Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 460 insertions, 0 deletions

diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
new file mode 100644
index 000000000..726681fb7
--- /dev/null
+++ b/arch/arm/mm/cache-v7.S
@@ -0,0 +1,460 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/arch/arm/mm/cache-v7.S
+ *
+ *  Copyright (C) 2001 Deep Blue Solutions Ltd.
+ *  Copyright (C) 2005 ARM Ltd.
+ *
+ *  This is the "shell" of the ARMv7 processor support.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/cfi_types.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+#include <asm/unwind.h>
+#include <asm/hardware/cache-b15-rac.h>
+
+#include "proc-macros.S"
+
+.arch armv7-a
+
+#ifdef CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND
+.globl icache_size
+	.data
+	.align	2
+icache_size:
+	.long	64
+	.text
+#endif
+/*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor.  We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This function needs to be called for both secondary cores startup and
+ * primary core resume procedures.
+ */
+ENTRY(v7_invalidate_l1)
+	mov	r0, #0
+	mcr	p15, 2, r0, c0, c0, 0	@ select L1 data cache in CSSELR
+	isb
+	mrc	p15, 1, r0, c0, c0, 0	@ read cache geometry from CCSIDR
+
+	movw	r3, #0x3ff
+	and	r3, r3, r0, lsr #3	@ 'Associativity' in CCSIDR[12:3]
+	clz	r1, r3			@ WayShift
+	mov	r2, #1
+	mov	r3, r3, lsl r1		@ NumWays-1 shifted into bits [31:...]
+	movs	r1, r2, lsl r1		@ #1 shifted left by same amount
+	moveq	r1, #1			@ r1 needs value > 0 even if only 1 way
+
+	and	r2, r0, #0x7
+	add	r2, r2, #4		@ SetShift
+
+1:	movw	ip, #0x7fff
+	and	r0, ip, r0, lsr #13	@ 'NumSets' in CCSIDR[27:13]
+
+2:	mov	ip, r0, lsl r2		@ NumSet << SetShift
+	orr	ip, ip, r3		@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, ip, c7, c6, 2
+	subs	r0, r0, #1		@ Set--
+	bpl	2b
+	subs	r3, r3, r1		@ Way--
+	bcc	3f
+	mrc	p15, 1, r0, c0, c0, 0	@ re-read cache geometry from CCSIDR
+	b	1b
+3:	dsb	st
+	isb
+	ret	lr
+ENDPROC(v7_invalidate_l1)
+
+/*
+ *	v7_flush_icache_all()
+ *
+ *	Flush the whole I-cache.
+ *
+ *	Registers:
+ *	r0 - set to 0
+ */
+SYM_TYPED_FUNC_START(v7_flush_icache_all)
+	mov	r0, #0
+	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)		@ invalidate I-cache inner shareable
+	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)		@ I+BTB cache invalidate
+	ret	lr
+SYM_FUNC_END(v7_flush_icache_all)
+
+ /*
+ *     v7_flush_dcache_louis()
+ *
+ *     Flush the D-cache up to the Level of Unification Inner Shareable
+ *
+ *     Corrupted registers: r0-r6, r9-r10
+ */
+
+ENTRY(v7_flush_dcache_louis)
+	dmb					@ ensure ordering with previous memory accesses
+	mrc	p15, 1, r0, c0, c0, 1		@ read clidr, r0 = clidr
+ALT_SMP(mov	r3, r0, lsr #20)		@ move LoUIS into position
+ALT_UP(	mov	r3, r0, lsr #26)		@ move LoUU into position
+	ands	r3, r3, #7 << 1 		@ extract LoU*2 field from clidr
+	bne	start_flush_levels		@ LoU != 0, start flushing
+#ifdef CONFIG_ARM_ERRATA_643719
+ALT_SMP(mrc	p15, 0, r2, c0, c0, 0)		@ read main ID register
+ALT_UP(	ret	lr)				@ LoUU is zero, so nothing to do
+	movw	r1, #:lower16:(0x410fc090 >> 4)	@ ID of ARM Cortex A9 r0p?
+	movt	r1, #:upper16:(0x410fc090 >> 4)
+	teq	r1, r2, lsr #4			@ test for errata affected core and if so...
+	moveq	r3, #1 << 1			@   fix LoUIS value
+	beq	start_flush_levels		@   start flushing cache levels
+#endif
+	ret	lr
+ENDPROC(v7_flush_dcache_louis)
+
+/*
+ *	v7_flush_dcache_all()
+ *
+ *	Flush the whole D-cache.
+ *
+ *	Corrupted registers: r0-r6, r9-r10
+ *
+ *	- mm    - mm_struct describing address space
+ */
+ENTRY(v7_flush_dcache_all)
+	dmb					@ ensure ordering with previous memory accesses
+	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
+	mov	r3, r0, lsr #23			@ move LoC into position
+	ands	r3, r3, #7 << 1			@ extract LoC*2 from clidr
+	beq	finished			@ if loc is 0, then no need to clean
+start_flush_levels:
+	mov	r10, #0				@ start clean at cache level 0
+flush_levels:
+	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
+	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
+	and	r1, r1, #7			@ mask of the bits for current cache only
+	cmp	r1, #2				@ see what cache we have at this level
+	blt	skip				@ skip if no cache, or just i-cache
+#ifdef CONFIG_PREEMPTION
+	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
+#endif
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	isb					@ isb to sych the new cssr&csidr
+	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
+#ifdef CONFIG_PREEMPTION
+	restore_irqs_notrace r9
+#endif
+	and	r2, r1, #7			@ extract the length of the cache lines
+	add	r2, r2, #4			@ add 4 (line length offset)
+	movw	r4, #0x3ff
+	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
+	clz	r5, r4				@ find bit position of way size increment
+	movw	r6, #0x7fff
+	and	r1, r6, r1, lsr #13		@ extract max number of the index size
+	mov	r6, #1
+	movne	r4, r4, lsl r5			@ # of ways shifted into bits [31:...]
+	movne	r6, r6, lsl r5			@ 1 shifted left by same amount
+loop1:
+	mov	r9, r1				@ create working copy of max index
+loop2:
+	mov	r5, r9, lsl r2			@ factor set number into r5
+	orr	r5, r5, r4			@ factor way number into r5
+	orr	r5, r5, r10			@ factor cache level into r5
+	mcr	p15, 0, r5, c7, c14, 2		@ clean & invalidate by set/way
+	subs	r9, r9, #1			@ decrement the index
+	bge	loop2
+	subs	r4, r4, r6			@ decrement the way
+	bcs	loop1
+skip:
+	add	r10, r10, #2			@ increment cache number
+	cmp	r3, r10
+#ifdef CONFIG_ARM_ERRATA_814220
+	dsb
+#endif
+	bgt	flush_levels
+finished:
+	mov	r10, #0				@ switch back to cache level 0
+	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
+	dsb	st
+	isb
+	ret	lr
+ENDPROC(v7_flush_dcache_all)
+
+/*
+ *	v7_flush_cache_all()
+ *
+ *	Flush the entire cache system.
+ *  The data cache flush is now achieved using atomic clean / invalidates
+ *  working outwards from L1 cache. This is done using Set/Way based cache
+ *  maintenance instructions.
+ *  The instruction cache can still be invalidated back to the point of
+ *  unification in a single instruction.
+ *
+ */
+SYM_TYPED_FUNC_START(v7_flush_kern_cache_all)
+	stmfd	sp!, {r4-r6, r9-r10, lr}
+	bl	v7_flush_dcache_all
+	mov	r0, #0
+	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)	@ invalidate I-cache inner shareable
+	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)	@ I+BTB cache invalidate
+	ldmfd	sp!, {r4-r6, r9-r10, lr}
+	ret	lr
+SYM_FUNC_END(v7_flush_kern_cache_all)
+
+ /*
+ *     v7_flush_kern_cache_louis(void)
+ *
+ *     Flush the data cache up to Level of Unification Inner Shareable.
+ *     Invalidate the I-cache to the point of unification.
+ */
+SYM_TYPED_FUNC_START(v7_flush_kern_cache_louis)
+	stmfd	sp!, {r4-r6, r9-r10, lr}
+	bl	v7_flush_dcache_louis
+	mov	r0, #0
+	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)	@ invalidate I-cache inner shareable
+	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)	@ I+BTB cache invalidate
+	ldmfd	sp!, {r4-r6, r9-r10, lr}
+	ret	lr
+SYM_FUNC_END(v7_flush_kern_cache_louis)
+
+/*
+ *	v7_flush_cache_all()
+ *
+ *	Flush all TLB entries in a particular address space
+ *
+ *	- mm    - mm_struct describing address space
+ */
+SYM_TYPED_FUNC_START(v7_flush_user_cache_all)
+	ret	lr
+SYM_FUNC_END(v7_flush_user_cache_all)
+
+/*
+ *	v7_flush_cache_range(start, end, flags)
+ *
+ *	Flush a range of TLB entries in the specified address space.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end   - end address (exclusive, may not be aligned)
+ *	- flags	- vm_area_struct flags describing address space
+ *
+ *	It is assumed that:
+ *	- we have a VIPT cache.
+ */
+SYM_TYPED_FUNC_START(v7_flush_user_cache_range)
+	ret	lr
+SYM_FUNC_END(v7_flush_user_cache_range)
+
+/*
+ *	v7_coherent_kern_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified
+ *	region.  This is typically used when code has been written to
+ *	a memory region, and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ *
+ *	It is assumed that:
+ *	- the Icache does not read data from the write buffer
+ */
+SYM_TYPED_FUNC_START(v7_coherent_kern_range)
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
+	b	v7_coherent_user_range
+#endif
+SYM_FUNC_END(v7_coherent_kern_range)
+
+/*
+ *	v7_coherent_user_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified
+ *	region.  This is typically used when code has been written to
+ *	a memory region, and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ *
+ *	It is assumed that:
+ *	- the Icache does not read data from the write buffer
+ */
+SYM_TYPED_FUNC_START(v7_coherent_user_range)
+ UNWIND(.fnstart		)
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r12, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
+1:
+ USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
+	add	r12, r12, r2
+	cmp	r12, r1
+	blo	1b
+	dsb	ishst
+#ifdef CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND
+	ldr	r3, =icache_size
+	ldr	r2, [r3, #0]
+#else
+	icache_line_size r2, r3
+#endif
+	sub	r3, r2, #1
+	bic	r12, r0, r3
+2:
+ USER(	mcr	p15, 0, r12, c7, c5, 1	)	@ invalidate I line
+	add	r12, r12, r2
+	cmp	r12, r1
+	blo	2b
+	mov	r0, #0
+	ALT_SMP(mcr	p15, 0, r0, c7, c1, 6)	@ invalidate BTB Inner Shareable
+	ALT_UP(mcr	p15, 0, r0, c7, c5, 6)	@ invalidate BTB
+	dsb	ishst
+	isb
+	ret	lr
+
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, fail with -EFAULT.
+ */
+9001:
+#ifdef CONFIG_ARM_ERRATA_775420
+	dsb
+#endif
+	mov	r0, #-EFAULT
+	ret	lr
+ UNWIND(.fnend		)
+SYM_FUNC_END(v7_coherent_user_range)
+
+/*
+ *	v7_flush_kern_dcache_area(void *addr, size_t size)
+ *
+ *	Ensure that the data held in the page kaddr is written back
+ *	to the page in question.
+ *
+ *	- addr	- kernel address
+ *	- size	- region size
+ */
+SYM_TYPED_FUNC_START(v7_flush_kern_dcache_area)
+	dcache_line_size r2, r3
+	add	r1, r0, r1
+	sub	r3, r2, #1
+	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
+1:
+	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line / unified line
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	dsb	st
+	ret	lr
+SYM_FUNC_END(v7_flush_kern_dcache_area)
+
+/*
+ *	v7_dma_inv_range(start,end)
+ *
+ *	Invalidate the data cache within the specified region; we will
+ *	be performing a DMA operation in this region and we want to
+ *	purge old data in the cache.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+v7_dma_inv_range:
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	tst	r0, r3
+	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
+	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
+	addne	r0, r0, r2
+
+	tst	r1, r3
+	bic	r1, r1, r3
+	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D / U line
+	cmp	r0, r1
+1:
+	mcrlo	p15, 0, r0, c7, c6, 1		@ invalidate D / U line
+	addlo	r0, r0, r2
+	cmplo	r0, r1
+	blo	1b
+	dsb	st
+	ret	lr
+ENDPROC(v7_dma_inv_range)
+
+/*
+ *	v7_dma_clean_range(start,end)
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+v7_dma_clean_range:
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
+1:
+	mcr	p15, 0, r0, c7, c10, 1		@ clean D / U line
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	dsb	st
+	ret	lr
+ENDPROC(v7_dma_clean_range)
+
+/*
+ *	v7_dma_flush_range(start,end)
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+SYM_TYPED_FUNC_START(v7_dma_flush_range)
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
+1:
+	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	dsb	st
+	ret	lr
+SYM_FUNC_END(v7_dma_flush_range)
+
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+SYM_TYPED_FUNC_START(v7_dma_map_area)
+	add	r1, r1, r0
+	teq	r2, #DMA_FROM_DEVICE
+	beq	v7_dma_inv_range
+	b	v7_dma_clean_range
+SYM_FUNC_END(v7_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+SYM_TYPED_FUNC_START(v7_dma_unmap_area)
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	bne	v7_dma_inv_range
+	ret	lr
+SYM_FUNC_END(v7_dma_unmap_area)