objtool: Validate disassembler headers in libopcodes probegrafted

commit 3f2de814c059 ("objtool: Fix libopcodes linking with static libraries")
tested for libopcodes availability by linking a test snippet with a forward
declaration of disassemble_init_for_target().

However, testing symbol linkage with an extern declaration only verifies
the presence of the library (.so/.a) and bypasses checking for development
headers (binutils-dev). On systems where libopcodes is present without
development headers installed, the probe succeeds, enabling BUILD_DISAS.
Subsequent compilation of objtool then fails:

  fatal error: 'bfd.h' file not found
    113 | #include <bfd.h>

Additionally, the probe invokes $(HOSTCC) without $(HOSTCFLAGS), ignoring
any sysroot or include flags specified for the host compiler.

Fix this by including <bfd.h> and <dis-asm.h> directly in the test snippet,
passing $(HOSTCFLAGS) so host compiler options are respected, and defining
PACKAGE="objtool" to satisfy the configuration check in <bfd.h>.

Fixes: 3f2de814c059 ("objtool: Fix libopcodes linking with static libraries")
Fixes: 436326bc525d ("objtool: fix build failure due to missing libopcodes check")
Reported-by: Alice Ryhl <aliceryhl@google.com>
Assisted-by: Antigravity:Gemini-Next
Signed-off-by: Ulises Mendez Martinez <umendez@google.com>
Link: https://patch.msgid.link/20260904150710.2997558-1-umendez@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>

1 files changed, 93 insertions, 0 deletions

diff --git a/arch/arc/lib/strcmp.S b/arch/arc/lib/strcmp.S
new file mode 100644
index 000000000..b20c98fb3
--- /dev/null
+++ b/arch/arc/lib/strcmp.S
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/* This is optimized primarily for the ARC700.
+   It would be possible to speed up the loops by one cycle / word
+   respective one cycle / byte by forcing double source 1 alignment, unrolling
+   by a factor of two, and speculatively loading the second word / byte of
+   source 1; however, that would increase the overhead for loop setup / finish,
+   and strcmp might often terminate early.  */
+
+#include <linux/linkage.h>
+
+ENTRY_CFI(strcmp)
+	or	r2,r0,r1
+	bmsk_s	r2,r2,1
+	brne	r2,0,.Lcharloop
+	mov_s	r12,0x01010101
+	ror	r5,r12
+.Lwordloop:
+	ld.ab	r2,[r0,4]
+	ld.ab	r3,[r1,4]
+	nop_s
+	sub	r4,r2,r12
+	bic	r4,r4,r2
+	and	r4,r4,r5
+	brne	r4,0,.Lfound0
+	breq	r2,r3,.Lwordloop
+#ifdef	__LITTLE_ENDIAN__
+	xor	r0,r2,r3	; mask for difference
+	sub_s	r1,r0,1
+	bic_s	r0,r0,r1	; mask for least significant difference bit
+	sub	r1,r5,r0
+	xor	r0,r5,r1	; mask for least significant difference byte
+	and_s	r2,r2,r0
+	and_s	r3,r3,r0
+#endif /* LITTLE ENDIAN */
+	cmp_s	r2,r3
+	mov_s	r0,1
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+
+	.balign	4
+#ifdef __LITTLE_ENDIAN__
+.Lfound0:
+	xor	r0,r2,r3	; mask for difference
+	or	r0,r0,r4	; or in zero indicator
+	sub_s	r1,r0,1
+	bic_s	r0,r0,r1	; mask for least significant difference bit
+	sub	r1,r5,r0
+	xor	r0,r5,r1	; mask for least significant difference byte
+	and_s	r2,r2,r0
+	and_s	r3,r3,r0
+	sub.f	r0,r2,r3
+	mov.hi	r0,1
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+#else /* BIG ENDIAN */
+	/* The zero-detection above can mis-detect 0x01 bytes as zeroes
+	   because of carry-propagateion from a lower significant zero byte.
+	   We can compensate for this by checking that bit0 is zero.
+	   This compensation is not necessary in the step where we
+	   get a low estimate for r2, because in any affected bytes
+	   we already have 0x00 or 0x01, which will remain unchanged
+	   when bit 7 is cleared.  */
+	.balign	4
+.Lfound0:
+	lsr	r0,r4,8
+	lsr_s	r1,r2
+	bic_s	r2,r2,r0	; get low estimate for r2 and get ...
+	bic_s	r0,r0,r1	; <this is the adjusted mask for zeros>
+	or_s	r3,r3,r0	; ... high estimate r3 so that r2 > r3 will ...
+	cmp_s	r3,r2		; ... be independent of trailing garbage
+	or_s	r2,r2,r0	; likewise for r3 > r2
+	bic_s	r3,r3,r0
+	rlc	r0,0		; r0 := r2 > r3 ? 1 : 0
+	cmp_s	r2,r3
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+#endif /* ENDIAN */
+
+	.balign	4
+.Lcharloop:
+	ldb.ab	r2,[r0,1]
+	ldb.ab	r3,[r1,1]
+	nop_s
+	breq	r2,0,.Lcmpend
+	breq	r2,r3,.Lcharloop
+.Lcmpend:
+	j_s.d	[blink]
+	sub	r0,r2,r3
+END_CFI(strcmp)