dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()grafted

When dma_device_put() drops the last reference on chan->device->ref,
dma_device_release() runs and may free the dma_device along with its
channels.

dma_chan_put() then still reads chan->device->owner via
dma_chan_to_owner() for the trailing module_put(). KASAN catches it:

	slab-use-after-free in dma_chan_put+0x3e6/0x4c0
	Read of size 8 by task insmod/6319
	Freed by task 6319:
	  kfree+0x225/0x470
	  dma_chan_put+0x395/0x4c0
	  dmaengine_put+0xf8/0x160

Cache the module owner in dma_chan_put() before the put so the trailing
module_put() does not need chan->device.

Fixes: 8ad342a86359 ("dmaengine: Add reference counting to dma_device struct")
Suggested-by: Sashiko <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260518-dmaengine-kref-fix-v1-1-4d6125048fb7@amd.com
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Link: https://patch.msgid.link/20260822-dmaengine-kref-fix-v5-3-d4a4ee47d927@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

1 files changed, 166 insertions, 0 deletions

diff --git a/arch/alpha/lib/memcpy.c b/arch/alpha/lib/memcpy.c
new file mode 100644
index 000000000..78b6850a9
--- /dev/null
+++ b/arch/alpha/lib/memcpy.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/alpha/lib/memcpy.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ */
+
+/*
+ * This is a reasonably optimized memcpy() routine.
+ */
+
+/*
+ * Note that the C code is written to be optimized into good assembly. However,
+ * at this point gcc is unable to sanely compile "if (n >= 0)", resulting in a
+ * explicit compare against 0 (instead of just using the proper "blt reg, xx" or
+ * "bge reg, xx"). I hope alpha-gcc will be fixed to notice this eventually..
+ */
+
+#include <linux/types.h>
+#include <linux/export.h>
+#include <linux/string.h>
+
+/*
+ * This should be done in one go with ldq_u*2/mask/stq_u. Do it
+ * with a macro so that we can fix it up later..
+ */
+#define ALIGN_DEST_TO8_UP(d,s,n) \
+	while (d & 7) { \
+		if (n <= 0) return; \
+		n--; \
+		*(char *) d = *(char *) s; \
+		d++; s++; \
+	}
+#define ALIGN_DEST_TO8_DN(d,s,n) \
+	while (d & 7) { \
+		if (n <= 0) return; \
+		n--; \
+		d--; s--; \
+		*(char *) d = *(char *) s; \
+	}
+
+/*
+ * This should similarly be done with ldq_u*2/mask/stq. The destination
+ * is aligned, but we don't fill in a full quad-word
+ */
+#define DO_REST_UP(d,s,n) \
+	while (n > 0) { \
+		n--; \
+		*(char *) d = *(char *) s; \
+		d++; s++; \
+	}
+#define DO_REST_DN(d,s,n) \
+	while (n > 0) { \
+		n--; \
+		d--; s--; \
+		*(char *) d = *(char *) s; \
+	}
+
+/*
+ * This should be done with ldq/mask/stq. The source and destination are
+ * aligned, but we don't fill in a full quad-word
+ */
+#define DO_REST_ALIGNED_UP(d,s,n) DO_REST_UP(d,s,n)
+#define DO_REST_ALIGNED_DN(d,s,n) DO_REST_DN(d,s,n)
+
+/*
+ * This does unaligned memory copies. We want to avoid storing to
+ * an unaligned address, as that would do a read-modify-write cycle.
+ * We also want to avoid double-reading the unaligned reads.
+ *
+ * Note the ordering to try to avoid load (and address generation) latencies.
+ */
+static inline void __memcpy_unaligned_up (unsigned long d, unsigned long s,
+					  long n)
+{
+	ALIGN_DEST_TO8_UP(d,s,n);
+	n -= 8;			/* to avoid compare against 8 in the loop */
+	if (n >= 0) {
+		unsigned long low_word, high_word;
+		__asm__("ldq_u %0,%1":"=r" (low_word):"m" (*(unsigned long *) s));
+		do {
+			unsigned long tmp;
+			__asm__("ldq_u %0,%1":"=r" (high_word):"m" (*(unsigned long *)(s+8)));
+			n -= 8;
+			__asm__("extql %1,%2,%0"
+				:"=r" (low_word)
+				:"r" (low_word), "r" (s));
+			__asm__("extqh %1,%2,%0"
+				:"=r" (tmp)
+				:"r" (high_word), "r" (s));
+			s += 8;
+			*(unsigned long *) d = low_word | tmp;
+			d += 8;
+			low_word = high_word;
+		} while (n >= 0);
+	}
+	n += 8;
+	DO_REST_UP(d,s,n);
+}
+
+static inline void __memcpy_unaligned_dn (unsigned long d, unsigned long s,
+					  long n)
+{
+	/* I don't understand AXP assembler well enough for this. -Tim */
+	s += n;
+	d += n;
+	while (n--)
+		* (char *) --d = * (char *) --s;
+}
+
+/*
+ * Hmm.. Strange. The __asm__ here is there to make gcc use an integer register
+ * for the load-store. I don't know why, but it would seem that using a floating
+ * point register for the move seems to slow things down (very small difference,
+ * though).
+ *
+ * Note the ordering to try to avoid load (and address generation) latencies.
+ */
+static inline void __memcpy_aligned_up (unsigned long d, unsigned long s,
+					long n)
+{
+	ALIGN_DEST_TO8_UP(d,s,n);
+	n -= 8;
+	while (n >= 0) {
+		unsigned long tmp;
+		__asm__("ldq %0,%1":"=r" (tmp):"m" (*(unsigned long *) s));
+		n -= 8;
+		s += 8;
+		*(unsigned long *) d = tmp;
+		d += 8;
+	}
+	n += 8;
+	DO_REST_ALIGNED_UP(d,s,n);
+}
+static inline void __memcpy_aligned_dn (unsigned long d, unsigned long s,
+					long n)
+{
+	s += n;
+	d += n;
+	ALIGN_DEST_TO8_DN(d,s,n);
+	n -= 8;
+	while (n >= 0) {
+		unsigned long tmp;
+		s -= 8;
+		__asm__("ldq %0,%1":"=r" (tmp):"m" (*(unsigned long *) s));
+		n -= 8;
+		d -= 8;
+		*(unsigned long *) d = tmp;
+	}
+	n += 8;
+	DO_REST_ALIGNED_DN(d,s,n);
+}
+
+#undef memcpy
+
+void * memcpy(void * dest, const void *src, size_t n)
+{
+	if (!(((unsigned long) dest ^ (unsigned long) src) & 7)) {
+		__memcpy_aligned_up ((unsigned long) dest, (unsigned long) src,
+				     n);
+		return dest;
+	}
+	__memcpy_unaligned_up ((unsigned long) dest, (unsigned long) src, n);
+	return dest;
+}
+EXPORT_SYMBOL(memcpy);