Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 167 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
new file mode 100644
index 000000000..5677c4a08
--- /dev/null
+++ b/arch/arm/mach-omap2/timer.c
@@ -0,0 +1,167 @@
+/*
+ * linux/arch/arm/mach-omap2/timer.c
+ *
+ * OMAP2 GP timer support.
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Update to use new clocksource/clockevent layers
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Original driver:
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *         Juha Yrjölä <juha.yrjola@nokia.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
+ *
+ * Some parts based off of TI's 24xx code:
+ *
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
+ *
+ * Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+
+#include "soc.h"
+#include "common.h"
+#include "control.h"
+#include "omap-secure.h"
+
+#define REALTIME_COUNTER_BASE				0x48243200
+#define INCREMENTER_NUMERATOR_OFFSET			0x10
+#define INCREMENTER_DENUMERATOR_RELOAD_OFFSET		0x14
+#define NUMERATOR_DENUMERATOR_MASK			0xfffff000
+
+static unsigned long arch_timer_freq;
+
+void set_cntfreq(void)
+{
+	omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
+}
+
+/*
+ * The realtime counter also called master counter, is a free-running
+ * counter, which is related to real time. It produces the count used
+ * by the CPU local timer peripherals in the MPU cluster. The timer counts
+ * at a rate of 6.144 MHz. Because the device operates on different clocks
+ * in different power modes, the master counter shifts operation between
+ * clocks, adjusting the increment per clock in hardware accordingly to
+ * maintain a constant count rate.
+ */
+static void __init realtime_counter_init(void)
+{
+	void __iomem *base;
+	static struct clk *sys_clk;
+	unsigned long rate;
+	unsigned int reg;
+	unsigned long long num, den;
+
+	base = ioremap(REALTIME_COUNTER_BASE, SZ_32);
+	if (!base) {
+		pr_err("%s: ioremap failed\n", __func__);
+		return;
+	}
+	sys_clk = clk_get(NULL, "sys_clkin");
+	if (IS_ERR(sys_clk)) {
+		pr_err("%s: failed to get system clock handle\n", __func__);
+		iounmap(base);
+		return;
+	}
+
+	rate = clk_get_rate(sys_clk);
+	clk_put(sys_clk);
+
+	if (soc_is_dra7xx()) {
+		/*
+		 * Errata i856 says the 32.768KHz crystal does not start at
+		 * power on, so the CPU falls back to an emulated 32KHz clock
+		 * based on sysclk / 610 instead. This causes the master counter
+		 * frequency to not be 6.144MHz but at sysclk / 610 * 375 / 2
+		 * (OR sysclk * 75 / 244)
+		 *
+		 * This affects at least the DRA7/AM572x 1.0, 1.1 revisions.
+		 * Of course any board built without a populated 32.768KHz
+		 * crystal would also need this fix even if the CPU is fixed
+		 * later.
+		 *
+		 * Either case can be detected by using the two speedselect bits
+		 * If they are not 0, then the 32.768KHz clock driving the
+		 * coarse counter that corrects the fine counter every time it
+		 * ticks is actually rate/610 rather than 32.768KHz and we
+		 * should compensate to avoid the 570ppm (at 20MHz, much worse
+		 * at other rates) too fast system time.
+		 */
+		reg = omap_ctrl_readl(DRA7_CTRL_CORE_BOOTSTRAP);
+		if (reg & DRA7_SPEEDSELECT_MASK) {
+			num = 75;
+			den = 244;
+			goto sysclk1_based;
+		}
+	}
+
+	/* Numerator/denumerator values refer TRM Realtime Counter section */
+	switch (rate) {
+	case 12000000:
+		num = 64;
+		den = 125;
+		break;
+	case 13000000:
+		num = 768;
+		den = 1625;
+		break;
+	case 19200000:
+		num = 8;
+		den = 25;
+		break;
+	case 20000000:
+		num = 192;
+		den = 625;
+		break;
+	case 26000000:
+		num = 384;
+		den = 1625;
+		break;
+	case 27000000:
+		num = 256;
+		den = 1125;
+		break;
+	case 38400000:
+	default:
+		/* Program it for 38.4 MHz */
+		num = 4;
+		den = 25;
+		break;
+	}
+
+sysclk1_based:
+	/* Program numerator and denumerator registers */
+	reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) &
+			NUMERATOR_DENUMERATOR_MASK;
+	reg |= num;
+	writel_relaxed(reg, base + INCREMENTER_NUMERATOR_OFFSET);
+
+	reg = readl_relaxed(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) &
+			NUMERATOR_DENUMERATOR_MASK;
+	reg |= den;
+	writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
+
+	arch_timer_freq = DIV_ROUND_UP_ULL(rate * num, den);
+	set_cntfreq();
+
+	iounmap(base);
+}
+
+void __init omap5_realtime_timer_init(void)
+{
+	omap_clk_init();
+	realtime_counter_init();
+
+	timer_probe();
+}