Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Don't destroy user event fields when removal fails

   User event fields are destroyed before the event is removed from
   visibility. But that can fail leaving the still visible event with no
   fields. Move the destroying of the fields to after the event is
   successfully removed from visibility.

 - Initialize function graph state is fork before calling
   copy_exec_state()

   For non-CLONE_VM forks, copy_exec_state() allocates a new
   task_exec_state. If that allocation fails, ftrace_graph_exit_task()
   will free the tasks ret_stack pointer. Since that pointer is still
   using the parent's ret_stack, it mistakenly frees the parent's
   pointer too.

   Call ftrace_graph_init() on the task first which will NULL out the
   new tasks's ret_stack and if the copy fails, it will not free
   anything.

 - Remove FGRAPH_MAX_INDEX

   The macro FGRAPH_MAX_INDEX was added but never used. Remove it.

 - Save ent_size in function graph printing of nested functions

   The function graph tracer needs to look at the next event to see if
   the next event is the return of the current function entry. If it is,
   it prints a single line:

	ktime_get();

   Otherwise it prints it like a nested function:

	tick_nohz_irq_exit() {
	    ktime_get();
	    kcpustat_irq_exit();
	}

   In order to look at the next event, it must save the current event so
   that it has the information to print from it. It saves the event in
   the iterator descriptor called "ent". What it doesn't save is the
   ent_size of the event which is now used to know if the function graph
   arguments are to be printed. The peek doesn't save the size so the
   size used happens to be that of the size of the last event that was
   seen.

   Save the entry event size in the iterator descriptor so that the
   correct size is used.

 - Fix several errors with freeing data in the histogram code

   The histogram code had a lot of leaked or or incorrect accounting
   when failures happen. Correct them.

 - Fix histogram regression of .percent and .graph modifiers

   Up until 6.3 histogram values could have "percent" or "graph"
   modifiers that changed how they were printed. But a change that added
   restricting histograms values from being strings, stack traces and
   other modifiers inadvertently prevented them from using the percent
   and graph modifiers, which were legal use cases for values.

   Put back the percent and graph modifiers.

 - Fix various typos in the comments

 - Set the trace_clock before initializing a histogram with clock
   argument

   The histogram API allows the user to specific which trace clock to
   use via a "clock=" string. The histogram is set up first before the
   clock is checked. If the passed in clock is not valid, it exits
   without fully fixing up the histogram leaving it on the list and a
   use-after-free can trigger.

   Update the clock argument first and if it fails then exit gracefully
   before the histogram trigger is placed on any lists.

 - Restore :mod: trailer after parsing in ftrace_set_clr_event

   The function ftrace_set_clr_event() modifies the parse string and
   needs to put it back to what was passed in. It searches for ":mod:"
   via a strsep() but fails to put back the first ':' in the string.

   Add back the ':' in the passed in string.

 - Take trace_array reference when opening a tracer options file

   The options files are dynamically created and some tracers add their
   own options. When a tracer adds their own list of options, the
   trace_array holding them has an array to hold the list of options for
   each tracer. This array increases in size via a krealloc(), and the
   new entry gets a newly allocated array to hold the options of the new
   tracer being added.

   The element in each entry of the tracer's option array holds a
   pointer back to the trace_array, a pointer to the tracer it is
   associated to, a pointer to the flags of the option.

   The issue is that these arrays are freed when the trace_array is
   freed when its instance it represents is removed from the instances
   directory. There's a race that an open of one of these options files
   can happen when the instance is being removed.

   Add a new helper function to be called by the open function of the
   options file to iterate all existing trace_arrays under a lock and
   find the one that has the given option element in one of it's tracer
   arrays. If found, then update the associated trace_array's reference
   counter to keep it from being freed. If not found, have the open call
   return -ENODEV.

 - Disable interrupts when acquiring the lock in rb_wake_up_waiters()

   The function rb_wake_up_waiters() assumes it will be called in
   interrupt context and does not disable irqs when taking
   cpu_buffer->reader_lock, which can be called in hard interrupt
   context. The issue is in PREEMPT_RT, this function is called in
   thread context leaving this lock open to a deadlock.

   Take the lock with interrupts disabled.

 - Use rcu_assign_pointer() for tmp_ops filter hash

   The tmp_ops used in update_ftrace_direct_mod() assigns its
   filter_hash field directly, but that field is annotated as __rcu and
   sparse complains. Assign it with rcu_assign_pointer()

 - Fix use-after-free in enable_trigger_private_data_free()

   The trace_event_call is accessed through the event_trigger_data's
   trace_event_file pointer to put the trace_event_call on freeing. The
   issue is that the trace_event_file data may have been freed already
   causing a use-after-free. Add a field to the event_trigger_data that
   points directly to the trace_event_call so that it can decrement its
   reference directly without needing to go through the
   trace_event_file.

 - Fix accounting of buffer data remote headers

   trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
   the number of pages is needed for the asked for size as it doesn't
   take into account the meta data on each page. Add a helper function
   to do the calculation properly and use that in these functions.

 - Catch nr_page_va overflow in ring_buffer_desc sizing

   The number of pages per remote ring buffer is capped by
   ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
   overflow that field would silently allocate a descriptor smaller than
   what was asked for.

 - Do not resize the subbuf order if any per_cpu buffer is disabled

   The mmapping of ring buffers disables resizing the subbuffers, but it
   is done per-cpu whereas the subbuf size change is done for all the
   per_cpu buffers under the buffer->mutex. It could change the size of
   some while the mapping is happening on others. Have the resize of the
   subbuf order check all the per_cpu buffers under the lock to see if
   any of them is disabled before starting and causing an inconsistency
   between buffers that are being mapped.

* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
  ring-buffer: Check resize_disabled before publishing the new subbuf order
  tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
  tracing/remotes: Account for ring buffer page header in size calculation
  tracing: Don't dereference trace_event_file in deferred trigger free
  ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
  ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
  tracing: Take trace_array reference when opening a tracer options file
  tracing: Fix ring_buffer_read_page_size() kernel-doc
  tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
  tracing: Fix memory corruption from a "STACKTRACE" histogram key
  tracing: Fix memory corruption from the histogram stacktrace modifier
  tracing: Undo the registration when enabling the histogram trigger fails
  tracing: Take the reference before publishing the named histogram trigger
  tracing: Set the trace clock before registering the histogram trigger
  tracing: Fix typo "preceeded" in comment
  tracing: Fix typo "availabe" in comment
  tracing: Let histogram values keep the percent and graph modifiers
  tracing: Keep the entry count when the histogram stats allocation fails
  tracing: Free histogram the field rejected for a bad modifier
  tracing: Free histogram the var ref when its initialization fails
  ...

30 files changed, 3370 insertions, 0 deletions

diff --git a/arch/arc/boot/.gitignore b/arch/arc/boot/.gitignore
new file mode 100644
index 000000000..675db1494
--- /dev/null
+++ b/arch/arc/boot/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+uImage
diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile
new file mode 100644
index 000000000..5a8550124
--- /dev/null
+++ b/arch/arc/boot/Makefile
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# uImage build relies on mkimage being available on your host for ARC target
+# You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
+# and make sure it's reachable from your PATH
+
+OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S
+
+LINUX_START_TEXT = $$($(READELF) -h vmlinux | \
+			grep "Entry point address" | grep -o 0x.*)
+
+UIMAGE_LOADADDR    = $(CONFIG_LINUX_LINK_BASE)
+UIMAGE_ENTRYADDR   = $(LINUX_START_TEXT)
+
+targets += vmlinux.bin
+targets += vmlinux.bin.gz
+targets += vmlinux.bin.lzma
+targets += uImage.bin
+targets += uImage.gz
+targets += uImage.lzma
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,gzip)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,uimage,none)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,uimage,gzip)
+
+$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
+	$(call if_changed,uimage,lzma)
diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
new file mode 100644
index 000000000..ee5664f06
--- /dev/null
+++ b/arch/arc/boot/dts/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-y	:= $(addsuffix .dtb, $(CONFIG_BUILTIN_DTB_NAME))
+
+# for CONFIG_OF_ALL_DTBS test
+dtb-	:= $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
+
+# board-specific dtc flags
+DTC_FLAGS_hsdk += --pad 20
diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi
new file mode 100644
index 000000000..41026a3bf
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb100.dtsi
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Abilis Systems TB100 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+
+/ {
+	soc100 {
+		bus-frequency	= <166666666>;
+
+		pll0: oscillator {
+			clock-frequency  = <1000000000>;
+		};
+		cpu_clk: clkdiv_cpu {
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+		ahb_clk: clkdiv_ahb {
+			clock-mult = <1>;
+			clock-div = <6>;
+		};
+
+		iomux: iomux@ff10601c {
+			/* Port 1 */
+			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
+				abilis,function = "mis0";
+			};
+			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
+				abilis,function = "mis1";
+			};
+			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
+				abilis,function = "gpioa";
+			};
+			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
+				abilis,function = "mip1";
+			};
+			/* Port 2 */
+			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
+				abilis,function = "mis2";
+			};
+			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
+				abilis,function = "mis3";
+			};
+			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
+				abilis,function = "gpioc";
+			};
+			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
+				abilis,function = "mip3";
+			};
+			/* Port 3 */
+			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
+				abilis,function = "mis4";
+			};
+			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
+				abilis,function = "mis5";
+			};
+			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
+				abilis,function = "gpioe";
+			};
+			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
+				abilis,function = "mip5";
+			};
+			/* Port 4 */
+			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
+				abilis,function = "mis6";
+			};
+			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
+				abilis,function = "mis7";
+			};
+			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
+				abilis,function = "gpiog";
+			};
+			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
+				abilis,function = "mip7";
+			};
+			/* Port 5 */
+			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
+				abilis,function = "gpioj";
+			};
+			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
+				abilis,function = "gpiok";
+			};
+			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
+				abilis,function = "ciplus";
+			};
+			pctl_mcard: pctl-mcard {       /* M-Card interface */
+				abilis,function = "mcard";
+			};
+			/* Port 6 */
+			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
+				abilis,function = "mop";
+			};
+			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+				abilis,function = "mos0";
+			};
+			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+				abilis,function = "mos1";
+			};
+			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+				abilis,function = "mos2";
+			};
+			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+				abilis,function = "mos3";
+			};
+			/* Port 7 */
+			pctl_uart0: pctl-uart0 {       /* UART 0 */
+				abilis,function = "uart0";
+			};
+			pctl_uart1: pctl-uart1 {       /* UART 1 */
+				abilis,function = "uart1";
+			};
+			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
+				abilis,function = "gpiol";
+			};
+			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
+				abilis,function = "gpiom";
+			};
+			/* Port 8 */
+			pctl_spi3: pctl-spi3 {
+				abilis,function = "spi3";
+			};
+			/* Port 9 */
+			pctl_spi1: pctl-spi1 {
+				abilis,function = "spi1";
+			};
+			pctl_gpio_n: pctl-gpio-n {
+				abilis,function = "gpion";
+			};
+			/* Unmuxed GPIOs */
+			pctl_gpio_b: pctl-gpio-b {
+				abilis,function = "gpiob";
+			};
+			pctl_gpio_d: pctl-gpio-d {
+				abilis,function = "gpiod";
+			};
+			pctl_gpio_f: pctl-gpio-f {
+				abilis,function = "gpiof";
+			};
+			pctl_gpio_h: pctl-gpio-h {
+				abilis,function = "gpioh";
+			};
+			pctl_gpio_i: pctl-gpio-i {
+				abilis,function = "gpioi";
+			};
+		};
+
+		gpioa: gpio@ff140000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff140000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioa";
+		};
+		gpiob: gpio@ff141000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff141000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiob";
+		};
+		gpioc: gpio@ff142000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff142000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioc";
+		};
+		gpiod: gpio@ff143000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff143000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiod";
+		};
+		gpioe: gpio@ff144000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff144000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioe";
+		};
+		gpiof: gpio@ff145000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff145000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiof";
+		};
+		gpiog: gpio@ff146000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff146000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiog";
+		};
+		gpioh: gpio@ff147000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff147000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioh";
+		};
+		gpioi: gpio@ff148000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff148000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <12>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioi";
+		};
+		gpioj: gpio@ff149000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff149000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <32>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioj";
+		};
+		gpiok: gpio@ff14a000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14a000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <22>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiok";
+		};
+		gpiol: gpio@ff14b000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14b000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiol";
+		};
+		gpiom: gpio@ff14c000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14c000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiom";
+		};
+		gpion: gpio@ff14d000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14d000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <5>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpion";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
new file mode 100644
index 000000000..6d346de5e
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Abilis Systems TB100 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb100.dtsi"
+
+/ {
+	model = "abilis,tb100";
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+	};
+
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;	/* 128M */
+	};
+
+	soc100 {
+		uart@ff100000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pctl_uart0>;
+		};
+		ethernet@fe100000 {
+			phy-mode = "rgmii";
+		};
+
+		i2c0: i2c@ff120000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c1: i2c@ff121000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c2: i2c@ff122000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c3: i2c@ff123000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c4: i2c@ff124000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			power {
+				label = "Power";
+				gpios = <&gpioi 0 0>;
+				linux,default-trigger = "default-on";
+			};
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpioi 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			led2 {
+				label = "LED2";
+				gpios = <&gpioi 2 0>;
+				default-state = "off";
+			};
+			led3 {
+				label = "LED3";
+				gpios = <&gpioi 3 0>;
+				default-state = "off";
+			};
+			led4 {
+				label = "LED4";
+				gpios = <&gpioi 4 0>;
+				default-state = "off";
+			};
+			led5 {
+				label = "LED5";
+				gpios = <&gpioi 5 0>;
+				default-state = "off";
+			};
+			led6 {
+				label = "LED6";
+				gpios = <&gpioi 6 0>;
+				default-state = "off";
+			};
+			led7 {
+				label = "LED7";
+				gpios = <&gpioi 7 0>;
+				default-state = "off";
+			};
+			led8 {
+				label = "LED8";
+				gpios = <&gpioi 8 0>;
+				default-state = "off";
+			};
+			led9 {
+				label = "LED9";
+				gpios = <&gpioi 9 0>;
+				default-state = "off";
+			};
+			led10 {
+				label = "LED10";
+				gpios = <&gpioi 10 0>;
+				default-state = "off";
+			};
+			led11 {
+				label = "LED11";
+				gpios = <&gpioi 11 0>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi
new file mode 100644
index 000000000..041ab1ba0
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb101.dtsi
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Abilis Systems TB101 SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+/include/ "abilis_tb10x.dtsi"
+
+
+/ {
+	soc100 {
+		bus-frequency	= <166666666>;
+
+		pll0: oscillator {
+			clock-frequency  = <1000000000>;
+		};
+		cpu_clk: clkdiv_cpu {
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+		ahb_clk: clkdiv_ahb {
+			clock-mult = <1>;
+			clock-div = <6>;
+		};
+
+		iomux: iomux@ff10601c {
+			/* Port 1 */
+			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
+				abilis,function = "mis0";
+			};
+			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
+				abilis,function = "mis1";
+			};
+			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
+				abilis,function = "gpioa";
+			};
+			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
+				abilis,function = "mip1";
+			};
+			/* Port 2 */
+			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
+				abilis,function = "mis2";
+			};
+			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
+				abilis,function = "mis3";
+			};
+			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
+				abilis,function = "gpioc";
+			};
+			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
+				abilis,function = "mip3";
+			};
+			/* Port 3 */
+			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
+				abilis,function = "mis4";
+			};
+			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
+				abilis,function = "mis5";
+			};
+			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
+				abilis,function = "gpioe";
+			};
+			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
+				abilis,function = "mip5";
+			};
+			/* Port 4 */
+			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
+				abilis,function = "mis6";
+			};
+			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
+				abilis,function = "mis7";
+			};
+			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
+				abilis,function = "gpiog";
+			};
+			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
+				abilis,function = "mip7";
+			};
+			/* Port 5 */
+			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
+				abilis,function = "gpioj";
+			};
+			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
+				abilis,function = "gpiok";
+			};
+			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
+				abilis,function = "ciplus";
+			};
+			pctl_mcard: pctl-mcard {       /* M-Card interface */
+				abilis,function = "mcard";
+			};
+			pctl_stc0: pctl-stc0 {         /* Smart card I/F 0 */
+				abilis,function = "stc0";
+			};
+			pctl_stc1: pctl-stc1 {         /* Smart card I/F 1 */
+				abilis,function = "stc1";
+			};
+			/* Port 6 */
+			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
+				abilis,function = "mop";
+			};
+			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
+				abilis,function = "mos0";
+			};
+			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
+				abilis,function = "mos1";
+			};
+			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
+				abilis,function = "mos2";
+			};
+			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
+				abilis,function = "mos3";
+			};
+			/* Port 7 */
+			pctl_uart0: pctl-uart0 {       /* UART 0 */
+				abilis,function = "uart0";
+			};
+			pctl_uart1: pctl-uart1 {       /* UART 1 */
+				abilis,function = "uart1";
+			};
+			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
+				abilis,function = "gpiol";
+			};
+			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
+				abilis,function = "gpiom";
+			};
+			/* Port 8 */
+			pctl_spi3: pctl-spi3 {
+				abilis,function = "spi3";
+			};
+			pctl_jtag: pctl-jtag {
+				abilis,function = "jtag";
+			};
+			/* Port 9 */
+			pctl_spi1: pctl-spi1 {
+				abilis,function = "spi1";
+			};
+			pctl_gpio_n: pctl-gpio-n {
+				abilis,function = "gpion";
+			};
+			/* Unmuxed GPIOs */
+			pctl_gpio_b: pctl-gpio-b {
+				abilis,function = "gpiob";
+			};
+			pctl_gpio_d: pctl-gpio-d {
+				abilis,function = "gpiod";
+			};
+			pctl_gpio_f: pctl-gpio-f {
+				abilis,function = "gpiof";
+			};
+			pctl_gpio_h: pctl-gpio-h {
+				abilis,function = "gpioh";
+			};
+			pctl_gpio_i: pctl-gpio-i {
+				abilis,function = "gpioi";
+			};
+		};
+
+		gpioa: gpio@ff140000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff140000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioa";
+		};
+		gpiob: gpio@ff141000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff141000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiob";
+		};
+		gpioc: gpio@ff142000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff142000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioc";
+		};
+		gpiod: gpio@ff143000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff143000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiod";
+		};
+		gpioe: gpio@ff144000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff144000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioe";
+		};
+		gpiof: gpio@ff145000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff145000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiof";
+		};
+		gpiog: gpio@ff146000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff146000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <3>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiog";
+		};
+		gpioh: gpio@ff147000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff147000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <2>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioh";
+		};
+		gpioi: gpio@ff148000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff148000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <12>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioi";
+		};
+		gpioj: gpio@ff149000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff149000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <32>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpioj";
+		};
+		gpiok: gpio@ff14a000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14a000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <22>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiok";
+		};
+		gpiol: gpio@ff14b000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14b000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiol";
+		};
+		gpiom: gpio@ff14c000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14c000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <4>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpiom";
+		};
+		gpion: gpio@ff14d000 {
+			compatible = "abilis,tb10x-gpio";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <27 2>;
+			reg = <0xff14d000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			abilis,ngpio = <5>;
+			gpio-ranges = <&iomux 0 0 0>;
+			gpio-ranges-group-names = "gpion";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
new file mode 100644
index 000000000..d11b790f8
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Abilis Systems TB101 Development Kit PCB device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+/dts-v1/;
+
+/include/ "abilis_tb101.dtsi"
+
+/ {
+	model = "abilis,tb101";
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
+	};
+
+	aliases { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x08000000>;	/* 128M */
+	};
+
+	soc100 {
+		uart@ff100000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pctl_uart0>;
+		};
+		ethernet@fe100000 {
+			phy-mode = "rgmii";
+		};
+
+		i2c0: i2c@ff120000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c1: i2c@ff121000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c2: i2c@ff122000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c3: i2c@ff123000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+		i2c4: i2c@ff124000 {
+			i2c-sda-hold-time-ns = <432>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			power {
+				label = "Power";
+				gpios = <&gpioi 0 0>;
+				linux,default-trigger = "default-on";
+			};
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&gpioi 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			led2 {
+				label = "LED2";
+				gpios = <&gpioi 2 0>;
+				default-state = "off";
+			};
+			led3 {
+				label = "LED3";
+				gpios = <&gpioi 3 0>;
+				default-state = "off";
+			};
+			led4 {
+				label = "LED4";
+				gpios = <&gpioi 4 0>;
+				default-state = "off";
+			};
+			led5 {
+				label = "LED5";
+				gpios = <&gpioi 5 0>;
+				default-state = "off";
+			};
+			led6 {
+				label = "LED6";
+				gpios = <&gpioi 6 0>;
+				default-state = "off";
+			};
+			led7 {
+				label = "LED7";
+				gpios = <&gpioi 7 0>;
+				default-state = "off";
+			};
+			led8 {
+				label = "LED8";
+				gpios = <&gpioi 8 0>;
+				default-state = "off";
+			};
+			led9 {
+				label = "LED9";
+				gpios = <&gpioi 9 0>;
+				default-state = "off";
+			};
+			led10 {
+				label = "LED10";
+				gpios = <&gpioi 10 0>;
+				default-state = "off";
+			};
+			led11 {
+				label = "LED11";
+				gpios = <&gpioi 11 0>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
new file mode 100644
index 000000000..aa62619f2
--- /dev/null
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Abilis Systems TB10X SOC device tree
+ *
+ * Copyright (C) Abilis Systems 2013
+ *
+ * Author: Christian Ruppert <christian.ruppert@abilis.com>
+ */
+
+
+/ {
+	compatible		= "abilis,arc-tb10x";
+	#address-cells		= <1>;
+	#size-cells		= <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,arc770d";
+			reg = <0>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <3>;
+		interrupt-parent = <&intc>;
+		clocks = <&cpu_clk>;
+	};
+
+	/* TIMER1 for free running clocksource */
+	timer1 {
+		compatible = "snps,arc-timer";
+		clocks = <&cpu_clk>;
+	};
+
+	soc100 {
+		#address-cells	= <1>;
+		#size-cells	= <1>;
+		device_type	= "soc";
+		ranges		= <0xfe000000 0xfe000000 0x02000000
+				0x000f0000 0x000f0000 0x00010000>;
+		compatible	= "abilis,tb10x", "simple-bus";
+
+		pll0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "pll0";
+		};
+		cpu_clk: clkdiv_cpu {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&pll0>;
+			clock-output-names = "cpu_clk";
+		};
+		ahb_clk: clkdiv_ahb {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&pll0>;
+			clock-output-names = "ahb_clk";
+		};
+
+		iomux: iomux@ff10601c {
+			compatible = "abilis,tb10x-iomux";
+			#gpio-range-cells = <3>;
+			reg = <0xff10601c 0x4>;
+		};
+
+		intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+		tb10x_ictl: pic@fe002000 {
+			compatible = "abilis,tb10x-ictl";
+			reg = <0xfe002000 0x20>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
+					20 21 22 23 24 25 26 27 28 29 30 31>;
+		};
+
+		uart@ff100000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xff100000 0x100>;
+			clock-frequency = <166666666>;
+			interrupts = <25 8>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupt-parent = <&tb10x_ictl>;
+		};
+		ethernet@fe100000 {
+			compatible = "snps,dwmac-3.70a","snps,dwmac";
+			reg = <0xfe100000 0x1058>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <6 8>;
+			interrupt-names = "macirq";
+			clocks = <&ahb_clk>;
+			clock-names = "stmmaceth";
+		};
+		dma@fe000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xfe000000 0x400>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <14 8>;
+			dma-channels = <6>;
+			dma-requests = <0>;
+			dma-masters = <1>;
+			#dma-cells = <3>;
+			chan_allocation_order = <0>;
+			chan_priority = <1>;
+			block_size = <0x7ff>;
+			data-width = <4>;
+			clocks = <&ahb_clk>;
+			clock-names = "hclk";
+			multi-block = <1 1 1 1 1 1>;
+		};
+
+		i2c0: i2c@ff120000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xff120000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c1: i2c@ff121000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xff121000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c2: i2c@ff122000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xff122000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c3: i2c@ff123000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xff123000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+		i2c4: i2c@ff124000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xff124000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <12 8>;
+			clocks = <&ahb_clk>;
+		};
+
+		spi0: spi@fe010000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "abilis,tb100-spi";
+			num-cs = <1>;
+			reg = <0xfe010000 0x20>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <26 8>;
+			clocks = <&ahb_clk>;
+		};
+		spi1: spi@fe011000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "abilis,tb100-spi";
+			num-cs = <2>;
+			reg = <0xfe011000 0x20>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <10 8>;
+			clocks = <&ahb_clk>;
+		};
+
+		tb10x_tsm: tb10x-tsm@ff316000 {
+			compatible = "abilis,tb100-tsm";
+			reg = <0xff316000 0x400>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <17 8>;
+			output-clkdiv = <4>;
+			global-packet-delay = <0x21>;
+			port-packet-delay = <0>;
+		};
+		tb10x_stream_proc: tb10x-stream-proc {
+			compatible = "abilis,tb100-streamproc";
+			reg =   <0xfff00000 0x200>,
+				<0x000f0000 0x10000>,
+				<0xfff00200 0x105>,
+				<0xff10600c 0x1>,
+				<0xfe001018 0x1>;
+			reg-names =     "mbox",
+					"sp_iccm",
+					"mbox_irq",
+					"cpuctrl",
+					"a6it_int_force";
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <20 2>, <19 2>;
+			interrupt-names = "cmd_irq", "event_irq";
+		};
+		tb10x_mdsc0: tb10x-mdscr@ff300000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xff300000 0x7000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_mscr0: tb10x-mdscr@ff307000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xff307000 0x7000>;
+		};
+		tb10x_scr0: tb10x-mdscr@ff30e000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xff30e000 0x4000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_scr1: tb10x-mdscr@ff312000 {
+			compatible = "abilis,tb100-mdscr";
+			reg = <0xff312000 0x4000>;
+			tb100-mdscr-manage-tsin;
+		};
+		tb10x_wfb: tb10x-wfb@ff319000 {
+			compatible = "abilis,tb100-wfb";
+			reg = <0xff319000 0x1000>;
+			interrupt-parent = <&tb10x_ictl>;
+			interrupts = <16 8>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
new file mode 100644
index 000000000..88bcc7ab6
--- /dev/null
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device tree for AXC001 770D/EM6/AS221 CPU card
+ * Note that this file only supports the 770D CPU
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <750000000>;
+		};
+
+		input_clk: input-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <33333333>;
+		};
+
+		core_intc: arc700-intc@cpu {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		/*
+		 * this GPIO block ORs all interrupts on CPU card (creg,..)
+		 * to uplink only 1 IRQ to ARC core intc
+		 */
+		dw-apb-gpio@2000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = < 0x2000 0x80 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ictl_intc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <30>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&core_intc>;
+				interrupts = <15>;
+			};
+		};
+
+		debug_uart: dw-apb-uart@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <33333000>;
+			interrupt-parent = <&ictl_intc>;
+			interrupts = <19 4>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
+	};
+
+	/*
+	 * This INTC is actually connected to DW APB GPIO
+	 * which acts as a wire between MB INTC and CPU INTC.
+	 * GPIO INTC is configured in platform init code
+	 * and here we mimic direct connection from MB INTC to
+	 * CPU INTC, thus we set "interrupts = <7>" instead of
+	 * "interrupts = <12>"
+	 *
+	 * This intc actually resides on MB, but we move it here to
+	 * avoid duplicating the MB dtsi file given that IRQ from
+	 * this intc to cpu intc are different for axs101 and axs103
+	 */
+	mb_intc: interrupt-controller@e0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&core_intc>;
+		interrupts = < 7 >;
+	};
+
+	memory {
+		device_type = "memory";
+		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x1b000000>;	/* (512 - 32) MiB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/*
+		 * We just move frame buffer area to the very end of
+		 * available DDR. And even though in case of ARC770 there's
+		 * no strict requirement for a frame-buffer to be in any
+		 * particular location it allows us to use the same
+		 * base board's DT node for ARC PGU as for ARc HS38.
+		 */
+		frame_buffer: frame_buffer@9e000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9e000000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
new file mode 100644
index 000000000..9a2dc39a5
--- /dev/null
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device tree for AXC003 CPU card: HS38x UP configuration
+ */
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
+
+		input_clk: input-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <33333333>;
+		};
+
+		core_clk: core-clk@80 {
+			compatible = "snps,axs10x-arc-pll-clock";
+			reg = <0x80 0x10>, <0x100 0x10>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 90MHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <90000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		/*
+		 * this GPIO block ORs all interrupts on CPU card (creg,..)
+		 * to uplink only 1 IRQ to ARC core intc
+		 */
+		dw-apb-gpio@2000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = < 0x2000 0x80 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ictl_intc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <30>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&core_intc>;
+				interrupts = <25>;
+			};
+		};
+
+		debug_uart: dw-apb-uart@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <33333000>;
+			interrupt-parent = <&ictl_intc>;
+			interrupts = <2 4>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupt-parent = <&core_intc>;
+			interrupts = <20>;
+		};
+	};
+
+	/*
+	 * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+	 * it via overlay because peripherals defined in axs10x_mb.dtsi are
+	 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+	 * only AXS103 board has HW-coherent DMA peripherals)
+	 * We don't need to mark pgu@17000 as dma-coherent because it uses
+	 * external DMA buffer located outside of IOC aperture.
+	 */
+	axs10x_mb {
+		ethernet@18000 {
+			dma-coherent;
+		};
+
+		usb@40000 {
+			dma-coherent;
+		};
+
+		usb@60000 {
+			dma-coherent;
+		};
+
+		mmc@15000 {
+			dma-coherent;
+		};
+	};
+
+	/*
+	 * The DW APB ICTL intc on MB is connected to CPU intc via a
+	 * DT "invisible" DW APB GPIO block, configured to simply pass thru
+	 * interrupts - setup accordingly in platform init (plat-axs10x/ax10x.c)
+	 *
+	 * So here we mimic a direct connection between them, ignoring the
+	 * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
+	 * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
+	 *
+	 * This intc actually resides on MB, but we move it here to
+	 * avoid duplicating the MB dtsi file given that IRQ from
+	 * this intc to cpu intc are different for axs101 and axs103
+	 */
+	mb_intc: interrupt-controller@e0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&core_intc>;
+		interrupts = < 24 >;
+	};
+
+	memory {
+		device_type = "memory";
+		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MiB low mem */
+		       0x1 0xc0000000 0x0 0x40000000>;	/* 1 GiB highmem */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/*
+		 * Move frame buffer out of IOC aperture (0x8z-0xaz).
+		 */
+		frame_buffer: frame_buffer@be000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xbe000000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
new file mode 100644
index 000000000..f31382cb8
--- /dev/null
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc
+ */
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
+
+		input_clk: input-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <33333333>;
+		};
+
+		core_clk: core-clk@80 {
+			compatible = "snps,axs10x-arc-pll-clock";
+			reg = <0x80 0x10>, <0x100 0x10>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 100MHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <100000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+			#interrupt-cells = <1>;
+		};
+
+		/*
+		 * this GPIO block ORs all interrupts on CPU card (creg,..)
+		 * to uplink only 1 IRQ to ARC core intc
+		 */
+		dw-apb-gpio@2000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = < 0x2000 0x80 >;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ictl_intc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <30>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&idu_intc>;
+				interrupts = <1>;
+			};
+		};
+
+		debug_uart: dw-apb-uart@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <33333000>;
+			interrupt-parent = <&ictl_intc>;
+			interrupts = <2 4>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupt-parent = <&core_intc>;
+			interrupts = <20>;
+		};
+	};
+
+	/*
+	 * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+	 * it via overlay because peripherals defined in axs10x_mb.dtsi are
+	 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+	 * only AXS103 board has HW-coherent DMA peripherals)
+	 * We don't need to mark pgu@17000 as dma-coherent because it uses
+	 * external DMA buffer located outside of IOC aperture.
+	 */
+	axs10x_mb {
+		ethernet@18000 {
+			dma-coherent;
+		};
+
+		usb@40000 {
+			dma-coherent;
+		};
+
+		usb@60000 {
+			dma-coherent;
+		};
+
+		mmc@15000 {
+			dma-coherent;
+		};
+	};
+
+	/*
+	 * This INTC is actually connected to DW APB GPIO
+	 * which acts as a wire between MB INTC and CPU INTC.
+	 * GPIO INTC is configured in platform init code
+	 * and here we mimic direct connection from MB INTC to
+	 * CPU INTC, thus we set "interrupts = <0 1>" instead of
+	 * "interrupts = <12>"
+	 *
+	 * This intc actually resides on MB, but we move it here to
+	 * avoid duplicating the MB dtsi file given that IRQ from
+	 * this intc to cpu intc are different for axs101 and axs103
+	 */
+	mb_intc: interrupt-controller@e0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0x0 0xe0012000 0x0 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&idu_intc>;
+		interrupts = <0>;
+	};
+
+	memory {
+		device_type = "memory";
+		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MiB low mem */
+		       0x1 0xc0000000 0x0 0x40000000>;	/* 1 GiB highmem */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/*
+		 * Move frame buffer out of IOC aperture (0x8z-0xaz).
+		 */
+		frame_buffer: frame_buffer@be000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xbe000000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/axs101.dts b/arch/arc/boot/dts/axs101.dts
new file mode 100644
index 000000000..c4cfc5f4f
--- /dev/null
+++ b/arch/arc/boot/dts/axs101.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ *
+ * ARC AXS101 S/W development platform
+ */
+/dts-v1/;
+
+/include/ "axc001.dtsi"
+/include/ "axs10x_mb.dtsi"
+
+/ {
+	model = "snps,axs101";
+	compatible = "snps,axs101", "snps,arc-sdp";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 print-fatal-signals=1";
+	};
+};
diff --git a/arch/arc/boot/dts/axs103.dts b/arch/arc/boot/dts/axs103.dts
new file mode 100644
index 000000000..16ccb7ba7
--- /dev/null
+++ b/arch/arc/boot/dts/axs103.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device Tree for AXS103 SDP with AXS10X Main Board and
+ * AXC003 FPGA Card (with UP bitfile)
+ */
+/dts-v1/;
+
+/include/ "axc003.dtsi"
+/include/ "axs10x_mb.dtsi"
+
+/ {
+	model = "snps,axs103";
+	compatible = "snps,axs103", "snps,arc-sdp";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8 debug print-fatal-signals=1";
+	};
+};
diff --git a/arch/arc/boot/dts/axs103_idu.dts b/arch/arc/boot/dts/axs103_idu.dts
new file mode 100644
index 000000000..a934b92a8
--- /dev/null
+++ b/arch/arc/boot/dts/axs103_idu.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device Tree for AXS103 SDP with AXS10X Main Board and
+ * AXC003 FPGA Card (with SMP bitfile)
+ */
+/dts-v1/;
+
+/include/ "axc003_idu.dtsi"
+/include/ "axs10x_mb.dtsi"
+
+/ {
+	model = "snps,axs103-smp";
+	compatible = "snps,axs103", "snps,arc-sdp";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0";
+	};
+};
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
new file mode 100644
index 000000000..3add2fe25
--- /dev/null
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for peripherals on the AXS10x mainboard
+ *
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/ {
+	aliases {
+		ethernet = &gmac;
+	};
+
+	axs10x_mb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x0 0xe0000000 0x10000000>;
+		interrupt-parent = <&mb_intc>;
+
+		creg_rst: reset-controller@11220 {
+			compatible = "snps,axs10x-reset";
+			#reset-cells = <1>;
+			reg = <0x11220 0x4>;
+		};
+
+		i2sclk: i2sclk@100a0 {
+			compatible = "snps,axs10x-i2s-pll-clock";
+			reg = <0x100a0 0x10>;
+			clocks = <&i2spll_clk>;
+			#clock-cells = <0>;
+		};
+
+		clocks {
+			i2spll_clk: i2spll_clk {
+				compatible = "fixed-clock";
+				clock-frequency = <27000000>;
+				#clock-cells = <0>;
+			};
+
+			i2cclk: i2cclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			apbclk: apbclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			mmcclk: mmcclk {
+				compatible = "fixed-clock";
+				/*
+				 * DW sdio controller has external ciu clock divider
+				 * controlled via register in SDIO IP. It divides
+				 * sdio_ref_clk (which comes from CGU) by 16 for
+				 * default. So default mmcclk clock (which comes
+				 * to sdk_in) is 25000000 Hz.
+				 */
+				clock-frequency = <25000000>;
+				#clock-cells = <0>;
+			};
+		};
+
+		pguclk: pguclk@10080 {
+			compatible = "snps,axs10x-pgu-pll-clock";
+			reg = <0x10080 0x10>, <0x110 0x10>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
+		};
+
+		gmac: ethernet@18000 {
+			#interrupt-cells = <1>;
+			compatible = "snps,dwmac";
+			reg = < 0x18000 0x2000 >;
+			interrupts = < 4 >;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			snps,pbl = < 32 >;
+			snps,multicast-filter-bins = <256>;
+			clocks = <&apbclk>;
+			clock-names = "stmmaceth";
+			max-speed = <100>;
+			resets = <&creg_rst 5>;
+			reset-names = "stmmaceth";
+			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
+		};
+
+		usb@40000 {
+			compatible = "generic-ehci";
+			reg = < 0x40000 0x100 >;
+			interrupts = < 8 >;
+		};
+
+		usb@60000 {
+			compatible = "generic-ohci";
+			reg = < 0x60000 0x100 >;
+			interrupts = < 8 >;
+		};
+
+		/*
+		 * According to DW Mobile Storage databook it is required
+		 * to use  "Hold Register" if card is enumerated in SDR12 or
+		 * SDR25 modes.
+		 *
+		 * Utilization of "Hold Register" is already implemented via
+		 * dw_mci_pltfm_prepare_command() which in its turn gets
+		 * used through dw_mci_drv_data->prepare_command call-back.
+		 * This call-back is used in Altera Socfpga platform and so
+		 * we may reuse it saying that we're compatible with their
+		 * "altr,socfpga-dw-mshc".
+		 *
+		 * Most probably "Hold Register" utilization is platform-
+		 * independent requirement which means that single unified
+		 * "snps,dw-mshc" should be enough for all users of DW MMC once
+		 * dw_mci_pltfm_prepare_command() is used in generic platform
+		 * code.
+		 */
+		mmc@15000 {
+			compatible = "altr,socfpga-dw-mshc";
+			reg = < 0x15000 0x400 >;
+			fifo-depth = < 16 >;
+			card-detect-delay = < 200 >;
+			clocks = <&apbclk>, <&mmcclk>;
+			clock-names = "biu", "ciu";
+			interrupts = < 7 >;
+			bus-width = < 4 >;
+		};
+
+		uart@20000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20000 0x100>;
+			clock-frequency = <33333333>;
+			interrupts = <17>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart@21000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x21000 0x100>;
+			clock-frequency = <33333333>;
+			interrupts = <18>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		/* UART muxed with USB data port (ttyS3) */
+		uart@22000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x22000 0x100>;
+			clock-frequency = <33333333>;
+			interrupts = <19>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		i2c@1d000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x1d000 0x100>;
+			clock-frequency = <400000>;
+			clocks = <&i2cclk>;
+			interrupts = <14>;
+		};
+
+		i2s: i2s@1e000 {
+			compatible = "snps,designware-i2s";
+			reg = <0x1e000 0x100>;
+			clocks = <&i2sclk 0>;
+			clock-names = "i2sclk";
+			interrupts = <15>;
+			#sound-dai-cells = <0>;
+		};
+
+		i2c@1f000 {
+			compatible = "snps,designware-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1f000 0x100>;
+			clock-frequency = <400000>;
+			clocks = <&i2cclk>;
+			interrupts = <16>;
+
+			adv7511:adv7511@39{
+				compatible="adi,adv7511";
+				reg = <0x39>;
+				interrupts = <23>;
+				adi,input-depth = <8>;
+				adi,input-colorspace = "rgb";
+				adi,input-clock = "1x";
+				adi,clock-delay = <0x03>;
+				#sound-dai-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* RGB/YUV input */
+					port@0 {
+						reg = <0>;
+						adv7511_input:endpoint {
+						remote-endpoint = <&pgu_output>;
+						};
+					};
+
+					/* HDMI output */
+					port@1 {
+						reg = <1>;
+						adv7511_output: endpoint {
+							remote-endpoint = <&hdmi_connector_in>;
+						};
+					};
+				};
+			};
+
+			eeprom@54{
+				compatible = "atmel,24c01";
+				reg = <0x54>;
+				pagesize = <0x8>;
+			};
+
+			eeprom@57{
+				compatible = "atmel,24c04";
+				reg = <0x57>;
+				pagesize = <0x8>;
+			};
+		};
+
+		hdmi0: connector {
+			compatible = "hdmi-connector";
+			type = "a";
+			port {
+				hdmi_connector_in: endpoint {
+					remote-endpoint = <&adv7511_output>;
+				};
+			};
+		};
+
+		gpio0:gpio@13000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x13000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio0_banka: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+			};
+
+			gpio0_bankb: gpio-controller@1 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+				reg = <1>;
+			};
+
+			gpio0_bankc: gpio-controller@2 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+				reg = <2>;
+			};
+		};
+
+		gpio1:gpio@14000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x14000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio1_banka: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <30>;
+				reg = <0>;
+			};
+
+			gpio1_bankb: gpio-controller@1 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <10>;
+				reg = <1>;
+			};
+
+			gpio1_bankc: gpio-controller@2 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+				reg = <2>;
+			};
+		};
+
+		pgu@17000 {
+			compatible = "snps,arcpgu";
+			reg = <0x17000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+			memory-region = <&frame_buffer>;
+			port {
+				pgu_output: endpoint {
+					remote-endpoint = <&adv7511_input>;
+				};
+			};
+		};
+
+		sound_playback {
+			compatible = "simple-audio-card";
+			simple-audio-card,name = "AXS10x HDMI Audio";
+			simple-audio-card,format = "i2s";
+			simple-audio-card,cpu {
+				sound-dai = <&i2s>;
+			};
+			simple-audio-card,codec {
+				sound-dai = <&adv7511>;
+			};
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/haps_hs.dts b/arch/arc/boot/dts/haps_hs.dts
new file mode 100644
index 000000000..76ad527a0
--- /dev/null
+++ b/arch/arc/boot/dts/haps_hs.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	model = "snps,zebu_hs";
+	compatible = "snps,zebu_hs";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&core_intc>;
+
+	memory {
+		device_type = "memory";
+		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x40000000	/* 1 GB low mem */
+		       0x1 0x00000000 0x0 0x40000000>;	/* 1 GB highmem */
+	};
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* only perip space at end of low mem accessible
+			  bus addr,  parent bus addr, size    */
+		ranges = <0x80000000 0x0 0x80000000 0x80000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns16550a";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <24>;
+			clock-frequency = <50000000>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+
+		virtio0: virtio@f0100000 {
+			compatible = "virtio,mmio";
+			reg = <0xf0100000 0x2000>;
+			interrupts = <31>;
+		};
+
+		virtio1: virtio@f0102000 {
+			compatible = "virtio,mmio";
+			reg = <0xf0102000 0x2000>;
+			interrupts = <32>;
+		};
+
+		virtio2: virtio@f0104000 {
+			compatible = "virtio,mmio";
+			reg = <0xf0104000 0x2000>;
+			interrupts = <33>;
+		};
+
+		virtio3: virtio@f0106000 {
+			compatible = "virtio,mmio";
+			reg = <0xf0106000 0x2000>;
+			interrupts = <34>;
+		};
+
+		virtio4: virtio@f0108000 {
+			compatible = "virtio,mmio";
+			reg = <0xf0108000 0x2000>;
+			interrupts = <35>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/haps_hs_idu.dts b/arch/arc/boot/dts/haps_hs_idu.dts
new file mode 100644
index 000000000..738c76cd0
--- /dev/null
+++ b/arch/arc/boot/dts/haps_hs_idu.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	model = "snps,zebu_hs-smp";
+	compatible = "snps,zebu_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512 */
+	};
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;	/* 50 MHZ */
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns16550a";
+			reg = <0xf0000000 0x2000>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <0>;
+			clock-frequency = <50000000>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
new file mode 100644
index 000000000..98bb85072
--- /dev/null
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device Tree for ARC HS Development Kit
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/snps,hsdk-reset.h>
+
+/ {
+	model = "snps,hsdk";
+	compatible = "snps,hsdk";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
+	};
+
+	aliases {
+		ethernet = &gmac;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <0>;
+			clocks = <&core_clk>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <1>;
+			clocks = <&core_clk>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <2>;
+			clocks = <&core_clk>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <3>;
+			clocks = <&core_clk>;
+		};
+	};
+
+	input_clk: input-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <33333333>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "5v0-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	cpu_intc: cpu-interrupt-controller {
+		compatible = "snps,archs-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	idu_intc: idu-interrupt-controller {
+		compatible = "snps,archs-idu-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&cpu_intc>;
+	};
+
+	arcpct: pct {
+		compatible = "snps,archs-pct";
+		interrupt-parent = <&cpu_intc>;
+		interrupts = <20>;
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer {
+		compatible = "snps,arc-timer";
+		interrupts = <16>;
+		interrupt-parent = <&cpu_intc>;
+		clocks = <&core_clk>;
+	};
+
+	/* 64-bit Global Free Running Counter */
+	gfrc {
+		compatible = "snps,archs-timer-gfrc";
+		clocks = <&core_clk>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&idu_intc>;
+
+		ranges = <0x00000000 0x0 0xf0000000 0x10000000>;
+
+		cgu_rst: reset-controller@8a0 {
+			compatible = "snps,hsdk-reset";
+			#reset-cells = <1>;
+			reg = <0x8a0 0x4>, <0xff0 0x4>;
+		};
+
+		core_clk: core-clk@0 {
+			compatible = "snps,hsdk-core-pll-clock";
+			reg = <0x00 0x10>, <0x14b8 0x4>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
+
+			/*
+			 * Set initial core pll output frequency to 1GHz.
+			 * It will be applied at the core pll driver probing
+			 * on early boot.
+			 */
+			assigned-clocks = <&core_clk>;
+			assigned-clock-rates = <1000000000>;
+		};
+
+		serial: serial@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <33330000>;
+			interrupts = <6>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		gmacclk: gmacclk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		mmcclk_ciu: mmcclk-ciu {
+			compatible = "fixed-clock";
+			/*
+			 * DW sdio controller has external ciu clock divider
+			 * controlled via register in SDIO IP. Due to its
+			 * unexpected default value (it should divide by 1
+			 * but it divides by 8) SDIO IP uses wrong clock and
+			 * works unstable (see STAR 9001204800)
+			 * We switched to the minimum possible value of the
+			 * divisor (div-by-2) in HSDK platform code.
+			 * So add temporary fix and change clock frequency
+			 * to 50000000 Hz until we fix dw sdio driver itself.
+			 */
+			clock-frequency = <50000000>;
+			#clock-cells = <0>;
+		};
+
+		mmcclk_biu: mmcclk-biu {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		gpu_core_clk: gpu-core-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		gpu_dma_clk: gpu-dma-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		gpu_cfg_clk: gpu-cfg-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			#clock-cells = <0>;
+		};
+
+		dmac_core_clk: dmac-core-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		dmac_cfg_clk: dmac-gpu-cfg-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			#clock-cells = <0>;
+		};
+
+		gmac: ethernet@8000 {
+			compatible = "snps,dwmac";
+			reg = <0x8000 0x2000>;
+			interrupts = <10>;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii-id";
+			snps,pbl = <32>;
+			snps,multicast-filter-bins = <256>;
+			clocks = <&gmacclk>;
+			clock-names = "stmmaceth";
+			phy-handle = <&phy0>;
+			resets = <&cgu_rst HSDK_ETH_RESET>;
+			reset-names = "stmmaceth";
+			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
+			dma-coherent;
+
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+				phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
+					reg = <0>;
+				};
+			};
+		};
+
+		usb@60000 {
+			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
+			reg = <0x60000 0x100>;
+			interrupts = <15>;
+			resets = <&cgu_rst HSDK_USB_RESET>;
+			dma-coherent;
+		};
+
+		usb@40000 {
+			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
+			reg = <0x40000 0x100>;
+			interrupts = <15>;
+			resets = <&cgu_rst HSDK_USB_RESET>;
+			dma-coherent;
+		};
+
+		mmc@a000 {
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xa000 0x400>;
+			num-slots = <1>;
+			fifo-depth = <16>;
+			card-detect-delay = <200>;
+			clocks = <&mmcclk_biu>, <&mmcclk_ciu>;
+			clock-names = "biu", "ciu";
+			interrupts = <12>;
+			bus-width = <4>;
+			dma-coherent;
+		};
+
+		spi0: spi@20000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x20000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <16>;
+			num-cs = <2>;
+			reg-io-width = <4>;
+			clocks = <&input_clk>;
+			cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
+				   <&creg_gpio 1 GPIO_ACTIVE_LOW>;
+
+			flash@0 {
+				compatible = "sst26wf016b", "jedec,spi-nor";
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				spi-max-frequency = <4000000>;
+			};
+
+			adc@1 {
+				compatible = "ti,adc108s102";
+				reg = <1>;
+				vref-supply = <&reg_5v0>;
+				spi-max-frequency = <1000000>;
+			};
+		};
+
+		creg_gpio: gpio@14b0 {
+			compatible = "snps,creg-gpio-hsdk";
+			reg = <0x14b0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <2>;
+		};
+
+		gpio: gpio@3000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio_port_a: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <24>;
+				reg = <0>;
+			};
+		};
+
+		gpu_3d: gpu@90000 {
+			compatible = "vivante,gc";
+			reg = <0x90000 0x4000>;
+			clocks = <&gpu_dma_clk>,
+				 <&gpu_cfg_clk>,
+				 <&gpu_core_clk>,
+				 <&gpu_core_clk>;
+			clock-names = "bus", "reg", "core", "shader";
+			interrupts = <28>;
+		};
+
+		dmac: dmac@80000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x80000 0x400>;
+			interrupts = <27>;
+			clocks = <&dmac_core_clk>, <&dmac_cfg_clk>;
+			clock-names = "core-clk", "cfgr-clk";
+
+			dma-channels = <4>;
+			snps,dma-masters = <2>;
+			snps,data-width = <3>;
+			snps,block-size = <4096 4096 4096 4096>;
+			snps,priority = <0 1 2 3>;
+			snps,axi-max-burst-len = <16>;
+		};
+	};
+
+	memory@80000000 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;  /* 1 GB lowmem */
+		/*     0x1 0x00000000 0x0 0x40000000>;     1 GB highmem */
+	};
+};
diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts
new file mode 100644
index 000000000..f8832a15e
--- /dev/null
+++ b/arch/arc/boot/dts/nsim_700.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "snps,nsim";
+	compatible = "snps,nsim";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <80000000>;
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns16550a";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <24>;
+			clock-frequency = <50000000>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts
new file mode 100644
index 000000000..fc207c4a4
--- /dev/null
+++ b/arch/arc/boot/dts/nsimosci.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "snps,nsimosci";
+	compatible = "snps,nsimosci";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		/* this is for console on PGU */
+		/* bootargs = "console=tty0 consoleblank=0"; */
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <20000000>;
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,arc700-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns8250";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <11>;
+			clock-frequency = <3686400>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
+			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+		ps2: ps2@f9001000 {
+			compatible = "snps,arc_ps2";
+			reg = <0xf9000400 0x14>;
+			interrupts = <13>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		eth0: ethernet@f0003000 {
+			compatible = "ezchip,nps-mgt-enet";
+			reg = <0xf0003000 0x44>;
+			interrupts = <7>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/nsimosci_hs.dts b/arch/arc/boot/dts/nsimosci_hs.dts
new file mode 100644
index 000000000..71f1f8416
--- /dev/null
+++ b/arch/arc/boot/dts/nsimosci_hs.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	model = "snps,nsimosci_hs";
+	compatible = "snps,nsimosci_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		/* this is for console on PGU */
+		/* bootargs = "console=tty0 consoleblank=0"; */
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <20000000>;
+		};
+
+		core_intc: core-interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns8250";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <24>;
+			clock-frequency = <3686400>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
+			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+		ps2: ps2@f9001000 {
+			compatible = "snps,arc_ps2";
+			reg = <0xf9000400 0x14>;
+			interrupts = <27>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		eth0: ethernet@f0003000 {
+			compatible = "ezchip,nps-mgt-enet";
+			reg = <0xf0003000 0x44>;
+			interrupts = <25>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/nsimosci_hs_idu.dts b/arch/arc/boot/dts/nsimosci_hs_idu.dts
new file mode 100644
index 000000000..69d794c59
--- /dev/null
+++ b/arch/arc/boot/dts/nsimosci_hs_idu.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	model = "snps,nsimosci_hs-smp";
+	compatible = "snps,nsimosci_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	chosen {
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24 print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <5000000>;
+		};
+
+		core_intc: core-interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns8250";
+			reg = <0xf0000000 0x2000>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <0>;
+			clock-frequency = <3686400>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
+			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+		ps2: ps2@f9001000 {
+			compatible = "snps,arc_ps2";
+			reg = <0xf9000400 0x14>;
+			interrupts = <3>;
+			interrupt-parent = <&idu_intc>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		eth0: ethernet@f0003000 {
+			compatible = "ezchip,nps-mgt-enet";
+			reg = <0xf0003000 0x44>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/skeleton.dtsi b/arch/arc/boot/dts/skeleton.dtsi
new file mode 100644
index 000000000..ba86b8036
--- /dev/null
+++ b/arch/arc/boot/dts/skeleton.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value.
+ */
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,arc770d";
+			reg = <0>;
+			clocks = <&core_clk>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <3>;
+		interrupt-parent = <&core_intc>;
+		clocks = <&core_clk>;
+	};
+
+	/* TIMER1 for free running clocksource */
+	timer1 {
+		compatible = "snps,arc-timer";
+		clocks = <&core_clk>;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256M */
+	};
+};
diff --git a/arch/arc/boot/dts/skeleton_hs.dtsi b/arch/arc/boot/dts/skeleton_hs.dtsi
new file mode 100644
index 000000000..8fb49890e
--- /dev/null
+++ b/arch/arc/boot/dts/skeleton_hs.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <0>;
+			clocks = <&core_clk>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <16>;
+		interrupt-parent = <&core_intc>;
+		clocks = <&core_clk>;
+	};
+
+	/* 64-bit Local RTC: preferred clocksource for UP */
+	rtc {
+		compatible = "snps,archs-timer-rtc";
+		clocks = <&core_clk>;
+	};
+
+	/* TIMER1 for free running clocksource: Fallback if rtc not found */
+	timer1 {
+		compatible = "snps,arc-timer";
+		clocks = <&core_clk>;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256M */
+	};
+};
diff --git a/arch/arc/boot/dts/skeleton_hs_idu.dtsi b/arch/arc/boot/dts/skeleton_hs_idu.dtsi
new file mode 100644
index 000000000..75f5c9ecb
--- /dev/null
+++ b/arch/arc/boot/dts/skeleton_hs_idu.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <0>;
+			clocks = <&core_clk>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <1>;
+			clocks = <&core_clk>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <2>;
+			clocks = <&core_clk>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "snps,archs38";
+			reg = <3>;
+			clocks = <&core_clk>;
+		};
+	};
+
+	/* TIMER0 with interrupt for clockevent */
+	timer0 {
+		compatible = "snps,arc-timer";
+		interrupts = <16>;
+		interrupt-parent = <&core_intc>;
+		clocks = <&core_clk>;
+	};
+
+	/* 64-bit Global Free Running Counter */
+	gfrc {
+		compatible = "snps,archs-timer-gfrc";
+		clocks = <&core_clk>;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256M */
+	};
+};
diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi
new file mode 100644
index 000000000..c21d0eb07
--- /dev/null
+++ b/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013, 2014 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device tree for AXC003 CPU card: HS38x UP configuration (VDK version)
+ */
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		debug_uart: dw-apb-uart@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <2403200>;
+			interrupt-parent = <&core_intc>;
+			interrupts = <19>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+	};
+
+	mb_intc: interrupt-controller@e0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0xe0012000 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&core_intc>;
+		interrupts = < 18 >;
+	};
+
+	memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x80000000 0x40000000>;
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512MiB */
+	};
+};
diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
new file mode 100644
index 000000000..4d348853a
--- /dev/null
+++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Device tree for AXC003 CPU card:
+ * HS38x2 (Dual Core) with IDU intc (VDK version)
+ */
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	compatible = "snps,arc";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpu_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		core_intc: archs-intc@cpu {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+			#interrupt-cells = <1>;
+		};
+
+		debug_uart: dw-apb-uart@5000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x5000 0x100>;
+			clock-frequency = <2403200>;
+			interrupt-parent = <&idu_intc>;
+			interrupts = <2>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+	};
+
+	mb_intc: interrupt-controller@e0012000 {
+		#interrupt-cells = <1>;
+		compatible = "snps,dw-apb-ictl";
+		reg = < 0xe0012000 0x200 >;
+		interrupt-controller;
+		interrupt-parent = <&idu_intc>;
+		interrupts = <0>;
+	};
+
+	memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x80000000 0x40000000>;
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512MiB */
+	};
+};
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
new file mode 100644
index 000000000..0e0e2d337
--- /dev/null
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for peripherals on the AXS10x mainboard (VDK version)
+ *
+ * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/ {
+	axs10x_mb_vdk {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0xe0000000 0x10000000>;
+		interrupt-parent = <&mb_intc>;
+
+		clocks {
+			apbclk: apbclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			mmcclk: mmcclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
+			pguclk: pguclk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <25175000>;
+			};
+		};
+
+		ethernet@18000 {
+			#interrupt-cells = <1>;
+			compatible = "snps,dwmac";
+			reg = < 0x18000 0x2000 >;
+			interrupts = < 4 >;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			snps,phy-addr = < 0 >;  // VDK model phy address is 0
+			snps,pbl = < 32 >;
+			clocks = <&apbclk>;
+			clock-names = "stmmaceth";
+		};
+
+		usb@40000 {
+			compatible = "generic-ehci";
+			reg = < 0x40000 0x100 >;
+			interrupts = < 8 >;
+		};
+
+		uart@20000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20000 0x100>;
+			clock-frequency = <2403200>;
+			interrupts = <17>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart@21000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x21000 0x100>;
+			clock-frequency = <2403200>;
+			interrupts = <18>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart@22000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x22000 0x100>;
+			clock-frequency = <2403200>;
+			interrupts = <19>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+/* PGU output directly sent to virtual LCD screen; hdmi controller not modelled */
+		pgu@17000 {
+			compatible = "snps,arcpgu";
+			reg = <0x17000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
+		};
+
+/* VDK has additional ps2 keyboard/mouse interface integrated in LCD screen model */
+		ps2: ps2@e0017400 {
+			compatible = "snps,arc_ps2";
+			reg = <0x17400 0x14>;
+			interrupts = <5>;
+			interrupt-names = "arc_ps2_irq";
+		};
+
+		mmc@15000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x15000 0x400>;
+			fifo-depth = <1024>;
+			card-detect-delay = <200>;
+			clocks = <&apbclk>, <&mmcclk>;
+			clock-names = "biu", "ciu";
+			interrupts = <7>;
+			bus-width = <4>;
+		};
+	};
+
+	/*
+	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
+	 *
+	 * This node is intentionally put outside of MB above because
+	 * it maps areas outside of MB's 0xez-0xfz.
+	 */
+	uio_ev: uio@d0000000 {
+		compatible = "generic-uio";
+		reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>;
+		reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
+		interrupt-parent = <&mb_intc>;
+		interrupts = <23>;
+	};
+};
diff --git a/arch/arc/boot/dts/vdk_hs38.dts b/arch/arc/boot/dts/vdk_hs38.dts
new file mode 100644
index 000000000..cddea7eac
--- /dev/null
+++ b/arch/arc/boot/dts/vdk_hs38.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * ARC HS38 Virtual Development Kit (VDK)
+ */
+/dts-v1/;
+
+/include/ "vdk_axc003.dtsi"
+/include/ "vdk_axs10x_mb.dtsi"
+
+/ {
+	model = "snps,vdk_archs";
+	compatible = "snps,axs103";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0";
+	};
+};
diff --git a/arch/arc/boot/dts/vdk_hs38_smp.dts b/arch/arc/boot/dts/vdk_hs38_smp.dts
new file mode 100644
index 000000000..f57d1922e
--- /dev/null
+++ b/arch/arc/boot/dts/vdk_hs38_smp.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * ARC HS38 Virtual Development Kit, SMP version (VDK)
+ */
+/dts-v1/;
+
+/include/ "vdk_axc003_idu.dtsi"
+/include/ "vdk_axs10x_mb.dtsi"
+
+/ {
+	model = "snps,vdk_archs-smp";
+	compatible = "snps,axs103";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=640x480-24";
+	};
+};