KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 248 insertions, 0 deletions

diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c
new file mode 100644
index 000000000..a9816bbc9
--- /dev/null
+++ b/arch/alpha/mm/fault.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/alpha/mm/fault.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ */
+
+#include <linux/sched/signal.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+
+#define __EXTERN_INLINE inline
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+#undef  __EXTERN_INLINE
+
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/extable.h>
+#include <linux/uaccess.h>
+#include <linux/perf_event.h>
+
+extern void die_if_kernel(char *,struct pt_regs *,long, unsigned long *);
+
+
+/*
+ * Force a new ASN for a task.
+ */
+
+#ifndef CONFIG_SMP
+unsigned long last_asn = ASN_FIRST_VERSION;
+#endif
+
+void
+__load_new_mm_context(struct mm_struct *next_mm)
+{
+	unsigned long mmc;
+	struct pcb_struct *pcb;
+
+	mmc = __get_new_mm_context(next_mm, smp_processor_id());
+	next_mm->context[smp_processor_id()] = mmc;
+
+	pcb = &current_thread_info()->pcb;
+	pcb->asn = mmc & HARDWARE_ASN_MASK;
+	pcb->ptbr = ((unsigned long) next_mm->pgd - IDENT_ADDR) >> PAGE_SHIFT;
+
+	__reload_thread(pcb);
+}
+
+
+/*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to handle_mm_fault().
+ *
+ * mmcsr:
+ *	0 = translation not valid
+ *	1 = access violation
+ *	2 = fault-on-read
+ *	3 = fault-on-execute
+ *	4 = fault-on-write
+ *
+ * cause:
+ *	-1 = instruction fetch
+ *	0 = load
+ *	1 = store
+ *
+ * Registers $9 through $15 are saved in a block just prior to `regs' and
+ * are saved and restored around the call to allow exception code to
+ * modify them.
+ */
+
+/* Macro for exception fixup code to access integer registers.  */
+#define dpf_reg(r)							\
+	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-17 :	\
+				 (r) <= 18 ? (r)+11 : (r)-10])
+
+asmlinkage void
+do_page_fault(unsigned long address, unsigned long mmcsr,
+	      long cause, struct pt_regs *regs)
+{
+	struct vm_area_struct * vma;
+	struct mm_struct *mm = current->mm;
+	const struct exception_table_entry *fixup;
+	int si_code = SEGV_MAPERR;
+	vm_fault_t fault;
+	unsigned int flags = FAULT_FLAG_DEFAULT;
+
+	/* As of EV6, a load into $31/$f31 is a prefetch, and never faults
+	   (or is suppressed by the PALcode).  Support that for older CPUs
+	   by ignoring such an instruction.  */
+	if (cause == 0) {
+		unsigned int insn;
+		__get_user(insn, (unsigned int __user *)regs->pc);
+		if ((insn >> 21 & 0x1f) == 0x1f &&
+		    /* ldq ldl ldt lds ldg ldf ldwu ldbu */
+		    (1ul << (insn >> 26) & 0x30f00001400ul)) {
+			regs->pc += 4;
+			return;
+		}
+	}
+
+	/* If we're in an interrupt context, or have no user context,
+	   we must not take the fault.  */
+	if (!mm || faulthandler_disabled())
+		goto no_context;
+
+#ifdef CONFIG_ALPHA_LARGE_VMALLOC
+	if (address >= TASK_SIZE)
+		goto vmalloc_fault;
+#endif
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
+retry:
+	vma = lock_mm_and_find_vma(mm, address, regs);
+	if (!vma)
+		goto bad_area_nosemaphore;
+
+	/* Ok, we have a good vm_area for this memory access, so
+	   we can handle it.  */
+	si_code = SEGV_ACCERR;
+	if (cause < 0) {
+		if (!(vma->vm_flags & VM_EXEC))
+			goto bad_area;
+	} else if (!cause) {
+		/* Allow reads even for write-only mappings */
+		if (!(vma->vm_flags & (VM_READ | VM_WRITE)))
+			goto bad_area;
+	} else {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
+	}
+
+	/* If for any reason at all we couldn't handle the fault,
+	   make sure we exit gracefully rather than endlessly redo
+	   the fault.  */
+	fault = handle_mm_fault(vma, address, flags, regs);
+
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
+		return;
+	}
+
+	/* The fault is fully completed (including releasing mmap lock) */
+	if (fault & VM_FAULT_COMPLETED)
+		return;
+
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+
+	if (fault & VM_FAULT_RETRY) {
+		flags |= FAULT_FLAG_TRIED;
+
+		/* No need to mmap_read_unlock(mm) as we would
+		 * have already released it in __lock_page_or_retry
+		 * in mm/filemap.c.
+		 */
+
+		goto retry;
+	}
+
+	mmap_read_unlock(mm);
+
+	return;
+
+	/* Something tried to access memory that isn't in our memory map.
+	   Fix it, but check if it's kernel or user first.  */
+ bad_area:
+	mmap_read_unlock(mm);
+
+ bad_area_nosemaphore:
+	if (user_mode(regs))
+		goto do_sigsegv;
+
+ no_context:
+	/* Are we prepared to handle this fault as an exception?  */
+	if ((fixup = search_exception_tables(regs->pc)) != 0) {
+		unsigned long newpc;
+		newpc = fixup_exception(dpf_reg, fixup, regs->pc);
+		regs->pc = newpc;
+		return;
+	}
+
+	/* Oops. The kernel tried to access some bad page. We'll have to
+	   terminate things with extreme prejudice.  */
+	printk(KERN_ALERT "Unable to handle kernel paging request at "
+	       "virtual address %016lx\n", address);
+	die_if_kernel("Oops", regs, cause, (unsigned long*)regs - 16);
+	make_task_dead(SIGKILL);
+
+	/* We ran out of memory, or some other thing happened to us that
+	   made us unable to handle the page fault gracefully.  */
+ out_of_memory:
+	mmap_read_unlock(mm);
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
+
+ do_sigbus:
+	mmap_read_unlock(mm);
+	/* Send a sigbus, regardless of whether we were in kernel
+	   or user mode.  */
+	force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *) address);
+	if (!user_mode(regs))
+		goto no_context;
+	return;
+
+ do_sigsegv:
+	force_sig_fault(SIGSEGV, si_code, (void __user *) address);
+	return;
+
+#ifdef CONFIG_ALPHA_LARGE_VMALLOC
+ vmalloc_fault:
+	if (user_mode(regs))
+		goto do_sigsegv;
+	else {
+		/* Synchronize this task's top level page-table
+		   with the "reference" page table from init.  */
+		long index = pgd_index(address);
+		pgd_t *pgd, *pgd_k;
+
+		pgd = current->active_mm->pgd + index;
+		pgd_k = swapper_pg_dir + index;
+		if (!pgd_present(*pgd) && pgd_present(*pgd_k)) {
+			pgd_val(*pgd) = pgd_val(*pgd_k);
+			return;
+		}
+		goto no_context;
+	}
+#endif
+}