Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 250 insertions, 0 deletions

diff --git a/arch/alpha/lib/ev6-memcpy.S b/arch/alpha/lib/ev6-memcpy.S
new file mode 100644
index 000000000..3ef43c26c
--- /dev/null
+++ b/arch/alpha/lib/ev6-memcpy.S
@@ -0,0 +1,250 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/alpha/lib/ev6-memcpy.S
+ * 21264 version by Rick Gorton <rick.gorton@alpha-processor.com>
+ *
+ * Reasonably optimized memcpy() routine for the Alpha 21264
+ *
+ *	- memory accessed as aligned quadwords only
+ *	- uses bcmpge to compare 8 bytes in parallel
+ *
+ * Much of the information about 21264 scheduling/coding comes from:
+ *	Compiler Writer's Guide for the Alpha 21264
+ *	abbreviated as 'CWG' in other comments here
+ *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
+ * Scheduling notation:
+ *	E	- either cluster
+ *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
+ *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
+ *
+ * Temp usage notes:
+ *	$1,$2,		- scratch
+ */
+#include <linux/export.h>
+	.set noreorder
+	.set noat
+
+	.align	4
+	.globl memcpy
+	.ent memcpy
+memcpy:
+	.frame $30,0,$26,0
+	.prologue 0
+
+	mov	$16, $0			# E : copy dest to return
+	ble	$18, $nomoredata	# U : done with the copy?
+	xor	$16, $17, $1		# E : are source and dest alignments the same?
+	and	$1, 7, $1		# E : are they the same mod 8?
+
+	bne	$1, $misaligned		# U : Nope - gotta do this the slow way
+	/* source and dest are same mod 8 address */
+	and	$16, 7, $1		# E : Are both 0mod8?
+	beq	$1, $both_0mod8		# U : Yes
+	nop				# E :
+
+	/*
+	 * source and dest are same misalignment.  move a byte at a time
+	 * until a 0mod8 alignment for both is reached.
+	 * At least one byte more to move
+	 */
+
+$head_align:
+	ldbu	$1, 0($17)		# L : grab a byte
+	subq	$18, 1, $18		# E : count--
+	addq	$17, 1, $17		# E : src++
+	stb	$1, 0($16)		# L :
+	addq	$16, 1, $16		# E : dest++
+	and	$16, 7, $1		# E : Are we at 0mod8 yet?
+	ble	$18, $nomoredata	# U : done with the copy?
+	bne	$1, $head_align		# U :
+
+$both_0mod8:
+	cmple	$18, 127, $1		# E : Can we unroll the loop?
+	bne	$1, $no_unroll		# U :
+	and	$16, 63, $1		# E : get mod64 alignment
+	beq	$1, $do_unroll		# U : no single quads to fiddle
+
+$single_head_quad:
+	ldq	$1, 0($17)		# L : get 8 bytes
+	subq	$18, 8, $18		# E : count -= 8
+	addq	$17, 8, $17		# E : src += 8
+	nop				# E :
+
+	stq	$1, 0($16)		# L : store
+	addq	$16, 8, $16		# E : dest += 8
+	and	$16, 63, $1		# E : get mod64 alignment
+	bne	$1, $single_head_quad	# U : still not fully aligned
+
+$do_unroll:
+	addq	$16, 64, $7		# E : Initial (+1 trip) wh64 address
+	cmple	$18, 127, $1		# E : Can we go through the unrolled loop?
+	bne	$1, $tail_quads		# U : Nope
+	nop				# E : 
+
+$unroll_body:
+	wh64	($7)			# L1 : memory subsystem hint: 64 bytes at
+					# ($7) are about to be over-written
+	ldq	$6, 0($17)		# L0 : bytes 0..7
+	nop				# E :
+	nop				# E :
+
+	ldq	$4, 8($17)		# L : bytes 8..15
+	ldq	$5, 16($17)		# L : bytes 16..23
+	addq	$7, 64, $7		# E : Update next wh64 address
+	nop				# E :
+
+	ldq	$3, 24($17)		# L : bytes 24..31
+	addq	$16, 64, $1		# E : fallback value for wh64
+	nop				# E :
+	nop				# E :
+
+	addq	$17, 32, $17		# E : src += 32 bytes
+	stq	$6, 0($16)		# L : bytes 0..7
+	nop				# E :
+	nop				# E :
+
+	stq	$4, 8($16)		# L : bytes 8..15
+	stq	$5, 16($16)		# L : bytes 16..23
+	subq	$18, 192, $2		# E : At least two more trips to go?
+	nop				# E :
+
+	stq	$3, 24($16)		# L : bytes 24..31
+	addq	$16, 32, $16		# E : dest += 32 bytes
+	nop				# E :
+	nop				# E :
+
+	ldq	$6, 0($17)		# L : bytes 0..7
+	ldq	$4, 8($17)		# L : bytes 8..15
+	cmovlt	$2, $1, $7		# E : Latency 2, extra map slot - Use
+					# fallback wh64 address if < 2 more trips
+	nop				# E :
+
+	ldq	$5, 16($17)		# L : bytes 16..23
+	ldq	$3, 24($17)		# L : bytes 24..31
+	addq	$16, 32, $16		# E : dest += 32
+	subq	$18, 64, $18		# E : count -= 64
+
+	addq	$17, 32, $17		# E : src += 32
+	stq	$6, -32($16)		# L : bytes 0..7
+	stq	$4, -24($16)		# L : bytes 8..15
+	cmple	$18, 63, $1		# E : At least one more trip?
+
+	stq	$5, -16($16)		# L : bytes 16..23
+	stq	$3, -8($16)		# L : bytes 24..31
+	nop				# E :
+	beq	$1, $unroll_body
+
+$tail_quads:
+$no_unroll:
+	.align 4
+	subq	$18, 8, $18		# E : At least a quad left?
+	blt	$18, $less_than_8	# U : Nope
+	nop				# E :
+	nop				# E :
+
+$move_a_quad:
+	ldq	$1, 0($17)		# L : fetch 8
+	subq	$18, 8, $18		# E : count -= 8
+	addq	$17, 8, $17		# E : src += 8
+	nop				# E :
+
+	stq	$1, 0($16)		# L : store 8
+	addq	$16, 8, $16		# E : dest += 8
+	bge	$18, $move_a_quad	# U :
+	nop				# E :
+
+$less_than_8:
+	.align 4
+	addq	$18, 8, $18		# E : add back for trailing bytes
+	ble	$18, $nomoredata	# U : All-done
+	nop				# E :
+	nop				# E :
+
+	/* Trailing bytes */
+$tail_bytes:
+	subq	$18, 1, $18		# E : count--
+	ldbu	$1, 0($17)		# L : fetch a byte
+	addq	$17, 1, $17		# E : src++
+	nop				# E :
+
+	stb	$1, 0($16)		# L : store a byte
+	addq	$16, 1, $16		# E : dest++
+	bgt	$18, $tail_bytes	# U : more to be done?
+	nop				# E :
+
+	/* branching to exit takes 3 extra cycles, so replicate exit here */
+	ret	$31, ($26), 1		# L0 :
+	nop				# E :
+	nop				# E :
+	nop				# E :
+
+$misaligned:
+	mov	$0, $4			# E : dest temp
+	and	$0, 7, $1		# E : dest alignment mod8
+	beq	$1, $dest_0mod8		# U : life doesnt totally suck
+	nop
+
+$aligndest:
+	ble	$18, $nomoredata	# U :
+	ldbu	$1, 0($17)		# L : fetch a byte
+	subq	$18, 1, $18		# E : count--
+	addq	$17, 1, $17		# E : src++
+
+	stb	$1, 0($4)		# L : store it
+	addq	$4, 1, $4		# E : dest++
+	and	$4, 7, $1		# E : dest 0mod8 yet?
+	bne	$1, $aligndest		# U : go until we are aligned.
+
+	/* Source has unknown alignment, but dest is known to be 0mod8 */
+$dest_0mod8:
+	subq	$18, 8, $18		# E : At least a quad left?
+	blt	$18, $misalign_tail	# U : Nope
+	ldq_u	$3, 0($17)		# L : seed (rotating load) of 8 bytes
+	nop				# E :
+
+$mis_quad:
+	ldq_u	$16, 8($17)		# L : Fetch next 8
+	extql	$3, $17, $3		# U : masking
+	extqh	$16, $17, $1		# U : masking
+	bis	$3, $1, $1		# E : merged bytes to store
+
+	subq	$18, 8, $18		# E : count -= 8
+	addq	$17, 8, $17		# E : src += 8
+	stq	$1, 0($4)		# L : store 8 (aligned)
+	mov	$16, $3			# E : "rotate" source data
+
+	addq	$4, 8, $4		# E : dest += 8
+	bge	$18, $mis_quad		# U : More quads to move
+	nop
+	nop
+
+$misalign_tail:
+	addq	$18, 8, $18		# E : account for tail stuff
+	ble	$18, $nomoredata	# U :
+	nop
+	nop
+
+$misalign_byte:
+	ldbu	$1, 0($17)		# L : fetch 1
+	subq	$18, 1, $18		# E : count--
+	addq	$17, 1, $17		# E : src++
+	nop				# E :
+
+	stb	$1, 0($4)		# L : store
+	addq	$4, 1, $4		# E : dest++
+	bgt	$18, $misalign_byte	# U : more to go?
+	nop
+
+
+$nomoredata:
+	ret	$31, ($26), 1		# L0 :
+	nop				# E :
+	nop				# E :
+	nop				# E :
+
+	.end memcpy
+	EXPORT_SYMBOL(memcpy)
+
+/* For backwards module compatibility.  */
+__memcpy = memcpy
+.globl __memcpy