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				offset = <0x30>;
+				mask = <0x1>;
+			};
+
+			syscon-poweroff {
+				compatible = "syscon-poweroff";
+				regmap = <&pmc>;
+				offset = <0x14>;
+				mask = <0x3c00>;
+				value = <0x3c00>;
+			};
+		};
+
+		tsensor: thermal-sensor@1fe01460 {
+			compatible = "loongson,ls2k2000-thermal";
+			reg = <0x0 0x1fe01460 0x0 0x30>,
+			      <0x0 0x1fe0019c 0x0 0x4>;
+			interrupt-parent = <&liointc>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		liointc: interrupt-controller@1fe01400 {
+			compatible = "loongson,liointc-1.0";
+			reg = <0x0 0x1fe01400 0x0 0x64>;
+
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		eiointc: interrupt-controller@1fe01600 {
+			compatible = "loongson,ls2k2000-eiointc";
+			reg = <0x0 0x1fe01600 0x0 0xea00>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+		};
+
+		pic: interrupt-controller@10000000 {
+			compatible = "loongson,pch-pic-1.0";
+			reg = <0x0 0x10000000 0x0 0x400>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			loongson,pic-base-vec = <0>;
+			interrupt-parent = <&eiointc>;
+		};
+
+		msi: msi-controller@1fe01140 {
+			compatible = "loongson,pch-msi-1.0";
+			reg = <0x0 0x1fe01140 0x0 0x8>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			msi-controller;
+			loongson,msi-base-vec = <64>;
+			loongson,msi-num-vecs = <192>;
+			interrupt-parent = <&eiointc>;
+		};
+
+		pwm@100a0000 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0000 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0100 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0100 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0200 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0200 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0300 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0300 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0400 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0400 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm@100a0500 {
+			compatible = "loongson,ls2k2000-pwm", "loongson,ls7a-pwm";
+			reg = <0x0 0x100a0500 0x0 0x10>;
+			interrupt-parent = <&pic>;
+			interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_MISC_CLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		rtc0: rtc@100d0100 {
+			compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc";
+			reg = <0x0 0x100d0100 0x0 0x100>;
+			interrupt-parent = <&pic>;
+			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c@1fe00120 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1fe00120 0x0 0x8>;
+			interrupt-parent = <&liointc>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c@1fe00130 {
+			compatible = "loongson,ls2k-i2c";
+			reg = <0x0 0x1fe00130 0x0 0x8>;
+			interrupt-parent = <&liointc>;
+			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1fe001e0 {
+			compatible = "loongson,ls2k2000-uart", "loongson,ls2k1500-uart", "ns16550a";
+			reg = <0x0 0x1fe001e0 0x0 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&liointc>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		emmc: mmc@79990000 {
+			compatible = "loongson,ls2k2000-mmc";
+			reg = <0x0 0x79990000 0x0 0x1000>;
+			interrupt-parent = <&pic>;
+			interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_EMMC_CLK>;
+			status = "disabled";
+		};
+
+		mmc@79991000 {
+			compatible = "loongson,ls2k2000-mmc";
+			reg = <0x0 0x79991000 0x0 0x1000>;
+			interrupt-parent = <&pic>;
+			interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LOONGSON2_EMMC_CLK>;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			msi-parent = <&msi>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x01000000 0x0 0x00008000 0x0 0x18408000 0x0 0x00008000>,
+				 <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>;
+
+			gmac0: ethernet@3,0 {
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&pic 12 IRQ_TYPE_LEVEL_HIGH>,
+						      <&pic 13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				status = "disabled";
+			};
+
+			gmac1: ethernet@3,1 {
+				reg = <0x1900 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&pic 14 IRQ_TYPE_LEVEL_HIGH>,
+						      <&pic 15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				status = "disabled";
+			};
+
+			gmac2: ethernet@3,2 {
+				reg = <0x1a00 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&pic 17 IRQ_TYPE_LEVEL_HIGH>,
+						      <&pic 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				status = "disabled";
+			};
+
+			xhci0: usb@4,0 {
+				reg = <0x2000 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&pic 48 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			xhci1: usb@19,0 {
+				reg = <0xc800 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&pic 22 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			display@6,1 {
+				reg = <0x3100 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&pic 28 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2s@7,0 {
+				reg = <0x3800 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&pic 78 IRQ_TYPE_LEVEL_HIGH>,
+						      <&pic 79 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			sata: sata@8,0 {
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupts-extended = <&pic 16 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 32 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@a,0 {
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 33 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@b,0 {
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 34 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@c,0 {
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 35 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@d,0 {
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 36 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@e,0 {
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 37 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@f,0 {
+				reg = <0x7800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 40 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@10,0 {
+				reg = <0x8000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 30 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+		};
+	};
+};
diff --git a/arch/loongarch/boot/install.sh b/arch/loongarch/boot/install.sh
new file mode 100755
index 000000000..daac197d3
--- /dev/null
+++ b/arch/loongarch/boot/install.sh
@@ -0,0 +1,56 @@
+#!/bin/sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+#
+# "make install" script for the LoongArch Linux port
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+
+set -e
+
+case "${2##*/}" in
+vmlinux.elf)
+  echo "Installing uncompressed vmlinux.elf kernel"
+  base=vmlinux
+  ;;
+vmlinux.efi)
+  echo "Installing uncompressed vmlinux.efi kernel"
+  base=vmlinux
+  ;;
+vmlinuz.efi)
+  echo "Installing gzip/zstd compressed vmlinuz.efi kernel"
+  base=vmlinuz
+  ;;
+*)
+ echo "Warning: Unexpected kernel type"
+ exit 1
+ ;;
+esac
+
+if [ -f $4/$base-$1 ]; then
+  mv $4/$base-$1 $4/$base-$1.old
+fi
+cat $2 > $4/$base-$1
+
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+  mv $4/System.map-$1 $4/System.map-$1.old
+fi
+cp $3 $4/System.map-$1
+
+# Install kernel config file
+if [ -f $4/config-$1 ]; then
+  mv $4/config-$1 $4/config-$1.old
+fi
+cp .config $4/config-$1