sched/cache: Keep nr_pref_llc_running in the runnable domain, to fix LLC mis-scheduling buggrafted

alb_break_llc() decides whether to break LLC preference during active
load balance. It does so by testing that every runnable fair task on the
source rq prefers its LLC:

	env->src_rq->nr_pref_llc_running == env->src_rq->cfs.h_nr_runnable

But the two counters cover different sets. nr_pref_llc_running is updated
in account_llc_enqueue()/account_llc_dequeue(), next to cfs_rq->nr_queued,
so it follows queued tasks. h_nr_runnable is updated in set_delayed()/
clear_delayed() and drops delay-dequeued tasks.

So under DELAY_DEQUEUE, a preferring task that goes to sleep stays counted
in nr_pref_llc_running while h_nr_runnable falls. The equality then breaks,
alb_break_llc() returns false, and active balance is free to pull a task
off its preferred LLC. Active balance only moves runnable tasks, and this
is the only LLC check it consults: once the stopper runs, LBF_ACTIVE_LB
skips the per-task test in can_migrate_task(). The runnable set is the one
we want.

Fix it on the counter side. A task should be counted in
nr_pref_llc_running exactly while it is both queued on its preferred LLC
(pref_llc_queued) and runnable (!sched_delayed). Define that membership
once in task_pref_llc_runnable(), and adjust the counter only through
pref_llc_running_inc()/pref_llc_running_dec() from the four sites that
change either input: account_llc_enqueue(), account_llc_dequeue(),
set_delayed() and clear_delayed(). Gating every update on the same
predicate keeps the delay, wake and dequeue paths from double-counting
or underflowing; see the comments at those sites for the ordering.

nr_llc_running and sd->llc_counts are not touched and stay on queued
semantics.

Fixes: 714059f79ff0 ("sched/cache: Handle moving single tasks to/from their preferred LLC")
Closes: https://lore.kernel.org/lkml/20260827135000.735138-1-zhanxusheng@xiaomi.com/
Reported-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Suggested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kayra Cizmeci <kayracizmeci@gmail.com>
Cc: <stable@kernel.org> # v7.2.x
Link: https://patch.msgid.link/06af61afedac32e6477f57feb4d658f6c411c3af.1790035273.git.tim.c.chen@linux.intel.com

1 files changed, 131 insertions, 0 deletions

diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
new file mode 100644
index 000000000..293a2716b
--- /dev/null
+++ b/arch/arm/lib/backtrace.S
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/arch/arm/lib/backtrace.S
+ *
+ *  Copyright (C) 1995, 1996 Russell King
+ *
+ * 27/03/03 Ian Molton Clean up CONFIG_CPU
+ */
+#include <linux/kern_levels.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+		.text
+
+@ fp is 0 or stack frame
+
+#define frame	r4
+#define sv_fp	r5
+#define sv_pc	r6
+#define mask	r7
+#define offset	r8
+#define loglvl	r9
+
+ENTRY(c_backtrace)
+
+#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
+		ret	lr
+ENDPROC(c_backtrace)
+#else
+		stmfd	sp!, {r4 - r9, lr}	@ Save an extra register so we have a location...
+		movs	frame, r0		@ if frame pointer is zero
+		beq	no_frame		@ we have no stack frames
+		mov	loglvl, r2
+
+		tst	r1, #0x10		@ 26 or 32-bit mode?
+ ARM(		moveq	mask, #0xfc000003	)
+ THUMB(		moveq	mask, #0xfc000000	)
+ THUMB(		orreq	mask, #0x03		)
+		movne	mask, #0		@ mask for 32-bit
+
+1:		stmfd	sp!, {pc}		@ calculate offset of PC stored
+		ldr	r0, [sp], #4		@ by stmfd for this CPU
+		adr	r1, 1b
+		sub	offset, r0, r1
+
+/*
+ * Stack frame layout:
+ *             optionally saved caller registers (r4 - r10)
+ *             saved fp
+ *             saved sp
+ *             saved lr
+ *    frame => saved pc
+ *             optionally saved arguments (r0 - r3)
+ * saved sp => <next word>
+ *
+ * Functions start with the following code sequence:
+ *                  mov   ip, sp
+ *                  stmfd sp!, {r0 - r3} (optional)
+ * corrected pc =>  stmfd sp!, {..., fp, ip, lr, pc}
+ */
+for_each_frame:	tst	frame, mask		@ Check for address exceptions
+		bne	no_frame
+
+1001:		ldr	sv_pc, [frame, #0]	@ get saved pc
+1002:		ldr	sv_fp, [frame, #-12]	@ get saved fp
+
+		sub	sv_pc, sv_pc, offset	@ Correct PC for prefetching
+		bic	sv_pc, sv_pc, mask	@ mask PC/LR for the mode
+
+1003:		ldr	r2, [sv_pc, #-4]	@ if stmfd sp!, {args} exists,
+		ldr	r3, .Ldsi+4		@ adjust saved 'pc' back one
+		teq	r3, r2, lsr #11		@ instruction
+		subne	r0, sv_pc, #4		@ allow for mov
+		subeq	r0, sv_pc, #8		@ allow for mov + stmia
+
+		ldr	r1, [frame, #-4]	@ get saved lr
+		mov	r2, frame
+		bic	r1, r1, mask		@ mask PC/LR for the mode
+		mov	r3, loglvl
+		bl	dump_backtrace_entry
+
+		ldr	r1, [sv_pc, #-4]	@ if stmfd sp!, {args} exists,
+		ldr	r3, .Ldsi+4
+		teq	r3, r1, lsr #11
+		ldreq	r0, [frame, #-8]	@ get sp
+		subeq	r0, r0, #4		@ point at the last arg
+		mov	r2, loglvl
+		bleq	dump_backtrace_stm	@ dump saved registers
+
+1004:		ldr	r1, [sv_pc, #0]		@ if stmfd sp!, {..., fp, ip, lr, pc}
+		ldr	r3, .Ldsi		@ instruction exists,
+		teq	r3, r1, lsr #11
+		subeq	r0, frame, #16
+		mov	r2, loglvl
+		bleq	dump_backtrace_stm	@ dump saved registers
+
+		teq	sv_fp, #0		@ zero saved fp means
+		beq	no_frame		@ no further frames
+
+		cmp	sv_fp, frame		@ next frame must be
+		mov	frame, sv_fp		@ above the current frame
+#ifdef CONFIG_IRQSTACKS
+		@
+		@ Kernel stacks may be discontiguous in memory. If the next
+		@ frame is below the previous frame, accept it as long as it
+		@ lives in kernel memory.
+		@
+		cmpls	sv_fp, #PAGE_OFFSET
+#endif
+		bhi	for_each_frame
+
+1006:		adr	r0, .Lbad
+		mov	r1, loglvl
+		mov	r2, frame
+		bl	_printk
+no_frame:	ldmfd	sp!, {r4 - r9, pc}
+ENDPROC(c_backtrace)
+		
+		.pushsection __ex_table,"a"
+		.align	3
+		.long	1001b, 1006b
+		.long	1002b, 1006b
+		.long	1003b, 1006b
+		.long	1004b, 1006b
+		.popsection
+
+.Lbad:		.asciz	"%sBacktrace aborted due to bad frame pointer <%p>\n"
+		.align
+.Ldsi:		.word	0xe92dd800 >> 11	@ stmfd sp!, {... fp, ip, lr, pc}
+		.word	0xe92d0000 >> 11	@ stmfd sp!, {}
+
+#endif