Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 367 insertions, 0 deletions

diff --git a/arch/arm/nwfpe/softfloat-specialize b/arch/arm/nwfpe/softfloat-specialize
new file mode 100644
index 000000000..679a0269d
--- /dev/null
+++ b/arch/arm/nwfpe/softfloat-specialize
@@ -0,0 +1,367 @@
+
+/*
+===============================================================================
+
+This C source fragment is part of the SoftFloat IEC/IEEE Floating-point
+Arithmetic Package, Release 2.
+
+Written by John R. Hauser.  This work was made possible in part by the
+International Computer Science Institute, located at Suite 600, 1947 Center
+Street, Berkeley, California 94704.  Funding was partially provided by the
+National Science Foundation under grant MIP-9311980.  The original version
+of this code was written as part of a project to build a fixed-point vector
+processor in collaboration with the University of California at Berkeley,
+overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
+is available through the Web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
+
+THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
+has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
+TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
+PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
+AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
+
+Derivative works are acceptable, even for commercial purposes, so long as
+(1) they include prominent notice that the work is derivative, and (2) they
+include prominent notice akin to these three paragraphs for those parts of
+this code that are retained.
+
+===============================================================================
+*/
+
+/*
+-------------------------------------------------------------------------------
+Underflow tininess-detection mode, statically initialized to default value.
+(The declaration in `softfloat.h' must match the `int8' type here.)
+-------------------------------------------------------------------------------
+*/
+int8 float_detect_tininess = float_tininess_after_rounding;
+
+/*
+-------------------------------------------------------------------------------
+Raises the exceptions specified by `flags'.  Floating-point traps can be
+defined here if desired.  It is currently not possible for such a trap to
+substitute a result value.  If traps are not implemented, this routine
+should be simply `float_exception_flags |= flags;'.
+
+ScottB:  November 4, 1998
+Moved this function out of softfloat-specialize into fpmodule.c.
+This effectively isolates all the changes required for integrating with the
+Linux kernel into fpmodule.c.  Porting to NetBSD should only require modifying
+fpmodule.c to integrate with the NetBSD kernel (I hope!).
+-------------------------------------------------------------------------------
+void float_raise( int8 flags )
+{
+    float_exception_flags |= flags;
+}
+*/
+
+/*
+-------------------------------------------------------------------------------
+Internal canonical NaN format.
+-------------------------------------------------------------------------------
+*/
+typedef struct {
+    flag sign;
+    bits64 high, low;
+} commonNaNT;
+
+/*
+-------------------------------------------------------------------------------
+The pattern for a default generated single-precision NaN.
+-------------------------------------------------------------------------------
+*/
+#define float32_default_nan 0xFFFFFFFF
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is a NaN;
+otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float32_is_nan( float32 a )
+{
+
+    return ( 0xFF000000 < (bits32) ( a<<1 ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is a signaling
+NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float32_is_signaling_nan( float32 a )
+{
+
+    return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the single-precision floating-point NaN
+`a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
+exception is raised.
+-------------------------------------------------------------------------------
+*/
+static commonNaNT float32ToCommonNaN( float32 a )
+{
+    commonNaNT z;
+
+    if ( float32_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
+    z.sign = a>>31;
+    z.low = 0;
+    z.high = ( (bits64) a )<<41;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the canonical NaN `a' to the single-
+precision floating-point format.
+-------------------------------------------------------------------------------
+*/
+static float32 commonNaNToFloat32( commonNaNT a )
+{
+
+    return ( ( (bits32) a.sign )<<31 ) | 0x7FC00000 | ( a.high>>41 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes two single-precision floating-point values `a' and `b', one of which
+is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
+signaling NaN, the invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static float32 propagateFloat32NaN( float32 a, float32 b )
+{
+    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+
+    aIsNaN = float32_is_nan( a );
+    aIsSignalingNaN = float32_is_signaling_nan( a );
+    bIsNaN = float32_is_nan( b );
+    bIsSignalingNaN = float32_is_signaling_nan( b );
+    a |= 0x00400000;
+    b |= 0x00400000;
+    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
+    if ( aIsNaN ) {
+        return ( aIsSignalingNaN & bIsNaN ) ? b : a;
+    }
+    else {
+        return b;
+    }
+
+}
+
+/*
+-------------------------------------------------------------------------------
+The pattern for a default generated double-precision NaN.
+-------------------------------------------------------------------------------
+*/
+#define float64_default_nan LIT64( 0xFFFFFFFFFFFFFFFF )
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is a NaN;
+otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float64_is_nan( float64 a )
+{
+
+    return ( LIT64( 0xFFE0000000000000 ) < (bits64) ( a<<1 ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is a signaling
+NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float64_is_signaling_nan( float64 a )
+{
+
+    return
+           ( ( ( a>>51 ) & 0xFFF ) == 0xFFE )
+        && ( a & LIT64( 0x0007FFFFFFFFFFFF ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the double-precision floating-point NaN
+`a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
+exception is raised.
+-------------------------------------------------------------------------------
+*/
+static commonNaNT float64ToCommonNaN( float64 a )
+{
+    commonNaNT z;
+
+    if ( float64_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
+    z.sign = a>>63;
+    z.low = 0;
+    z.high = a<<12;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the canonical NaN `a' to the double-
+precision floating-point format.
+-------------------------------------------------------------------------------
+*/
+static float64 commonNaNToFloat64( commonNaNT a )
+{
+
+    return
+          ( ( (bits64) a.sign )<<63 )
+        | LIT64( 0x7FF8000000000000 )
+        | ( a.high>>12 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes two double-precision floating-point values `a' and `b', one of which
+is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
+signaling NaN, the invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static float64 propagateFloat64NaN( float64 a, float64 b )
+{
+    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+
+    aIsNaN = float64_is_nan( a );
+    aIsSignalingNaN = float64_is_signaling_nan( a );
+    bIsNaN = float64_is_nan( b );
+    bIsSignalingNaN = float64_is_signaling_nan( b );
+    a |= LIT64( 0x0008000000000000 );
+    b |= LIT64( 0x0008000000000000 );
+    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
+    if ( aIsNaN ) {
+        return ( aIsSignalingNaN & bIsNaN ) ? b : a;
+    }
+    else {
+        return b;
+    }
+
+}
+
+#ifdef FLOATX80
+
+/*
+-------------------------------------------------------------------------------
+The pattern for a default generated extended double-precision NaN.  The
+`high' and `low' values hold the most- and least-significant bits,
+respectively.
+-------------------------------------------------------------------------------
+*/
+#define floatx80_default_nan_high 0xFFFF
+#define floatx80_default_nan_low  LIT64( 0xFFFFFFFFFFFFFFFF )
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is a
+NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_is_nan( floatx80 a )
+{
+
+    return ( ( a.high & 0x7FFF ) == 0x7FFF ) && (bits64) ( a.low<<1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is a
+signaling NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_is_signaling_nan( floatx80 a )
+{
+    //register int lr;
+    bits64 aLow;
+
+    //__asm__("mov %0, lr" : : "g" (lr));
+    //fp_printk("floatx80_is_signalling_nan() called from 0x%08x\n",lr);
+    aLow = a.low & ~ LIT64( 0x4000000000000000 );
+    return
+           ( ( a.high & 0x7FFF ) == 0x7FFF )
+        && (bits64) ( aLow<<1 )
+        && ( a.low == aLow );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the extended double-precision floating-
+point NaN `a' to the canonical NaN format.  If `a' is a signaling NaN, the
+invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static commonNaNT floatx80ToCommonNaN( floatx80 a )
+{
+    commonNaNT z;
+
+    if ( floatx80_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
+    z.sign = a.high>>15;
+    z.low = 0;
+    z.high = a.low<<1;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the canonical NaN `a' to the extended
+double-precision floating-point format.
+-------------------------------------------------------------------------------
+*/
+static floatx80 commonNaNToFloatx80( commonNaNT a )
+{
+    floatx80 z;
+
+    z.low = LIT64( 0xC000000000000000 ) | ( a.high>>1 );
+    z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF;
+    z.__padding = 0;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes two extended double-precision floating-point values `a' and `b', one
+of which is a NaN, and returns the appropriate NaN result.  If either `a' or
+`b' is a signaling NaN, the invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static floatx80 propagateFloatx80NaN( floatx80 a, floatx80 b )
+{
+    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+
+    aIsNaN = floatx80_is_nan( a );
+    aIsSignalingNaN = floatx80_is_signaling_nan( a );
+    bIsNaN = floatx80_is_nan( b );
+    bIsSignalingNaN = floatx80_is_signaling_nan( b );
+    a.low |= LIT64( 0xC000000000000000 );
+    b.low |= LIT64( 0xC000000000000000 );
+    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
+    if ( aIsNaN ) {
+        return ( aIsSignalingNaN & bIsNaN ) ? b : a;
+    }
+    else {
+        return b;
+    }
+
+}
+
+#endif