scftorture: Count single_rpc offline failures in statistics outputgrafted

scf_torture_stats_print() aggregates each invoker thread's counters
into a local scf_statistics structure before printing, but the
n_single_rpc_ofl field is missing from the aggregation loop.  As a
result, the "single_rpc_ofl" value printed in the statistics line is
always zero, even when smp_call_function_single() invocations for the
RPC test have failed due to offline CPUs and been counted by the
invoker threads.

Add the missing accumulation so that the printed value reflects the
actual counts.

Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

1 files changed, 93 insertions, 0 deletions

diff --git a/arch/arc/lib/strcmp.S b/arch/arc/lib/strcmp.S
new file mode 100644
index 000000000..b20c98fb3
--- /dev/null
+++ b/arch/arc/lib/strcmp.S
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/* This is optimized primarily for the ARC700.
+   It would be possible to speed up the loops by one cycle / word
+   respective one cycle / byte by forcing double source 1 alignment, unrolling
+   by a factor of two, and speculatively loading the second word / byte of
+   source 1; however, that would increase the overhead for loop setup / finish,
+   and strcmp might often terminate early.  */
+
+#include <linux/linkage.h>
+
+ENTRY_CFI(strcmp)
+	or	r2,r0,r1
+	bmsk_s	r2,r2,1
+	brne	r2,0,.Lcharloop
+	mov_s	r12,0x01010101
+	ror	r5,r12
+.Lwordloop:
+	ld.ab	r2,[r0,4]
+	ld.ab	r3,[r1,4]
+	nop_s
+	sub	r4,r2,r12
+	bic	r4,r4,r2
+	and	r4,r4,r5
+	brne	r4,0,.Lfound0
+	breq	r2,r3,.Lwordloop
+#ifdef	__LITTLE_ENDIAN__
+	xor	r0,r2,r3	; mask for difference
+	sub_s	r1,r0,1
+	bic_s	r0,r0,r1	; mask for least significant difference bit
+	sub	r1,r5,r0
+	xor	r0,r5,r1	; mask for least significant difference byte
+	and_s	r2,r2,r0
+	and_s	r3,r3,r0
+#endif /* LITTLE ENDIAN */
+	cmp_s	r2,r3
+	mov_s	r0,1
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+
+	.balign	4
+#ifdef __LITTLE_ENDIAN__
+.Lfound0:
+	xor	r0,r2,r3	; mask for difference
+	or	r0,r0,r4	; or in zero indicator
+	sub_s	r1,r0,1
+	bic_s	r0,r0,r1	; mask for least significant difference bit
+	sub	r1,r5,r0
+	xor	r0,r5,r1	; mask for least significant difference byte
+	and_s	r2,r2,r0
+	and_s	r3,r3,r0
+	sub.f	r0,r2,r3
+	mov.hi	r0,1
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+#else /* BIG ENDIAN */
+	/* The zero-detection above can mis-detect 0x01 bytes as zeroes
+	   because of carry-propagateion from a lower significant zero byte.
+	   We can compensate for this by checking that bit0 is zero.
+	   This compensation is not necessary in the step where we
+	   get a low estimate for r2, because in any affected bytes
+	   we already have 0x00 or 0x01, which will remain unchanged
+	   when bit 7 is cleared.  */
+	.balign	4
+.Lfound0:
+	lsr	r0,r4,8
+	lsr_s	r1,r2
+	bic_s	r2,r2,r0	; get low estimate for r2 and get ...
+	bic_s	r0,r0,r1	; <this is the adjusted mask for zeros>
+	or_s	r3,r3,r0	; ... high estimate r3 so that r2 > r3 will ...
+	cmp_s	r3,r2		; ... be independent of trailing garbage
+	or_s	r2,r2,r0	; likewise for r3 > r2
+	bic_s	r3,r3,r0
+	rlc	r0,0		; r0 := r2 > r3 ? 1 : 0
+	cmp_s	r2,r3
+	j_s.d	[blink]
+	bset.lo	r0,r0,31
+#endif /* ENDIAN */
+
+	.balign	4
+.Lcharloop:
+	ldb.ab	r2,[r0,1]
+	ldb.ab	r3,[r1,1]
+	nop_s
+	breq	r2,0,.Lcmpend
+	breq	r2,r3,.Lcharloop
+.Lcmpend:
+	j_s.d	[blink]
+	sub	r0,r2,r3
+END_CFI(strcmp)