Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 162 insertions, 0 deletions

diff --git a/arch/arm64/lib/strnlen.S b/arch/arm64/lib/strnlen.S
new file mode 100644
index 000000000..d5ac0e10a
--- /dev/null
+++ b/arch/arm64/lib/strnlen.S
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ * Copyright (C) 2013 Linaro.
+ *
+ * This code is based on glibc cortex strings work originally authored by Linaro
+ * be found @
+ *
+ * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/
+ * files/head:/src/aarch64/
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * determine the length of a fixed-size string
+ *
+ * Parameters:
+ *	x0 - const string pointer
+ *	x1 - maximal string length
+ * Returns:
+ *	x0 - the return length of specific string
+ */
+
+/* Arguments and results.  */
+srcin		.req	x0
+len		.req	x0
+limit		.req	x1
+
+/* Locals and temporaries.  */
+src		.req	x2
+data1		.req	x3
+data2		.req	x4
+data2a		.req	x5
+has_nul1	.req	x6
+has_nul2	.req	x7
+tmp1		.req	x8
+tmp2		.req	x9
+tmp3		.req	x10
+tmp4		.req	x11
+zeroones	.req	x12
+pos		.req	x13
+limit_wd	.req	x14
+
+#define REP8_01 0x0101010101010101
+#define REP8_7f 0x7f7f7f7f7f7f7f7f
+#define REP8_80 0x8080808080808080
+
+SYM_FUNC_START(__pi_strnlen)
+	cbz	limit, .Lhit_limit
+	mov	zeroones, #REP8_01
+	bic	src, srcin, #15
+	ands	tmp1, srcin, #15
+	b.ne	.Lmisaligned
+	/* Calculate the number of full and partial words -1.  */
+	sub	limit_wd, limit, #1 /* Limit != 0, so no underflow.  */
+	lsr	limit_wd, limit_wd, #4  /* Convert to Qwords.  */
+
+	/*
+	* NUL detection works on the principle that (X - 1) & (~X) & 0x80
+	* (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and
+	* can be done in parallel across the entire word.
+	*/
+	/*
+	* The inner loop deals with two Dwords at a time.  This has a
+	* slightly higher start-up cost, but we should win quite quickly,
+	* especially on cores with a high number of issue slots per
+	* cycle, as we get much better parallelism out of the operations.
+	*/
+.Lloop:
+	ldp	data1, data2, [src], #16
+.Lrealigned:
+	sub	tmp1, data1, zeroones
+	orr	tmp2, data1, #REP8_7f
+	sub	tmp3, data2, zeroones
+	orr	tmp4, data2, #REP8_7f
+	bic	has_nul1, tmp1, tmp2
+	bic	has_nul2, tmp3, tmp4
+	subs	limit_wd, limit_wd, #1
+	orr	tmp1, has_nul1, has_nul2
+	ccmp	tmp1, #0, #0, pl    /* NZCV = 0000  */
+	b.eq	.Lloop
+
+	cbz	tmp1, .Lhit_limit   /* No null in final Qword.  */
+
+	/*
+	* We know there's a null in the final Qword. The easiest thing
+	* to do now is work out the length of the string and return
+	* MIN (len, limit).
+	*/
+	sub	len, src, srcin
+	cbz	has_nul1, .Lnul_in_data2
+CPU_BE( mov	data2, data1 )	/*perpare data to re-calculate the syndrome*/
+
+	sub	len, len, #8
+	mov	has_nul2, has_nul1
+.Lnul_in_data2:
+	/*
+	* For big-endian, carry propagation (if the final byte in the
+	* string is 0x01) means we cannot use has_nul directly.  The
+	* easiest way to get the correct byte is to byte-swap the data
+	* and calculate the syndrome a second time.
+	*/
+CPU_BE( rev	data2, data2 )
+CPU_BE( sub	tmp1, data2, zeroones )
+CPU_BE( orr	tmp2, data2, #REP8_7f )
+CPU_BE( bic	has_nul2, tmp1, tmp2 )
+
+	sub	len, len, #8
+	rev	has_nul2, has_nul2
+	clz	pos, has_nul2
+	add	len, len, pos, lsr #3       /* Bits to bytes.  */
+	cmp	len, limit
+	csel	len, len, limit, ls     /* Return the lower value.  */
+	ret
+
+.Lmisaligned:
+	/*
+	* Deal with a partial first word.
+	* We're doing two things in parallel here;
+	* 1) Calculate the number of words (but avoiding overflow if
+	* limit is near ULONG_MAX) - to do this we need to work out
+	* limit + tmp1 - 1 as a 65-bit value before shifting it;
+	* 2) Load and mask the initial data words - we force the bytes
+	* before the ones we are interested in to 0xff - this ensures
+	* early bytes will not hit any zero detection.
+	*/
+	ldp	data1, data2, [src], #16
+
+	sub	limit_wd, limit, #1
+	and	tmp3, limit_wd, #15
+	lsr	limit_wd, limit_wd, #4
+
+	add	tmp3, tmp3, tmp1
+	add	limit_wd, limit_wd, tmp3, lsr #4
+
+	neg	tmp4, tmp1
+	lsl	tmp4, tmp4, #3  /* Bytes beyond alignment -> bits.  */
+
+	mov	tmp2, #~0
+	/* Big-endian.  Early bytes are at MSB.  */
+CPU_BE( lsl	tmp2, tmp2, tmp4 )	/* Shift (tmp1 & 63).  */
+	/* Little-endian.  Early bytes are at LSB.  */
+CPU_LE( lsr	tmp2, tmp2, tmp4 )	/* Shift (tmp1 & 63).  */
+
+	cmp	tmp1, #8
+
+	orr	data1, data1, tmp2
+	orr	data2a, data2, tmp2
+
+	csinv	data1, data1, xzr, le
+	csel	data2, data2, data2a, le
+	b	.Lrealigned
+
+.Lhit_limit:
+	mov	len, limit
+	ret
+SYM_FUNC_END(__pi_strnlen)
+
+SYM_FUNC_ALIAS_WEAK(strnlen, __pi_strnlen)
+EXPORT_SYMBOL_NOKASAN(strnlen)